summaryrefslogtreecommitdiff
path: root/drivers/clk/mmp
AgeCommit message (Collapse)AuthorFilesLines
2023-12-17clk: mmp: pxa168: Fix memory leak in pxa168_clk_init()Kuan-Wei Chiu1-0/+3
In cases where mapping of mpmu/apmu/apbc registers fails, the code path does not handle the failure gracefully, potentially leading to a memory leak. This fix ensures proper cleanup by freeing the allocated memory for 'pxa_unit' before returning. Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Link: https://lore.kernel.org/r/20231210175232.3414584-1-visitorckw@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-23clk: pxa910: Move number of clocks to driver sourceDuje Mihanović1-1/+3
The number of clocks should not be in the dt binding as it is not used by the respective device tree and thus needlessly bloats the ABI. Move this number of clocks into the driver source. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-4-f9271bd7eaa5@skole.hr Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-23clk: pxa1928: Move number of clocks to driver sourceDuje Mihanović1-2/+5
The number of clocks should not be in the dt binding as it is not used by the respective device tree and thus needlessly bloats the ABI. Move this number of clocks into the driver source. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-3-f9271bd7eaa5@skole.hr Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-23clk: pxa168: Move number of clocks to driver sourceDuje Mihanović1-1/+3
The number of clocks should not be in the dt binding as it is not used by the respective device tree and thus needlessly bloats the ABI. Move this number of clocks into the driver source. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-2-f9271bd7eaa5@skole.hr Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-23clk: mmp2: Move number of clocks to driver sourceDuje Mihanović2-3/+7
The number of clocks should not be in the dt binding as it is not used by the respective device tree and thus needlessly bloats the ABI. Move this number of clocks into the driver source. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-1-f9271bd7eaa5@skole.hr Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-23clk: mmp: Remove old non-OF clock driversDuje Mihanović4-1137/+0
There are no MMP2, PXA168 or PXA910 boards still using board files which would use these drivers, so remove them. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20230804-drop-old-mmp-clk-v1-1-0c07db6cee90@skole.hr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-03-29clk: mmp: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230312161512.2715500-21-u.kleine-koenig@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: control shared SDH bits with separate clockDoug Brown1-4/+7
The PXA168 has a peculiar setup with the AXI clock enable control for the SDHC controllers. The bits in the SDH0 register control the AXI clock enable for both SDH0 and SDH1. Likewise, the bits in the SDH2 register control both SDH2 and SDH3. This is modeled with two new parentless clocks that control the shared bits. Previously, SDH0 had to be enabled in order for SDH1 to be used, and when SDH1 was enabled, unused bits in the SDH1 register were being controlled. This fixes those issues. A future commit will add support for these new shared clocks to be enabled by the PXA168 SDHC driver. Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-13-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: add clocks for SDH2 and SDH3Doug Brown1-0/+6
The PXA168 has four SDHC peripherals. This commit adds the last two. Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-11-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: fix GPIO clock enable bitsDoug Brown1-1/+1
According to the datasheet, only bit 0 of APBC_GPIO should be controlled for the clock enable. Bit 1 is marked as reserved (always write 0). Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-9-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: add muxes for more peripheralsDoug Brown1-10/+32
The TWSI, KPC, PWM, and DFC peripherals didn't have their muxes modeled in the code, but the PXA168 datasheet shows that they are indeed muxed: - TWSI can be 31.2 MHz or 62.4 MHz - KPC can be 32 kHz, 16 kHz, or 26 MHz - PWM can be 13 MHz or 32 kHz - DFC can be 156 MHz or 78 MHz Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-8-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: fix incorrect parent clocksDoug Brown1-6/+6
The UART, SDHC, LCD, and CCIC peripherals' muxed parent clocks didn't match the information provided by the PXA168 datasheet: - The UART clocks can be 58.5 MHz or the UART PLL. Previously, the first mux option was being calculated as 117 MHz, confirmed on hardware to be incorrect. - The SDHC clocks can be 48 MHz, 52 MHz, or 78 MHz. Previously, 48 MHz and 52 MHz were swapped. 78 MHz wasn't listed as an option. - The LCD clock can be 624 MHz or 312 Mhz. Previously, it was being calculated as 312 MHz or 52 MHz. - The CCIC clock can be 156 MHz or 78 MHz. Previously, it was being calculated as 312 MHz or 52 MHz. Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-7-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: fix const-correctnessDoug Brown1-7/+7
While working on this series of patches, checkpatch recommended that an extra const should be added to the mux parent arrays. Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-6-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: add new clocks for peripheralsDoug Brown1-0/+3
This commit adds three new clocks that previously didn't exist, but are needed in order to match the clock parenting as described in the PXA168 datasheet. Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-5-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: fix incorrect dividersDoug Brown1-2/+2
These two clocks had multipliers and dividers that didn't match their names. A subsequent commit goes through all of the existing peripherals and ensure the correct clocks are being used everywhere. Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-3-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: mmp: pxa168: add additional register definesDoug Brown1-7/+24
In preparation for adding additional peripherals over time, this commit adds a bunch of extra APBC_* defines based on information from the datasheet. It also reorganizes the list of defines to be ordered sequentially by address (grouped by type). Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20220612192937.162952-2-doug@schmorgal.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE ↵Thomas Gleixner12-48/+12
(part 2) Based on the normalized pattern: this file is licensed under the terms of the gnu general public license version 2 this program is licensed as is without any warranty of any kind whether express or implied extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-29Merge branches 'clk-starfive', 'clk-ti', 'clk-terminate' and 'clk-cleanup' ↵Stephen Boyd1-1/+1
into clk-next - Audio clks on StarFive JH7100 RISC-V SoC - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments * clk-starfive: clk: starfive: Add JH7100 audio clock driver clk: starfive: jh7100: Support more clock types clk: starfive: jh7100: Make hw clock implementation reusable dt-bindings: clock: Add starfive,jh7100-audclk bindings dt-bindings: clock: Add JH7100 audio clock definitions clk: starfive: jh7100: Handle audio_div clock properly clk: starfive: jh7100: Don't round divisor up twice * clk-ti: clk: ti: Drop legacy compatibility clocks for dra7 clk: ti: Drop legacy compatibility clocks for am4 clk: ti: Drop legacy compatibility clocks for am3 clk: ti: Update component clocks to use ti_dt_clk_name() clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name() clk: ti: Add ti_dt_clk_name() helper to use clock-output-names clk: ti: Use clock-output-names for clkctrl clk: ti: Add ti_find_clock_provider() to use clock-output-names clk: ti: Optionally parse IO address from parent clock node clk: ti: Preserve node in ti_dt_clocks_register() clk: ti: Constify clkctrl_name * clk-terminate: clk: actions: Make sentinel elements more obvious clk: clps711x: Terminate clk_div_table with sentinel element clk: hisilicon: Terminate clk_div_table with sentinel element clk: loongson1: Terminate clk_div_table with sentinel element clk: actions: Terminate clk_div_table with sentinel element * clk-cleanup: clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments clk: COMMON_CLK_LAN966X should depend on SOC_LAN966 clk: Use of_device_get_match_data() clk: bcm2835: Remove unused variable clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver clk: cleanup comments clk: socfpga: cleanup spdx tags
2022-03-12clk: cleanup commentsTom Rix1-1/+1
For spdx Space instead of tab before spdx tag Removed repeated works the, to, two Replacements much much to a much 'to to' to 'to do' aready to already Comunications to Communications freqency to frequency Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220222195153.3817625-1-trix@redhat.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-26clk: mmp: Declare mux tables as const u32[]Jonathan Neuschäfer1-2/+2
Now that clk_register_mux_table takes a const u32 *, we can declare the mux tables as const u32[]. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20220205103613.1216218-6-j.neuschaefer@gmx.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-01-12clk: mmp2: fix build without CONFIG_PMArnd Bergmann1-2/+4
pm_clk_suspend()/pm_clk_resume() are defined as NULL pointers rather than empty inline stubs without CONFIG_PM: drivers/clk/mmp/clk-audio.c:402:16: error: called object type 'void *' is not a function or function pointer pm_clk_suspend(dev); drivers/clk/mmp/clk-audio.c:411:15: error: called object type 'void *' is not a function or function pointer pm_clk_resume(dev); I tried redefining the helper functions, but that caused additional problems. This is the simple solution of replacing the __maybe_unused trick with an #ifdef. Fixes: 725262d29139 ("clk: mmp2: Add audio clock controller driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210103135503.3668784-1-arnd@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-20Merge branches 'clk-semicolon', 'clk-axi-clkgen', 'clk-qoriq', 'clk-baikal', ↵Stephen Boyd1-2/+2
'clk-const' and 'clk-mmp2' into clk-next * clk-semicolon: clk: meson: use semicolons rather than commas to separate statements clk: mvebu: ap80x-cpu: use semicolons rather than commas to separate statements clk: uniphier: use semicolons rather than commas to separate statements * clk-axi-clkgen: clk: axi-clkgen: Set power bits for fractional mode clk: axi-clkgen: Add support for fractional dividers * clk-qoriq: clk: qoriq: modify MAX_PLL_DIV to 32 * clk-baikal: clk: baikal-t1: Mark Ethernet PLL as critical * clk-const: clk: pxa: Constify static struct clk_ops * clk-mmp2: clk: mmp2: Fix the display clock divider base
2020-10-14clk: mmp2: Fix the display clock divider baseLubomir Rintel1-2/+2
The LCD clock dividers are apparently based on one. No datasheet, determined empirically, but seems to be confirmed by line 19 of lcd.fth in OLPC laptop's Open Firmware [1]: h# 00000700 value pmua-disp-clk-sel \ PLL1 / 7 -> 113.86 MHz [1] https://raw.githubusercontent.com/quozl/openfirmware/65a08a73b2cac/cpu/arm/olpc/lcd.fth Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200925233914.227786-1-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: mmp: pxa1928: drop unused 'clk' variableKrzysztof Kozlowski1-2/+1
'clk' is assigned but never read: drivers/clk/mmp/clk-of-pxa1928.c: In function ‘pxa1928_pll_init’: drivers/clk/mmp/clk-of-pxa1928.c:71:14: warning: variable ‘clk’ set but not used [-Wunused-but-set-variable] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200916161740.14173-4-krzk@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-29clk: mmp: avoid missing prototype warningArnd Bergmann2-0/+2
The kernel test robot points out two harmless warnings in the mmp clk drivers: drivers/clk/mmp/clk-pxa168.c:68:13: warning: no previous prototype for 'pxa168_clk_init' [-Wmissing-prototypes] drivers/clk/mmp/clk-pxa910.c:66:13: warning: no previous prototype for 'pxa910_clk_init' [-Wmissing-prototypes] Fix these by including corresponding header file. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200729113456.4072290-1-arnd@arndb.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds6-15/+688
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-05-28clk: mmp2: Add audio clock controller driverLubomir Rintel2-0/+444
This is a driver for a block that generates master and bit clocks for the I2S interface. It's separate from the PMUs that generate clocks for the peripherals. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200519224151.2074597-14-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-28clk: mmp2: Add support for power islandsLubomir Rintel4-1/+168
Apart from the clocks and resets, the PMU hardware also controls power to peripherals that are on separate power islands. On MMP2, that's the GC860 GPU and the SSPA audio interface, while on MMP3 also the camera interface is on a separate island, along with the pair of GC2000 and GC300 GPUs and the SSPA. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200519224151.2074597-12-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-28clk: mmp2: Add the audio clockLubomir Rintel1-0/+4
This clocks the Audio block. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200519224151.2074597-9-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-28clk: mmp2: Add the I2S clocksLubomir Rintel1-0/+46
A pair of fractional clock sources for PLLs and gates. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200519224151.2074597-8-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-28clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init()Lubomir Rintel1-2/+2
This is a trivial rename for a routine that registers more clock sources than the PLLs -- there's also a XO. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200519224151.2074597-7-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-28clk: mmp2: Move thermal register defines up a bitLubomir Rintel1-4/+4
A trivial change to keep the sorting sane. The APBC registers are happier when they are grouped together, instead of mixed with the APMU ones. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200519224151.2074597-6-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-28clk: mmp: frac: Allow setting bits other than the numerator/denominatorLubomir Rintel2-0/+4
For the I2S fractional clocks, there are more bits that need to be set for the clock to run. Their actual meaning is unknown. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200519224151.2074597-3-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-28clk: mmp: frac: Do not lose last 4 digits of precisionLubomir Rintel1-8/+16
While calculating the output rate of a fractional divider clock, the value is divided and multipled by 10000, discarding the least significant digits -- presumably to fit the intermediate value within 32 bits. The precision we're losing is, however, not insignificant for things like I2S clock. Maybe also elsewhere, now that since commit ea56ad60260e ("clk: mmp2: Stop pretending PLL outputs are constant") the parent rates are more precise and no longer rounded to 10000s. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200519224151.2074597-2-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-04-13clk: mmp2: fix link error without mmp2Arnd Bergmann3-39/+32
The newly added function is only built into the kernel if mmp2 is enabled, causing a link error otherwise. arm-linux-gnueabi-ld: drivers/clk/mmp/clk.o: in function `mmp_register_pll_clks': clk.c:(.text+0x6dc): undefined reference to `mmp_clk_register_pll' Move it to a different file to get it to link. Fixes: 5d34d0b32d6c ("clk: mmp2: Add support for PLL clock sources") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20200408160518.2798571-1-arnd@arndb.de Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21clk: mmp2: Fix bit masks for LCDC I/O and pixel clocksLubomir Rintel1-2/+2
They were reversed because I read the datasheet upside down. Actually there is no datasheet, but I ended up understanding the comments in Open Firmware driver wrong. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-18-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21clk: mmp2: Add clock for fifth SD HCI on MMP3Lubomir Rintel1-0/+2
There's one extra SDHCI on MMP3, used by the internal SD card on OLPC XO-4. Add a clock for it. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-17-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21clk: mmp2: Add clocks for the thermal sensorsLubomir Rintel1-0/+16
The register definitions gotten from OLPC Open Firmware. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-15-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21clk: mmp2: add the GPU clocksLubomir Rintel1-0/+61
MMP2 has a single GC860 core while MMP3 has a GC2000 and a GC300. On both platforms there's an AXI bus interface clock that's common for all GPUs and each GPU core has a separate clock. Meaning of the relevant APMU_GPU bits were gotten from James Cameron's message and [1], the OLPC OS kernel source [2] and Marvell's MMP3 tree. [1] http://lists.laptop.org/pipermail/devel/2019-April/039053.html [2] http://dev.laptop.org/git/olpc-kernel/commit/arch/arm/mach-mmp/mmp2.c?h=arm-3.0-wip&id=8ce9f6122 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-13-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21clk: mmp2: Add PLLs that are available on MMP3Lubomir Rintel1-7/+27
There are more PLLs on MMP3 and are configured slightly differently. Tested on a MMP3-based Dell Wyse 3020 machine. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-10-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21clk: mmp2: Check for MMP3Lubomir Rintel1-0/+12
The MMP3's are similar enough to MMP2, but there are differencies, such are more clocks available on the newer model. We want to tell which platform are we on. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-8-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21clk: mmp2: Stop pretending PLL outputs are constantLubomir Rintel1-2/+14
The hardcoded values for PLL1 and PLL2 are wrong. PLL1 is slightly off -- it defaults to 797.33 MHz, not 800 MHz. PLL2 is disabled by default, but also configurable. Tested on a MMP2-based OLPC XO-1.75 laptop, with PLL1=797.33 and various values of PLL2 set via set-pll2-520mhz, set-pll2-910mhz and set-pll2-988mhz Open Firmware words. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-6-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21clk: mmp2: Add support for PLL clock sourcesLubomir Rintel4-1/+195
The clk-of-mmp2 driver pretends that the clock outputs from the PLLs are constant, but in fact they are configurable. Add logic for obtaining the actual clock rates on MMP2 as well as MMP3. There is no documentation for either SoC, but the "systemsetting" drivers from Marvell GPL code dump provide some clue as far as MPMU registers on MMP2 [1] and MMP3 [2] go. [1] https://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp3-dell-ariel.git/tree/drivers/char/mmp2_systemsetting.c [2] https://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp3-dell-ariel.git/tree/drivers/char/mmp3_systemsetting.c A separate commit will adjust the clk-of-mmp2 driver. Tested on a MMP3-based Dell Wyse 3020 as well as MMP2-based OLPC XO-1.75 laptop. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-5-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21clk: mmp2: Constify some stringsLubomir Rintel3-9/+10
All the parent clock names for the muxes are constant. Add const. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-3-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-21clk: mmp2: Remove a unused prototypeLubomir Rintel1-3/+0
There is no mmp_clk_register_pll2() routine. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-2-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-09Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+6
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-02-04Merge tag 'clk-for-linus' of ↵Linus Torvalds2-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There are a few changes to the core framework this time around, in addition to the normal collection of driver updates to support new SoCs, fix incorrect data, and convert various drivers to clk_hw based APIs. In the core, we allow clk_ops::init() to return an error code now so that we can fail clk registration if the callback does something like fail to allocate memory. We also add a new "terminate" clk_op so that things done in clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now when critical clks fail to enable and we support changing clk rates and enable/disable state through debugfs when developers compile the kernel themselves. On the driver front, we get support for what seems like a lot of Qualcomm and NXP SoCs given that those vendors dominate the diffstat. There are a couple new drivers for Xilinx and Amlogic SoCs too. The updates are all small things like fixing the way glitch free muxes switch parents, avoiding div-by-zero problems, or fixing data like parent names. See the updates section below for more details. Finally, the "basic" clk types have been converted to support specifying parents with clk_hw pointers. This work includes an overhaul of the fixed-rate clk type to be more modern by using clk_hw APIs. Core: - Let clk_ops::init() return an error code - Add a clk_ops::terminate() callback to undo clk_ops::init() - Warn about critical clks that fail to enable or prepare - Support dangerous debugfs actions on clks with dead code New Drivers: - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Add a driver for BCLK of Freescale SAI cores - Add cam, vpe and sgx clock support for TI dra7 - Add aess clock support for TI omap5 - Enable clks for CPUfreq on Allwinner A64 SoCs - Add Amlogic meson8b DDR clock controller - Add input clocks to Amlogic meson8b controllers - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2 - i.MX8MP clk driver support Updates: - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs - Detect more PRMCU variants in ux500 driver - Adjust the composite clk type to new way of describing clk parents - Fixes for clk controllers on qcom msm8998 SoCs - Fix gmac main clock for TI dra7 - Move TI dra7-atl clock header to correct location - Fix hidden node name dependency on TI clkctrl clocks - Fix Amlogic meson8b mali clock update using the glitch free mux - Fix Amlogic pll driver division by zero at init - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols - Switch more i.MX clk drivers to clk_hw based APIs - Disable non-functional divider between pll4_audio_div and pll4_post_div on imx6q - Fix watchdog2 clock name typo in imx7ulp clock driver - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs - Suppress bind attrs for i.MX8M clock driver - Add a big comment in imx8qxp-lpcg driver to tell why devm_platform_ioremap_resource() shouldn't be used for the driver - A correction on i.MX8MN usb1_ctrl parent clock setting" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits) dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id clk: ls1028a: Fix warning on clamp() usage clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock ...
2020-01-06clk: mmp2: Add HSIC clocksLubomir Rintel1-0/+6
There are two USB HSIC controllers on MMP2 and MMP3. Link: https://lore.kernel.org/r/20191220065314.237624-3-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-06clk: mmp2: Fix the order of timer mux parentsLubomir Rintel1-1/+1
Determined empirically, no documentation is available. The OLPC XO-1.75 laptop used parent 1, that one being VCTCXO/4 (65MHz), but thought it's a VCTCXO/2 (130MHz). The mmp2 timer driver, not knowing what is going on, ended up just dividing the rate as of commit f36797ee4380 ("ARM: mmp/mmp2: dt: enable the clock")' Link: https://lore.kernel.org/r/20191218190454.420358-3-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-24clk: let init callback return an error codeJerome Brunet2-2/+6
If the init callback is allowed to request resources, it needs a return value to report the outcome of such a request. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190924123954.31561-3-jbrunet@baylibre.com Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 07:54:03 +0300