summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)AuthorFilesLines
2022-09-29dmaengine: qcom: gpi: move read_lock_bh to read_lock in taskletTuo Cao1-3/+3
it is unnecessary to call read_lock_bh in a tasklet. Signed-off-by: Tuo Cao <91tuocao@gmail.com> Link: https://lore.kernel.org/r/20220814131323.7029-1-91tuocao@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: mxs: use platform_driver_registerDario Binacchi1-7/+4
Driver registration fails on SOC imx8mn as its supplier, the clock control module, is probed later than subsys initcall level. This driver uses platform_driver_probe which is not compatible with deferred probing and won't be probed again later if probe function fails due to clock not being available at that time. This patch replaces the use of platform_driver_probe with platform_driver_register which will allow probing the driver later again when the clock control module will be available. The __init annotation has been dropped because it is not compatible with deferred probing. The code is not executed once and its memory cannot be freed. Fixes: a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28") Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220921170556.1055962-1-dario.binacchi@amarulasolutions.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-05dmaengine: dw-axi-dmac: Drop obsolete dependency on COMPILE_TESTJean Delvare1-1/+1
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220803223448.6f08095b@endymion.delvare Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-05dmaengine: at_xdmac: Replace two if statements with only one with two conditionsTudor Ambarus1-4/+1
Add a cosmetic change and replace two if statements with a single if statement with two conditions. In case the optional txstate parameter is NULL, we return the dma_cookie_status, which is fine, no functional change required. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220802140630.243550-1-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-05dmaengine: pl330: Remove unused flagsHarini Katakam1-4/+0
txd.flags is unused and need not be updated. Signed-off-by: Harini Katakam <harini.katakam@amd.com> Link: https://lore.kernel.org/r/20220802102232.17653-1-harini.katakam@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-05dmaengine: zynqmp_dma: Typecast with enum to fix the coverity warningShravya Kumbham1-1/+1
Typecast the flags variable with (enum dma_ctrl_flags) in zynqmp_dma_prep_memcpy function to fix the coverity warning. Addresses-Coverity: Event mixed_enum_type. Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1653378553-28548-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-05dmaengine: ti: k3-udma-private: Fix refcount leak bug in of_xudma_dev_get()Liang He1-3/+3
We should call of_node_put() for the reference returned by of_parse_phandle() in fail path or when it is not used anymore. Here we only need to move the of_node_put() before the check. Fixes: d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users") Signed-off-by: Liang He <windhl@126.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220720073234.1255474-1-windhl@126.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-05dmaengine: stm32-dmamux: Simplify code and save a few bytes of memoryChristophe JAILLET1-7/+1
STM32_DMAMUX_MAX_DMA_REQUESTS is small (i.e. 32) and when the 'dma_inuse' bitmap is allocated, there is already a check that 'dma_req' is <= this limit. So, there is no good reason to dynamically allocate this bitmap. This just waste some memory and some cycles. Use DECLARE_BITMAP with the maximum bitmap size instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/2d8c24359b2daa32ce0597a2949b7b2bebaf23de.1659211633.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-05dmaengine: stm32-dmamux: Fix comment typoJason Wang1-1/+1
The double `end' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Link: https://lore.kernel.org/r/20220811120959.18752-1-wangborong@cdjrlc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-05dmaengine: sf-pdma:Remove the print function dev_err()ye xingchen1-6/+2
>From the coccinelle check: ./drivers/dma/sf-pdma/sf-pdma.c Error:line 409 is redundant because platform_get_irq() already prints an error ./drivers/dma/sf-pdma/sf-pdma.c Error:line 424 is redundant because platform_get_irq() already prints an error So,remove the unnecessary print function dev_err() Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/20220810062532.13425-1-ye.xingchen@zte.com.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-05dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflowVaishnav Achath1-8/+17
UDMA_CHAN_RT_*BCNT_REG stores the real-time channel bytecount statistics. These registers are 32-bit hardware counters and the driver uses these counters to monitor the operational progress status for a channel, when transferring more than 4GB of data it was observed that these counters overflow and completion calculation of a operation gets affected and the transfer hangs indefinitely. This commit adds changes to decrease the byte count for every complete transaction so that these registers never overflow and the proper byte count statistics is maintained for ongoing transaction by the RT counters. Earlier uc->bcnt used to maintain a count of the completed bytes at driver side, since the RT counters maintain the statistics of current transaction now, the maintenance of uc->bcnt is not necessary. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220802054835.19482-1-vaishnav.a@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API ↵Swati Agarwal1-1/+5
failure The driver does not handle the failure case while calling dma_set_mask_and_coherent API. In case of failure, capture the return value of API and then report an error. Addresses-coverity: Unchecked return value (CHECKED_RETURN) Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/20220817061125.4720-4-swati.agarwal@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores propertySwati Agarwal1-1/+1
Free the allocated resources for missing xlnx,num-fstores property. Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com> Link: https://lore.kernel.org/r/20220817061125.4720-3-swati.agarwal@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handlingSwati Agarwal1-6/+7
Add missing cleanup in devm_platform_ioremap_resource(). When probe fails remove dma channel resources and disable clocks in accordance with the order of resources allocated . Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com> Link: https://lore.kernel.org/r/20220817061125.4720-2-swati.agarwal@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: hsu: Include headers we are direct user ofAndy Shevchenko3-1/+13
For the sake of integrity, include headers we are direct user of. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220713172235.22611-4-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: hsu: Use GENMASK() consistentlyAndy Shevchenko1-3/+4
For the masks replace chain of BIT() macros by GENMASK(). While at it, explicitly include bits.h. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220713172235.22611-3-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: hsu: using for_each_set_bit to simplify the codeAndy Shevchenko1-11/+8
It's more cleanly to use for_each_set_bit() instead of opencoding it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220713172235.22611-2-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: hsu: Finish conversion to managed resourcesAndy Shevchenko1-15/+12
With help of devm_add_action_or_reset() we may finish conversion the driver to use managed resources. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220713172235.22611-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: stm32-mdma: add support to be triggered by STM32 DMAAmelie Delaunay1-1/+69
STM32 MDMA can be triggered by STM32 DMA channels transfer complete. In case of non-null struct dma_slave_config .peripheral_size, it means the DMA client wants the DMA to trigger the MDMA. stm32-mdma driver gets the request id, the mask_addr, and the mask_data in struct stm32_mdma_dma_config passed by DMA with struct dma_slave_config .peripheral_config/.peripheral_size. Then, as DMA is configured in Double-Buffer mode, and MDMA channel will transfer data from/to SRAM to/from DDR, then bursts are optimized. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220829154646.29867-7-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: stm32-dma: add support to trigger STM32 MDMAAmelie Delaunay1-1/+46
STM32 MDMA can be triggered by STM32 DMA channels transfer complete. The "request line number" triggering STM32 MDMA is the STM32 DMAMUX channel id set by stm32-dmamux driver in dma_spec->args[3]. stm32-dma driver fills the struct stm32_dma_mdma_config used to configure the MDMA with struct dma_slave_config .peripheral_config/.peripheral_size. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220829154646.29867-6-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: stm32-dmamux: set dmamux channel id in dma features bitfieldAmelie Delaunay1-1/+1
STM32 DMAMUX is used with STM32 DMA1 and DMA2: - DMAMUX channels 0 to 7 are connected to DMA1 channels 0 to 7 - DMAMUX channels 8 to 15 are connected to DMA2 channels 0 to 7 STM32 MDMA can be triggered by DMA1 and DMA2 channels transfer complete, and the "request line number" is the DMAMUX channel id (e.g. DMA2 channel 0 triggers MDMA with request line 8). To well configure MDMA, set DMAMUX channel id in DMA features bitfield, so that DMA can update struct dma_slave_config peripheral_config properly. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220829154646.29867-5-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: stm32-dma: use bitfield helpersAmelie Delaunay1-35/+25
Use the FIELD_{GET,PREP}() helpers, instead of defining custom macros implementing the same operations. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220829154646.29867-3-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: stm32-dma: introduce 3 helpers to address channel flagsAmelie Delaunay1-17/+12
Channels 0 to 3 flags are described in DMA_LISR and DMA_LIFCR (L as Low). Channels 4 to 7 flags are described in DMA_HISR and DMA_HIFCR (H as High). Macro STM32_DMA_ISR(n) returns the interrupt status register offset for the channel id (n). Macro STM32_DMA_IFCR(n) returns the interrupt flag clear register offset for the channel id (n). If chan->id % 4 = 2 or 3, then its flags are left-shifted by 16 bits. If chan->id % 4 = 1 or 3, then its flags are additionally left-shifted by 6 bits. If chan->id % 4 = 0, then its flags are not shifted. Macro STM32_DMA_FLAGS_SHIFT(n) returns the required shift to get or set the channel flags mask. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220829154646.29867-2-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: hisilicon: Dump regs to debugfsJie Hai1-2/+236
This patch adds dump of registers with debugfs for HIP08 and HIP09 DMA driver. Signed-off-by: Jie Hai <haijie1@huawei.com> Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Link: https://lore.kernel.org/r/20220830062251.52993-7-haijie1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: hisilicon: Adapt DMA driver to HiSilicon IP09Jie Hai1-82/+299
The HiSilicon IP08 and HiSilicon IP09 are DMA iEPs, they have the same pci device id but different pci revision. Unfortunately, they have different register layouts, so the origin driver cannot run on HiSilicon IP09 correctly. This patch enables the driver to adapt to HiSilicon IP09. HiSilicon IP09 offers 4 channels, each channel has a send queue, a complete queue and an interrupt to help to do tasks. This DMA engine can do memory copy between memory blocks. Signed-off-by: Jie Hai <haijie1@huawei.com> Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Link: https://lore.kernel.org/r/20220830062251.52993-6-haijie1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: hisilicon: Use macros instead of magic numberJie Hai1-6/+13
readl_relaxed_poll_timeout() uses magic numbers 10 and 1000, which indicate maximum time to sleep between reads in us and timeout in us, respectively. Use macros HISI_DMA_POLL_Q_STS_DELAY_US and HISI_DMA_POLL_Q_STS_TIME_OUT_US instead of these two numbers. Signed-off-by: Jie Hai <haijie1@huawei.com> Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Link: https://lore.kernel.org/r/20220830062251.52993-5-haijie1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: hisilicon: Add multi-thread support for a DMA channelJie Hai1-4/+2
When we get a DMA channel and try to use it in multiple threads it will cause oops and hanging the system. % echo 100 > /sys/module/dmatest/parameters/threads_per_chan % echo 100 > /sys/module/dmatest/parameters/iterations % echo 1 > /sys/module/dmatest/parameters/run [383493.327077] Unable to handle kernel paging request at virtual address dead000000000108 [383493.335103] Mem abort info: [383493.335103] ESR = 0x96000044 [383493.335105] EC = 0x25: DABT (current EL), IL = 32 bits [383493.335107] SET = 0, FnV = 0 [383493.335108] EA = 0, S1PTW = 0 [383493.335109] FSC = 0x04: level 0 translation fault [383493.335110] Data abort info: [383493.335111] ISV = 0, ISS = 0x00000044 [383493.364739] CM = 0, WnR = 1 [383493.367793] [dead000000000108] address between user and kernel address ranges [383493.375021] Internal error: Oops: 96000044 [#1] PREEMPT SMP [383493.437574] CPU: 63 PID: 27895 Comm: dma0chan0-copy2 Kdump: loaded Tainted: GO 5.17.0-rc4+ #2 [383493.457851] pstate: 204000c9 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [383493.465331] pc : vchan_tx_submit+0x64/0xa0 [383493.469957] lr : vchan_tx_submit+0x34/0xa0 This occurs because the transmission timed out, and that's due to data race. Each thread rewrite channels's descriptor as soon as device_issue_pending is called. It leads to the situation that the driver thinks that it uses the right descriptor in interrupt handler while channels's descriptor has been changed by other thread. The descriptor which in fact reported interrupt will not be handled any more, as well as its tx->callback. That's why timeout reports. With current fixes channels' descriptor changes it's value only when it has been used. A new descriptor is acquired from vc->desc_issued queue that is already filled with descriptors that are ready to be sent. Threads have no direct access to DMA channel descriptor. In case of channel's descriptor is busy, try to submit to HW again when a descriptor is completed. In this case, vc->desc_issued may be empty when hisi_dma_start_transfer is called, so delete error reporting on this. Now it is just possible to queue a descriptor for further processing. Fixes: e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support") Signed-off-by: Jie Hai <haijie1@huawei.com> Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Link: https://lore.kernel.org/r/20220830062251.52993-4-haijie1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: hisilicon: Fix CQ head updateJie Hai1-5/+3
After completion of data transfer of one or multiple descriptors, the completion status and the current head pointer to submission queue are written into the CQ and interrupt can be generated to inform the software. In interrupt process CQ is read and cq_head is updated. hisi_dma_irq updates cq_head only when the completion status is success. When an abnormal interrupt reports, cq_head will not update which will cause subsequent interrupt processes read the error CQ and never report the correct status. This patch updates cq_head whenever CQ is accessed. Fixes: e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support") Signed-off-by: Jie Hai <haijie1@huawei.com> Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Link: https://lore.kernel.org/r/20220830062251.52993-3-haijie1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: hisilicon: Disable channels when unregister hisi_dmaJie Hai1-5/+9
When hisi_dma is unloaded or unbinded, all of channels should be disabled. This patch disables DMA channels when driver is unloaded or unbinded. Fixes: e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support") Signed-off-by: Jie Hai <haijie1@huawei.com> Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Link: https://lore.kernel.org/r/20220830062251.52993-2-haijie1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: idxd: avoid deadlock in process_misc_interrupts()Jerry Snitselaar1-2/+0
idxd_device_clear_state() now grabs the idxd->dev_lock itself, so don't grab the lock prior to calling it. This was seen in testing after dmar fault occurred on system, resulting in lockup stack traces. Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Fixes: cf4ac3fef338 ("dmaengine: idxd: fix lockdep warning on device driver removal") Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20220823163709.2102468-1-jsnitsel@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: qcom: gpi: Add SM6350 supportLuca Weiss1-0/+1
The Qualcomm SM6350 platform does, like the SM8450, provide a set of GPI controllers with an ee-offset of 0x10000. Add this to the driver. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220812082721.1125759-3-luca.weiss@fairphone.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-08-05Merge tag 'pci-v5.20-changes' of ↵Linus Torvalds7-168/+158
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Consolidate duplicated 'next function' scanning and extend to allow 'isolated functions' on s390, similar to existing hypervisors (Niklas Schnelle) Resource management: - Implement pci_iobar_pfn() for sparc, which allows us to remove the sparc-specific pci_mmap_page_range() and pci_mmap_resource_range(). This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann) - Move common PCI definitions to asm-generic/pci.h and rework others to be be more specific and more encapsulated in arches that need them (Stafford Horne) Power management: - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas) Virtualization: - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi) Error handling: - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - When we have native control of AER, enable error reporting for all devices that support AER. Previously only a few drivers enabled this (Stefan Roese) - Keep AER error reporting enabled for switches. Previously we enabled this during enumeration but immediately disabled it (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) ASPM: - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g., via sysfs, are not lost across power state changes (Kai-Heng Feng) Endpoint framework: - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie) Endpoint embedded DMA controller driver: - Simplify and clean up support for the DesignWare embedded DMA (eDMA) controller (Frank Li, Serge Semin) Broadcom STB PCIe controller driver: - Avoid config space accesses when link is down because we can't recover from the CPU aborts these cause (Jim Quinlan) - Look for power regulators described under Root Ports in DT and enable them before scanning the secondary bus (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Simplify and clean up clock and PHY management (Richard Zhu) - Disable/enable regulators in suspend/resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) - Make link being down a non-fatal error so controller probe doesn't fail if there are no Endpoints connected (Richard Zhu) Loongson PCIe controller driver: - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) Marvell Aardvark PCIe controller driver: - Add support for AER and Slot capability on emulated bridge (Pali Rohár) MediaTek PCIe controller driver: - Add Airoha EN7532 to DT binding (John Crispin) - Allow building of driver for ARCH_AIROHA (Felix Fietkau) MediaTek PCIe Gen3 controller driver: - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) NVIDIA Tegra194 PCIe controller driver: - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Fix some Root Port interrupt handling issues (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix Data Link Feature capability programming (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) Qualcomm PCIe controller driver: - Rework clock, reset, PHY power-on ordering to avoid hangs and improve consistency (Robert Marko, Christian Marangi) - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) - Add support for more than 32 MSI interrupts (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver (Herve Codina) Samsung Exynos PCIe controller driver: - Fix phy-exynos-pcie driver so it follows the 'phy_init() before phy_power_on()' PHY programming model (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Simplify and clean up the DWC core extensively (Serge Semin) - Fix an issue with programming the ATU for regions that cross a 4GB boundary (Serge Semin) - Enable the CDM check if 'snps,enable-cdm-check' exists; previously we skipped it if 'num-lanes' was absent (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Add DWC core support for more than 32 MSI interrupts (Dmitry Baryshkov) Xilinx Versal CPM PCIe controller driver: - Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada)" * tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits) PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() ...
2022-08-05Merge tag 'dmaengine-6.0-rc1' of ↵Linus Torvalds32-216/+1035
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New support / Core: - Remove DMA_MEMCPY_SG for lack of users - Tegra 234 dmaengine support - Mediatek MT8365 dma support - Apple ADMAC driver Updates: - Yaml conversion for ST-Ericsson DMA40 binding and Freescale edma - rz-dmac updates and device_synchronize support - Bunch of typo in comments fixes in drivers - multithread support in sf-pdma driver" * tag 'dmaengine-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (50 commits) dmaengine: mediatek: mtk-hsdma: Fix typo 'the the' in comment dmaengine: axi-dmac: check cache coherency register dmaengine: sh: rz-dmac: Add device_synchronize callback dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failed dmaengine: tegra: Add terminate() for Tegra234 dt-bindings: dmaengine: Add compatible for Tegra234 dmaengine: xilinx: use strscpy to replace strlcpy dmaengine: imx-sdma: Add FIFO stride support for multi FIFO script dmaengine: idxd: Correct IAX operation code names dmaengine: imx-dma: Cast of_device_get_match_data() with (uintptr_t) dmaengine: dw-axi-dmac: ignore interrupt if no descriptor dmaengine: dw-axi-dmac: do not print NULL LLI during error dmaengine: altera-msgdma: Fixed some inconsistent function name descriptions dmaengine: imx-sdma: Add missing struct documentation dmaengine: sf-pdma: Add multithread support for a DMA channel dt-bindings: dma: dw-axi-dmac: extend the number of interrupts dmaengine: dmatest: use strscpy to replace strlcpy dmaengine: ste_dma40: fix typo in comment dmaengine: jz4780: fix typo in comment dmaengine: s3c24xx: fix typo in comment ...
2022-08-05Merge branch 'for-linus' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32 Pull AVR32 updates from Hans-Christian Noren Egtvedt: "Mostly changes to documentation and comments" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: video:backlight: remove reference to AVR32 architecture in ltv350qv video: remove support for non-existing atmel,at32ap-lcdc in atmel_lcdfb usb:udc: remove reference to AVR32 architecture in Atmel USBA Kconfig sound:spi: remove reference to AVR32 in Atmel AT73C213 DAC driver net: remove cdns,at32ap7000-macb device tree entry misc: update maintainer email address and description for atmel-ssc mfd: remove reference to AVR32 architecture in atmel-smc.c dma:dw: remove reference to AVR32 architecture in core.c
2022-08-04Merge tag 'spdx-6.0-rc1' of ↵Linus Torvalds10-61/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-08-03dma:dw: remove reference to AVR32 architecture in core.cHans-Christian Noren Egtvedt1-3/+0
The AVR32 architecture does no longer exist in the Linux kernel, hence remove a reference to it in comments to avoid confusion. Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
2022-07-26dmaengine: mediatek: mtk-hsdma: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220721055647.46085-1-slark_xiao@163.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-26dmaengine: axi-dmac: check cache coherency registerMathias Tausen1-0/+16
Marking the DMA as cache coherent (dma-coherent in devicetree) is only safe with versions of axi_dmac that have this feature enabled. Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Mathias Tausen <mta@satlab.com> Link: https://lore.kernel.org/r/20220726140213.786939-1-mta@satlab.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-26dmaengine: sh: rz-dmac: Add device_synchronize callbackBiju Das1-0/+17
Some on-chip peripheral modules(for eg:- rspi) on RZ/G2L SoC use the same signal for both interrupt and DMA transfer requests. The signal works as a DMA transfer request signal by setting DMARS, and subsequent interrupt requests to the interrupt controller are masked. We can re-enable the interrupt by clearing the DMARS. This patch adds device_synchronize callback for clearing DMARS and thereby allowing DMA consumers to switch to interrupt mode. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220722084430.969333-1-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-26dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failedUwe Kleine-König1-4/+1
It's not allowed to quit remove early without cleaning up completely. Otherwise this results in resource leaks that probably yield graver problems later. Here for example some tasklets might survive the lifetime of the sprd-dma device and access sdev which is freed after .remove() returns. As none of the device freeing requires an active device, just ignore the return value of pm_runtime_get_sync(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/20220721204054.323602-1-u.kleine-koenig@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-26dmaengine: tegra: Add terminate() for Tegra234Akhil R1-2/+24
In certain cases where the DMA client bus gets corrupted or if the end device ceases to send/receive data, DMA can wait indefinitely for the data to be received/sent. Attempting to terminate the transfer will put the DMA in pause flush mode and it remains there. The channel is irrecoverable once this pause times out in Tegra194 and earlier chips. Whereas, from Tegra234, it can be recovered by disabling the channel and reprograming it. Hence add a new terminate() function that ignores the outcome of dma_pause() so that terminate_all() can proceed to disable the channel. Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20220720104045.16099-3-akhilrajeev@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-21dmaengine: xilinx: use strscpy to replace strlcpyXueBing Chen1-1/+1
The strlcpy should not be used because it doesn't limit the source length. Preferred is strscpy. Signed-off-by: XueBing Chen <chenxuebing@jari.cn> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/39aa840f.e31.181ed9461c2.Coremail.chenxuebing@jari.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-21dmaengine: imx-sdma: Add FIFO stride support for multi FIFO scriptShengjiu Wang1-2/+25
The peripheral may have several FIFOs, but some case just select some FIFOs from them for data transfer, which means FIFO0 and FIFO2 may be selected. So add FIFO address stride support, 0 means all FIFOs are continuous, 1 means 1 word stride between FIFOs. All stride between FIFOs should be same. Another option words_per_fifo means how many audio channel data copied to one FIFO one time, 1 means one channel per FIFO, 2 means 2 channels per FIFO. If 'n_fifos_src = 4' and 'words_per_fifo = 2', it means the first two words(channels) fetch from FIFO0 and then jump to FIFO1 for next two words, and so on after the last FIFO3 fetched, roll back to FIFO0. Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1657162829-9273-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-21dmaengine: imx-dma: Cast of_device_get_match_data() with (uintptr_t)Fabio Estevam1-1/+1
Change the of_device_get_match_data() cast to (uintptr_t) to silence the following clang warning: drivers/dma/imx-dma.c:1048:20: warning: cast to smaller integer type 'enum imx_dma_type' from 'const void *' [-Wvoid-pointer-to-enum-cast] Reported-by: kernel test robot <lkp@intel.com> Fixes: 0ab785c894e6 ("dmaengine: imx-dma: Remove unused .id_table") Signed-off-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20220706111327.940764-1-festevam@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-21dmaengine: dw-axi-dmac: ignore interrupt if no descriptorBen Dooks1-0/+6
If the channel has no descriptor and the interrupt is raised then the kernel will OOPS. Check the result of vchan_next_desc() in the handler axi_chan_block_xfer_complete() to avoid the error happening. Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Link: https://lore.kernel.org/r/20220708170153.269991-4-ben.dooks@sifive.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-21dmaengine: dw-axi-dmac: do not print NULL LLI during errorBen Dooks1-0/+5
During debugging we have seen an issue where axi_chan_dump_lli() is passed a NULL LLI pointer which ends up causing an OOPS due to trying to get fields from it. Simply print NULL LLI and exit to avoid this. Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Link: https://lore.kernel.org/r/20220708170153.269991-3-ben.dooks@sifive.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-06dmaengine: altera-msgdma: Fixed some inconsistent function name descriptionsJiapeng Chong1-2/+2
Inconsistent function names describing msgdma_chan_remove() and msgdma_dma_remove are modified to msgdma_dev_remove() and msgdma_remove(). Remove some warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/dma/altera-msgdma.c:927: warning: expecting prototype for msgdma_dma_remove(). Prototype was for msgdma_remove() instead. drivers/dma/altera-msgdma.c:758: warning: expecting prototype for msgdma_chan_remove(). Prototype was for msgdma_dev_remove() instead. Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Stefan Roese <sr@denx.de> Link: https://lore.kernel.org/r/20220706082605.114907-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-06dmaengine: imx-sdma: Add missing struct documentationShengjiu Wang1-1/+6
Fix compile warning that 'Function parameter or member not described' with 'W=1' option: Add missing description for struct sdma_desc There is not any description for struct sdma_script_start_addrs, so use /* instead of /** Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1657086309-7964-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-06dmaengine: sf-pdma: Add multithread support for a DMA channelViacheslav Mitrofanov1-14/+30
When we get a DMA channel and try to use it in multiple threads it will cause oops and hanging the system. % echo 64 > /sys/module/dmatest/parameters/threads_per_chan % echo 10000 > /sys/module/dmatest/parameters/iterations % echo 1 > /sys/module/dmatest/parameters/run [ 89.480664] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 89.488725] Oops [#1] [ 89.494708] CPU: 2 PID: 1008 Comm: dma0chan0-copy0 Not tainted 5.17.0-rc5 [ 89.509385] epc : vchan_find_desc+0x32/0x46 [ 89.513553] ra : sf_pdma_tx_status+0xca/0xd6 This happens because of data race. Each thread rewrite channels's descriptor as soon as device_prep_dma_memcpy() is called. It leads to the situation when the driver thinks that it uses right descriptor that actually is freed or substituted for other one. With current fixes a descriptor changes its value only when it has been used. A new descriptor is acquired from vc->desc_issued queue that is already filled with descriptors that are ready to be sent. Threads have no direct access to DMA channel descriptor. Now it is just possible to queue a descriptor for further processing. Fixes: 6973886ad58e ("dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00") Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Link: https://lore.kernel.org/r/20220701082942.12835-1-v.v.mitrofanov@yadro.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-06dmaengine: dmatest: use strscpy to replace strlcpyXueBing Chen1-6/+6
The strlcpy should not be used because it doesn't limit the source length. Preferred is strscpy. Signed-off-by: XueBing Chen <chenxuebing@jari.cn> Link: https://lore.kernel.org/r/12e4cf06.a35.180fa748c29.Coremail.chenxuebing@jari.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 15:05:18 +0300