summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2013-04-03gpio: Renesas R-Car GPIO driver V3Magnus Damm3-0/+380
This patch is V3 of a GPIO driver for the R-Car series of SoCs from Renesas. This driver is designed to be reusable between multiple SoCs that share the same basic building block, but so far it has only been used on R-Car H1 (r8a7779). Each driver instance handles 32 GPIOs with individually maskable IRQs. The driver operates on a single I/O memory range and the 32 GPIOs are hooked up a single interrupt. In the case of R-Car H1 either external IRQ pins or GPIOs with interrupts can be used for on-board interupts. For external IRQs 4 pins are supported, and in the case of GPIO there are 202 GPIOS as 202 interrupts hooked up via 6 driver instances and to the GIC and the Cortex-A9 Quad. At this point this driver is interfacing as a regular platform device driver. In the future DT support will be submitted as an incremental feature patch. Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02Merge branch 'soc' into pinmux-baseSimon Horman2-63/+84
Conflicts: drivers/pinctrl/sh-pfc/pfc-r8a7740.c This merge is to provide r8a73a4 SoC files, which are added in the soc branch and depended on by r8a73a4 pfc-changes which are to be added to the pinmux branch.
2013-03-28gpio: pl061: Add pl061_gpio_free()Axel Lin1-0/+8
commit 39b70ee051 "gpio: pl061: bind pinctrl by gpio request" adds pl061_gpio_request() to request pinctrl. Thus we need to add corresponding pl061_gpio_free() to free the pin. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: samsung: Add terminating entry for exynos_pinctrl_idsAxel Lin1-0/+1
The of_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: mvebu: add dbg_show functionSimon Guinot1-0/+59
This patch adds a dedicated dbg_show function to the gpio-mvebu driver. In addition to the generic gpiolib informations, this function displays informations related with the specific Marvell registers (blink enable, data in polarity, interrupt masks and cause). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27MAX7301 GPIO: Do not force SPI speed when using OF PlatformChristophe Leroy1-1/+2
The bit_per_word can be set in the OF Device tree, so no need to force it as with the platform_data when using OF Platform Signed-off-by: Patrick Vasseur <patrick.vasseur@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: gpio-tps65910.c: fix checkpatch errorLaurent Navet1-1/+1
Fix : gpio/gpio-tps65910.c:136: ERROR: space required before the open parenthesis '(' Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: gpio-timberdale.c: fix checkpatch errorLaurent Navet1-2/+1
Fix : gpio/gpio-timberdale.c:171: ERROR: else should follow close brace '}' Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: gpio-tc3589x.c: fix checkpatch errorsLaurent Navet1-4/+4
Fix : gpio/gpio-tc3589x.c:285: ERROR: code indent should use tabs where possible gpio/gpio-tc3589x.c:286: ERROR: code indent should use tabs where possible gpio/gpio-tc3589x.c:287: ERROR: code indent should use tabs where possible gpio/gpio-tc3589x.c:347: ERROR: code indent should use tabs where possible Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: gpio-stp-xway.c: fix checkpatch errorLaurent Navet1-1/+1
Fix : gpio/gpio-stp-xway.c:220: ERROR: trailing whitespace Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: gpio-sch.c: fix checkpatch errorLaurent Navet1-39/+35
Fix : gpio/gpio-sch.c:206: ERROR: switch and case should be at the same indent Also remove blank lines Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: gpio-pxa.c: fix checkpatch errorsLaurent Navet1-2/+2
Fix : gpio/gpio-pxa.c:605: ERROR: space required after that ',' (ctx:VxV) gpio/gpio-pxa.c:672: ERROR: space prohibited after that open parenthesis '(' Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: gpio-pca953x.c: fix checkpatch errorLaurent Navet1-2/+1
Fix : gpio/gpio-pca953x.c:150: ERROR: else should follow close brace '}' Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: gpio-omap.c: fix checkpatch errorLaurent Navet1-1/+1
Fix : gpio/gpio-omap.c:697: ERROR: space required before the open parenthesis '(' Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: gpio-mvebu.c: fix checkpatch errorsLaurent Navet1-13/+13
Fix : gpio/gpio-mvebu.c:120: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:136: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:154: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:404: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:476: ERROR: "(foo*)" should be "(foo *)" gpio/gpio-mvebu.c:480: ERROR: "(foo*)" should be "(foo *)" gpio/gpio-mvebu.c:484: ERROR: "(foo*)" should be "(foo *)" gpio/gpio-mvebu.c:512: ERROR: space prohibited after that '!' (ctx:BxW) gpio/gpio-mvebu.c:518: ERROR: space prohibited after that '!' (ctx:BxW) gpio/gpio-mvebu.c:518: ERROR: space required before the open brace '{' gpio/gpio-mvebu.c:563: ERROR: space prohibited after that '!' (ctx:BxW) gpio/gpio-mvebu.c:570: ERROR: trailing whitespace gpio/gpio-mvebu.c:577: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:635: ERROR: space prohibited after that '!' (ctx:BxW) Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: gpiolib-of.c: fix checkpatch errorLaurent Navet1-1/+1
Fix : gpio/gpiolib-of.c:64: ERROR: code indent should use tabs where possible Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: mc33880: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han1-4/+4
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: 74x164: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han1-4/+4
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: mc33880: use dev_err() instead of printk()Jingoo Han1-1/+2
dev_err() is more preferred than printk(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: pcf857x: use devm_kzalloc()Jingoo Han1-5/+2
Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: mc33880: use devm_kzalloc()Jingoo Han1-5/+3
Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: max732x: use devm_kzalloc()Jingoo Han1-3/+2
Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: max7301: use devm_kzalloc()Jingoo Han1-3/+1
Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: max7300: use devm_kzalloc()Jingoo Han1-3/+1
Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: adp5520: use devm_kzalloc()Jingoo Han1-3/+1
Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio/vt8500: Convert to devm_ioremap_resource()Sachin Kamat1-5/+3
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: em: Make use of devm functionsMagnus Damm1-34/+19
Update the Emma Mobile GPIO driver to make use of devm functions. This simplifies the error handling and makes the code more compact. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio-lynxpoint: Add X86 dependency and io-port handling header.Mathias Nyman2-1/+2
Lynxpoint gpio driver uses X86 specific io-ports to control gpios Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio/gpio-ich: make ichx_gpio_check_available() return a pure boolean valueMika Westerberg1-1/+1
It is more readable for humans to use double-bang (!!) to convert the value to pure boolean before it is returned. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio-sch: Allow for more than 8 lines in the resume wellDarren Hart1-10/+27
The E6xx (TunnelCreek) CPUs have 9 GPIO lines in the resume well. Update the resume functions to allow for more than 8 GPIO lines, using the core functions as a template. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27Add TI TCA9554 to supported devices tableNikolay Balandin1-0/+1
Signed-off-by: Nikolay Balandin <nbalandin@dev.rtsoft.ru> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: stmpe: pass DT node to irqdomainGabriel Fernandez1-4/+11
The irq domain was implemented but the device tree node was not transmitted to irq_domain_add_simple(). Cc: stable@vger.kernel.org Signed-off-by: Gabriel Fernandez <gabriel.fernandez@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: viperboard: Remove duplicate code to set gpio->gpiob_valAxel Lin1-4/+0
Set it once is enough, and it's done in vprbrd_gpiob_set() which is called by vprbrd_gpiob_direction_output(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Lars Poeschel <poeschel@lemonage.de> Acked-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio-ich: Check for pin availability at request timeJean Delvare1-12/+3
Stop checking for pin availability in direction and get functions. These functions can be called repeatedly, so checking every time is bad for performance. Now that requesting GPIO pins is no longer optional, checking for availability at pin request time is enough. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio-ich: Fix value returned by ichx_gpio_requestJean Delvare1-1/+1
Per Documentation/gpio.txt, gpio_request callbacks should return 0 on success or a negative value on error. So it is not clear what was meant by letting ichx_gpio_request return 1 in some cases, nor how a caller would interpret it. Align the code with the comment above it and consider pins as available by default. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-26arm: Move chained_irq_(enter|exit) to a generic fileCatalin Marinas6-10/+6
These functions have been introduced by commit 10a8c383 (irq: introduce entry and exit functions for chained handlers) in asm/mach/irq.h. This patch moves them to linux/irqchip/chained_irq.h so that generic irqchip drivers do not rely on architecture specific header files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2013-03-24Merge tag 'pinctrl-fixes-for-v3.9' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "Here are a few pinctrl fixes for the v3.9 rc series: - Usecount bounds checking so we do not go below zero on mux usecounts. - Loop range checking in GPIO ranges in the DT range parser. - Proper print in debugfs for pinconf state. - Fix compilation bug in generic pinconf code. - Minor bugfixes to abx500 and mvebu drivers." * tag 'pinctrl-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinmux: forbid mux_usecount to be set at UINT_MAX pinctrl: mvebu: fix checking for SoC specific controls pinctrl: generic: Fix compilation error pinctrl: Print the correct information in debugfs pinconf-state file pinctrl: abx500: Fix checking if pin use AlternateFunction register gpio: fix wrong checking condition for gpio range
2013-03-18Merge branches 'soc' and 'pinmux' into boards-baseSimon Horman2-55/+82
2013-03-16Merge branch 'next/pinctrl-exynos' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim <kgene.kim@samsung.com>: Here is support pinctrl-exynos5250 and that already got ack from Linus Walleij. * 'next/pinctrl-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: skip wakeup interrupt registration for exynos5250 if pinctrl is enabled gpio: samsung: skip gpiolib registration if pinctrl support is enabled for exynos5250 pinctrl: exynos: add exynos5250 SoC specific data Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-16Merge branch 'next/irq-s3c24xx' of ↵Arnd Bergmann1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim <kgene.kim@samsung.com>: Here is finish the irq rework for s3c2412, s3c2440 and s3c2442 into the new structure and eint0 to 3 on the s3c2412. * 'next/irq-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: gpio: samsung: fixes build warning with s3c2410_defconfig ARM: S3C24XX: handle s3c2412 eints using new infrastructure ARM: S3C24XX: add soc_is_s3c2412 option ARM: S3C24XX: include first 4 bits of the eint register in irq mapping ARM: S3C24XX: transform s3c2412 irqs into new structure ARM: S3C24XX: modify s3c2412 irq init to initialize all irqs ARM: S3C24XX: move s3c2412 irq init to common code ARM: S3C24XX: use samsung_sync_wakemask in s3c2412 pm ARM: S3C24XX: transform s3c2440 irqs into new structure ARM: S3C24XX: transform s3c2442 irqs into new structure ARM: S3C24XX: integrate s3c2440 irqs into common init ARM: S3C24XX: move s3c2440 irqs to common irq code ARM: S3C24XX: create dedicated irq init functions for s3c2440 and s3c2442 ARM: S3C24XX: move s3c244x irq init to common irq code Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-15Merge branch 'fixes' of ↵Simon Horman1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into pinmux-base
2013-03-12Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+7
Pull ARM SoC fixes from Arnd Bergmann: "These bug fixes are for the largest part for mvebu/kirkwood, which saw a few regressions after the clock infrastructure was enabled, and for OMAP, which showed a few more preexisting bugs with the new multiplatform support. Other small fixes are for imx, mxs, tegra, spear and socfpga" * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: spear3xx: Use correct pl080 header file Arm: socfpga: pl330: Add #dma-cells for generic dma binding support ARM: multiplatform: Sort the max gpio numbers. ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART" ARM: imx: pll1_sys should be an initial on clk arm: mach-orion5x: fix typo in compatible string of a .dts file arm: mvebu: fix address-cells in mpic DT node arm: plat-orion: fix address decoding when > 4GB is used arm: mvebu: Reduce reg-io-width with UARTs ARM: Dove: add RTC device node arm: mvebu: enable the USB ports on Armada 370 Reference Design board ARM: dove: drop "select COMMON_CLK_DOVE" rtc: rtc-mv: Add support for clk to avoid lockups gpio: mvebu: Add clk support to prevent lockup ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency ARM: mxs: cfa10049: Fix fb initialisation function ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: OMAP: RX-51: add missing USB phy binding clk: Tegra: Remove duplicate smp_twd clock ...
2013-03-09gpio: mvebu: Add clk support to prevent lockupAndrew Lunn1-0/+7
The kirkwood SoC GPIO cores use the runit clock. Add code to clk_prepare_enable() runit, otherwise there is a danger of locking up the SoC by accessing the GPIO registers when runit clock is not ticking. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-07gpio: pl061: bind pinctrl by gpio requestHaojian Zhuang1-0/+13
Add the pl061_gpio_request() to request pinctrl. Create the logic between pl061 gpio driver and pinctrl (pinctrl-single) driver. While a gpio pin is requested, it will request pinctrl driver to set that pin with gpio function mode. So pinctrl driver should append .gpio_request_enable() in pinmux_ops. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-07gpio: pl061: support irqdomainHaojian Zhuang1-39/+65
Drop the support of irq generic chip. Now support irqdomain instead. Although set_wake() is defined in irq generic chip & it is not really used in pl061 gpio driver. Drop it at the same time. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-07gpio: add gpio offset in gpio range cells propertyHaojian Zhuang1-13/+2
Add gpio offset into "gpio-range-cells" property. It's used to support sparse pinctrl range in gpio chip. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-07gpio: fix wrong checking condition for gpio rangeHaojian Zhuang1-3/+2
If index++ calculates from 0, the checking condition of "while (index++)" fails & it doesn't check any more. It doesn't follow the loop that used at here. Replace it by endless loop at here. Then it keeps parsing "gpio-ranges" property until it ends. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-06gpio/em: Add Device Tree supportMagnus Damm1-3/+42
Update the Emma Mobile GPIO driver to add DT support. The patch simply adds a two-cell xlate function and updates the probe code to allow configuration via DT using the "ngpios" property plus OF id in the same style as gpio-mvebu.c. The code is also adjusted to use postcore_initcall() to force early setup. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-03-06gpio/omap: warn if bank is not enabled on setting irq typeJon Hunter1-0/+3
For OMAP devices, if a gpio is being used as an interrupt source but has not been requested by calling gpio_request(), a call to request_irq() may cause the kernel hang because the gpio bank may be disabled and hence the register access will fail. To prevent such hangs, test for this case and warn if this is detected. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-03-06gpio/omap: convert gpio irq domain to linear mappingJon Hunter1-41/+31
Currently the OMAP GPIO driver uses a legacy mapping for the GPIO IRQ domain. This is not necessary because we do not need to assign a specific interrupt number to the GPIO IRQ domain. Therefore, convert the OMAP GPIO driver to use a linear mapping instead. Please note that this also allows to simplify the logic in the OMAP gpio_irq_handler() routine, by using irq_find_mapping() to obtain the virtual irq number from the GPIO bank and bank index. Reported-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 07:48:17 +0300