| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- Apple admac t8112 device support
- StarFive JH7110 DMA controller
Updates:
- Big pile of idxd updates to support IAA 2.0 device capabilities,
DSA 2.0 Event Log and completion record faulting features and
new DSA operations
- at_xdmac supend & resume updates and driver code cleanup
- k3-udma supend & resume support
- k3-psil thread support for J784s4"
* tag 'dmaengine-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (57 commits)
dmaengine: idxd: add per wq PRS disable
dmaengine: idxd: add pid to exported sysfs attribute for opened file
dmaengine: idxd: expose fault counters to sysfs
dmaengine: idxd: add a device to represent the file opened
dmaengine: idxd: add per file user counters for completion record faults
dmaengine: idxd: process batch descriptor completion record faults
dmaengine: idxd: add descs_completed field for completion record
dmaengine: idxd: process user page faults for completion record
dmaengine: idxd: add idxd_copy_cr() to copy user completion record during page fault handling
dmaengine: idxd: create kmem cache for event log fault items
dmaengine: idxd: add per DSA wq workqueue for processing cr faults
dmanegine: idxd: add debugfs for event log dump
dmaengine: idxd: add interrupt handling for event log
dmaengine: idxd: setup event log configuration
dmaengine: idxd: add event log size sysfs attribute
dmaengine: idxd: make misc interrupt one shot
dt-bindings: dma: snps,dw-axi-dmac: constrain the items of resets for JH7110 dma
dt-bindings: dma: Drop unneeded quotes
dmaengine: at_xdmac: align declaration of ret with the rest of variables
dmaengine: at_xdmac: add a warning message regarding for unpaused channels
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
|
|
'arm/omap', 'arm/renesas', 'arm/rockchip', 'arm/smmu', 'ppc/pamu', 'unisoc', 'x86/vt-d', 'x86/amd', 'core' and 'platform-remove_new' into next
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: dmaengine@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The iommu subsystem requires IOMMU_DEV_FEAT_IOPF must be enabled before
and disabled after IOMMU_DEV_FEAT_SVA, if device's I/O page faults rely
on the IOMMU. Add explicit IOMMU_DEV_FEAT_IOPF enabling/disabling in this
driver.
At present, missing IOPF enabling/disabling doesn't cause any real issue,
because the IOMMU driver places the IOPF enabling/disabling in the path
of SVA feature handling. But this may change.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230324120234.313643-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add sysfs knob for per wq Page Request Service disable. This knob
disables PRS support for the specific wq. When this bit is set,
it also overrides the wq's block on fault enabling.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-17-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Provide the pid of the application for the opened file. This allows the
monitor daemon to easily correlate which app opened the file and easily
kill the app by pid if that is desired action.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-16-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Expose cr_faults and cr_fault_failures counters to the user space. This
allows a user app to keep track of how many fault the application is
causing with the completion record (CR) and also the number of failures
of the CR writeback. Having a high number of cr_fault_failures is bad as
the app is submitting descriptors with the CR addresses that are bad. User
monitoring daemon may want to consider killing the application as it may be
malicious and attempting to flood the device event log.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-15-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Embed a struct device for the user file context in order to export sysfs
attributes related with the opened file. Tie the lifetime of the file
context to the device. The sysfs entry will be added under the char device.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-14-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add counters per opened file for the char device in order to keep track how
many completion record faults occurred and how many of those faults failed
the writeback by the driver after attempt to fault in the page. The
counters are managed by xarray that associates the PASID with
struct idxd_user_context.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-13-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add event log processing for faulting of user batch descriptor completion
record.
When encountering an event log entry for a page fault on a completion
record, the driver is expected to do the following:
1. If the "first error in batch" bit in event log entry error info is
set, discard any previously recorded errors associated with the
"batch identifier".
2. Fix the page fault according to the fault address in the event log. If
successful, write the completion record to the fault address in user space.
3. If an error is encountered while writing the completion record and it is
associated to a descriptor in the batch, the driver associates the error
with the batch identifier of the event log entry and tracks it until the
event log entry for the corresponding batch desc is encountered.
While processing an event log entry for a batch descriptor with error
indicating that one or more descs in the batch had event log entries,
the driver will do the following before writing the batch completion
record:
1. If the status field of the completion record is 0x1, the driver will
change it to error code 0x5 (one or more operations in batch completed
with status not successful) and changes the result field to 1.
2. If the status is error code 0x6 (page fault on batch descriptor list
address), change the result field to 1.
3. If status is any other value, the completion record is not changed.
4. Clear the recorded error in preparation for next batch with same batch
identifier.
The result field is for user software to determine whether to set the
"Batch Error" flag bit in the descriptor for continuation of partial
batch descriptor completion. See DSA spec 2.0 for additional information.
If no error has been recorded for the batch, the batch completion record is
written to user space as is.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-12-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
DSA supports page fault handling through PRS. However, the DMA engine
that's processing the descriptor is blocked until the PRS response is
received. Other workqueues sharing the engine are also blocked.
Page fault handing by the driver with PRS disabled can be used to
mitigate the stalling.
With PRS disabled while ATS remain enabled, DSA handles page faults on
a completion record by reporting an event in the event log. In this
instance, the descriptor is completed and the event log contains the
completion record address and the contents of the completion record. Add
support to the event log handling code to fault in the completion record
and copy the content of the completion record to user memory.
A bitmap is introduced to keep track of discarded event log entries. When
the user process initiates ->release() of the char device, it no longer is
interested in any remaining event log entries tied to the relevant wq and
PASID. The driver will mark the event log entry index in the bitmap. Upon
encountering the entries during processing, the event log handler will just
clear the bitmap bit and skip the entry rather than attempt to process the
event log entry.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-10-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
page fault handling
Define idxd_copy_cr() to copy completion record to fault address in
user address that is found by work queue (wq) and PASID.
It will be used to write the user's completion record that the hardware
device is not able to write due to user completion record page fault.
An xarray is added to associate the PASID and mm with the
struct idxd_user_context so mm can be found by PASID and wq.
It is called when handling the completion record fault in a kernel thread
context. Switch to the mm using kthread_use_vm() and copy the
completion record to the mm via copy_to_user(). Once the copy is
completed, switch back to the current mm using kthread_unuse_mm().
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-9-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a kmem cache per device for allocating event log fault context. The
context allows an event log entry to be copied and passed to a software
workqueue to be processed. Due to each device can have different sized
event log entry depending on device type, it's not possible to have a
global kmem cache.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-8-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a workqueue for user submitted completion record fault processing.
The workqueue creation and destruction lifetime will be tied to the user
sub-driver since it will only be used when the wq is a user type.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-7-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add debugfs entry to dump the content of the event log for debugging. The
function will dump all non-zero entries in the event log. It will note
which entries are processed and which entries are still pending processing
at the time of the dump. The entries may not always be in chronological
order due to the log is a circular buffer.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-6-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
An event log interrupt is raised in the misc interrupt INTCAUSE register
when an event is written by the hardware. Add basic event log processing
support to the interrupt handler. The event log is a ring where the
hardware owns the tail and the software owns the head. The hardware will
advance the tail index when an additional event has been pushed to memory.
The software will process the log entry and then advances the head. The
log is full when (tail + 1) % log_size = head. The hardware will stop
writing when the log is full. The user is expected to create a log size
large enough to handle all the expected events.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-5-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add setup of event log feature for supported device. Event log addresses
error reporting that was lacking in gen 1 DSA devices where a second error
event does not get reported when a first event is pending software
handling. The event log allows a circular buffer that the device can push
error events to. It is up to the user to create a large enough event log
ring in order to capture the expected events. The evl size can be set in
the device sysfs attribute. By default 64 entries are supported as minimal
when event log is enabled.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-4-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for changing of the event log size. Event log is a
feature added to DSA 2.0 hardware to improve error reporting.
It supersedes the SWERROR register on DSA 1.0 hardware and hope
to prevent loss of reported errors.
The error log size determines how many error entries supported for
the device. It can be configured by the user via sysfs attribute.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-3-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Current code continuously processes the interrupt as long as the hardware
is setting the status bit. There's no reason to do that since the threaded
handler will get called again if another interrupt is asserted.
Also through testing, it has shown that if a misprogrammed (or malicious)
agent can continuously submit descriptors with bad completion record and
causes errors to be reported via the misc interrupt. Continuous processing
by the thread can cause software hang watchdog to kick off since the thread
isn't giving up the CPU.
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-2-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Align the declaration of ret in atmel_xdmac_resume() with the rest of
variables. Do this by adding ret to the line with declaration for i
variable.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-8-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a warning message on suspend to let the user that there are channels
not paused by their consumers.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-7-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Do not global enable all the cyclic channels in at_xdmac_resume(). Instead
save the global status in at_xdmac_suspend() and re-enable the cyclic
channel only if it was active before suspend.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-6-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In case the system suspends to a deep sleep state where power to DMA
controller is cut-off we need to restore the content of GRWS register.
This is a write only register and writing bit X tells the controller
to suspend read and write requests for channel X. Thus set GRWS before
restoring the content of GE (Global Enable) regiter.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-5-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In case there are DMA channels not paused by consumers in suspend
process (valid on AT91 SoCs for serial driver when no_console_suspend) the
driver pauses them (using at_xdmac_device_pause() which is also the same
function called by dmaengine_pause()) and then in the resume process the
driver resumes them calling at_xdmac_device_resume() which is the same
function called by dmaengine_resume()). This is good for DMA channels
not paused by consumers but for drivers that calls
dmaengine_pause()/dmaegine_resume() on suspend/resume path this may lead to
DMA channel being enabled before the IP is enabled. For IPs that needs
strict ordering with regards to DMA channel enablement this will lead to
wrong behavior. To fix this add a new set of functions
at_xdmac_device_pause_internal()/at_xdmac_device_resume_internal() to be
called only on suspend/resume.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-4-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In case there are channels not paused during suspend (which on AT91 case
is valid for serial driver when no_console_suspend boot argument is used)
the at_xdmac_runtime_suspend_descriptors() was called more than
one time due to at_xdmac_off(). To fix this add a new argument to
at_xdmac_off() to specify if runtime PM reference counter needs to be
decremented for queued active descriptors. Along with it moved the
at_xdmac_runtime_suspend_descriptors() call under at_xdmac_chan_is_paused()
check on suspend path as for the rest of channels the suspend is delayed
by atmel_xdmac_prepare() in case channel is enabled. Same approach has
been applied on resume path.
Fixes: 650b0e990cbd ("dmaengine: at_xdmac: add runtime pm support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-3-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Runtime PM APIs for at_xdmac just plays with clk_enable()/clk_disable()
letting aside the clk_prepare()/clk_unprepare() that needs to be
executed as the clock is also prepared on probe. Thus instead of using
runtime PM force suspend/resume APIs use
clk_disable_unprepare() + pm_runtime_put_noidle() on suspend and
clk_prepare_enable() + pm_runtime_get_noresume() on resume. This
approach as been chosen instead of using runtime PM force suspend/resume
with clk_unprepare()/clk_prepare() as it looks simpler and the final
code is better.
While at it added the missing pm_runtime_mark_last_busy() on suspend before
decrementing the reference counter.
Fixes: 650b0e990cbd ("dmaengine: at_xdmac: add runtime pm support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-2-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
status
The bit DMAC_CHEN[0] is automatically cleared by hardware to disable the
channel after the last AMBA transfer of the DMA transfer to the
destination has completed. Software can therefore poll this bit to
determine when this channel is free for a new DMA transfer.
This time requires at least 40 milliseconds on JH7110 SoC, otherwise an
error message 'failed to stop' will be reported.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Link: https://lore.kernel.org/r/20230322094820.24738-4-walker.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add DMA reset operation in device probe and use different configuration
on CH_CFG registers according to match data. Update all uses of
of_device_is_compatible with of_device_get_match_data.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20230322094820.24738-3-walker.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The issue_pending request is ignored while driver is processing a DMA
request. Fix to issue the pending requests on any dma channel status.
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-2-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The dw-edma driver stops after processing a DMA request even if a request
remains in the issued queue, which is not the expected behavior. The DMA
engine API requires continuous processing.
Add a trigger to start after one processing finished if there are requests
remain.
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-1-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
qcom_hidma uses of_dma_configure() which is declared in of_device.h.
platform_device.h and of_device.h get implicitly included by of_platform.h,
but that is going to be removed soon.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20230410232654.1561462-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
gpi_ch_init() doesn't lock the ctrl_lock mutex, so there is no need to
unlock it too. Instead the mutex is handled by the function
gpi_alloc_chan_resources(), which properly locks and unlocks the mutex.
=====================================
WARNING: bad unlock balance detected!
6.3.0-rc5-00253-g99792582ded1-dirty #15 Not tainted
-------------------------------------
kworker/u16:0/9 is trying to release lock (&gpii->ctrl_lock) at:
[<ffffb99d04e1284c>] gpi_alloc_chan_resources+0x108/0x5bc
but there are no more locks to release!
other info that might help us debug this:
6 locks held by kworker/u16:0/9:
#0: ffff575740010938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x220/0x594
#1: ffff80000809bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x220/0x594
#2: ffff575740f2a0f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188
#3: ffff57574b5570f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188
#4: ffffb99d06a2f180 (of_dma_lock){+.+.}-{3:3}, at: of_dma_request_slave_channel+0x138/0x280
#5: ffffb99d06a2ee20 (dma_list_mutex){+.+.}-{3:3}, at: dma_get_slave_channel+0x28/0x10c
stack backtrace:
CPU: 7 PID: 9 Comm: kworker/u16:0 Not tainted 6.3.0-rc5-00253-g99792582ded1-dirty #15
Hardware name: Google Pixel 3 (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace+0xa0/0xfc
show_stack+0x18/0x24
dump_stack_lvl+0x60/0xac
dump_stack+0x18/0x24
print_unlock_imbalance_bug+0x130/0x148
lock_release+0x270/0x300
__mutex_unlock_slowpath+0x48/0x2cc
mutex_unlock+0x20/0x2c
gpi_alloc_chan_resources+0x108/0x5bc
dma_chan_get+0x84/0x188
dma_get_slave_channel+0x5c/0x10c
gpi_of_dma_xlate+0x110/0x1a0
of_dma_request_slave_channel+0x174/0x280
dma_request_chan+0x3c/0x2d4
geni_i2c_probe+0x544/0x63c
platform_probe+0x68/0xc4
really_probe+0x148/0x2ac
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
device_add+0x60c/0x7d8
of_device_add+0x44/0x60
of_platform_device_create_pdata+0x90/0x124
of_platform_bus_create+0x15c/0x3c8
of_platform_populate+0x58/0xf8
devm_of_platform_populate+0x58/0xbc
geni_se_probe+0xf0/0x164
platform_probe+0x68/0xc4
really_probe+0x148/0x2ac
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x2bc/0x594
worker_thread+0x228/0x438
kthread+0x108/0x10c
ret_from_fork+0x10/0x20
Fixes: 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230409233355.453741-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In terminate_all we should queue up all submitted descriptors to be
freed. We do that for the content of the 'issued' and 'submitted' lists,
but the 'current_tx' descriptor falls through the cracks as it's
removed from the 'issued' list once it gets assigned to be the current
descriptor. Explicitly queue up freeing of the 'current_tx' descriptor
to address a memory leak that is otherwise present.
Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-2-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add missing setting of 'src_addr_widths', which is the same as for the
other direction.
Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-3-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In addition to TX channel and RX channel interrupt flags there's
another class of 'global' interrupt flags with unknown semantics. Those
weren't being handled up to now, and they are the suspected cause of
stuck IRQ states that have been sporadically occurring. Check the global
flags and clear them if raised.
Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-1-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add psil thread IDs for J784s4 and include J784s4 in the set of
"k3_soc_devices" in k3-psil.c.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
[vaishnav.a@ti.com: add MCSPI-TX and 3rd CSI2RX instance entries]
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
[j-choudhary@ti.com: add sa2ul entries, minor cleanups]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20230308201513.116638-1-j-choudhary@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Replace of_get_address() and of_translate_address() calls with single
call to of_address_to_resource().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230319163222.226377-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
clang with W=1 reports
drivers/dma/dw-edma/dw-edma-v0-core.c:162:20: error:
unused function 'writeq_ch' [-Werror,-Wunused-function]
static inline void writeq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
^
drivers/dma/dw-edma/dw-edma-v0-core.c:185:19: error:
unused function 'readq_ch' [-Werror,-Wunused-function]
static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
^
These functions and their wrapping macros are not used, so remove them.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230320234906.1730308-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
clang with W=1 reports
drivers/dma/ti/edma.c:321:20: error: unused function
'edma_and' [-Werror,-Wunused-function]
static inline void edma_and(struct edma_cc *ecc, int offset, unsigned and)
^
This function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230320231209.1728940-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Align ZDMA DMA as well as coherent memory masks to 44 bit. This is
required when using >32 bit memory regions.
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20230316093318.6722-1-harini.katakam@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
clang with W=1 reports
drivers/dma/tegra20-apb-dma.c:236:19: error: unused function
'tdma_read' [-Werror,-Wunused-function]
static inline u32 tdma_read(struct tegra_dma *tdma, u32 reg)
^
This function is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230322121001.2569909-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Per [1], UDMA TR15 transactions may hang if ICNT0 is less than 64B
Work around is to set EOL flag is to 1 for ICNT0.
Since, there is no performance penalty / side effects of setting EOL
flag event ICNTO > 64B, just set the flag for all UDMAP TR15
descriptors.
[1] https://www.ti.com/lit/er/sprz455a/sprz455a.pdf
Errata doc for J721E DRA829/TDA4VM Processors Silicon Revision 1.1/1.0
(Rev. A)
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
[j-choudhary@ti.com: minor cleanups]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20230323120107.27638-1-j-choudhary@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The src_word_size and dst_word_size members of the rz_dmac_chan
structure were never used, so they can be removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/021bdf56f1716276a55bcfb1ea81bba5f1d42b3d.1679910274.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add IAA (IAX) capability mask sysfs attribute to expose to applications.
The mask provides application knowledge of what capabilities this IAA
device supports. This mask is available for IAA 2.0 device or later.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230303213732.3357494-3-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
SWERROR register is 4 64bit wide registers. Currently the sysfs attribute
just outputs 4 64bit hex integers. Convert to output with %*pb format
specifier.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230303213732.3357494-2-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_clk_get_[optional_]enabled() instead of hand writing it.
It saves some LoC.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/cc14e490f4e6002a17c9c7d283fe6a93179766c2.1679814350.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
