summaryrefslogtreecommitdiff
path: root/drivers/clk/microchip
AgeCommit message (Collapse)AuthorFilesLines
2022-12-09clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIREConor Dooley1-1/+2
With the intent of removing driver selects from Kconfig.socs in arch/riscv, essential drivers that were being selected there could instead by enabled by defaulting them to the value of the SoC's Kconfig symbol. Do so here & drop the depend on RISC-V - the SOC_ symbols are only defined there anyway. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221123161921.81195-1-conor@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-24clk: microchip: check for null return of devm_kzalloc()Hui Tang1-0/+6
Because of the possible failure of devm_kzalloc(), name might be NULL and will cause null pointer dereference later. Therefore, it might be better to check it and directly return -ENOMEM. Fixes: d39fb172760e ("clk: microchip: add PolarFire SoC fabric clock support") Signed-off-by: Hui Tang <tanghui20@huawei.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> [claudiu.beznea: s/refrence/reference/, s/possilble/possible] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221119054858.178629-1-tanghui20@huawei.com
2022-09-14clk: microchip: add PolarFire SoC fabric clock supportConor Dooley2-0/+291
Add a driver to support the PLLs in PolarFire SoC's Clock Conditioning Circuitry, an instance of which is located in each ordinal corner of the FPGA. Only get_rate() is supported as these clocks are intended to be statically configured by the FPGA design. Currently, the DLLs are not supported by this driver. For more information on the hardware, see "PolarFire SoC FPGA Clocking Resources" in the link below. Link: https://onlinedocs.microchip.com/pr/GUID-8F0CC4C0-0317-4262-89CA-CE7773ED1931-en-US-1/index.html Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220908143651.1252601-5-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: update module authorship & licencingConor Dooley1-3/+7
Padmarao wrote the driver in its original, pre upstream form. Daire & myself have been responsible for getting it upstreamable and subsequent development. Move Daire out of the blurb & into a MODULE_AUTHOR entry & add entries for myself and Padmarao. While we are at it, convert the MODULE_LICENSE field to its preferred form of "GPL". Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-15-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: convert periph_clk to clk_gateConor Dooley1-66/+6
With the reset code moved to the recently added reset controller, there is no need for custom ops any longer. Remove the custom ops and the custom struct by converting to a clk_gate. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-14-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: convert cfg_clk to clk_dividerConor Dooley1-68/+8
The cfg_clk struct is now just a redefinition of the clk_divider struct with custom implentations of the ops, that implement an extra level of redirection. Remove the custom struct and replace it with clk_divider. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-13-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: delete 2 line mpfs_clk_register_foo()Conor Dooley1-27/+6
The register functions are now comprised of only a single operation each and no longer add anything to the driver. Delete them. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-12-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: simplify control reg accessConor Dooley1-25/+17
The control reg addresses are known when the clocks are registered, so we can, instead of assigning a base pointer to the structs, assign the control reg addresses directly. Accordingly, remove the interim variables used during reads/writes to those registers. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-11-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: move id & offset out of clock structsConor Dooley1-15/+15
The id and offset are the only thing differentiating the clock structs from "regular" clock structures. On the pretext of converting to more normal structures, move the id and offset out of the clock structs and into the hw structs instead. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-10-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: add MSS pll's set & round rateConor Dooley1-0/+54
The MSS pll is not a fixed frequency clock, so add set() & round_rate() support. Control is limited to a 7 bit output divider as other devices on the FPGA occupy the other three outputs of the PLL & prevent changing the multiplier. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-9-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: add reset controllerConor Dooley2-12/+99
Add a reset controller to PolarFire SoC's clock driver. This reset controller is registered as an aux device and read/write functions exported to the drivers namespace so that the reset controller can access the peripheral device reset register. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-5-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: make the rtc's ahb clock criticalConor Dooley1-1/+3
The onboard RTC's AHB bus clock must be kept running as the RTC will stop & lose track of time if the AHB interface clock is disabled. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-3-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: fix clk_cfg array bounds violationConor Dooley1-1/+6
There is an array bounds violation present during clock registration, triggered by current code by only specific toolchains. This seems to fail gracefully in v6.0-rc1, using a toolchain build from the riscv- gnu-toolchain repo and with clang-15, and life carries on. While converting the driver to use standard clock structs/ops, kernel panics were seen during boot when built with clang-15: [ 0.581754] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b1 [ 0.591520] Oops [#1] [ 0.594045] Modules linked in: [ 0.597435] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc1-00011-g8e1459cf4eca #1 [ 0.606188] Hardware name: Microchip PolarFire-SoC Icicle Kit (DT) [ 0.613012] epc : __clk_register+0x4a6/0x85c [ 0.617759] ra : __clk_register+0x49e/0x85c [ 0.622489] epc : ffffffff803faf7c ra : ffffffff803faf74 sp : ffffffc80400b720 [ 0.630466] gp : ffffffff810e93f8 tp : ffffffe77fe60000 t0 : ffffffe77ffb3800 [ 0.638443] t1 : 000000000000000a t2 : ffffffffffffffff s0 : ffffffc80400b7c0 [ 0.646420] s1 : 0000000000000001 a0 : 0000000000000001 a1 : 0000000000000000 [ 0.654396] a2 : 0000000000000001 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.662373] a5 : ffffffff803a5810 a6 : 0000000200000022 a7 : 0000000000000006 [ 0.670350] s2 : ffffffff81099d48 s3 : ffffffff80d6e28e s4 : 0000000000000028 [ 0.678327] s5 : ffffffff810ed3c8 s6 : ffffffff810ed3d0 s7 : ffffffe77ffbc100 [ 0.686304] s8 : ffffffe77ffb1540 s9 : ffffffe77ffb1540 s10: 0000000000000008 [ 0.694281] s11: 0000000000000000 t3 : 00000000000000c6 t4 : 0000000000000007 [ 0.702258] t5 : ffffffff810c78c0 t6 : ffffffe77ff88cd0 [ 0.708125] status: 0000000200000120 badaddr: 00000000000000b1 cause: 000000000000000d [ 0.716869] [<ffffffff803fb892>] devm_clk_hw_register+0x62/0xaa [ 0.723420] [<ffffffff80403412>] mpfs_clk_probe+0x1e0/0x244 In v6.0-rc1 and later, this issue is visible without the follow on patches doing the conversion using toolchains provided by our Yocto meta layer too. It fails on "clk_periph_timer" - which uses a different parent, that it tries to find using the macro: \#define PARENT_CLK(PARENT) (&mpfs_cfg_clks[CLK_##PARENT].cfg.hw) If parent is RTCREF, so the macro becomes: &mpfs_cfg_clks[33].cfg.hw which is well beyond the end of the array. Amazingly, builds with GCC 11.1 see no problem here, booting correctly and hooking the parent up etc. Builds with clang-15 do not, with the above panic. Change the macro to use specific offsets depending on the parent rather than the dt-binding's clock IDs. Fixes: 1c6a7ea32b8c ("clk: microchip: mpfs: add RTCREF clock control") CC: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-2-conor.dooley@microchip.com
2022-04-23clk: microchip: mpfs: add RTCREF clock controlConor Dooley1-1/+23
The reference clock used by the PolarFire SoC's onboard rtc was missing from the clock driver. Add this clock at the "config" clock level, with the external reference clock as its parent. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220413075835.3354193-9-conor.dooley@microchip.com Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-23clk: microchip: mpfs: re-parent the configurable clocksConor Dooley1-19/+132
Currently the mpfs clock driver uses a reference clock called the "msspll", set in the device tree, as the parent for the cpu/axi/ahb (config) clocks. The frequency of the msspll is determined by the FPGA bitstream & the bootloader configures the clock to match the bitstream. The real reference is provided by a 100 or 125 MHz off chip oscillator. However, the msspll clock is not actually the parent of all clocks on the system - the reference clock for the rtc/mtimer actually has the off chip oscillator as its parent. In order to fix this, add support for reading the configuration of the msspll & reparent the "config" clocks so that they are derived from this clock rather than the reference in the device tree. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220413075835.3354193-8-conor.dooley@microchip.com Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-23clk: microchip: mpfs: mark CLK_ATHENA as criticalConor Dooley1-3/+5
CLK_ATHENA is another fabric interconnect and should be marked as critical as with FIC0-3, since disabling it will cause part of the fabric to go into reset. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220413075835.3354193-3-conor.dooley@microchip.com Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-23clk: microchip: mpfs: fix parents for FIC clocksConor Dooley1-5/+5
The fabric interconnects are on the AXI bus not AHB. Update their parent clocks to fix this. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220413075835.3354193-2-conor.dooley@microchip.com Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-22clk: microchip: mpfs: don't reset disabled peripheralsConor Dooley1-4/+0
The current clock driver for PolarFire SoC puts the hardware behind "periph" clocks into reset if their clock is disabled. CONFIG_PM was recently added to the riscv defconfig and exposed issues caused by this behaviour, where the Cadence GEM was being put into reset between its bringup & the PHY bringup: https://lore.kernel.org/linux-riscv/9f4b057d-1985-5fd3-65c0-f944161c7792@microchip.com/ Fix this (for now) by removing the reset from mpfs_periph_clk_disable. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220411072340.740981-1-conor.dooley@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-12clk: microchip: Add driver for Microchip PolarFire SoCDaire McNamara3-0/+392
Add support for clock configuration on Microchip PolarFire SoC Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Co-developed-by: Padmarao Begari <padmarao.begari@microchip.com> Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Co-developed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220222121143.3316880-2-conor.dooley@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-24clk: let init callback return an error codeJerome Brunet1-2/+6
If the init callback is allowed to request resources, it needs a return value to report the outcome of such a request. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190924123954.31561-3-jbrunet@baylibre.com Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445Thomas Gleixner3-27/+3
Based on 1 normalized pattern(s): this program is free software you can distribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 24 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.872212424@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd2-0/+2
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2016-08-25clk: microchip: Initialize SOSC clock rate for PIC32MZDA.Purna Chandra Mandal1-0/+1
Optional SOSC is an external fixed clock running at 32768HZ. So Initialize SOSC rate as per PIC32MZDA datasheet. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-25clk: microchip: use readl_poll_timeout() in pbclk_set_rate().Purna Chandra Mandal1-3/+3
pbclk_set_rate() is using readl_poll_timeout_atomic() even though spinlock is released. Fix it by replacing with readl_poll_timeout(). Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-02clk: microchip: Remove CLK_IS_ROOTStephen Boyd1-5/+5
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Cc: Purna Chandra Mandal <purna.mandal@microchip.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: <linux-mips@linux-mips.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-05-13CLK: microchip: Add Microchip PIC32 clock driver.Purna Chandra Mandal4-0/+1392
This clock driver implements PIC32 specific clock-tree. clock-tree entities can only be configured through device-tree file (OF). Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-clk@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13247/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 12:56:50 +0300