summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dce110
AgeCommit message (Collapse)AuthorFilesLines
2019-05-31drm/amd/display: disable PSR/ABM before destroy DMCU structPaul Hsieh1-0/+5
[Why] 1. DMCU is not running on some platform but driver still send ABM command. It may cause assert due to DMCU is not alive. 2. To make sure PSR disable when driver disable [How] 1. Add dmcu_is_running in ABM struct, driver can check this flag to determine driver should send ABM command or not. 2. Send PSR disable command when destroy PSR Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Disable audio stream only if it's currently enabledEryk Brol1-0/+10
[Why] Previously there were 2 consecutive calls being made to disable audio stream. The first one disabled the audio stream, and the second one went through and also tried to disable the audio stream causing BACO entry issues due to the ASIC appearing busy. [How] 1. Add a status field to the audio struct which stores enabled/disabled info 2. In the calls to enable/disable audio stream check if we're already in the desired state before executing the function Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: make clk mgr soc specificEric Yang2-29/+3
[Why] First step of refactoring clk mgr to better handle different ways of handling clock operations. Clock operation policies are soc specific and not just DCN vesion specific. It is not a hw resource, should not be in the resource pool. [How] Change clock manager creation to be based on HW internal ID, rename clock manager members to be more clear. Move clock manager out of resource. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Engine-specific encoder allocationWesley Chalmers2-1/+39
[WHY] From DCE110 onward, we have the ability to assign DIG BE and FE separately for any display connector type; before, we could only do this for DP. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: enabling stream after HPD low to high happenedCharlene Liu1-1/+3
[Why] 1. No real HPD plug in/out but HPD happens, the driver notifies OS connection changed. 2. No display in target. When HPD goes low to high, the driver should regard as HPD and enter setmode flow. [How] In this case, even stream didn't change but still retrain. Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Remove DPMS state dependency for fast bootSivapiriyanKumarasamy1-50/+35
[Why] The DPMS state of a display should not impact whether we want to enable fast boot. Currently fast boot is not enabled when resuming from S4 because of this. [How] Remove check for DPMS state when determining if fast boot can be applied. Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: stop external access to internal optc sync paramsDmytro Laktyushkin5-0/+25
These are internal otg params and should be handled as such. Thich change passes the params as function arguments. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Fill prescale_params->scale for RGB565Nicholas Kazlauskas1-0/+3
[Why] An assertion is thrown when using SURFACE_PIXEL_FORMAT_GRPH_RGB565 formats on DCE since the prescale_params->scale wasn't being filled. Found by a dmesg-fail when running the igt@kms_plane@pixel-format-pipe-a-planes test on Baffin. [How] Fill in the scale parameter. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-15drm/amd/display: Add fast_validate parameterJoshua Aberback1-1/+2
Add a fast_validate parameter in dc_validate_global_state for future use Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-15drm/amd/display: expand plane caps to include fp16 and scaling capabilityJun Lei1-2/+36
[why] there are some scaling capabilities such as fp16 which are known to be unsupported on a given ASIC. exposing these static capabilities allows much simpler implementation for OS interfaces which require to report such static capabilities to reduce the number of dynamic validation calls [how] refactor the existing plane caps to be more extensible, and add fp16 and scaling capabilities Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-10drm/amd/display: fix clk_mgr namingDmytro Laktyushkin1-2/+2
clk_mgr is called dccg in dc_state, this change fixes that Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-03drm/amd/display: Fix multi-thread writing to 1 stateAidan Wood2-38/+38
[Why] Multiple threads were writing back to one global VBA in DC resulting in multiple threads overwriting eachother's data [How] Add an instance of DML (which contains VBA) to each context and change all calls that used dc->dml to use context->dml. Created a seperate copy constructor for linux in a case where there is no access to DC. Signed-off-by: Aidan Wood <Aidan.Wood@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-28drm/amd/display: use dc_is_virtual instead of ENUMEric Bernstein1-1/+1
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-21drm/amd/display: add missing opp programming for odmDmytro Laktyushkin1-1/+1
A number of places opp programming was missing for odm second pipe. This change fixes the oversight. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-21drm/amd/display: Fix DP audio regressionWesley Chalmers1-3/+2
Audio was unmuted for HDMI only, need to do so for DP as well. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-21drm/amd/display: fix DP 422 VID_M half the rate issue.Charlene Liu1-2/+1
[Description] when programming VID_TIMING, we were using the original VESA timing for DP_VIDM/N. for YCbCr420 or compressed YCbCr422, using half rate as YCbCr444. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-21drm/amd/display: Fix setting DP_VID_N_MULEric Bernstein1-0/+1
[Why] Need to set VID_N_MUL for 4:2:0 cases [How] Move setting to enc1_stream_encoder_dp_unblank and ensure it is also set for non-4:2:0 cases. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amd/display: fix up reference clock abstractionsJun Lei1-1/+1
[why] "reference clock" is a very overloaded variable in DC and causes confusion as there are multiple sources of reference clock, which may be different values incorrect input values to DML will cause DCHUB to be programmed improperly and lead to hard to debug underflow issues [how] instead of using ref clock everywhere, specify WHICH ref clock: - xtalin - dccg refclk - dchub refclk these are all distinct values which may not be equal Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: David Francis <David.Francis@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amd/display: Rename is_hdmi to is_hdmi_tmds typeEric Bernstein1-7/+8
HDMI has TMDS and FRL signal types. Be specific about what is used. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amd/display: Add plane capabilities to dc_capsNicholas Kazlauskas1-0/+20
[Why] The current dc_caps doesn't provide the information needed to determine the count and type of each plane to be exposed to userspace. There are three types of DRM planes that are exposed to userspace: 1. Primary planes (can be used for modesetting) 2. Overlay planes (can be blended below or above a primary plane) 3. Cursor planes (blended topmost) We need to know the number and type of each in amdgpu_dm to expose to userspace. Hardware supports blending planes below, above or both ways depending on the ASIC. Alpha support is also ASIC dependent. Some hardware has dedicated pipes for overlays and other hardware combines the pipes. All of this should be exposed in a way that DM can query and use. [How] Introduce the dc_plane_cap structure that describes the capabilities for the hw planes. It describes: - the type of the plane - whether the plane can blend with planes below it - whether the plane can blend with planes above it - whether the plane supports per pixel alpha blending - supported formats on the plane (partial list for now) Pre DCN ASICs don't have their full capabilities described for now. They can be updated as needed in the future. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-05drm/amd/display: make seamless boot work genericallyAnthony Koo1-0/+3
[Why] Seamless boot code not working on all ASICs because of some underflow issues caused by some uninitialized HW state. [How] Keep some logical and power gating init code in hw_init. Move some per pipe init code to enable accelerated mode Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-05drm/amd/display: PPLIB HookupJun Lei1-9/+28
[Why] Make dml and integration with pplib clearer. [How] Change the way the dml formula is initialized to make its values more clear. Restructure DC interface with pplib into rv_funcs. Cap clocks received from pplib. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-19drm/amd/display: Refactor for setup periodic interrupt.Yongqiang Sun1-4/+2
[Why] Current periodic interrupt start point calc in optc is not clear. [How] 1. DM convert delta time to lines number and dc will calculate the start position as per lines number and interrupt type. 2. hwss calculates the start point as per line offset. 3. optc programs vertical interrupts register as per start point and interrupt source. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-19drm/amd/display: Ungate stream before programming registersGary Kattan1-0/+6
[Why] Certain tests fail after a fresh reboot. This is caused by writing to registers prior to ungating the stream we're trying to program. [How] Make sure the stream is ungated before writing to its registers. This also enables power-gating plane resources before init_hw initializes them. Additionally, this does some refactoring to move gating/ungating from enable/disable_plane functions to where stream resources are enabled/disabled. Signed-off-by: Gary Kattan <gary.kattan@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-19drm/amd/display: remove screen flashes on seamless bootAnthony Koo1-1/+9
[Why] We want boot to desktop to be seamless [How] During init pipes, avoid touching the pipes where GOP has already enabled the HW to the state we want. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-06drm/amd/display: add n_vid_mul and half pix_rate for odmDmytro Laktyushkin1-2/+2
Dp needs half container rate to properly support odm Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-06drm/amd/display: refactor init_hw to isolate pipe related initAnthony Koo1-0/+6
[Why] Pipe related init is possible to optimized if we know what we intend to program, and if we can determine it matches what is already programmed for the pipe. [How] First step is to isolate the pipe related init code Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-06drm/amd/display: refactor programming of DRRAnthony Koo1-16/+15
[Why] Keep enable_stream_timing programming only timing related stuff. [How] Move DRR and static screen mask programming from enable_stream_timing to outside in apply_single_controller_ctx_to_hw Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-06drm/amd/display: add seamless boot flag to streamAnthony Koo1-1/+3
[Why] If we determine the stream we are trying to commit matches HW, we want to try to optimize. [How] Try to acquire the HW resources that are already enabled and optimize. Also skip backend reprogramming Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-06drm/amd/display: refactor out programming of vupdate interruptAnthony Koo1-0/+5
[Why] More clearly isolate the code that is involved in programming of vupdate interrupt [How] Add function for programming of vupdate interrupt. Call it after timing is programmed. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-06drm/amd/display: Use context parameters to enable FBCShirish S1-1/+1
[What] FBC fails to get enabled when switched between LINEAR(console/VT) and non-LINEAR(GUI) based rendering due to default value of tiling info stored in the current_state which is used for deciding whether or not to turn FBC on or off. [How] Use context structure's tiling information which is coherant with the screen updates. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-26drm/amd/display: Connect dig_fe to otg directly instead of calling bioshersen wu1-51/+3
[Why] After call bios table crtc_source_select, dal will program fmt again. The bios table program dig_source_select and other fmt register for bios usage which is redundancy and uncessary. [How] Program dig_soruce_select register directly Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-26drm/amd/display: take dpms_off into account for edp turn off logicEric Yang1-4/+8
[why] Previously we incorrectly skipped backlight control when stream is present but dpms_off = true. This causes backlight to remain on in the we boot up or resume into a external display only configuration where VBIOS posted on the eDP. [How] Add dpms_off into the condition for edp need to turn off. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-26revert "drm/amd/display: Add condition to sync eDP SW status and HW status"Eric Yang1-15/+0
[Why] This change causes regression for S4 resume where gamma is not programmed. The change incorrectly updates the requested dpms_off state. This reverts commit d2b1d6bbc56afab8ebae9d52d7ca0ea3569bd600. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-26drm/amd/display: fix eDP fast bootup for pre-raven asichersen wu1-0/+2
[Why] For fastboot, Bios will light up eDP before SW driver is loaded. SW driver will check if eDP is lit by bios through reading the BIOS_SCRATCH_3 register. If lit, SW driver will not power down eDP power and phy to save time. Definition of BIOS_SCRATCH_3 are missing for pre-raven asic. This causes eDP fast boot to not work property. For some eDP panels, even if dp tx sends NoVideoStream_flag =1 and dpcd 0x600=2, eDP rx may not handle properly. This may cause a short flash on screen. [How] Add definition of BIOS_SCRATCH_3 for all asic Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Yongqiang Sun <yongqiang.sun@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Change from aux_engine to dce_auxDavid Francis1-1/+1
[Why] The aux_engine struct is needlessly complex and is defined multiple times. It contains function pointers that each have only one version and are called only from inside dce_aux. [How] Replace aux_engine with a new struct called dce_aux. Remove all function pointers and call functions directly. Remove unused functions Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: fix PME notification not working in RV desktopCharlene Liu1-1/+6
[Why] PPLIB not receive the PME when unplug. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Fix missing hwss function for dceJoshua Aberback1-0/+23
[Why] The driver will crash on dce hardware due to a null function pointer. [How] - bring back "program_csc_matrix" functionality as "program_output_csc" for dce110 - dce110 doesn't use the "opp_id" parameter, so use 0 when there's no hubp Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14amdgpu/dc: remove various variables that are defined but never usedColin Ian King1-2/+0
There are several variables that are defined and never used and hence can be removed. Remove them. Cleans up clang -Wunused-const-variable warnings: warning: ‘dvi_hdmi_dongle_signature_str’ defined but not used warning: ‘dce11_one_lpt_channel_max_resolution’ defined but not used warning: ‘ddc_hw_status_addr’ defined but not used Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Use 100 Hz precision for pipe pixel clocksKen Chalmers2-15/+15
[Why] Users would like more accurate pixel clocks, especially for fractional "TV" frame rates like 59.94 Hz. [How] Store and communicate pixel clocks with 100 Hz accuracy from dc_crtc_timing through to BIOS command table setpixelclock call. Signed-off-by: Ken Chalmers <ken.chalmers@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: remove sink reference in dc_stream_stateJun Lei2-17/+11
[why] dc_stream_state containing a pointer to sink is poor design. Sink describes the display, and the specifications or capabilities it has. That information is irrelevant for dc_stream_state, which describes hardware state, and is generally used for hardware programming. It could further be argued that dc_sink itself is just a convenience dc provides, and DC should be perfectly capable of programming hardware without any dc_sinks (for example, emulated sinks). [how] Phase 1: Deprecate use of dc_sink pointer in dc_stream. Most references are trivial to remove, but some call sites are risky (such as is_timing_changed) with no obvious logical replacement. These will be removed in follow up change. Add dc_link pointer to dc_stream. This is the typical reason DC really needed sink pointer, and most call sites are replaced with this. DMs also need minor updates, as all 3 DMs leverage stream->sink for some functionality. this is replaced instead by a pointer to private data inside dc_stream_state, which is used by DMs as a quality of life improvment for some key functionality. it allows DMs to set pointers have to their own objects which associate OS objects to dc_stream_states (such as DisplayTarget and amdgpu_dm_connector). Without the private pointer, DMs would be forced to perform a lookup for callbacks. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: David Francis <David.Francis@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-19drm/amd/display: fix YCbCr420 blank colorEric Yang1-1/+10
[Why] YCbCr420 packing format uses two chanels for luma, and 1 channel for both chroma component. Our previous implementation did not account for this and results in every other pixel having very high luma value, showing greyish color instead of black. YCbCr444 = <Y1, Cb1, Cr1>; <Y2, Cb2, Cr2> ..... YCbCr420 = <Y1, Y2, Cb1>; <Y3, Y4, Cr1> ..... [How] Program the second channel with the black color value for luma as well. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Hugo Hu <Hugo.Hu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30drm/amd/display: fbc state could not reach while enable fbchersen wu2-83/+65
[WHY] fbc is within the data path from memory to dce. while re-configure mc dmif, fbc should be enabled. otherwise, fbc may not be enabled properly. [HOW] before re-configure mc dmif, disable fbc, only after dmif re-configuration fully done, enable fbc again. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/display: Remove dc_stream_state->statusDavid Francis1-1/+1
[Why] dc_state has an array of dc_stream_status that contain pointers to the dc_plane_state and other useful information Confusingly, dc_stream_state also contains a dc_stream_status called status. This struct was partially initialized and used in a few places [How] stream->status.link has been replaced with stream->sink->link. If a stream does not have a sink, or a sink does not have a link, something has gone seriously wrong All other properties of stream->status were zeroed by kzalloc and never initialized, so they have been replaced by the number 0 This is a refactor: no functional change is intended Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu/display/dce11: only enable FBC when selectedAlex Deucher1-1/+2
Causes a black screen on a Stoney laptop. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108577 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-08drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2)Alex Deucher1-1/+6
The value is dependent on whether fbc is available. v2: only check if num_pipes is valid Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Add condition to sync eDP SW status and HW statusLewis Huang1-0/+15
[Why] Need to disable EDP backlight when enter S4 with EDP only and resume from S4 with secondary only. [How] Align the real hw and sw state via vBios scratch register in function enable_accelerated_mode when resume from S4. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Remove program_csc_matrixKrunoslav Kovac1-23/+0
[Why] On DCN1/DCE, There are two functions programming OCSC: program_csc_matrix and program_output_csc. They do the same thing. [How] Consolidate to use only program_output_csc. Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Expand dc to use 16.16 bit backlightAnthony Koo1-1/+0
[Why] We want to increase precision for backlight setting. But DC interface takes 8 bit backlight level value only. [How] DMCU already takes 16 bit backlight level. Expand the DC interface to take 16.16 bit value. Max 32 bit backlight value (0xFFFF) will represent max backlight (100%) Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Fix up coverity issuesAric Cyr1-3/+3
[Why] Coverity found various high-impact issues that need resolving. [How] Fix some buffer overruns and uninitialized variables. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-22 14:53:43 +0300