| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add support for up to 4 frequency domains as used on new
platforms.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This way, if there's an issue (in this case a -EPROBE_DEFER), you can
get useful output:
[root@dhcp19-243-150 ~]# cat /sys/kernel/debug/devices_deferred
18591000.cpufreq qcom-cpufreq-hw: Failed to find icc paths
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
|
|
Now that of_cpu_device_node_get() is defined in of.h, of_device.h is just
implicitly including other includes, and is no longer needed. Adjust the
include files with what was implicitly included by of_device.h (cpu.h and
of.h) and drop including of_device.h.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-14-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The OSM/EPSS hardware controls the frequency of each CPU cluster based
on requests from the OS and various throttling events in the system.
While throttling is in effect the related dcvs interrupt will be kept
high. The purpose of the code handling this interrupt is to
continuously report the thermal pressure based on the throttled
frequency.
The reasoning for adding QoS control to this mechanism is not entirely
clear, but the introduction of commit 'c4c0efb06f17 ("cpufreq:
qcom-cpufreq-hw: Add cpufreq qos for LMh")' causes the
scaling_max_frequncy to be set to the throttled frequency. On the next
iteration of polling, the throttled frequency is above or equal to the
newly requested frequency, so the polling is stopped.
With cpufreq limiting the max frequency, the hardware no longer report a
throttling state and no further updates to thermal pressure or qos
state are made.
The result of this is that scaling_max_frequency can only go down, and
the system becomes slower and slower every time a thermal throttling
event is reported by the hardware.
Even if the logic could be improved, there is no reason for software to
limit the max freqency in response to the hardware limiting the max
frequency. At best software will follow the reported hardware state, but
typically it will cause slower backoff of the throttling.
This reverts commit c4c0efb06f17fa4a37ad99e7752b18a5405c76dc.
Fixes: c4c0efb06f17 ("cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh")
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Commit 054a3ef683a1 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data
during probe") moved getting memory resource and iomap from
qcom_cpufreq_hw_cpu_init() to the probe function, however it left
untouched cleanup in qcom_cpufreq_hw_cpu_exit().
During device unbind this will lead to doule release of resource and
double iounmap(), first by qcom_cpufreq_hw_cpu_exit() and second via
managed resources:
resource: Trying to free nonexistent resource <0x0000000018593000-0x0000000018593fff>
Trying to vunmap() nonexistent vm area (0000000088a7d4dc)
...
vunmap (mm/vmalloc.c:2771 (discriminator 1))
iounmap (mm/ioremap.c:60)
devm_ioremap_release (lib/devres.c:19)
devres_release_all (drivers/base/devres.c:506 drivers/base/devres.c:535)
device_unbind_cleanup (drivers/base/dd.c:523)
device_release_driver_internal (drivers/base/dd.c:1248 drivers/base/dd.c:1263)
device_driver_detach (drivers/base/dd.c:1300)
unbind_store (drivers/base/bus.c:243)
drv_attr_store (drivers/base/bus.c:127)
sysfs_kf_write (fs/sysfs/file.c:137)
kernfs_fop_write_iter (fs/kernfs/file.c:334)
vfs_write (include/linux/fs.h:1851 fs/read_write.c:491 fs/read_write.c:584)
ksys_write (fs/read_write.c:637)
__arm64_sys_write (fs/read_write.c:646)
invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57)
el0_svc_common.constprop.0 (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/syscall.c:150)
do_el0_svc (arch/arm64/kernel/syscall.c:194)
el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656)
el0t_64_sync (arch/arm64/kernel/entry.S:591)
Fixes: 054a3ef683a1 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during probe")
Cc: <stable@vger.kernel.org>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
For quite some time, this driver has been performing some quite
low-level DT operations. Simplify that using platform_get_resource.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
|
|
of_device_get_match_data() may return NULL, so add a check to prevent
potential null pointer dereference.
Issue reported by Qualcomm's internal static analysis tool.
Fixes: 4f7961706c63 ("cpufreq: qcom-hw: Move soc_data to struct qcom_cpufreq")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
All but a few drivers ignore the return value of
cpufreq_unregister_driver(). Those few that don't only call it after
cpufreq_register_driver() succeeded, in which case the call doesn't
fail.
Make the function return no value and add a WARN_ON for the case that
the function is called in an invalid situation (i.e. without a previous
successful call to cpufreq_register_driver()).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> # brcmstb-avs-cpufreq.c
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull an ARM cpufreq fix for 6.2-rc8 from Viresh Kumar:
- Fix the incorrect value returned by cpufreq driver's ->get() callback for
Qualcomm platforms (Douglas Anderson).
* tag 'cpufreq-arm-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systems
|
|
On a sc7180-based Chromebook, when I go to
/sys/devices/system/cpu/cpu0/cpufreq I can see:
cpuinfo_cur_freq:2995200
cpuinfo_max_freq:1804800
scaling_available_frequencies:300000 576000 ... 1708800 1804800
scaling_cur_freq:1804800
scaling_max_freq:1804800
As you can see the `cpuinfo_cur_freq` is bogus. It turns out that this
bogus info started showing up as of commit c72cf0cb1d77 ("cpufreq:
qcom-hw: Fix the frequency returned by cpufreq_driver->get()"). That
commit seems to assume that everyone is on the LMH bandwagon, but
sc7180 isn't.
Let's go back to the old code in the case where LMH isn't used.
Fixes: c72cf0cb1d77 ("cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
[ Viresh: Fixed the 'fixes' tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Commit 054a3ef683a1 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during
probe") assumed that every reg variable is 4*u32 wide (as most new qcom
SoCs set #address- and #size-cells to <2>. That is not the case for all of
them though. Check the cells values dynamically to ensure the proper
region of the DTB is being read.
Fixes: 054a3ef683a1 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during probe")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Qcom CPUFreq hardware (EPSS/OSM) controls clock and voltage to the CPU
cores. But this relationship is not represented with the clk framework
so far.
So, let's make the qcom-cpufreq-hw driver a clock provider. This makes the
clock producer/consumer relationship cleaner and is also useful for CPU
related frameworks like OPP to know the frequency at which the CPUs are
running.
The clock frequency provided by the driver is for each frequency domain.
We cannot get the frequency of each CPU core because, not all platforms
support per-core DCVS feature.
Also the frequency supplied by the driver is the actual frequency that
comes out of the EPSS/OSM block after the DCVS operation. This frequency is
not same as what the CPUFreq framework has set but it is the one that gets
supplied to the CPUs after throttling by LMh.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Xiu: Fixed memleak. ]
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The cpufreq_driver->get() callback is supposed to return the current
frequency of the CPU and not the one requested by the CPUFreq core.
Fix it by returning the frequency that gets supplied to the CPU after
the DCVS operation of EPSS/OSM.
Fixes: 2849dd8bc72b ("cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver")
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
If "cpu_dev" fails to get opp table in qcom_cpufreq_hw_read_lut(),
the program will return, resulting in "table" resource is not released.
Fixes: 51c843cf77bb ("cpufreq: qcom: Update the bandwidth levels on frequency change")
Signed-off-by: Chen Hui <judy.chenhui@huawei.com>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
soc_data is a static info of the driver and thus no need to cache it inside
the qcom_cpufreq_data struct which is allocated per frequency domain. So,
move it inside qcom_cpufreq struct.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
There are multiple instances of dev pointer used in the probe() function.
Instead of referencing pdev->dev all the time, let's use a cached dev
pointer to simplify the code.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
qcom_cpufreq_data is allocated based on the number of frequency domains
defined in DT which is static and won't change during runtime. There is
no real reason to allocate it during the CPU init() callback and deallocate
it during exit(). Hence, move the allocation to probe() and use the
allocated memory during init().
This also allows us to use devm_platform_get_and_ioremap_resource() helper
for acquiring the freq-domain resources from DT.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
CPUFreq core will always set the "policy->cpus" bitmask with the bitfield
of the CPU that goes first per domain/policy. So there is no way the
"policy->cpus" bitmask will be empty during qcom_cpufreq_hw_cpu_init().
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Before update thermal pressure, the max cpufreq should be limited.
Add QOS control for Lmh throttle cpufreq.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Commit 6240aaad75e1 was supposed to drop the reference count to the OPP,
instead it avoided more stuff if the OPP isn't found. This isn't
entirely correct. We already have a frequency value available, we just
couldn't align it with an OPP in case of IS_ERR(opp).
Lets continue with updating thermal pressure, etc, even if we aren't
able to find an OPP here.
This fixes warning generated by the 'smatch' tool.
Fixes: 6240aaad75e1 ("cpufreq: qcom-hw: fix the opp entries refcounting")
Cc: v5.18+ <stable@vger.kernel.org> # v5.18+
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
commit 65c7cdedeb30 ("genirq: Provide new interfaces for affinity hints")
deprecates irq_set_affinity_hint(). Use the new
irq_set_affinity_and_hint() instead.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
If LMH (Limits Management Hardware) is available, when a policy is
disabled by unplugging the last online CPU of policy->cpus, the LMH
irq is left enabled.
When the policy is re-enabled with any of the CPU in policy->cpus
being plugged in, qcom_cpufreq_ready() re-enables the irq. This
triggers the following warning:
[ 379.160106] Unbalanced enable for IRQ 154
[ 379.160120] WARNING: CPU: 7 PID: 48 at kernel/irq/manage.c:774 __enable_irq+0x84/0xc0
Thus disable the irq.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
If LMH (Limits Management Hardware) is available, when a policy is
disabled by unplugging the last online CPU of policy->cpus,
qcom_cpufreq_hw_cpu_offline() sets cancel_throttle=true.
cancel_throttle is not reset when the policy is re-enabled with any
of the CPU in policy->cpus being plugged in. So reset it.
This patch also adds an early exit check.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
HZ macros has been centralized in units.h since [1]. Use it to avoid
duplicated definition.
[1] commit e2c77032fcbe ("units: add the HZ macros")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Offlining cpu6 and cpu7 and then onlining cpu6 hangs on
sc7180-trogdor-lazor because the throttle interrupt doesn't exist.
Similarly, things go sideways when suspend/resume runs. That's because
the qcom_cpufreq_hw_cpu_online() and qcom_cpufreq_hw_lmh_exit()
functions are calling genirq APIs with an interrupt value of '-6', i.e.
-ENXIO, and that isn't good.
Check the value of the throttle interrupt like we already do in other
functions in this file and bail out early from lmh code to fix the hang.
Reported-by: Rob Clark <robdclark@chromium.org>
Cc: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: a1eb080a0447 ("cpufreq: qcom-hw: provide online/offline operations")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
It's noted that dcvs interrupts are not self-clearing, thus an interrupt
handler runs constantly, which leads to a severe regression in runtime.
To fix the problem an explicit write to clear interrupt register is
required, note that on OSM platforms the register may not be present.
Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
On QCOM platforms with EPSS flavour of cpufreq IP a throttled frequency is
obtained from another register REG_DOMAIN_STATE, thus the helper function
qcom_lmh_get_throttle_freq() should be modified accordingly, as for now
it returns gibberish since .reg_current_vote is unset for EPSS hardware.
To exclude a hardcoded magic number 19200 it is replaced by "xo" clock rate
in KHz.
Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Provide lightweight online and offline operations. This saves us from
parsing and tearing down the OPP tables each time the CPU is put online
or offline.
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The qcom_lmh_dcvs_notify() will get the dev_pm_opp instance for
throttling, but will not put it, ending up with leaking a reference
count and the following backtrace when putting the CPU offline.
Correctly put the reference count of the returned opp instance.
[ 84.418025] ------------[ cut here ]------------
[ 84.422770] WARNING: CPU: 7 PID: 43 at drivers/opp/core.c:1396 _opp_table_kref_release+0x188/0x190
[ 84.431966] Modules linked in:
[ 84.435106] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S 5.17.0-rc6-00388-g7cf3c0d89c44-dirty #721
[ 84.451631] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
[ 84.458781] pc : _opp_table_kref_release+0x188/0x190
[ 84.463878] lr : _opp_table_kref_release+0x78/0x190
[ 84.468885] sp : ffff80000841bc70
[ 84.472294] x29: ffff80000841bc70 x28: ffff6664afe3d000 x27: ffff1db6729e5908
[ 84.479621] x26: 0000000000000000 x25: 0000000000000000 x24: ffff1db6729e58e0
[ 84.486946] x23: ffff8000080a5000 x22: ffff1db40aad80e0 x21: ffff1db4002fec80
[ 84.494277] x20: ffff1db40aad8000 x19: ffffb751c3186300 x18: ffffffffffffffff
[ 84.501603] x17: 5300326563697665 x16: 645f676e696c6f6f x15: 00001186c1df5448
[ 84.508928] x14: 00000000000002e9 x13: 0000000000000000 x12: 0000000000000000
[ 84.516256] x11: ffffb751c3186368 x10: ffffb751c39a2a70 x9 : 0000000000000000
[ 84.523585] x8 : ffff1db4008edf00 x7 : ffffb751c328c000 x6 : 0000000000000001
[ 84.530916] x5 : 0000000000040000 x4 : 0000000000000001 x3 : ffff1db4008edf00
[ 84.538247] x2 : 0000000000000000 x1 : ffff1db400aa6100 x0 : ffff1db40aad80d0
[ 84.545579] Call trace:
[ 84.548101] _opp_table_kref_release+0x188/0x190
[ 84.552842] dev_pm_opp_remove_all_dynamic+0x8c/0xc0
[ 84.557949] qcom_cpufreq_hw_cpu_exit+0x30/0xdc
[ 84.562608] cpufreq_offline.isra.0+0x1b4/0x1d8
[ 84.567270] cpuhp_cpufreq_offline+0x10/0x6c
[ 84.571663] cpuhp_invoke_callback+0x16c/0x2b0
[ 84.576231] cpuhp_thread_fun+0x190/0x250
[ 84.580353] smpboot_thread_fn+0x12c/0x230
[ 84.584568] kthread+0xfc/0x100
[ 84.587810] ret_from_fork+0x10/0x20
[ 84.591490] irq event stamp: 3482
[ 84.594901] hardirqs last enabled at (3481): [<ffffb751c13c3db0>] call_rcu+0x39c/0x50c
[ 84.603119] hardirqs last disabled at (3482): [<ffffb751c236b518>] el1_dbg+0x24/0x8c
[ 84.611074] softirqs last enabled at (310): [<ffffb751c1290410>] _stext+0x410/0x588
[ 84.619028] softirqs last disabled at (305): [<ffffb751c131bf68>] __irq_exit_rcu+0x158/0x174
[ 84.627691] ---[ end trace 0000000000000000 ]---
Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The driver would disable the worker when cpu is being put offline, but
it happens closer to the end of cpufreq_offline(). The function
qcom_lmh_dcvs_poll() can be running in parallel with this, when
policy->cpus already has been updated. Read policy->related_cpus
instead.
[ 37.122433] ------------[ cut here ]------------
[ 37.127225] WARNING: CPU: 0 PID: 187 at drivers/base/arch_topology.c:180 topology_update_thermal_pressure+0xec/0x100
[ 37.138098] Modules linked in:
[ 37.141279] CPU: 0 PID: 187 Comm: kworker/0:3 Tainted: G S 5.17.0-rc6-00389-g37c83d0b8710-dirty #713
[ 37.158306] Workqueue: events qcom_lmh_dcvs_poll
[ 37.163095] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 37.170278] pc : topology_update_thermal_pressure+0xec/0x100
[ 37.176131] lr : topology_update_thermal_pressure+0x20/0x100
[ 37.181977] sp : ffff800009b6bce0
[ 37.185402] x29: ffff800009b6bce0 x28: ffffd87abe92b000 x27: ffff04bd7292e205
[ 37.192792] x26: ffffd87abe930af8 x25: ffffd87abe94e4c8 x24: 0000000000000000
[ 37.200180] x23: ffff04bb01177018 x22: ffff04bb011770c0 x21: ffff04bb01177000
[ 37.207567] x20: ffff04bb0a419000 x19: 00000000000c4e00 x18: 0000000000000000
[ 37.214954] x17: 000000040044ffff x16: 004000b2b5503510 x15: 0000006aaa1326d2
[ 37.222333] x14: 0000000000000232 x13: 0000000000000001 x12: 0000000000000040
[ 37.229718] x11: ffff04bb00400000 x10: 968f57bd39f701c8 x9 : ffff04bb0acc8674
[ 37.237095] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffffd87abd90092c
[ 37.244478] x5 : 0000000000000016 x4 : 0000000000000000 x3 : 0000000000000100
[ 37.251852] x2 : ffff04bb0a419020 x1 : 0000000000000100 x0 : 0000000000000100
[ 37.259235] Call trace:
[ 37.261771] topology_update_thermal_pressure+0xec/0x100
[ 37.267266] qcom_lmh_dcvs_poll+0xbc/0x154
[ 37.271505] process_one_work+0x288/0x69c
[ 37.275654] worker_thread+0x74/0x470
[ 37.279450] kthread+0xfc/0x100
[ 37.282712] ret_from_fork+0x10/0x20
[ 37.286417] irq event stamp: 74
[ 37.289664] hardirqs last enabled at (73): [<ffffd87abdd78af4>] _raw_spin_unlock_irq+0x44/0x80
[ 37.298632] hardirqs last disabled at (74): [<ffffd87abdd71fc0>] __schedule+0x710/0xa10
[ 37.306885] softirqs last enabled at (58): [<ffffd87abcc90410>] _stext+0x410/0x588
[ 37.314778] softirqs last disabled at (51): [<ffffd87abcd1bf68>] __irq_exit_rcu+0x158/0x174
[ 37.323386] ---[ end trace 0000000000000000 ]---
Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Drop affinity hint before freeing the throttling IRQ to fix the
following trace:
[ 185.114773] ------------[ cut here ]------------
[ 185.119517] WARNING: CPU: 7 PID: 43 at kernel/irq/manage.c:1887 free_irq+0x3a4/0x3dc
[ 185.127474] Modules linked in:
[ 185.130618] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S W 5.17.0-rc6-00386-g67382a5b705d-dirty #690
[ 185.147125] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 185.154269] pc : free_irq+0x3a4/0x3dc
[ 185.158031] lr : free_irq+0x33c/0x3dc
[ 185.161792] sp : ffff80000841bc90
[ 185.165195] x29: ffff80000841bc90 x28: ffffa6edc5c3d000 x27: ffff6d93729e5908
[ 185.172515] x26: 0000000000000000 x25: ffff6d910109fc00 x24: ffff6d91011490e0
[ 185.179838] x23: ffff6d9101149218 x22: 0000000000000080 x21: 0000000000000000
[ 185.187163] x20: ffff6d9101149000 x19: ffff6d910ab61500 x18: ffffffffffffffff
[ 185.194487] x17: 2e35202020202020 x16: 2020202020202020 x15: ffff80008841b9a7
[ 185.201805] x14: 00000000000003c9 x13: 0000000000000001 x12: 0000000000000040
[ 185.209135] x11: ffff6d91005aab58 x10: ffff6d91005aab5a x9 : ffffc6a5ad1c5408
[ 185.216455] x8 : ffff6d91005adb88 x7 : 0000000000000000 x6 : ffffc6a5ab5a91f4
[ 185.223776] x5 : 0000000000000000 x4 : ffff6d91011490a8 x3 : ffffc6a5ad266108
[ 185.231098] x2 : 0000000013033204 x1 : ffff6d9101149000 x0 : ffff6d910a9cc000
[ 185.238421] Call trace:
[ 185.240932] free_irq+0x3a4/0x3dc
[ 185.244334] qcom_cpufreq_hw_cpu_exit+0x78/0xcc
[ 185.248985] cpufreq_offline.isra.0+0x228/0x270
[ 185.253639] cpuhp_cpufreq_offline+0x10/0x20
[ 185.258027] cpuhp_invoke_callback+0x16c/0x2b0
[ 185.262592] cpuhp_thread_fun+0x190/0x250
[ 185.266710] smpboot_thread_fn+0x12c/0x230
[ 185.270914] kthread+0xfc/0x100
[ 185.274145] ret_from_fork+0x10/0x20
[ 185.277820] irq event stamp: 212
[ 185.281136] hardirqs last enabled at (211): [<ffffc6a5ac57973c>] _raw_spin_unlock_irqrestore+0x8c/0xa0
[ 185.290775] hardirqs last disabled at (212): [<ffffc6a5ac572100>] __schedule+0x710/0xa10
[ 185.299081] softirqs last enabled at (0): [<ffffc6a5ab50f7b0>] copy_process+0x7d0/0x1a14
[ 185.307475] softirqs last disabled at (0): [<0000000000000000>] 0x0
Fixes: 3ed6dfbd3bb98 ("cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts")
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The OSM and EPSS hardware controls the frequency of each cluster in the
system based on requests from the OS and various limiting factors, such
as input from LMH.
In most systems the vote from the OS is done using a single register per
cluster, but some systems are configured to instead take one request per
core. In this configuration a set of consecutive registers are used for
the OS to request the frequency of each of the cores within the cluster.
The information is then aggregated in the hardware and the frequency for
the cluster is determined.
As the current implementation ends up only requesting a frequency for
the first core in each cluster and only the vote of non-idle cores are
considered it's often the case that the cluster will be clocked (much)
lower than expected.
It's possible that there are benefits of performing the per-core
requests from the OS, but more investigation of the outcome is needed
before introducing such support. As such this patch extends the request
for the cluster to be written to all the cores.
The weight of the policy's related_cpus is used to determine how many
cores, and hence consecutive registers, each cluster has.
The OS is not permitted to disable the per-core dcvs feature.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
drivers/cpufreq calls cpumask_weight() to check if any bit of a given
cpumask is set. We can do it more efficiently with cpumask_empty() because
cpumask_empty() stops traversing the cpumask as soon as it finds first set
bit, while cpumask_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> (for SCMI cpufreq driver)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
In the event that the SoC is under thermal pressure while booting it's
possible for the dcvs notification to happen inbetween the cpufreq
framework calling init and it actually updating the policy's
related_cpus cpumask.
Prior to the introduction of the thermal pressure update helper an empty
cpumask would simply result in the thermal pressure of no cpus being
updated, but the new code will attempt to dereference an invalid per_cpu
variable.
Avoid this problem by using the newly reintroduced "ready" callback, to
postpone enabling the IRQ until the related_cpus cpumask is filled in.
Fixes: 0258cb19c77d ("cpufreq: qcom-cpufreq-hw: Use new thermal pressure update function")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Use platform_get_irq_optional() to avoid a noisy error message when the
irq isn't specified. The irq is definitely optional given that we only
care about errors that are -EPROBE_DEFER here.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
In runtime CPU cluster specific dcvsh interrupts may be handled on
unrelated CPU cores, it leads to an issue of too excessive number of
received and handled interrupts, but this is not observed, if CPU
affinity of the interrupt handler is set in accordance to CPU clusters.
The change reduces a number of received interrupts in about 10-100 times.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Re-enabling an interrupt from its own interrupt handler may cause
an interrupt storm, if there is a pending interrupt and because its
handling is disabled due to already done entrance into the handler
above in the stack.
Also, apparently it is improper to lock a mutex in an interrupt contex.
Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Registering an IRQ requires the string buffer containing the name to
remain allocated, as the name is not copied into another buffer.
So let's add a irq_name field to the data struct instead, which is
guaranteed to have the appropriate lifetime.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Thermal pressure provides a new API, which allows to use CPU frequency
as an argument. That removes the need of local conversion to capacity.
Use this new API and remove old local conversion code.
The new arch_update_thermal_pressure() also accepts boost frequencies,
which solves issue in the driver code with wrong reduced capacity
calculation. The reduced capacity was calculated wrongly due to
'policy->cpuinfo.max_freq' used as a divider. The value present there was
actually the boost frequency. Thus, even a normal maximum frequency value
which corresponds to max CPU capacity (arch_scale_cpu_capacity(cpu_id))
is not able to remove the capping.
The second side effect which is solved is that the reduced frequency wasn't
properly translated into the right reduced capacity,
e.g.
boost frequency = 3000MHz (stored in policy->cpuinfo.max_freq)
max normal frequency = 2500MHz (which is 1024 capacity)
2nd highest frequency = 2000MHz (which translates to 819 capacity)
Then in a scenario when the 'throttled_freq' max allowed frequency was
2000MHz the driver translated it into 682 capacity:
capacity = 1024 * 2000 / 3000 = 682
Then set the pressure value bigger than actually applied by the HW:
max_capacity - capacity => 1024 - 682 = 342 (<- thermal pressure)
Which was causing higher throttling and misleading task scheduler
about available CPU capacity.
A proper calculation in such case should be:
capacity = 1024 * 2000 / 2500 = 819
1024 - 819 = 205 (<- thermal pressure)
This patch relies on the new arch_update_thermal_pressure() handling
correctly such use case (with boost frequencies).
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The thermal pressure signal gives information to the scheduler about
reduced CPU capacity due to thermal. It is based on a value stored in
a per-cpu 'thermal_pressure' variable. The online CPUs will get the
new value there, while the offline won't. Unfortunately, when the CPU
is back online, the value read from per-cpu variable might be wrong
(stale data). This might affect the scheduler decisions, since it
sees the CPU capacity differently than what is actually available.
Fix it by making sure that all online+offline CPUs would get the
proper value in their per-cpu variable when there is throttling
or throttling is removed.
Fixes: 275157b367f479 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
As remote cpufreq updates are supported on QCOM platforms, set
dvfs_possible_from_any_cpu cpufreq driver flag.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add interrupt support to notify the kernel of h/w initiated frequency
throttling by LMh. Convey this to scheduler via thermal presssure
interface.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
[Viresh: Added changes for arch_topology.c to fix build errors ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
In case of error, the function ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: 67fc209b527d ("cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Commit 67fc209b527d ("cpufreq: qcom-hw: drop devm_xxx() calls from
init/exit hooks") introduces an issue of dereferencing freed memory
'data'. Fix it.
Fixes: 67fc209b527d ("cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
* pm-cpufreq:
cpufreq: Fix typo in kerneldoc comment
cpufreq: schedutil: Remove update_lock comment from struct sugov_policy definition
cpufreq: schedutil: Remove needless sg_policy parameter from ignore_dl_rate_limit()
cpufreq: ACPI: Set cpuinfo.max_freq directly if max boost is known
cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks
* pm-opp:
opp: Don't skip freq update for different frequency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq fix for 5.12 from Viresh Kumar:
"Single patch to fix issue with cpu hotplug and policy recreation for
qcom-cpufreq-hw driver."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks
|
