summaryrefslogtreecommitdiff
path: root/drivers/clk/mvebu
AgeCommit message (Collapse)AuthorFilesLines
2024-09-22clk: Switch back to struct platform_driver::remove()Uwe Kleine-König3-3/+3
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all clk drivers to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240909144026.870565-2-u.kleine-koenig@baylibre.com Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-31Merge branches 'clk-imx', 'clk-samsung', 'clk-annotate', 'clk-marvell' and ↵Stephen Boyd1-1/+1
'clk-lmk' into clk-next - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Remove non-OF mmp clk drivers - Move number of clks from DT headers to drivers * clk-imx: clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz clk: imx: pll14xx: align pdiv with reference manual clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op clk: imx25: make __mx25_clocks_init return void clk: imx25: print silicon revision during init dt-bindings: clocks: imx8mp: make sai4 a dummy clock clk: imx8mp: fix sai4 clock clk: imx: imx8ulp: update SPLL2 type clk: imx: pllv4: Fix SPLL2 MULT range clk: imx: imx8: add audio clock mux driver dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource() clk: imx: clk-gpr-mux: Simplify .determine_rate() clk: imx: Add 519.75MHz frequency support for imx9 pll clk: imx93: Add PDM IPG clk dt-bindings: clock: imx93: Add PDM IPG clk * clk-samsung: dt-bindings: clock: samsung: remove define with number of clocks clk: samsung: exynoautov9: do not define number of clocks in bindings clk: samsung: exynos850: do not define number of clocks in bindings clk: samsung: exynos7885: do not define number of clocks in bindings clk: samsung: exynos5433: do not define number of clocks in bindings clk: samsung: exynos5420: do not define number of clocks in bindings clk: samsung: exynos5410: do not define number of clocks in bindings clk: samsung: exynos5260: do not define number of clocks in bindings clk: samsung: exynos5250: do not define number of clocks in bindings clk: samsung: exynos4: do not define number of clocks in bindings clk: samsung: exynos3250: do not define number of clocks in bindings * clk-annotate: clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with __counted_by clk: Annotate struct clk_hw_onecell_data with __counted_by * clk-marvell: clk: pxa910: Move number of clocks to driver source clk: pxa1928: Move number of clocks to driver source clk: pxa168: Move number of clocks to driver source clk: mmp2: Move number of clocks to driver source clk: mmp: Remove old non-OF clock drivers * clk-lmk: clk: lmk04832: Support using PLL1_LD as SPI readback pin clk: lmk04832: Don't disable vco clock on probe fail clk: lmk04832: Set missing parent_names for output clocks
2023-08-23clk: mvebu: Convert to devm_platform_ioremap_resource()Yangtao Li2-6/+2
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230705065313.67043-13-frank.li@vivo.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-22clk: Annotate struct clk_hw_onecell_data with __counted_byKees Cook1-1/+1
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct clk_hw_onecell_data. Additionally, since the element count member must be set before accessing the annotated flexible array member, move its initialization earlier. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Taichi Sugaya <sugaya.taichi@socionext.com> Cc: Takao Orito <orito.takao@socionext.com> Cc: Qin Jian <qinjian@cqplus1.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Samuel Holland <samuel@sholland.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: dri-devel@lists.freedesktop.org Cc: linux-sunxi@lists.linux.dev Cc: linux-phy@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230817203019.never.795-kees@kernel.org Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-07-19clk: Explicitly include correct DT includesRob Herring2-2/+0
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Dinh Nguyen <dinguyen@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5 Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-20clk: mvebu: Iterate over possible CPUs instead of DT CPU nodesRob Herring1-11/+3
Rework iterating over DT CPU nodes to iterate over possible CPUs instead. There's no need to walk the DT CPU nodes again. Possible CPUs is equal to the number of CPUs defined in the DT. Using the "reg" value for an array index is fragile as it assumes "reg" is 0-N which often is not the case. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230327-mvebu-clk-fixes-v2-3-8333729ee45d@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-20clk: mvebu: Use of_get_cpu_hwid() to read CPU IDRob Herring1-8/+8
Use of_get_cpu_hwid() rather than the open coded reading of the CPU nodes "reg" property. The existing code is in fact wrong as the "reg" address cells size is 2 cells for arm64. The existing code happens to work because the DTS files are wrong as well. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230327-mvebu-clk-fixes-v2-2-8333729ee45d@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-15clk: mvebu: Use of_address_to_resource()Rob Herring1-5/+3
Replace of_get_property() and of_translate_address() calls with a single call to of_address_to_resource(). Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230406010738.1269781-1-robh@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-03-29clk: mvebu: Convert to platform remove callback returning voidUwe Kleine-König3-12/+6
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230312161512.2715500-22-u.kleine-koenig@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: mvebu: armada-37xx-tbg: Remove the unneeded result variableye xingchen1-4/+2
Return the value of_clk_add_hw_provider() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/20220906072322.337253-1-ye.xingchen@zte.com.cn Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-23clk: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210000.6600-1-wsa+renesas@sang-engineering.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-18clk: mvebu: use time_is_before_eq_jiffies() instead of open coding itWang Qing1-1/+2
Use the helper function time_is_{before,after}_jiffies() to improve code readability. Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1644890154-64915-3-git-send-email-wangqing@vivo.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-09-15clk: mvebu: ap-cpu-clk: Fix a memory leak in error handling pathsChristophe JAILLET1-3/+11
If we exit the for_each_of_cpu_node loop early, the reference on the current node must be decremented, otherwise there is a leak. Fixes: f756e362d938 ("clk: mvebu: add CPU clock driver for Armada 7K/8K") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/545df946044fc1fc05a4217cdf0054be7a79e49e.1619161112.git.christophe.jaillet@wanadoo.fr Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-29clk: kirkwood: Fix a clocking boot regressionLinus Walleij1-0/+1
Since a few kernel releases the Pogoplug 4 has crashed like this during boot: Unable to handle kernel NULL pointer dereference at virtual address 00000002 (...) [<c04116ec>] (strlen) from [<c00ead80>] (kstrdup+0x1c/0x4c) [<c00ead80>] (kstrdup) from [<c04591d8>] (__clk_register+0x44/0x37c) [<c04591d8>] (__clk_register) from [<c04595ec>] (clk_hw_register+0x20/0x44) [<c04595ec>] (clk_hw_register) from [<c045bfa8>] (__clk_hw_register_mux+0x198/0x1e4) [<c045bfa8>] (__clk_hw_register_mux) from [<c045c050>] (clk_register_mux_table+0x5c/0x6c) [<c045c050>] (clk_register_mux_table) from [<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0+0x13c/0x1ac) [<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0) from [<c0aceae0>] (of_clk_init+0x12c/0x214) [<c0aceae0>] (of_clk_init) from [<c0ab576c>] (time_init+0x20/0x2c) [<c0ab576c>] (time_init) from [<c0ab3d18>] (start_kernel+0x3dc/0x56c) [<c0ab3d18>] (start_kernel) from [<00000000>] (0x0) Code: e3130020 1afffffb e12fff1e c08a1078 (e5d03000) This is because the "powersave" mux clock 0 was provided in an unterminated array, which is required by the loop in the driver: /* Count, allocate, and register clock muxes */ for (n = 0; desc[n].name;) n++; Here n will go out of bounds and then call clk_register_mux() on random memory contents after the mux clock. Fix this by terminating the array with a blank entry. Fixes: 105299381d87 ("cpufreq: kirkwood: use the powersave multiplexer") Cc: stable@vger.kernel.org Cc: Andrew Lunn <andrew@lunn.ch> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210814235514.403426-1-linus.walleij@linaro.org Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-09clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0Pali Rohár1-6/+39
When CPU frequency is at 250 MHz and set_rate() is called with 500 MHz (L1) quickly followed by a call with 1 GHz (L0), the CPU does not necessarily stay in L1 for at least 20ms as is required by Marvell errata. This situation happens frequently with the ondemand cpufreq governor and can be also reproduced with userspace governor. In most cases it causes CPU to crash. This change fixes the above issue and ensures that the CPU always stays in L1 for at least 20ms when switching from any state to L0. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com> Tested-by: Philip Soares <philips@netisense.com> Fixes: 61c40f35f5cd ("clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to 1.2GHz") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-04-09clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHzPali Rohár1-5/+7
It was observed that the workaround introduced by commit 61c40f35f5cd ("clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to 1.2GHz") when base CPU frequency is 1.2 GHz is also required when base CPU frequency is 1 GHz. Otherwise switching CPU frequency directly from L2 (250 MHz) to L0 (1 GHz) causes a crash. When base CPU frequency is just 800 MHz no crashed were observed during switch from L2 to L0. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com> Tested-by: Philip Soares <philips@netisense.com> Fixes: 2089dc33ea0e ("clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-04-09clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clockMarek Behún1-28/+0
Remove the .set_parent method in clk_pm_cpu_ops. This method was supposed to be needed by the armada-37xx-cpufreq driver, but was never actually called due to wrong assumptions in the cpufreq driver. After this was fixed in the cpufreq driver, this method is not needed anymore. Signed-off-by: Marek Behún <kabel@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Pali Rohár <pali@kernel.org> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com> Tested-by: Philip Soares <philips@netisense.com> Fixes: 2089dc33ea0e ("clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-11clk: mvebu: ap-cpu-clk: Demote non-conformant kernel-doc headerLee Jones1-1/+1
Not much effort has been put into this one. Demote it for the time being at least. Fixes the following W=1 kernel build warning(s): drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'ratio_state_reg' not described in 'cpu_dfs_regs' drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'divider_mask' not described in 'cpu_dfs_regs' drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'cluster_offset' not described in 'cpu_dfs_regs' drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'force_mask' not described in 'cpu_dfs_regs' drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'divider_offset' not described in 'cpu_dfs_regs' drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'divider_ratio' not described in 'cpu_dfs_regs' drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'ratio_offset' not described in 'cpu_dfs_regs' drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'ratio_state_offset' not described in 'cpu_dfs_regs' drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'ratio_state_cluster_offset' not described in 'cpu_dfs_regs' Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Cc: Omri Itach <omrii@marvell.com> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-10-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-20clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9Terry Zhou1-2/+2
There is an error in the current code that the XTAL MODE pin was set to NB MPP1_31 which should be NB MPP1_9. The latch register of NB MPP1_9 has different offset of 0x8. Signed-off-by: Terry Zhou <bjzhou@marvell.com> [pali: Fix pin name in commit message] Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 7ea8250406a6 ("clk: mvebu: Add the xtal clock for Armada 3700 SoC") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201106100039.11385-1-pali@kernel.org Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-14clk: mvebu: ap80x-cpu: use semicolons rather than commas to separate statementsJulia Lawall1-1/+1
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1601233948-11629-10-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-11clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPERNathan Chancellor1-0/+1
When building arm32 allmodconfig: ld.lld: error: undefined symbol: ap_cp_unique_name >>> referenced by ap-cpu-clk.c >>> clk/mvebu/ap-cpu-clk.o:(ap_cpu_clock_probe) in archive drivers/built-in.a ap_cp_unique_name is only compiled into the kernel image when CONFIG_ARMADA_AP_CP_HELPER is selected (as it is not user selectable). However, CONFIG_ARMADA_AP_CPU_CLK does not select it. This has been a problem since the driver was added to the kernel but it was not built before commit c318ea261749 ("cpufreq: ap806: fix cpufreq driver needs ap cpu clk") so it was never noticed. Fixes: f756e362d938 ("clk: mvebu: add CPU clock driver for Armada 7K/8K") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20200701201128.2448427-1-natechancellor@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-05clk: Fix Kconfig indentationKrzysztof Kozlowski1-1/+1
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lkml.kernel.org/r/1574306335-29026-1-git-send-email-krzk@kernel.org [sboyd@kernel.org: Fixup mediatek to have two spaces for help indent] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-27Merge branches 'clk-ti', 'clk-allwinner', 'clk-qcom', 'clk-sa' and ↵Stephen Boyd2-4/+4
'clk-aspeed' into clk-next - Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Use struct_size() some more in various clk drivers * clk-ti: clk/ti/adpll: allocate room for terminating null ARM: dts: omap3: fix DPLL4 M4 divider max value clk: ti: divider: convert to use min,max,mask instead of width clk: ti: divider: cleanup ti_clk_parse_divider_data API clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table clk: ti: am43xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from pruss clkctrl clock clk: ti: am43xx: drop idlest polling from pruss clkctrl clock clk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap5: add IVA subsystem clkctrl data dt-bindings: clk: add omap5 iva clkctrl definitions clk: ti: clkctrl: add new exported API for checking standby info clk: ti: clkctrl: convert to use bit helper macros instead of bitops clk: ti: clkctrl: fix setting up clkctrl clocks * clk-allwinner: clk: sunxi-ng: h3: Export MBUS clock clk: sunxi-ng: h6: Allow GPU to change parent rate clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL * clk-qcom: clk: qcom: rpmh: Reuse sdm845 clks for sm8150 clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver clk: qcom: Allow constant ratio freq tables for rcg clk: qcom: smd: Add missing pnoc clock clk: qcom: Enumerate clocks and reset needed to boot the 8998 modem clk: qcom: clk-rpmh: Add support for RPMHCC for SC7180 dt-bindings: clock: Introduce RPMHCC bindings for SC7180 dt-bindings: clock: Add YAML schemas for the QCOM RPMHCC clock bindings clk: qcom: Add Global Clock controller (GCC) driver for SC7180 dt-bindings: clock: Add sc7180 GCC clock binding dt-bindings: clock: Add YAML schemas for the QCOM GCC clock bindings clk: qcom: common: Return NULL from clk_hw OF provider clk: qcom: rcg: update the DFS macro for RCG clk: qcom: remove unneeded semicolon clk: qcom: Add Q6SSTOP clock controller for QCS404 dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings * clk-sa: drivers/clk: convert VL struct to struct_size * clk-aspeed: clk: aspeed: Add RMII RCLK gates for both AST2500 MACs clk: ast2600: Add RMII RCLK gates for all four MACs dt-bindings: clock: Add AST2600 RMII RCLK gate definitions dt-bindings: clock: Add AST2500 RMII RCLK definitions
2019-11-27Merge branches 'clk-rohm', 'clk-hisilicon', 'clk-marvell', 'clk-unused' and ↵Stephen Boyd2-28/+4
'clk-devm-ioremap-resource' into clk-next - Prepare Armada 3700 for suspend to RAM by moving suspend/resume priority for PCIe - Drop unused variables, enums, etc. in various clk drivers - Convert various drivers to use devm_platform_ioremap_resource() * clk-rohm: clk: bd718x7: Add MODULE_ALIAS() * clk-hisilicon: clk: hisilicon: fix sparse warnings in clk-hi3660.c clk: hisilicon: fix sparse warnings in clk-hi3670.c * clk-marvell: dt-bindings: clk: armada3700: document the PCIe clock dt-bindings: clk: armada3700: fix typo in SoC name clk: mvebu: armada-37xx-periph: change suspend/resume time clk: mvebu: armada-37xx-periph: add PCIe gated clock * clk-unused: clk: armada-xp: remove unused code clk: imx: imx8mn: drop unused pll enum clk: ast2600: remove unused variable 'eclk_parent_names' * clk-devm-ioremap-resource: clk: sprd: Change to use devm_platform_ioremap_resource() clk: s3c2410: use devm_platform_ioremap_resource() to simplify code clk: axs10x: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt6797: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt7629: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt7622: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt8183: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt6779: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt2712: use devm_platform_ioremap_resource() to simplify code clk: davinci: use devm_platform_ioremap_resource() to simplify code clk: hisilicon: use devm_platform_ioremap_resource() to simplify code clk: bcm2835: use devm_platform_ioremap_resource() to simplify code
2019-11-14clk: armada-xp: remove unused codeYueHaibing1-26/+0
drivers/clk/mvebu/armada-xp.c:171:38: warning: mv98dx3236_coreclks defined but not used [-Wunused-const-variable=] drivers/clk/mvebu/armada-xp.c:213:41: warning: mv98dx3236_gating_desc defined but not used [-Wunused-const-variable=] They are not used since commit 337072604224 ("clk: mvebu: Expand mv98dx3236-core-clock support"). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20191111140420.36092-1-yuehaibing@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-08drivers/clk: convert VL struct to struct_sizeStephen Kitt2-4/+4
There are a few manually-calculated variable-length struct allocations left, this converts them to use struct_size. Found with the following git grep command git grep -A1 'kzalloc.*sizeof[^_].*+' Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lkml.kernel.org/r/20190927185110.29897-1-steve@sk2.org Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com> [sboyd@kernel.org: Add grep command] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-04clk: mvebu: armada-37xx-periph: change suspend/resume timeMiquel Raynal1-2/+2
Armada 3700 PCIe IP relies on the PCIe clock managed by this driver. For reasons related to the PCI core's organization when suspending/resuming, PCI host controller drivers must reconfigure their registers at suspend_noirq()/resume_noirq() which happens after suspend()/suspend_late() and before resume_early()/resume(). Device link support in the clock framework enforce that the clock driver's resume() callback will be called before the PCIe driver's. But, any resume_noirq() callback will be called before all the registered resume() callbacks. The solution to support PCIe resume operation is to change the "priority" of this clock driver PM callbacks to "_noirq()". Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190627125245.26788-3-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-04clk: mvebu: armada-37xx-periph: add PCIe gated clockMiquel Raynal1-0/+2
The PCIe clock is a gated clock which has the same source as GbE0 (both IPs share a set of registers). This source clock is called 'gbe_core' in the driver. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190627125245.26788-2-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18clk: mvebu: ap80x: add AP807 clock supportBen Peled1-0/+28
Add driver support for AP807 clock. Signed-off-by: Ben Peled <bpeled@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-9-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18clk: mvebu: ap806: Prepare the introduction of AP807 clock supportBen Peled1-63/+77
Factor out the code that is only useful to AP806 so it will be easier to support AP807. No functional changes. Signed-off-by: Ben Peled <bpeled@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-8-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driverOmri Itach1-2/+46
Add dynamic AP-DCLK clock (hclk) to system controller driver. AP-DCLK is half the rate of DDR clock, so its derrived from Sample At Reset configuration. The clock frequency is required for AP806 AXI monitor profiling feature. Signed-off-by: Omri Itach <omrii@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-7-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18clk: mvebu: ap806: be more explicit on what SaR isMiquel Raynal1-1/+1
"SaR" means Sample at Reset. DIP switches can be changed on the board, their states at reset time is available through a register read. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-6-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18clk: mvebu: ap80x-cpu: add AP807 CPU clock supportBen Peled1-2/+57
Enhance the ap-cpu-clk driver to support both AP806 and AP807 CPU clocks. Signed-off-by: Ben Peled <bpeled@marvell.com> [<miquel.raynal@bootlin.com>: use device data instead of conditions on the compatible] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-5-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clockChristine Gharzuzi1-20/+62
This patch allows same flow to be executed on chips with different register mappings like AP806 and, in the future, AP807. Note: this patch has no functional effect, and only prepares the driver for additional chips to be supported by retrieving the right device data depenging on the compatible property. Signed-off-by: Christine Gharzuzi <chrisg@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-4-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-08clk: mvebu: ap806: Fix clock name for the clusterGregory CLEMENT1-2/+2
Actually, the clocks exposed for the cluster are not the CPU clocks, but the PLL clock used as entry clock for the CPU clocks. The CPU clock will be managed by a driver submitting in the following patches. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lkml.kernel.org/r/20190710134346.30239-5-gregory.clement@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-08clk: mvebu: add CPU clock driver for Armada 7K/8KGregory CLEMENT3-0/+263
The CPU frequency is managed at the AP level for the Armada 7K/8K. The CPU frequency is modified by cluster: the CPUs of the same cluster have the same frequency. This patch adds the clock driver that will be used by CPUFreq, it is based on the work of Omri Itach <omrii@marvell.com>. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lkml.kernel.org/r/20190710134346.30239-4-gregory.clement@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-08clk: mvebu: add helper file for Armada AP and CP clocksGregory CLEMENT6-42/+61
Clock drivers for Armada AP and Armada CP use the same function to generate unique clock name. A third drivers is coming with the same need, so it's time to move this function in a common file. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lkml.kernel.org/r/20190710134346.30239-3-gregory.clement@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-06-26clk: kirkwood: Add support for MV98DX1135Chris Packham1-0/+17
The 98DX1135 is a switch chip with an integrated CPU. This is similar to the 98DX4122 except that the core clock speed is fixed to 166Mhz. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd3-0/+3
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-19clk: mvebu: fix spelling mistake "gatable" -> "gateable"Colin Ian King2-3/+3
There are a few spelling mistakes in comments and a pr_err error message. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-28clk: dove: fix refcount leak in dove_clk_init()Yangtao Li1-2/+6
The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Fixes: 8f7fc5450b64 ("clk: mvebu: dove: maintain clock init order") Fixes: 63b8d92c793f ("clk: add Dove PLL divider support for GPU, VMeta and AXI clocks") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-28clk: mv98dx3236: fix refcount leak in mv98dx3236_clk_init()Yangtao Li1-1/+3
The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Fixes: 337072604224 ("clk: mvebu: Expand mv98dx3236-core-clock support") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-28clk: armada-xp: fix refcount leak in axp_clk_init()Yangtao Li1-1/+3
The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Fixes: 0a11a6ae9437 ("clk: mvebu: armada-xp: maintain clock init order") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-28clk: kirkwood: fix refcount leak in kirkwood_clk_init()Yangtao Li1-0/+2
The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Fixes: 58d516ae95cb ("clk: mvebu: kirkwood: maintain clock init order") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-28clk: armada-370: fix refcount leak in a370_clk_init()Yangtao Li1-1/+3
The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Fixes: 07ad6836fa21 ("clk: mvebu: armada-370: maintain clock init order") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-03clk: mvebu: Off by one bugs in cp110_of_clk_get()Dan Carpenter1-2/+2
These > comparisons should be >= to prevent reading beyond the end of of the clk_data->hws[] buffer. The clk_data->hws[] array is allocated in cp110_syscon_common_probe() when we do: cp110_clk_data = devm_kzalloc(dev, sizeof(*cp110_clk_data) + sizeof(struct clk_hw *) * CP110_CLK_NUM, GFP_KERNEL); As you can see, it has CP110_CLK_NUM elements which is equivalent to CP110_MAX_CORE_CLOCKS + CP110_MAX_GATABLE_CLOCKS. Fixes: d3da3eaef7f4 ("clk: mvebu: new driver for Armada CP110 system controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-31Merge tag 'clk-for-linus' of ↵Linus Torvalds18-62/+69
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time it looks like a quieter release cycle in the clk tree. I guess that's because of summer time holidays/vacations. The biggest change in the diffstat is in the Qualcomm clk driver, where they got support for CPUs and handful of SoCs. After that, the at91 driver got a major rewrite for newer DT bindings that should make things easier going forward and the TI code moved to a clockdomain based design. The long tail is mostly small driver updates for newer clks and some simpler SoC clock drivers such as the Hisilicon and imx support. In the core framework, we only have two small changes this time. One is a new clk API to get all clks for a device with the bulk clk APIs. This allows drivers that don't care about doing anything besides turning on all the clks to just clk_get() them all and turn them on. The other change is the beginning of a way to support save and restore of clk settings in the clk framework. TI is the only user right now, but we will want to expand upon this design in the future to support more save and restore of clk registers. At least this gets us started and works well enough for one SoC, but there's more work in the future. Core: - clk_bulk_get_all() API and friends to get all the clks for a device - Basic clk state save/restore hooks New Drivers: - Renesas RZ/A2 (R7S9210) SoC, including early clocks - Rensas RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs - Rensas RZ/G2M (r8a774a1) SoC - Qualcomm Krait CPU clk support - Qualcomm QCS404 GCC support - Qualcomm SDM660 GCC support - Qualcomm SDM845 camera clock controller - Ingenic jz4725b CGU - Hisilicon 3670 SoC support - TI SCI clks on K3 SoCs - iMX6 MMDC clks - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs Updates: - Rework at91 PMC clock driver for new DT bindings - Nvidia Tegra clk driver MBIST workaround fix - S2RAM support for Marvell mvebu periph clks - Use updated printk format for OF node names - Fix TI code to only search DT subnodes - Various static analysis finds - Tag various drivers with SPDX license tags - Support dynamic frequency switching (DFS) on qcom SDM845 GCC - Only use s2mps11 dt-binding defines instead of redefining them in the driver - Add some more missing clks to qcom MSM8996 GCC - Quad SPI clks on qcom SDM845 - Add support for CMT timer clocks on R-Car V3H - Add support for SHDI and various timer clocks on R-Car V3M - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs - Amlogic clk-pll driver improvements and updates - Amlogic axg audio controller system clocks - Register Amlogic meson8b clock controller early - Add support for SATA and Fine Display Processor (FDP) clocks on R-Car M3-N - Consolidation of system suspend related code in Exynos, S5P, S3C SoC clk drivers - Fixes for system suspend support on Exynos542x (Odroid boards) and Exynos5433 SoC - Remove obsoleted Exynos4212 ISP clock definitions - Migrated TI am3/4/5 and dra7 SoCs to clockdomain based design - TI RTC+DDR sleep mode support for clock save/restore - Allwinner A64 display engine support and fixes - Allwinner A83t display engine support and fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (186 commits) clk: qcom: Remove unused arrays in SDM845 GCC clk: fixed-rate: fix of_node_get-put imbalance clk: s2mps11: Add used attribute to s2mps11_dt_match clk: qcom: gcc-sdm660: Add MODULE_LICENSE clk: qcom: Add safe switch hook for krait mux clocks dt-bindings: clock: Document qcom,krait-cc clk: qcom: Add Krait clock controller driver dt-bindings: arm: Document qcom,kpss-gcc clk: qcom: Add KPSS ACC/GCC driver clk: qcom: Add support for Krait clocks clk: qcom: Add IPQ806X's HFPLLs clk: qcom: Add MSM8960/APQ8064's HFPLLs dt-bindings: clock: Document qcom,hfpll clk: qcom: Add HFPLL driver clk: qcom: Add support for High-Frequency PLLs (HFPLLs) ARM: Add Krait L2 register accessor functions clk: imx6q: add mmdc0 ipg clock clk: imx6sl: add mmdc ipg clocks clk: imx6sll: add mmdc1 ipg clock clk: imx6sx: add mmdc1 ipg clock ...
2018-10-19Merge branches 'clk-mvebu-periph-pm', 'clk-meson', 'clk-allwinner', ↵Stephen Boyd2-9/+50
'clk-mvebu-dup' and 'clk-davinci' into clk-next - S2RAM support for Marvell mvebu periph clks * clk-mvebu-periph-pm: clk: mvebu: armada-37xx-periph: add suspend/resume support clk: mvebu: armada-37xx-periph: save the IP base address in the driver data * clk-meson: clk: meson: meson8b: use the regmap in the internal reset controller clk: meson: meson8b: register the clock controller early clk: meson-axg: pcie: drop the mpll3 clock parent clk: meson: axg: round audio system master clocks down clk: meson: clk-pll: drop hard-coded rates from pll tables clk: meson: clk-pll: remove od parameters clk: meson: clk-pll: drop CLK_GET_RATE_NOCACHE where unnecessary clk: meson: clk-pll: add enable bit * clk-allwinner: dt-bindings: clock: sun50i-a64-ccu: Add PLL_VIDEO0 macro clk: sunxi-ng: a64: Add max. rate constraint to video PLLs clk: sunxi-ng: a64: Add minimal rate for video PLLs clk: sunxi-ng: sun50i: h6: Add 2x fixed post-divider to MMC module clocks clk: sunxi-ng: a83t: Add max. rate constraint to video PLLs clk: sunxi-ng: nkmp: Add constraint for maximum rate clk: sunxi-ng: r40: Add max. rate constraint to video PLLs clk: sunxi-ng: h3/h5: Add max. rate constraint to pll-video clk: sunxi-ng: Add maximum rate constraint to NM PLLs clk: sunxi-ng: h6: fix PWM gate/reset offset clk: sunxi-ng: h6: fix bus clocks' divider position * clk-mvebu-dup: clk: mvebu: ap806: Remove superfluous of_clk_add_provider * clk-davinci: clk: davinci: kill davinci_clk_reset_assert/deassert()
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-18 07:20:49 +0300