summaryrefslogtreecommitdiff
path: root/drivers/clk/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2017-07-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-0/+1
Pull MIPS updates from Ralf Baechle: "Boston platform support: - Document DT bindings - Add CLK driver for board clocks CM: - Avoid per-core locking with CM3 & higher - WARN on attempt to lock invalid VP, not BUG CPS: - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 - Prevent multi-core with dcache aliasing - Handle cores not powering down more gracefully - Handle spurious VP starts more gracefully DSP: - Add lwx & lhx missaligned access support eBPF: - Add MIPS support along with many supporting change to add the required infrastructure Generic arch code: - Misc sysmips MIPS_ATOMIC_SET fixes - Drop duplicate HAVE_SYSCALL_TRACEPOINTS - Negate error syscall return in trace - Correct forced syscall errors - Traced negative syscalls should return -ENOSYS - Allow samples/bpf/tracex5 to access syscall arguments for sane traces - Cleanup from old Kconfig options in defconfigs - Fix PREF instruction usage by memcpy for MIPS R6 - Fix various special cases in the FPU eulation - Fix some special cases in MIPS16e2 support - Fix MIPS I ISA /proc/cpuinfo reporting - Sort MIPS Kconfig alphabetically - Fix minimum alignment requirement of IRQ stack as required by ABI / GCC - Fix special cases in the module loader - Perform post-DMA cache flushes on systems with MAARs - Probe the I6500 CPU - Cleanup cmpxchg and add support for 1 and 2 byte operations - Use queued read/write locks (qrwlock) - Use queued spinlocks (qspinlock) - Add CPU shared FTLB feature detection - Handle tlbex-tlbp race condition - Allow storing pgd in C0_CONTEXT for MIPSr6 - Use current_cpu_type() in m4kc_tlbp_war() - Support Boston in the generic kernel Generic platform: - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board - yamon-dt: Support > 256MB of RAM - yamon-dt: Use serial* rather than uart* aliases - Abstract FDT fixup application - Set RTC_ALWAYS_BCD to 0 - Add a MAINTAINERS entry core kernel: - qspinlock.c: include linux/prefetch.h Loongson 3: - Add support Perf: - Add I6500 support SEAD-3: - Remove GIC timer from DT - Set interrupt-parent per-device, not at root node - Fix GIC interrupt specifiers SMP: - Skip IPI setup if we only have a single CPU VDSO: - Make comment match reality - Improvements to time code in VDSO" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits) locking/qspinlock: Include linux/prefetch.h MIPS: Fix MIPS I ISA /proc/cpuinfo reporting MIPS: Fix minimum alignment requirement of IRQ stack MIPS: generic: Support MIPS Boston development boards MIPS: DTS: img: Don't attempt to build-in all .dtb files clk: boston: Add a driver for MIPS Boston board clocks dt-bindings: Document img,boston-clock binding MIPS: Traced negative syscalls should return -ENOSYS MIPS: Correct forced syscall errors MIPS: Negate error syscall return in trace MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select MIPS16e2: Provide feature overrides for non-MIPS16 systems MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions MIPS: MIPS16e2: Identify ASE presence MIPS: VDSO: Fix a mismatch between comment and preprocessor constant MIPS: VDSO: Add implementation of gettimeofday() fallback MIPS: VDSO: Add implementation of clock_gettime() fallback MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() MIPS: Use current_cpu_type() in m4kc_tlbp_war() ...
2017-07-11clk: boston: Add a driver for MIPS Boston board clocksPaul Burton1-0/+1
Add a driver for the clocks provided by the MIPS Boston board from Imagination Technologies. 2 clocks are provided - the system clock & the CPU clock - and each is a simple fixed rate clock whose frequency can be determined by reading a register provided by the board. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16483/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-21clk: Add Gemini SoC clock controllerLinus Walleij1-0/+1
The Cortina Systems Gemini (SL3516/CS3516) has an on-chip clock controller that derive all clocks from a single crystal, using some documented and some undocumented PLLs, half dividers, counters and gates. This is a best attempt to construct a clock driver for the clocks so at least we can gate off unused hardware and driver the PCI bus clock. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [sboyd@codeaurora.org: Fix devm_ioremap_resource() return value checking] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-14clk: keystone: Add sci-clk driver supportTero Kristo1-1/+1
In K2G, the clock handling is done through firmware executing on a separate core. Linux kernel needs to communicate to the firmware through TI system control interface to access any power management related resources, including clocks. The keystone sci-clk driver does this, by communicating to the firmware through the TI SCI driver. The driver adds support for registering clocks through DT, and basic required clock operations like prepare/get_rate, etc. Signed-off-by: Tero Kristo <t-kristo@ti.com> [sboyd@codeaurora.org: Make ti_sci_init_clocks() static] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-03Merge branch 'clk-bulk-get' into clk-nextStephen Boyd1-1/+1
* clk-bulk-get: clk: add managed version of clk_bulk_get clk: add clk_bulk_get accessories
2017-06-03clk: add clk_bulk_get accessoriesDong Aisheng1-1/+1
These helper function allows drivers to get several clk consumers in one operation. If any of the clk cannot be acquired then any clks that were got will be put before returning to the caller. This can relieve the driver owners' life who needs to handle many clocks, as well as each clock error reporting. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Anson Huang <anson.huang@nxp.com> Cc: Robin Gong <yibin.gong@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Octavian Purdila <octavian.purdila@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-05-24clk: renesas: Rework Kconfig and Makefile logicGeert Uytterhoeven1-1/+1
The goals are to: - Allow precise control over and automatic selection of which (sub)drivers are used for which SoC (which may change in the future), - Allow adding support for new SoCs easily, - Allow compile-testing of all (sub)drivers, - Keep driver selection logic in the subsystem-specific Kconfig, independent from the architecture-specific Kconfig (i.e. no "select" from arch/arm64/Kconfig.platforms), to avoid dependencies. This is implemented by: - Introducing Kconfig symbols for all drivers and sub-drivers, - Introducing the Kconfig symbol CLK_RENESAS, which is enabled automatically when building for a Renesas ARM platform, and which enables all required drivers without interaction of the user, based on SoC-specific ARCH_* symbols, - Allowing the user to enable any Kconfig symbol manually if COMPILE_TEST is enabled, - Using the new Kconfig symbols instead of the ARCH_* symbols to control compilation in the Makefile, - Always entering drivers/clk/renesas/ during the build. Note that currently not all (sub)drivers are enabled for compile-testing, as they depend on independent fixes in other subsystems. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-22clk: hi6220: Add the hi655x's pmic clockDaniel Lezcano1-0/+1
The hi655x multi function device is a PMIC providing regulators. The PMIC also provides a clock for the WiFi and the Bluetooth, let's implement this clock in order to add it in the hi655x MFD and allow proper wireless initialization. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> [sboyd@codeaurora.org: Remove clkdev usage] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-27clk: Make x86/ conditional on CONFIG_COMMON_CLKPierre-Louis Bossart1-0/+2
Fix Makefile for x86 support, dependency on CONFIG_COMMON_CLK was not explicit Fixes: 701190fd7419 ('clk: x86: add support for Lynxpoint LPSS clocks') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-21clk: vc5: Add support for IDT VersaClock 5P49V5923 and 5P49V5933Marek Vasut1-0/+1
Add driver for IDT VersaClock 5 5P49V5923 and 5P49V5933 chips. These chips have two clock inputs, XTAL or CLK, which are muxed into single PLL/VCO input. In case of 5P49V5923, the XTAL in built into the chip while the 5P49V5923 requires external XTAL. The PLL feeds two fractional dividers. Each fractional divider feeds output mux, which allows selecting between clock from the fractional divider itself or from output mux on output N-1. In case of output mux 0, the output N-1 is instead connected to the output from the mux feeding the PLL. The driver thus far supports only the 5P49V5923 and 5P49V5933, while it should be easily extensible to the whole 5P49V59xx family of chips as they are all pretty similar. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-renesas-soc@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-24clk: Loongson1: Refactor Loongson1 clockKelvin Cheung1-1/+1
Factor out the common functions into loongson1/clk.c to support both Loongson1B and Loongson1C. And, put the rest into loongson1/clk-loongson1b.c. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-17clk: uniphier: add core support code for UniPhier clock driverMasahiro Yamada1-0/+1
This includes UniPhier clock driver code, except SoC-specific data arrays. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-16clk: max77686: Combine Maxim max77686 and max77802 driverLaxman Dewangan1-2/+0
The clock IP used on the Maxim PMICs max77686 and max77802 are same. The configuration of clock register is also same except the number of clocks. Part of common code utilisation, there is 3 files for these chips clock driver, one for common and two files for driver registration. Combine both drivers into single file and move common code into same common file reduces the 2 files and make max77686 and max77802 clock driver in single fine. This driver does not depends on the parent driver structure. The regmap handle is acquired through regmap APIs for the register access. This combination of driver helps on adding clock driver for different Maxim PMICs which has similar clock IP like MAX77620 and MAX20024. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> CC: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19clk: Makefile: re-sort and clean upMichael Turquette1-9/+11
Sorting is hard. Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-07-09Merge branch 'clk-sunxi-ng' into clk-nextMichael Turquette1-0/+1
2016-07-09clk: sunxi-ng: Add common infrastructureMaxime Ripard1-0/+1
Start our new clock infrastructure by adding the registration code, common structure and common code. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-3-maxime.ripard@free-electrons.com
2016-06-23clk: meson: only build selected platformsMichael Turquette1-1/+1
Break the AmLogic clock code up so that only the necessary parts are compiled and linked. The core code is selected by both arm and arm64 builds with COMMON_CLK_AMLOGIC. The individual drivers have their own config options as well. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-21Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "It's the usual big pile of driver updates and additions, but we do have a couple core changes in here as well. Core: - CLK_IS_CRITICAL support has been added. This should allow drivers to properly express that a certain clk should stay on even if their prepare/enable count drops to 0 (and in turn the parents of these clks should stay enabled). - A clk registration API has been added, clk_hw_register(), and an OF clk provider API has been added, of_clk_add_hw_provider(). These APIs have been put in place to further split clk providers from clk consumers, with the goal being to have clk providers never deal with struct clk pointers at all. Conversion of provider drivers is on going. clkdev has also gained support for registering clk_hw pointers directly so we can convert drivers that don't use devicetree. New Drivers: - Marvell ap806 and cp110 system controllers (with clks inside!) - Hisilicon Hi3519 clock and reset controller - Axis ARTPEC-6 clock controllers - Oxford Semiconductor OXNAS clock controllers - AXS10X I2S PLL - Rockchip RK3399 clock and reset controller Updates: - MMC2 and UART2 clks on Samsung Exynos 3250, ACLK on Samsung Exynos 542x SoCs, and some more clk ID exporting for bus frequency scaling - Proper BCM2835 PCM clk support and various other clks - i.MX clk updates for i.MX6SX, i.MX7, and VF610 - Renesas updates for R-Car H3 - Tegra210 got updates for DisplayPort and HDMI 2.0 - Rockchip driver refactorings and fixes due to adding RK3399 support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (139 commits) clk: fix critical clock locking clk: qcom: mmcc-8996: Remove clocks that should be controlled by RPM clk: ingenic: Allow divider value to be divided clk: sunxi: Add display and TCON0 clocks driver clk: rockchip: drop old_rate calculation on pll rate changes clk: rockchip: simplify GRF handling in pll clocks clk: rockchip: lookup General Register Files in rockchip_clk_init clk: rockchip: fix the rk3399 sdmmc sample / drv name clk: mvebu: new driver for Armada CP110 system controller dt-bindings: arm: add DT binding for Marvell CP110 system controller clk: mvebu: new driver for Armada AP806 system controller clk: hisilicon: add CRG driver for hi3519 soc clk: hisilicon: export some hisilicon APIs to modules reset: hisilicon: add reset controller driver for hisilicon SOCs clk: bcm/kona: Do not use sizeof on pointer type clk: qcom: msm8916: Fix crypto clock flags clk: nxp: lpc18xx: Initialize clk_init_data::flags to 0 clk/axs10x: Add I2S PLL clock driver clk: imx7d: fix ahb clock mux 1 clk: fix comment of devm_clk_hw_register() ...
2016-05-13CLK: microchip: Add Microchip PIC32 clock driver.Purna Chandra Mandal1-0/+1
This clock driver implements PIC32 specific clock-tree. clock-tree entities can only be configured through device-tree file (OF). Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-clk@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13247/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-06clk/axs10x: Add I2S PLL clock driverJose Abreu1-0/+1
The ARC SDP I2S clock can be programmed using a specific PLL. This patch has the goal of adding a clock driver that programs this PLL. At this moment the rate values are hardcoded in a table but in the future it would be ideal to use a function which determines the PLL values given the desired rate. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-04-22clk: Add Oxford Semiconductor OXNAS Standard ClocksNeil Armstrong1-0/+1
Add Oxford Semiconductor OXNAS SoC Family Standard Clocks support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [sboyd@codeaurora.org: Drop NULL/continue check in registration loop] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-04-16Merge branch 'clk-artpec6' into clk-nextStephen Boyd1-0/+1
* clk-artpec6: clk: add artpec-6 clock controller clk: add device tree binding for Artpec-6 clock controller
2016-04-16clk: add artpec-6 clock controllerLars Persson1-0/+1
Add a driver for the main clock controller of the Artpec-6 Soc. Signed-off-by: Lars Persson <larper@axis.com> [sboyd@codeaurora.org: Reformatted driver structure and of match] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-04-02clk: unconditionally recurse into clk/mvebu/Thomas Petazzoni1-1/+1
The drivers/clk/mvebu directory is only being built when CONFIG_PLAT_ORION=y. As we are going to support additional mvebu platforms in drivers/clk/mvebu, which don't have CONFIG_PLAT_ORION=y, we need to recurse into this directory regardless of the value of CONFIG_PLAT_ORION. Since all files in drivers/clk/mvebu/ are already conditionally compiled depending on various Kconfig options, we can recurse unconditionally into drivers/clk/mvebu without any other change. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-03clk: renesas: move drivers to renesas directorySimon Horman1-1/+1
This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Along with the above mentioned Kconfig changes it seems appropriate to also rename directories that only hold drivers for such SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02Merge branch 'clk-ti' into clk-nextMichael Turquette1-1/+1
Conflicts: drivers/clk/Kconfig
2016-03-02clk: ti: Allow COMPILE_TEST to build selected driversTony Lindgren1-1/+1
The arch independent drivers can be build testeed with COMPILE_TEST. Let's allow that for drivers/clk/ti. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-02-26clk: shmobile: Remove ARCH_SHMOBILE_MULTISimon Horman1-1/+0
As of 9b5ba0df4ea4 ("ARM: shmobile: Introduce ARCH_RENESAS") all platforms that use Renesas clock drivers now select ARCH_RENESAS. As it is present in drivers/clk/Makefile ARCH_SHMOBILE_MULTI may now be removed. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29clk: tango4: rename ARCH_TANGOX to ARCH_TANGOMarc Gonzalez1-1/+1
Requested by arm-soc maintainer Kevin Hilman in v9 review. http://article.gmane.org/gmane.linux.ports.arm.kernel/456331 Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-12-24Merge branch 'clk-lpc32xx' into clk-nextMichael Turquette1-1/+1
2015-12-24clk: lpc18xx: add NXP specific COMMON_CLK_NXP configuration symbolVladimir Zapolskiy1-1/+1
The change adds COMMON_CLK_NXP configuration symbol and enables it for NXP LPC18XX architecture, this is needed to reuse drivers/clk/nxp folder for NXP common clock framework drivers other than LPC18XX one. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-22Merge branch 'clk-shmobile-for-v4.5' of ↵Michael Turquette1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next
2015-12-08clk: shmobile: r8a7795: Add new CPG/MSSR driverGeert Uytterhoeven1-0/+1
Add a new R-Car H3 Clock Pulse Generator / Module Standby and Software Reset driver, using the new CPG/MSSR driver core. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-12-01clk: add CS2000 Fractional-N driverKuninori Morimoto1-0/+1
This patch adds CS2000 Fractional-N driver as clock provider. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [sboyd@codeaurora.org: Fix unsigned checked for < 0 in cs2000_ratio_get()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-16clk: tango4: clkgen driver for Tango4 platformsMarc Gonzalez1-0/+1
Provide support for Sigma Designs Tango4 clock generator. NOTE: This driver is incompatible with Tango3 clkgen. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> [sboyd@codeaurora.org: Add kernel.h include for panic/sprintf] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-11Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "As we've enabled multiplatform kernels on ARM, and greatly done away with the contents under arch/arm/mach-*, there's still need for SoC-related drivers to go somewhere. Many of them go in through other driver trees, but we still have drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code that might be shared between ARM and ARM64 (or just in general makes sense to not have under the architecture directory). This branch contains mostly such code: - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to communicate with power management blocks on these SoCs for use by clock, regulator and bus frequency drivers. - Allwinner Reduced Serial Bus driver, again used to communicate with PMICs. - Drivers for ARM's SCPI (System Control Processor). Not to be confused with PSCI (Power State Coordination Interface). SCPI is used to communicate with the assistant embedded cores doing power management, and we have yet to see how many of them will implement this for their hardware vs abstracting in other ways (or not at all like in the past). - To make confusion between SCPI and PSCI more likely, this release also includes an update of PSCI to interface version 1.0. - Rockchip support for power domains. - A driver to talk to the firmware on Raspberry Pi" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits) soc: qcom: smd-rpm: Correct size of outgoing message bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings ARM: bcm2835: add mutual inclusion protection drivers: psci: make PSCI 1.0 functions initialization version dependent dt-bindings: Correct paths in Rockchip power domains binding document soc: rockchip: power-domain: don't try to print the clock name in error case soc: qcom/smem: add HWSPINLOCK dependency clk: berlin: add cpuclk ARM: berlin: dts: add CLKID_CPU for BG2Q ARM: bcm2835: Add the Raspberry Pi firmware driver soc: qcom: smem: Move RPM message ram out of smem DT node soc: qcom: smd-rpm: Correct the active vs sleep state flagging soc: qcom: smd: delete unneeded of_node_put firmware: qcom-scm: build for correct architecture level soc: qcom: smd: Correct SMEM items for upper channels qcom-scm: add missing prototype for qcom_scm_is_available() qcom-scm: fix endianess issue in __qcom_scm_is_call_available soc: qcom: smd: Reject send of too big packets soc: qcom: smd: Handle big endian CPUs ...
2015-10-22Merge branch 'clk-iproc' into clk-nextStephen Boyd1-1/+1
* clk-iproc: clk: iproc: define Broadcom NS2 iProc clock binding clk: iproc: define Broadcom NSP iProc clock binding clk: ns2: add clock support for Broadcom Northstar 2 SoC clk: iproc: Separate status and control variables clk: iproc: Split off dig_filter clk: iproc: Add PLL base write function clk: nsp: add clock support for Broadcom Northstar Plus SoC clk: iproc: Add PWRCTRL support clk: cygnus: Convert all macros to all caps ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabled
2015-10-22clk: ns2: add clock support for Broadcom Northstar 2 SoCJon Mason1-1/+1
The Broadcom Northstar 2 SoC is architected under the iProc architecture. It has the following PLLs: GENPLL SCR, GENPLL SW, LCPLL DDR, LCPLL Ports, all derived from an onboard crystal. Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-22Merge tag 'sunxi-clocks-for-4.4' of ↵Stephen Boyd1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next Pull Allwinner clock additions for 4.4 from Maxime Ripard: - Support for the Audio PLL and child clocks - Support for the A33 AHB gates - New clk-multiplier generic driver * tag 'sunxi-clocks-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: clk: sunxi: mod1 clock support clk: sunxi: codec clock support clk: sunxi: pll2: Add A13 support clk: sunxi: Add a driver for the PLL2 clk: Add a basic multiplier clock clk: sunxi: Add A33 gates support
2015-10-21clk: Add a basic multiplier clockMaxime Ripard1-0/+1
Some clocks are using a multiplier component, however, unlike their mux, gate or divider counterpart, these factors don't have a basic clock implementation. This leads to code duplication across platforms that want to use that kind of clocks, and the impossibility to use the composite clocks with such a clock without defining your own rate operations. Create such a driver in order to remove these issues, and hopefully factor the implementations, reducing code size across platforms and consolidating the various implementations. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2015-10-12Merge branch 'clk-bcm2835' into clk-nextStephen Boyd1-1/+0
* clk-bcm2835: clk: bcm2835: Add support for programming the audio domain clocks clk: bcm2835: Add binding docs for the new platform clock driver. clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers.
2015-10-09Add driver for the si514 clock generator chipMike Looijmans1-0/+1
This patch adds the driver and devicetree documentation for the Silicon Labs SI514 clock generator chip. This is an I2C controlled oscillator capable of generating clock signals ranging from 100kHz to 250MHz. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> [sboyd@codeaurora.org: Drop clk.h include, remove some casts] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-02clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers.Eric Anholt1-1/+0
clk-bcm2835.c predates the drivers under bcm/, but all the new BCM drivers are going in there so let's follow them. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-09-28clk: add support for clocks provided by SCP(System Control Processor)Sudeep Holla1-0/+1
On some ARM based systems, a separate Cortex-M based System Control Processor(SCP) provides the overall power, clock, reset and system control. System Control and Power Interface(SCPI) Message Protocol is defined for the communication between the Application Cores(AP) and the SCP. This patch adds support for the clocks provided by SCP using SCPI protocol. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@baylibre.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Jon Medhurst (Tixy) <tixy@linaro.org> Cc: linux-clk@vger.kernel.org
2015-07-07clk: Rename clk-gpio-gate.c to clk-gpio.cSergej Sawazki1-1/+1
The file clk-gpio-gate.c does not only contain the gate clock, but also the mux clock. Rename the file to clk-gpio.c. Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by: Sergej Sawazki <ce3a@gmx.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-02Merge tag 'clk-for-linus-4.2' of ↵Linus Torvalds1-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clock framework updates from Michael Turquette: "The changes to the common clock framework for 4.2 are dominated by new drivers and updates to existing ones, as usual. There are some fixes to the framework itself and several cleanups for sparse warnings, etc" * tag 'clk-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (135 commits) clk: stm32: Add clock driver for STM32F4[23]xxx devices dt-bindings: Document the STM32F4 clock bindings cpufreq: exynos: remove Exynos4210 specific cpufreq driver support ARM: Exynos: switch to using generic cpufreq driver for Exynos4210 clk: samsung: exynos4: add cpu clock configuration data and instantiate cpu clock clk: samsung: add infrastructure to register cpu clocks clk: add CLK_RECALC_NEW_RATES clock flag for Exynos cpu clock support doc: dt: add documentation for lpc1850-ccu clk driver clk: add lpc18xx ccu clk driver doc: dt: add documentation for lpc1850-cgu clk driver clk: add lpc18xx cgu clk driver clk: keystone: add support for post divider register for main pll clk: mvebu: flag the crypto clk as CLK_IGNORE_UNUSED clk: cygnus: remove Cygnus dummy clock binding clk: cygnus: add clock support for Broadcom Cygnus clk: Change bcm clocks build dependency clk: iproc: add initial common clock support clk: iproc: define Broadcom iProc clock binding MAINTAINERS: update email for Michael Turquette clk: meson: add some error handling in meson_clk_register_cpu() ...
2015-06-27Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-1/+2
Pull MIPS updates from Ralf Baechle: - Improvements to the tlb_dump code - KVM fixes - Add support for appended DTB - Minor improvements to the R12000 support - Minor improvements to the R12000 support - Various platform improvments for BCM47xx - The usual pile of minor cleanups - A number of BPF fixes and improvments - Some improvments to the support for R3000 and DECstations - Some improvments to the ATH79 platform support - A major patchset for the JZ4740 SOC adding support for the CI20 platform - Add support for the Pistachio SOC - Minor BMIPS/BCM63xx platform support improvments. - Avoid "SYNC 0" as memory barrier when unlocking spinlocks - Add support for the XWR-1750 board. - Paul's __cpuinit/__cpuinitdata cleanups. - New Malta CPU board support large memory so enable ZONE_DMA32. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits) MIPS: spinlock: Adjust arch_spin_lock back-off time MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA MIPS: BCM47xx: Simplify handling SPROM revisions MIPS: Cobalt Don't use module_init in non-modular MTD registration. MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ MIPS: use for_each_sg() MIPS: BCM47xx: Don't select BCMA_HOST_PCI MIPS: BCM47xx: Add helper variable for storing NVRAM length MIPS: IRQ/IP27: Move IRQ allocation API to platform code. MIPS: Replace smp_mb with release barrier function in unlocks. MIPS: i8259: DT support MIPS: Malta: Basic DT plumbing MIPS: include errno.h for ENODEV in mips-cm.h MIPS: Define GCR_GIC_STATUS register fields MIPS: BPF: Introduce BPF ASM helpers MIPS: BPF: Use BPF register names to describe the ABI MIPS: BPF: Move register definition to the BPF header MIPS: net: BPF: Replace RSIZE with SZREG MIPS: BPF: Free up some callee-saved registers MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers ...
2015-06-26Merge tag 'armsoc-soc' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform support updates from Kevin Hilman: "Our SoC branch usually contains expanded support for new SoCs and other core platform code. Some highlights from this round: - sunxi: SMP support for A23 SoC - socpga: big-endian support - pxa: conversion to common clock framework - bcm: SMP support for BCM63138 - imx: support new I.MX7D SoC - zte: basic support for ZX296702 SoC" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (134 commits) ARM: zx: Add basic defconfig support for ZX296702 ARM: dts: zx: add an initial zx296702 dts and doc clk: zx: add clock support to zx296702 dt-bindings: Add #defines for ZTE ZX296702 clocks ARM: socfpga: fix build error due to secondary_startup MAINTAINERS: ARM64: EXYNOS: Extend entry for ARM64 DTS ARM: ep93xx: simone: support for SPI-based MMC/SD cards MAINTAINERS: update Shawn's email to use kernel.org one ARM: socfpga: support suspend to ram ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10 ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5 ARM: EXYNOS: register power domain driver from core_initcall ARM: EXYNOS: use PS_HOLD based poweroff for all supported SoCs ARM: SAMSUNG: Constify platform_device_id ARM: EXYNOS: Constify irq_domain_ops ARM: EXYNOS: add coupled cpuidle support for Exynos3250 ARM: EXYNOS: add exynos_get_boot_addr() helper ARM: EXYNOS: add exynos_set_boot_addr() helper ARM: EXYNOS: make exynos_core_restart() less verbose ARM: EXYNOS: fix exynos_boot_secondary() return value on timeout ...
2015-06-23h8300: clock driverYoshinori Sato1-0/+1
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2015-06-23clk: stm32: Add clock driver for STM32F4[23]xxx devicesDaniel Thompson1-0/+1
The driver supports decoding and statically modelling PLL state (i.e. we inherit state from bootloader) and provides support for all peripherals that support simple one-bit gated clocks. The covers all peripherals whose clocks come from the AHB, APB1 or APB2 buses. It has been tested on an STM32F429I-Discovery board. The clock counts for TIM2, USART1 and SYSTICK are all set correctly and the wall clock looks OK when checked with a stopwatch. I have also tested a prototype driver for the RNG hardware. The RNG clock is correctly enabled by the framework (also did inverse test and proved that by changing DT to configure the wrong clock bit then we observe the RNG driver to fail). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> [sboyd@codeaurora.org: Silence sparse warnings] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>