summaryrefslogtreecommitdiff
path: root/drivers/extcon/extcon-max77843.c
AgeCommit message (Collapse)AuthorFilesLines
2022-12-03extcon: max77843: Replace irqchip mask_invert with unmask_baseAidan MacDonald1-2/+1
Remove use of the deprecated mask_invert flag. Inverted mask registers (where a '1' bit enables an IRQ) can be described more directly as an unmask register. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-24extcon: max77843: Return error code of extcon_dev_allocate()Krzysztof Kozlowski1-1/+1
devm_extcon_dev_allocate() can fail of multiple reasons. The call returns proper error code on failure so pass it instead of fixed ENOMEM. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24extcon: extcon-max77843: convert to i2c_new_dummy_deviceWolfram Sang1-3/+3
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-11-12extcon: max77843: Avoid forcing UART path on drive probeMarek Szyprowski1-3/+15
Driver unconditionally forces UART path during probe, probably to ensure that one can get kernel serial log as soon as possible. This approach causes some issues, especially when board is booted with non-UART cable connected to micro-USB port. For example, when USB cable is connected, UART TX/RX lines are unconditionally short-circuited to USB D+/D- lines. This is in turn recognized by a series of serial BREAK signals and some random characters when USB host tries to perform enumeration procedure. To solve the above issue and keep UART console operational as early as possible, set UART path only when USB ID reports UART capable cable. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-08-28extcon: maxim: Add SPDX license identifiersKrzysztof Kozlowski1-12/+7
Replace GPL v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-24extcon: max77843: Add support for SmartDock accessoryMarek Szyprowski1-14/+63
SmartDock uses ADC_RESERVED_ACC_3 (0x10) ADC ID type and provides following features: 1. USB host with embedded USB hub (2-4 ports) for mice, keyboard, etc, 2. MHL for video output, 3. charging. Tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-24extcon: max77843: Add OTG power control to the MUIC driverMarek Szyprowski1-0/+16
Enabling power on VBUS micro-usb pin is required only when passive OTG cable is connected. Initially OTG VBUS power control was planned to be done in charger driver. However such information is not really available from the extcon notifications, so VBUS power control has to be done directly in MUIC driver, which has all information about the attached accessory. For example SmartDock is externally powered accessory, provides OTG (USB HOST) functionality and use VBUS pin for charging a device battery, so the VBUS charging pump should be disabled in such case. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-23extcon: Split out extcon header file for consumer and provider deviceChanwoo Choi1-1/+1
The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device, this patch separates into extcon.h and extcon-provider.h. [Description for include/linux/{extcon.h|extcon-provider.h}] - extcon.h includes the extcon API and data structure for extcon consumer device driver. This header file contains the following APIs: : Register/unregister the notifier to catch the change of extcon device : Get the extcon device instance : Get the extcon device name : Get the state of each external connector : Get the property value of each external connector : Get the property capability of each external connector - extcon-provider.h includes the extcon API and data structure for extcon provider device driver. This header file contains the following APIs: : Include 'include/linux/extcon.h' : Allocate the memory for extcon device instance : Register/unregister extcon device : Set the state of each external connector : Set the property value of each external connector : Set the property capability of each external connector Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-01-09extcon: Restructure multi-line comments to follow codingstyleSrikant Ritolia1-8/+16
Aligning all block comments in extcon subsystem as per linux coding style. Found using checkpatch.pl script. Signed-off-by: Srikant Ritolia <s.ritolia@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-13extcon: Use the extcon_set_state_sync() instead of deprecated functionsChanwoo Choi1-11/+11
This patch alters the renamed extcon API to set the state of the external connectors instead of deprecated extcon_set_cable_state_(). Because the patch[1] modifies the function name to maintain the function naming pattern. - extcon_set_cable_state_() -> extcon_set_state_sync() - extcon_get_cable_state_() -> extcon_get_state() [1] https://lkml.org/lkml/2016/8/4/729 - extcon: Rename the extcon_set/get_state() to maintain the function naming pattern Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Roger Quadros <rogerq@ti.com>
2016-02-05extcon: max77843: Use correct size for reading the interrupt registerDan Carpenter1-1/+1
The info->status[] array has 3 elements. We are using size MAX77843_MUIC_IRQ_NUM (16) instead of MAX77843_MUIC_STATUS_NUM (3) as intended. Fixes: 135d9f7d135a ('extcon: max77843: Clear IRQ bits state before request IRQ') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jaewon Kim <jaewon02.kim@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [cw00.choi: Modify the patch title] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-01-25extcon: Add the EXTCON_CHG_USB_SDP to support SDP charing portChanwoo Choi1-0/+3
This patch adds the new EXTCON_CHG_USB_SDP connector to support SDP (Standard Downstream Port) USB charging port. The commit 11eecf910bd8 ("extcon: Modify the id and name of external connector") add the new EXTCON_CHG_USB_SDP connector which support the both data transfer and usb charging at the same time. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-12-15extcon: max77843: fix handling return value of regmap_irq_get_virqAndrzej Hajda1-1/+1
The function can return negative values, so its result should be assigned to signed variable. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-10-16extcon: Modify the id and name of external connectorChanwoo Choi1-12/+15
This patch modifies the id and name of external connector with the additional prefix to clarify both attribute and meaning of external connector as following: - EXTCON_CHG_* mean the charger connector. - EXTCON_JACK_* mean the jack connector. - EXTCON_DISP_* mean the display port connector. Following table show the new name of external connector with old name: -------------------------------------------------- Old extcon name | New extcon name | -------------------------------------------------- EXTCON_TA | EXTCON_CHG_USB_DCP | EXTCON_CHARGE_DOWNSTREAM| EXTCON_CHG_USB_CDP | EXTCON_FAST_CHARGER | EXTCON_CHG_USB_FAST | EXTCON_SLOW_CHARGER | EXTCON_CHG_USB_SLOW | -------------------------------------------------- EXTCON_MICROPHONE | EXTCON_JACK_MICROPHONE | EXTCON_HEADPHONE | EXTCON_JACK_HEADPHONE | EXTCON_LINE_IN | EXTCON_JACK_LINE_IN | EXTCON_LINE_OUT | EXTCON_JACK_LINE_OUT | EXTCON_VIDEO_IN | EXTCON_JACK_VIDEO_IN | EXTCON_VIDEO_OUT | EXTCON_JACK_VIDEO_OUT | EXTCON_SPDIF_IN | EXTCON_JACK_SPDIF_IN | EXTCON_SPDIF_OUT | EXTCON_JACK_SPDIF_OUT | -------------------------------------------------- EXTCON_HMDI | EXTCON_DISP_HDMI | EXTCON_MHL | EXTCON_DISP_MHL | EXTCON_DVI | EXTCON_DISP_DVI | EXTCON_VGA | EXTCON_DISP_VGA | -------------------------------------------------- And, when altering the name of USB charger connector, EXTCON refers to the "Battery Charging v1.2 Spec and Adopters Agreement"[1] to use the standard name of USB charging port as following. Following name of USB charging port are already used in power_supply subsystem. We chan check it on patch[2]. - EXTCON_CHG_USB_SDP /* Standard Downstream Port */ - EXTCON_CHG_USB_DCP /* Dedicated Charging Port */ - EXTCON_CHG_USB_CDP /* Charging Downstream Port */ - EXTCON_CHG_USB_ACA /* Accessory Charger Adapter */ [1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip [2] commit 85efc8a18ced ("power_supply: Add types for USB chargers") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [ckeepax: For the Arizona changes] Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2015-09-01Merge tag 'regulator-v4.3' of ↵Linus Torvalds1-25/+41
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "The biggest changes in the core this time around have been some refactorings that move us towards being able to drop the list of regulators maintained by the core and instead just use the driver model list maintained for the class devices for regulators which will make the code smaller and avoid some potential bugs. Otherwise another fairly quiet release for the regulator API, highlights include: - a new API for setting voltages based on a minimum, target, maximum triplet - support for continuous voltage ranges rather than tables of explicit steps in the PWM regulator, requiring less explicit configuration - new driver support for Dialog DA9215, Maxim 77843, Mediatek MT6311 and Qualcomm RPM" * tag 'regulator-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (70 commits) regulator: mt6311: fix platform_no_drv_owner.cocci warnings regulator: ltc3589: Remove unnecessary MODULE_ALIAS() regulator: ad5398: Remove unnecessary MODULE_ALIAS() regulator: pfuze100: Remove unnecessary MODULE_ALIAS() regulator: core: use debug level print in regulator_check_drms regulator: lp872x: handle error case regulator: lp872x: use the private data instead of updating I2C device platform data regulator: isl9305: Export OF module alias information regulators: max77693: register driver earlier to avoid deferred probe regulator: qcom_smd: Set n_voltages for pm8941_lnldo regulator: core: Use IS_ERR_OR_NULL() regulator: core: Define regulator_set_voltage_triplet() regulator: Regulator driver for the Qualcomm RPM regulator: pbias: Fix broken pbias disable functionality regulator: core: Spelling fix regulator: core: Use class device list for regulator_list in late init regulator: core: Move more deallocation into class unregister regulator: core: Reduce rdev locking region when releasing regulator Input: Remove the max77843 haptic driver Input: max77693: Add support for Maxim 77843 ...
2015-08-10extcon: max77843: Clear IRQ bits state before request IRQJaewon Kim1-0/+9
IRQ signal before driver probe is needless because driver sends current state after platform booting done. So, this patch clears MUIC IRQ bits before request IRQ. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-07-16mfd/extcon: max77843: Rename defines to allow inclusion with max77693Krzysztof Kozlowski1-17/+32
Add MAX77843_MUIC prefix to some of the defines used in max77843 extcon driver so the max77693-private.h can be included simultaneously with max77843-private.h. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16drivers: max77843: Switch to common max77693 state containerKrzysztof Kozlowski1-8/+9
Switch to the same definition of state container as in MAX77693 drivers. This will allow usage of one regulator driver in both devices: MAX77693 and MAX77843. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-13extcon: Redefine the unique id of supported external connectors without ↵Chanwoo Choi1-1/+1
'enum extcon' type This patch just redefine the unique id of supported external connectors without 'enum extcon' type. Because unique id would be used on devictree file(*.dts) to indicate the specific external connectors like key number of input framework. So, I have the plan to move this definitions to following header file which includes the unique id of supported external connectors. - include/dt-bindings/extcon/extcon.h Fixes: 2a9de9c0f08d ("extcon: Use the unique id for external connector instead of string") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-22extcon: Use the unique id for external connector instead of stringChanwoo Choi1-33/+23
This patch uses the unique id to identify the type of external connector instead of string name. The string name have the many potential issues. So, this patch defines the 'extcon' enumeration which includes all supported external connector on EXTCON subsystem. If new external connector is necessary, the unique id of new connector have to be added in 'extcon' enumeration. There are current supported external connector in 'enum extcon' as following: enum extcon { EXTCON_NONE = 0x0, /* USB external connector */ EXTCON_USB = 0x1, EXTCON_USB_HOST = 0x2, /* Charger external connector */ EXTCON_TA = 0x10, EXTCON_FAST_CHARGER = 0x11, EXTCON_SLOW_CHARGER = 0x12, EXTCON_CHARGE_DOWNSTREAM = 0x13, /* Audio and video external connector */ EXTCON_LINE_IN = 0x20, EXTCON_LINE_OUT = 0x21, EXTCON_MICROPHONE = 0x22, EXTCON_HEADPHONE = 0x23, EXTCON_HDMI = 0x30, EXTCON_MHL = 0x31, EXTCON_DVI = 0x32, EXTCON_VGA = 0x33, EXTCON_SPDIF_IN = 0x34, EXTCON_SPDIF_OUT = 0x35, EXTCON_VIDEO_IN = 0x36, EXTCON_VIDEO_OUT = 0x37, /* Miscellaneous external connector */ EXTCON_DOCK = 0x50, EXTCON_JIG = 0x51, EXTCON_MECHANICAL = 0x52, EXTCON_END, }; For example in extcon-arizona.c: To use unique id removes the potential issue about handling the inconsistent name of external connector with string. - Previously, use the string to register the type of arizona jack connector static const char *arizona_cable[] = { "Mechanical", "Microphone", "Headphone", "Line-out", }; - Newly, use the unique id to register the type of arizona jack connector static const enum extcon arizona_cable[] = { EXTCON_MECHANICAL, EXTCON_MICROPHONE, EXTCON_HEADPHONE, EXTCON_LINE_OUT, EXTCON_NONE, }; And this patch modify the prototype of extcon_{get|set}_cable_state_() which uses the 'enum extcon id' instead of 'cable_index'. Because although one more extcon drivers support USB cable, each extcon driver might has the differnt 'cable_index' for USB cable. All extcon drivers can use the unique id number for same external connector with modified extcon_{get|set}_cable_state_(). - Previously, use 'cable_index' on these functions: extcon_get_cable_state_(struct extcon_dev*, int cable_index) extcon_set_cable_state_(struct extcon_dev*, int cable_index, bool state) -Newly, use 'enum extcon id' on these functions: extcon_get_cable_state_(struct extcon_dev*, enum extcon id) extcon_set_cable_state_(struct extcon_dev*, enum extcon id, bool state) Cc: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [arnd: Report the build break about drivers/usb/phy/phy-tahvo.c after using the unique id for external connector insteadf of string] Reported-by: Arnd Bergmann <arnd@arndb.de> [dan.carpenter: Report the build warning of extcon_{set|get}_cable_state_()] Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
2015-05-19extcon: Alter MHL-TA cable name to TA cable nameChanwoo Choi1-4/+2
This patch alters the MHL-TA cable name to TA cable name because MHL-TA is not standard name. The MHL-TA is MHL cable with charger cable (TA or USB). So, this patch use the TA cable instead of MHL-TA to inform the charger cable state. - MHL-TA -> TA Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-05-19extcon: Unify the jig cable names on rt8973 and max14577/77693/77843Chanwoo Choi1-25/+12
This patch change the name of various jig cables as 'JIG' because the name of various jig cables are strange and ambiguous on user-space aspect. They include the different information of either USB and UART state. It is never important for user-space process. This patch unifies the name of jig cables as following: - JIG-USB-ON -->|--> JIG - JIG-USB-OFF -->| - JIG-UART-ON -->| - JIG-UART-OFF -->| Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-03-23extcon: max77843: Fix an error code in max77843_init_muic_regmap()Dan Carpenter1-1/+1
The i2c_new_dummy() return the NULL if error happen. So, If i2c_new_dummy() return NULL, max77843_init_muic_regmap() return the proper error value (-ENOMEM); Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [cw00.choi: Use -ENOMEM instead of -ENODEV and modify patch description] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-03-16extcon: max77843: Fix signedness bug in max77843_muic_set_debounce_time()Dan Carpenter1-1/+1
This patch fixes the variable type of 'ret' from 'unsigned int' to 'int' type because the return type of regmap_update_bits() is 'int' type. Fixes: 27a28d32b4f2 ('extcon: max77843: Add max77843 MUIC driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [cw00.choi: Fix the patch description] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-02-24extcon: max77843: Add max77843 MUIC driverJaewon Kim1-0/+881
This patch adds MAX77843 extcon driver to support for MUIC(Micro USB Interface Controller) device by using EXTCON subsystem to handle various external connectors. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>