summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-lpc18xx.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-04drivers: gpio: lpc18xx: use devm_platform_ioremap_resource()Enrico Weigelt, metux IT consult1-4/+1
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-10gpio: lpc18xx: fix GPIO controller driver build as a moduleVladimir Zapolskiy1-2/+0
The problem is reported for allmodconfig build setup: ERROR: "irq_chip_retrigger_hierarchy" [drivers/gpio/gpio-lpc18xx.ko] undefined! make[2]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 make[1]: *** [Makefile:1271: modules] Error 2 My testing in runtime shows that it is sufficient to remove .irq_retrigger callback, which is assigned to unexported irq_chip_retrigger_hierarchy() function, I did't observe any regressions, and thus apparently it is a better fix rather than exporting the function defined in kernel/irq/chip.c (see commit 52b2a05fa7c8 ("genirq: Export IRQ functions for module use")) or sticking the GPIO controller driver build to built-in option only. Reported-by: kbuild test robot <lkp@intel.com> Fixes: 5ddabfe8d3de ("gpio: lpc18xx: add GPIO pin interrupt controller support") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-07gpio: lpc18xx: add GPIO pin interrupt controller supportVladimir Zapolskiy1-4/+263
The change adds support of LPC18xx/LPC43xx GPIO pin interrupt controller block within SoC GPIO controller. The new interrupt controller driver allows to configure and capture edge or level interrupts on 8 arbitrary selectedinput GPIO pins, and lift the signals to be reported as NVIC rising edge interrupts. Configuration of a particular GPIO pin to serve as interrupt and its mapping to an interrupt on NVIC is done by SCU pin controller, for more details see description of 'nxp,gpio-pin-interrupt' device tree property of a GPIO pin [1]. From LPC18xx and LPC43xx User Manuals the GPIO controller consists of the following blocks: * GPIO pin interrupt block at 0x40087000, this change adds its support, * GPIO GROUP0 interrupt block at 0x40088000, * GPIO GROUP1 interrupt block at 0x40089000, * GPIO port block at 0x400F4000, it is supported by the original driver. While all 4 sub-controller blocks have their own I/O addresses, moreover all 3 interrupt blocks are APB0 peripherals and high-speed GPIO block is an AHB slave, according to the hardware manual the GPIO controller is seen as a single block, and 4 sub-controllers have the shared reset signal RGU #28 and clock to register interface CLK_CPU_GPIO on CCU1. Likely support of two GPIO group interrupt blocks won't be added in short term, because the mechanism to mask several interrupt sources is not well defined. [1] Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-07gpio: lpc18xx: use resource managed interface to register GPIO controllerVladimir Zapolskiy1-2/+1
Slightly simplify deregistration of the GPIO controller driver. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-07gpio: lpc18xx: add struct device local variableVladimir Zapolskiy1-7/+8
This is a non-functional change, it simplifies multiple access to 'struct device' pointer derived from a platform device pointer, the new local variable will also be used in the following changes. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-07gpio: lpc18xx: use SPDX license identifierVladimir Zapolskiy1-4/+1
Replace GPLv2 header with the SPDX identifier. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13gpio: constify gpio_chip structuresJulia Lawall1-1/+1
These structures are only used to copy into other structures, so declare them as const. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct gpio_chip i@p = { ... }; @ok@ identifier r.i; expression e; position p; @@ e = i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct gpio_chip e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct gpio_chip i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: lpc18xx: use gpiochip data pointerLinus Walleij1-9/+4
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-1/+1
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16gpio: replace trivial implementations of request/free with generic oneJonas Gorski1-12/+2
Replace all trivial request/free callbacks that do nothing but call into pinctrl code with the generic versions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: James Hogan <james.hogan@imgtec.com> Acked-by: Stefan Agner <stefan@agner.ch> Acked-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-05gpio: add lpc18xx gpio driverJoachim Eastwood1-0/+180
Driver for the GPIO block found on NXP LPC18xx/43xx devices. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-11 12:39:41 +0300