summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/amdgpu_dm
AgeCommit message (Collapse)AuthorFilesLines
2024-02-22drm/amd/display: adjust few initialization order in dmWayne Lin1-19/+18
[Why] Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work" when boot up with a mst tbt4 dock connected. After analyzing, there are few parts needed to be adjusted: 1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox hpd_irq handler get registered which causes the error message. 2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not aligned with legacy interface sequence [How] Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler registration into register_hpd_handlers() to align other interfaces and get hpd_rx_offload_wq[].aconnector initialized earlier than that. Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that while calling dc_link_detect(). USB4 connection status will be proactively detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device() Cc: Stable <stable@vger.kernel.org> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22Merge tag 'amd-drm-next-6.9-2024-02-19' of ↵Dave Airlie1-17/+31
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.9-2024-02-19: amdgpu: - ATHUB 4.1 support - EEPROM support updates - RAS updates - LSDMA 7.0 support - JPEG DPG support - IH 7.0 support - HDP 7.0 support - VCN 5.0 support - Misc display fixes - Retimer fixes - DCN 3.5 fixes - VCN 4.x fixes - PSR fixes - PSP 14.0 support - VA_RESERVED cleanup - SMU 13.0.6 updates - NBIO 7.11 updates - SDMA 6.1 updates - MMHUB 3.3 updates - Suspend/resume fixes - DMUB updates amdkfd: - Trap handler enhancements - Fix cache size reporting - Relocate the trap handler radeon: - fix typo in print statement Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240219214810.4911-1-alexander.deucher@amd.com
2024-02-15drm/amd/display: Preserve original aspect ratio in create streamTom Chung1-0/+2
[Why] The original picture aspect ratio in mode struct may have chance be overwritten with wrong aspect ratio data in create_stream_for_sink(). It will create a different VIC output and cause HDMI compliance test failed. [How] Preserve the original picture aspect ratio data during create the stream. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-15drm/amd/display: Fix possible NULL dereference on device remove/driver unloadSrinivasan Shanmugam1-1/+1
As part of a cleanup amdgpu_dm_fini() function, which is typically called when a device is being shut down or a driver is being unloaded The below error message suggests that there is a potential null pointer dereference issue with adev->dm.dc. In the below, line of code where adev->dm.dc is used without a preceding null check: for (i = 0; i < adev->dm.dc->caps.max_links; i++) { To fix this issue, add a null check for adev->dm.dc before this line. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943) Fixes: 006c26a0f1c8 ("drm/amd/display: Fix crash on device remove/driver unload") Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-15drm/amdgpu: make damage clips support configurableHamza Mahfooz1-0/+7
We have observed that there are quite a number of PSR-SU panels on the market that are unable to keep up with what user space throws at them, resulting in hangs and random black screens. So, make damage clips support configurable and disable it by default for PSR-SU displays. Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-15drm/amd/display: Add shared firmware state for DMUB IPS handshakeNicholas Kazlauskas1-1/+2
[Why] Read modify write hazards can occur when using a single shared scratch register between driver and firmware leading to driver accessing DCN in IPS2 and a system hang. [How] Add infrastructure for using REGION6 as a shared firmware state between driver and firmware. This region is uncachable. Replace the existing get/set idle calls with reads/writes to the (volatile) shared firmware state blocks that a separated by at least a cache line between firmware and driver. Remove the workarounds that required rewriting/checking read modify write hazards. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-15drm/amd/display: Preserve original aspect ratio in create streamTom Chung1-0/+2
[Why] The original picture aspect ratio in mode struct may have chance be overwritten with wrong aspect ratio data in create_stream_for_sink(). It will create a different VIC output and cause HDMI compliance test failed. [How] Preserve the original picture aspect ratio data during create the stream. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-15drm/amd/display: Fix possible NULL dereference on device remove/driver unloadSrinivasan Shanmugam1-1/+1
As part of a cleanup amdgpu_dm_fini() function, which is typically called when a device is being shut down or a driver is being unloaded The below error message suggests that there is a potential null pointer dereference issue with adev->dm.dc. In the below, line of code where adev->dm.dc is used without a preceding null check: for (i = 0; i < adev->dm.dc->caps.max_links; i++) { To fix this issue, add a null check for adev->dm.dc before this line. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943) Fixes: 006c26a0f1c8 ("drm/amd/display: Fix crash on device remove/driver unload") Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-13Merge tag 'amd-drm-next-6.9-2024-02-09' of ↵Dave Airlie6-75/+327
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.9-2024-02-09: amdgpu: - Validate DMABuf imports in compute VMs - Add RAS ACA framework - PSP 13 fixes - Misc code cleanups - Replay fixes - Atom interpretor PS, WS bounds checking - DML2 fixes - Audio fixes - DCN 3.5 Z state fixes - Remove deprecated ida_simple usage - UBSAN fixes - RAS fixes - Enable seq64 infrastructure - DC color block enablement - Documentation updates - DC documentation updates - DMCUB updates - S3 fixes - VCN 4.0.5 fixes - DP MST fixes - SR-IOV fixes amdkfd: - Validate DMABuf imports in compute VMs - SVM fixes - Trap handler updates radeon: - Atom interpretor PS, WS bounds checking - Misc code cleanups UAPI: - Bump KFD version so UMDs know that the fixes that enable the management of VA mappings in compute VMs using the GEM_VA ioctl for DMABufs exported from KFD are present - Add INFO query for input power. This matches the existing INFO query for average power. Used in gaming HUDs, etc. Example userspace: https://github.com/Umio-Yasuno/libdrm-amdgpu-sys-rs/tree/input_power From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240209221459.5453-1-alexander.deucher@amd.com
2024-02-13drm/amdgpu: respect the abmlevel module parameter value if it is setHamza Mahfooz1-6/+12
Currently, if the abmlevel module parameter is set, it is possible for user space to override the ABM level at some point after boot. However, that is undesirable because it means that we aren't respecting the user's wishes with regard to the level that they want to use. So, prevent user space from changing the ABM level if the module parameter is set to a non-auto value. Tested-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-13drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini()Nikita Zhandarovich1-9/+7
Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL before the call to dc_enable_dmub_notifications(), check beforehand to ensure there will not be a possible NULL-ptr-deref there. Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in 'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy(). Clean up by combining them all under one 'if'. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 81927e2808be ("drm/amd/display: Support for DMUB AUX") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-13drm/amdgpu: make damage clips support configurableHamza Mahfooz1-0/+7
We have observed that there are quite a number of PSR-SU panels on the market that are unable to keep up with what user space throws at them, resulting in hangs and random black screens. So, make damage clips support configurable and disable it by default for PSR-SU displays. Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-08drm/amd/display: Fix MST Null Ptr for RVFangzhi Zuo1-5/+7
The change try to fix below error specific to RV platform: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 ? _copy_to_user+0x25/0x30 ? drm_ioctl+0x296/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 drm_ioctl_kernel+0xcd/0x170 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 amdgpu_drm_ioctl+0x4e/0x90 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4dad17f76f Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c> RSP: 002b:00007ffd9ae859f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055e255a55900 RCX: 00007f4dad17f76f RDX: 00007ffd9ae85a90 RSI: 00000000c03864bc RDI: 000000000000000b RBP: 00007ffd9ae85a90 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c03864bc R13: 000000000000000b R14: 000055e255a7fc60 R15: 000055e255a01eb0 </TASK> Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device ccm cmac algif_hash algif_skcipher af_alg joydev mousedev bnep > typec libphy k10temp ipmi_msghandler roles i2c_scmi acpi_cpufreq mac_hid nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_mas> CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 With a second DP monitor connected, drm_atomic_state in dm atomic check sequence does not include the connector state for the old/existing/first DP monitor. In such case, dsc determination policy would hit a null ptr when it tries to iterate the old/existing stream that does not have a valid connector state attached to it. When that happens, dm atomic check should call drm_atomic_get_connector_state for a new connector state. Existing dm has already done that, except for RV due to it does not have official support of dsc where .num_dsc is not defined in dcn10 resource cap, that prevent from getting drm_atomic_get_connector_state called. So, skip dsc determination policy for ASICs that don't have DSC support. Cc: stable@vger.kernel.org # 6.1+ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2314 Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Fix MST Null Ptr for RVFangzhi Zuo1-5/+7
The change try to fix below error specific to RV platform: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 ? _copy_to_user+0x25/0x30 ? drm_ioctl+0x296/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 drm_ioctl_kernel+0xcd/0x170 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 amdgpu_drm_ioctl+0x4e/0x90 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4dad17f76f Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c> RSP: 002b:00007ffd9ae859f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055e255a55900 RCX: 00007f4dad17f76f RDX: 00007ffd9ae85a90 RSI: 00000000c03864bc RDI: 000000000000000b RBP: 00007ffd9ae85a90 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c03864bc R13: 000000000000000b R14: 000055e255a7fc60 R15: 000055e255a01eb0 </TASK> Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device ccm cmac algif_hash algif_skcipher af_alg joydev mousedev bnep > typec libphy k10temp ipmi_msghandler roles i2c_scmi acpi_cpufreq mac_hid nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_mas> CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 With a second DP monitor connected, drm_atomic_state in dm atomic check sequence does not include the connector state for the old/existing/first DP monitor. In such case, dsc determination policy would hit a null ptr when it tries to iterate the old/existing stream that does not have a valid connector state attached to it. When that happens, dm atomic check should call drm_atomic_get_connector_state for a new connector state. Existing dm has already done that, except for RV due to it does not have official support of dsc where .num_dsc is not defined in dcn10 resource cap, that prevent from getting drm_atomic_get_connector_state called. So, skip dsc determination policy for ASICs that don't have DSC support. Cc: stable@vger.kernel.org # 6.1+ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2314 Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: add panel_power_savings sysfs entry to eDP connectorsHamza Mahfooz1-0/+78
We want programs besides the compositor to be able to enable or disable panel power saving features. However, since they are currently only configurable through DRM properties, that isn't possible. So, to remedy that issue introduce a new "panel_power_savings" sysfs attribute. v2: squash in fix from Hamza (Alex) Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-01drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'Srinivasan Shanmugam1-0/+4
Add a NULL check for the kzalloc call that allocates memory for dummy_updates in the amdgpu_dm_atomic_commit_tail function. Previously, if kzalloc failed to allocate memory and returned NULL, the code would attempt to use the NULL pointer. The fix is to check if kzalloc returns NULL, and if so, log an error message and skip the rest of the current loop iteration with the continue statement. This prevents the code from attempting to use the NULL pointer. Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reported-by: Julia Lawall <julia.lawall@inria.fr> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202401300629.ICnCt983-lkp@intel.com/ Fixes: 135fd1b35690 ("drm/amd/display: Reduce stack size") Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-31drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'Srinivasan Shanmugam1-0/+4
Add a NULL check for the kzalloc call that allocates memory for dummy_updates in the amdgpu_dm_atomic_commit_tail function. Previously, if kzalloc failed to allocate memory and returned NULL, the code would attempt to use the NULL pointer. The fix is to check if kzalloc returns NULL, and if so, log an error message and skip the rest of the current loop iteration with the continue statement. This prevents the code from attempting to use the NULL pointer. Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reported-by: Julia Lawall <julia.lawall@inria.fr> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202401300629.ICnCt983-lkp@intel.com/ Fixes: 135fd1b35690 ("drm/amd/display: Reduce stack size") Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: add debugfs disallow edp psrHersen Wu4-2/+67
[Why] fix reading edp rx crc timeout failure. after bootup, kernel setup psr with dpcd 0x170 = 5. this notify rx psr enable and let rx fw start checking crc for fw internal logic. rx fw may not update crc read count within dpcd 0x246. read count is always 0. this will lead tx crc reading timeout. [How] add debugfs to let test app to disbable rx crc checking for rx internal logic. then test app can read rx crc dpcd 0x246 successfully. expected app sequence is as below: 1. disable eDP PHY and notify eDP rx with dpcd 0x600 = 2. 2. echo 0x1 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr 3. enable eDP PHY and notify eDP rx with dpcd 0x600 = 1 but without dpcd 0x170 = 5. 4. read crc from rx dpcd 0x270, 0x246, etc. 5. echo 0x0 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr. this will let eDP back to normal with psr setup dpcd 0x170 = 5. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-26drm/amd/display: "Enable IPS by default"Roman Li1-1/+2
[Why] IPS was temporary disabled due to instability. It was fixed in dmub firmware and with: - "drm/amd/display: Add IPS checks before dcn register access" - "drm/amd/display: Disable ips before dc interrupt setting" [How] Enable IPS by default. Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-26drm/amd/display: Disable ips before dc interrupt settingRoman Li1-1/+4
[Why] While in IPS2 an access to dcn registers is not allowed. If interrupt results in dc call, we should disable IPS. [How] Safeguard register access in IPS2 by disabling idle optimization before calling dc interrupt setting api. Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-26drm/amd/display: Add IPS checks before dcn register accessRoman Li1-10/+6
[Why] With IPS enabled a system hangs once PSR is active. PSR active triggers transition to IPS2 state. While in IPS2 an access to dcn registers results in hard hang. Existing check doesn't cover for PSR sequence. [How] Safeguard register access by disabling idle optimization in atomic commit and crtc scanout. It will be re-enabled on next vblank. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-26drm/amd/display: Allow IPS2 during ReplayNicholas Kazlauskas1-0/+2
[Why & How] Add regkey to block video playback in IPS2 by default Allow idle optimizations in the same spot we allow Replay for video playback usecases. Avoid sending it when there's an external display connected by modifying the allow idle checks to check for active non-eDP screens. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: "Enable IPS by default"Roman Li1-1/+2
[Why] IPS was temporary disabled due to instability. It was fixed in dmub firmware and with: - "drm/amd/display: Add IPS checks before dcn register access" - "drm/amd/display: Disable ips before dc interrupt setting" [How] Enable IPS by default. Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Disable ips before dc interrupt settingRoman Li1-1/+4
[Why] While in IPS2 an access to dcn registers is not allowed. If interrupt results in dc call, we should disable IPS. [How] Safeguard register access in IPS2 by disabling idle optimization before calling dc interrupt setting api. Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()'Srinivasan Shanmugam1-1/+1
Tell snprintf() to store at most 10 bytes in the output buffer instead of 30. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1508 dp_dsc_clock_en_read() error: snprintf() is printing too much 30 vs 10 Fixes: c06e09b76639 ("drm/amd/display: Add DSC parameters logging to debugfs") Cc: Alex Hung <alex.hung@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-23drm/amd/display: Address kdoc for eDP Panel Replay feature in ↵Srinivasan Shanmugam1-0/+8
'amdgpu_dm_crtc_set_panel_sr_feature()' Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_crtc.c:100: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * The DRM vblank counter enable/disable action is used as the trigger to enable Cc: Sun peng Li <sunpeng.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-23drm/amd/display: Add GART memory support for dmcubFudongwang1-1/+12
[Why] In dump file, GART memory can be accessed while frame buffer cannot. [How] Add GART memory support for dmcub. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Fudongwang <fudong.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-23drm/amd/display: Add IPS checks before dcn register accessRoman Li1-10/+6
[Why] With IPS enabled a system hangs once PSR is active. PSR active triggers transition to IPS2 state. While in IPS2 an access to dcn registers results in hard hang. Existing check doesn't cover for PSR sequence. [How] Safeguard register access by disabling idle optimization in atomic commit and crtc scanout. It will be re-enabled on next vblank. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-19Merge tag 'drm-next-2024-01-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds3-5/+10
Pull more drm fixes from Dave Airlie: "This is mostly amdgpu and xe fixes, with an amdkfd and nouveau fix thrown in. The amdgpu ones are just the usual couple of weeks of fixes. The xe ones are bunch of cleanups for the new xe driver, the fix you put in on the merge commit and the kconfig fix that was hiding the problem from me. amdgpu: - DSC fixes - DC resource pool fixes - OTG fix - DML2 fixes - Aux fix - GFX10 RLC firmware handling fix - Revert a broken workaround for SMU 13.0.2 - DC writeback fix - Enable gfxoff when ROCm apps are active on gfx11 with the proper FW version amdkfd: - Fix dma-buf exports using GEM handles nouveau: - fix a unneeded WARN_ON triggering xe: - Fix for definition of wakeref_t - Fix for an error code aliasing - Fix for VM_UNBIND_ALL in the case there are no bound VMAs - Fixes for a number of __iomem address space mismatches reported by sparse - Fixes for the assignment of exec_queue priority - A Fix for skip_guc_pc not taking effect - Workaround for a build problem on GCC 11 - A couple of fixes for error paths - Fix a Flat CCS compression metadata copy issue - Fix a misplace array bounds checking - Don't have display support depend on EXPERT (as discussed on IRC)" * tag 'drm-next-2024-01-19' of git://anongit.freedesktop.org/drm/drm: (71 commits) nouveau/vmm: don't set addr on the fail path to avoid warning drm/amdgpu: Enable GFXOFF for Compute on GFX11 drm/amd/display: Drop 'acrtc' and add 'new_crtc_state' NULL check for writeback requests. drm/amdgpu: revert "Adjust removal control flow for smu v13_0_2" drm/amdkfd: init drm_client with funcs hook drm/amd/display: Fix a switch statement in populate_dml_output_cfg_from_stream_state() drm/amdgpu: Fix the null pointer when load rlc firmware drm/amd/display: Align the returned error code with legacy DP drm/amd/display: Fix DML2 watermark calculation drm/amd/display: Clear OPTC mem select on disable drm/amd/display: Port DENTIST hang and TDR fixes to OTG disable W/A drm/amd/display: Add logging resource checks drm/amd/display: Init link enc resources in dc_state only if res_pool presents drm/amd/display: Fix late derefrence 'dsc' check in 'link_set_dsc_pps_packet()' drm/amd/display: Avoid enum conversion warning drm/amd/pm: Fix smuv13.0.6 current clock reporting drm/amd/pm: Add error log for smu v13.0.6 reset drm/amdkfd: Fix 'node' NULL check in 'svm_range_get_range_boundaries()' drm/amdgpu: drop exp hw support check for GC 9.4.3 drm/amdgpu: move debug options init prior to amdgpu device init ...
2024-01-19Merge tag 'i2c-for-6.8-rc1-rebased' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "This removes the currently unused CLASS_DDC support (controllers set the flag, but there is no client to use it). Also, CLASS_SPD support gets simplified to prepare removal in the future. Class based instantiation is not recommended these days anyhow. Furthermore, I2C core now creates a debugfs directory per I2C adapter. Current bus driver users were converted to use it. Finally, quite some driver updates. Standing out are patches for the wmt-driver which is refactored to support more variants. This is the rebased pull request where a large series for the designware driver was dropped" * tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) MAINTAINERS: use proper email for my I2C work i2c: stm32f7: add support for stm32mp25 soc i2c: stm32f7: perform I2C_ISR read once at beginning of event isr dt-bindings: i2c: document st,stm32mp25-i2c compatible i2c: stm32f7: simplify status messages in case of errors i2c: stm32f7: perform most of irq job in threaded handler i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq i2c: i801: Add lis3lv02d for Dell XPS 15 7590 i2c: i801: Add lis3lv02d for Dell Precision 3540 i2c: wmt: Reduce redundant: REG_CR setting i2c: wmt: Reduce redundant: function parameter i2c: wmt: Reduce redundant: clock mode setting i2c: wmt: Reduce redundant: wait event complete i2c: wmt: Reduce redundant: bus busy check i2c: mux: reg: Remove class-based device auto-detection support i2c: make i2c_bus_type const dt-bindings: at24: add ROHM BR24G04 eeprom: at24: use of_match_ptr() i2c: cpm: Remove linux,i2c-index conversion from be32 i2c: imx: Make SDA actually optional for bus recovering ...
2024-01-19drm/amd/display: Drop 'acrtc' and add 'new_crtc_state' NULL check for ↵Srinivasan Shanmugam1-3/+3
writeback requests. Return value of 'to_amdgpu_crtc' which is container_of(...) can't be null, so it's null check 'acrtc' is dropped. Fixing the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9302 amdgpu_dm_atomic_commit_tail() error: we previously assumed 'acrtc' could be null (see line 9299) Added 'new_crtc_state' NULL check for function 'drm_atomic_get_new_crtc_state' that retrieves the new state for a CRTC, while enabling writeback requests. Cc: stable@vger.kernel.org Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-19drm/amd/display: Align the returned error code with legacy DPWayne Lin1-0/+5
[Why] For usb4 connector, AUX transaction is handled by dmub utilizing a differnt code path comparing to legacy DP connector. If the usb4 DP connector is disconnected, AUX access will report EBUSY and cause igt@kms_dp_aux_dev fail. [How] Align the error code with the one reported by legacy DP as EIO. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-18drm/amd/display: Drop 'acrtc' and add 'new_crtc_state' NULL check for ↵Srinivasan Shanmugam1-3/+3
writeback requests. Return value of 'to_amdgpu_crtc' which is container_of(...) can't be null, so it's null check 'acrtc' is dropped. Fixing the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9302 amdgpu_dm_atomic_commit_tail() error: we previously assumed 'acrtc' could be null (see line 9299) Added 'new_crtc_state' NULL check for function 'drm_atomic_get_new_crtc_state' that retrieves the new state for a CRTC, while enabling writeback requests. Cc: stable@vger.kernel.org Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-18drm: remove I2C_CLASS_DDC supportHeiner Kallweit1-1/+0
After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC. Class-based device auto-detection is a legacy mechanism and shouldn't be used in new code. So we can remove this class completely now. Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-16drm/amd/display: Align the returned error code with legacy DPWayne Lin1-0/+5
[Why] For usb4 connector, AUX transaction is handled by dmub utilizing a differnt code path comparing to legacy DP connector. If the usb4 DP connector is disconnected, AUX access will report EBUSY and cause igt@kms_dp_aux_dev fail. [How] Align the error code with the one reported by legacy DP as EIO. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-16drm/amd/display: Enable Panel Replay for static screen use caseTom Chung4-68/+156
[Why] Enable the Panel Replay if eDP panel and ASIC support. (prioritize Panel Replay over PSR) [How] - Setup the Panel Replay config during the device init (prioritize Panel Replay over PSR). - Separate the Replay init function into two functions amdgpu_dm_link_setup_replay() and amdgpu_dm_set_replay_caps() to fix the issue in the earlier commit that cause PSR and Replay enabled at the same time. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-16drm/amd/display: Allow IPS2 during ReplayNicholas Kazlauskas1-0/+2
[Why & How] Add regkey to block video playback in IPS2 by default Allow idle optimizations in the same spot we allow Replay for video playback usecases. Avoid sending it when there's an external display connected by modifying the allow idle checks to check for active non-eDP screens. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-09drm/amd/display: cleanup inconsistent indenting in amdgpu_dm_colorMelissa Wen1-1/+1
smatch warnings: amdgpu_dm_update_plane_color_mgmt() warn: inconsistent indenting Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401051643.PPdbmG1U-lkp@intel.com/ Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-09Revert "drm/amd/display: fix bandwidth validation failure on DCN 2.1"Ivan Lipski1-1/+1
This commit causes dmesg-warn on several IGT tests on DCN 3.1.6: *ERROR* link_enc_cfg_validate: Invalid link encoder assignments - 0x1c Affected IGT tests include: - amdgpu/[amd_assr|amd_plane|amd_hotplug] - kms_atomic - kms_color - kms_flip - kms_properties - kms_universal_plane and some other tests This reverts commit 3a0fa3bc245ef92838a8296e0055569b8dff94c4. Cc: Melissa Wen <mwen@igalia.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Ivan Lipski <ivlipski@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-06drm/amd/display: fix bandwidth validation failure on DCN 2.1Melissa Wen1-1/+1
IGT `amdgpu/amd_color/crtc-lut-accuracy` fails right at the beginning of the test execution, during atomic check, because DC rejects the bandwidth state for a fb sizing 64x64. The test was previously working with the deprecated dc_commit_state(). Now using dc_validate_with_context() approach, the atomic check needs to perform a full state validation. Therefore, set fast_validation to false in the dc_validate_global_state call for atomic check. Cc: stable@vger.kernel.org Fixes: b8272241ff9d ("drm/amd/display: Drop dc_commit_state in favor of dc_commit_streams") Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-06drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as wellAlex Deucher1-2/+6
These chips needs the same fix. This was previously not seen on then since the AGP aperture expanded the system aperture, but this showed up again when AGP was disabled. Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-06drm/amd/display: Move fixpt_from_s3132 to amdgpu_dmHarry Wentland1-3/+15
Other environments don't like the unary minus operator on an unsigned value. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-06drm/amd/display: Fix recent checkpatch errors in amdgpu_dmHarry Wentland3-6/+5
- Use tabs, not spaces. - Brace and parentheses placement Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-06drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP displays ↵Joshua Ashton1-3/+5
without PSR The check for sending the vsc infopacket to the display was gated behind PSR (Panel Self Refresh) being enabled. The vsc infopacket also contains the colorimetry (specifically the container color gamut) information for the stream on modern DP. PSR is typically only supported on mobile phone eDP displays, thus this was not getting sent for typical desktop monitors or TV screens. This functionality is needed for proper HDR10 functionality on DP as it wants BT2020 RGB/YCbCr for the container color space. Cc: stable@vger.kernel.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Xaver Hugl <xaver.hugl@gmail.com> Cc: Melissa Wen <mwen@igalia.com> Fixes: 15f9dfd545a1 ("drm/amd/display: Register Colorspace property for DP and HDMI") Tested-by: Simon Berz <simon@berz.me> Tested-by: Xaver Hugl <xaver.hugl@kde.org> Signed-off-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-03Re-revert "drm/amd/display: Enable Replay for static screen use cases"Ivan Lipski2-30/+1
This reverts commit 44e60b14d5a72f91fd0bdeae8da59ae37a3ca8e5. Since, it causes a regression in which eDP displays with PSR support, but no Replay support (Sink support <= 0x03), fail to enable PSR and consequently all IGT amd_psr tests fail. So, revert this until a more suitable fix can be found. This got brought back accidently with the backmerge. Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivlipski@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-03drm/amd/display: pbn_div need be updated for hotplug eventWayne Lin1-2/+1
link_rate sometime will be changed when DP MST connector hotplug, so pbn_div also need be updated; otherwise, it will mismatch with link_rate, causes no output in external monitor. Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Wade Wang <wade.wang@hp.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-03drm/amd/display: Disable IPS by defaultRoman Li1-0/+2
[Why] Instability is observed on DCN35 if idle power optimization is enabled. [How] Disable IPS until issue is resolved. Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Refactor phantom resource allocationDillon Varone1-7/+2
[WHY?] Phantom streams and planes were previously not referenced explcitly on creation. [HOW?] To reduce memory management complexity, add an additional phantom streams and planes reference into dc_state, and move mall_stream_config to stream_status inside the state to make it safe to modify in shallow copies. Also consildates any logic that is affected by this change to dc_state. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Refactor dc_state interfaceDillon Varone1-22/+23
[WHY?] Part of the dc_state interface that deals with adding streams and planes should remain public, while others that deal with internal status' and subvp should be private to DC. [HOW?] Move and rename the public functions to dc_state.h and private functions to dc_state_priv.h. Also add some additional functions for extracting subvp meta data from the state. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: Wake DMCUB before executing GPINT commandsNicholas Kazlauskas1-24/+5
[Why] DMCUB can be in idle when we attempt to interface with the HW through the GPINT mailbox resulting in a system hang. [How] Add dc_wake_and_execute_gpint() to wrap the wake, execute, sleep sequence. If the GPINT executes successfully then DMCUB will be put back into sleep after the optional response is returned. It functions similar to the inbox command interface. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-26 13:53:26 +0300