summaryrefslogtreecommitdiff
path: root/drivers/edac
AgeCommit message (Collapse)AuthorFilesLines
2006-05-04[PATCH] EDAC Coexistence with BIOSmark gross1-1/+16
Address the issue of EDAC/BIOS coexistence for the e752x chip-sets. We have found a problem where the BIOS will start the system with the error registers (dev0:fun1) hidden and assuming it has exclusive access to them. The edac driver violates this assumption. The workaround this patch offers is to honor the hidden-ness as an indication that it is not safe to use those registers. Signed-off-by: Mark Gross <mark.gross@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-01[PATCH] edac_752x needs CONFIG_HOTPLUGRandy Dunlap1-1/+1
EDAC_752X uses pci_scan_single_device(), which is only available if CONFIG_HOTPLUG is enabled, so limit this driver with HOTPLUG. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Dave Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] Typo fixesAlexey Dobriyan1-1/+1
Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: use EXPORT_SYMBOL_GPLDave Peterson1-14/+14
Change all instances of EXPORT_SYMBOL() in the core EDAC module to EXPORT_SYMBOL_GPL(). Signed-off-by: David S. Peterson <dsp@llnl.gov> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: use sysbus_message in e752x codeDave Peterson1-4/+2
Patch from Dave Jiang <djiang@mvista.com>: Fix EDAC e752x driver so it outputs sysbus-specific error message when sysbus error detected. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: formatting cleanupDave Peterson8-602/+558
Cosmetic indentation/formatting cleanup for EDAC code. Make sure we are using tabs rather than spaces to indent, etc. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: reorder EXPORT_SYMBOL macrosDave Peterson1-25/+13
Fix EDAC code so EXPORT_SYMBOL comes after the function that is being exported. This is to maintain consistency with the rest of the kernel. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: Kconfig dependency changesDave Peterson1-5/+5
- Add x86 dependency in drivers/edac/Kconfig for all current platform-specific modules. - Add PCI dependency to Radisys 82600 driver Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: protect memory controller listDave Peterson8-49/+37
- Fix code so we always hold mem_ctls_mutex while we are stepping through the list of mem_ctl_info structures. Otherwise bad things may happen if one task is stepping through the list while another task is modifying it. We may eventually want to use reference counting to manage the mem_ctl_info structures. In the meantime we may as well fix this bug. - Don't disable interrupts while we are walking the list of mem_ctl_info structures in check_mc_devices(). This is unnecessary. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: kobject/sysfs fixesDave Peterson2-43/+42
- After we unregister a kobject, wait for our kobject release method to call complete(). This causes us to wait until the kobject reference count reaches 0. Otherwise, a task accessing the EDAC sysfs interface can hold the reference count above 0 until after the EDAC module has been unloaded. When the reference count finally drops to 0, this will result in an attempt to call our release method inside the EDAC module after the module has already been unloaded. This isn't the best fix, since a process can get stuck sleeping forever uninterruptibly if the user does the following: rmmod my_module < /sys/my_sysfs/file I'll go back and implement a better fix later. However this should be ok for now. - Call edac_remove_sysfs_mci_device() from edac_mc_del_mc() rather than from edac_mc_free(). Since edac_mc_add_mc() calls edac_create_sysfs_mci_device(), edac_mc_del_mc() should call edac_remove_sysfs_mci_device(). Signed-off-by: David S. Peterson <dsp@llnl.gov> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: kobject_init/kobject_put fixesDave Peterson1-24/+7
- Remove calls to kobject_init(). These are unnecessary because kobject_register() calls kobject_init(). - Remove extra calls to kobject_put(). When we call kobject_unregister(), this releases our reference to the kobject. The extra calls to kobject_put() may cause the reference count to drop to 0 while a kobject is still in use. Signed-off-by: David S. Peterson <dsp@llnl.gov> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: edac_mc_add_mc fix [2/2]Dave Peterson1-8/+9
This is part 2 of a 2-part patch set. Fix edac_mc_add_mc() so it cleans up properly if call to edac_create_sysfs_mci_device() fails. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: edac_mc_add_mc fix [1/2]Dave Peterson1-18/+18
This is part 1 of a 2-part patch set. The code changes are split into two parts to make the patches more readable. Move complete_mc_list_del() and del_mc_from_global_list() so we can call del_mc_from_global_list() from edac_mc_add_mc() without forward declarations. Perhaps using forward declarations would be better? I'm doing things this way because the rest of the code is missing them. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: cleanup code for clearing initial errorsDave Peterson7-44/+13
Fix xxx_probe1() functions so they call xxx_get_error_info() functions to clear initial errors. This is simpler and cleaner than duplicating the low-level code for accessing PCI config space. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: e7xxx fix minor logic bugDave Peterson1-1/+1
Fix minor logic bug in e7xxx_remove_one(). Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: i82875p cleanupDave Peterson1-22/+32
- Fix i82875p_probe1() so it calls pci_get_device() instead of pci_find_device(). - Fix i82875p_probe1() so it cleans up properly on failure. - Fix i82875p_init() so it cleans up properly on failure. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: i82860 cleanupDave Peterson1-11/+17
- Fix i82860_init() so it cleans up properly on failure. - Fix i82860_exit() so it cleans up properly. - Fix typo in comment (i.e. www.redhat.com.com). Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: e752x cleanupDave Peterson1-28/+7
- Add ctl_dev field to "struct e752x_dev_info". Then we can eliminate ugly switch statement from e752x_probe1(). - Remove code from e752x_probe1() that clears initial PCI bus parity errors. The core EDAC module already does this. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: amd76x pci_dev_get/pci_dev_put fixesDave Peterson1-6/+2
Eliminate unnecessary calls to pci_dev_get() and pci_dev_put() from amd76x driver. Signed-off-by: David S. Peterson <dsp@llnl.gov> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: name cleanupDave Peterson7-15/+15
Perform the following name substitutions on all source files: sed 's/BS_MOD_STR/EDAC_MOD_STR/g' sed 's/bs_thread_info/edac_thread_info/g' sed 's/bs_thread/edac_thread/g' sed 's/bs_xstr/edac_xstr/g' sed 's/bs_str/edac_str/g' The names that start with BS_ or bs_ are artifacts of when the code was called "bluesmoke". Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: printk cleanupDave Peterson8-240/+275
This implements the following idea: On Monday 30 January 2006 19:22, Eric W. Biederman wrote: > One piece missing from this conversation is the issue that we need errors > in a uniform format. That is why edac_mc has helper functions. > > However there will always be errors that don't fit any particular model. > Could we add a edac_printk(dev, ); That is similar to dev_printk but > prints out an EDAC header and the device on which the error was found? > Letting the rest of the string be user specified. > > For actual control that interface may be to blunt, but at least for people > looking in the logs it allows all of the errors to be detected and > harvested. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: switch to kthread_ APIDave Peterson1-78/+10
This patch was originally posted by Christoph Hellwig (see http://lkml.org/lkml/2006/2/14/331): "Christoph Hellwig" <hch@lst.de> wrote: > Use the kthread_ API instead of opencoding lots of hairy code for kernel > thread creation and teardown, including tasklist_lock abuse. > Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Peterson <dsp@llnl.gov> Cc: <dave_peterson@pobox.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-14[PATCH] EDAC: disable sysfs interfaceDave Peterson1-2/+42
- Disable the EDAC sysfs code. The sysfs interface that EDAC presents to user space needs more thought, and is likely to change substantially. Therefore disable it for now so users don't start depending on it in its current form. - Disable the default behavior of calling panic() when an uncorrectible error is detected (since for now, there is no sysfs interface that allows the user to configure this behavior). Signed-off-by: David S. Peterson <dsp@llnl.gov> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-11[PATCH] edac: disable a few sysfs files to avoid them becoming an ABIArjan van de Ven1-3/+9
Disable (via ugly #if 0's) the 3 sysfs files that I think by now we all agree are very much wrong. These files shouldn't become part of the ABI by the 2.6.16 release, so I rather have this minimal patch merged to disable them for now, the real fix can then come during the 2.6.17 devel window. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-10[PATCH] edac: mark as experimentalTim Small1-3/+15
EDAC is still causing a few problems and the code is relatively green. Mark it as experimental until thing settle down. Also, provide some documentation pointers in Kconfig help. Signed-off-by: Tim Small <tim@buttersideup.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-08[PATCH] drivers/edac/i82875p_edac.c __user annotationsAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-05[PATCH] x86_64: Remove rogue default y in EDAC KconfigAndi Kleen1-1/+0
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] edac_mc: Remove include of version.hEric W. Biederman1-1/+0
By including version.h edac_mc was rebuilding on every incremental build. Which defeats the point of incremental builds. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] edac: use C99 initializers (sparse warnings)Randy Dunlap1-4/+4
drivers/edac/e752x_edac.c:1042:7: warning: obsolete struct initializer, use C99 syntax Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] EDAC config cleanupDave Jones1-1/+1
The AMD76x chipsets aren't used in 64-bit, so don't offer the driver to the user. Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19[PATCH] EDAC: core EDAC support codeAlan Cox10-11/+2790
This is a subset of the bluesmoke project core code, stripped of the NMI work which isn't ready to merge and some of the "interesting" proc functionality that needs reworking or just has no place in kernel. It requires no core kernel changes except the added scrub functions already posted. The goal is to merge further functionality only after the core code is accepted and proven in the base kernel, and only at the point the upstream extras are really ready to merge. From: doug thompson <norsk5@xmission.com> This converts EDAC to sysfs and is the final chunk neccessary before EDAC has a stable user space API and can be considered for submission into the base kernel. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: doug thompson <norsk5@xmission.com> Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19[PATCH] EDAC: drivers for Radisys 82600Alan Cox1-0/+407
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19[PATCH] EDAC: drivers for Intel i82860, i82875Alan Cox2-0/+831
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19[PATCH] EDAC: drivers for AMD 76x and Intel E750x, E752xAlan Cox3-0/+1983
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-25 21:11:19 +0300