summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dce
AgeCommit message (Collapse)AuthorFilesLines
2019-02-19drm/amd/display: send pipe set command to dmcu when backlight is setJosip Pavic1-22/+23
[Why] Previously, a change removed code that would send a pipe set command to dmcu each time the backlight was set, as it was thought to be superfluous. However, it is possible for the backlight to be set before a valid pipe has been set, which causes DMCU to hang after a DPMS restore on some systems. [How] Send a pipe set command to DMCU prior to setting the backlight. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-19drm/amd/display: send pipe set command to dmcu when stream unblanksJosip Pavic1-15/+17
[Why] When stream is blanked, pipe set command is sent to dmcu to notify it that the abm pipe is disabled. When stream is unblanked, no notification is made to dmcu that the abm pipe has been enabled, resulting in abm not being enabled in the firmware. [How] When stream is unblanked, send a pipe set command to dmcu. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-19drm/amd/display: Raise dispclk value for dce11Roman Li1-3/+8
[Why] The visual corruption due to low display clock value. Observed on Carrizo 4K@60Hz. [How] There was earlier patch for dce_update_clocks: Adding +15% workaround also to to dce11_update_clocks Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-19drm/amd/display/dce_mem_input: Mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-18Merge v5.0-rc7 into drm-nextDave Airlie1-1/+9
Backmerging for nouveau and imx that needed some fixes for next pulls. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-06drm/amd/display: interface to check if timing can be seamlessAnthony Koo1-2/+26
[Why] Need to figure out whether a timing we want to commit matches something that GOP already programmed, in which case we can decide to some optimizations [How] 1. Add way to check for DIG FE 2. Add way to check for matching OTG timing 3. Add way to check for matching pixel clock (if possible) - Currently only support DP for pixel clock, since it is easy to calc Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-06drm/amd/display: dmcu is blocking due to wrong disable ABM commandPaul Hsieh1-2/+2
[Why] Second screen to clone/extend mode, driver will send ABM pipe command to DMCU. Change mode from clone/extend to second screen only, driver send ABM level command to disable ABM but this command will not clear ABM pipe data. At this time, change second screen to PC screen only, driver will send first command "ABM_LEVEL", it will turn on ABM with incorrect ABM pile so that DMCU is blocking. [How] When driver try to disable ABM, change command from "ABM LEVEL" to "ABM PIPE" so that it will clear ABM pile data. Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-06drm/amd/display: Use udelay when waiting between aux retriesJohn Barberiz1-1/+1
[Why] "IRQ_HPD Pulse Length Test" DP compliance test fails. Test complains that certain DPCD registers are not read within 100 ms. [How] msleep is inaccurate for small values. Used udelay instead for accuracy. Signed-off-by: John Barberiz <John.Barberiz@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-01drm/amd/display: Fix fclk idle stateRoman Li1-1/+9
[Why] The earlier change 'Fix 6x4K displays' led to fclk value idling at higher DPM level. [How] Apply the fix only to respective multi-display configuration. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-26drm/amd/display: Connect dig_fe to otg directly instead of calling bioshersen wu2-3/+15
[Why] After call bios table crtc_source_select, dal will program fmt again. The bios table program dig_source_select and other fmt register for bios usage which is redundancy and uncessary. [How] Program dig_soruce_select register directly Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-26drm/amd/display: Update DMCU versioning mechanismJosip Pavic1-3/+3
[Why] Current date based versioning doesn't tell us about feature version and build version, and is not useful for debug. [How] Add versioning based on feature and build Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: dp interlace MSA timing programming for Interlace mode.Charlene Liu1-28/+37
[Why] DP compliance box shows wrong MSA data. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Remove i2caux folderDavid Francis1-1/+3
[Why] It is huge, unmaintainable, needlessly layered, and obsolete [How] Remove it. All of it. Also remove the i2caux struct in dc_context and the code that created and destructed it Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Change from aux_engine to dce_auxDavid Francis2-540/+37
[Why] The aux_engine struct is needlessly complex and is defined multiple times. It contains function pointers that each have only one version and are called only from inside dce_aux. [How] Replace aux_engine with a new struct called dce_aux. Remove all function pointers and call functions directly. Remove unused functions Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Switch ddc to new aux interfaceDavid Francis2-0/+105
[Why] The old aux interface goes through i2caux and the aux_engine and engine function pointers. The multiple layers of indirection make it hard to tell waht is happening. The aux algorithm does not need to be this complicated: attempt to submit the request. If you get an ack (reply = 0), stop. Otherwise, retry, up to 7 times. [How] Add a new helper function in dce_aux that performs aux retries Move the plumbing of the aux calling code into dce_aux Add functions in ddc that redirect directly to dce_aux Make all aux calls use these functions Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Shift dc link aux to aux_payloadDavid Francis1-1/+2
[Why] aux_payload should be the struct used inside dc to start aux transactions. This will allow the old aux interface to be seamlessly replaced. [How] Add three fields to aux_payload: reply, mot, defer_delay This will mean that aux_payload has all data required to submit a request. Shift dc_link to use this struct Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Redefine DMCU_SCRATCH to identify DMCU stateMartin Tsai1-81/+42
[why] To resume system before entering S0i3 completely will cause PSP not reload DMCU FW since there is not HW power state change. In this case, driver cannot get correct DMCU version from IRAM since driver override it and DMCU didn't reload to update it. It makes driver return false in dcn10_dmcu_init(). [how] 1.To redefine DMCU_SCRATCH to identify different DMCU state. 2.To reserve IRAM 0xF0~0xFF write by DMCU only. 3.To remove dcn10_get_dmcu_state Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Compensate for XGMI SS downspread on dprefclkLeo Li3-3/+108
[Why] When XGMI is enabled, we need to adjust the dprefclk according to the WAFL link's spread spectrum info. This is for VG20 (DCE121) only. [How] dce_clk_mgr already stores SS info, currently being used by audio clock. Therefore, patch the clk_mgr's SS info with the xGMI SS info, if xGMI is enabled. For display clock, adjust it during dce12_update_clocks() before calling set_clock(). Since we rely on a mmhub register to reliably determine if xGMI is enabled, the patching step needs to happen after resource_construct() has initialized the hardware sequencer. Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Use local variable instead of caching globalLeo Li1-22/+15
[Why] context->bw.dce.dispclk_khz is being cached into unpatched_clock, then restored at end of function call. This is needlessly complex [How] Instead, use a local patched_clock variable. Leave context->bw.dce.dispclk_khz alone. No functional change is intended. Signed-off-by: David Francis <david.francis@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Use 100 Hz precision for pipe pixel clocksKen Chalmers4-109/+109
[Why] Users would like more accurate pixel clocks, especially for fractional "TV" frame rates like 59.94 Hz. [How] Store and communicate pixel clocks with 100 Hz accuracy from dc_crtc_timing through to BIOS command table setpixelclock call. Signed-off-by: Ken Chalmers <ken.chalmers@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: remove sink reference in dc_stream_stateJun Lei2-6/+6
[why] dc_stream_state containing a pointer to sink is poor design. Sink describes the display, and the specifications or capabilities it has. That information is irrelevant for dc_stream_state, which describes hardware state, and is generally used for hardware programming. It could further be argued that dc_sink itself is just a convenience dc provides, and DC should be perfectly capable of programming hardware without any dc_sinks (for example, emulated sinks). [how] Phase 1: Deprecate use of dc_sink pointer in dc_stream. Most references are trivial to remove, but some call sites are risky (such as is_timing_changed) with no obvious logical replacement. These will be removed in follow up change. Add dc_link pointer to dc_stream. This is the typical reason DC really needed sink pointer, and most call sites are replaced with this. DMs also need minor updates, as all 3 DMs leverage stream->sink for some functionality. this is replaced instead by a pointer to private data inside dc_stream_state, which is used by DMs as a quality of life improvment for some key functionality. it allows DMs to set pointers have to their own objects which associate OS objects to dc_stream_states (such as DisplayTarget and amdgpu_dm_connector). Without the private pointer, DMs would be forced to perform a lookup for callbacks. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: David Francis <David.Francis@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-19drm/amd/display: Raise dispclk value for PolarisRoman Li1-0/+7
[Why] The visual corruption due to low display clock value observed on some systems [How] There was earlier patch for dspclk: 'drm/amd/display: Raise dispclk value for dce_update_clocks' Adding +15% workaround also to to dce112_update_clocks Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Leo Li <Sunpeng.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-29drm/amd/display: Fix 6x4K displays light-up on Vega20Roman Li1-0/+2
[Why] More than 4x4K didn't lightup on Vega20 due to low dcfclk value. Powerplay expects valid min requirement for dcfclk from DC. [How] Update min_dcfclock_khz based on min_engine_clock value. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: Clean up dp_blank functionsDavid Francis1-13/+10
[Why] Unused variable "refresh" and incorrect comment formatting [How] Remove variable, reindent comments Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: Check for dmcu initialization before calling dmcuDavid Francis1-4/+7
[Why] DMCU firmware is not required - the system is expected to run fine without it. Therefore, wherever dmcu functions could be called, dmcu initialization shoudl be checked [How] Use the helpful hook dmcu_funcs->is_dmcu_initialized Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: expose dentist_get_divider_from_didNevenko Stupar2-1/+3
expose this functions for future use. Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Expose target backlight levelAnthony Koo1-0/+12
[Why] DM may want to understand any backlight optimizations applied, so DM needs a way to query from the HW both the real current backlight, which may be value during transition. And also target backlight, which may be after some backlight optimizations applied. [How] Add interface to query current and target backlight levels Target level may indicate backlight level after backlight optimization and reductions are applied. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Expand dc to use 16.16 bit backlightAnthony Koo1-54/+38
[Why] We want to increase precision for backlight setting. But DC interface takes 8 bit backlight level value only. [How] DMCU already takes 16 bit backlight level. Expand the DC interface to take 16.16 bit value. Max 32 bit backlight value (0xFFFF) will represent max backlight (100%) Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Add missing pipes registers for VGA enable/disableNevenko Stupar1-0/+2
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: add dccg blockDmytro Laktyushkin1-2/+5
This adds the hw block as well as hooks up dppclk dto programming Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: rename dccg to clk_mgrDmytro Laktyushkin3-205/+205
In preparation for adding the actual dccg block since the current implementation of dccg is mor eof a clock manager than a hw block Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Add link encoder dp_ycbcr420_supported feature flagEric Bernstein1-1/+1
[Why] Need separate feature flag for DP 4:2:0 support, since existing flag is used for HDMI [How] Added dp_ycbcr420_supported to struct encoder_feature_support Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: expose hwseq functions and add registersNevenko Stupar1-0/+50
Make these functions non static and define registers for future use is_lower_pipe_tree_visible(); is_upper_pipe_tree_visible(); is_pipe_tree_visible(); dcn10_program_pte_vm(); set_hdr_multiplier(); update_dchubp_dpp() find_top_pipe_for_stream() Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: split dccg clock manager into asic foldersDmytro Laktyushkin3-285/+47
Currently dccg contains code related to every dcn revision in a single file. This change splits out the dcn parts of code into correct folders Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: clean up base dccg structDmytro Laktyushkin2-20/+37
Move things not accessed outside dccg block into dce specific struct Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: move pplib/smu notification to dccg blockDmytro Laktyushkin2-235/+430
This is done to clear up the clock programming sequence since the only time we need to notify pplib is after clock update. This also renames the clk block to dccg, at the moment this block contains both clock management and dccg functionality. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-10drm/amd/display: Use proper enums in process_channel_replyNathan Chancellor1-1/+1
Clang warns when one enumerated type is implicitly converted to another. drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:315:19: warning: implicit conversion from enumeration type 'enum aux_channel_operation_result' to different enumeration type 'enum aux_transaction_reply' [-Wenum-conversion] reply->status = AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON; ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/i2caux/dce110/aux_engine_dce110.c:349:19: warning: implicit conversion from enumeration type 'enum aux_channel_operation_result' to different enumeration type 'enum aux_transaction_reply' [-Wenum-conversion] reply->status = AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON; ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The current enum is incorrect, it should be from aux_transaction_reply, so use AUX_TRANSACTION_REPLY_HPD_DISCON. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-10drm/amd/display: Raise dispclk value for dce_update_clocksNicholas Kazlauskas1-0/+5
[Why] The DISPCLK value was previously requested to be 15% higher for all ASICS that went through the dce110 bandwidth code path. As part of a refactoring of dce_clocks and dce110 set_bandwidth this was removed for power saving considerations. This changed caused corruption under certain display configurations. Originally thought to be Vega specific, it was also observed on Polaris. [How] The 15% is brought back but its placement differs from the original patch. This boost should only be enable while DFS bypass is inactive. This (like the Vega patch) is also a workaround that should be removed after the root cause is identified. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-10drm/amd/display: clean up encoding checksEric Yang1-15/+1
[Why] All ASICS we support has YCbCr support, so the check is unnecessary, the currently logic in validate output also returns true all the time, so the unneccessary logic is removed Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-10drm/amd/display: block DP YCbCr420 modesEric Yang1-0/+3
[why] Currently not supported, will black screen when set. [How] Fail validate timing helper for those modes. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-27drm/amd/display: Raise dispclk value for dce120 by 15%Nicholas Kazlauskas1-0/+3
[Why] The DISPCLK value was previously requested to be 15% higher for all ASICs that went through the dce110 bandwidth code path. As part of a refactoring of dce_clocks and the dce110 set bandwidth codepath this was removed for power saving considerations. That change caused display corruption under certain hardware configurations with Vega10. [How] The 15% DISPCLK increase is brought back but only on dce110 for now. This is should be a temporary workaround until the root cause is sorted out for why this occurs on Vega (or other ASICs, if reported). Tested-by: Nick Sarnie <sarnex@gentoo.org> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-14drm/amd/display: stop using switch for different CS revisionsDmytro Laktyushkin2-164/+214
Clock sources currently have support for asic specific function pointers. But actual separation into functions was never performed, leaving us with giant functions that rely on switch. This change creates separate functions, removing switch use. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-14drm/amd/display: Add Raven2 definitions in dcBhawanpreet Lakha1-0/+7
Add Raven2 definitions in the dc code Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-11drm/amd/display: remove unused clk_src codeDmytro Laktyushkin1-86/+1
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Flatten unnecessary i2c functionsDavid Francis1-77/+34
[Why] The dce_i2c_hw code contained four funtcions that were only called in one place and did not have a clearly delineated purpose. [How] Inline these functions, keeping the same functionality. This is not a functional change. The functions disable_i2c_hw_engine and release_engine_dce_hw were pulled into their respective callers. The most interesting part of this change is the acquire functions. dce_i2c_hw_engine_acquire_engine was pulled into dce_i2c_engine_acquire_hw, and dce_i2c_engine_acquire_hw was pulled into acquire_i2c_hw_engine. Some notes to show that this change is not functional: -Failure conditions in any function resulted in a cascade of calls that ended in a 'return NULL'. Those are replaced with a direct 'return NULL'. -The variable result is the one from dce_i2c_hw_engine_acquire_engine. The boolean result used as part of return logic was removed. -As the second half of dce_i2c_hw_engine_acquire_engine is only executed if that function is returning true and therefore exiting the do-while loop in dce_i2c_engine_acquire_hw, those lines were moved outside of the loop. Signed-off-by: David Francis <David.Francis@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Remove redundant i2c structsDavid Francis4-177/+28
[Why] The i2c code contains two structs that contain the same information as i2c_payload [How] Replace references to those structs with references to i2c_payload dce_i2c_transaction_request->status was written to but never read, so all references to it are removed Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Eliminate i2c hw function pointersDavid Francis2-345/+291
[Why] The function pointers of the dce_i2c_hw struct were never accessed from outside dce_i2c_hw.c and had only one version. As function pointers take up space and make debugging difficult, and they are not needed in this case, they should be removed. [How] Remove the dce_i2c_hw_funcs struct and make static all functions that were previously a part of it. Reorder the functions in dce_i2c_hw.c. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amdgpu/display: add support for LVDS (v5)Alex Deucher5-0/+76
This adds support for LVDS displays. v2: add support for spread spectrum, sink detect v3: clean up enable_lvds_output v4: fix up link_detect v5: remove assert on 888 format Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105880 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Combine dce80 and dce100 i2c hw functionsDavid Francis1-197/+40
[Why] There are two versions of the hw function pointers: one for dce80 and one for all other versions. These paired functions are nearly identical. dce80 and dce100 should not require different i2c access functions. [How] Combine each pair of functions into a single function. Mostly the new functions are based on the dce100 versions as those versions are newer, support more features, and were more maintained. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Create new i2c resourceDavid Francis7-2/+2078
[Why] I2C code did not match dc resource model and was generally unpleasant [How] Move code into new svelte dce_i2c files, replacing various i2c objects with two structs: dce_i2c_sw and dce_i2c_hw. Fully split sw and hw code paths. Remove all redundant declarations. Use address lists to distinguish between versions. Change dce80 code to newer register access macros. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-21 09:59:27 +0300