summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-mvebu.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-04drivers: gpio: mvebu: use devm_platform_ioremap_resource()Enrico Weigelt, metux IT consult1-5/+2
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-10gpio: mvebu: implement get_directionBaruch Siach1-0/+11
struct gpio_chip documentation recommends to always implement this callback function. A more concrete motivation is to be able (in combination with GPIOD_ASIS) to detect whether the bootloader has changed the state of a GPIO signal. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-29Merge tag 'gpio-v4.21-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.21 kernel series. Core changes: - Some core changes are already in outside of this pull request as they came through the regulator tree, most notably devm_gpiod_unhinge() that removes devres refcount management from a GPIO descriptor. This is needed in subsystems such as regulators where the regulator core need to take over the reference counting and lifecycle management for a GPIO descriptor. - We dropped devm_gpiochip_remove() and devm_gpio_chip_match() as nothing needs it. We can bring it back if need be. - Add a global TODO so people see where we are going. This helps setting the direction now that we are two GPIO maintainers. - Handle the MMC CD/WP properties in the device tree core. (The bulk of patches activating this code is already merged through the MMC/SD tree.) - Augment gpiochip_request_own_desc() to pass a flag so we as gpiochips can request lines as active low or open drain etc even from ourselves. New drivers: - New driver for Cadence GPIO blocks. - New driver for Atmel SAMA5D2 PIOBU GPIO lines. Driver improvements: - A major refactoring of the PCA953x driver - this driver has been around for ages, and is now modernized to reduce code duplication that has stacked up and is using regmap to read write and cache registers. - Intel drivers are now maintained in a separate tree and start with a round of cleanups and unifications" * tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (99 commits) gpio: sama5d2-piobu: Depend on OF_GPIO gpio: Add Cadence GPIO driver dt-bindings: gpio: Add bindings for Cadence GPIO gpiolib-acpi: remove unused variable 'err', cleans up build warning gpio: mxs: read pin level directly instead of using .get gpio: aspeed: remove duplicated statement gpio: add driver for SAMA5D2 PIOBU pins dt-bindings: arm: atmel: describe SECUMOD usage as a GPIO controller gpio/mmc/of: Respect polarity in the device tree dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) support memory: omap-gpmc: Get the header of the enum ARM: omap1: Fix new user of gpiochip_request_own_desc() gpio: pca953x: Add regmap dependency for PCA953x driver gpio: raspberrypi-exp: decrease refcount on firmware dt node gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB gpio: pca953x: Restore registers after suspend/resume cycle gpio: pca953x: Zap single use of pca953x_read_single() gpio: pca953x: Zap ad-hoc reg_output cache gpio: pca953x: Zap ad-hoc reg_direction cache gpio: pca953x: Perform basic regmap conversion ...
2018-12-21gpio: mvebu: only fail on missing clk if pwm is actually to be usedUwe Kleine-König1-3/+3
The gpio IP on Armada 370 at offset 0x18180 has neither a clk nor pwm registers. So there is no need for a clk as the pwm isn't used anyhow. So only check for the clk in the presence of the pwm registers. This fixes a failure to probe the gpio driver for the above mentioned gpio device. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-14gpio: Pass a flag to gpiochip_request_own_desc()Linus Walleij1-1/+1
Before things go out of hand, make it possible to pass flags when requesting "own" descriptors from a gpio_chip. This is necessary if the chip wants to request a GPIO with active low semantics, for example. Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Roger Quadros <rogerq@ti.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: mvebu: Use the proper APIsLinus Walleij1-12/+8
The MVEBU driver is requesting GPIO descriptors from itself, which is fine, but we have proper APIs to do this in a controlled way, so stop calling into the private functions of the GPIO library and use the gpiochip_* functions instead. Only include <linux/gpio/driver.h> and <linux/gpio/consumer.h> since we are both producers and consumers in this case. Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: mvebu: Fix cause computation in irq handlerGregory CLEMENT1-1/+1
When switching to regmap, the way to compute the irq cause was reorganized. However while doing it, a typo was introduced: a 'xor' replaced a 'and'. This lead to wrong behavior in the interrupt handler ans one of the symptom was wrong irq handler called on the Armada 388 GP: "->handle_irq(): c016303c, handle_bad_irq+0x0/0x278 ->irq_data.chip(): c0b0ec0c, 0xc0b0ec0c ->action(): (null) IRQ_NOPROBE set IRQ_NOREQUEST set unexpected IRQ trap at vector 00 irq 0, desc: ee804800, depth: 1, count: 0, unhandled: 0" Fixes: 2233bf7a92e7 ("gpio: mvebu: switch to regmap for register access") Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-07Merge tag 'gpio-v4.13-1' of ↵Linus Torvalds1-208/+332
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ...
2017-06-20gpio: mvebu: change compatible string for PWM supportRalph Sennhauser1-3/+3
As it turns out more than just Armada 370 and XP support using GPIO lines as PWM lines. For example the Armada 38x family has the same hardware support. As such "marvell,armada-370-xp-gpio" for the compatible string is a misnomer. Change the compatible string to "marvell,armada-370-gpio" before the driver makes it out of the -rc stage. This also follows the practice of using only the first device family supported as part of the name. Also update the documentation and comments in the code accordingly. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16gpio: mvebu: Add support for the Armada 7K/8K SoCsGregory CLEMENT1-71/+141
The Armada 7K and 8K SoCs use the same gpio controller as most of the other mvebu SoCs. However, the main difference is that the GPIO controller is part of a bigger system controller, and a syscon is used to control the overall system controller. Therefore, the driver needs to be adjusted to retrieve the regmap of the syscon to access registers, and account for the fact that registers are located at a certain offset within the regmap. This commit add the support of the syscon and introduce a new variant for this case. It was based on the preliminary work of Thomas Petazzoni. Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16gpio: mvebu: fix regmap_update_bits usageGregory CLEMENT1-2/+2
In some place in the driver regmap_update_bits was misused. Indeed the last argument is not the value of the bit (or group of bits) itself but the mask value inside the register. So when setting the bit N, then the value must be BIT(N) and not 1. CC: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Tested-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09gpio: mvebu: fix gpio bank registration when pwm is usedRichard Genoud1-0/+7
If more than one gpio bank has the "pwm" property, only one will be registered successfully, all the others will fail with: mvebu-gpio: probe of f1018140.gpio failed with error -17 That's because in alloc_pwms(), the chip->base (aka "int pwm"), was not set (thus, ==0) ; and 0 is a meaningful start value in alloc_pwm(). What was intended is mvpwm->chip->base = -1. Like that, the numbering will be done auto-magically Moreover, as the region might be already occupied by another pwm, we shouldn't force: mvpwm->chip->base = 0 nor mvpwm->chip->base = id * MVEBU_MAX_GPIO_PER_BANK; Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09gpio: mvebu: fix blink counter register selectionRichard Genoud1-1/+1
The blink counter A was always selected because 0 was forced in the blink select counter register. The variable 'set' was obviously there to be used as the register value, selecting the B counter when id==1 and A counter when id==0. Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23gpio: mvebu: switch to regmap for register accessThomas Petazzoni1-191/+245
In order to be able to use this driver with the Armada 7K/8K SoCs, we need to use the regmap to access the registers. Indeed for these new SoCs, the gpio node will be part of a syscon. [gregory.clement@free-electrons.com: - fixed merge conflcit from 4.10 to 4.12-rc1 - added a commit log] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23gpio: mvebu: sort header includeGregory CLEMENT1-8/+8
This commit sorts alphabetically the header files. Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24gpio: mvebu: Add limited PWM supportAndrew Lunn1-12/+315
Armada 370/XP devices can 'blink' GPIO lines with a configurable on and off period. This can be modelled as a PWM. However, there are only two sets of PWM configuration registers for all the GPIO lines. This driver simply allows a single GPIO line per GPIO chip of 32 lines to be used as a PWM. Attempts to use more return EBUSY. Due to the interleaving of registers it is not simple to separate the PWM driver from the GPIO driver. Thus the GPIO driver has been extended with a PWM driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> URL: https://patchwork.ozlabs.org/patch/427287/ URL: https://patchwork.ozlabs.org/patch/427295/ [Ralph Sennhauser: * Port forward * Merge PWM portion into gpio-mvebu.c * Switch to atomic PWM API * Add new compatible string marvell,armada-370-xp-gpio * Update and merge documentation patch * Update MAINTAINERS] Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23gpio: mvebu: use BIT macro instead of bit shiftingRalph Sennhauser1-16/+17
Use the BIT macro instead of explicitly shifting bits for some added clarity. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: mvebu: let the compiler inlineRalph Sennhauser1-11/+7
A modern compiler should know better when to inline, so drop the inline keywords. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: mvebu: extra whitespace fixesRalph Sennhauser1-7/+6
Fix whitespace errors missed by checkpatch. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: mvebu: checkpatch: whitespace fixesRalph Sennhauser1-0/+1
Fix whitespace errors reported by checkpatch. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: mvebu: checkpatch: unsigned int fixesRalph Sennhauser1-6/+7
Use unsigned int instead of plain unsigned as reported by checkpatch. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: mvebu: start multiline block comments with blank lineRalph Sennhauser1-2/+4
While this isn't an issue according to checkpatch two styles are used. Add a blank line to the block comments missing a blank line at the start so multiline block comments look the same across the file. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: mvebu: checkpatch: block comment fixesRalph Sennhauser1-8/+16
Fix issues in block comments reported by checkpatch. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11gpio: mvebu: fix warning when building on 64-bitRussell King1-1/+1
Casting a pointer to an int is not portable, and provokes a compiler warning. Cast to unsigned long instead to avoid the warning. drivers/gpio/gpio-mvebu.c: In function 'mvebu_gpio_probe': drivers/gpio/gpio-mvebu.c:662:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] soc_variant = (int) match->data; ^ This will be needed when building gpio-mvebu for Armada 7k/8k ARM64 SoCs. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-01gpio/mvebu: Use irq_domain_add_linearJason Gunthorpe1-49/+43
This fixes the irq allocation in this driver to not print: irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated irq: Cannot allocate irq_descs @ IRQ66, assuming pre-allocated Which happens because the driver already called irq_alloc_descs() and so the change to use irq_domain_add_simple resulted in calling irq_alloc_descs() twice. Modernize the irq allocation in this driver to use the irq_domain_add_linear flow directly and eliminate the use of irq_domain_add_simple/legacy Fixes: ce931f571b6d ("gpio/mvebu: convert to use irq_domain_add_simple()") Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31gpio: mvebu: make explicitly non-modularPaul Gortmaker1-3/+2
The Kconfig currently controlling compilation of this code is: drivers/gpio/Kconfig:config GPIO_MVEBU drivers/gpio/Kconfig: def_bool y ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-23gpio: mvebu: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-8/+3
Use devm_gpiochip_add_data() for GPIO registration and clean the error path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-01-05gpio: mvebu: use gpiochip data pointerLinus Walleij1-15/+8
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-1/+1
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16gpio: replace trivial implementations of request/free with generic oneJonas Gorski1-12/+2
Replace all trivial request/free callbacks that do nothing but call into pinctrl code with the generic versions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: James Hogan <james.hogan@imgtec.com> Acked-by: Stefan Agner <stefan@agner.ch> Acked-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-1/+1
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-07-14gpio/mvebu: Prepare mvebu_gpio_irq_handler for irq argument removalThomas Gleixner1-1/+1
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org
2015-07-14gpio: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descJiang Liu1-1/+1
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Preparatory patch for the removal of the 'irq' argument from irq flow handlers. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-14gpio/mvebu: Consolidate chained IRQ handler install/removeThomas Gleixner1-2/+2
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle: Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org
2015-04-08gpio: mvebu: Fix mask/unmask managment per irq chip typeGregory CLEMENT1-8/+16
Level IRQ handlers and edge IRQ handler are managed by tow different sets of registers. But currently the driver uses the same mask for the both registers. It lead to issues with the following scenario: First, an IRQ is requested on a GPIO to be triggered on front. After, this an other IRQ is requested for a GPIO of the same bank but triggered on level. Then the first one will be also setup to be triggered on level. It leads to an interrupt storm. The different kind of handler are already associated with two different irq chip type. With this patch the driver uses a private mask for each one which solves this issue. It has been tested on an Armada XP based board and on an Armada 375 board. For the both boards, with this patch is applied, there is no such interrupt storm when running the previous scenario. This bug was already fixed but in a different way in the legacy version of this driver by Evgeniy Dushistov: 9ece8839b1277fb9128ff6833411614ab6c88d68 "ARM: orion: Fix for certain sequence of request_irq can cause irq storm". The fact the new version of the gpio drive could be affected had been discussed there: http://thread.gmane.org/gmane.linux.ports.arm.kernel/344670/focus=364012 Reported-by: Evgeniy A. Dushistov <dushistov@mail.ru> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: <stable@vger.kernel.org> # v3.7 + Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15gpio: mvebu: Fix probe cleanup on errorAndrew Lunn1-6/+17
Ensure that when there is an error during probe that the gpiochip is removed and the generic irq chip is removed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15gpio: mvebu: checkpatch fixesAndrew Lunn1-35/+42
Wrap some long lines. Prefer seq_puts() over seq_printf(). space to tab conversions. Spelling error fix. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-03gpio: mvebu: add suspend/resume supportThomas Petazzoni1-0/+99
This commit adds the implementation of ->suspend() and ->resume() platform_driver hooks in order to save and restore the state of the GPIO configuration. In order to achieve that, additional fields are added to the mvebu_gpio_chip structure. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-20gpio: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-09gpio: mvebu: Remove initcall-based driver initializationEzequiel Garcia1-6/+1
There's no reason to use an initcall to initialize this driver, and regular module_platform_driver() can be used instead. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: mvebu: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: mvebu: remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-12gpio: mvebu: use chained_irq_{enter,exit} for GIC compatibilityThomas Petazzoni1-0/+7
On currently supported SoCs, the GPIO block used on Marvell EBU SoCs is always connected to the Marvell MPIC. However, we are going to introduce the support for newer Marvell EBU SoCs that use the Cortex-A9 core, and therefore use the GIC as their main interrupt controller, to which the GPIO block controlled by the gpio-mvebu driver is connected. The GIC interrupt controller driver uses the fasteoi flow handler. In order to ensure that the eoi hook of the GIC driver gets called, the GPIO driver should call chained_irq_enter() and chained_irq_exit() in its handler. Without this, the first GPIO interrupt locks up the system because it doesn't get acked at the GIC level. This change is similar to for example commit 0d978eb7349941139241a99acf05de6dd49b78d1 ("gpio: davinci: use chained_irq_enter/chained_irq_exit API"). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-02gpio: mvebu: Do not hard code error codeSachin Kamat1-1/+1
Return the appropriate error code instead of hardcoding it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-09Merge tag 'v3.13-rc3' into develLinus Walleij1-1/+1
Linux 3.13-rc3
2013-12-04gpio/pinctrl: make gpio_chip members typed booleanLinus Walleij1-1/+1
This switches the two members of struct gpio_chip that were defined as unsigned foo:1 to bool, because that is indeed what they are. Switch all users in the gpio and pinctrl subsystems to assign these values with true/false instead of 0/1. The users outside these subsystems will survive since true/false is 1/0, atleast we set some kind of more strict typing example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: mvebu: make mvchip->irqbase signed for error handlingDan Carpenter1-1/+1
There is a bug in mvebu_gpio_probe() where we do: mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1); if (mvchip->irqbase < 0) { The problem is that mvchip->irqbase is unsigned so the error handling doesn't work. I have changed it to be a regular int. Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16drivers/gpio: simplify use of devm_ioremap_resourceJulia Lawall1-6/+1
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-25gpio: mvebu: Use irq_get_trigger_type() to get IRQ flagsJavier Martinez Canillas1-1/+1
Use irq_get_trigger_type() to get the IRQ trigger type flags instead calling irqd_get_trigger_type(irq_get_irq_data(irq)) Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/1371228049-27080-3-git-send-email-javier.martinez@collabora.co.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>