| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This symbol is selected by a couple drivers, but isn't used by anyone
and hasn't been for years now. Drop it.
No functional change intended.
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Mike Tipton <quic_mdtipton@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240619-drop-qcom-rpmcc-v1-1-b487c95162ef@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Audiomix block control can be a reset controller for
Enhanced Audio Return Channel (EARC), which is one of
modules in this audiomix subsystem.
The reset controller is supported by the auxiliary device
framework.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/1718350923-21392-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Let the kememdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240606161028.2986587-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add the missing MODULE_DESCRIPTION() in the Amlogic clock modules missing
it.
Reported-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Closes: https://lore.kernel.org/linux-clk/964210f1-671f-4ecc-bdb7-3cf53089c327@quicinc.com
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240611133512.341817-1-jbrunet@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add a driver for the SOPHGO SG2042 clocks.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add a driver for the GPU clock controller block found on the QCM2290 SoC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-rb1_gpu-v4-3-4bc0c19da4af@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit 134b55b7e19f ("clk: qcom: support Huayra type Alpha PLL")
introduced an entry to the alpha offsets array, but diving into QCM2290
downstream and some documentation, it turned out that the name Huayra
apparently has been used quite liberally across many chips, even with
noticeably different hardware.
Introduce another set of offsets and a new configure function for the
Huayra PLL found on QCM2290. This is required e.g. for the consumers
of GPUCC_PLL0 to properly start.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-rb1_gpu-v4-2-4bc0c19da4af@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The clock controller driver of qca8386/qca8084 is registered
as the MDIO device, the hardware register is accessed by MDIO bus
that is normally used to access general PHY device, which is
different from the current existed qcom clock controller drivers
using ioremap to access hardware clock registers, nsscc-qca8k is
accessed via an MDIO bus.
MDIO bus is commonly utilized by both qca8386/qca8084 and other
PHY devices, so the mutex lock mdio_bus->mdio_lock should be
used instead of using the mutex lock of remap.
To access the hardware clock registers of qca8386/qca8084, there
is a special MDIO frame sequence, which needs to be sent to the
device.
Enable the reference clock before resetting the clock controller,
the reference clock rate is fixed to 50MHZ.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240605124541.2711467-5-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The previous wrapper qcom_cc_really_probe takes the platform
device as parameter, which is limited to platform driver.
As for qca8k clock controller driver, which is registered as
the MDIO device, which also follows the qcom clock framework.
To commonize qcom_cc_really_probe, updating it to take the
struct device as parameter, so that the qcom_cc_really_probe
can be utilized by the previous platform device and the new
added MDIO device.
Also update the current clock controller drivers to take
&pdev->dev as parameter when calling qcom_cc_really_probe.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240605124541.2711467-4-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the clk_branch2_prepare_ops for supporting clock controller
where the hardware register is accessed by MDIO bus, and the
spin lock can't be used because of sleep during the MDIO
operation.
The clock is enabled by the .prepare instead of .enable when
the clk_branch2_prepare_ops is used.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240605124541.2711467-2-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Pull ARM and clkdev fixes from Russell King:
- Fix clkdev - erroring out on long strings causes boot failures, so
don't do this. Still warn about the over-sized strings (which will
never match and thus their registration with clkdev is useless)
- Fix for ftrace with frame pointer unwinder with recent GCC changing
the way frames are stacked.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9405/1: ftrace: Don't assume stack frames are contiguous in memory
clkdev: don't fail clkdev_alloc() if over-sized
|
|
Add the VIN module clocks, which are used by the VIN modules on the
Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240606170858.1694652-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
|
|
When dealing with certain PLLs, it is necessary to avoid modifying them
if they have already been initialized by lower levels. For instance, in
the A1 SoC Family, the sys_pll is enabled as the parent for the cpuclk,
and it cannot be disabled during the initialization sequence. Therefore,
initialization phase must be skipped.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Link: https://lore.kernel.org/r/20240515185103.20256-2-ddrokosov@salutedevices.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
In order to get rid of CLK_NR_CLKS and be able to drop it from the
bindings, use rockchip_clk_find_max_clk_id helper to find the highest
clock id.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20240606143401.32454-3-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
A static spinlock can be initialized automatically with
DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init().
Suggested-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/8da2c908f00043f05f7e26e3c26400aea0cfe8bc.1716975021.git.geert+renesas@glider.be
|
|
A global spinlock can be initialized automatically with
DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init().
Suggested-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/9073a6bfb7791e492156331fa8a0ea87a7c7cef6.1716975021.git.geert+renesas@glider.be
|
|
R-Car Gen3 Socs use the common CPG/MSSR library functions in
rcar-cpg-lib.c, so the R-Car V3M sub-driver can use the common cpg_lock
instead of a driver-private lock.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/0cd9b5ffbe986bd7dc4ffb3f13492123432ee2e1.1716975021.git.geert+renesas@glider.be
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table. Clocks are considered core
components, so usually they are built-in, however these can be built and
used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240604130531.170371-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Don't fail clkdev_alloc() if the strings are over-sized. In this case,
the entry will not match during lookup, so its useless. However, since
code fails if we return NULL leading to boot failure, return a dummy
entry with the connection and device IDs set to "bad".
Leave the warning so these problems can be found, and the useless
wasteful clkdev registrations removed.
Reported-by: Ron Economos <re@w6rz.net>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 8d532528ff6a ("clkdev: report over-sized strings when creating clkdev entries")
Closes: https://lore.kernel.org/linux-clk/7eda7621-0dde-4153-89e4-172e4c095d01@roeck-us.net.
Link: https://lore.kernel.org/r/28114882-f8d7-21bf-4536-a186e8d7a22a@w6rz.net
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
'gates_data' (and it's associated define) are unused since
commit ee38b2698ae2 ("clk: sunxi: Add a simple gates driver").
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240509230516.86023-1-linux@treblig.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sunxi-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/suniv-f1c100s-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun20i-d1-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun20i-d1-r-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-a64-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-a100-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-a100-r-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-h6-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-h6-r-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-h616-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun4i-a10-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun6i-a31-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun6i-rtc-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-a23-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-a33-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-a83t-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-h3-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-r40-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-v3s-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-de2-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-r-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun9i-a80-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun9i-a80-de-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun9i-a80-usb-ccu.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240603-md-drivers-clk-sunxi-ng-v1-1-c44a4c22d544@quicinc.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add the C3 peripherals clock controller driver in the C3 SoC family.
[jbrunet: fix Kconfig select order and probe function name]
Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240522082727.3029656-6-xianwei.zhao@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add the C3 PLL clock controller driver for the Amlogic C3 SoC family.
[jbrunet: fixed probe function name]
Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240522082727.3029656-5-xianwei.zhao@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add a MODULE_DESCRIPTION() on all drivers that miss it to avoid
modpost warnings.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240528121320.160685-1-angelogioacchino.delregno@collabora.com
Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/clk_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/clk-gate_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/clk-fractional-divider_test.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240602-md-clk-test-v1-1-a6afd4793337@quicinc.com
[sboyd@kernel.org: Reword header and description]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sprd/clk-sprd.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240602-md-clk-sprd-v1-1-de0884ea6fc7@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sophgo/clk-sophgo-cv1800.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240601-md-drivers-clk-sophgo-clk-sophgo-cv1800-v1-1-8e00d8c3a87b@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add ck_icn_p_iwdg1, ck_icn_p_pka, ck_icn_p_rng, ck_icn_p_saes,
ck_icn_p_serc clocks.
They could be configured for non secured world.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20240529131310.260954-3-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use an STM32 access controller to filter the registration of clocks.
If a clock is used by the security world, then it must not registered.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20240529131310.260954-2-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Update peripherals pwm_j_div's parent clock to pwm_j_mux
Fixes: 57b55c76aaf1 ("clk: meson: S4: add support for Amlogic S4 SoC peripheral clock controller")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240516071612.2978201-1-xianwei.zhao@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
The fixed_pll_dco output frequency is not accurate,
add frac factor for fixed_pll_dco clk to fix it.
Fixes: 57b55c76aaf1 ("clk: meson: S4: add support for Amlogic S4 SoC peripheral clock controller")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240603-s4_fixedpll-v1-1-2b2a98630841@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add the CSI40 and CSI41 module clocks, which are used by the CSI-2
interfaces on the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240527131541.1676525-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add the ISPCS0 and ISPCS1 module clocks, which are used by the ISPCS
modules on the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240527131541.1676525-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Camera titan top GDSC is a parent supply to all other camera GDSCs. Titan
top GDSC is required to be enabled before enabling any other camera GDSCs
and it should be disabled only after all other camera GDSCs are disabled.
Ensure this behavior by marking titan top GDSC as parent of all other
camera GDSCs.
Fixes: 1daec8cfebc2 ("clk: qcom: camcc: Add camera clock controller driver for SC7280")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240531095142.9688-4-quic_tdas@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the force mem core bit for UFS ICE clock to force the core on signal
to remain active during halt state of the clk. When retention bit of the
clock is set the memories of the subsystem will retain the logic across
power states.
Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240531095142.9688-3-quic_tdas@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support to update the GDSC transition delay values to avoid
the GDSC FSM state stuck issues without which it could lead to GDSC
power on/off failures.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240531095142.9688-2-quic_tdas@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
These clkdevs were unnecessary, because systems using this driver always
look up clocks using the devicetree. And as Russell King points out[1],
since the provided device name was truncated, lookups via clkdev would
never match.
Recently, commit 8d532528ff6a ("clkdev: report over-sized strings when
creating clkdev entries") caused clkdev registration to fail due to the
truncation, and this now prevents the driver from probing. Fix the
driver by removing the clkdev registration.
Link: https://lore.kernel.org/linux-clk/ZkfYqj+OcAxd9O2t@shell.armlinux.org.uk/ [1]
Fixes: 30b8e27e3b58 ("clk: sifive: add a driver for the SiFive FU540 PRCI IP block")
Fixes: 8d532528ff6a ("clkdev: report over-sized strings when creating clkdev entries")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/linux-clk/7eda7621-0dde-4153-89e4-172e4c095d01@roeck-us.net/
Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240528001432.1200403-1-samuel.holland@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The crypto_ahb and crypto_axi clks are hardware voteable.
This means that the halt bit isn't reliable because some
other voter in the system, e.g. TrustZone, could be keeping
the clk enabled when the kernel turns it off from clk_disable().
Make these clks use voting mode by changing the halt check to
BRANCH_HALT_VOTED and toggle the voting bit in the voting register
instead of directly controlling the branch by writing to the branch
register. This fixes stuck clk warnings seen on ipq9574 and saves
power by actually turning the clk off.
Also changes the CRYPTO_AHB_CLK_ENA & CRYPTO_AXI_CLK_ENA
offset to 0xb004 from 0x16014.
Cc: stable@vger.kernel.org
Fixes: f6b2bd9cb29a ("clk: qcom: gcc-ipq9574: Enable crypto clocks")
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://lore.kernel.org/r/20240509105405.1262369-1-quic_mdalam@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since the CONFIG_CTL register is only 32 bits wide in the Stromer
and Stromer Plus PLLs , the 'config_ctl_hi_val' values from the
IPQ5018 and IPQ5332 configurations are not used so remove those.
No functional changes.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240509-stromer-config-ctl-v1-1-6034e17b28d5@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The clk_alpha_pll_stromer_plus_set_rate() function does not
sets the ALPHA_EN bit in the USER_CTL register, so setting
rates which requires using alpha mode works only if the bit
gets set already prior calling the function.
Extend the function to set the ALPHA_EN bit in order to allow
using fractional rates regardless whether the bit gets set
previously or not.
Fixes: 84da48921a97 ("clk: qcom: clk-alpha-pll: introduce stromer plus ops")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240508-stromer-plus-alpha-en-v1-1-6639ce01ca5b@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Both gpll6 and gpll7 are parented to CXO at 19.2 MHz and not to GPLL0
which runs at 600 MHz. Also gpll6_out_even should have the parent gpll6
and not gpll0.
Adjust the parents of these clocks to make Linux report the correct rate
and not absurd numbers like gpll7 at ~25 GHz or gpll6 at 24 GHz.
Corrected rates are the following:
gpll7 807999902 Hz
gpll6 768000000 Hz
gpll6_out_even 384000000 Hz
gpll0 600000000 Hz
gpll0_out_odd 200000000 Hz
gpll0_out_even 300000000 Hz
And because gpll6 is the parent of gcc_sdcc2_apps_clk_src (at 202 MHz)
that clock also reports the correct rate now and avoids this warning:
[ 5.984062] mmc0: Card appears overclocked; req 202000000 Hz, actual 6312499237 Hz
Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240508-sm6350-gpll-fix-v1-1-e4ea34284a6d@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The IPQ9574 has four PCIe "pipe" clocks. These clocks are required by
PCIe PHYs. Port the pipe clocks from the downstream 5.4 kernel.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240501040800.1542805-3-mr.nuke.me@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The DSI controller needs this clock to be enabled in order to be able to
access the registers. Make it critical for that purpose.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20240509140653.168591-5-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Export the D-DHY's APB clock for usage in the DT. Also drop the
CLK_IGNORE_UNUSED-flag, as the clock will be enabled on demand.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20240509140653.168591-4-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add support for the video clock controller found on SM7150.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240505201038.276047-9-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for the camera clock controller found on SM7150.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240505201038.276047-7-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for the display clock controller found on SM7150.
Co-developed-by: David Wronek <david@mainlining.org>
Signed-off-by: David Wronek <david@mainlining.org>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240505201038.276047-5-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The clk_init_data structures are never modified, make them const.
No functional changes.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240505201038.276047-3-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add dependencies on "ARM64 or COMPILE_TEST" for SM_GCC_7150.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240505201038.276047-2-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
