summaryrefslogtreecommitdiff
path: root/drivers/clk/qcom
AgeCommit message (Collapse)AuthorFilesLines
2024-01-26clk: qcom: dispcc-sm8550: Update disp PLL settingsKonrad Dybcio1-0/+8
[ Upstream commit febd251d8775c4fb6e4acd6b5d7b0ed707f4611f ] The settings in the driver seem to have been taken from an older release. Update them to match the latest values. Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-8-ce1272d77540@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26clk: qcom: gcc-sm8550: Mark RCGs shared where applicableKonrad Dybcio1-43/+43
[ Upstream commit 929c75d575667af389c8a9e03cebc93d43bb7f31 ] The vast majority of shared RCGs were not marked as such. Fix it. Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-6-ce1272d77540@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26clk: qcom: gcc-sm8550: use collapse-voting for PCIe GDSCsKonrad Dybcio1-0/+8
[ Upstream commit 7e77a39265293ea4f05e20fff180755503c49918 ] The PCIe GDSCs can be shared with other masters and should use the APCS collapse-vote register when updating the power state. This is specifically also needed to be able to disable power domains that have been enabled by boot firmware using the vote register. Following other recent Qualcomm platforms, describe this register and the corresponding mask for the PCIe (and _phy) GDSCs. Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-5-ce1272d77540@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26clk: qcom: gcc-sm8550: Mark the PCIe GDSCs votableKonrad Dybcio1-4/+4
[ Upstream commit e7fe73fc6b68ee97b1e8f124a66a5ee50d8d5e5b ] The PCIe GDSCs on most Qualcomm platforms expect the OS to always consider collapse requests as successful. This also concerns SM8550. Add the VOTABLE flag to the GDSCs in question to comply with these expectations. Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-4-ce1272d77540@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flagKonrad Dybcio1-8/+8
[ Upstream commit 1fe8273c8d4088dd68faaab8640ec95f381cbf1e ] All of the 8550's GCC GDSCs can and should use the retain registers so as not to lose their state when entering lower power modes. Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-3-ce1272d77540@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26clk: qcom: videocc-sm8150: Add missing PLL config propertySatya Priya Kakitapalli1-0/+1
[ Upstream commit 71f130c9193f613d497f7245365ed05ffdb0a401 ] When the driver was ported upstream, PLL test_ctl_hi1 register value was omitted. Add it to ensure the PLLs are fully configured. Fixes: 5658e8cf1a8a ("clk: qcom: add video clock controller driver for SM8150") Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-3-56bec3a5e443@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26clk: qcom: videocc-sm8150: Update the videocc resetsSatya Priya Kakitapalli1-0/+4
[ Upstream commit 1fd9a939db24d2f66e48f8bca3e3654add3fa205 ] Add all the available resets for the video clock controller on sm8150. Fixes: 5658e8cf1a8a ("clk: qcom: add video clock controller driver for SM8150") Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-2-56bec3a5e443@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26clk: qcom: gpucc-sm8150: Update the gpu_cc_pll1 configSatya Priya Kakitapalli1-2/+2
[ Upstream commit 6ebd9a4f8b8d2b35cf965a04849c4ba763722f13 ] Update the test_ctl_hi_val and test_ctl_hi1_val of gpu_cc_pll1 as per latest HW recommendation. Fixes: 0cef71f2ccc8 ("clk: qcom: Add graphics clock controller driver for SM8150") Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231122042814.4158076-1-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocksKathiravan Thirumoorthy1-6/+0
commit 99cd4935cb972d0aafb16838bb2aeadbcaf196ce upstream. GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based on the request from dependent clocks. Doing so will result in the unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL clocks. Cc: stable@vger.kernel.org Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support") Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-2-c8ceb1a37680@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocksKathiravan Thirumoorthy1-6/+0
commit e641a070137dd959932c7c222e000d9d941167a2 upstream. GPLL, NSS crypto PLL clock rates are fixed and shouldn't be scaled based on the request from dependent clocks. Doing so will result in the unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the PLL clocks. Cc: stable@vger.kernel.org Fixes: b8e7e519625f ("clk: qcom: ipq8074: add remaining PLL’s") Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-1-c8ceb1a37680@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-20clk: qcom: ipq5332: drop the CLK_SET_RATE_PARENT flag from GPLL clocksKathiravan Thirumoorthy1-2/+0
[ Upstream commit 5635ef0bd1052420bc659a00be6fd0c60cec5cb9 ] GPLL clock rates are fixed and shouldn't be scaled based on the request from dependent clocks. Doing so will result in the unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the GPLL clocks. Fixes: 3d89d52970fd ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC") Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-5-c8ceb1a37680@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20clk: qcom: ipq9574: drop the CLK_SET_RATE_PARENT flag from GPLL clocksKathiravan Thirumoorthy1-4/+0
[ Upstream commit 99a8f8764b70158a712992640a6be46a8fd79d15 ] GPLL clock rates are fixed and shouldn't be scaled based on the request from dependent clocks. Doing so will result in the unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the GPLL clocks. ---- Changes in V2: - No changes Fixes: d75b82cff488 ("clk: qcom: Add Global Clock Controller driver for IPQ9574") Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-4-c8ceb1a37680@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20clk: qcom: ipq5018: drop the CLK_SET_RATE_PARENT flag from GPLL clocksKathiravan Thirumoorthy1-3/+0
[ Upstream commit 01a5e4c6731ab6b4b74822661d296f8893fc1230 ] GPLL clock rates are fixed and shouldn't be scaled based on the request from dependent clocks. Doing so will result in the unexpected behaviour. So drop the CLK_SET_RATE_PARENT flag from the GPLL clocks. ---- Changes in V2: - New patch Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018") Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-3-c8ceb1a37680@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_configVaradarajan Narayanan1-1/+1
[ Upstream commit 5b7a4d3d2b33398330aef69e0ff5656273483587 ] The earlier 'l' value of 0x3e is for 1.5GHz. Not all SKUs support this frequency. Hence set it to 0x2d to get 1.1GHz which is supported in all SKUs. The frequency can still increase above this initial configuration made here when the cpufreq driver picks a different OPP. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Fixes: c7ef7fbb1ccf ("clk: qcom: apss-ipq-pll: add support for IPQ5332") Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/00e6be6cb9cee56628123a64ade118d0a752018b.1697781921.git.quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pllVaradarajan Narayanan1-1/+1
[ Upstream commit 267e29198436a8cb6770213471f72502c895096a ] The set rate and determine rate operations are different between Stromer and Stromer Plus PLLs. Since the programming sequence is different, the PLLs dont get configured properly and random, inexplicable crash/freeze is seen. Hence, use stromer plus ops for ipq_pll_stromer_plus. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Fixes: c7ef7fbb1ccf ("clk: qcom: apss-ipq-pll: add support for IPQ5332") Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/c86ecaa23dc4f39650bcf4a3bd54a617a932e4fd.1697781921.git.quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20clk: qcom: clk-alpha-pll: introduce stromer plus opsVaradarajan Narayanan2-0/+64
[ Upstream commit 84da48921a97cee3dd1391659e93ee01d122b78b ] Stromer plus APSS PLL does not support dynamic frequency scaling. To switch between frequencies, we have to shut down the PLL, configure the L and ALPHA values and turn on again. So introduce the separate set of ops for Stromer Plus PLL. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/2affa6c63ff0c4342230623a7d4eef02ec7c02d4.1697781921.git.quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Stable-dep-of: 267e29198436 ("clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20clk: qcom: config IPQ_APSS_6018 should depend on QCOM_SMEMVaradarajan Narayanan1-0/+1
[ Upstream commit 6a15647d0adc686226045e8046369f34d6ab03ed ] The config IPQ_APSS_6018 should depend on QCOM_SMEM, to avoid the following error reported by 'kernel test robot' loongarch64-linux-ld: drivers/clk/qcom/apss-ipq6018.o: in function `apss_ipq6018_probe': >> apss-ipq6018.c:(.text+0xd0): undefined reference to `qcom_smem_get_soc_id' Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller") Reported-by: kernel test robot <yujie.liu@intel.com> Closes: https://lore.kernel.org/r/202310181650.g8THtfsm-lkp@intel.com/ Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/f4c4d65a7cb71e807d6d472c63c7718408c8f5f0.1697781921.git.quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20clk: qcom: gcc-sm8150: Fix gcc_sdcc2_apps_clk_srcDanila Tikhonov1-1/+1
[ Upstream commit 7138c244fb293f24ce8ab782961022eff00a10c4 ] Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg didn't update its configuration" error. Fixes: 2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150") Tested-by: Arseniy Velikanov <adomerlee@gmail.com> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230913175612.8685-1-danila@jiaxyga.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20clk: qcom: mmcc-msm8998: Fix the SMMU GDSCKonrad Dybcio1-1/+3
[ Upstream commit 1fc62c8347397faf4e18249e88ecd4470c0a5357 ] The SMMU GDSC doesn't have to be ALWAYS-ON and shouldn't feature the HW_CTRL flag (it's separate from hw_ctrl_addr). In addition to that, it should feature a cxc entry for bimc_smmu_axi_clk and be marked as votable. Fix all of these issues. Fixes: d14b15b5931c ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-5-ba1b1fd9ee75@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20clk: qcom: mmcc-msm8998: Don't check halt bit on some branch clksKonrad Dybcio1-0/+3
[ Upstream commit 9906c4140897bbdbff7bb71c6ae67903cb9954ce ] Some branch clocks are governed externally and we're only supposed to send a request concerning their shutdown, not actually ensure it happens. Use the BRANCH_HALT_SKIP define to skip checking the halt bit. Fixes: d14b15b5931c ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver") Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-4-ba1b1fd9ee75@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20clk: qcom: clk-rcg2: Fix clock rate overflow for high parent frequenciesDevi Priya1-10/+4
[ Upstream commit f7b7d30158cff246667273bd2a62fc93ee0725d2 ] If the parent clock rate is greater than unsigned long max/2 then integer overflow happens when calculating the clock rate on 32-bit systems. As RCG2 uses half integer dividers, the clock rate is first being multiplied by 2 which will overflow the unsigned long max value. Hence, replace the common pattern of doing 64-bit multiplication and then a do_div() call with simpler mult_frac call. Fixes: bcd61c0f535a ("clk: qcom: Add support for root clock generators (RCGs)") Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20230901073640.4973-1-quic_devipriy@quicinc.com [bjorn: Also drop unnecessary {} around single statements] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20clk: qcom: gcc-msm8996: Remove RPM bus clocksKonrad Dybcio1-232/+5
[ Upstream commit 4afda5f6bcdf673ef2556fcfa458daf3a5a648d8 ] The GCC driver contains clocks that are owned (meaning configured and scaled) by the RPM core. Remove them from Linux to stop interjecting the RPM's logic. Fixes: b1e010c0730a ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230830-topic-rpmbusclocks8996gcc-v1-1-9e99bedcdc3b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20clk: qcom: ipq5332: Drop set rate parent from gpll0 dependent clocksVaradarajan Narayanan1-2/+0
[ Upstream commit ccd8ab030643040600a663edde56b434b6f4fb6c ] IPQ5332's GPLL0's nominal/turbo frequency is 800MHz. This must not be scaled based on the requirement of dependent clocks. Hence remove the CLK_SET_RATE_PARENT flag. Fixes: 3d89d52970fd ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC") Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com> Link: https://lore.kernel.org/r/1693474133-10467-1-git-send-email-quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-31Merge branch 'clk-qcom' into clk-nextStephen Boyd34-1188/+4598
* clk-qcom: (87 commits) clk: qcom: Fix SM_GPUCC_8450 dependencies clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags clk: qcom: gcc-ipq5018: change some variable static clk: qcom: gcc-ipq4019: add missing networking resets dt-bindings: clock: qcom: ipq4019: add missing networking resets clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRC dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRC clk: qcom: gcc-qdu1000: Update the RCGs ops clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops clk: qcom: gcc-qdu1000: Add support for GDSCs clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock clk: qcom: gcc-qdu1000: Fix clkref clocks handling clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock clk: qcom: ipq5332: drop the mem noc clocks clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks ...
2023-08-31Merge branches 'clk-imx', 'clk-samsung', 'clk-annotate', 'clk-marvell' and ↵Stephen Boyd2-2/+2
'clk-lmk' into clk-next - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Remove non-OF mmp clk drivers - Move number of clks from DT headers to drivers * clk-imx: clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz clk: imx: pll14xx: align pdiv with reference manual clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op clk: imx25: make __mx25_clocks_init return void clk: imx25: print silicon revision during init dt-bindings: clocks: imx8mp: make sai4 a dummy clock clk: imx8mp: fix sai4 clock clk: imx: imx8ulp: update SPLL2 type clk: imx: pllv4: Fix SPLL2 MULT range clk: imx: imx8: add audio clock mux driver dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource() clk: imx: clk-gpr-mux: Simplify .determine_rate() clk: imx: Add 519.75MHz frequency support for imx9 pll clk: imx93: Add PDM IPG clk dt-bindings: clock: imx93: Add PDM IPG clk * clk-samsung: dt-bindings: clock: samsung: remove define with number of clocks clk: samsung: exynoautov9: do not define number of clocks in bindings clk: samsung: exynos850: do not define number of clocks in bindings clk: samsung: exynos7885: do not define number of clocks in bindings clk: samsung: exynos5433: do not define number of clocks in bindings clk: samsung: exynos5420: do not define number of clocks in bindings clk: samsung: exynos5410: do not define number of clocks in bindings clk: samsung: exynos5260: do not define number of clocks in bindings clk: samsung: exynos5250: do not define number of clocks in bindings clk: samsung: exynos4: do not define number of clocks in bindings clk: samsung: exynos3250: do not define number of clocks in bindings * clk-annotate: clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with __counted_by clk: Annotate struct clk_hw_onecell_data with __counted_by * clk-marvell: clk: pxa910: Move number of clocks to driver source clk: pxa1928: Move number of clocks to driver source clk: pxa168: Move number of clocks to driver source clk: mmp2: Move number of clocks to driver source clk: mmp: Remove old non-OF clock drivers * clk-lmk: clk: lmk04832: Support using PLL1_LD as SPI readback pin clk: lmk04832: Don't disable vco clock on probe fail clk: lmk04832: Set missing parent_names for output clocks
2023-08-30clk: qcom: Fix SM_GPUCC_8450 dependenciesNathan Chancellor1-0/+1
CONFIG_SM_GCC_8450 depends on ARM64 but it is selected by CONFIG_SM_GPUCC_8450, which can be selected on ARM, resulting in a Kconfig warning. WARNING: unmet direct dependencies detected for SM_GCC_8450 Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n]) Selected by [y]: - SM_GPUCC_8450 [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] Add the same dependencies to CONFIG_SM_GPUCC_8450 to resolve the warning. Fixes: 728692d49edc ("clk: qcom: Add support for SM8450 GPUCC") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230829-fix-sm_gpucc_8550-deps-v1-1-d751f6cd35b2@kernel.org Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-22clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with ↵Kees Cook1-1/+1
__counted_by Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct spmi_pmic_div_clk_cc. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Bjorn Andersson <andersson@kernel.org> Cc: Andy Gross <agross@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-arm-msm@vger.kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230817202941.never.657-kees@kernel.org Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-22clk: Annotate struct clk_hw_onecell_data with __counted_byKees Cook1-1/+1
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct clk_hw_onecell_data. Additionally, since the element count member must be set before accessing the annotated flexible array member, move its initialization earlier. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Taichi Sugaya <sugaya.taichi@socionext.com> Cc: Takao Orito <orito.takao@socionext.com> Cc: Qin Jian <qinjian@cqplus1.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Samuel Holland <samuel@sholland.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: dri-devel@lists.freedesktop.org Cc: linux-sunxi@lists.linux.dev Cc: linux-phy@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230817203019.never.795-kees@kernel.org Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-18clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoCKonrad Dybcio1-1/+1
On all supported SoCs to date, the PCNoC (a.k.a CNoC_PERIPH) clock must be always-on as long as the APSS is online and only has to run at 19.2 MHz. Define it to be as such in the ACTIVE domain. Some SoCs use that clock for bus scaling, while others just need it for reaching the hardware. This commit will hurt neither. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230731-topic-pcnoc-v1-2-452dd36d11d7@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-18clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flagsKonrad Dybcio1-8/+15
Some clocks, at least PCNoC (a.k.a CNoC_PERIPH) need to be always on, at least on the ACTIVE side, regardless of whether they're used for bus scaling or not. Introduce a new macro to preset non-INT_MAX rates and clk flags to make it easy and work implicitly through the CCF. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230731-topic-pcnoc-v1-1-452dd36d11d7@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-18clk: qcom: gcc-ipq5018: change some variable staticYang Yingliang1-2/+2
lpass_axim_clk_src and lpass_sway_clk_src are only used in gcc-ipq5018.c now, change them to static. Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230816080113.1222352-1-yangyingliang@huawei.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-15clk: qcom: gcc-ipq4019: add missing networking resetsRobert Marko1-0/+6
IPQ4019 has more networking related resets that will be required for future wired networking support, so lets add them. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20230814104119.96858-2-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRCOtto Pflüger1-1/+2
This is the parent clock of gpll0_early, so it needs to be enabled for gpll0_early to return the correct rate. Enable GPLL0_SLEEP_CLK_SRC by adding its existing definition to the clock list. This clock also doesn't work with clk_alpha_pll_ops, use clk_branch_simple_ops instead to make it enable and disable correctly. Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de> Link: https://lore.kernel.org/r/20230802170317.205112-3-otto.pflueger@abscue.de Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: gcc-qdu1000: Update the RCGs opsImran Shaik1-29/+29
The clock RCGs are required to be parked at safe clock source(XO) during disable as per the hardware expectation and clk_rcg2_shared_ops are the closest implementation for the same. Hence update the clock RCG ops to clk_rcg2_shared_ops. Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-9-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: gcc-qdu1000: Update the SDCC clock RCG opsImran Shaik1-2/+2
Update the GCC SDCC clock RCG ops to clk_rcg2_floor_ops to avoid the overclocking issues on QDU1000 and QRU1000 SoCs. Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-8-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: gcc-qdu1000: Add support for GDSCsImran Shaik1-0/+42
Add the GDSCs support for QDU1000 and QRU1000 SoCs. Co-developed-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-7-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk supportImran Shaik1-0/+21
Add the gcc_ddrss_ecpri_gsi_clk support as per the latest hardware version of QDU1000 and QRU100 SoCs. Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-6-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clockImran Shaik1-0/+1
gcc_gpll1_out_even clock is referenced as a parent, but not registered with the clock framework. Hence add support to register the same. Fixes: 1c9efb0bc040 ("clk: qcom: Add QDU1000 and QRU1000 GCC support") Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-5-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: gcc-qdu1000: Fix clkref clocks handlingImran Shaik1-6/+4
Update the GCC clkref clock's halt_check to BRANCH_HALT, as it's status bit is not inverted in the latest hardware version of QDU1000 and QRU1000 SoCs. While at it, fix the gcc clkref clock ops as well. Fixes: 1c9efb0bc040 ("clk: qcom: Add QDU1000 and QRU1000 GCC support") Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-4-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handlingImran Shaik1-17/+6
Fix the gcc pcie pipe clock handling as per the clk_regmap_phy_mux_ops implementation to let the clock framework automatically park the clock at XO when the clock is switched off and restore the parent when the clock is switched on. Fixes: 1c9efb0bc040 ("clk: qcom: Add QDU1000 and QRU1000 GCC support") Co-developed-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230803105741.2292309-3-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGsKonrad Dybcio1-2/+2
Use the floor ops to prevent warnings like this at suspend exit and boot: mmc0: Card appears overclocked; req 800000 Hz, actual 25000000 Hz Fixes: db0c944ee92b ("clk: qcom: Add clock driver for SM8450") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20230811-topic-8450_clk-v1-1-88031478d548@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clockKathiravan T1-72/+39
With the removal of the mem noc clocks in the commit e224dc703521 ("clk: qcom: gcc-ipq5332: drop the mem noc clocks"), we can drop the gcc_apss_axi_clk_src clock as well, since there are no clocks uses this clock as a parent. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Link: https://lore.kernel.org/r/20230710102807.1189942-3-quic_kathirav@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: ipq5332: drop the mem noc clocksKathiravan T1-95/+0
Due to the recent design changes, all the mem noc clocks will be configured by the bootloaders and it will be access protected by the TZ firmware. So drop these clocks from the GCC driver. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Link: https://lore.kernel.org/r/20230710102807.1189942-2-quic_kathirav@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: gcc-msm8998: Don't check halt bit on some branch clksKonrad Dybcio1-3/+3
Some branch clocks are governed externally and we're only supposed to send a request concerning their shutdown, not actually ensure it happens. Use the BRANCH_HALT_SKIP define to skip checking the halt bit. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-6-6222fbc2916b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: gpucc-msm8998: Use the correct GPLL0 leg with old DTsKonrad Dybcio1-1/+1
GPUCC has its own GPLL0 legs - one for 1-1 and one for div-2 output. Add .name lookup to make sure older DTs consume the correct clock. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-5-6222fbc2916b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: mmcc-msm8998: Properly consume GPLL0 inputsKonrad Dybcio1-27/+8
Up until now, the GPLL0_DIV MMSS input has been modeled as a fixed child of MMSS_GPLL0_DIV that's always-on. Properly representing the former in the GCC driver makes us unable to keep doing so. Consume MSS_GPLL0_DIV through fw_name ("gpll0_div") as well as add a fixed .name link to keep backwards compatibility. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-4-6222fbc2916b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-14clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properlyKonrad Dybcio1-0/+58
Up until now, we've been relying on some non-descript hardware magic to pinkypromise turn the clocks on for us. While new SoCs shine with that feature, MSM8998 can not always be fully trusted. Register the MMSS and GPUSS GPLL0 legs with the CCF to allow for manual enable voting. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-3-6222fbc2916b@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018Sricharan Ramabadhran3-0/+3733
Add support for the global clock controller found on IPQ5018 based devices. Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Co-developed-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Link: https://lore.kernel.org/r/1690533192-22220-3-git-send-email-quic_srichara@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-04clk: qcom: gcc-sm6350: Fix gcc_sdcc2_apps_clk_srcLuca Weiss1-0/+1
GPLL7 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg didn't update its configuration" error when booting. Set .flags = CLK_OPS_PARENT_ENABLE to fix the error. Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230804-sm6350-sdcc2-v1-1-3d946927d37d@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-04clk: qcom: reset: Use the correct type of sleep/delay based on lengthKonrad Dybcio1-1/+2
Use the fsleep() helper that (based on the length of the delay, see: [1]) chooses the correct sleep/delay functions. [1] https://www.kernel.org/doc/Documentation/timers/timers-howto.txt Fixes: 2cb8a39b6781 ("clk: qcom: reset: Allow specifying custom reset delay") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230726-topic-qcom_reset-v3-1-5958facd5db2@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 14:03:24 +0300