summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-pca953x.c
AgeCommit message (Collapse)AuthorFilesLines
2014-08-28gpio: pca953x: Drop deprecated DT bindingsMarkus Pargmann1-51/+3
Drop deprecated DT bindings and use automaticly assigned gpio and irq bases. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-22gpio: remove all usage of gpio_remove retval in driver/gpioabdoulaye berthe1-6/+1
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-28gpio: pca953x: use gpiolib irqchip helpersLinus Walleij1-61/+32
This switches the PCA953x driver over to using the gpiolib irqchip helpers to handle the threaded interrups cascaded off this GPIO chip. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: pca953x: request a shared interruptToby Smith1-1/+2
Request a shared interrupt when requesting a pca953x GPIO interrupt Signed-off-by: Toby Smith <toby@tismith.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: pca953x: return IRQ_NONE when appropriateToby Smith1-2/+4
The irq handler should return IRQ_NONE or IRQ_HANDLED to report if we have handled the interrupt. Signed-off-by: Toby Smith <toby@tismith.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-13gpio: pca953x: Fix gpio_base may not default to -1Aaron Sierra1-1/+2
If no device tree node existed for a device when CONFIG_OF_GPIO was defined, then gpio_base would not default to -1. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-13gpio: pca953x: Add Exar XRA1202Aaron Sierra1-0/+3
Add Exar XRA1202 8-bit GPIO expander to supported list. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Graeme Smecher <gsmecher@threespeedlogic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-13gpio: pca953x: Add NXP PCA9698Aaron Sierra1-0/+2
Add the NXP PCA9698 40-bit GPIO expander to the supported list. Note: This only enables GPIO functionality. Tested-by: Bob Schmitz <bschmitz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Graeme Smecher <gsmecher@threespeedlogic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-13gpio: pca953x: Add devices to Kconfig helpAaron Sierra1-1/+1
The pca953x driver supports tca6424 (24-bit) and pca9505 (40-bit) devices. They were the only supported devices not mentioned in the Kconfig help. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Graeme Smecher <gsmecher@threespeedlogic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-04gpio/pinctrl: make gpio_chip members typed booleanLinus Walleij1-1/+1
This switches the two members of struct gpio_chip that were defined as unsigned foo:1 to bool, because that is indeed what they are. Switch all users in the gpio and pinctrl subsystems to assign these values with true/false instead of 0/1. The users outside these subsystems will survive since true/false is 1/0, atleast we set some kind of more strict typing example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-23gpio: pca953x: Don't flip bits on PCA957x GPIO expanders when probing them.Graeme Smecher1-11/+0
The pca957x driver supports a handful of I2C GPIO expanders from NXP, Maxim, and TI. For the PCA9574 and PCA9575 devices only, the driver resets the GPIO level and direction in the pca957x_probe function. This seems like the wrong thing to do, since it can cause hardware bit twiddles during warm reboots when the chip state and reset values don't match. This kind of initialization is best left upstream (in a bootloader) or downstream (in userspace). It's also an inconsistency across devices supported by this driver. This patch is NOT boot-tested: the SoC I'm using is stuck on 2.6.37, and the patch doesn't apply trivially. Signed-off-by: Graeme Smecher <gsmecher@threespeedlogic.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-07Merge tag 'gpio-v3.12-1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v3.12 series: - A new driver for the TZ1090 PDC which is used on the metag architecture. - A new driver for the Kontron ETX or COMexpress GPIO block. This is found on some ETX x86 devices. - A new driver for the Fintek Super-I/O chips, used on some x86 boards. - Added device tree probing on a few select GPIO blocks. - Drop the Exynos support from the Samsung GPIO driver. The Samsung maintainers have moved over to use the modernized pin control driver to provide GPIO for the modern platforms instead. - The usual bunch of non-critical fixes and cleanups" * tag 'gpio-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (36 commits) gpio: return -ENOTSUPP if debounce cannot be set gpio: improve error path in gpiolib gpio: add GPIO support for F71882FG and F71889F of: add vendor prefix for Microchip Technology Inc gpio: mcp23s08: rename the device tree property gpio: samsung: Drop support for Exynos SoCs gpio: pcf857x: Remove pdata argument to pcf857x_irq_domain_init() gpio: pcf857x: Sort headers alphabetically gpio: max7301: Reverting "Do not force SPI speed when using OF Platform" gpio: Fix bit masking in Kontron PLD GPIO driver gpio: pca953x: fix gpio input on gpio offsets >= 8 drivers/gpio: simplify use of devm_ioremap_resource drivers/gpio/gpio-omap.c: convert comma to semicolon gpio-lynxpoint: Fix warning about unbalanced pm_runtime_enable gpio: Fix platform driver name in Kontron PLD GPIO driver gpio: adnp: Fix segfault if request_threaded_irq fails gpio: msm: Staticize local variable 'msm_gpio' gpio: gpiolib-of.c: make error message more meaningful by adding the node name and index gpio: use dev_get_platdata() gpio/mxc: add chained_irq_enter/exit() to mx2_gpio_irq_handler ...
2013-08-29gpio: (gpio-pca953x) move header to linux/platform_data/Vivien Didelot1-1/+1
This patch moves the pca953x.h header from include/linux/i2c to include/linux/platform_data and updates existing support accordingly. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-16gpio: pca953x: fix gpio input on gpio offsets >= 8Andrew Ruder1-1/+1
This change fixes a regression introduced by commit f5f0b7aa8 (gpio: pca953x: make the register access by GPIO bank) When the pca953x driver was converted to using 8-bit reads/writes the bitmask in pca953x_gpio_get_value wasn't adjusted with a modulus BANK_SZ and consequently looks at the wrong bits in the input register. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio: use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-07Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-2/+1
Pull GPIO changes from Grant Likely: "The usual selection of bug fixes and driver updates for GPIO. Nothing really stands out except the addition of the GRGPIO driver and some enhacements to ACPI support" I'm pulling this despite the earlier mess. Let's hope it compiles these days. * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (46 commits) gpio: grgpio: Add irq support gpio: grgpio: Add device driver for GRGPIO cores gpiolib-acpi: introduce acpi_get_gpio_by_index() helper GPIO: gpio-generic: remove kfree() from bgpio_remove call gpio / ACPI: Handle ACPI events in accordance with the spec gpio: lpc32xx: Fix off-by-one valid range checking for bank gpio: mcp23s08: convert driver to DT gpio/omap: force restore if context loss is not detectable gpio/omap: optimise interrupt service routine gpio/omap: remove extra context restores in *_runtime_resume() gpio/omap: free irq domain in probe() failure paths gpio: gpio-generic: Add 16 and 32 bit big endian byte order support gpio: samsung: Add terminating entry for exynos_pinctrl_ids gpio: mvebu: add dbg_show function MAX7301 GPIO: Do not force SPI speed when using OF Platform gpio: gpio-tps65910.c: fix checkpatch error gpio: gpio-timberdale.c: fix checkpatch error gpio: gpio-tc3589x.c: fix checkpatch errors gpio: gpio-stp-xway.c: fix checkpatch error gpio: gpio-sch.c: fix checkpatch error ...
2013-04-11gpio: pca953x: fix irq_domain_add_simple usageAlexandre Belloni1-1/+1
We actually have to pass chip as the host_data parameter of irq_domain_add_simple() as later on, it is used to initialize chip_data in pca953x_gpio_irq_map(). Failing to do so is leading to a NULL pointer dereference after calling irq_data_get_irq_chip_data() in pca953x_irq_mask(), pca953x_irq_unmask(), pca953x_irq_bus_lock(), pca953x_irq_bus_sync_unlock() and pca953x_irq_set_type(). Fixes regression introduced by commit 0e8f2fdacf1d44651aa7e57063c76142d1f4988b (gpio: pca953x: use simple irqdomain) Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: gpio-pca953x.c: fix checkpatch errorLaurent Navet1-2/+1
Fix : gpio/gpio-pca953x.c:150: ERROR: else should follow close brace '}' Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-28gpio: pca953x: use managed resourcesLinus Walleij1-24/+8
Using the devm_* managed resources the pca driver can be simplified and cut down on boilerplate code. [gcl: fixed a inccorect reference to a removed label, "goto fail_out" became "return ret"] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-28gpio: pca953x: use simple irqdomainGregory CLEMENT1-37/+28
This switches the legacy irqdomain to the simple one, which will auto-allocate descriptors, and also make sure that we use irq_create_mapping() in the to_irq function. Also use the map function of irq_domain_ops to setup the irq configuration on demand and no more statically during the initialization of the driver. Based on a initial patch from Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-25gpio: pca953x: add support for pca9505Gregory CLEMENT1-0/+2
Now that pca953x driver can handle GPIO expanders with more than 32 bits this patch adds the support for the pca9505 which cam with 40 GPIOs. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-25gpio: pca953x: make the register access by GPIO bankGregory CLEMENT1-106/+175
Until now the pca953x driver accessed all the bank of a given register in a single command using only a 32 bits variable. New expanders from the pca53x family come with 40 GPIOs which no more fit in a 32 variable. This patch make access to the registers more generic by relying on an array of u8 variables. This fits exactly the way the registers are represented in the hardware. It also adds helpers to access to a single register of a bank instead of reading or writing all the banks for a given register. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-12Merge tag 'driver-core-3.8-rc1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here's the large driver core updates for 3.8-rc1. The biggest thing here is the various __dev* marking removals. This is going to be a pain for the merge with different subsystem trees, I know, but all of the patches included here have been ACKed by their various subsystem maintainers, as they wanted them to go through here. If this is too much of a pain, I can pull all of them out of this tree and just send you one with the other fixes/updates and then, after 3.8-rc1 is out, do the rest of the removals to ensure we catch them all, it's up to you. The merges should all be trivial, and Stephen has been doing them all in linux-next for a few weeks now quite easily. Other than the __dev* marking removals, there's nothing major here, some firmware loading updates and other minor things in the driver core. All of these have (much to Stephen's annoyance), been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio update. * tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits) modpost.c: Stop checking __dev* section mismatches init.h: Remove __dev* sections from the kernel acpi: remove use of __devinit PCI: Remove __dev* markings PCI: Always build setup-bus when PCI is enabled PCI: Move pci_uevent into pci-driver.c PCI: Remove CONFIG_HOTPLUG ifdefs unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs sh/PCI: Remove CONFIG_HOTPLUG ifdefs powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs mips/PCI: Remove CONFIG_HOTPLUG ifdefs microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs dma: remove use of __devinit dma: remove use of __devexit_p firewire: remove use of __devinitdata firewire: remove use of __devinit leds: remove use of __devexit leds: remove use of __devinit leds: remove use of __devexit_p mmc: remove use of __devexit ...
2012-11-28gpio: remove use of __devinitBill Pemberton1-3/+3
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-18gpio: pca953x: Add compatible strings to gpio-pca953x driverMaxime Ripard1-0/+29
Even though the device tree binding code was already written, the compatible strings were not yet in the driver. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-18gpio: pca953x: Register an IRQ domainMaxime Ripard1-6/+20
The PCA953x used to register no IRQ domain, which made it impossible to use it as an interrupt-parent from the device tree. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17gpio/pca953x: increase variables size to support 24 bit of dataLeed Aguilar1-14/+14
Increase variable size from u16 to u32 to allocate 24 bit of data required for the TCA6424 I/O expander device type. Signed-off-by: Leed Aguilar <leed.aguilar@ti.com> Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17GPIO: PCA953X: Increase size of invert variable to support 24 bitChandrabhanu Mahapatra1-5/+6
TCA6424 is a low voltage 24 bit I2C and SMBus I/O expander of pca953x family similar to its 16 bit predecessor TCA6416. It comes with three 8-bit active Input, Output, Polarity Inversion and Configuration registers each. The polarity of Input ports can be reversed by setting the appropiate bit in Polarity Inversion registers. The variables corresponding to Input, Output and Configuration registers have already been updated to support 24 bit values. This patch thus updates the invert variable of PCA953X platform data to support 24 bit. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-26gpio/tca6424: merge I2C transactions, remove castAndreas Schallenberg1-12/+16
This is a follow-up to ae79c1904 "[PATCH v2] Add support for TCA6424" merged in the v3.5 merge window. It fixes comments made when the patch was merged. - Use 3 byte transfers instead of two separate transfers (2+1 byte) - An unnecessary cast removed Signed-off-by: Andreas Schallenberg <Andreas.Schallenberg@3alitytechnica.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19Add support for TCA6424AAndreas Schallenberg1-13/+30
This patch extends the PCA953x driver to support TI's TCA6424A 24 bit I2C I/O expander. The patch is based on code by Michele Bevilacqua. Changes in v2: - Compare ngpio against 24 in both places, not >16 - Larger datatype now u32 instead of uint. Bit fields not used for struct members since their address is taken. - Be precise: TCA6424A (untested for older TCA6424) Signed-off-by: Andreas Schallenberg<Andreas.Schallenberg@3alitytechnica.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-11-21gpio: pca953x: Staticise pca953x_get_altdata()Mark Brown1-2/+2
It's not used outside of the driver so doesn't need to be exported, and sparse notices this and complains about it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-15Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-7/+4
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio: pca953x: propagate the errno from the chip_init functions gpio: pca953x: remove unneeded check for chip type gpio/omap: check return value from irq_alloc_generic_chip gpio/omap: replace MOD_REG_BIT macro with static inline
2011-10-29gpio: pca953x: propagate the errno from the chip_init functionsWolfram Sang1-6/+5
Initializing the chips may return with an error, but this error gets dropped in probe(). Propagate this further to the driver core. Also, simplify returning the error in one of the init functions. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29gpio: pca953x: remove unneeded check for chip typeWolfram Sang1-3/+1
We can assume our own device_id table is correct, so remove checking if the chip type is valid. (The check was bogus anyway: If it found an invalid entry, it returned with 0!) This is in preparation for further cleanups. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-13gpio-pca953x: fix gpio_baseHartmut Knaack1-0/+1
gpio_base was set to 0 if no system platform data or open firmware platform data was provided. This led to conflicts, if any other gpiochip with a gpiobase of 0 was instantiated already. Setting it to -1 will automatically use the first one available. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-16gpio/pca953x: Deprecate meaningless device-tree bindingsDavid Jander1-2/+9
The property 'polarity' is handled by the GPIO core, and the 'gpio-base' should be assigned automatically. It is meaningless in the device-tree, since GPIO's are identified by the "chip-name"/offset pair. This way, the whole pca953x_get_alt_pdata() can hopefully soon go away. We still need to check whether we really want GPIO-interrupt functionality by simply looking if the I2C node has an interrupts property defined, since this property is not used for anything else. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-16gpio/pca953x: Remove dynamic platform data pointerDavid Jander1-49/+28
In the case that we obtain device-tree data to fill in platform_data, the new platform data struct was dynamically allocated, but the pointer to it was not used everywhere it should. It seems easier to fix this issue by removing the dynamic allocation altogether since its data is only used during driver probing. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-16gpio/pca953x: Fix IRQ support.David Jander1-1/+3
It seems that in the normal case, IRQ_NOREQUEST needs to be explicitly cleared, otherwise claiming the interrupt fails. In the case of sparse interrupts, the descriptor needs to be allocated first. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-08gpio/pca953x: Fix warning of enabled interrupts in handlerDavid Jander1-3/+3
When using nested threaded irqs, use handle_nested_irq(). This function does not call the chip handler, so no handler is set. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-08gpio/pca953x: Interrupt pin is active-lowDavid Jander1-1/+1
The interrupt pin of the PCA953x is active low, and on the rising edge no interrupt should be produced. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-08gpio/pca953x: Fix IRQ support.David Jander1-1/+5
It seems that in the normal case, IRQ_NOREQUEST needs to be explicitly cleared, otherwise claiming the interrupt fails. In the case of sparse interrupts, the descriptor needs to be allocated first. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06gpio: reorganize driversGrant Likely1-0/+768
Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 04:07:35 +0300