summaryrefslogtreecommitdiff
path: root/drivers/crypto/hisilicon
AgeCommit message (Collapse)AuthorFilesLines
2022-12-09crypto: hisilicon/hpre - Set DMA alignment explicitlyHerbert Xu1-15/+25
This driver has been implicitly relying on kmalloc alignment to be sufficient for DMA. This may no longer be the case with upcoming arm64 changes. This patch changes it to explicitly request DMA alignment from the Crypto API. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-02crypto: ccree,hisilicon - Fix dependencies to correct algorithmTianjia Zhang1-1/+1
Commit d2825fa9365d ("crypto: sm3,sm4 - move into crypto directory") moves the SM3 and SM4 stand-alone library and the algorithm implementation for the Crypto API into the same directory, and the corresponding relationship of Kconfig is modified, CONFIG_CRYPTO_SM3/4 corresponds to the stand-alone library of SM3/4, and CONFIG_CRYPTO_SM3/4_GENERIC corresponds to the algorithm implementation for the Crypto API. Therefore, it is necessary for this module to depend on the correct algorithm. Fixes: d2825fa9365d ("crypto: sm3,sm4 - move into crypto directory") Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-02crypto: hisilicon/hpre - Use helper to set reqsizeHerbert Xu1-6/+13
The value of reqsize must only be changed through the helper. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25crypto: hisilicon/qm - add device status check when start failsWeili Qian1-2/+8
In function 'hisi_qm_resume', if the device fails to be started, directly returning error code will cause the device to be unavailable. However, the failure may be caused by device error, which will be reported to the driver, and driver can reset and restart device. Therefore, check device status instead of returning error code directly. Returns 0 if device error has occurred, otherwise returns error code. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25crypto: hisilicon/qm - fix 'QM_XEQ_DEPTH_CAP' mask valueWeili Qian1-1/+1
'QM_XEQ_DEPTH_CAP' mask value is GENMASK(31, 0) instead of GENMASK(15, 0). If the mask value is incorrect, will cause abnormal events cannot be handled. So fix it. Fixes: 129a9f340172 ("crypto: hisilicon/qm - get qp num and depth from hardware registers") Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18crypto: hisilicon/sec - remove continuous blank linesWenkai Lin2-2/+0
Fix that put two or more continuous blank lines inside function. Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18crypto: hisilicon/sec - fix spelling mistake 'ckeck' -> 'check'Kai Ye1-2/+2
There are a couple of spelling mistakes in sec2. Fix them. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18crypto: hisilicon/qm - the command dump process is modifiedKai Ye1-40/+90
Reduce the function complexity by use the function table in the process of dumping queue. The function input parameters are unified. And maintainability is enhanced. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18crypto: hisilicon/qm - split a debugfs.c from qmKai Ye4-1172/+1192
Considering that the qm feature and debugfs feature are independent. The code related to debugfs is getting larger and larger. It should be separate as a debugfs file. So move some debugfs code to new file from qm file. The qm code logic is not modified. And maintainability is enhanced. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18crypto: hisilicon/qm - modify the process of regs dfxKai Ye4-77/+95
The last register logic and different register logic are combined. Use "u32" instead of 'int' in the regs function input parameter to simplify some checks. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18crypto: hisilicon/qm - delete redundant null assignment operationsKai Ye1-1/+0
There is no security data in the pointer. It is only a value transferred as a structure. It makes no sense to zero a variable that is on the stack. So not need to set the pointer to null. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-28crypto: hisilicon/qm - delete redundancy checkKai Ye1-3/+0
Because the permission on the VF debugfs file is "0444". So the VF function checking is redundant in qos writing api. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-28crypto: hisilicon/qm - add pci bdf number checkKai Ye1-25/+12
The pci bdf number check is added for qos written by using the pci api. Directly get the devfn by pci_dev, so delete some redundant code. And use the kstrtoul instead of sscanf to simplify code. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-28crypto: hisilicon/qm - increase the memory of local variablesKai Ye1-2/+1
Increase the buffer to prevent stack overflow by fuzz test. The maximum length of the qos configuration buffer is 256 bytes. Currently, the value of the 'val buffer' is only 32 bytes. The sscanf does not check the dest memory length. So the 'val buffer' may stack overflow. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-21crypto: hisilicon/qm - re-enable communicate interrupt before notifying PFWeili Qian1-1/+1
After the device is reset, the VF needs to re-enable communication interrupt before the VF sends restart complete message to the PF. If the interrupt is re-enabled after the VF notifies the PF, the PF may fail to send messages to the VF after receiving VF's restart complete message. Fixes: 760fe22cf5e9 ("crypto: hisilicon/qm - update reset flow") Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-21crypto: hisilicon/sec - enabling clock gating of the address prefetch moduleWeili Qian1-1/+1
Change the value of clock gating register to 0x7fff to enable clock gating of the address prefetch module. When the device is idle, the clock is turned off to save power. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-21crypto: hisilicon/qm - fix incorrect parameters usageWeili Qian1-2/+2
In qm_get_xqc_depth(), parameters low_bits and high_bits save the values of the corresponding bits. However, the values saved by the two parameters are opposite. As a result, the values returned to the callers are incorrect. Fixes: 129a9f340172 ("crypto: hisilicon/qm - get qp num and depth from hardware registers") Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-21crypto: hisilicon/qm - drop unnecessary IS_ENABLE(CONFIG_NUMA) checkYicong Yang1-6/+4
dev_to_node() can handle the case when CONFIG_NUMA is not set, so the check of CONFIG_NUMA is redundant and can be removed. Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-21crypto: hisilicon/hpre - fix resource leak in remove processZhiqi Song1-8/+2
In hpre_remove(), when the disable operation of qm sriov failed, the following logic should continue to be executed to release the remaining resources that have been allocated, instead of returning directly, otherwise there will be resource leakage. Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-24crypto: hisilicon/qm - fix the qos value initializationKai Ye1-7/+15
The default qos value is not initialized when sriov is repeatedly enabled and disabled. So add the vf qos value initialized in the sriov enable process. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon - support get algs by the capability registerZhiqi Song5-18/+222
The value of qm algorithm can change dynamically according to the value of the capability register. Add xxx_set_qm_algs() function to obtain the algs that the hardware device supported from the capability register and set them into usr mode attribute files. Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/sec - get algorithm bitmap from registersWenkai Lin3-121/+236
Add function 'sec_get_alg_bitmap' to get hardware algorithm bitmap before register algorithm to crypto, instead of determining whether to register an algorithm based on hardware platform's version. Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/zip - support zip capabilityWeili Qian3-42/+128
Add function 'hisi_zip_alg_support' to get device configuration information from capability registers, instead of determining whether to register an algorithm based on hardware platform's version. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/hpre - optimize registration of ecdhZhiqi Song1-73/+63
Use table to store the different ecdh curve configuration, making the registration of ecdh clearer and expansion more convenient. Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/hpre - support hpre capabilityZhiqi Song3-38/+157
Read some hpre device configuration info from capability register, instead of fixed macros. Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - support get device irq information from hardware ↵Weili Qian1-99/+195
registers Support get device irq information from hardware registers instead of fixed macros. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - get error type from hardware registersWeili Qian5-103/+202
Hardware V3 and later versions support get error type from registers. To be compatible with later hardware versions, get error type from registers instead of fixed marco. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - add UACCE_CMD_QM_SET_QP_INFO supportWeili Qian1-3/+18
To be compatible with accelerator devices of different versions, 'UACCE_CMD_QM_SET_QP_INFO' ioctl is added to obtain queue information in userspace, including queue depth and buffer description size. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - get qp num and depth from hardware registersWeili Qian7-133/+198
Hardware V3 and later versions can obtain qp num and depth supported by the hardware from registers. To be compatible with later hardware versions, get qp num and depth from registers instead of fixed marcos. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - get hardware features from hardware registersWeili Qian4-67/+141
Before hardware V3, hardwares do not provide the feature registers, driver resolves hardware differences based on the hardware version. As a result, the driver does not support the new hardware. Hardware V3 and later versions support to obtain hardware features, such as power-gating management and doorbell isolation, through the hardware registers. To be compatible with later hardware versions, the features of the current device is obtained by reading the hardware registers instead of the hardware version. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/sec - delete redundant blank linesKai Ye1-2/+0
Some coding style fixes in sec crypto file. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-02crypto: hisilicon/qm - return failure if vfs_num exceeds total VFsWeili Qian1-1/+7
The accelerator drivers supports users to enable VFs through the module parameter 'vfs_num'. If the number of VFs to be enabled exceeds the total VFs, all VFs are enabled. Change it to the same as enabling VF through the 'sriov_numvfs' file. Returns -ERANGE if the number of VFs to be enabled exceeds total VFs. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-02crypto: hisilicon/qm - fix missing put dfx accessWeili Qian1-2/+4
In function qm_cmd_write(), if function returns from branch 'atomic_read(&qm->status.flags) == QM_STOP', the got dfx access is forgotten to put. Fixes: 607c191b371d ("crypto: hisilicon - support runtime PM for accelerator device") Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-02crypto: hisilicon/qm - check mailbox operation resultWeili Qian1-1/+14
After the mailbox operation is complete, the result may be unsuccessful. It needs to check the status bits of the mailbox register, if it fails, -EIO is returned. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26crypto: hisilicon/qm - no judgment in the back processKai Ye1-5/+3
Judgment should not be added in the back process. So clean it. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19crypto: hisilicon/qm - remove unneeded hardware cache write backWeili Qian1-1/+0
Data in the hardware cache needs to be written back to the memory before the queue memory is released. Currently, the queue memory is applied for when the driver is loaded and released when the driver is removed. Therefore, the hardware cache does not need to be written back when process puts queue. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19crypto: hisilicon/qm - remove unneeded data storageJunchong Pan1-60/+20
The dump_show() is used to output hardware information for error locating. It is not need to apply for memory to temporarily store the converted data. It can directly output the data. Therefore, remove some unnecessary code. Signed-off-by: Junchong Pan <panjunchong@hisilicon.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19crypto: hisilicon/qm - fix missing destroy qp_idrWeili Qian1-3/+4
In the function hisi_qm_memory_init(), if resource alloc fails after idr_init, the initialized qp_idr needs to be destroyed. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19crypto: hisilicon/hpre - change return type of hpre_cluster_inqry_write()Weili Qian1-6/+2
hpre_cluster_inqry_write() always returns 0. So change the type of hpre_cluster_inqry_write() to void. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19crypto: hisilicon/zip - some misc cleanupYang Shen3-19/+23
Some cleanup for code: 1. Change names for easy to understand. 2. Unify the variables type. 3. Use the right return value. Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19crypto: hisilicon/zip - optimization for performanceYang Shen1-14/+13
1.Remove some useless steps during doing requests. 2.Adjust the possibility of branch prediction. Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19crypto: hisilicon - Remove pci_aer_clear_nonfatal_status() callZhuo Chen1-2/+0
Calls to pci_cleanup_aer_uncorrect_error_status() have already been removed after commit 62b36c3ea664 ("PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() calls"). But in commit 6c6dd5802c2d ("crypto: hisilicon/qm - add controller reset interface") pci_aer_clear_nonfatal_status() was used again, so remove it in this patch. note: pci_cleanup_aer_uncorrect_error_status() was renamed to pci_aer_clear_nonfatal_status() in commit 894020fdd88c ("PCI/AER: Rationalize error status register clearing") Signed-off-by: Zhuo Chen <chenzhuo.1@bytedance.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19crypto: hisilicon/zip - fix mismatch in get/set sgl_sge_nrYe Weihua1-2/+2
KASAN reported this Bug: [17619.659757] BUG: KASAN: global-out-of-bounds in param_get_int+0x34/0x60 [17619.673193] Read of size 4 at addr fffff01332d7ed00 by task read_all/1507958 ... [17619.698934] The buggy address belongs to the variable: [17619.708371] sgl_sge_nr+0x0/0xffffffffffffa300 [hisi_zip] There is a mismatch in hisi_zip when get/set the variable sgl_sge_nr. The type of sgl_sge_nr is u16, and get/set sgl_sge_nr by param_get/set_int. Replacing param_get/set_int to param_get/set_ushort can fix this bug. Fixes: f081fda293ffb ("crypto: hisilicon - add sgl_sge_nr module param for zip") Signed-off-by: Ye Weihua <yeweihua4@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-29crypto: hisilicon/zip - Use the bitmap API to allocate bitmapsChristophe JAILLET1-5/+5
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less verbose and it improves the semantic. While at it, add an explicit include <linux/bitmap.h>. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-29crypto: hisilicon/sec - fix auth key size errorKai Ye2-3/+4
The authentication algorithm supports a maximum of 128-byte keys. The allocated key memory is insufficient. Fixes: 2f072d75d1ab ("crypto: hisilicon - Add aead support on SEC2") Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-29crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirqZhengchao Shao1-1/+1
The hpre encryption driver may be used to encrypt and decrypt packets during the rx softirq, it is not allowed to use GFP_KERNEL. Fixes: c8b4b477079d ("crypto: hisilicon - add HiSilicon HPRE accelerator") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-08crypto: hisilicon - Kunpeng916 crypto driver don't sleep when in softirqZhengchao Shao2-8/+8
When kunpeng916 encryption driver is used to deencrypt and decrypt packets during the softirq, it is not allowed to use mutex lock. Fixes: 915e4e8413da ("crypto: hisilicon - SEC security accelerator driver") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-08crypto: hisilicon/sec - don't sleep when in softirqZhengchao Shao2-11/+11
When kunpeng920 encryption driver is used to deencrypt and decrypt packets during the softirq, it is not allowed to use mutex lock. The kernel will report the following error: BUG: scheduling while atomic: swapper/57/0/0x00000300 Call trace: dump_backtrace+0x0/0x1e4 show_stack+0x20/0x2c dump_stack+0xd8/0x140 __schedule_bug+0x68/0x80 __schedule+0x728/0x840 schedule+0x50/0xe0 schedule_preempt_disabled+0x18/0x24 __mutex_lock.constprop.0+0x594/0x5dc __mutex_lock_slowpath+0x1c/0x30 mutex_lock+0x50/0x60 sec_request_init+0x8c/0x1a0 [hisi_sec2] sec_process+0x28/0x1ac [hisi_sec2] sec_skcipher_crypto+0xf4/0x1d4 [hisi_sec2] sec_skcipher_encrypt+0x1c/0x30 [hisi_sec2] crypto_skcipher_encrypt+0x2c/0x40 crypto_authenc_encrypt+0xc8/0xfc [authenc] crypto_aead_encrypt+0x2c/0x40 echainiv_encrypt+0x144/0x1a0 [echainiv] crypto_aead_encrypt+0x2c/0x40 esp_output_tail+0x348/0x5c0 [esp4] esp_output+0x120/0x19c [esp4] xfrm_output_one+0x25c/0x4d4 xfrm_output_resume+0x6c/0x1fc xfrm_output+0xac/0x3c0 xfrm4_output+0x64/0x130 ip_build_and_send_pkt+0x158/0x20c tcp_v4_send_synack+0xdc/0x1f0 tcp_conn_request+0x7d0/0x994 tcp_v4_conn_request+0x58/0x6c tcp_v6_conn_request+0xf0/0x100 tcp_rcv_state_process+0x1cc/0xd60 tcp_v4_do_rcv+0x10c/0x250 tcp_v4_rcv+0xfc4/0x10a4 ip_protocol_deliver_rcu+0xf4/0x200 ip_local_deliver_finish+0x58/0x70 ip_local_deliver+0x68/0x120 ip_sublist_rcv_finish+0x70/0x94 ip_list_rcv_finish.constprop.0+0x17c/0x1d0 ip_sublist_rcv+0x40/0xb0 ip_list_rcv+0x140/0x1dc __netif_receive_skb_list_core+0x154/0x28c __netif_receive_skb_list+0x120/0x1a0 netif_receive_skb_list_internal+0xe4/0x1f0 napi_complete_done+0x70/0x1f0 gro_cell_poll+0x9c/0xb0 napi_poll+0xcc/0x264 net_rx_action+0xd4/0x21c __do_softirq+0x130/0x358 irq_exit+0x11c/0x13c __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x78/0x2c0 el1_irq+0xb8/0x140 arch_cpu_idle+0x18/0x40 default_idle_call+0x5c/0x1c0 cpuidle_idle_call+0x174/0x1b0 do_idle+0xc8/0x160 cpu_startup_entry+0x30/0x11c secondary_start_kernel+0x158/0x1e4 softirq: huh, entered softirq 3 NET_RX 0000000093774ee4 with preempt_count 00000100, exited with fffffe00? Fixes: 416d82204df4 ("crypto: hisilicon - add HiSilicon SEC V2 driver") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-08crypto: hisilicon/sec - fix inconsistent argumentJianglei Nie1-1/+1
The argument passed to sec_queue_aw_alloc() should be SEC_QUEUE_AW_FROCE_NOALLOC instead of SEC_QUEUE_AR_FROCE_NOALLOC. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-17crypto: hisilicon/sec - only HW V2 needs to change the BD err detectionKai Ye1-7/+8
The base register address of V2 and V3 are different. HW V3 not needs to change the BD err detection. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 11:06:03 +0300