summaryrefslogtreecommitdiff
path: root/drivers/clk/imx
AgeCommit message (Collapse)AuthorFilesLines
2016-07-13clk: imx7d: do not set parent of ethernet time/ref clocksStefan Agner1-9/+0
All device trees currently in mainline specify the time clock parent using the assigned-clocks/assigned-clock-parents method, there is no need to statically assign the parent in the core clock driver. Also all current boards provide an Ethernet reference clock for the PHY externally, hence configuring the internal PHY reference clock. Furthermore, and the actual driver of this patch, specify ethernet related parents at that early point in boot leads to a warning: bad: scheduling from the idle thread! The reason for the warning is that setting the parent enables the ENET PLL since we are using CLK_OPS_PARENT_ENABLE. Enabling the ENET PLL can cause clk_pllv3_wait_lock to sleep. See also: commit fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)"). Note that setting the ENET AXI root clock parent also requires ENET PLL to be enabled. However, U-Boot typically leaves the ENET PLL on, hence when the framework sets the parent of the first clock, it does not need to wait for the PLL to come up. But because there is currently no user of that clock, the PLL gets disabled after setting the parent. Therefore, subsequent reparenting calls of any clock which somehow rely on the ENET PLL, need to reenable the ENET PLL which leads to a sleep. Removing those subsequent reparenting calls works around this issue. Also remove comments. The code is really verbose enough. Signed-off-by: Stefan Agner <stefan@agner.ch> Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160703174813.13970-1-stefan@agner.ch
2016-07-08clk: imx: vf610: Disable automatic clock gating for lpuart in LPSTOP modeStefan Agner1-6/+6
In order to allow wake support in STOP sleep mode, clocks are needed. Use imx_clk_gate2_cgr to disable automatic clock gating in low power mode STOP. This allows to enable wake by UART using: echo enabled > /sys/class/tty/ttyLP0/power/wakeup However, if wake is not enabled, the driver should disable the clocks explicitly to save power. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160628053235.5114-3-bhuvanchandra.dv@toradex.com
2016-07-02clk: imx7d: only enable minimum required clocksDong Aisheng1-8/+10
Formerly clk core does not support imx7d clock type well that all its clock operations requires the parent clock on. Therefore we enabled all clocks by default in clock driver initialization for other module clocks operate well. After patch 'clk: imx7d: using api with flag CLK_OPS_PARENT_ENABLE', clk core can handle such clock type well, so we don't have to enable them all by default anymore. Instead, we only enable a minimum required set of clocks. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-02clk: imx7d: using api with flag CLK_OPS_PARENT_ENABLEDong Aisheng1-357/+357
i.MX7D requires all clocks operations including enable/disable, rate change and re-parent with its parent clock on. Changing to the correct APIs to tell clk core such requirement. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-02clk: imx: add clk api for supporting CLK_OPS_PARENT_ENABLE clocksDong Aisheng1-0/+32
IMX SoCs like i.MX7D requires using CLK_OPS_PARENT_ENABLE flags, adding the corresponding clock APIs variants for easily to use. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-02clk: imx: re-order and concentrate the same type of clk apiDong Aisheng1-29/+29
Re-order and concentrate the same type of clk api for better code maintenance. Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-16clk: imx6ul: fix gpt2 clock namesDong Aisheng1-2/+2
fix gpt2 clock names Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-16clk: imx: refine the powerdown bit of clk-pllv3Dong Aisheng1-10/+10
The powerdown bit is a bit confused, let's change it to power_bit to relfect both powerdown and powerup case according to different plls. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-13clk: imx: clk-pllv3: fix incorrect handle of enet powerdown bitDong Aisheng1-4/+4
After commit f53947456f98 ("ARM: clk: imx: update pllv3 to support imx7"), the former used BM_PLL_POWER bit is not correct anymore for IMX7 ENET. Instead, pll->powerdown holds the correct bit, so using powerdown bit in clk_pllv3_{prepare | unprepare} functions. Fixes: f53947456f98 ("ARM: clk: imx: update pllv3 to support imx7") Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-12clk: imx: fix pll clock parentsDong Aisheng5-34/+34
pllx_bypass_src mux shouldn't be the parent of pllx clock since it's only valid when when pllx BYPASS bit is set. Thus it is actually one parent of pllx_bypass only. Instead, pllx parent should be fixed to osc according to reference manual. Other plls have the same issue. e.g. before fix, the pll tree is: osc 6 6 24000000 0 0 pll1_bypass_src 0 0 24000000 0 0 pll1 0 0 792000000 0 0 pll1_bypass 0 0 792000000 0 0 pll1_sys 0 0 792000000 0 0 After the fix, it's: osc 6 6 24000000 0 0 pll1 0 0 792000000 0 0 pll1_bypass 0 0 792000000 0 0 pll1_sys 0 0 792000000 0 0 Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-12clk: imx7d: correct dram pll typeAnson Huang1-1/+1
DRAM PLL is a audio/video type PLL, need to correct it to get correct ops of PLL. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-12clk: imx7d: correct dram root clk parent selectAnson Huang1-1/+1
DRAM root clk should be either from pll dram main clk or dram alt root clk. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-12clk: imx: correct AV PLL rate formulaAnson Huang1-2/+6
The audio/video PLL's rate calculation is as below in RM: Fref * (DIV_SELECT + NUM / DENOM), in origin clk-pllv3's code, below code is used: (parent_rate * div) + ((parent_rate / mfd) * mfn as it does NOT consider the float data using div, so below formula should be used as a decent method: (parent_rate * div) + ((parent_rate * mfn) / mfd) and we also need to consider parent_rate * mfd may overflow a 32 bit value, 64 bit value should be used. After updating this formula, the dram PLL's rate is 1066MHz, which is correct, while the old formula gets 1056MHz. [Aisheng: fix clk_pllv3_av_round_rate too] Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-05-13Merge tag 'imx-clk-fixes-4.6-2' of ↵Stephen Boyd2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next Pull some non-critical i.MX clk fixes from Shawn Guo: * Fix the commit 3713e3f5e927 ("clk: imx35: define two clocks for rtc") which messed up the clock enumeration when adding new clock. * tag 'imx-clk-fixes-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx35: restore existing used clock enumeration clk: imx6q: fix typo in CAN clock definition
2016-05-03clk: imx7d: fix ahb clock mux 1Stefan Agner1-1/+1
The clock parent of the AHB root clock when using mux option 1 is the SYS PLL 270MHz clock. This is specified in Table 5-11 Clock Root Table of the i.MX 7Dual Applications Processor Reference Manual. While it could be a documentation error, the 270MHz parent is also mentioned in the boot ROM configuration in Table 6-28: The clock is by default at 135MHz due to a POST_PODF value of 1 (=> divider of 2). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-27clk: imx: return correct frequency for Ethernet PLLStefan Agner1-1/+8
The i.MX 7 designs Ethernet PLL provides a 1000MHz reference clock. Store the reference clock in the clk_pllv3 structure according to the PLL type. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-18ARM: dts: imx35: restore existing used clock enumerationAlexander Kurz1-2/+2
A new element got inserted into enum mx35_clks with commit 3713e3f5e927 ("clk: imx35: define two clocks for rtc"). This insertion shifted most nummerical clock assignments to a new nummerical value which in turn rendered most hardcoded nummeric values in imx35.dtsi incorrect. Restore the existing order by moving the newly introduced clock to the end of the enum. Update the dts documentation accordingly. Signed-off-by: Alexander Kurz <akurz@blala.de> Fixes: 3713e3f5e927 ("clk: imx35: define two clocks for rtc") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-13clk: imx6q: fix typo in CAN clock definitionLothar Waßmann1-1/+1
commit ee36027427c7 ("clk: imx: Add clock support for imx6qp") introduced a regression due to a subtle typo in the 'can_root' clock definition. The effect is that trying to configure the bitrate of the can interfaces fails with -EDOM or produces a division by zero error due to the clock_freq of the can serial clock being reported as '0'. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Fixes: ee36027427c7 ("clk: imx: Add clock support for imx6qp") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-12clk: imx: vf610: add TCON ipg clockStefan Agner1-0/+3
Add the ipg (bus) clock for the TCON modules (Timing Controller). This module is required by the new DCU DRM driver, since the display signals pass through TCON. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-12clk: imx: vf610: fix DCU clock treeStefan Agner1-2/+2
Similar to an earlier fix for the SAI clocks, the DCU clock hierarchy mixes the bus clock with the display controllers pixel clock. Tests have shown that the gates in CCM_CCGR3/9 registers do not control the DCU pixel clock, but only the register access clock (bus clock). Fix this by defining the parent clock of VF610_CLK_DCUx to be the bus clock (ipg_bus). Since the clock has not been used far, there are no further changes needed. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-06clk: imx: add ckil clock for i.MX7Gary Bisson1-1/+2
Add the necessary clock to use the ckil on i.MX7. Inspired from the following patch: https://github.com/boundarydevices/linux-imx6/commit/b80e8271 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-31clk: imx: vf610: add suspend/resume supportStefan Agner1-0/+48
The clock register are lost when enterying LPSTOPx, hence provide suspend/resume functions restoring them. The clock gates get restored by the individual driver, hence we do not need to restore them here. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-31clk: imx: vf610: add WKPU unitStefan Agner1-0/+2
Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-31clk: imx: vf610: leave DDR clock onStefan Agner1-0/+3
To use STOP mode without putting DDR3 into self-refresh mode, we need to keep the DDR clock enabled. Use the new gate configuration with a value of 2 to make sure that the clock is enabled in RUN, WAIT and STOP mode. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-31clk: imx: clk-gate2: allow custom gate configurationStefan Agner2-5/+15
The 2-bit gates found i.MX and Vybrid SoC support different clock configuration: 0b00: clk disabled 0b01: clk enabled in RUN mode but disabled in WAIT and STOP mode 0b10: clk enabled in RUN, WAIT and STOP mode (only Vybrid) 0b11: clk enabled in RUN and WAIT mode For some clocks, we might want to configure different behaviour, e.g. a memory clock should be on even in STOP mode. Add a new function imx_clk_gate2_cgr which allow to configure specific gate values through the cgr_val parameter. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-31clk: imx6sx: Register SAI clocks as shared clocksFabio Estevam1-4/+6
SAIx and SAIx_IPG share the same bit fields in the CCM registers, so we should better register them via imx_clk_gate2_shared(). Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-03clk: imx: Remove CLK_IS_ROOTStephen Boyd1-1/+1
This flag is a no-op now. Remove usage of the flag. Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-03Merge tag 'imx-clk-4.6' of ↵Stephen Boyd2-59/+138
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next Pull i.MX clk updates from Shawn Guo: The i.MX clock update for 4.6: - Add the clock driver support for the latest i.MX6 family SoCs addition - i.MX6QP. - Clean up the whitespace in i.MX6UL clock driver and add the missing KPP clock. - Correct pwm7 clock name in i.MX6UL clock driver. * tag 'imx-clk-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: clk: imx: add kpp clock for i.MX6UL clk: imx: whitespace cleanup; no functional change clk: imx: correct pwm7 clock name in driver for i.MX6UL clk: imx: Add clock support for imx6qp
2016-02-28clk: imx: add kpp clock for i.MX6ULLothar Waßmann1-0/+1
Add the necessary clock to use the KPP interface on i.MX6UL. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-28clk: imx: whitespace cleanup; no functional changeLothar Waßmann1-31/+31
remove whitespace before TAB. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-18clk: imx: correct pwm7 clock name in driver for i.MX6ULAnatolij Gustschin1-1/+1
Don't capitalize p in the pwm7 clock name. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-14clk: imx: Add clock support for imx6qpBai Ping1-27/+105
most of the clock tree structures on i.MX6 Quad Plus are same as on i.MX6Q. there still some differences between these two SOCs. compared to the i.XM6Q, the differents of clocks on i.MX6QP is mainly on: 1. New clock gate added to support the PRE and PRG modules 2. 24MHz OSC clock option added to the UART, IPG, ECSPI, and CAN clock roots. 3. MMDC channel 1 clock gate is now controllable. 4. clock gating added to the LDB_DIx_IPU clocks on i.MX6QP 5. EMI clock root divider fix 6. other updates fo CSCMRx, CSCDRx and CS2CDR registers. detailed infomation, please refer to the i.MX6QP RM. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-01-29clk: move the common clock's to_clk_*(_hw) macros to clk-provider.hGeliang Tang4-8/+5
to_clk_*(_hw) macros have been repeatedly defined in many places. This patch moves all the to_clk_*(_hw) definitions in the common clock framework to public header clk-provider.h, and drop the local definitions. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-12-22Merge commit 'fe5fa8fbd4d47f40a45fa29ee1abdb10cb061ec2' into clk-nextMichael Turquette6-28/+30
2015-12-22Merge tag 'imx-clk-v4.5' of ↵Michael Turquette6-28/+30
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next The i.MX clock updates for 4.5: - Add is_prepared function callback for pllv3 clock driver - Use imx_check_clocks() on imx6ul and imx7d clock drivers to save some code - Add a core clock for imx7d to support generic cpufreq driver - Support imx6q clock routing with OSC to anaclk2/2b - To support more precise pixel clocks on imx5, allow ipu_di_sel clock selectors to influence the PLLs that they are derived from - A cleanup on imx25 OSC clock
2015-12-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here are a bunch of small bug fixes for various ARM platforms, nothing really sticks out this week, most of either fixes bugs in code that was just added in 4.4, or that has been broken for many years without anyone noticing. at91/sama5d2: - fix sama5de hardware setup of sd/mmc interface - proper selection of pinctrl drivers. PIO4 is necessary for sama5d2 berlin: - fix incorrect clock input for SDIO exynos: - Fix potential NULL pointer dereference in Exynos PMU driver. imx: - Fix vf610 SAI clock configuration bug which is discovered by the newly added master mode support in SAI audio driver. - Fix buggy L2 cache latency values in vf610 device trees, which may cause system hang when cpu runs at a higher frequency. ixp4xx: - fix prototypes for readl/writel functions ls2080a: - use little-endian register access for GPIO and SDHCI omap: - Fix clock source for ARM TWD and global timers on am437x - Always select REGULATOR_FIXED_VOLTAGE for omap2+ instead of when MACH_OMAP3_PANDORA is selected - Fix SPI DMA handles for dm816x as only some were mapped - Fix up mbox cells for dm816x to make mailbox usable pxa: - use PWM lookup table for all ezx machines s3c24xx: - Remove incorrect __init annotation from s3c24xx cpufreq driver structures. versatile: - fix PCI IRQ mapping on Versatile PB" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ls2080a/dts: Add little endian property for GPIO IP block dt-bindings: define little-endian property for QorIQ GPIO ARM64: dts: ls2080a: fix eSDHC endianness ARM: dts: vf610: use reset values for L2 cache latencies ARM: pxa: use PWM lookup table for all machines ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1 ARM: dts: berlin: correct BG2Q's sdhci2 2nd clock ARM: dts: am4372: fix clock source for arm twd and global timers ARM: at91: fix pinctrl driver selection ARM: at91/dt: add always-on to 1.8V regulator ARM: dts: vf610: fix clock definition for SAI2 ARM: imx: clk-vf610: fix SAI clock tree ARM: ixp4xx: fix read{b,w,l} return types irqchip/versatile-fpga: Fix PCI IRQ mapping on Versatile PB ARM: OMAP2+: enable REGULATOR_FIXED_VOLTAGE ARM: dts: add dm816x missing spi DT dma handles ARM: dts: add dm816x missing #mbox-cells cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __init ARM: EXYNOS: Fix potential NULL pointer access in exynos_sys_powerdown_conf
2015-12-02clk: imx5: ipu_di_sel clocks can set parent ratesPatrick Brünn1-4/+4
To obtain exact pixel clocks, allow the DI clock selectors to influence the PLLs that they are derived from. Commit 4591b13289b5 ("ARM: i.MX6: ipu_di_sel clocks can set parent rates") did this for i.MX6. Port it to enable high display resolutions on i.MX53 based platforms such as CX9020 Embedded PC, too. Signed-off-by: Patrick Brünn <p.bruenn@beckhoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-02clk: imx: Replace clk error check with imx_check_clocks()Bai Ping2-7/+2
As we already have a 'imx_check_clocks' to do the clock error check, so cleanup the error check code. Signed-off-by: Bai Ping <b51503@freescale.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-02clk: imx: Add a virtual arm clk on i.mx7dBai Ping1-0/+6
Add a virtual arm clk to abstract the actual steps when changing the ARM core frequency.So we can using the 'cpufreq-dt' driver on i.MX7D/Solo. Signed-off-by: Bai Ping <b51503@freescale.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-02ARM: imx: clk-vf610: fix SAI clock treeStefan Agner1-4/+4
The Synchronous Audio Interface (SAI) instances are clocked by independent clocks: The bus clock and the audio clock (as shown in Figure 51-1 in the Vybrid Reference Manual). The clock gates in CCGR0/CCGR1 for SAI0 through SAI3 are bus clock gates, as access tests to the registers with/without gating those clocks have shown. The audio clock is gated by the SAIx_EN gates in CCM_CSCDR1, followed by a clock divider (SAIx_DIV). Currently, the parent of the bus clock gates has been assigned to SAIx_DIV, which is not involved in the bus clock path for the SAI instances (see chapter 9.10.12, SAI clocking in the Vybrid Reference Manual). Fix this by define the parent clock of VF610_CLK_SAIx to be the bus clock. If the driver needs the audio clock (when used in master mode), a fixed device tree is required which assign the audio clock properly to VF610_CLK_SAIx_DIV. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-11-30imx/clk-pllv2: fix wrong do_div() usageNicolas Pitre1-4/+5
do_div() is meant to be used with an unsigned dividend. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-30imx/clk-pllv1: fix wrong do_div() usageNicolas Pitre1-7/+7
do_div() is meant to be used with an unsigned dividend. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-25clk: imx: clk-imx6q: Let OSC to be routed to anaclk2/2bMichael Trimarchi1-1/+2
OSC can be used as USB hub source clock. An example we can route to CLK2_P imx6 pin. This show a usage example: [...] usb_hub: usb-hub { compatible = "smsc,usb3503a"; clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>; clock-names = "refclk"; }; }; [...] &clks { assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>; }; /sys/kernel/debug/clk/clk_summary osc 5 5 24000000 0 0 [...] lvds2_sel 1 1 24000000 0 0 lvds2_gate 1 1 24000000 0 0 [...] Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-11-25clk: imx: add 'is_prepared' clk_ops callback for pllv3 clkBai Ping1-0/+14
Add 'is_prepared' callback function for pllv3 type clk to make sure when the system is bootup, the unused clk is in a known state to match the prepare count info. Signed-off-by: Bai Ping <b51503@freescale.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-11-25clk: imx25: Remove osc clock from driverMarkus Pargmann1-16/+2
The 'osc' clock is already initialized by the fixed clock defined in imx25.dtsi. The imx25 clock driver tries to add this clock for a second time and fails with -EEXIST: i.MX clk 1: register failed with -17 As the clock is already properly setup in DT with a different driver, we can completely remove the handling in the imx25 clock driver. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-10-22clk: imx31: add missing of_node_putJulia Lawall1-1/+3
for_each_compatible_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression n; expression e; @@ for_each_compatible_node(n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-22clk: imx27: add missing of_node_putJulia Lawall1-1/+3
for_each_compatible_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression n; expression e; @@ for_each_compatible_node(n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-16Merge tag 'imx-clk-4.4' of ↵Stephen Boyd13-31/+209
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next Pull i.MX updates from Shawn Guo: "The i.MX clock updates for 4.4: - A couple of fixes on i.MX31 and i.MX35 clock initialization functions which makes mxc_timer_init() currently be called twice for DT boot. - Increase i.MX6UL AXI bus clock rate to 264MHz which is the optimal design target. - Add a few missing clocks, ADC clock for i.MX7D, OCOTP clock for Vybrid, and SPDIF_GCLK for i.MX6. - A series from Lucas to fix early debug UART clock setup. This is currently a one-off fix for i.MX platform, and can be extended to become a generic solution later." * tag 'imx-clk-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: clk: imx6: Add SPDIF_GCLK clock in clock tree clk: imx7d: add ADC root clock clk: imx31: Do not call mxc_timer_init twice when booting with DT clk: imx7d: retain early UART clocks during kernel init clk: imx6: retain early UART clocks during kernel init clk: imx5: retain early UART clocks during kernel init clk: imx35: retain early UART clocks during kernel init clk: imx31: retain early UART clocks during kernel init clk: imx27: retain early UART clocks during kernel init clk: imx25: retain early UART clocks during kernel init clk: imx: add common logic to detect early UART usage clk: imx35: Do not call mxc_timer_init twice when booting with DT clk: clk-vf610: Add clock for Vybrid OCOTP controller clk: imx: increase AXI clock rate to 264MHz for i.MX6UL
2015-10-12clk: imx6: Add SPDIF_GCLK clock in clock treeShengjiu Wang3-2/+7
Correct SPDIF clock setting issue in clock tree, the SPDIF_GCLK is also one clock of SPDIF, which is missed before. We found an issue that imx can't enter low power mode with spdif if IMX6x_CLK_SPDIF is used as the core clock of spdif. Because spdif driver will register IMX6x_CLK_SPDIF clock to regmap, regmap will do clk_prepare in init function, then IMX6x_CLK_SPDIF clock is prepared in probe, so its parent clock (PLL clock) is prepared, the prepare operation of PLL clock is to enable the clock. But I.MX needs all PLL clock is disabled, then it can enter low power mode. So we can't use IMX6x_CLK_SPDIF as the core clock of spdif, the correct spdif core clock is SPDIF_GCLK, which share same gate bit with IMX6x_CLK_SPDIF clock. SPDIF_GCLK's parent clock is ipg clock. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-10-09clk: imx7d: add ADC root clockHaibo Chen1-0/+1
Add ADC root clock support in imx7d clock tree. Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 03:37:20 +0300