summaryrefslogtreecommitdiff
path: root/drivers/dma/sh
AgeCommit message (Collapse)AuthorFilesLines
2022-04-08dmaengine: sh: Kconfig: Make RZ_DMAC depend on ARCH_RZG2LLad Prabhakar1-1/+1
The DMAC block is identical on Renesas RZ/G2L, RZ/G2UL and RZ/V2L SoC's, so instead of adding dependency for each SoC's add dependency on ARCH_RZG2L. The ARCH_RZG2L config option is already selected by ARCH_R9A07G043, ARCH_R9A07G044 and ARCH_R9A07G054. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220406080417.14593-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-03-11dmaengine: sh: Kconfig: Add ARCH_R9A07G054 dependency for RZ_DMAC config optionLad Prabhakar1-3/+3
RZ/V2L DMA block is identical to one found on RZ/G2L SoC. This patch adds ARCH_R9A07G054 dependency for RZ_DMAC config option so that the driver can be enabled on RZ/V2L SoC. While at it, also update config help text. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220221224321.11939-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-03-10dmaengine: Revert "dmaengine: shdma: Fix runtime PM imbalance on error"Vinod Koul1-3/+1
This reverts commit 455896c53d5b ("dmaengine: shdma: Fix runtime PM imbalance on error") as the patch wrongly reduced the count on error and did not bail out. So drop the count by reverting the patch . Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-15dmaengine: shdma: Fix runtime PM imbalance on errorYongzhi Liu1-1/+3
pm_runtime_get_() increments the runtime PM usage counter even when it returns an error code, thus a matching decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn> Link: https://lore.kernel.org/r/1642311296-87020-1-git-send-email-lyz_cs@pku.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-15dmaengine: sh: rcar-dmac: Check for error num after dma_set_max_seg_sizeJiasheng Jiang1-1/+4
As the possible failure of the dma_set_max_seg_size(), it should be better to check the return value of the dma_set_max_seg_size(). Fixes: 97d49c59e219 ("dmaengine: rcar-dmac: set scatter/gather max segment size") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220111011239.452837-1-jiasheng@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-15dmaengine: sh: rcar-dmac: Check for error num after setting maskJiasheng Jiang1-1/+3
Because of the possible failure of the dma_supported(), the dma_set_mask_and_coherent() may return error num. Therefore, it should be better to check it and return the error if fails. Fixes: dc312349e875 ("dmaengine: rcar-dmac: Widen DMA mask to 40 bits") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220106030939.2644320-1-jiasheng@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-03dmaengine: rcar-dmac: Add support for R-Car S4-8Yoshihiro Shimoda1-7/+10
Add support for R-Car S4-8. We can reuse R-Car V3U code so that renames variable names as "gen4". Note that some registers of R-Car V3U do not exist on R-Car S4-8, but none of them are used by the driver for now. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20211222114507.1252947-3-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-17Merge tag 'dmaengine_topic_slave_id_removal_5.17' into nextVinod Koul1-8/+0
Merge the tag dmaengine_topic_slave_id_removal_5.17 into next. This brings in the slave_id removal topic changes
2021-12-17dmaengine: sh: Use bitmap_zalloc() when applicableChristophe JAILLET1-4/+2
'shdma_slave_used' is a bitmap. So use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/3efaf2784424ae3d7411dc47f8b6b03e7bb8c059.1637702701.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-17dmaengine: shdma: remove legacy slave_id parsingArnd Bergmann1-8/+0
The slave device is picked through either devicetree or a filter function, and any remaining out-of-tree drivers would have warned about this usage since 2015. Stop interpreting the field finally so it can be removed from the interface. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20211122222203.4103644-6-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-25dmaengine: sh: make array ds_lut staticColin Ian King1-1/+1
Don't populate the read-only array ds_lut on the stack but instead it static. Also makes the object code smaller by 163 bytes: Before: text data bss dec hex filename 23508 4796 0 28304 6e90 ./drivers/dma/sh/rz-dmac.o After: text data bss dec hex filename 23281 4860 0 28141 6ded ./drivers/dma/sh/rz-dmac.o (gcc version 11.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210915112038.12407-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-25dmaengine: rcar-dmac: refactor the error handling code of rcar_dmac_probeDongliang Mu1-6/+7
In rcar_dmac_probe, if pm_runtime_resume_and_get fails, it forgets to disable runtime PM. And of_dma_controller_free should only be invoked after the success of of_dma_controller_register. Fix this by refactoring the error handling code. Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20211020143546.3436205-1-mudongliangabcd@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-18dmaengine: sh: rz-dmac: Add DMA clock handlingBiju Das1-0/+14
Currently, DMA clocks are turned on by the bootloader. This patch adds support for DMA clock handling so that the driver manages the DMA clocks. Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210923102451.11403-1-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-31dmaengine: sh: fix some NULL dereferencesDan Carpenter1-2/+2
The dma_free_coherent() function needs a valid device pointer or it will crash. Fixes: 550c591a89a1 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210827085410.GA9183@kili Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-31dmaengine: sh: Fix unused initialization of pointer lmdescColin Ian King1-3/+1
Pointer lmdesc is being inintialized with a value that is never read, it is later being re-assigned a new value. Fix this by initializing it with the latter value. Addresses-Coverity: ("Unused value") Fixes: 550c591a89a1 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210829152811.529766-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-29dmaengine: sh: Add DMAC driver for RZ/G2L SoCBiju Das3-0/+981
Add DMA Controller driver for RZ/G2L SoC. Based on the work done by Chris Brandt for RZ/A DMA driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210806095322.2326-4-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-02dmaengine: usb-dmac: make usb_dmac_get_current_residue unsignedJordy Zomer1-1/+1
The usb_dmac_get_current_residue function used to take a signed integer as a pos parameter. The only callers of this function passes an unsigned integer to it. Therefore to make it obviously safe, let's just make this an unsgined integer as this is used in pointer arithmetics. Signed-off-by: Jordy Zomer <jordy@pwning.systems> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210731091939.510816-1-jordy@pwning.systems Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-14dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()Yu Kuai1-1/+1
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by moving the error_pm label above the pm_runtime_put() in the error path. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20210706124521.1371901-1-yukuai3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-05Merge tag 'dmaengine-5.14-rc1' of ↵Linus Torvalds2-77/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "This time around we have a smaller pull request than usual and this includes code removal, so should be good! New drivers/devices - Support for QCOM SM8250 GPI DMA - removal of shdma-of driver and binding Updates: - arm-pl08x yaml binding move - altera-msgdma gained DT support - removal of imx-sdma platform data support - idxd and xilinx driver updates" * tag 'dmaengine-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (22 commits) dmaengine: imx-sdma: Remove platform data header dmaengine: xilinx: dpdma: Fix spacing around addr[i-1] dmaengine: xilinx: dpdma: Use kernel type u32 over uint32_t dmaengine: altera-msgdma: add OF support MAINTAINERS: add entry for Altera mSGDMA dt-bindings: dma: add schema for altera-msgdma dmaengine: xilinx: dpdma: fix kernel-doc dmaengine: sf-pdma: apply proper spinlock flags in sf_pdma_prep_dma_memcpy() dmaengine: sh: Remove unused shdma-of driver dt-bindings: dmaengine: Remove SHDMA Device Tree bindings dmaengine: qcom: gpi: Add SM8250 compatible dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250 dmaengine: sun4i: Use list_move_tail instead of list_del/list_add_tail dmaengine: ti: omap-dma: Skip pointless cpu_pm context restore on errors dmaengine: hsu: Account transferred bytes dmaengine: Move kdoc description of struct dma_chan_percpu closer to it dmaengine: xilinx: dpdma: Print debug message when losing vsync race dmaengine: xilinx: dpdma: Print channel number in kernel log messages dt-bindings: dma: convert arm-pl08x to yaml dmaengine: idxd: remove devm allocation for idxd->int_handles ...
2021-06-16dmaengine: sh: Remove unused shdma-of driverGeert Uytterhoeven2-77/+1
Remove the DT-based Renesas SHDMA DMA multiplexer driver, as it is unused. The DMA multiplexer node and one DMA controller instance were added to the R-Mobile APE6 .dtsi file, but DMA support was never fully enabled, cfr. commit a19788612f51b787 ("dmaengine: sh: Remove R-Mobile APE6 support"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/e9445a5f4ac15fc4d3b376b5e675e39f8c95b967.1623406640.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03dmaengine: rcar-dmac: Fix PM reference leak in rcar_dmac_probe()Zou Wei1-1/+1
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1622442963-54095-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01dmaengine: rcar-dmac: Add support for R-Car V3UGeert Uytterhoeven1-23/+58
The DMACs (both SYS-DMAC and RT-DMAC) on R-Car V3U differ slightly from the DMACs on R-Car Gen2 and other R-Car Gen3 SoCs: 1. The per-channel registers are located in a second register block. Add support for mapping the second block, using the appropriate offsets and stride. 2. The common Channel Clear Register (DMACHCLR) was replaced by a per-channel register. Update rcar_dmac_chan_clear{,_all}() to handle this. As rcar_dmac_init() needs to clear the status before the individual channels are probed, channel index and base address initialization are moved forward. Inspired by a patch in the BSP by Phong Hoang <phong.hoang.wz@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210128084455.2237256-5-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01dmaengine: rcar-dmac: Add helpers for clearing DMA channel statusGeert Uytterhoeven1-2/+13
Extract the code to clear the status of one or all channels into their own helpers, to prepare for the different handling of the R-Car V3U SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210128084455.2237256-4-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01dmaengine: rcar-dmac: Add for_each_rcar_dmac_chan() helperGeert Uytterhoeven1-12/+10
Add a helper macro for iterating over all DMAC channels, taking into account the channel mask. Use it where appropriate, to simplify code. Restore "reverse Christmas tree" order of local variables while adding a new variable. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210128084455.2237256-3-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-05dmaengine: rcar-dmac: drop double zeroingJulia Lawall1-1/+1
sg_init_table zeroes its first argument, so the allocation of that argument doesn't have to. the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,n,flags; @@ x = - kcalloc + kmalloc_array (n,sizeof(*x),flags) ... sg_init_table(x,n) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1600601186-7420-10-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-05dmaengine: sh: drop double zeroingJulia Lawall1-1/+1
sg_init_table zeroes its first argument, so the allocation of that argument doesn't have to. the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,n,flags; @@ x = - kcalloc + kmalloc_array (n,sizeof(*x),flags) ... sg_init_table(x,n) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1600601186-7420-5-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-11dmaengine: Kconfig: Update description for RCAR_DMAC configLad Prabhakar1-2/+2
rcar-dmac driver is used on Renesas R-Car Gen{2,3} and Renesas RZ/G{1,2} SoC's, update the same to reflect the description for RCAR_DMAC config. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200911095734.19348-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-11Merge tag 'v5.9-rc4' into nextVinod Koul1-1/+1
Linux 5.9-rc4
2020-09-11dmaengine: rcar-dmac: Drop local dma_parmsRobin Murphy1-2/+0
Since commit 9495b7e92f71 ("driver core: platform: Initialize dma_parms for platform devices"), struct platform_device already provides a dma_parms structure, so we can save allocating another one. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/23d40e15af10aad4724a2770ec18b4b28c1b8a71.1599164692.git.robin.murphy@arm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-24dmaengine: sh: usb-dmac: set tx_result parametersYoshihiro Shimoda1-0/+2
A client driver (renesas_usbhs) assumed that dmaengine_tx_status() could return the residue even if the transfer was completed. However, this was not correct usage [1] and this caused to break getting the residue after the commit 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()") actually. So, this is possible to get wrong received size if the usb controller gets a short packet. For example, g_zero driver causes "bad OUT byte" errors. To use the tx_result from the renesas_usbhs driver when the transfer is completed, set the tx_result parameters. Notes that the renesas_usbhs driver needs to update for it. [1] https://lore.kernel.org/dmaengine/20200616165550.GP2324254@vkoul-mobl/ Reported-by: Hien Dang <hien.dang.eb@renesas.com> Fixes: 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1592482053-19433-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-23dmaengine: fix spelling mistake "exceds" -> "exceeds"Colin Ian King2-2/+2
There are a couple of spelling mistakes in dev_err error messages. Fix them. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200316091653.110984-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-14dmaengine: rcar-dmac: Add dma-channel-mask property supportYoshihiro Shimoda1-1/+9
This patch adds dma-channel-mask property support not to reserve some DMA channels for some reasons. (for example: a heterogeneous CPU uses it.) Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1568010892-17606-5-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-14dmaengine: rcar-dmac: Use devm_platform_ioremap_resource()Yoshihiro Shimoda1-3/+1
This patch uses devm_platform_ioremap_resource() instead of using platform_get_resource() and devm_ioremap_resource() together to simplify. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Link: https://lore.kernel.org/r/1568010892-17606-4-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-14dmaengine: rcar-dmac: Use of_data values instead of a macroYoshihiro Shimoda1-5/+28
Since we will have changed memory mapping of the DMAC in the future, this patch uses of_data values instead of a macro to calculate each channel's base offset. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Link: https://lore.kernel.org/r/1568010892-17606-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-09-18Merge tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-6/+2
Pull dmaengine updates from Vinod Koul: - Move Dmaengine DT bindings to YAML and convert Allwinner to schema. - FSL dma device_synchronize implementation - DW split acpi and of helpers and updates to driver and support for Elkhart Lake - Move filter fn as private for omap-dma and edma drivers and improvements to these drivers - Mark expected switch fall-through in couple of drivers - Renames of shdma and nbpfaxi binding document - Minor updates to bunch of drivers * tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (55 commits) dmaengine: ti: edma: Use bitmap_set() instead of open coded edma_set_bits() dmaengine: ti: edma: Only reset region0 access registers dmaengine: ti: edma: Do not reset reserved paRAM slots dmaengine: iop-adma.c: fix printk format warning dmaengine: stm32-dma: Use struct_size() helper dt-bindings: dmaengine: dma-common: Fix the dma-channel-mask property dmanegine: ioat/dca: Use struct_size() helper dmaengine: iop-adma: remove set but not used variable 'slots_per_op' dmaengine: dmatest: Add support for completion polling dmaengine: ti: omap-dma: Remove variable override in omap_dma_tx_status() dmaengine: ti: omap-dma: Remove 'Assignment in if condition' dmaengine: ti: edma: Remove 'Assignment in if condition' dmaengine: dw: platform: Split OF helpers to separate module dmaengine: dw: platform: Split ACPI helpers to separate module dmaengine: dw: platform: Move handle check to dw_dma_acpi_controller_register() dmaengine: dw: platform: Switch to acpi_dma_controller_register() dmaengine: dw: platform: Use devm_platform_ioremap_resource() dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw: platform: Use struct dw_dma_chip_pdata dmaengine: dw: Export struct dw_dma_chip_pdata for wider use ...
2019-09-04dmaengine: rcar-dmac: Fix DMACHCLR handling if iommu is mappedYoshihiro Shimoda1-9/+19
The commit 20c169aceb45 ("dmaengine: rcar-dmac: clear pertinence number of channels") forgets to clear the last channel by DMACHCLR in rcar_dmac_init() (and doesn't need to clear the first channel) if iommu is mapped to the device. So, this patch fixes it by using "channels_mask" bitfield. Note that the hardware and driver don't support more than 32 bits in DMACHCLR register anyway, so this patch should reject more than 32 channels in rcar_dmac_parse_of(). Fixes: 20c169aceb459575 ("dmaengine: rcar-dmac: clear pertinence number of channels") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1567424643-26629-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-31dmaengine: Remove dev_err() usage after platform_get_irq()Stephen Boyd2-6/+2
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: dmaengine@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-11-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: rcar-dmac: Reject zero-length slave DMA requestsGeert Uytterhoeven1-1/+1
While the .device_prep_slave_sg() callback rejects empty scatterlists, it still accepts single-entry scatterlists with a zero-length segment. These may happen if a driver calls dmaengine_prep_slave_single() with a zero len parameter. The corresponding DMA request will never complete, leading to messages like: rcar-dmac e7300000.dma-controller: Channel Address Error happen and DMA timeouts. Although requesting a zero-length DMA request is a driver bug, rejecting it early eases debugging. Note that the .device_prep_dma_memcpy() callback already rejects requests to copy zero bytes. Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> Analyzed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: sh: usb-dmac: Use [] to denote a flexible array memberGeert Uytterhoeven1-1/+1
Flexible array members should be denoted using [] instead of [0], else gcc will not warn when they are no longer at the end of the structure. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-27dmaengine: sh: usb-dmac: Let the core do the device node validationBaolin Wang1-4/+2
Let the DMA engine core do the device node validation instead of drivers. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-27dmaengine: sh: rcar-dmac: Let the core do the device node validationBaolin Wang1-3/+3
Let the DMA engine core do the device node validation instead of drivers. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21dmaengine: sudmac: remove unused driverSimon Horman3-421/+0
SUDMAC driver was introduced in v3.10 but was never integrated for use by any platform. As it is unused remove it. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-09Merge tag 'dmaengine-5.2-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-2/+2
Pull dmaengine updates from Vinod Koul: - Updates to stm32 dma residue calculations - Interleave dma capability to axi-dmac and support for ZynqMP arch - Rework of channel assignment for rcar dma - Debugfs for pl330 driver - Support for Tegra186/Tegra194, refactoring for new chips and support for pause/resume - Updates to axi-dmac, bcm2835, fsl-edma, idma64, imx-sdma, rcar-dmac, stm32-dma etc - dev_get_drvdata() updates on few drivers * tag 'dmaengine-5.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (34 commits) dmaengine: tegra210-adma: restore channel status dmaengine: tegra210-dma: free dma controller in remove() dmaengine: tegra210-adma: add pause/resume support dmaengine: tegra210-adma: add support for Tegra186/Tegra194 Documentation: DT: Add compatibility binding for Tegra186 dmaengine: tegra210-adma: prepare for supporting newer Tegra chips dmaengine: at_xdmac: remove a stray bottom half unlock dmaengine: fsl-edma: Adjust indentation dmaengine: fsl-edma: Fix typo in Vybrid name dmaengine: stm32-dma: fix residue calculation in stm32-dma dmaengine: nbpfaxi: Use dev_get_drvdata() dmaengine: bcm-sba-raid: Use dev_get_drvdata() dmaengine: stm32-dma: Fix unsigned variable compared with zero dmaengine: stm32-dma: use platform_get_irq() dmaengine: rcar-dmac: Update copyright information dmaengine: imx-sdma: Only check ratio on parts that support 1:1 dmaengine: xgene-dma: fix spelling mistake "descripto" -> "descriptor" dmaengine: idma64: Move driver name to the header dmaengine: bcm2835: Drop duplicate capability setting. dmaengine: pl330: _stop: clear interrupt status ...
2019-04-26dmaengine: rcar-dmac: Update copyright informationHiroyuki Yokoyama1-2/+2
Update copyright and string for Gen3. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-04-23dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_statusAchim Dahlhoff1-3/+23
The tx_status poll in the rcar_dmac driver reads the status register which indicates which chunk is busy (DMACHCRB). Afterwards the point inside the chunk is read from DMATCRB. It is possible that the chunk has changed between the two reads. The result is a non-monotonous increase of the residue. Fix this by introducing a 'safe read' logic. Fixes: 73a47bd0da66 ("dmaengine: rcar-dmac: use TCRB instead of TCR for residue") Signed-off-by: Achim Dahlhoff <Achim.Dahlhoff@de.bosch.com> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: <stable@vger.kernel.org> # v4.16+ Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-04-23dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is validDirk Behme1-1/+3
Having a cyclic DMA, a residue 0 is not an indication of a completed DMA. In case of cyclic DMA make sure that dma_set_residue() is called and with this a residue of 0 is forwarded correctly to the caller. Fixes: 3544d2878817 ("dmaengine: rcar-dmac: use result of updated get_residue in tx_status") Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Achim Dahlhoff <Achim.Dahlhoff@de.bosch.com> Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Yao Lihua <ylhuajnu@outlook.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-20dmaengine: usb-dmac: Make DMAC system sleep callbacks explicitPhuong Nguyen1-0/+2
This commit fixes the issue that USB-DMAC hangs silently after system resumes on R-Car Gen3 hence renesas_usbhs will not work correctly when using USB-DMAC for bulk transfer e.g. ethernet or serial gadgets. The issue can be reproduced by these steps: 1. modprobe g_serial 2. Suspend and resume system. 3. connect a usb cable to host side 4. Transfer data from Host to Target 5. cat /dev/ttyGS0 (Target side) 6. echo "test" > /dev/ttyACM0 (Host side) The 'cat' will not result anything. However, system still can work normally. Currently, USB-DMAC driver does not have system sleep callbacks hence this driver relies on the PM core to force runtime suspend/resume to suspend and reinitialize USB-DMAC during system resume. After the commit 17218e0092f8 ("PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()"), PM core will not force runtime suspend/resume anymore so this issue happens. To solve this, make system suspend resume explicit by using pm_runtime_force_{suspend,resume}() as the system sleep callbacks. SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is used to make sure USB-DMAC suspended after and initialized before renesas_usbhs." Signed-off-by: Phuong Nguyen <phuong.nguyen.xw@renesas.com> Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: <stable@vger.kernel.org> # v4.16+ [shimoda: revise the commit log and add Cc tag] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-02Merge tag 'iommu-updates-v4.21' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - Page table code for AMD IOMMU now supports large pages where smaller page-sizes were mapped before. VFIO had to work around that in the past and I included a patch to remove it (acked by Alex Williamson) - Patches to unmodularize a couple of IOMMU drivers that would never work as modules anyway. - Work to unify the the iommu-related pointers in 'struct device' into one pointer. This work is not finished yet, but will probably be in the next cycle. - NUMA aware allocation in iommu-dma code - Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver - Scalable mode support for the Intel VT-d driver - PM runtime improvements for the ARM-SMMU driver - Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom - Various smaller fixes and improvements * tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits) iommu: Check for iommu_ops == NULL in iommu_probe_device() ACPI/IORT: Don't call iommu_ops->add_device directly iommu/of: Don't call iommu_ops->add_device directly iommu: Consolitate ->add/remove_device() calls iommu/sysfs: Rename iommu_release_device() dmaengine: sh: rcar-dmac: Use device_iommu_mapped() xhci: Use device_iommu_mapped() powerpc/iommu: Use device_iommu_mapped() ACPI/IORT: Use device_iommu_mapped() iommu/of: Use device_iommu_mapped() driver core: Introduce device_iommu_mapped() function iommu/tegra: Use helper functions to access dev->iommu_fwspec iommu/qcom: Use helper functions to access dev->iommu_fwspec iommu/of: Use helper functions to access dev->iommu_fwspec iommu/mediatek: Use helper functions to access dev->iommu_fwspec iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec iommu/dma: Use helper functions to access dev->iommu_fwspec iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec ACPI/IORT: Use helper functions to access dev->iommu_fwspec iommu: Introduce wrappers around dev->iommu_fwspec ...
2018-12-17dmaengine: sh: rcar-dmac: Use device_iommu_mapped()Joerg Roedel1-1/+1
Use Use device_iommu_mapped() to check if the device is already mapped by an IOMMU. Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 07:18:50 +0300