summaryrefslogtreecommitdiff
path: root/drivers/cpufreq/cpufreq-dt-platdev.c
AgeCommit message (Collapse)AuthorFilesLines
2020-04-28cpufreq: dt: Add support for r8a7742Lad Prabhakar1-0/+1
Add the compatible strings for supporting the generic cpufreq driver on the Renesas RZ/G1H (R8A7742) SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-04-28cpufreq: Add i.MX7ULP to cpufreq-dt-platdev blacklistPeng Fan1-0/+1
Add i.MX7ULP to cpufreq-dt-platdev blacklist. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-03-20cpufreq: qcom: Add support for krait based socsAnsuel Smith1-0/+5
In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974 that has KRAIT processors the voltage/current value of each OPP varies based on the silicon variant in use. The required OPP related data is determined based on the efuse value. This is similar to the existing code for kryo cores. So adding support for krait cores here. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-01-07cpufreq: Use imx-cpufreq-dt for i.MX8MP's speed gradingAnson Huang1-0/+1
Add i.MX8MP to blacklist, so that imx-cpufreq-dt driver can handle speed grading bits just like other i.MX8M SoCs. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-12-16cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCsDmitry Osipenko1-0/+2
Both NVIDIA Tegra20 and Tegra30 SoCs should be blacklisted because CPU OPPs use supported_hw and thus platdev isn't suitable for these SoCs. Currently cpufreq-dt driver produces a bit annoying warning splats during boot because valid OPPs are not found, this will be fixed once tegra20-cpufreq driver will be update to support cpufreq-dt. The warnings will also happen on older stable kernels using newer device-trees, thus this patch should be backported to stable kernels as well. Cc: <stable@vger.kernel.org> Reported-by: Jon Hunter <jonathanh@nvidia.com> Fixes: 4053aa65c517 ("ARM: tegra: cardhu-a04: Add CPU Operating Performance Points") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-12-05Merge branch 'thermal/next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal management updates from Zhang Rui: - Fix a deadlock regression in thermal core framework, which was introduced in 5.3 (Wei Wang) - Initialize thermal control framework earlier to enable thermal mitigation during boot (Amit Kucheria) - Convert the Intelligent Power Allocator (IPA) thermal governor to follow the generic PM_EM instead of its own Energy Model (Quentin Perret) - Introduce a new Amlogic soc thermal driver (Guillaume La Roque) - Add interrupt support for tsens thermal driver (Amit Kucheria) - Add support for MSM8956/8976 in tsens thermal driver (AngeloGioacchino Del Regno) - Add support for r8a774b1 in rcar thermal driver (Biju Das) - Add support for Thermal Monitor Unit v2 in qoriq thermal driver (Yuantian Tang) - Some other fixes/cleanups on thermal core framework and soc thermal drivers (Colin Ian King, Daniel Lezcano, Hsin-Yi Wang, Tian Tao) * 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (32 commits) thermal: Fix deadlock in thermal thermal_zone_device_check thermal: cpu_cooling: Migrate to using the EM framework thermal: cpu_cooling: Make the power-related code depend on IPA PM / EM: Declare EM data types unconditionally arm64: defconfig: Enable CONFIG_ENERGY_MODEL drivers: thermal: tsens: fix potential integer overflow on multiply thermal: cpu_cooling: Reorder the header file thermal: cpu_cooling: Remove pointless dependency on CONFIG_OF thermal: no need to set .owner when using module_platform_driver thermal: qcom: tsens-v1: Fix kfree of a non-pointer value cpufreq: qcom-hw: Move driver initialization earlier clk: qcom: Initialize clock drivers earlier cpufreq: Initialize cpufreq-dt driver earlier cpufreq: Initialize the governors in core_initcall thermal: Initialize thermal subsystem earlier thermal: Remove netlink support dt: thermal: tsens: Document compatible for MSM8976/56 thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976 MAINTAINERS: add entry for Amlogic Thermal driver thermal: amlogic: Add thermal driver to support G12 SoCs ...
2019-11-07cpufreq: Initialize cpufreq-dt driver earlierAmit Kucheria1-1/+1
This allows HW drivers that depend on cpufreq-dt to initialize earlier. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/353c745d4ca1feff600bd44154c01c013f185ca4.1571656015.git.amit.kucheria@linaro.org
2019-10-10ARM: dts: omap34xx & omap36xx: replace opp-v1 tables by opp-v2 forH. Nikolaus Schaller1-1/+1
With the driver installed, we can change the opp-v1 table format to opp-v2. In addition, move omap3 from whitelist to blacklist in cpufreq-dt-platdev in the same patch, because doing either first breaks operation and may make trouble in bisect. We also can remove opp-v1 table for omap3-n950-n9 since its 1GHz capability is now automatically detected. We also fix a wrong OPP4 voltage for omap3430 which must be 0.6V + 54*12.5mV = 1275mV. Otherwise the twl4030 driver will reject this OPP. Note: the high speed OPPs that were not available in the opp-v1 tables are tagged "turbo-mode;" which means they are not automatically activated by the govenors or cpu-freq. To enable you have to write echo 1 >/sys/devices/system/cpu/cpufreq/boost Note: to hard disable an OPP in a board.dts file use e.g. &cpu0_opp_table: { /delete-node/ opp1g-1000000000; /* do not use */ }; or alternatively: &cpu0_opp_table: { opp1g-1000000000 { status = "disabled"; /* do not use */ }; }; Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-09-03Merge branch 'cpufreq/qcom-updates' into cpufreq/arm/linux-nextViresh Kumar1-0/+1
2019-09-03cpufreq: Add qcs404 to cpufreq-dt-platdev blacklistJorge Ramirez-Ortiz1-0/+1
Add qcs404 to cpufreq-dt-platdev blacklist. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-08-22cpufreq: mediatek: Add support for mt8183Andrew-sh.Cheng1-0/+1
Add compatible string for mediatek mt8183 Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com> [ VK: Fixed rebase conflict ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-08-22cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed gradingAnson Huang1-0/+1
Add i.MX8MN to blacklist, so that imx-cpufreq-dt driver can handle speed grading bits just like other i.MX8M SoCs. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-07-22cpufreq: Add sun50i nvmem based CPU scaling driverYangtao Li1-0/+2
For some SoCs, the CPU frequency subset and voltage value of each OPP varies based on the silicon variant in use. The sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to provide the OPP framework with required information. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-07-08Merge branch 'pm-cpufreq'Rafael J. Wysocki1-1/+4
* pm-cpufreq: cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update() cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get() cpufreq: Don't skip frequency validation for has_target() drivers cpufreq: Use has_target() instead of !setpolicy cpufreq: Remove redundant !setpolicy check cpufreq: Move the IS_ENABLED(CPU_THERMAL) macro into a stub cpufreq: s5pv210: Don't flood kernel log after cpufreq change cpufreq: pcc-cpufreq: Fail initialization if driver cannot be registered cpufreq: add driver for Raspberry Pi cpufreq: Switch imx7d to imx-cpufreq-dt for speed grading cpufreq: imx-cpufreq-dt: Remove global platform match list cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency cpufreq: brcmstb-avs-cpufreq: Fix initial command check cpufreq: armada-37xx: Remove set but not used variable 'freq' cpufreq: imx-cpufreq-dt: Fix no OPPs available on unfused parts dt-bindings: imx-cpufreq-dt: Document opp-supported-hw usage cpufreq: Add imx-cpufreq-dt driver
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-06cpufreq: Switch imx7d to imx-cpufreq-dt for speed gradingLeonard Crestez1-1/+1
This driver can handle speed grading bits on imx7d just like on imx8mq and imx8mm. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-05-20cpufreq: Add imx-cpufreq-dt driverLeonard Crestez1-0/+3
Right now in upstream imx8m cpufreq support just lists a common subset of OPPs because the higher ones should only be attempted after checking speed grading in fuses. Add a small driver which checks speed grading from nvmem cells before registering cpufreq-dt. This driver allows unlocking all frequencies for imx8mm and imx8mq and could be applied to other chips like imx7d Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-02-06cpufreq: dt-platdev: add Tegra210 to blacklistJoseph Lo1-0/+1
Tegra210 uses "tegra124-cpufreq" platform driver to register device data for "cpufreq-dt" driver. So add it in the blacklist for "cpufreq-dt-platdev" driver to drop that. Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-pm@vger.kernel.org Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-10-08cpufreq: dt-platdev: allow RK3399 to have separate tunables per clusterDmitry Torokhov1-1/+4
RK3899 has one cluster with 4 small cores, and another one with 2 big cores, with cores in different clusters having different OPPs and thus needing separate set of tunables. Let's enable this via "have_governor_per_policy" platform data. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-09-17cpufreq: dt: Add support for r8a7744Biju Das1-0/+1
Add the compatible strings for supporting the generic cpufreq driver on the Renesas RZ/G1N (R8A7744) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-30cpufreq: Add Kryo CPU scaling driverIlia Lin1-0/+3
In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors, the CPU frequency subset and voltage value of each OPP varies based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables defines the voltage and frequency value based on the msm-id in SMEM and speedbin blown in the efuse combination. The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC to provide the OPP framework with required information. This is used to determine the voltage and frequency value for each OPP of operating-points-v2 table when it is parsed by the OPP framework. Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15Revert "cpufreq: rcar: Add support for R8A7795 SoC"Simon Horman1-1/+0
This reverts commit 034def597bb73cbf29ffade7d8aec8408af8c743. This is no longer needed since the following commit and to the best of my knowledge is not relied on by any upstream DTS: edeec420de24 (cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2) Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15Revert "cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver"Simon Horman1-1/+0
This reverts commit bea2ebca6b917e46d0c585f416f1326fdf41e69b. This is no longer needed since the following commit and to the best of my knowledge is not relied on by any upstream DTS: edeec420de24 (cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2) Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-13cpufreq: mediatek: add mediatek related projects into blacklistAndrew-sh Cheng1-0/+8
mediatek projects will use mediate-cpufreq.c as cpufreq driver, instead of using cpufreq_dt.c Add mediatek related projects into cpufreq-dt blacklist Signed-off-by: Andrew-sh Cheng <andrew-sh.cheng@mediatek.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-11cpufreq: dt: Remove support for Exynos4212 SoCsMarek Szyprowski1-1/+0
Support for Exynos4212 SoCs has been removed by commit bca9085e0ae9 "ARM: dts: exynos: remove Exynos4212 support (dead code)", so there is no need to keep remaining dead code related to this SoC version. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-03cpufreq: dt-platdev: drop socionext,uniphier-ld6b from whitelistMasahiro Yamada1-2/+0
As you see arch/arm/boot/dts/uniphier-ld6b.dtsi, it includes uniphier-pxs2.dtsi, which uses "operating-points-v2" property and whose cpufreq device is automatically created. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-26cpufreq: dt: Fix sysfs duplicate filename creation for platform-deviceSuniel Mahesh1-0/+4
ti-cpufreq and cpufreq-dt-platdev drivers are registering platform-device with same name "cpufreq-dt" using platform_device_register_*() routines. This is leading to build warnings appended below. Providing hardware information to OPP framework along with the platform- device creation should be done by ti-cpufreq driver before cpufreq-dt driver comes into place. This patch add's TI am33xx, am43 and dra7 platforms (which use opp-v2 property) to the blacklist of devices in cpufreq-dt-platform driver to avoid creating platform-device twice and remove build warnings. [ 2.370167] ------------[ cut here ]------------ [ 2.375087] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x58/0x78 [ 2.383112] sysfs: cannot create duplicate filename '/devices/platform/cpufreq-dt' [ 2.391219] Modules linked in: [ 2.394506] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-next-20170912 #1 [ 2.402006] Hardware name: Generic AM33XX (Flattened Device Tree) [ 2.408437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14) [ 2.416568] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0) [ 2.424165] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104) [ 2.431488] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44) [ 2.439351] [<c01374d0>] (warn_slowpath_fmt) from [<c03459d0>] (sysfs_warn_dup+0x58/0x78) [ 2.447938] [<c03459d0>] (sysfs_warn_dup) from [<c0345ab8>] (sysfs_create_dir_ns+0x80/0x98) [ 2.456719] [<c0345ab8>] (sysfs_create_dir_ns) from [<c082c554>] (kobject_add_internal+0x9c/0x2d4) [ 2.466124] [<c082c554>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c) [ 2.474712] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c) [ 2.482489] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220) [ 2.491085] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118) [ 2.501305] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c) [ 2.511253] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170) [ 2.519838] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4) [ 2.528974] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110) [ 2.537565] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c) [ 2.545981] ---[ end trace 2fc00e213c13ab20 ]--- [ 2.551051] ------------[ cut here ]------------ [ 2.555931] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x254/0x2d4 [ 2.564578] kobject_add_internal failed for cpufreq-dt with -EEXIST, don't try to register things with the same name in the same directory. [ 2.577977] Modules linked in: [ 2.581261] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.13.0-next-20170912 #1 [ 2.590013] Hardware name: Generic AM33XX (Flattened Device Tree) [ 2.596437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14) [ 2.604573] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0) [ 2.612172] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104) [ 2.619494] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44) [ 2.627362] [<c01374d0>] (warn_slowpath_fmt) from [<c082c70c>] (kobject_add_internal+0x254/0x2d4) [ 2.636666] [<c082c70c>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c) [ 2.645255] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c) [ 2.653027] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220) [ 2.661615] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118) [ 2.671833] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c) [ 2.681779] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170) [ 2.690377] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4) [ 2.699510] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110) [ 2.708106] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c) [ 2.716217] ---[ end trace 2fc00e213c13ab21 ]--- Fixes: edeec420de24 (cpufreq: dt-cpufreq: platdev Automatically create device with OPP v2) Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-20cpufreq: dt-platdev: Add some missing platforms to the blacklistViresh Kumar1-0/+12
Commit edeec420de24 (cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2) missed adding few platforms to the blacklist which create the cpufreq-dt device from their own drivers, after some dependencies are sorted out. And for those platforms, both the platform specific driver and the cpufreq-dt-platdev driver try to create the cpufreq-dt device now. Fix that by including those platforms in the blacklist. This doesn't include the TI platforms, for which there is a separate patch. Fixes: edeec420de24 (cpufreq: dt-cpufreq: platdev Automatically create device with OPP v2) Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25cpufreq: dt-platdev: Drop few entries from whitelistViresh Kumar1-11/+0
Drop few ARM (32 and 64 bit) platforms from the whitelist which always use "operating-points-v2" property from their DT. They should continue to work after this patch. Tested on Hikey platform (only the "hisilicon,hi6220" entry). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2Viresh Kumar1-5/+40
The initial idea of creating the cpufreq-dt-platdev.c file was to keep a list of platforms that use the "operating-points" (V1) bindings and create cpufreq device for them only, as we weren't sure which platforms would want the device to get created automatically as some had their own cpufreq drivers as well, or wanted to initialize cpufreq after doing some stuff from platform code. But that wasn't the case with platforms using "operating-points-v2" property. We wanted the device to get created automatically without the need of adding them to the whitelist. Though, we will still have some exceptions where we don't want to create the device automatically. Rename the earlier platform list as *whitelist* and create a new *blacklist* as well. The cpufreq-dt device will get created if: - The platform is there in the whitelist OR - The platform has "operating-points-v2" property in CPU0's DT node and isn't part of the blacklist . Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18cpufreq: enable the DT cpufreq driver on the Ux500Linus Walleij1-0/+5
This enables the generic DT and OPP-based cpufreq driver on the ST-Ericsson Ux500 series. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18cpufreq: dt: Add r8a7796 support to to use generic cpufreq driverKhiem Nguyen1-0/+1
This patch adds the r8a7796 support the generic cpufreq driver by adding an appropriate compat string. This is in keeping with support for other Renesas ARM and arm64 based SoCs. Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com> [simon: new changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-08cpufreq: rcar: Add support for R8A7795 SoCKhiem Nguyen1-0/+1
After the commit "a399dc9fc50 cpufreq: shmobile: Use generic platdev driver", will use cpufreq-dt-platdev driver to enable cpufreq-dt support. Hence, follow the implementation to support new R8A7795 SoC. Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-04cpufreq: dt: Add rk3328 compatible to use generic cpufreq driverFinley Xiao1-0/+1
This patch adds the rk3328 compatible string for supporting the generic cpufreq driver on RK3328. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22cpufreq: dt: Don't use generic platdev driver for tangoMarc Gonzalez1-2/+0
On tango platforms, firmware configures the CPU clock, and Linux is then only allowed to use the cpu_clk_divider to change the frequency. Build the OPP table dynamically at init, in order to support whatever firmware throws at us. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-16cpufreq: dt: Add zynqmp to the cpufreq dt platdevShubhrajyoti Datta1-0/+1
Add zynqmp to the cpufreq dt platform device. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24cpufreq: dt: Add support for hi3660Tao Wang1-0/+1
Add the compatible string for supporting the generic device tree cpufreq-dt driver on Hisilicon's 3660 SoC. Signed-off-by: Tao Wang <kevin.wangtao@hisilicon.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-10cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platformsDave Gerlach1-2/+0
Some TI platforms, specifically those in the am33xx, am43xx, dra7xx, and am57xx families of SoCs can make use of the ti-cpufreq driver to selectively enable OPPs based on the exact configuration in use. The ti-cpufreq is given the responsibility of creating the cpufreq-dt platform device when the driver is in use so drop am33xx and dra7xx from the cpufreq-dt-platdev driver so it is not created twice. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-05cpufreq: dt: Add support for APM X-Gene 2Hoan Tran1-0/+2
Add the compatible string for supporting the generic device tree cpufreq-dt driver on APM's X-Gene 2 SoC. Signed-off-by: Hoan Tran <hotran@apm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01cpufreq: dt: Add support for zx296718Baoyou Xie1-0/+2
Add the compatible string for supporting the generic cpufreq driver on the ZTE's zx296718 SoC. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17cpufreq: dt: Add support for r8a7743 and r8a7745Geert Uytterhoeven1-0/+2
Add the compatible strings for supporting the generic cpufreq driver on the Renesas RZ/G1M (r8a7743) and RZ/G1E (r8a7745) SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11cpufreq: pxa: use generic platdev driver for device-treeRobert Jarzmik1-0/+2
For device-tree based pxa25x and pxa27x platforms, cpufreq-dt driver is doing the job as well as pxa2xx-cpufreq, so add these platforms to the compatibility list. This won't work for legacy non device-tree platforms where pxa2xx-cpufreq is still required. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01cpufreq: dt: add Socionext UniPhier SoCs supportMasahiro Yamada1-0/+6
Add compatible strings for Pro5, PXs2, LD6b, LD11, LD20 SoCs to use the generic cpufreq driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01cpufreq: enable the DT cpufreq driver on the IntegratorsLinus Walleij1-0/+3
This enables the generic DT and OPP-based cpufreq driver on the ARM Integrator/AP and Integrator/CP. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-17cpufreq: ti: Use generic platdev driverDave Gerlach1-0/+2
Now that the cpufreq-dt-platdev is used to create the cpufreq-dt platform device for all OMAP platforms and the platform code that did it before has been removed, add ti,am33xx and ti,dra7xx to the machine list in cpufreq-dt-platdev which had relied on the removed platform code to do this previously. Fixes: 7694ca6e1d6f (cpufreq: omap: Use generic platdev driver) Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.7+ <stable@vger.kernel.org> # 4.7+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-13cpufreq: dt: Support governor tunables per policyViresh Kumar1-2/+5
The cpufreq-dt driver is also used for systems with multiple clock/voltage domains for CPUs, i.e. multiple cpufreq policies in a system. And in such cases the platform users may want to enable "governor tunables per policy". Support that via platform data, as not all users of the driver would want that behavior. Reported-by: Juri Lelli <Juri.Lelli@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-13cpufreq: dt: Add support for r8a7792Geert Uytterhoeven1-0/+1
Add the compatible string for supporting the generic cpufreq driver on the Renesas R-Car V2H (r8a7792) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-12Merge back earlier cpufreq material for v4.9.Rafael J. Wysocki1-0/+1
2016-08-31cpufreq: dt: Add terminate entry for of_device_id tablesWei Yongjun1-0/+2
Make sure of_device_id tables are NULL terminated. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Fixes: f56aad1d98f1 (cpufreq: dt: Add generic platform-device creation support) CC: 4.7+ <stable@vger.kernel.org> # 4.7+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-16cpufreq: dt: Add exynos5433 compatible to use generic cpufreq driverChanwoo Choi1-0/+1
This patch adds the exynos5433 compatible string for supporting the generic cpufreq driver on Exynos5433. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-21 19:05:33 +0300