summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2025-01-07clk: qcom: gcc-x1e80100: Do not turn off usb_2 controller GDSCAbel Vesa1-1/+1
Allowing the usb_2 controller GDSC to be turned off during system suspend renders the controller unable to resume. So use PWRSTS_RET_ON instead in order to make sure this the GDSC doesn't go down. Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100") Cc: stable@vger.kernel.org # 6.8 Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250107-x1e80100-clk-gcc-fix-usb2-gdsc-pwrsts-v1-1-e15d1a5e7d80@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07clk: renesas: r9a09g057: Add clock and reset entries for GICLad Prabhakar1-0/+4
Add clock and reset entries for GIC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250102181839.352599-7-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-01-07clk: renesas: r9a09g057: Add reset entry for SYSLad Prabhakar1-0/+1
Add the missing reset entry for the `SYS` module in the clock driver. The corresponding core clock entry for `SYS` is already present. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250102181839.352599-6-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-01-07clk: renesas: r8a779g0: Add VSPX clocksJacopo Mondi1-0/+2
Add the VSPX modules clock for Renesas R-Car V4H (R8A779G0) SoC. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com> Link: https://lore.kernel.org/20241220-rcar-v4h-vspx-v4-3-7dc1812585ad@ideasonboard.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-01-07clk: renesas: r8a779g0: Add FCPVX clocksJacopo Mondi1-0/+2
Add the FCPVX modules clock for Renesas R-Car V4H (R8A779G0) SoC. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com> Link: https://lore.kernel.org/20241220-rcar-v4h-vspx-v4-1-7dc1812585ad@ideasonboard.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-01-07clk: renesas: r9a09g047: Add I2C clocks/resetsBiju Das1-0/+32
Add I2C{0..8} clock and reset entries. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20241216120029.143944-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-01-07clk: renesas: r9a09g047: Add CA55 core clocksBiju Das1-0/+16
Add CA55 core clocks which are derived from PLLCA55. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/20241213123550.289193-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-01-07clk: renesas: rzv2h: Add support for RZ/G3E SoCBiju Das5-1/+116
The clock structure for RZ/G3E is almost identical to RZ/V2H SoC with more IP blocks compared to RZ/V2H. For eg: VSPI, LVDS, DPI and LCDC1 are present only on the RZ/G3E SoC. Add minimal clock and reset entries required to boot the Renesas RZ/G3E SMARC EVK and binds it with the RZ/V2H CPG core driver. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/20241213123550.289193-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-01-07clk: renesas: rzv2h: Add MSTOP supportBiju Das3-79/+252
Add MSTOP support to control buses for the individual units on RZ/V2H. Use per-bit (instead of group-based) configuration and atomic counters, to ensure precise control over individual MSTOP bits, and to prevent issues with shared dependencies between module clocks. Co-developed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Co-developed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20241213123550.289193-2-biju.das.jz@bp.renesas.com Link: https://lore.kernel.org/20250102181839.352599-2-prabhakar.mahadev-lad.rj@bp.renesas.com Link: https://lore.kernel.org/20250102181839.352599-3-prabhakar.mahadev-lad.rj@bp.renesas.com Link: https://lore.kernel.org/20250102181839.352599-4-prabhakar.mahadev-lad.rj@bp.renesas.com Link: https://lore.kernel.org/20250102181839.352599-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-01-07clk: qcom: ipq5424: add gcc_xo_clkManikanta Mylavarapu1-0/+19
The gcc_xo_clk is required for the functionality of the WiFi copy engine block. Therefore, add the gcc_xo_clk in gcc driver. Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> Link: https://lore.kernel.org/r/20241210064110.130466-3-quic_mmanikan@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07clk: qcom: ipq5424: remove apss_dbg clockManikanta Mylavarapu1-19/+0
The gcc_apss_dbg clk is access protected by trust zone, and accessing it results in a kernel crash. Therefore remove the gcc_apss_dbg_clk from the gcc driver. Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> Link: https://lore.kernel.org/r/20241217113909.3522305-2-quic_mmanikan@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07clk: qcom: mmcc-msm8960: handle LVDS clockDmitry Baryshkov1-4/+57
On APQ8064 the DSI2_PIXEL_SRC clock can be used either to drive the second DSI host or to drive the LCDC controller. Add LVDS PLL as possible source to the clock and LVDS output clock. The DSI2_PIXEL_SRC clock has separate path to be used for the LVDS clock. To represent both DSI and LVDS clocks properly, add intermediate clock which toggles the enable bit and make DSI2_PIXEL_CLK clock just check for the HALT bit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241224-apq8064-fix-mmcc-v1-4-c95d2e2bf143@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07clk: qcom: rcg: add 1/1 pixel clock ratioDmitry Baryshkov1-0/+1
LVDS clocks require 1:1 ration support in the table used by clk_rcg_pixel_ops. Add corresponding divider to the table. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241224-apq8064-fix-mmcc-v1-3-c95d2e2bf143@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07clk: ti: use kcalloc() instead of kzalloc()Ethan Carter Edwards1-1/+1
Use 2-factor multiplication argument form kcalloc() instead of kzalloc(). Link: https://github.com/KSPP/linux/issues/162 Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Link: https://lore.kernel.org/r/xfjn4wqrhukvi45dkgkbulamq3242eijn7567vxwaxznh4ebdr@waat7u3l2mhi Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-07clk: qcom: Add CMN PLL clock controller driver for IPQ SoCLuo Jie3-0/+445
The CMN PLL clock controller supplies clocks to the hardware blocks that together make up the Ethernet function on Qualcomm IPQ SoCs and to GCC. The driver is initially supported for IPQ9574 SoC. The CMN PLL clock controller expects a reference input clock from the on-board Wi-Fi block acting as clock source. The input reference clock needs to be configured to one of the supported clock rates. The controller supplies a number of fixed-rate output clocks. For the IPQ9574, there is one output clock of 353 MHZ to PPE (Packet Process Engine) hardware block, three 50 MHZ output clocks and an additional 25 MHZ output clock supplied to the connected Ethernet devices. The PLL also supplies a 24 MHZ clock as XO and a 32 KHZ sleep clock to GCC, and one 31.25 MHZ clock to PCS. Signed-off-by: Luo Jie <quic_luoj@quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250103-qcom_ipq_cmnpll-v8-2-c89fb4d4849d@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-06clk: qcom: dispcc-sm8750: Add SM8750 Display clock controllerKrzysztof Kozlowski3-0/+1975
Add driver for Display clock controller (DISPCC) in Qualcomm SM8750. The device has several differences against SM8650, including new Pongo PLLs and different clock parents, thus no compatibility or driver re-usage. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250106-sm8750-dispcc-v2-3-6f42beda6317@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-06clk: qcom: clk-alpha-pll: Add Pongo PLLKrzysztof Kozlowski2-1/+170
Add support for Pongo type of PLL clocks, used in Qualcomm SM8750 SoC. Notable difference comparing to other PLLs is the need for calibration for internally generated clock followed by wait_for_pll(). This is done in configure call and at this time clocks are not yet registered, thus wait_for_pll() cannot use clk_hw_get_name. Locking during this calibration requires much more time, thus increase the timeout in wait_for_pll(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250106-sm8750-dispcc-v2-2-6f42beda6317@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-06clk: qcom: Add TCSR clock driver for SM8750Taniya Das3-0/+150
The TCSR clock controller found on SM8750 provides refclks for PCIE, USB and UFS. Add clock driver for it. Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-8-1a8f31a53a86@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-06clk: qcom: Add support for GCC on SM8750Taniya Das3-0/+3284
Add support for GCC for SM8750 platform. Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-6-1a8f31a53a86@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-06clk: qcom: clk-alpha-pll: Add support for controlling Taycan PLLsTaniya Das2-0/+21
Add clock ops for Taycan PLL, add the register offsets for supporting the PLL. Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-4-1a8f31a53a86@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-06clk: qcom: rpmh: Add support for SM8750 rpmh clocksTaniya Das1-0/+24
Add the RPMH clocks present in SM8750 SoC. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-3-1a8f31a53a86@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-06clk: qcom: rpmh: Sort the match table alphabeticallyTaniya Das1-1/+1
Update the match table for SC7280 to sort it in alphabetical order. Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-2-1a8f31a53a86@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-05Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds2-2/+14
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A randconfig build fix and a performance fix: - Fix the CONFIG_RESET_CONTROLLER=n path signature of clk_imx8mp_audiomix_reset_controller_register() to appease randconfig - Speed up the sdhci clk on TH1520 by a factor of 4 by adding a fixed factor clk" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: clk-imx8mp-audiomix: fix function signature clk: thead: Fix TH1520 emmc and shdci clock rate
2025-01-04clk: sunxi-ng: a64: stop force-selecting PLL-MIPI as TCON0 parentVasily Khoruzhick1-9/+4
Stop force-selecting PLL-MIPI as TCON0 parent, since it breaks video output on Pinebook that uses RGB to eDP bridge. Partially revert commit ca1170b69968 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux"), while still leaving CLK_SET_RATE_NO_REPARENT flag set, since we do not want the clock to be reparented. The issue is that apparently different TCON0 outputs require a different clock, or the mux might be selecting the output type. I did an experiment: I manually configured PLL_MIPI and PLL_VIDEO0_2X to the same clock rate and flipped the switch with devmem. Experiment clearly showed that whenever PLL_MIPI is selected as TCON0 clock parent, the video output stops working. Therefore, TCON0 clock parent corresponding to the output type must be assigned in the device tree. Fixes: ca1170b69968 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux") Reviewed-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on PinePhone Tested-by: Stuart Gathman <stuart@gathman.org> # on OG Pinebook Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Link: https://patch.msgid.link/20250104074035.1611136-5-anarsoul@gmail.com Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2025-01-04clk: sunxi-ng: a64: drop redundant CLK_PLL_VIDEO0_2X and CLK_PLL_MIPIVasily Khoruzhick1-2/+0
Drop redundant CLK_PLL_VIDEO0_2X and CLK_PLL.MIPI. These are now defined in dt-bindings/clock/sun50i-a64-ccu.h Fixes: ca1170b69968 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux") Reviewed-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on pinephone Tested-by: Stuart Gathman <stuart@gathman.org> # on OG pinebook Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Link: https://patch.msgid.link/20250104074035.1611136-3-anarsoul@gmail.com Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2025-01-03clk: qcom: gcc-mdm9607: Fix cmd_rcgr offset for blsp1_uart6 rcgSatya Priya Kakitapalli1-1/+1
Fix cmd_rcgr offset for blsp1_uart6_apps_clk_src on mdm9607 platform. Fixes: 48b7253264ea ("clk: qcom: Add MDM9607 GCC driver") Cc: stable@vger.kernel.org Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20241220095048.248425-1-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-29clk: at91: sama7d65: add sama7d65 pmc driverRyan Wanner5-2/+1379
Add clock support for SAMA7D65 SoC. Increase maximum number of valid master clocks. The PMC for the SAMA7D65 requires 9 master clocks. Increase maximum amount of PLLs to 9 to support SAMA7D65 SoC PLL requirements. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/549fa8590fe9b4380e413f8eed87392f28754395.1734723585.git.Ryan.Wanner@microchip.com [claudiu.beznea: sorted alphanumerically the Makefile entries, reorder the code for resource cleanup in sama7d65_pmc_setup()] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-12-27clk: qcom: camcc-x1e80100: Set titan_top_gdsc as the parent GDSC of ↵Bryan O'Donoghue1-0/+7
subordinate GDSCs The Titan TOP GDSC is the parent GDSC for all other GDSCs in the CAMCC block. None of the subordinate blocks will switch on without the parent GDSC switched on. Fixes: 76126a5129b5 ("clk: qcom: Add camcc clock driver for x1e80100") Acked-by: Rajendra Nayak <quic_rjendra@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Link: https://lore.kernel.org/r/20241227-b4-linux-next-24-12-16-titan-top-gdsc-v1-1-c96ef62fc307@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-27clk: sunxi-ng: a100: enable MMC clock reparentingCody Eksal1-3/+3
While testing the MMC nodes proposed in [1], it was noted that mmc0/1 would fail to initialize, with "mmc: fatal err update clk timeout" in the kernel logs. A closer look at the clock definitions showed that the MMC MPs had the "CLK_SET_RATE_NO_REPARENT" flag set. No reason was given for adding this flag in the first place, and its original purpose is unknown, but it doesn't seem to make sense and results in severe limitations to MMC speeds. Thus, remove this flag from the 3 MMC MPs. [1] https://msgid.link/20241024170540.2721307-10-masterr3c0rd@epochal.quest Fixes: fb038ce4db55 ("clk: sunxi-ng: add support for the Allwinner A100 CCU") Cc: stable@vger.kernel.org Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Link: https://patch.msgid.link/20241109003739.3440904-1-masterr3c0rd@epochal.quest Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-12-27clk: qcom: Make GCC_8150 depend on QCOM_GDSCKonrad Dybcio1-0/+1
Like all other non-ancient Qualcomm clock drivers, QCOM_GDSC is required, as the GCC driver defines and instantiates a bunch of GDSCs. Add the missing dependency. Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Closes: https://lore.kernel.org/linux-arm-msm/ab85f2ae-6c97-4fbb-a15b-31cc9e1f77fc@linaro.org/ Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Link: https://lore.kernel.org/r/20241026-topic-8150gcc_kconfig-v1-1-3772013d8804@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-27clk: qcom: clk-alpha-pll: fix alpha mode configurationGabor Juhos1-0/+2
Commit c45ae598fc16 ("clk: qcom: support for alpha mode configuration") added support for configuring alpha mode, but it seems that the feature was never working in practice. The value of the alpha_{en,mode}_mask members of the configuration gets added to the value parameter passed to the regmap_update_bits() function, however the same values are not getting applied to the bitmask. As the result, the respective bits in the USER_CTL register are never modifed which leads to improper configuration of several PLLs. The following table shows the PLL configurations where the 'alpha_en_mask' member is set and which are passed as a parameter for the clk_alpha_pll_configure() function. In the table the 'expected rate' column shows the rate the PLL should run at with the given configuration, and the 'real rate' column shows the rate the PLL runs at actually. The real rates has been verified on hardwareOn IPQ* platforms, on other platforms, those are computed values only. file pll expected rate real rate dispcc-qcm2290.c disp_cc_pll0 768.0 MHz 768.0 MHz dispcc-sm6115.c disp_cc_pll0 768.0 MHz 768.0 MHz gcc-ipq5018.c ubi32_pll 1000.0 MHz != 984.0 MHz gcc-ipq6018.c nss_crypto_pll 1200.0 MHz 1200.0 MHz gcc-ipq6018.c ubi32_pll 1497.6 MHz != 1488.0 MHz gcc-ipq8074.c nss_crypto_pll 1200.0 MHz != 1190.4 MHz gcc-qcm2290.c gpll11 532.0 MHz != 518.4 MHz gcc-qcm2290.c gpll8 533.2 MHz != 518.4 MHz gcc-qcs404.c gpll3 921.6 MHz 921.6 MHz gcc-sm6115.c gpll11 600.0 MHz != 595.2 MHz gcc-sm6115.c gpll8 800.0 MHz != 787.2 MHz gpucc-sdm660.c gpu_cc_pll0 800.0 MHz != 787.2 MHz gpucc-sdm660.c gpu_cc_pll1 740.0 MHz != 729.6 MHz gpucc-sm6115.c gpu_cc_pll0 1200.0 MHz != 1190.4 MHz gpucc-sm6115.c gpu_cc_pll1 640.0 MHz != 633.6 MHz gpucc-sm6125.c gpu_pll0 1020.0 MHz != 1017.6 MHz gpucc-sm6125.c gpu_pll1 930.0 MHz != 921.6 MHz mmcc-sdm660.c mmpll8 930.0 MHz != 921.6 MHz mmcc-sdm660.c mmpll5 825.0 MHz != 806.4 MHz As it can be seen from the above, there are several PLLs which are configured incorrectly. Change the code to apply both 'alpha_en_mask' and 'alpha_mode_mask' values to the bitmask in order to configure the alpha mode correctly. Applying the 'alpha_en_mask' fixes the initial rate of the PLLs showed in the table above. Since the 'alpha_mode_mask' is not used by any driver currently, that part of the change causes no functional changes. Cc: stable@vger.kernel.org Fixes: c45ae598fc16 ("clk: qcom: support for alpha mode configuration") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20241021-fix-alpha-mode-config-v1-1-f32c254e02bc@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-27clk: qcom: dispcc-sm6115: remove alpha values from disp_cc_pll0_configGabor Juhos1-2/+0
Since both the 'alpha' and 'alpha_hi' members of the configuration is initialized (the latter is implicitly) with zero values, the output rate of the PLL will be the same whether alpha mode is enabled or not. Remove the initialization of the alpha* members to make it clear that the alpha mode is not required to get the desired output rate. Despite that enabling alpha mode is not needed for the initial configuration, the set_rate() op might require that it is enabled already. In this particular case however, the clk_alpha_pll_set_rate() function will get reset the ALPHA_EN bit when the PLL's rate changes, so dropping 'alpha_en_mask' is safe. No functional changes intended, compile tested only. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-5-9bc6d712bd76@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-27clk: qcom: dispcc-qcm2290: remove alpha values from disp_cc_pll0_configGabor Juhos1-2/+0
Since both the 'alpha' and 'alpha_hi' members of the configuration is initialized (the latter is implicitly) with zero values, the output rate of the PLL will be the same whether alpha mode is enabled or not. Remove the initialization of the alpha* members to make it clear that the alpha mode is not required to get the desired output rate. Despite that enabling alpha mode is not needed for the initial configuration, the set_rate() op might require that it is enabled already. In this particular case however, the clk_alpha_pll_set_rate() function will get reset the ALPHA_EN bit when the PLL's rate changes, so dropping 'alpha_en_mask' is safe. No functional changes intended, compile tested only. Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-4-9bc6d712bd76@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-27clk: qcom: gcc-ipq6018: remove alpha values from NSS Crypto PLL's configGabor Juhos1-3/+1
Since both the 'alpha' and 'alpha_hi' members of the configuration is initialized with zero values, the output rate of the PLL will be the same whether alpha mode is enabled or not. Remove the initialization of the alpha* members to make it clear that alpha mode is not required to get the desired output rate. Despite that enabling alpha mode is not needed for the initial configuration, the set_rate() op might require that it is enabled already. In this particular case however, the clk_alpha_pll_set_rate() function will get reset the ALPHA_EN bit when the PLL's rate changes, so dropping 'alpha_en_mask' is safe. While at it, also add a comment to indicate the frequency the PLL runs at with the current configuration. No functional changes, the PLL runs at 1.2 GHz both before and after the change. Tested on Xiaomi Mi Router AX1800 (IPQ6018, out-of-tree board). Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-3-9bc6d712bd76@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-27clk: qcom: apps-ipq-pll: drop 'alpha_en_mask' from IPQ5332 PLL configGabor Juhos1-1/+1
Since neither 'alpha' nor 'alpha_hi' is defined in the configuration, those will be initialized with zero values implicitly. By using zero alpha values, the output rate of the PLL will be the same whether alpha mode is enabled or not. Remove the superfluous initialization of the 'alpha_en_mask' member to make it clear that enabling alpha mode is not required to get the desired output rate. Despite that enabling alpha mode is not needed for the initial configuration, the set_rate() op might require that it is enabled already. In this particular case however, the clk_alpha_pll_stromer_plus_set_rate() function will get reset the ALPHA_EN bit when the PLL's rate changes, so dropping 'alpha_en_mask' is safe. While at it, also add a comment to indicate the frequency the PLL runs at with the current configuration. No functional changes, the initial rate of the PLL is the same both before and after the patch. Tested on Xiaomi Router BE3600 2.5G (IPQ5312, out-of-tree board). Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-2-9bc6d712bd76@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-27clk: qcom: apss-ipq-pll: drop 'alpha_en_mask' from IPQ5018 PLL configGabor Juhos1-1/+0
Since neither 'alpha' nor 'alpha_hi' is defined in the configuration, those will be initialized with zero values implicitly. By using zero alpha values, the output rate of the PLL will be the same whether alpha mode is enabled or not. Remove the superfluous initialization of the 'alpha_en_mask' member to make it clear that enabling alpha mode is not required to get the desired output rate. Despite that enabling alpha mode is not needed for the initial configuration, the set_rate() op might require that it is enabled already. In this particular case however, the clk_alpha_pll_stromer_set_rate() function will get reset the ALPHA_EN bit when the PLL's rate changes, so dropping 'alpha_en_mask' is safe. No functional changes, the initial rate of the PLL is the same both before and after the patch. Tested on TP-Link Archer AX55 v1 (IPQ5018). Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241028-alpha-mode-cleanup-v2-1-9bc6d712bd76@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-27clk: qcom: dispcc-sm6350: Add missing parent_map for a clockLuca Weiss1-4/+3
If a clk_rcg2 has a parent, it should also have parent_map defined, otherwise we'll get a NULL pointer dereference when calling clk_set_rate like the following: [ 3.388105] Call trace: [ 3.390664] qcom_find_src_index+0x3c/0x70 (P) [ 3.395301] qcom_find_src_index+0x1c/0x70 (L) [ 3.399934] _freq_tbl_determine_rate+0x48/0x100 [ 3.404753] clk_rcg2_determine_rate+0x1c/0x28 [ 3.409387] clk_core_determine_round_nolock+0x58/0xe4 [ 3.421414] clk_core_round_rate_nolock+0x48/0xfc [ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc [ 3.444483] clk_core_set_rate_nolock+0x8c/0x300 [ 3.455886] clk_set_rate+0x38/0x14c Add the parent_map property for the clock where it's missing and also un-inline the parent_data as well to keep the matching parent_map and parent_data together. Fixes: 837519775f1d ("clk: qcom: Add display clock controller driver for SM6350") Cc: stable@vger.kernel.org Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20241220-sm6350-parent_map-v1-2-64f3d04cb2eb@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-27clk: qcom: gcc-sm6350: Add missing parent_map for two clocksLuca Weiss1-8/+14
If a clk_rcg2 has a parent, it should also have parent_map defined, otherwise we'll get a NULL pointer dereference when calling clk_set_rate like the following: [ 3.388105] Call trace: [ 3.390664] qcom_find_src_index+0x3c/0x70 (P) [ 3.395301] qcom_find_src_index+0x1c/0x70 (L) [ 3.399934] _freq_tbl_determine_rate+0x48/0x100 [ 3.404753] clk_rcg2_determine_rate+0x1c/0x28 [ 3.409387] clk_core_determine_round_nolock+0x58/0xe4 [ 3.421414] clk_core_round_rate_nolock+0x48/0xfc [ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc [ 3.444483] clk_core_set_rate_nolock+0x8c/0x300 [ 3.455886] clk_set_rate+0x38/0x14c Add the parent_map property for two clocks where it's missing and also un-inline the parent_data as well to keep the matching parent_map and parent_data together. Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver") Cc: stable@vger.kernel.org Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20241220-sm6350-parent_map-v1-1-64f3d04cb2eb@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-27clk: qcom: clk-rpmh: prevent integer overflow in recalc_rateAnastasia Belova1-1/+1
aggr_state and unit fields are u32. The result of their multiplication may not fit in this type. Add explicit casting to prevent overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 04053f4d23a4 ("clk: qcom: clk-rpmh: Add IPA clock support") Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Anastasia Belova <abelova@astralinux.ru> Link: https://lore.kernel.org/r/20241203084231.6001-1-abelova@astralinux.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-26clk: imx: Apply some clks only for i.MX93Peng Fan1-13/+13
Enable the LVDS gate, MIPI DSI, PXP, FLEXIO and MU only for i.MX93, because i.MX91 does not support them. Update enet clk entry format to align with others. Fixes: a27bfff88dd2 ("clk: imx: add i.MX91 clk") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20241225001443.883131-1-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2024-12-26clk: imx93: Add IMX93_CLK_SPDIF_IPG clockShengjiu Wang1-2/+4
Split IMX93_CLK_SPDIF_IPG from IMX93_CLK_SPDIF_GATE because the IMX93_CLK_SPDIF_GATE controls the gate of IPG clock and root clock. Without this change, disabling IMX93_CLK_SPDIF_GATE would also disable the IPG clock, causing register access failures. Fixes: 1c4a4f7362fd ("arm64: dts: imx93: Add audio device nodes") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20241119015805.3840606-3-shengjiu.wang@nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2024-12-26clk: imx: pll14xx: Add 208 MHz and 416 MHz entries for PLL1416xMarek Vasut1-0/+2
The PLL1416x is used to implement SYS_PLL3 on i.MX8MP and can be used to drive CLKOUTn clock. Add 208 MHz and 416 MHz entries to the PLL so they can be generated by the PLL and used to produce e.g. 13 MHz or 26 MHz on CLKOUTn output. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20241112013805.333798-1-marex@denx.de Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2024-12-26clk: imx8mp: Fix clkout1/2 supportMarek Vasut1-2/+3
The CLKOUTn may be fed from PLL1/2/3, but the PLL1/2/3 has to be enabled first by setting PLL_CLKE bit 11 in CCM_ANALOG_SYS_PLLn_GEN_CTRL register. The CCM_ANALOG_SYS_PLLn_GEN_CTRL bit 11 is modeled by plln_out clock. Fix the clock tree and place the clkout1/2 under plln_sel instead of plain plln to let the clock subsystem correctly control the bit 11 and enable the PLL in case the CLKOUTn is supplied by PLL1/2/3. Fixes: 43896f56b59e ("clk: imx8mp: add clkout1/2 support") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20241112013718.333771-1-marex@denx.de Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2024-12-26clk: qcom: gcc: Add support for QCS615 GCC clocksTaniya Das3-0/+3044
Add the global clock controller support for QCS615 SoC. Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241022-qcs615-clock-driver-v4-4-3d716ad0d987@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-26clk: qcom: rpmhcc: Add support for QCS615 ClocksTaniya Das1-0/+19
Add the RPMHCC clocks required for QCS615 SoC. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Link: https://lore.kernel.org/r/20241022-qcs615-clock-driver-v4-2-3d716ad0d987@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-26clk: qcom: spmi-pmic-div: simplify locking with guard()Krzysztof Kozlowski1-8/+5
Simplify error handling (less gotos) over locks with guard(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-clk-qcom-v1-3-68bb9601c9dd@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-26clk: qcom: smd-rpm: simplify locking with guard()Krzysztof Kozlowski1-15/+10
Simplify error handling (less gotos) over locks with guard(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-clk-qcom-v1-2-68bb9601c9dd@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-26clk: qcom: rpm: simplify locking with guard()Krzysztof Kozlowski1-16/+11
Simplify error handling (less gotos) over locks with guard(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-clk-qcom-v1-1-68bb9601c9dd@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-26clk: qcom: gcc-sm8650: Do not turn off PCIe GDSCs during gdsc_disable()Manivannan Sadhasivam1-4/+4
With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This can happen during scenarios such as system suspend and breaks the resume of PCIe controllers from suspend. So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs during gdsc_disable() and allow the hardware to transition the GDSCs to retention when the parent domain enters low power state during system suspend. Cc: stable@vger.kernel.org # 6.8 Fixes: c58225b7e3d7 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1") Reported-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8650 Link: https://lore.kernel.org/r/20241219170011.70140-2-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-12-26clk: qcom: gcc-sm8550: Do not turn off PCIe GDSCs during gdsc_disable()Manivannan Sadhasivam1-4/+4
With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This can happen during scenarios such as system suspend and breaks the resume of PCIe controllers from suspend. So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs during gdsc_disable() and allow the hardware to transition the GDSCs to retention when the parent domain enters low power state during system suspend. Cc: stable@vger.kernel.org # 6.2 Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550") Reported-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8550 Link: https://lore.kernel.org/r/20241219170011.70140-1-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-19 07:06:15 +0300