summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)AuthorFilesLines
2019-08-09omap-dma/omap_vout_vrfb: fix off-by-one fi valueHans Verkuil1-2/+2
The OMAP 4 TRM specifies that when using double-index addressing the address increases by the ES plus the EI value minus 1 within a frame. When a full frame is transferred, the address increases by the ES plus the frame index (FI) value minus 1. The omap-dma code didn't account for the 'minus 1' in the FI register. To get correct addressing, add 1 to the src_icg value. This was found when testing a hacked version of the media m2m-deinterlace.c driver on a Pandaboard. The only other source that uses this feature is omap_vout_vrfb.c, and that adds a + 1 when setting the dst_icg. This is a workaround for the broken omap-dma.c behavior. So remove the workaround at the same time that we fix omap-dma.c. I tested the omap_vout driver with a Beagle XM board to check that the '+ 1' in omap_vout_vrfb.c was indeed a workaround for the omap-dma bug. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Link: https://lore.kernel.org/r/952e7f51-f208-9333-6f58-b7ed20d2ea0b@xs4all.nl Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-08dmaengine: stm32-mdma: Fix a possible null-pointer dereference in ↵Jia-Ju Bai1-1/+1
stm32_mdma_irq_handler() In stm32_mdma_irq_handler(), chan is checked on line 1368. When chan is NULL, it is still used on line 1369: dev_err(chan2dev(chan), "MDMA channel not initialized\n"); Thus, a possible null-pointer dereference may occur. To fix this bug, "dev_dbg(mdma2dev(dmadev), ...)" is used instead. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver") Link: https://lore.kernel.org/r/20190729020849.17971-1-baijiaju1990@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-25dmaengine: tegra210-adma: Fix unused function warningsYueHaibing1-2/+2
If CONFIG_PM is not set, build warnings: drivers/dma/tegra210-adma.c:747:12: warning: tegra_adma_runtime_resume defined but not used [-Wunused-function] static int tegra_adma_runtime_resume(struct device *dev) drivers/dma/tegra210-adma.c:715:12: warning: tegra_adma_runtime_suspend defined but not used [-Wunused-function] static int tegra_adma_runtime_suspend(struct device *dev) Mark the two function as __maybe_unused. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Fixes: 3145d73e69ba ("dmaengine: tegra210-adma: remove PM_CLK dependency") Fixes: f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA") Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20190709083258.57112-1-yuehaibing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-22dmaengine: ste_dma40: fix unneeded variable warningArnd Bergmann1-2/+2
clang-9 points out that there are two variables that depending on the configuration may only be used in an ARRAY_SIZE() expression but not referenced: drivers/dma/ste_dma40.c:145:12: error: variable 'd40_backup_regs' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] static u32 d40_backup_regs[] = { ^ drivers/dma/ste_dma40.c:214:12: error: variable 'd40_backup_regs_chan' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] static u32 d40_backup_regs_chan[] = { Mark these __maybe_unused to shut up the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190712091357.744515-1-arnd@arndb.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-22dmaengine: dw-edma: fix endianess confusionArnd Bergmann1-14/+10
When building with 'make C=1', sparse reports an endianess bug: drivers/dma/dw-edma/dw-edma-v0-debugfs.c:60:30: warning: cast removes address space of expression drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: warning: incorrect type in argument 1 (different address spaces) drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: expected void const volatile [noderef] <asn:2>*addr drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: got void *[assigned] ptr drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: warning: incorrect type in argument 1 (different address spaces) drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: expected void const volatile [noderef] <asn:2>*addr drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: got void *[assigned] ptr drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: warning: incorrect type in argument 1 (different address spaces) drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: expected void const volatile [noderef] <asn:2>*addr drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: got void *[assigned] ptr The current code is clearly wrong, as it passes an endian-swapped word into a register function where it gets swapped again. Just pass the variables directly into lower_32_bits()/upper_32_bits(). Fixes: 7e4b8a4fbe2c ("dmaengine: Add Synopsys eDMA IP version 0 support") Link: https://lore.kernel.org/lkml/20190617131820.2470686-1-arnd@arndb.de/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/20190722124457.1093886-3-arnd@arndb.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-22dmaengine: dw-edma: fix __iomem type confusionArnd Bergmann4-28/+29
The new driver mixes up dma_addr_t and __iomem pointers, which results in warnings on some 32-bit architectures, like: drivers/dma/dw-edma/dw-edma-v0-core.c: In function '__dw_regs': drivers/dma/dw-edma/dw-edma-v0-core.c:28:9: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] return (struct dw_edma_v0_regs __iomem *)dw->rg_region.vaddr; Make it use __iomem pointers consistently here, and avoid using dma_addr_t for __iomem tokens altogether. A small complication here is the debugfs code, which passes an __iomem token as the private data for debugfs files, requiring the use of extra __force. Fixes: 7e4b8a4fbe2c ("dmaengine: Add Synopsys eDMA IP version 0 support") Link: https://lore.kernel.org/lkml/20190617131918.2518727-1-arnd@arndb.de/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190722124457.1093886-2-arnd@arndb.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-22dmaengine: dw-edma: fix unnecessary stack usageArnd Bergmann1-1/+1
Putting large constant data on the stack causes unnecessary overhead and stack usage: drivers/dma/dw-edma/dw-edma-v0-debugfs.c:285:6: error: stack frame size of 1376 bytes in function 'dw_edma_v0_debugfs_on' [-Werror,-Wframe-larger-than=] Mark the variable 'static const' in order for the compiler to move it into the .rodata section where it does no such harm. Fixes: 305aebeff879 ("dmaengine: Add Synopsys eDMA IP version 0 debugfs support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/20190722124457.1093886-1-arnd@arndb.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-17Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds51-691/+3468
Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...
2019-07-14Merge tag 'mtd/for-5.3' of ↵Linus Torvalds1-11/+14
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ...
2019-07-08dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"Vinod Koul3-87/+1
This reverts commit 7144afd025b2 ("dmaengine: fsl-edma: add i.mx7ulp edma2 version support") as this fails to build with module option due to usage of of_irq_count() which is not an exported symbol as kernel drivers are *not* expected to use it (rightly so). Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-07dmaengine: at_xdmac: check for non-empty xfers_list before invoking callbackRaag Jadav1-4/+7
tx descriptor retrieved from an empty xfers_list may not have valid pointers to the callback functions. Avoid calling dmaengine_desc_get_callback_invoke if xfers_list is empty. Signed-off-by: Raag Jadav <raagjadav@gmail.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-06Merge tag 'dmaengine-fix-5.2' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds3-25/+35
Pull dmaengine fixes from Vinod Koul: - bam_dma fix for completed descriptor count - fix for imx-sdma remove BD_INTR for channel0 and use-after-free on probe error path - endian bug fix in jz4780 IRQ handler * tag 'dmaengine-fix-5.2' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: qcom: bam_dma: Fix completed descriptors count dmaengine: imx-sdma: remove BD_INTR for channel0 dmaengine: imx-sdma: fix use-after-free on probe error path dmaengine: jz4780: Fix an endian bug in IRQ handler
2019-07-05dmaengine: qcom: bam_dma: Fix completed descriptors countSricharan R1-0/+3
One space is left unused in circular FIFO to differentiate 'full' and 'empty' cases. So take that in to account while counting for the descriptors completed. Fixes the issue reported here, https://lkml.org/lkml/2019/6/18/669 Cc: stable@vger.kernel.org Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-05dmaengine: imx-sdma: remove BD_INTR for channel0Robin Gong1-2/+2
It is possible for an irq triggered by channel0 to be received later after clks are disabled once firmware loaded during sdma probe. If that happens then clearing them by writing to SDMA_H_INTR won't work and the kernel will hang processing infinite interrupts. Actually, don't need interrupt triggered on channel0 since it's pollling SDMA_H_STATSTOP to know channel0 done rather than interrupt in current code, just clear BD_INTR to disable channel0 interrupt to avoid the above case. This issue was brought by commit 1d069bfa3c78 ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler") which didn't take care the above case. Fixes: 1d069bfa3c78 ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler") Cc: stable@vger.kernel.org #5.0+ Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reported-by: Sven Van Asbroeck <thesven73@gmail.com> Tested-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-05dmaengine: imx-sdma: fix use-after-free on probe error pathSven Van Asbroeck1-21/+27
If probe() fails anywhere beyond the point where sdma_get_firmware() is called, then a kernel oops may occur. Problematic sequence of events: 1. probe() calls sdma_get_firmware(), which schedules the firmware callback to run when firmware becomes available, using the sdma instance structure as the context 2. probe() encounters an error, which deallocates the sdma instance structure 3. firmware becomes available, firmware callback is called with deallocated sdma instance structure 4. use after free - kernel oops ! Solution: only attempt to load firmware when we're certain that probe() will succeed. This guarantees that the firmware callback's context will remain valid. Note that the remove() path is unaffected by this issue: the firmware loader will increment the driver module's use count, ensuring that the module cannot be unloaded while the firmware callback is pending or running. Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by: Robin Gong <yibin.gong@nxp.com> [vkoul: fixed braces for if condition] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-05dmaengine: jz4780: Fix an endian bug in IRQ handlerDan Carpenter1-2/+3
The "pending" variable was a u32 but we cast it to an unsigned long pointer when we do the for_each_set_bit() loop. The problem is that on big endian 64bit systems that results in an out of bounds read. Fixes: 4e4106f5e942 ("dmaengine: jz4780: Fix transfers being ACKed too soon") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-05dmaengine: tegra210-adma: remove PM_CLK dependencySameer Pujar1-1/+1
Tegra ADMA does not use pm-clk interface now and hence the dependency is removed from Kconfig. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-03dmaengine: fsl-edma: add i.mx7ulp edma2 version supportRobin Gong3-1/+87
Add edma2 for i.mx7ulp by version v3, since v2 has already been used by mcf-edma. The big changes based on v1 are belows: 1. only one dmamux. 2. another clock dma_clk except dmamux clk. 3. 16 independent interrupts instead of only one interrupt for all channels. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-03dmaengine: fsl-edma-common: version check for v2 insteadRobin Gong1-20/+20
The next v3 i.mx7ulp edma is based on v1, so change version check logic for v2 instead. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-03dmaengine: fsl-edma-common: move dmamux register to another single functionRobin Gong1-4/+14
Prepare for edmav2 on i.mx7ulp whose dmamux register is 32bit. No function impacted. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-03dmaengine: fsl-edma: add drvdata for fsl-edmaRobin Gong4-31/+62
There are some differences between vf610 and next i.mx7ulp. Put such differences into static driver data for distinguishing easily at driver level. Change mcf-edma accordingly. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-03dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"Fabio Estevam1-5/+0
This reverts commit 002905eca5bedab08bafd9e325bbbb41670c7712. Commit 002905eca5be ("dmaengine: fsl-edma: support little endian for edma driver") incorrectly assumed that there was not little endian support in the driver. This causes hangs on Vybrid, so revert it so that Vybrid systems could boot again. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-27mtd: rawnand: gpmi: Implement exec_opSascha Hauer1-0/+3
The gpmi driver performance suffers from NAND operations being split in multiple small DMA transfers. This has been forced by the NAND layer in the former days, but now with exec_op we can use the controller as intended. With this patch gpmi_nfc_exec_op becomes the main entry point to NAND operations. Here all instructions are collected and chained as separate DMA transfers. In the end whole chain is fired and waited to be finished. gpmi_nfc_exec_op only does the hardware operations, bad block marker swapping and buffer scrambling is done by the callers. It's worth noting that the nand_*_op functions always take the buffer lengths for the data that the NAND chip actually transfers. When doing BCH we have to calculate the net data size from the raw data size in some places. This patch has been tested with 2048/64 and 2048/128 byte NAND on i.MX6q. mtd_oobtest, mtd_subpagetest and mtd_speedtest run without errors. nandbiterrs, nandpagetest and nandsubpagetest userspace tests from mtdutils run without errors and UBIFS can successfully be mounted. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dmaengine: mxs: rename custom flagSascha Hauer1-2/+2
The mxs dma driver uses the flags parameter in dmaengine_prep_slave_sg() for custom flags, but still uses the dmaengine specific names of the flags. Do a little bit better and at least give the flag a custom name. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dmaengine: mxs: Add header file to be shared with gpmi nand driverSascha Hauer1-0/+1
The mxs dma driver can do PIO transfers. A pointer to the PIO words to transfer is passed in the struct scatterlist * argument of dmaengine_prep_slave_sg(). It's quite ugly and non obvious to cast u32 * to struct scatterlist * each time when calling dmaengine_prep_slave_sg(), so add a static inline wrapper function to be called by the user along with a description what is going on. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dmaengine: mxs: Drop unnecessary flagSascha Hauer1-9/+8
The mxs dma driver insists on having the DMA_PREP_INTERRUPT flag set on all but the first transfer. There's no need to let the user set this flag, the driver can do it internally whenever it needs it. Drop handling of this flag from the driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-25dmaengine: rcar-dmac: Reject zero-length slave DMA requestsGeert Uytterhoeven1-1/+1
While the .device_prep_slave_sg() callback rejects empty scatterlists, it still accepts single-entry scatterlists with a zero-length segment. These may happen if a driver calls dmaengine_prep_slave_single() with a zero len parameter. The corresponding DMA request will never complete, leading to messages like: rcar-dmac e7300000.dma-controller: Channel Address Error happen and DMA timeouts. Although requesting a zero-length DMA request is a driver bug, rejecting it early eases debugging. Note that the .device_prep_dma_memcpy() callback already rejects requests to copy zero bytes. Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> Analyzed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart LakeAndy Shevchenko1-0/+5
Intel Elkhart Lake OSE (Offload Service Engine) provides few DMA controllers to the host. Enable them in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: dw-edma: fix semicolon.cocci warningskbuild test robot1-1/+1
drivers/dma/dw-edma/dw-edma-core.c:617:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver") CC: Gustavo Pimentel <Gustavo.Pimentel@synopsys.com> Signed-off-by: kbuild test robot <lkp@intel.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: sh: usb-dmac: Use [] to denote a flexible array memberGeert Uytterhoeven1-1/+1
Flexible array members should be denoted using [] instead of [0], else gcc will not warn when they are no longer at the end of the structure. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: dmatest: timeout value of -1 should specify infinite waitHook, Gary1-3/+3
The dmatest module parameter 'timeout' is documented as accepting a -1 to mean "infinite timeout". However, an infinite timeout is not advised, nor possible since the module parameter is an unsigned int, which won't accept a negative value. Change the parameter comment to reflect current behavior, which allows values from 0 up to 4294967295 (0xFFFFFFFF). Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bitAndy Shevchenko1-8/+20
In the same way as done for ->probe(), call ->remove() based on the type of the hardware. While it works now due to equivalency of the two removal functions, it might be changed in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: fsl-edma: support little endian for edma driverPeng Ma1-0/+5
Our platforms with below registers(CHCFG0 - CHCFG15) of eDMA *-----------------------------------------------------------* | Offset | Big endian Register| Little endian Register| |--------------|--------------------|-----------------------| | 0x0 | CHCFG0 | CHCFG3 | |--------------|--------------------|-----------------------| | 0x1 | CHCFG1 | CHCFG2 | |--------------|--------------------|-----------------------| | 0x2 | CHCFG2 | CHCFG1 | |--------------|--------------------|-----------------------| | 0x3 | CHCFG3 | CHCFG0 | |--------------|--------------------|-----------------------| | ... | ...... | ...... | |--------------|--------------------|-----------------------| | 0xC | CHCFG12 | CHCFG15 | |--------------|--------------------|-----------------------| | 0xD | CHCFG13 | CHCFG14 | |--------------|--------------------|-----------------------| | 0xE | CHCFG14 | CHCFG13 | |--------------|--------------------|-----------------------| | 0xF | CHCFG15 | CHCFG12 | *-----------------------------------------------------------* Current eDMA driver does not support Little endian, so this patch is to improve edma driver to support little endian. Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"Andy Shevchenko1-2/+2
The commit 080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width") has been mistakenly submitted. The further investigations show that the original code does better job since the memory side transfer size has never been configured by DMA users. As per latest revision of documentation: "Channel minimum transfer size (CHnMTSR)... For IOSF UART, maximum value that can be programmed is 64 and minimum value that can be programmed is 1." This reverts commit 080edf75d337d35faa6fc3df99342b10d2848d16. Fixes: 080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner29-121/+29
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-14dmagengine: pl330: add code to get reset propertyDinh Nguyen1-0/+40
The DMA controller on some SoCs can be held in reset, and thus requires the reset signal(s) to deasserted. Most SoCs will have just one reset signal, but there are others, i.e. Arria10/Stratix10 will have an additional reset signal, referred to as the OCP. Add code to get the reset property from the device tree for deassert and assert. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-14dmaengine: axi-dmac: add regmap supportAlexandru Ardelean2-0/+42
The registers for AXI DMAC are detailed at: https://wiki.analog.com/resources/fpga/docs/axi_dmac#register_map This change adds regmap support for these registers, in case some wants to have a more direct access to them via this interface. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> [vkoul: fixed code style issue] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-14dmaengine: axi-dmac: terminate early DMA transfers after a partial oneAlexandru Ardelean1-1/+4
When a partial transfer is received, the driver should not submit any more segments to the hardware, as they will be ignored/unused until a new transfer start operation is done. This change implements this by adding a new flag on the AXI DMAC descriptor. This flags is set to true, if there was a partial transfer in a previously completed segment. When that flag is true, the TLAST flag is added to the to the submitted segment, signaling the controller to stop receiving more segments. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-14dmaengine: axi-dmac: populate residue info for completed xfersAlexandru Ardelean1-1/+98
Starting with version 4.2.a, the AXI DMAC controller can report partial transfers that have been issued. This change implements computing DMA residue information for transfers, based on that reported information. The way this is done, is to dequeue the partial transfers from the FIFO of partial transfers, store the partial length to the correct segment & descriptor, and compute the residue before submitting the DMA cookie to the DMA framework. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-14dmaengine: virt-dma: store result on dma descriptorAlexandru Ardelean2-2/+6
This allows each virtual channel to store information about each transfer that completed, i.e. which transfer succeeded (or which failed) and if there was any residue data on each (completed) transfer. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-14dmaengine: qcom: hidma: no need to check return value of debugfs_create ↵Greg Kroah-Hartman2-34/+8
functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, because there is no need to save the file dentry, remove the variables that were saving them as they were never even being used once set. Cc: Sinan Kaya <okaya@kernel.org> Cc: Andy Gross <agross@kernel.org> Cc: David Brown <david.brown@linaro.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-14dmaengine: mic_x100_dma: no need to check return value of debugfs_create ↵Greg Kroah-Hartman1-4/+2
functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-14dmaengine: pxa_dma: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-45/+11
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, because there is no need to save the file dentry, remove the variable that was saving it as it was never even being used once set. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-14dmaengine: coh901318: no need to cast away call to debugfs_create_file()Greg Kroah-Hartman1-4/+2
No need to check the return value of debugfs_create_file(), so no need to provide a fake "cast away" of the return value either. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-14dmaengine: bcm-sba-raid: no need to check return value of debugfs_create ↵Greg Kroah-Hartman1-10/+3
functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, because there is no need to save the file dentry, remove the variable that was saving it as it was never even being used once set. Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-14dmaengine: amba-pl08x: no need to cast away call to debugfs_create_file()Greg Kroah-Hartman1-3/+2
No need to check the return value of debugfs_create_file(), so no need to provide a fake "cast away" of the return value either. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-12dmaengine: dw-edma: Fix build error without CONFIG_PCI_MSIYueHaibing1-0/+1
If CONFIG_PCI_MSI is not set, building with CONFIG_DW_EDMA fails: drivers/dma/dw-edma/dw-edma-core.c: In function dw_edma_irq_request: drivers/dma/dw-edma/dw-edma-core.c:784:21: error: implicit declaration of function pci_irq_vector; did you mean rcu_irq_enter? [-Werror=implicit-function-declaration] err = request_irq(pci_irq_vector(to_pci_dev(dev), 0), ^~~~~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-10dmaengine: Grammar s/the its/its/, s/need/needs/Geert Uytterhoeven1-2/+2
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-10dmaengine: axi-dmac: update license headerAlexandru Ardelean1-3/+2
The change replaces the old license information in the comment header with the new SPDX license specifier. As well as bumping the year range from 2013-2015 to 2013-2019. The latter also reflects recent changes that were added to the driver. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 23:55:31 +0300