summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2022-11-25clk: imx: rename imx_obtain_fixed_clk_hw() to imx_get_clk_hw_by_name()Dario Binacchi13-55/+53
The imx_obtain_fixed_clk_hw name was wrong and misleading. Renaming it to imx_get_clk_hw_by_name clarifies the purpose of the function, and will allow it to be used not only for fixed rate clocks but also in wider contexts. No functional changes intended. The replacements were made with the following command: grep -rl 'imx_obtain_fixed_clk_hw' ./ | \ xargs sed -i 's/imx_obtain_fixed_clk_hw/imx_get_clk_hw_by_name/g' Tested on a BSH SystemMaster (SMM) S2 board. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221113180839.1625832-1-dario.binacchi@amarulasolutions.com
2022-11-25clk: imx8mn: fix imx8mn_enet_phy_sels clocks listDario Binacchi1-2/+2
According to the "Clock Root" table of the reference manual (document IMX8MNRM Rev 2, 07/2022): Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX]) ... ... ... ENET_PHY_REF_CLK_ROOT 0xAA80 000 - 24M_REF_CLK 001 - SYSTEM_PLL2_DIV20 010 - SYSTEM_PLL2_DIV8 011 - SYSTEM_PLL2_DIV5 100 - SYSTEM_PLL2_DIV2 101 - AUDIO_PLL1_CLK 110 - VIDEO_PLL_CLK 111 - AUDIO_PLL2_CLK ... ... ... while the imx8mn_enet_phy_sels list didn't contained audio_pll1_out for source select bits 101b. Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Acked-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221117113637.1978703-6-dario.binacchi@amarulasolutions.com
2022-11-25clk: imx8mn: fix imx8mn_sai2_sels clocks listDario Binacchi1-1/+1
According to the "Clock Root" table of the reference manual (document IMX8MNRM Rev 2, 07/2022): Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX]) ... ... ... SAI2_CLK_ROOT 0xA600 000 - 24M_REF_CLK 001 - AUDIO_PLL1_CLK 010 - AUDIO_PLL2_CLK 011 - VIDEO_PLL_CLK 100 - SYSTEM_PLL1_DIV6 110 - EXT_CLK_2 111 - EXT_CLK_3 ... ... ... while the imx8mn_sai2_sels list contained clk_ext3 and clk_ext4 for source select bits 110b and 111b. Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Acked-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221117113637.1978703-5-dario.binacchi@amarulasolutions.com
2022-11-25clk: imx: rename video_pll1 to video_pllDario Binacchi1-48/+48
Unlike audio_pll1 and audio_pll2, there is no video_pll2. Further, the name used in the RM is video_pll. So, let's rename "video_pll1" to "video_pll" to be consistent with the RM and avoid misunderstandings. The IMX8MN_VIDEO_PLL1* constants have not been removed to ensure backward compatibility of the patch. No functional changes intended. Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Acked-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221117113637.1978703-4-dario.binacchi@amarulasolutions.com
2022-11-25clk: imx: replace osc_hdmi with dummyDario Binacchi1-6/+6
There is no occurrence of the hdmi oscillator in the reference manual (document IMX8MNRM Rev 2, 07/2022). Further, if we consider the indexes 76-81 and 134 of the "Clock Root" table of chapter 5 of the RM, there is no entry for the source select bits 101b, which is the setting referenced by "osc_hdmi". Fix by renaming "osc_hdmi" with "dummy", a clock which has already been used for missing source select bits. Tested on the BSH SystemMaster (SMM) S2 board. Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Acked-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221117113637.1978703-3-dario.binacchi@amarulasolutions.com
2022-11-25clk: imx8mn: rename vpu_pll to m7_alt_pllDario Binacchi1-8/+8
The IMX8MN platform does not have any video processing unit (VPU), and indeed in the reference manual (document IMX8MNRM Rev 2, 07/2022) there is no occurrence of its pll. From an analysis of the code and the RM itself, I think vpu pll is used instead of m7 alternate pll, probably for copy and paste of code taken from modules of similar architectures. As an example for all, if we consider the second row of the "Clock Root" table of chapter 5 (Clocks and Power Management) of the RM: Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX]) ... ... ... ARM_M7_CLK_ROOT 0x8080 000 - 24M_REF_CLK 001 - SYSTEM_PLL2_DIV5 010 - SYSTEM_PLL2_DIV4 011 - M7_ALT_PLL_CLK 100 - SYSTEM_PLL1_CLK 101 - AUDIO_PLL1_CLK 110 - VIDEO_PLL_CLK 111 - SYSTEM_PLL3_CLK ... ... ... but in the source code, the imx8mn_m7_sels clocks list contains vpu_pll for the source select bits 011b. So, let's rename "vpu_pll" to "m7_alt_pll" to be consistent with the RM. The IMX8MN_VPU_* constants have not been removed to ensure backward compatibility of the patch. No functional changes intended. Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Acked-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221117113637.1978703-2-dario.binacchi@amarulasolutions.com
2022-11-24clk: microchip: check for null return of devm_kzalloc()Hui Tang1-0/+6
Because of the possible failure of devm_kzalloc(), name might be NULL and will cause null pointer dereference later. Therefore, it might be better to check it and directly return -ENOMEM. Fixes: d39fb172760e ("clk: microchip: add PolarFire SoC fabric clock support") Signed-off-by: Hui Tang <tanghui20@huawei.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> [claudiu.beznea: s/refrence/reference/, s/possilble/possible] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221119054858.178629-1-tanghui20@huawei.com
2022-11-24Backmerge tag 'v6.1-rc6' into drm-nextDave Airlie7-10/+84
Linux 6.1-rc6 This is needed for drm-misc-next and tegra. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-11-23clk: rockchip: Fix memory leak in rockchip_clk_register_pll()Xiu Jianfeng1-0/+1
If clk_register() fails, @pll->rate_table may have allocated memory by kmemdup(), so it needs to be freed, otherwise will cause memory leak issue, this patch fixes it. Fixes: 90c590254051 ("clk: rockchip: add clock type for pll clocks and pll used on rk3066") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20221123091201.199819-1-xiujianfeng@huawei.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-23clk: qcom: gcc-sc8280xp: add cxo as parent for three ufs ref clksShazad Hussain1-0/+6
The three UFS reference clocks, gcc_ufs_ref_clkref_clk for external UFS devices, gcc_ufs_card_clkref_clk and gcc_ufs_1_card_clkref_clk for two PHYs are all sourced from CXO. Added parent_data for all three reference clocks described above to reflect that all three clocks are sourced from CXO to have valid frequency for the ref clock needed by UFS controller driver. Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver") Link: https://lore.kernel.org/lkml/Y2Tber39cHuOSR%2FW@hovoldconsulting.com/ Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com> Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Link: https://lore.kernel.org/r/20221115152956.21677-1-quic_shazhuss@quicinc.com Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-23clk: fractional-divider: Regroup inclusionsAndy Shevchenko1-3/+4
For the better maintenance regroup inclusions as follows: - split CCF related headers in its own group - order groups from generic to particular - sort each group alphabetically Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221122130732.48537-3-andriy.shevchenko@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-23clk: fractional-divider: Show numerator and denominator in debugfsAndy Shevchenko1-0/+36
It's very useful to see what are the values of the fractional divider. For that, add respective debugfs files. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221122130732.48537-2-andriy.shevchenko@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-23clk: fractional-divider: Split out clk_fd_get_div() helperAndy Shevchenko1-6/+16
Split out clk_fd_get_div() helper for the future use elsewhere. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221122130732.48537-1-andriy.shevchenko@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-23clk: spear: Fix SSP clock definition on SPEAr600Kory Maincent1-3/+3
There is no SPEAr600 device named "ssp-pl022.x". Instead, the description of the SSP (Synchronous Serial Port) was recently added to the Device Tree, and the device name is "xxx.spi", so we should associate the SSP gateable clock to these device names. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20221115135814.214388-3-kory.maincent@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-23clk: spear: Fix CLCD clock definition on SPEAr600Kory Maincent1-1/+1
There is no SPEAr600 device named "clcd". Instead, the description of the CLCD (color liquid crystal display controller) name is "fc200000.clcd", so we should associate the CLCD gateable clock to this device name. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20221115135814.214388-2-kory.maincent@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-23clk: Remove a useless includeChristophe JAILLET3-3/+0
<linux/rational.h> is not needed for these drivers. Remove the corresponding #include. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/12dd5cb49efa7714f8e0389e4c7b3bc829e8a90e.1668289299.git.christophe.jaillet@wanadoo.fr Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-23clk: ti: fix typo in ti_clk_retry_init() code commentDario Binacchi1-1/+1
Replace "not" with "node". Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20221106155625.3476564-1-dario.binacchi@amarulasolutions.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-23clk: ti: dra7-atl: don't allocate `parent_names' variableDario Binacchi1-12/+2
The `parent_names' variable was freed also in case of kzalloc() error. Instead of modifying the code to perform a proper memory release, I decided to fix the bug by not allocating memory. Since only one parent name is referenced, it is not necessary to allocate this variable at runtime and therefore you can avoid calling the kzalloc() function. This simplifies the code (even calls to kfree can be removed) and improves the performance of the routine. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20221113181147.1626585-2-dario.binacchi@amarulasolutions.com Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-23clk: ti: change ti_clk_register[_omap_hw]() APIDario Binacchi12-42/+41
The ti_clk_register() and ti_clk_register_omap_hw() functions are always called with the parameter of type "struct device" set to NULL, since the functions from which they are called always have a parameter of type "struct device_node". Replacing "struct device" type parameter with "struct device_node" will allow you to register a TI clock to the common clock framework by taking advantage of the facilities provided by the "struct device_node" type. Further, adding the "of_" prefix to the name of these functions explicitly binds them to the "struct device_node" type. The patch has been tested on a Beaglebone board. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20221113181147.1626585-1-dario.binacchi@amarulasolutions.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-23Merge tag 'clk-microchip-fixes-6.1' of ↵Stephen Boyd1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-fixes Pull Microchip clk driver fixes from Claudiu Beznea: - fix the clock ID for USB device port on AT91 RM9200 SoCs; along with it the device tree references to this clocks were fixed in this patch to ease the backporting and to avoid USB driver probe failure. * tag 'clk-microchip-fixes-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: rm9200: fix usb device clock id
2022-11-23Merge tag 'samsung-clk-6.2' of ↵Stephen Boyd2-4/+6
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-fixes Pull Samsung SoC clk driver fixes from Krzysztof Kozlowski: - Fix calling of_device_get_match_data() on wrong device (parent's) in Exynos clock out driver - Correct clock name in bindings of ExynosAutov9 clocks - Correct parents of div4 clock on Exynos7885 * tag 'samsung-clk-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: clk: samsung: Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()" dt-bindings: clock: exynosautov9: fix reference to CMU_FSYS1 clk: samsung: exynos7885: Correct "div4" clock parents
2022-11-22clk: imx: imxrt1050: add IMXRT1050_CLK_LCDIF_PIX clock gateGiulio Benetti1-0/+1
Add IMXRT1050_CLK_LCDIF_PIX clock gate. Cc: Jesse Taube <mr.bossman075@gmail.com> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Acked-by: Jesse Taube <mr.bossman075@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221117181014.851505-2-giulio.benetti@benettiengineering.com
2022-11-22clk: imx: imxrt1050: fix IMXRT1050_CLK_LCDIF_APB offsetsGiulio Benetti1-1/+1
Fix IMXRT1050_CLK_LCDIF_APB offsets. Fixes: 7154b046d8f3 ("clk: imx: Add initial support for i.MXRT1050 clock driver") Cc: Jesse Taube <mr.bossman075@gmail.com> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221117181014.851505-1-giulio.benetti@benettiengineering.com
2022-11-22clk: imx8mp: Add audio shared gateAbel Vesa1-1/+11
According to the RM, the CCGR101 is shared for the following root clocks: - AUDIO_AHB_CLK_ROOT - AUDIO_AXI_CLK_ROOT - SAI1_CLK_ROOT - SAI2_CLK_ROOT - SAI3_CLK_ROOT - SAI5_CLK_ROOT - SAI6_CLK_ROOT - SAI7_CLK_ROOT - PDM_CLK_ROOT IMX8MP_CLK_AUDIO_ROOT is same as AUDIO_AHB_CLK_ROOT which can avoid break any users. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/1667811007-19222-3-git-send-email-shengjiu.wang@nxp.com
2022-11-22clk: imx: pll14xx: Add 320 MHz and 640 MHz entries for PLL146xMarek Vasut1-0/+2
The PLL146x is used to implement SYS_PLL3 on i.MX8MP and can be used to drive UARTn_ROOT clock. By setting the PLL3 to 320 MHz or 640 MHz, the PLL3 output can be divided down to supply UARTn_ROOT clock with precise 64 MHz, which divided down further by 16x oversampling factor used by the i.MX UART core yields 4 Mbdps baud base for the UART IP. This is useful e.g. for BCM bluetooth chips, which can operate up to 4 Mbdps. Add 320 MHz and 640 MHz entries so the PLL can be configured accordingly. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221031204838.195292-1-marex@denx.de
2022-11-22clk: imx93: keep sys ctr clock always onJacky Bai1-1/+2
Keep sys ctr clock always on to make sure its register can be accessed for cpuidle. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221028095211.2598312-7-peng.fan@oss.nxp.com
2022-11-22clk: imx: keep hsio bus clock always onJacky Bai1-1/+5
During Linux System suspend/resume stress test after System Sleep enabled, system will stuck sometimes. It is because NICMIX is powered down, which HSIOMIX(always on) is not powered down. When NICMIX powering down, HSIOMIX will get a hardware handshake, without HSIO ROOT clk, the handshake will lose. Then after NICMIX power on when system resume, the access to HSIOMIX through NICMIX would be broken. So keep HSIO ROOT always on. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221028095211.2598312-6-peng.fan@oss.nxp.com
2022-11-21clk: imx93: drop tpm1/3, lpit1/2 clkPeng Fan1-8/+4
Per Reference Mannual System Clocks Table, LPIT1 and TPM1 sources from bus_aon_root LPIT2 and TPM3 sources from bus_wakeup_root So update driver to reflect that. Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221028095211.2598312-5-peng.fan@oss.nxp.com
2022-11-21clk: imx93: correct enet clockPeng Fan1-1/+1
Per update Reference Mannual, correct the enet clock parent to wakeup_axi_root. Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk") Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221028095211.2598312-3-peng.fan@oss.nxp.com
2022-11-21clk: imx93: unmap anatop base in error handling pathPeng Fan1-6/+9
The anatop base is not unmapped during error handling path, fix it. Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221028095211.2598312-2-peng.fan@oss.nxp.com
2022-11-21clk: imx: imx8mp: add shared clk gate for usb suspend clkLi Jun1-1/+3
32K usb suspend clock gate is shared with usb_root_clk, this shared clock gate was initially defined only for usb suspend clock, usb suspend clk is kept on while system is active or system sleep with usb wakeup enabled, so usb root clock is fine with this situation; with the commit cf7f3f4fa9e5 ("clk: imx8mp: fix usb_root_clk parent"), this clock gate is changed to be for usb root clock, but usb root clock will be off while usb is suspended, so usb suspend clock will be gated too, this cause some usb functionalities will not work, so define this clock to be a shared clock gate to conform with the real HW status. Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver") Cc: stable@vger.kernel.org # v5.19+ Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/1664549663-20364-2-git-send-email-jun.li@nxp.com
2022-11-21clk: imx93: correct the flexspi1 clock settingHaibo Chen1-1/+1
Correct IMX93_CLK_FLEXSPI1_GATE CCGR setting. Otherwise the flexspi always can't be assigned to a parent clock when dump the clock tree. Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk") Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/1666589199-1199-1-git-send-email-haibo.chen@nxp.com
2022-11-19clk: tegra: Support BPMP-FW ABI deny flagsPeter De Schrijver1-3/+34
Support BPMP_CLK_STATE_CHANGE_DENIED by not populating state changing operations when the flag is set. Support BPMP_CLK_RATE_PARENT_CHANGE_DENIED by not populating rate or parent changing operations when the flag is set. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-11-17ARM: at91: rm9200: fix usb device clock idMichael Grzeschik1-1/+1
Referring to the datasheet the index 2 is the MCKUDP. When enabled, it "Enables the automatic disable of the Master Clock of the USB Device Port when a suspend condition occurs". We fix the index to the real UDP id which "Enables the 48 MHz clock of the USB Device Port". Cc: nicolas.ferre@microchip.com Cc: ludovic.desroches@microchip.com Cc: alexandre.belloni@bootlin.com Cc: mturquette@baylibre.com Cc: sboyd@kernel.org Cc: claudiu.beznea@microchip.com Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@pengutronix.de Fixes: 02ff48e4d7f7 ("clk: at91: add at91rm9200 pmc driver") Fixes: 0e0e528d8260 ("ARM: dts: at91: rm9200: switch to new clock bindings") Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221114185923.1023249-2-m.grzeschik@pengutronix.de
2022-11-16clk: sunxi-ng: f1c100s: Add IR mod clockAndre Przywara2-2/+11
For some reason the mod clock for the Allwinner F1C100s CIR (infrared receiver) peripheral was not modeled in the CCU driver. Add the clock description to the list, and wire it up in the clock list. By assigning a new clock ID at the end, it extends the number of clocks. This allows to use the CIR peripheral on any F1C100s series board. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221107005433.11079-5-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-16clk: sunxi-ng: v3s: Correct the header guard of ccu-sun8i-v3s.hWei Li1-3/+3
Rename the header guard of ccu-sun8i-v3s.h from _CCU_SUN8I_H3_H_ to _CCU_SUN8I_V3S_H_ what corresponding with the file name. Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Wei Li <liwei391@huawei.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221108094335.3597008-1-liwei391@huawei.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-16clk: renesas: r8a779f0: Fix Ethernet Switch clocksGeert Uytterhoeven1-2/+2
The RSwitch2 and EtherTSN-IF clocks were accidentally mixed up. While at it, rename them to better match the (future) documentation. Fixes: a3b4137a4d4023e6 ("clk: renesas: r8a779f0: Add Ethernet Switch clocks") Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/99b8b41bd2c5043c9e457862ef4bc144869eca58.1668501212.git.geert+renesas@glider.be
2022-11-15clk: qcom: Add display clock controller driver for SM6375Konrad Dybcio3-0/+620
Add support for the display clock controller found on SM6375. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221115155808.10899-2-konrad.dybcio@linaro.org
2022-11-15clk: rockchip: add clock controller for the RK3588Elaine Zhang5-1/+3447
Add full clock controller support RK3588. [rebase, integrate fixes from Wyon and Finley, add missing frequencies to PLL lookup table, update commit message, add GATE_LINK clocks which downstream handles in its own driver with one DT node per clock] Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com> Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221018151407.63395-10-sebastian.reichel@collabora.com [dropped module stuff after talking to Sebastian] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-15clk: samsung: Revert "clk: samsung: exynos-clkout: Use ↵Marek Szyprowski1-2/+4
of_device_get_match_data()" of_device_get_match_data() function should not be used on the device other than the one matched to the given driver, because it always returns the match_data of the matched driver. In case of exynos-clkout driver, the code matched the OF IDs on the PARENT device, so replacing it with of_device_get_match_data() broke the driver. This reverts commit 777aaf3d1daf793461269b49c063aca1cee06a44. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 777aaf3d1daf ("clk: samsung: exynos-clkout: Use of_device_get_match_data()") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221108213718.32076-1-m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-11-15clk: renesas: r8a779g0: Add Z0 clock supportGeert Uytterhoeven1-0/+1
Add support for the Z0 (Cortex-A76 Sub-System) clock on R-Car V4H, based on the existing support for Z clocks on R-Car Gen4. Extracted from a patch in the BSP by LUU HOAI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/75daa1fd8fa7eaef7b8945bb5906c787222c7ac4.1668423063.git.geert+renesas@glider.be
2022-11-14clk: rockchip: add lookup table supportSebastian Reichel2-15/+40
Add support for mapping reset IDs to register offsets to support gapless continous platform reset IDs. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221018151407.63395-9-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-14clk: rockchip: simplify rockchip_clk_add_lookupSebastian Reichel2-10/+6
rockchip_clk_add_lookup is only called from within the file, so it can be made static. The additional checks are removed with the following reasoning: 1. The data structure is initialized by rockchip_clk_init(), which is called by all rockchip platforms before the clocks are registered. Not doing so would result in an incomplete clock tree at the moment, which is a fatal error. In other parts of the kernel these kind of checks are usually omitted, so this was done here. The alternative is adding a pr_err to inform the kernel programmer adding a new platform about his incorrect code. Apart from that we are also not checking if the clock id is within the array boundings. 2. While not used so far by any rockchip platform, 0 is a valid clock identifier. To align rockchip closer to other ARM platforms we will start using it with rk3588. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221018151407.63395-8-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-14clk: rockchip: allow additional mux options for cpu-clock frequency changesElaine Zhang2-0/+43
In order to improve the main frequency of CPU, the clock path of CPU is simplified as follows: |--\ | \ |--\ --apll--|\ | \ | \ | |--apll_core--| \ | \ --24M---|/ |mux1 |--[gate]--|mux2|---clk_core | / | / --gpll--|\ | / |------| / | |--gpll_core--| / | |--/ --24M---|/ |--/ | | -------apll_directly--------------| When the CPU requests high frequency, we want to use MUX2 select the "apll_directly". At low frequencies use MUX1 to select “apll_core" and then MUX2 to select "apll_core_gate". However, in this way, the CPU frequency conversion needs to be in the following order: 1. MUX2 select to "apll_core_gate", MUX1 select "gpll_core" 2. Apll sets slow_mode, sets APLL parameters, locks APLL, and then APLL sets normal_mode 3. MUX1 select "apll_core", MUX2 select "apll_directly" So add pre_mux and post_mux options to cover this special requirements. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> [rebase] Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221018151407.63395-7-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-14clk: rockchip: add pll type for RK3588Elaine Zhang2-1/+235
Add RK3588 PLL support fully relying on lookup tables like the other upstream supported rockchip platforms. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> [rebase and modify code to avoid PLL parameter calculation] Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221018151407.63395-6-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-14clk: rockchip: add register offset of the cores select parentElaine Zhang2-8/+23
The cores select parent register is special on RK3588. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221018151407.63395-5-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-10clk: qcom: Add SC8280XP display clock controllerBjorn Andersson3-0/+3228
The Qualcomm SC8280XP platform has two display clock controller instances, add support for these. Duplication between the two implementations is reduced by reusing any constant data between the two sets of clock data. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220926203800.16771-3-quic_bjorande@quicinc.com
2022-11-08clk: meson: pll: add pcie lock retry workaroundHeiner Kallweit1-4/+8
The PCIe PLL locking may be unreliable under some circumstance, such as high or low temperature. If the PLL fails to lock, reset it a try again. This helps on the S905X4 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> [commit message amend] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/cc80cda0-4dda-2e3e-3fc8-afa97717479b@gmail.com
2022-11-08clk: meson: pll: adjust timeout in meson_clk_pll_wait_lock()Heiner Kallweit1-4/+4
Currently we loop over meson_parm_read() up to 24mln times. This results in a unpredictable timeout period. In my case it's over 5s on a S905X4-based system. Make the timeout period predictable and set it to 100ms. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/a801afc0-a8f2-a0a4-0f2b-a7201351d563@gmail.com
2022-11-08clk: renesas: r8a779g0: Add CMT clocksWolfram Sang1-0/+4
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221104151135.4706-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 21:31:46 +0300