summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dce
AgeCommit message (Collapse)AuthorFilesLines
2021-11-03drm/amd/display: Added HPO HW control shutdown supportJake Wang1-1/+3
[Why] HPO is only used for DP2.0. HPO HW control should be disable when not being used to save power. [How] Shutdown HPO HW control during init hw. Shutdown HPO HW control during stream disable. Enable HPO HW control during stream enable if DP2.0. Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: set Layout properly for 8ch audio at timing validationGuo, Bing1-2/+4
Why: For audio packet type 0x02, there are 2 Layouts: Layout = 0 for 2 channels and Layout = 1 for > 2 channels. Layout will affect bandwidth check. Currently, for HDMI FRL, Layout field isn't set and has a default value of 0, so theoretically only 2-channel audio for audio packet type 0x02 is supported now. How: 1. Set Layout properly according to maximum audio channel numbers for audios with audio packet type 0x02. 2. 8ch LPCM audio is not supported for timing modes with v_active <= 576. Reviewed-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Bing Guo <Bing.Guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Handle I2C-over-AUX write channel status updateAric Cyr1-3/+31
[Why] When writing long AUX commands some sinks will respond will write status update requiring source to read status. [How] When a write request is replied with data (AUX_ACK_M), retry a read of write status to determine when the write is completed. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Set i2c memory to light sleep during hw initMichael Strauss1-1/+2
[WHY] i2c memory doesn't get set to light sleep on hw init as intended [HOW] Set i2c to light sleep after reg gets zeroed, ensuring memory power control doesn't get disabled for any other DIO memory Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: dc_link_set_psr_allow_active refactoringRobin Chen2-0/+21
[Why] To expose new power optimization flags to PSR interface. It allows the PSR related power features can be enabled separately base on different use scenarios. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Robin Chen <po-tchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Add missing PSR stateMikita Lipski1-0/+2
[why] PSR_STATE2b was introduced on DMCUB side, but not on the driver side, which caused convert_psr_state helper function to return PSR_STATE_INVALID. That caused visual lagging during state transition. [how] Add PSR_STATE2b to dc_psr_state and convert_psr_state Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Fix for access for ddc pin and aux engine.Meenakshikumar Somasundaram1-0/+3
[Why & How] 1. Remove unnecessary dummy interrupt source for USB4 HPD & HPD RX 2. Adjust parameter for DPCD writing of link training process of DPIA link 3. Adjust specific AUX defer delay for DPIA link Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amd/display: add cyan_skillfish display supportZhan Liu2-0/+48
[Why] add display related cyan_skillfish files in. makefile controlled by CONFIG_DRM_AMD_DC_DCN201 flag. v2: squash in clang fixes from Harry, Nathan v3: squash in missing CONFIG_DRM_AMD_DC check (Alex) Signed-off-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Jun Lei <jun.lei@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: add vsync notify to dmub for abm pauseEric Yang1-0/+21
[Why] To prevent unnecessary wake up of DMCUB when ABM is enabled without PSR enabled, driver will notify DMCUB to stop ABM's vertical interrupts if vsync is disabled and steady state is reached. [How] Send inbox message to notify ABM pause based on vsync on/off Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: fix empty debug macrosArnd Bergmann1-2/+2
Using an empty macro expansion as a conditional expression produces a W=1 warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function 'dce_aux_transfer_with_retries': drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:775:156: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 775 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER"); | ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:783:155: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 783 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_NACK"); | ^ Expand it to "do { } while (0)" instead to make the expression more robust and avoid the warning. Fixes: 56aca2309301 ("drm/amd/display: Add AUX I2C tracing.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Get backlight from PWM if DMCU is not initializedHarry Wentland1-10/+0
On Carrizo/Stoney systems we set backlight through panel_cntl, i.e. directly via the PWM registers, if DMCU is not initialized. We always read it back through ABM registers which leads to a mismatch and forces atomic_commit to program the backlight each time. Instead make sure we use the same logic for backlight readback, i.e. read it from panel_cntl if DMCU is not initialized. We also need to remove some extraneous and incorrect calculations at the end of dce_get_16_bit_backlight_from_pwm. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1666 Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Fix for null pointer access for ddc pin and aux engine.Meenakshikumar Somasundaram1-3/+9
[Why] Need a check for NULL pointer access for ddc pin and aux engine. [How] Adding a check for ddc pin and aux engine accesses. Reviewed-by: Jimmy Kizito <jimmy.kizito@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Add DPCD writes at key pointsLeo (Hanghong) Ma1-0/+2
This reverts commit "Revert "Add DPCD writes at key points" ". The following patch will fix the system hang issue. v2: squash in indentation warning fix Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: add missing ABM register offsetsJosip Pavic1-0/+16
[Why] Some ABM registers don't exist on DCN 3.01, so are missing from its register offset list. However, this list was copied to later versions of DCN that do have these registers. As a result, they're inaccessible from the driver on those DCN versions even though they exist. [How] Add the missing ABM register offsets to DCN 3.02+ Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: use do-while-0 for DC_TRACE_LEVEL_MESSAGE()Randy Dunlap1-1/+1
Building with W=1 complains about an empty 'else' statement, so use the usual do-nothing-while-0 loop to quieten this warning. ../drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:113:53: warning: suggest braces around empty body in an 'else' statement [-Wempty-body] 113 | *state, retry_count); Fixes: b30eda8d416c ("drm/amd/display: Add ETW log to dmub_psr_get_state") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Wyatt Wood <wyatt.wood@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: Add AUX I2C tracing.Ashley Thomas1-9/+183
[Why] Developers can find it useful if the driver can produce AUX traces without special equipment. [How] Add AUX tracing. Reviewed-by: Zhan Liu <zhan.liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Add ETW log to dmub_psr_get_stateWyatt Wood1-3/+14
[Why] GPINT commands have the lowest priority in DMCUB, so it's possible that the command isn't processed in time. [How] Add a log to help identify this case. Reviewed-by: Koo Anthony <Anthony.Koo@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Add ETW logging for AUX failuresWyatt Wood1-0/+8
[Why] Would like to identify the cause of AUX transactions failing via ETW logs. [How] Add ETW logging for AUX failures. Reviewed-by: Pavic Josip <Josip.Pavic@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Fix PSR command versionMikita Lipski1-2/+2
[why] For dual eDP when setting the new settings we need to set command version to DMUB_CMD_PSR_CONTROL_VERSION_1, otherwise DMUB will not read panel_inst parameter. [how] Instead of PSR_VERSION_1 pass DMUB_CMD_PSR_CONTROL_VERSION_1 Reviewed-by: Wood Wyatt <Wyatt.Wood@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: implement workaround for riommu related hangEric Yang1-1/+3
[Why] During S4/S5/reboot, sometimes riommu invalidation request arrive too early, DCN may be unable to respond to the invalidation request resulting in pstate hang. [How] VBIOS will force allow pstate for riommu invalidation and driver will clear it after powering down display pipes. Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-22drm/amdgpu/display: fold DRM_AMD_DC_DCN3_1 into DRM_AMD_DC_DCNAlex Deucher1-6/+0
No need for a separate flag now that DCN3.1 is not in bring up. Fold into DRM_AMD_DC_DCN like previous DCN IPs. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-22drm/amd/display: get refclk from MICROSECOND_TIME_BASE_DIV HW registerCharlene Liu2-3/+13
[why] recent VBIOS dce_infotable reference clock change caused a I2c regression. instead of relying on vbios, let's get it from HW directly. Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-19drm/amd/display: Fix fall-through warning for ClangGustavo A. R. Silva1-1/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix the following warning by replacing a /* fall through */ comment with the new pseudo-keyword macro fallthrough: rivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:672:4: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] case AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER: ^ Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings, so in order to globally enable -Wimplicit-fallthrough for Clang, these comments need to be replaced with fallthrough; in the whole codebase. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-16drm/amd/display: Do not count I2C DEFERs with AUX DEFERsWesley Chalmers1-1/+2
[WHY] DP 2.0 SCR specifies that "A DPTX shall distinguish I2C_DEFER|AUX_ACK from AUX_DEFER. AUX retries due to I2C_DEFER are not counted as part of minimum 7 retires (sic) upon AUX_DEFER’s" Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-16drm/amd/display: 7 retries + 50 ms timeout on AUX DEFERWesley Chalmers1-3/+15
[WHY] DP 2.0 SCR specifies that TX devices must retry at least 7 times when receiving an AUX DEFER reply from RX. In addition, the specification states that the TX shall not retry indefinitely, and gives a suggestive timeout interval of 50ms. [HOW] Keep retrying until both 7 or more retries have been made, and the 50ms interval has passed. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-16drm/amd/display: Rename constantWesley Chalmers1-3/+3
[WHY] 7 is the minimum number of retries TX must attempt on an AUX DEFER, not the maximum. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08drm/amd/display: Enable PSR Residency for multiple panelsMikita Lipski2-4/+6
[why] Allow specifying which panel to take PSR Residency measurements from. [how] Pass panel instance to DMUB through GPINT in the upper 8 bits of the parameter. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08drm/amd/display: Enabling PSR support for multiple panelsMikita Lipski2-16/+32
[why] Updating PSR interfaces to allow PSR enablement per eDP panel. [how] - Copying PSR command structures to DC - Changing function interfaces to pass panel instance - Communicating with DMUB per link instead of assuming to use a single one -Iterating through all PSR capable panels when enabling/disabling all Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-04drm/amd/display: Add DCN3.1 HWSEQNicholas Kazlauskas1-2/+19
Add DCN3.1 specific hardware sequence programming - extending off of our existing DCN3/DCN2 support. Extend stream hardware sequencing to include new DCCG programming. Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-04drm/amd/display: Fix uninitialized field when expanding macro ↵Leslie Shi1-0/+1
MI_DCE12_MASK_SH_LIST Add back. Fixes: 0cadcf7c100161 ("drm/amd/display/dc/dce/dce_mem_input: Remove duplicate initialisation of GRPH_CONTROL__GRPH_NUM_BANKS_{SHIFT, MASK}") Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display: Make assert in DCE's program_bit_depth_reduction more lenient.Mario Kleiner1-2/+2
This is needed to avoid warnings with linebuffer depth 36 bpp. Testing on a Polaris11, DCE-11.2 on a 10 bit HDR-10 monitor showed no obvious problems, and this 12 bpc limit is consistent with what other function in the DCE bit depth reduction path use. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display: Increase linebuffer pixel depth to 36bpp.Mario Kleiner1-2/+4
Testing with the photometer shows that at least Raven Ridge DCN-1.0 does not achieve more than 10 bpc effective output precision with a 16 bpc unorm surface of type SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616, unless linebuffer depth is increased from LB_PIXEL_DEPTH_30BPP to LB_PIXEL_DEPTH_36BPP. Otherwise precision gets truncated somewhere to 10 bpc effective depth. Strangely this increase was not needed on Polaris11 DCE-11.2 during testing to get 12 bpc effective precision. It also is not needed for fp16 framebuffers. Tested on DCN-1.0 and DCE-11.2. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display: Add support for SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616.Mario Kleiner1-0/+2
Add the necessary format definition, bandwidth and pixel size mappings, prescaler setup, and pixelformat selection, following the logic already present for SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616. The new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 is implemented as the old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 format, but with swapped red <-> green color channel, by use of the hardware xbar. Please note that on the DCN 1/2/3 display engines, the pixelformat in hubp and dpp setup for the old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 and the new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 was changed from format id 22 to id 26. See amd/include/navi10_enum.h for the meaning of the id's. For format 22, the display engine read the framebuffer in 16 bpc format, but truncated to the 12 bpc actually supported by later pipeline stages. However, the engine took the 12 LSB of each color component for truncation, which is incompatible with rendering at least under Vulkan, where content is 16 bit wide, and a 12 MSB alignment would be appropriate, if any. Format 20 for ARGB16161616_12MSB does work, but even better, we can choose format 26 for ARGB16161616_UNORM, keeping all 16 bits around until later stages of the display pipeline. This allows to directly consume what the rendering hw produces under Vulkan for swapchain format VK_FORMAT_R16G16B16A16_UNORM, as tested with a patched version of the current AMD open-source amdvlk driver which maps swapchain format VK_FORMAT_R16G16B16A16_UNORM onto DRM_FORMAT_XBGR16161616. The old id 22 would cause colorful pixeltrash to be displayed instead. Tested under DCN-1.0 and DCE-11.2. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display/dc/dce/dce_mem_input: Remove duplicate initialisation of ↵Lee Jones1-1/+0
GRPH_CONTROL__GRPH_NUM_BANKS_{SHIFT, MASK Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:29: drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7270:45: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS__SHIFT’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:264:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:657:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7270:45: note: (near initialization for ‘mi_shifts.GRPH_NUM_BANKS’) drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS__SHIFT’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:264:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:657:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7269:43: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS_MASK’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:264:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:662:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7269:43: note: (near initialization for ‘mi_masks.GRPH_NUM_BANKS’) drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS_MASK’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:264:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:662:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’ Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mauro Rossi <issor.oruam@gmail.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display/dc/dce/dce_mem_input: Remove duplicate initialisation of ↵Lee Jones1-1/+0
GRPH_CONTROL__GRPH_NUM_BANKS_{SHIFT, MASK} Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:29: drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7270:45: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS__SHIFT’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:265:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:657:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7270:45: note: (near initialization for ‘mi_shifts.GRPH_NUM_BANKS’) drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS__SHIFT’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:265:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:657:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7269:43: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS_MASK’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:265:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:662:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7269:43: note: (near initialization for ‘mi_masks.GRPH_NUM_BANKS’) drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS_MASK’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:265:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:662:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’ Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mauro Rossi <issor.oruam@gmail.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display/dc/dce/dmub_outbox: Convert over to kernel-docLee Jones1-13/+4
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_outbox.c:30: warning: Cannot understand ***************************************************************************** Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display: Implement INBOX0 usage in driverAlvin Lee2-0/+11
[Why] Start using INBOX0 for HW Lock command [How] - Implement initial interface for INBOX0 HW lock message Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display: Added support for individual control for multiple ↵Jake Wang1-7/+3
back-light instances. [Why & How] Added support for individual control for multiple back-light instances. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-20drm/amd/display: Initial DC support for Beige GobyAurabindo Pillai2-0/+52
[Why&How] Add Beige Goby (DCN303) resource, irq service, & dmub loader. v2: fix nbio include (Alex) Signed-off-by: Chris Park <Chris.Park@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-11drm/amd/display: Support for DMUB AUXJude Shih2-0/+22
[WHY] To process AUX transactions with DMUB using inbox1 and outbox1 mail boxes. [How] 1) Added inbox1 command DMUB_CMD__DP_AUX_ACCESS to issue AUX commands to DMUB in dc_process_dmub_aux_transfer_async(). DMUB processes AUX cmd with DCN and sends reply back in an outbox1 message triggering an outbox1 interrupt to driver. 2) In existing driver implementation, AUX commands are processed synchronously by configuring DCN reg. But in DMUB AUX, driver sends an inbox1 message and waits for a conditional variable (CV) which will be signaled by outbox1 ISR. 3) DM will retrieve Outbox1 message and send back reply to upper layer and complete the AUX command Signed-off-by: Jude Shih <shenshih@amd.com> Reviewed-by: Hanghong Ma <Hanghong.Ma@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-29drm/amd/display: Added multi instance support for ABMJake Wang1-0/+30
[WHY & HOW] ABM assumes only 1 eDP is connected. Refactored existing ABM interface to support multiple instances. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <waynelin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Fix DSC enable sequenceMike Hsieh1-0/+2
[Why] DSC is enabled before reset link and potentially cause DSC enable fail problem. [How] Enable DSC after link is reseted Signed-off-by: Mike Hsieh <chun-wei.hsieh@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Retry getting PSR state if command times outWyatt Wood1-11/+18
[Why] GPINT command to get PSR state from FW times out. [How] Add retry to get valid PSR state. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: use GFP_ATOMIC in dcn20_resource_constructNirmoy Das2-4/+4
Replace GFP_KERNEL with GFP_ATOMIC as dcn20_resource_construct() can't sleep. Partially fixes: https://bugzilla.kernel.org/show_bug.cgi?id=212311 as dcn20_resource_construct() also calls into SMU functions which does mutex_lock(). Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-05drm/amd/display: remove redundant initialization of variable statusColin Ian King1-1/+1
The variable status is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-05drm/amd/display: Process crc window at DMCUWayne Lin1-0/+84
[Why & How] Add additional MCP_SCP commands for starting/stopping updaing crc window at DMCU Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-03drm/amd/display/dc/dce/dce_aux: Remove duplicate line causing 'field ↵Lee Jones1-1/+0
overwritten' issue Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:59: drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10014:58: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE__SHIFT’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:177:2: note: in expansion of macro ‘DCE_AUX_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10014:58: note: (near initialization for ‘aux_shift.AUX_SW_AUTOINCREMENT_DISABLE’) drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE__SHIFT’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:177:2: note: in expansion of macro ‘DCE_AUX_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10013:56: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE_MASK’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:181:2: note: in expansion of macro ‘DCE_AUX_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10013:56: note: (near initialization for ‘aux_mask.AUX_SW_AUTOINCREMENT_DISABLE’) drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE_MASK’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’ Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-02drm/amd/display: Fix 64 bit divisions on 32 bit platforms by using div64 APIVladimir Stempen1-3/+3
[why] Synchronization displays with different timings feature uses division operator for 64 bit division, which is not supported by 32 bit platforms [how] Use div64 API for 64 bit division Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com> Tested-by: Bindu Ramamurthy<bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-02drm/amd/display: Return invalid state if GPINT times outWyatt Wood1-5/+10
[Why] GPINT timeout is causing PSR_STATE_0 to be returned when it shouldn't. We must guarantee that PSR is fully disabled before doing hw programming on driver-side. [How] Return invalid state if GPINT command times out. Let existing retry logic send the GPINT until successful. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-02drm/amd/display: Refactored DC interfaces to support multiple eDPJake Wang1-0/+1
[Why & How] Some existing DC interfaces are optimized to return a single eDP link/stream. Refactored those DC interfaces to support multiple eDP. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-20 13:43:49 +0300