summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)AuthorFilesLines
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky1-1/+1
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-12pktcdvd: fix defective misuses of pkt_<level>Joe Perches1-3/+3
Fix thinkos where pkt_<level> needs a valid pktcdvd_device * and the pointer is known to be NULL. Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> (go smatch!) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12pktcdvd: add struct pktcdvd_device * to pkt_dump_sense()Joe Perches1-15/+16
Allow the device name to be emitted with pkt_err when logging the sense data. Signed-off-by: Joe Perches <joe@perches.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12pktcdvd: convert pr_info to pkt_infoJoe Perches1-6/+8
Add a new pkt_info macro to prefix the name to the logging output. Signed-off-by: Joe Perches <joe@perches.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12pktcdvd: convert pr_notice to pkt_noticeJoe Perches1-10/+12
Add a new pkt_notice macro to prefix the name to the logging output. Signed-off-by: Joe Perches <joe@perches.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12pktcdvd: add struct pktcdvd_device.name to pr_err logging where possibleJoe Perches1-20/+24
Add a new pkt_err macro to prefix the name to the logging output. Convert pr_err where there is a non-null struct pktcdvd_device. Includes improvements from Andy Shevchenko. Signed-off-by: Joe Perches <joe@perches.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12pktcdvd: add struct pktcdvd_device * to pkt_dbgJoe Perches1-48/+42
Add pd->name to output for these debugging messages. Remove normally compiled out pkt_dbg(2, ...) function entry tracing equivalents as it's better done via the function tracer. Signed-off-by: Joe Perches <joe@perches.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12pktcdvd: consolidate DPRINTK and VPRINTK macrosJoe Perches1-54/+53
Use the more common pkt_dbg(level, fmt, ...) form. These messages are emitted at KERN_NOTICE. Always emit function name with pkt_dbg(2, ...) uses and remove the sometimes abbreviated embedded function name. This form always verifies the format and arguments. Signed-off-by: Joe Perches <joe@perches.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12pktcdvd: convert printk to pr_<level>Joe Perches1-61/+61
Use a more current logging style and add messages levels to the logging messages. Simplify pkt_dump_sense by using %*ph and adding a simple function to emit the sense string. Includes improvements from Andy Shevchenko and Dan Carpenter. Signed-off-by: Joe Perches <joe@perches.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12pktcdvd: convert ZONE macro to static function get_zone()Joe Perches1-10/+10
Macros should be converted to functions where feasible to verify arguments and the like. Signed-off-by: Joe Perches <joe@perches.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12aoe: do not BUG if memory pressure prevented debugfs file creationEd Cashin1-1/+0
If the system has trouble allocating memory for the creation of the aoe debugfs directory or of a file inside it, the debugfs member of an aoedev can be NULL. Do not treat a NULL debugfs pointer as a BUG on aoedev shutdown, avoiding the user impact of an unecessary panic. Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12aoe: suppress compiler warningsAndy Shevchenko1-4/+0
This patch fixes following compiler warnings: drivers/block/aoe/aoecmd.c: In function `aoecmd_ata_rw': drivers/block/aoe/aoecmd.c:383:17: warning: variable `t' set but not used [-Wunused-but-set-variable] struct aoetgt *t; ^ drivers/block/aoe/aoecmd.c: In function `resend': drivers/block/aoe/aoecmd.c:488:21: warning: variable `ah' set but not used [-Wunused-but-set-variable] struct aoe_atahdr *ah; ^ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ed Cashin <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12aoe: remove custom implementation of kbasename()Andy Shevchenko1-6/+3
In the kernel we have a nice helper that may be used here. This patch substitutes the custom implementation by the native function call. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ed Cashin <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12aoe: update internal version number to 85Ed Cashin1-1/+1
Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12aoe: update copyright dateEd Cashin1-1/+1
Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12aoe: fill in per-AoE-target information for debugfs fileEd Cashin1-1/+32
This information is presented in a compact format that has evolved for easy routine scanning by expert humans, mostly developers and support technicians helping to troubleshoot or test AoE-based systems. Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12aoe: provide file operations for debugfs filesEd Cashin1-1/+24
The place holder in the file contents is filled out in the following patch. Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12aoe: add AoE-target files to debugfsEd Cashin3-0/+38
Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12aoe: create and destroy debugfs directory for aoeEd Cashin1-1/+9
This series adds the debugging information that the coraid.com-distributed aoe driver exports via sysfs, but instead of sysfs, it uses debugfs. With these patches applied, even without AoE targets on the network, KEDR reports new possible memory leaks, but these are from callers outside the aoe driver that have used aoe_devnode to get the name of the character devices through the aoe_class->devnode callback, and I believe they're responsible for freeing that memory. This patch: Create and destroy the debugfs directory. Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12drivers/block/swim.c: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12cciss: set max scatter gather entries to 32 on P600Mike Miller1-0/+7
At one time we used to set the maximum number of scatter gather elements on all Smart Array controllers to 32. At some point in time the firmware began to write the "appropriate" value for each controller into the config table. The cciss driver would then read that and set h->maxsgentries. h->maxsgentries = readl(&(h->cfgtable->MaxSGElements); On the P600 that value is 544. Under some workloads a significant performance reduction may result. This patch forces the P600 to use only 32 scatter gather elements. Other controllers are not affected. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Dwight (Bud) Brown <bubrown@redhat.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Stephen M. Cameron <steve.cameron@hp.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12drivers/block/mg_disk.c: make mg_times_out() staticJingoo Han1-1/+1
mg_times_out() is used only in this file. Fix the following sparse warning: drivers/block/mg_disk.c:639:6: warning: symbol 'mg_times_out' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12block: replace strict_strtoul() with kstrtoul()Jingoo Han3-3/+3
The use of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-09Merge branch 'for-linus' of ↵Linus Torvalds1-17/+19
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph updates from Sage Weil: "This includes both the first pile of Ceph patches (which I sent to torvalds@vger, sigh) and a few new patches that add support for fscache for Ceph. That includes a few fscache core fixes that David Howells asked go through the Ceph tree. (Thanks go to Milosz Tanski for putting this feature together) This first batch of patches (included here) had (has) several important RBD bug fixes, hole punch support, several different cleanups in the page cache interactions, improvements in the truncate code (new truncate mutex to avoid shenanigans with i_mutex), and a series of fixes in the synchronous striping read/write code. On top of that is a random collection of small fixes all across the tree (error code checks and error path cleanup, obsolete wq flags, etc)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (43 commits) ceph: use d_invalidate() to invalidate aliases ceph: remove ceph_lookup_inode() ceph: trivial buildbot warnings fix ceph: Do not do invalidate if the filesystem is mounted nofsc ceph: page still marked private_2 ceph: ceph_readpage_to_fscache didn't check if marked ceph: clean PgPrivate2 on returning from readpages ceph: use fscache as a local presisent cache fscache: Netfs function for cleanup post readpages FS-Cache: Fix heading in documentation CacheFiles: Implement interface to check cache consistency FS-Cache: Add interface to check consistency of a cached object rbd: fix null dereference in dout rbd: fix buffer size for writes to images with snapshots libceph: use pg_num_mask instead of pgp_num_mask for pg.seed calc rbd: fix I/O error propagation for reads ceph: use vfs __set_page_dirty_nobuffers interface instead of doing it inside filesystem ceph: allow sync_read/write return partial successed size of read/write. ceph: fix bugs about handling short-read for sync read mode. ceph: remove useless variable revoked_rdcache ...
2013-09-08Merge git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds2-201/+408
Pull NVM Express driver update from Matthew Wilcox. * git://git.infradead.org/users/willy/linux-nvme: NVMe: Merge issue on character device bring-up NVMe: Handle ioremap failure NVMe: Add pci suspend/resume driver callbacks NVMe: Use normal shutdown NVMe: Separate controller init from disk discovery NVMe: Separate queue alloc/free from create/delete NVMe: Group pci related actions in functions NVMe: Disk stats for read/write commands only NVMe: Bring up cdev on set feature failure NVMe: Fix checkpatch issues NVMe: Namespace IDs are unsigned NVMe: Update nvme_id_power_state with latest spec NVMe: Split header file into user-visible and kernel-visible pieces NVMe: Call nvme_process_cq from submission path NVMe: Remove "process_cq did something" message NVMe: Return correct value from interrupt handler NVMe: Disk IO statistics NVMe: Restructure MSI / MSI-X setup NVMe: Use kzalloc instead of kmalloc+memset
2013-09-07NVMe: Merge issue on character device bring-upKeith Busch1-4/+8
A recent patch made it possible to bring up the character handle when the device is responsive but not accepting a set-features command. Another recent patch moved the initialization that requires we move where the checks for this condition occur. This patch merges these two ideas so it works much as before. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "The usual trivial updates all over the tree -- mostly typo fixes and documentation updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits) doc: Documentation/cputopology.txt fix typo treewide: Convert retrun typos to return Fix comment typo for init_cma_reserved_pageblock Documentation/trace: Correcting and extending tracepoint documentation mm/hotplug: fix a typo in Documentation/memory-hotplug.txt power: Documentation: Update s2ram link doc: fix a typo in Documentation/00-INDEX Documentation/printk-formats.txt: No casts needed for u64/s64 doc: Fix typo "is is" in Documentations treewide: Fix printks with 0x%# zram: doc fixes Documentation/kmemcheck: update kmemcheck documentation doc: documentation/hwspinlock.txt fix typo PM / Hibernate: add section for resume options doc: filesystems : Fix typo in Documentations/filesystems scsi/megaraid fixed several typos in comments ppc: init_32: Fix error typo "CONFIG_START_KERNEL" treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks page_isolation: Fix a comment typo in test_pages_isolated() doc: fix a typo about irq affinity ...
2013-09-04rbd: fix null dereference in doutJosh Durgin1-3/+5
The order parameter is sometimes NULL in _rbd_dev_v2_snap_size(), but the dout() always derefences it. Move this to another dout() protected by a check that order is non-NULL. Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <alex.elder@linaro.org>
2013-09-04rbd: fix buffer size for writes to images with snapshotsJosh Durgin1-5/+5
rbd_osd_req_create() needs to know the snapshot context size to create a buffer large enough to send it with the message front. It gets this from the img_request, which was not set for the obj_request yet. This resulted in trying to write past the end of the front payload, hitting this BUG: libceph: BUG_ON(p > msg->front.iov_base + msg->front.iov_len); Fix this by associating the obj_request with its img_request immediately after it's created, before the osd request is created. Fixes: http://tracker.ceph.com/issues/5760 Suggested-by: Alex Elder <alex.elder@linaro.org> Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <alex.elder@linaro.org>
2013-09-04rbd: fix I/O error propagation for readsJosh Durgin1-7/+7
When a request returns an error, the driver needs to report the entire extent of the request as completed. Writes already did this, since they always set xferred = length, but reads were skipping that step if an error other than -ENOENT occurred. Instead, rbd would end up passing 0 xferred to blk_end_request(), which would always report needing more data. This resulted in an assert failing when more data was required by the block layer, but all the object requests were done: [ 1868.719077] rbd: obj_request read result -108 xferred 0 [ 1868.719077] [ 1868.719518] end_request: I/O error, dev rbd1, sector 0 [ 1868.719739] [ 1868.719739] Assertion failure in rbd_img_obj_callback() at line 1736: [ 1868.719739] [ 1868.719739] rbd_assert(more ^ (which == img_request->obj_request_count)); Without this assert, reads that hit errors would hang forever, since the block layer considered them incomplete. Fixes: http://tracker.ceph.com/issues/5647 CC: stable@vger.kernel.org # v3.10 Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <alex.elder@linaro.org>
2013-09-04NVMe: Handle ioremap failureKeith Busch1-8/+22
Decrement the number of queues required for doorbell remapping until the memory is successfully mapped for that size. Additional checks are done so that we don't call free_irq if it has already been freed. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-09-04NVMe: Add pci suspend/resume driver callbacksKeith Busch1-15/+58
Used for going in and out of low power states. Resuming reuses the IO queues from the previous initialization, freeing any allocated queues that are no longer usable. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-09-04NVMe: Use normal shutdownKeith Busch1-0/+26
The NVMe spec recommends using the shutdown normal sequence when safely taking the controller offline instead of hitting CC.EN on the next start-up to reset the controller. The spec recommends a minimum of 1 second for the shutdown complete. This patch waits 2 seconds to be on the safe side. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-09-04NVMe: Separate controller init from disk discoveryKeith Busch1-30/+47
This combines the controller initialization into one function, removing IO queue setup from namespace discovery, and creates symetric functions for device removal. The controller start and shutdown functions can now be called from resume/suspend context as well as probe/remove. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-09-04NVMe: Separate queue alloc/free from create/deleteKeith Busch1-39/+94
This separates nvme queue allocation from creation, and queue deletion from freeing. This is so that we may in the future temporarily disable queues and reuse the same memory when bringing them back online, like coming back from suspend state. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-09-04NVMe: Group pci related actions in functionsKeith Busch1-46/+66
This will make it easier to reuse these outside probe/remove. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-09-04NVMe: Disk stats for read/write commands onlyKeith Busch1-3/+3
Flush and discard requests would previously mess up the accounting. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-09-04NVMe: Bring up cdev on set feature failureKeith Busch1-2/+2
This patch creates the character device as long as a device's admin queues are usable so a user has an opprotunity to perform administration tasks. A device may be in a state that does not allow IO and setting the queue count feature in such a state returns an error. Previously the driver would bail and the controller would be unusable. Signed-off-by: Keith Busch <keith.busch@intel.com>
2013-09-04NVMe: Fix checkpatch issuesKeith Busch1-5/+4
Signed-off-by: Keith Busch <keith.busch@intel.com>
2013-09-04NVMe: Namespace IDs are unsignedMatthew Wilcox1-2/+5
The 'Number of Namespaces' read from the device was being treated as signed, which would cause us to not scan any namespaces for a device with more than 2 billion namespaces. That led to noticing that the namespace ID was also being treated as signed, which could lead to the result from NVME_IOCTL_ID being treated as an error code. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-09-03Merge tag 'driver-core-3.12-rc1' of ↵Linus Torvalds1-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ...
2013-08-28rbd: convert bus code to use bus_groupsGreg Kroah-Hartman1-5/+9
The bus_attrs field of struct bus_type is going away soon, dev_groups should be used instead. This converts the RBD bus code to use the correct field. Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Acked-by: Alex Elder <elder@linaro.org> Cc: <ceph-devel@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacksJoe Perches1-1/+1
Don't emit OOM warnings when k.alloc calls fail when there there is a v.alloc immediately afterwards. Converted a kmalloc/vmalloc with memset to kzalloc/vzalloc. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-15Merge remote-tracking branch 'linus/master' into testingSage Weil28-682/+2164
2013-08-14aoe: adjust ref of head for compound page tailsEd Cashin1-10/+7
Fix a BUG which can trigger when direct-IO is used with AOE. As discussed previously, the fact that some users of the block layer provide bios that point to pages with a zero _count means that it is not OK for the network layer to do a put_page on the skb frags during an skb_linearize, so the aoe driver gets a reference to pages in bios and puts the reference before ending the bio. And because it cannot use get_page on a page with a zero _count, it manipulates the value directly. It is not OK to increment the _count of a compound page tail, though, since the VM layer will VM_BUG_ON a non-zero _count. Block users that do direct I/O can result in the aoe driver seeing compound page tails in bios. In that case, the same logic works as long as the head of the compound page is used instead of the tails. This patch handles compound pages and does not BUG. It relies on the block layer user leaving the relationship between the page tail and its head alone for the duration between the submission of the bio and its completion, whether successful or not. Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-10block: rbd: use NULL instead of 0Jingoo Han1-2/+2
The local variables such as 'bio_list', and 'pages' are pointers; thus, use NULL instead of 0 to fix the following sparse warnings. drivers/block/rbd.c:2166:32: warning: Using plain integer as NULL pointer drivers/block/rbd.c:2168:31: warning: Using plain integer as NULL pointer Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-07-23Merge branch 'for-3.11/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds16-624/+1915
Pull block IO driver bits from Jens Axboe: "As I mentioned in the core block pull request, due to real life circumstances the driver pull request would be late. Now it looks like -rc2 late... On the plus side, apart form the rsxx update, these are all things that I could argue could go in later in the cycle as they are fixes and not features. So even though things are late, it's not ALL bad. The pull request contains: - Updates to bcache, all bug fixes, from Kent. - A pile of drbd bug fixes (no big features this time!). - xen blk front/back fixes. - rsxx driver updates, some of them deferred form 3.10. So should be well cooked by now" * 'for-3.11/drivers' of git://git.kernel.dk/linux-block: (63 commits) bcache: Allocation kthread fixes bcache: Fix GC_SECTORS_USED() calculation bcache: Journal replay fix bcache: Shutdown fix bcache: Fix a sysfs splat on shutdown bcache: Advertise that flushes are supported bcache: check for allocation failures bcache: Fix a dumb race bcache: Use standard utility code bcache: Update email address bcache: Delete fuzz tester bcache: Document shrinker reserve better bcache: FUA fixes drbd: Allow online change of al-stripes and al-stripe-size drbd: Constants should be UPPERCASE drbd: Ignore the exit code of a fence-peer handler if it returns too late drbd: Fix rcu_read_lock balance on error path drbd: fix error return code in drbd_init() drbd: Do not sleep inside rcu bcache: Refresh usage docs ...
2013-07-10Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds1-2/+2
Pull microblaze update from Michal Simek: "This Microblaze merge window is quite minimal. I have also added to my branch one xilinx systemace sparse fix because haven't got any reply from block maintainer." * 'next' of git://git.monstr.eu/linux-2.6-microblaze: xilinx systemace: Fix sparse warnings microblaze: Move __NR_syscalls from uapi microblaze: Enable KGDB in defconfig microblaze: Don't mark arch_kgdb_ops as const.
2013-07-10xilinx systemace: Fix sparse warningsMichal Simek1-2/+2
Fix sysace sparse warnings. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-07-09Merge branch 'for-linus' of ↵Linus Torvalds1-84/+90
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph updates from Sage Weil: "There is some follow-on RBD cleanup after the last window's code drop, a series from Yan fixing multi-mds behavior in cephfs, and then a sprinkling of bug fixes all around. Some warnings, sleeping while atomic, a null dereference, and cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (36 commits) libceph: fix invalid unsigned->signed conversion for timespec encoding libceph: call r_unsafe_callback when unsafe reply is received ceph: fix race between cap issue and revoke ceph: fix cap revoke race ceph: fix pending vmtruncate race ceph: avoid accessing invalid memory libceph: Fix NULL pointer dereference in auth client code ceph: Reconstruct the func ceph_reserve_caps. ceph: Free mdsc if alloc mdsc->mdsmap failed. ceph: remove sb_start/end_write in ceph_aio_write. ceph: avoid meaningless calling ceph_caps_revoking if sync_mode == WB_SYNC_ALL. ceph: fix sleeping function called from invalid context. ceph: move inode to proper flushing list when auth MDS changes rbd: fix a couple warnings ceph: clear migrate seq when MDS restarts ceph: check migrate seq before changing auth cap ceph: fix race between page writeback and truncate ceph: reset iov_len when discarding cap release messages ceph: fix cap release race libceph: fix truncate size calculation ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 04:57:40 +0300