summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)AuthorFilesLines
2023-05-24nbd: fix incomplete validation of ioctl argZhong Jinghua1-0/+6
[ Upstream commit 55793ea54d77719a071b1ccc05a05056e3b5e009 ] We tested and found an alarm caused by nbd_ioctl arg without verification. The UBSAN warning calltrace like below: UBSAN: Undefined behaviour in fs/buffer.c:1709:35 signed integer overflow: -9223372036854775808 - 1 cannot be represented in type 'long long int' CPU: 3 PID: 2523 Comm: syz-executor.0 Not tainted 4.19.90 #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x170/0x1dc lib/dump_stack.c:118 ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161 handle_overflow+0x188/0x1dc lib/ubsan.c:192 __ubsan_handle_sub_overflow+0x34/0x44 lib/ubsan.c:206 __block_write_full_page+0x94c/0xa20 fs/buffer.c:1709 block_write_full_page+0x1f0/0x280 fs/buffer.c:2934 blkdev_writepage+0x34/0x40 fs/block_dev.c:607 __writepage+0x68/0xe8 mm/page-writeback.c:2305 write_cache_pages+0x44c/0xc70 mm/page-writeback.c:2240 generic_writepages+0xdc/0x148 mm/page-writeback.c:2329 blkdev_writepages+0x2c/0x38 fs/block_dev.c:2114 do_writepages+0xd4/0x250 mm/page-writeback.c:2344 The reason for triggering this warning is __block_write_full_page() -> i_size_read(inode) - 1 overflow. inode->i_size is assigned in __nbd_ioctl() -> nbd_set_size() -> bytesize. We think it is necessary to limit the size of arg to prevent errors. Moreover, __nbd_ioctl() -> nbd_add_socket(), arg will be cast to int. Assuming the value of arg is 0x80000000000000001) (on a 64-bit machine), it will become 1 after the coercion, which will return unexpected results. Fix it by adding checks to prevent passing in too large numbers. Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20230206145805.2645671-1-zhongjinghua@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24null_blk: Always check queue mode setting from configfsChaitanya Kulkarni1-0/+5
[ Upstream commit 63f8793ee60513a09f110ea460a6ff2c33811cdb ] Make sure to check device queue mode in the null_validate_conf() and return error for NULL_Q_RQ as we don't allow legacy I/O path, without this patch we get OOPs when queue mode is set to 1 from configfs, following are repro steps :- modprobe null_blk nr_devices=0 mkdir config/nullb/nullb0 echo 1 > config/nullb/nullb0/memory_backed echo 4096 > config/nullb/nullb0/blocksize echo 20480 > config/nullb/nullb0/size echo 1 > config/nullb/nullb0/queue_mode echo 1 > config/nullb/nullb0/power Entering kdb (current=0xffff88810acdd080, pid 2372) on processor 42 Oops: (null) due to oops @ 0xffffffffc041c329 CPU: 42 PID: 2372 Comm: sh Tainted: G O N 6.3.0-rc5lblk+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:null_add_dev.part.0+0xd9/0x720 [null_blk] Code: 01 00 00 85 d2 0f 85 a1 03 00 00 48 83 bb 08 01 00 00 00 0f 85 f7 03 00 00 80 bb 62 01 00 00 00 48 8b 75 20 0f 85 6d 02 00 00 <48> 89 6e 60 48 8b 75 20 bf 06 00 00 00 e8 f5 37 2c c1 48 8b 75 20 RSP: 0018:ffffc900052cbde0 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff88811084d800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888100042e00 RBP: ffff8881053d8200 R08: ffffc900052cbd68 R09: ffff888105db2000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000002 R13: ffff888104765200 R14: ffff88810eec1748 R15: ffff88810eec1740 FS: 00007fd445fd1740(0000) GS:ffff8897dfc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 0000000166a00000 CR4: 0000000000350ee0 DR0: ffffffff8437a488 DR1: ffffffff8437a489 DR2: ffffffff8437a48a DR3: ffffffff8437a48b DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> nullb_device_power_store+0xd1/0x120 [null_blk] configfs_write_iter+0xb4/0x120 vfs_write+0x2ba/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fd4460c57a7 Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffd3792a4a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd4460c57a7 RDX: 0000000000000002 RSI: 000055b43c02e4c0 RDI: 0000000000000001 RBP: 000055b43c02e4c0 R08: 000000000000000a R09: 00007fd44615b4e0 R10: 00007fd44615b3e0 R11: 0000000000000246 R12: 0000000000000002 R13: 00007fd446198520 R14: 0000000000000002 R15: 00007fd446198700 </TASK> Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com> Link: https://lore.kernel.org/r/20230416220339.43845-1-kch@nvidia.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11drbd: correctly submit flush bio on barrierChristoph Böhmwalder1-1/+1
commit 3899d94e3831ee07ea6821c032dc297aec80586a upstream. When we receive a flush command (or "barrier" in DRBD), we currently use a REQ_OP_FLUSH with the REQ_PREFLUSH flag set. The correct way to submit a flush bio is by using a REQ_OP_WRITE without any data, and set the REQ_PREFLUSH flag. Since commit b4a6bb3a67aa ("block: add a sanity check for non-write flush/fua bios"), this triggers a warning in the block layer, but this has been broken for quite some time before that. So use the correct set of flags to actually make the flush happen. Cc: Christoph Hellwig <hch@infradead.org> Cc: stable@vger.kernel.org Fixes: f9ff0da56437 ("drbd: allow parallel flushes for multi-volume resources") Reported-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230503121937.17232-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20block: ublk_drv: mark device as LIVE before adding diskMing Lei1-1/+2
[ Upstream commit 4985e7b2c002eb4c5c794a1d3acd91b82c89a0fd ] IO can be started before add_disk() returns, such as reading parititon table, then the monitor work should work for making forward progress. So mark device as LIVE before adding disk, meantime change to DEAD if add_disk() fails. Fixed: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230318141231.55562-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-13ublk: read any SQE values upfrontJens Axboe1-2/+20
commit 8c68ae3b22fa6fb2dbe83ef955ff10936503d28e upstream. Since SQE memory is shared with userspace, we should only be reading it once. We cannot read it multiple times, particularly when it's read once for validation and then read again for the actual use. ublk_ch_uring_cmd() is safe when called as a retry operation, as the memory backing is stable at that point. But for normal issue, we want to ensure that we only read ublksrv_io_cmd once. Wrap the function in a helper that reads the value into an on-stack copy of the struct. Cc: stable@vger.kernel.org # 6.0+ Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13block: ublk: make sure that block size is set correctlyMing Lei1-1/+3
[ Upstream commit 1d1665279a845d16c93687389e364386e3fe0f38 ] block size is one very key setting for block layer, and bad block size could panic kernel easily. Make sure that block size is set correctly. Meantime if ublk_validate_params() fails, clear ub->params so that disk is prevented from being added. Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Reported-and-tested-by: Breno Leitao <leitao@debian.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06block/io_uring: pass in issue_flags for uring_cmd task_work handlingJens Axboe1-13/+18
commit 9d2789ac9d60c049d26ef6d3005d9c94c5a559e9 upstream. io_uring_cmd_done() currently assumes that the uring_lock is held when invoked, and while it generally is, this is not guaranteed. Pass in the issue_flags associated with it, so that we have IO_URING_F_UNLOCKED available to be able to lock the CQ ring appropriately when completing events. Cc: stable@vger.kernel.org Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06loop: LOOP_CONFIGURE: send uevents for partitionsAlyssa Ross1-9/+9
[ Upstream commit bb430b69422640891b0b8db762885730579a4145 ] LOOP_CONFIGURE is, as far as I understand it, supposed to be a way to combine LOOP_SET_FD and LOOP_SET_STATUS64 into a single syscall. When using LOOP_SET_FD+LOOP_SET_STATUS64, a single uevent would be sent for each partition found on the loop device after the second ioctl(), but when using LOOP_CONFIGURE, no such uevent was being sent. In the old setup, uevents are disabled for LOOP_SET_FD, but not for LOOP_SET_STATUS64. This makes sense, as it prevents uevents being sent for a partially configured device during LOOP_SET_FD - they're only sent at the end of LOOP_SET_STATUS64. But for LOOP_CONFIGURE, uevents were disabled for the entire operation, so that final notification was never issued. To fix this, reduce the critical section to exclude the loop_reread_partitions() call, which causes the uevents to be issued, to after uevents are re-enabled, matching the behaviour of the LOOP_SET_FD+LOOP_SET_STATUS64 combination. I noticed this because Busybox's losetup program recently changed from using LOOP_SET_FD+LOOP_SET_STATUS64 to LOOP_CONFIGURE, and this broke my setup, for which I want a notification from the kernel any time a new partition becomes available. Signed-off-by: Alyssa Ross <hi@alyssa.is> [hch: reduced the critical section] Signed-off-by: Christoph Hellwig <hch@lst.de> Fixes: 3448914e8cc5 ("loop: Add LOOP_CONFIGURE ioctl") Link: https://lore.kernel.org/r/20230320125430.55367-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22block: sunvdc: add check for mdesc_grab() returning NULLLiang He1-0/+2
[ Upstream commit 6030363199e3a6341afb467ddddbed56640cbf6a ] In vdc_port_probe(), we should check the return value of mdesc_grab() as it may return NULL, which can cause potential NPD bug. Fixes: 43fdf27470b2 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.") Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20230315062032.1741692-1-windhl@126.com [axboe: style cleanup] Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22block: null_blk: Fix handling of fake timeout requestDamien Le Moal1-3/+3
[ Upstream commit 63f886597085f346276e3b3c8974de0100d65f32 ] When injecting a fake timeout into the null_blk driver using fail_io_timeout, the request timeout handler does not execute blk_mq_complete_request(), so the complete callback is never executed for a timedout request. The null_blk driver also has a driver-specific fake timeout mechanism which does not have this problem. Fix the problem with fail_io_timeout by using the same meachanism as null_blk internal timeout feature, using the fake_timeout field of null_blk commands. Reported-by: Akinobu Mita <akinobu.mita@gmail.com> Fixes: de3510e52b0a ("null_blk: fix command timeout completion handling") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20230314041106.19173-2-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22loop: Fix use-after-free issuesBart Van Assche1-8/+17
[ Upstream commit 9b0cb770f5d7b1ff40bea7ca385438ee94570eec ] do_req_filebacked() calls blk_mq_complete_request() synchronously or asynchronously when using asynchronous I/O unless memory allocation fails. Hence, modify loop_handle_cmd() such that it does not dereference 'cmd' nor 'rq' after do_req_filebacked() finished unless we are sure that the request has not yet been completed. This patch fixes the following kernel crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000054 Call trace: css_put.42938+0x1c/0x1ac loop_process_work+0xc8c/0xfd4 loop_rootcg_workfn+0x24/0x34 process_one_work+0x244/0x558 worker_thread+0x400/0x8fc kthread+0x16c/0x1e0 ret_from_fork+0x10/0x20 Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dan Schatzberg <schatzberg.dan@gmail.com> Fixes: c74d40e8b5e2 ("loop: charge i/o to mem and blk cg") Fixes: bc07c10a3603 ("block: loop: support DIO & AIO") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230314182155.80625-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11loop: loop_set_status_from_info() check before assignmentZhong Jinghua1-4/+4
[ Upstream commit 9f6ad5d533d1c71e51bdd06a5712c4fbc8768dfa ] In loop_set_status_from_info(), lo->lo_offset and lo->lo_sizelimit should be checked before reassignment, because if an overflow error occurs, the original correct value will be changed to the wrong value, and it will not be changed back. More, the original patch did not solve the problem, the value was set and ioctl returned an error, but the subsequent io used the value in the loop driver, which still caused an alarm: loop_handle_cmd do_req_filebacked loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset; lo_rw_aio cmd->iocb.ki_pos = pos Fixes: c490a0b5a4f3 ("loop: Check for overflow while configuring loop") Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20230221095027.3656193-1-zhongjinghua@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10brd: use radix_tree_maybe_preload instead of radix_tree_preloadPankaj Raghav1-1/+1
commit 0aa2988e4fd23c0c8b33999d7b47dfbc5e6bf24b upstream. Unconditionally calling radix_tree_preload_end() results in a OOPS message as the preload is only conditionally called for gfpflags_allow_blocking(). [ 20.267323] BUG: using smp_processor_id() in preemptible [00000000] code: fio/416 [ 20.267837] caller is brd_insert_page.part.0+0xbe/0x190 [brd] [ 20.269436] Call Trace: [ 20.269598] <TASK> [ 20.269742] dump_stack_lvl+0x32/0x50 [ 20.269982] check_preemption_disabled+0xd1/0xe0 [ 20.270289] brd_insert_page.part.0+0xbe/0x190 [brd] [ 20.270664] brd_submit_bio+0x33f/0xf40 [brd] Use radix_tree_maybe_preload() which does preload only if gfpflags_allow_blocking() is true but also takes the lock. Therefore, unconditionally calling radix_tree_preload_end() should not create any issues and the message disappears. Fixes: 6ded703c56c2 ("brd: check for REQ_NOWAIT and set correct page allocation mask") Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Link: https://lore.kernel.org/r/20230217121442.33914-1-p.raghav@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() failsIlya Dryomov1-11/+9
commit f7c4d9b133c7a04ca619355574e96b6abf209fba upstream. If getting an ID or setting up a work queue in rbd_dev_create() fails, use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts is triggered in do_rbd_add(). The root cause is that the ownership of these structures is transfered to rbd_dev prematurely and they all end up getting freed when rbd_dev_create() calls rbd_dev_free() prior to returning to do_rbd_add(). Found by Linux Verification Center (linuxtesting.org) with SVACE, an incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>. Cc: stable@vger.kernel.org Fixes: 1643dfa4c2c8 ("rbd: introduce a per-device ordered workqueue") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10brd: check for REQ_NOWAIT and set correct page allocation maskJens Axboe1-20/+28
commit 6ded703c56c21bfb259725d4f1831a5feb563e9b upstream. If REQ_NOWAIT is set, then do a non-blocking allocation if the operation is a write and we need to insert a new page. Currently REQ_NOWAIT cannot be set as the queue isn't marked as supporting nowait, this change is in preparation for allowing that. radix_tree_preload() warns on attempting to call it with an allocation mask that doesn't allow blocking. While that warning could arguably be removed, we need to handle radix insertion failures anyway as they are more likely if we cannot block to get memory. Remove legacy BUG_ON()'s and turn them into proper errors instead, one for the allocation failure and one for finding a page that doesn't match the correct index. Cc: stable@vger.kernel.org # 5.10+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10brd: return 0/-error from brd_insert_page()Jens Axboe1-14/+12
commit db0ccc44a20b4bb3039c0f6885a1f9c3323c7673 upstream. It currently returns a page, but callers just check for NULL/page to gauge success. Clean this up and return the appropriate error directly instead. Cc: stable@vger.kernel.org # 5.10+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10brd: mark as nowait compatibleJens Axboe1-0/+1
commit 67205f80be9910207481406c47f7d85e703fb2e9 upstream. By default, non-mq drivers do not support nowait. This causes io_uring to use a slower path as the driver cannot be trust not to block. brd can safely set the nowait flag, as worst case all it does is a NOIO allocation. For io_uring, this makes a substantial difference. Before: submitter=0, tid=453, file=/dev/ram0, node=-1 polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128 Engine=io_uring, sq_ring=128, cq_ring=128 IOPS=440.03K, BW=1718MiB/s, IOS/call=32/31 IOPS=428.96K, BW=1675MiB/s, IOS/call=32/32 IOPS=442.59K, BW=1728MiB/s, IOS/call=32/31 IOPS=419.65K, BW=1639MiB/s, IOS/call=32/32 IOPS=426.82K, BW=1667MiB/s, IOS/call=32/31 and after: submitter=0, tid=354, file=/dev/ram0, node=-1 polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128 Engine=io_uring, sq_ring=128, cq_ring=128 IOPS=3.37M, BW=13.15GiB/s, IOS/call=32/31 IOPS=3.45M, BW=13.46GiB/s, IOS/call=32/31 IOPS=3.43M, BW=13.42GiB/s, IOS/call=32/32 IOPS=3.43M, BW=13.39GiB/s, IOS/call=32/31 IOPS=3.43M, BW=13.38GiB/s, IOS/call=32/31 or about an 8x in difference. Now that brd is prepared to deal with REQ_NOWAIT reads/writes, mark it as supporting that. Cc: stable@vger.kernel.org # 5.10+ Link: https://lore.kernel.org/linux-block/20230203103005.31290-1-p.raghav@samsung.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10block: ublk: check IO buffer based on flag need_get_dataLiu Xiaodong1-4/+9
[ Upstream commit 2f1e07dda1e1310873647abc40bbc49eaf3b10e3 ] Currently, uring_cmd with UBLK_IO_FETCH_REQ or UBLK_IO_COMMIT_AND_FETCH_REQ is always checked whether userspace server has provided IO buffer even flag UBLK_F_NEED_GET_DATA is configured. This is a excessive check. If UBLK_F_NEED_GET_DATA is configured, FETCH_RQ doesn't need to provide IO buffer; COMMIT_AND_FETCH_REQ also doesn't need to do that if the IO type is not READ. Check ub_cmd->addr together with ublk_need_get_data() and IO type in ublk_ch_uring_cmd(). With this fix, userspace server doesn't need to preserve buffers for every ublk_io when flag UBLK_F_NEED_GET_DATA is configured, in order to save memory. Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com> Fixes: c86019ff75c1 ("ublk_drv: add support for UBLK_IO_NEED_GET_DATA") Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230210141356.112321-1-xiaodong.liu@intel.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ublk_drv: don't probe partitions if the ubq daemon isn't trustedMing Lei1-0/+9
[ Upstream commit 73a166d9749230d598320fdae3b687cdc0e2e205 ] If any ubq daemon is unprivileged, the ublk char device is allowed for unprivileged user actually, and we can't trust the current user, so not probe partitions. Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ublk_drv: remove nr_aborted_queues from ublk_deviceMing Lei1-1/+0
[ Upstream commit ed878d1c1c641c4a6bd366658fc8e6bc842b80d1 ] No one uses 'nr_aborted_queues' any more, so remove it. Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Stable-dep-of: 73a166d97492 ("ublk_drv: don't probe partitions if the ubq daemon isn't trusted") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-09block: ublk: extending queue_size to fix overflowLiu Xiaodong1-1/+1
[ Upstream commit 29baef789c838bd5c02f50c88adbbc6b955aaf61 ] When validating drafted SPDK ublk target, in a case that assigning large queue depth to multiqueue ublk device, ublk target would run into a weird incorrect state. During rounds of review and debug, An overflow bug was found in ublk driver. In ublk_cmd.h, UBLK_MAX_QUEUE_DEPTH is 4096 which means each ublk queue depth can be set as large as 4096. But when setting qd for a ublk device, sizeof(struct ublk_queue) + depth * sizeof(struct ublk_io) will be larger than 65535 if qd is larger than 2728. Then queue_size is overflowed, and ublk_get_queue() references a wrong pointer position. The wrong content of ublk_queue elements will lead to out-of-bounds memory access. Extend queue_size in ublk_device as "unsigned int". Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com> Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230131070552.115067-1-xiaodong.liu@intel.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-09use less confusing names for iov_iter direction initializersAl Viro4-13/+13
[ Upstream commit de4eda9de2d957ef2d6a8365a01e26a435e958cb ] READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Stable-dep-of: 6dd88fd59da8 ("vhost-scsi: unbreak any layout for response") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01block: ublk: move ublk_chr_class destroying after devices are removedMing Lei1-4/+3
[ Upstream commit 8e4ff684762b6503db45e8906e258faee080c336 ] The 'ublk_chr_class' is needed when deleting ublk char devices in ublk_exit(), so move it after devices(idle) are removed. Fixes the following warning reported by Harris, James R: [ 859.178950] sysfs group 'power' not found for kobject 'ublkc0' [ 859.178962] WARNING: CPU: 3 PID: 1109 at fs/sysfs/group.c:278 sysfs_remove_group+0x9c/0xb0 Reported-by: "Harris, James R" <james.r.harris@intel.com> Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Link: https://lore.kernel.org/linux-block/Y9JlFmSgDl3+zy3N@T590/T/#t Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Jim Harris <james.r.harris@intel.com> Link: https://lore.kernel.org/r/20230126115346.263344-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01block/rnbd-clt: fix wrong max ID in ida_alloc_maxGuoqing Jiang1-1/+1
[ Upstream commit 9d6033e350694a67885605674244d43c9559dc36 ] We need to pass 'end - 1' to ida_alloc_max after switch from ida_simple_get to ida_alloc_max. Otherwise smatch warns. drivers/block/rnbd/rnbd-clt.c:1460 init_dev() error: Calling ida_alloc_max() with a 'max' argument which is a power of 2. -1 missing? Fixes: 24afc15dbe21 ("block/rnbd: Remove a useless mutex") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Acked-by: Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20221230010926.32243-1-guoqing.jiang@linux.dev Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-24pktcdvd: check for NULL returna fter calling bio_split_to_limits()Jens Axboe1-0/+2
commit 3e9900f3bd7ba30d60f82b162b70a1dffe4e8e24 upstream. The revert of the removal of this driver happened after we fixed up the split limits for NOWAIT issue, hence it got missed. Ensure that we check for a NULL bio after splitting, in case it should be retried. Marking this as fixing both commits, so that stable backport will do this correctly. Cc: stable@vger.kernel.org Fixes: 9cea62b2cbab ("block: don't allow splitting of a REQ_NOWAIT bio") Fixes: 4b83e99ee709 ("Revert "pktcdvd: remove driver."") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18block: handle bio_split_to_limits() NULL returnJens Axboe2-0/+4
commit 613b14884b8595e20b9fac4126bf627313827fbe upstream. This can't happen right now, but in preparation for allowing bio_split_to_limits() returning NULL if it ended the bio, check for it in all the callers. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-12virtio_blk: Fix signedness bug in virtblk_prep_rq()Rafael Mendonca1-2/+4
[ Upstream commit a26116c1e74028914f281851488546c91cbae57d ] The virtblk_map_data() function returns negative error codes, however, the 'nents' field of vbr->sg_table is an unsigned int, which causes the error handling not to work correctly. Cc: stable@vger.kernel.org Fixes: 0e9911fa768f ("virtio-blk: support mq_ops->queue_rqs()") Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Message-Id: <20221021204126.927603-1-rafaelmendsr@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Suwan Kim <suwan.kim027@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-12virtio-blk: use a helper to handle request queuing errorsDmitry Fomichev1-13/+16
[ Upstream commit 258896fcc786b4e7db238eba26f6dd080e0ff41e ] Define a new helper function, virtblk_fail_to_queue(), to clean up the error handling code in virtio_queue_rq(). Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20221016034127.330942-2-dmitry.fomichev@wdc.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Stable-dep-of: a26116c1e740 ("virtio_blk: Fix signedness bug in virtblk_prep_rq()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-12ublk: honor IO_URING_F_NONBLOCK for handling control commandMing Lei1-0/+3
[ Upstream commit fa8e442e832a3647cdd90f3e606c473a51bc1b26 ] Most of control command handlers may sleep, so return -EAGAIN in case of IO_URING_F_NONBLOCK to defer the handling into io wq context. Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230104133235.836536-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31floppy: Fix memory leak in do_floppy_init()Yuan Can1-1/+3
commit f8ace2e304c5dd8a7328db9cd2b8a4b1b98d83ec upstream. A memory leak was reported when floppy_alloc_disk() failed in do_floppy_init(). unreferenced object 0xffff888115ed25a0 (size 8): comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s) hex dump (first 8 bytes): 00 ac 67 5b 81 88 ff ff ..g[.... backtrace: [<000000007f457abb>] __kmalloc_node+0x4c/0xc0 [<00000000a87bfa9e>] blk_mq_realloc_tag_set_tags.part.0+0x6f/0x180 [<000000006f02e8b1>] blk_mq_alloc_tag_set+0x573/0x1130 [<0000000066007fd7>] 0xffffffffc06b8b08 [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0 [<00000000e26d04ee>] do_init_module+0x1a4/0x680 [<000000001bb22407>] load_module+0x6249/0x7110 [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200 [<000000007bddca46>] do_syscall_64+0x35/0x80 [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 unreferenced object 0xffff88810fc30540 (size 32): comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007f457abb>] __kmalloc_node+0x4c/0xc0 [<000000006b91eab4>] blk_mq_alloc_tag_set+0x393/0x1130 [<0000000066007fd7>] 0xffffffffc06b8b08 [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0 [<00000000e26d04ee>] do_init_module+0x1a4/0x680 [<000000001bb22407>] load_module+0x6249/0x7110 [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200 [<000000007bddca46>] do_syscall_64+0x35/0x80 [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 If the floppy_alloc_disk() failed, disks of current drive will not be set, thus the lastest allocated set->tag cannot be freed in the error handling path. A simple call graph shown as below: floppy_module_init() floppy_init() do_floppy_init() for (drive = 0; drive < N_DRIVE; drive++) blk_mq_alloc_tag_set() blk_mq_alloc_tag_set_tags() blk_mq_realloc_tag_set_tags() # set->tag allocated floppy_alloc_disk() blk_mq_alloc_disk() # error occurred, disks failed to allocated ->out_put_disk: for (drive = 0; drive < N_DRIVE; drive++) if (!disks[drive][0]) # the last disks is not set and loop break break; blk_mq_free_tag_set() # the latest allocated set->tag leaked Fix this problem by free the set->tag of current drive before jump to error handling path. Cc: stable@vger.kernel.org Fixes: 302cfee15029 ("floppy: use a separate gendisk for each media format") Signed-off-by: Yuan Can <yuancan@huawei.com> [efremov: added stable list, changed title] Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31loop: Fix the max_loop commandline argument treatment when it is set to 0Isaac J. Manjarres1-16/+12
commit 85c50197716c60fe57f411339c579462e563ac57 upstream. Currently, the max_loop commandline argument can be used to specify how many loop block devices are created at init time. If it is not specified on the commandline, CONFIG_BLK_DEV_LOOP_MIN_COUNT loop block devices will be created. The max_loop commandline argument can be used to override the value of CONFIG_BLK_DEV_LOOP_MIN_COUNT. However, when max_loop is set to 0 through the commandline, the current logic treats it as if it had not been set, and creates CONFIG_BLK_DEV_LOOP_MIN_COUNT devices anyway. Fix this by starting max_loop off as set to CONFIG_BLK_DEV_LOOP_MIN_COUNT. This preserves the intended behavior of creating CONFIG_BLK_DEV_LOOP_MIN_COUNT loop block devices if the max_loop commandline parameter is not specified, and allowing max_loop to be respected for all values, including 0. This allows environments that can create all of their required loop block devices on demand to not have to unnecessarily preallocate loop block devices. Fixes: 732850827450 ("remove artificial software max_loop limit") Cc: stable@vger.kernel.org Cc: Ken Chen <kenchen@google.com> Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com> Link: https://lore.kernel.org/r/20221208212902.765781-1-isaacmanjarres@google.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31drbd: destroy workqueue when drbd device was freedWang ShaoBo1-1/+5
[ Upstream commit 8692814b77ca4228a99da8a005de0acf40af6132 ] A submitter workqueue is dynamically allocated by init_submitter() called by drbd_create_device(), we should destroy it when this device is not needed or destroyed. Fixes: 113fef9e20e0 ("drbd: prepare to queue write requests on a submit worker") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lore.kernel.org/r/20221124015817.2729789-3-bobo.shaobowang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31drbd: remove call to memset before free device/resource/connectionWang ShaoBo1-3/+0
[ Upstream commit 6e7b854e4c1b02dba00760dfa79d8dbf6cce561e ] This revert c2258ffc56f2 ("drbd: poison free'd device, resource and connection structs"), add memset is odd here for debugging, there are some methods to accurately show what happened, such as kdump. Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lore.kernel.org/r/20221124015817.2729789-2-bobo.shaobowang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Stable-dep-of: 8692814b77ca ("drbd: destroy workqueue when drbd device was freed") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31drbd: use blk_queue_max_discard_sectors helperChristoph Böhmwalder1-5/+5
[ Upstream commit 258bea6388ac93f34561fd91064232d14e174bff ] We currently only set q->limits.max_discard_sectors, but that is not enough. Another field, max_hw_discard_sectors, was introduced in commit 0034af036554 ("block: make /sys/block/<dev>/queue/discard_max_bytes writeable"). The difference is that max_discard_sectors can be changed from user space via sysfs, while max_hw_discard_sectors is the "hardware" upper limit. So use this helper, which sets both. This is also a fixup for commit 998e9cbcd615 ("drbd: cleanup decide_on_discard_support"): if discards are not supported, that does not necessarily mean we also want to disable write_zeroes. Fixes: 998e9cbcd615 ("drbd: cleanup decide_on_discard_support") Reviewed-by: Joel Colledge <joel.colledge@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20221109133453.51652-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-26Merge tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linuxLinus Torvalds1-44/+38
Pull block fixes from Jens Axboe: - A few fixes for s390 sads (Stefan, Colin) - Ensure that ublk doesn't reorder requests, as that can be problematic on devices that need specific ordering (Ming) - Fix a queue reference leak in disk allocation handling (Christoph) * tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux: ublk_drv: don't forward io commands in reserve order s390/dasd: fix possible buffer overflow in copy_pair_show s390/dasd: fix no record found for raw_track_access s390/dasd: increase printing of debug data payload s390/dasd: Fix spelling mistake "Ivalid" -> "Invalid" blk-mq: fix queue reference leak on blk_mq_alloc_disk_for_queue failure
2022-11-24ublk_drv: don't forward io commands in reserve orderMing Lei1-44/+38
Either ublk_can_use_task_work() is true or not, io commands are forwarded to ublk server in reverse order, since llist_add() is always to add one element to the head of the list. Even though block layer doesn't guarantee request dispatch order, requests should be sent to hardware in the sequence order generated from io scheduler, which usually considers the request's LBA, and order is often important for HDD. So forward io commands in the sequence made from io scheduler by aligning task work with current io_uring command's batch handling, and it has been observed that both can get similar performance data if IORING_SETUP_COOP_TASKRUN is set from ublk server. Reported-by: Andreas Hindborg <andreas.hindborg@wdc.com> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221121155645.396272-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-19Merge tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linuxLinus Torvalds1-2/+2
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - Two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira) - Memory leak fix in nvmet (Sagi Grimberg) - Regression fix for block cgroups pinning the wrong blkcg, causing leaks of cgroups and blkcgs (Chris) - UAF fix for drbd setup error handling (Dan) - Fix DMA alignment propagation in DM (Keith) * tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux: dm-log-writes: set dma_alignment limit in io_hints dm-integrity: set dma_alignment limit in io_hints block: make blk_set_default_limits() private dm-crypt: provide dma_alignment limit in io_hints block: make dma_alignment a stacking queue_limit nvmet: fix a memory leak in nvmet_auth_set_key nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000 drbd: use after free in drbd_create_device() nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro blk-cgroup: properly pin the parent in blkcg_css_online
2022-11-15drbd: use after free in drbd_create_device()Dan Carpenter1-2/+2
The drbd_destroy_connection() frees the "connection" so use the _safe() iterator to prevent a use after free. Fixes: b6f85ef9538b ("drbd: Iterate over all connections") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/Y3Jd5iZRbNQ9w6gm@kili Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-05Merge tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linuxLinus Torvalds2-47/+74
Pull block fixes from Jens Axboe: - Fixes for the ublk driver (Ming) - Fixes for error handling memory leaks (Chen Jun, Chen Zhongjin) - Explicitly clear the last request in a chain when the plug is flushed, as it may have already been issued (Al) * tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux: block: blk_add_rq_to_plug(): clear stale 'last' after flush blk-mq: Fix kmemleak in blk_mq_init_allocated_queue block: Fix possible memory leak for rq_wb on add_disk failure ublk_drv: add ublk_queue_cmd() for cleanup ublk_drv: avoid to touch io_uring cmd in blk_mq io path ublk_drv: comment on ublk_driver entry of Kconfig ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of module
2022-10-31ublk_drv: add ublk_queue_cmd() for cleanupMing Lei1-26/+21
Add helper of ublk_queue_cmd() so that both ublk_queue_rq() and ublk_handle_need_get_data() can reuse this helper. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221029010432.598367-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-31ublk_drv: avoid to touch io_uring cmd in blk_mq io pathMing Lei1-30/+53
io_uring cmd is supposed to be used in ubq daemon context mainly, and we should try to avoid to touch it in ublk io submission context, otherwise this data could become shared between the two contexts, and performance is hurt. So link request into one per-queue list, and use same batching policy of io_uring command, just avoid to touch ucmd in blk-mq io context. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221029010432.598367-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-31ublk_drv: comment on ublk_driver entry of KconfigMing Lei1-0/+6
Add help info for choosing to build ublk_drv as module or builtin. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221029010432.598367-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-31ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of moduleMing Lei1-0/+3
UBLK_F_URING_CMD_COMP_IN_TASK needs to be set and returned to userspace if ublk driver is built as module, otherwise userspace may get wrong flags shown. Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221029010432.598367-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-30Merge tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linuxLinus Torvalds1-1/+3
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - make the multipath dma alignment match the non-multipath one (Keith Busch) - fix a bogus use of sg_init_marker() (Nam Cao) - fix circulr locking in nvme-tcp (Sagi Grimberg) - Initialization fix for requests allocated via the special hw queue allocator (John) - Fix for a regression added in this release with the batched completions of end_io backed requests (Ming) - Error handling leak fix for rbd (Yang) - Error handling leak fix for add_disk() failure (Yu) * tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux: blk-mq: Properly init requests from blk_mq_alloc_request_hctx() blk-mq: don't add non-pt request with ->end_io to batch rbd: fix possible memory leak in rbd_sysfs_init() nvme-multipath: set queue dma alignment to 3 nvme-tcp: fix possible circular locking when deleting a controller under memory pressure nvme-tcp: replace sg_init_marker() with sg_init_table() block: fix memory leak for elevator on add_disk failure
2022-10-27rbd: fix possible memory leak in rbd_sysfs_init()Yang Yingliang1-1/+3
If device_register() returns error in rbd_sysfs_init(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. As comment of device_add() says, it should call put_device() to drop the reference count that was set in device_initialize() when it fails, so the name can be freed in kobject_cleanup(). Fault injection test can trigger this problem: unreferenced object 0xffff88810173aa78 (size 8): comm "modprobe", pid 247, jiffies 4294714278 (age 31.789s) hex dump (first 8 bytes): 72 62 64 00 81 88 ff ff rbd..... backtrace: [<00000000f58fae56>] __kmalloc_node_track_caller+0x44/0x1b0 [<00000000bdd44fe7>] kstrdup+0x3a/0x70 [<00000000f7844d0b>] kstrdup_const+0x63/0x80 [<000000001b0a0eeb>] kvasprintf_const+0x10b/0x190 [<00000000a47bd894>] kobject_set_name_vargs+0x56/0x150 [<00000000d5edbf18>] dev_set_name+0xab/0xe0 [<00000000f5153e80>] device_add+0x106/0x1f20 Fixes: dfc5606dc513 ("rbd: replace the rbd sysfs interface") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20221027091918.2294132-1-yangyingliang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-22Merge tag 'block-6.1-2022-10-20' of git://git.kernel.dk/linuxLinus Torvalds2-9/+7
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - fix nvme-hwmon for DMA non-cohehrent architectures (Serge Semin) - add a nvme-hwmong maintainer (Christoph Hellwig) - fix error pointer dereference in error handling (Dan Carpenter) - fix invalid memory reference in nvmet_subsys_attr_qid_max_show (Daniel Wagner) - don't limit the DMA segment size in nvme-apple (Russell King) - fix workqueue MEM_RECLAIM flushing dependency (Sagi Grimberg) - disable write zeroes on various Kingston SSDs (Xander Li) - fix a memory leak with block device tracing (Ye) - flexible-array fix for ublk (Yushan) - document the ublk recovery feature from this merge window (ZiyangZhang) - remove dead bfq variable in struct (Yuwei) - error handling rq clearing fix (Yu) - add an IRQ safety check for the cached bio freeing (Pavel) - drbd bio cloning fix (Christoph) * tag 'block-6.1-2022-10-20' of git://git.kernel.dk/linux: blktrace: remove unnessary stop block trace in 'blk_trace_shutdown' blktrace: fix possible memleak in '__blk_trace_remove' blktrace: introduce 'blk_trace_{start,stop}' helper bio: safeguard REQ_ALLOC_CACHE bio put block, bfq: remove unused variable for bfq_queue drbd: only clone bio if we have a backing device ublk_drv: use flexible-array member instead of zero-length array nvmet: fix invalid memory reference in nvmet_subsys_attr_qid_max_show nvmet: fix workqueue MEM_RECLAIM flushing dependency nvme-hwmon: kmalloc the NVME SMART log buffer nvme-hwmon: consistently ignore errors from nvme_hwmon_init nvme: add Guenther as nvme-hwmon maintainer nvme-apple: don't limit DMA segement size nvme-pci: disable write zeroes on various Kingston SSD nvme: fix error pointer dereference in error handling Documentation: document ublk user recovery feature blk-mq: fix null pointer dereference in blk_mq_clear_rq_mapping()
2022-10-20drbd: only clone bio if we have a backing deviceChristoph Böhmwalder1-8/+6
Commit c347a787e34cb (drbd: set ->bi_bdev in drbd_req_new) moved a bio_set_dev call (which has since been removed) to "earlier", from drbd_request_prepare to drbd_req_new. The problem is that this accesses device->ldev->backing_bdev, which is not NULL-checked at this point. When we don't have an ldev (i.e. when the DRBD device is diskless), this leads to a null pointer deref. So, only allocate the private_bio if we actually have a disk. This is also a small optimization, since we don't clone the bio to only to immediately free it again in the diskless case. Fixes: c347a787e34cb ("drbd: set ->bi_bdev in drbd_req_new") Co-developed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Co-developed-by: Joel Colledge <joel.colledge@linbit.com> Signed-off-by: Joel Colledge <joel.colledge@linbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221020085205.129090-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-20ublk_drv: use flexible-array member instead of zero-length arrayYushan Zhou1-1/+1
Eliminate the following coccicheck warning: ./drivers/block/ublk_drv.c:127:16-19: WARNING use flexible-array member instead Signed-off-by: Yushan Zhou <katrinzhou@tencent.com> Link: https://lore.kernel.org/r/20221018100132.355393-1-zys.zljxml@gmail.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-17Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
2022-10-14Merge tag 'mm-stable-2022-10-13' of ↵Linus Torvalds1-23/+3
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more MM updates from Andrew Morton: - fix a race which causes page refcounting errors in ZONE_DEVICE pages (Alistair Popple) - fix userfaultfd test harness instability (Peter Xu) - various other patches in MM, mainly fixes * tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (29 commits) highmem: fix kmap_to_page() for kmap_local_page() addresses mm/page_alloc: fix incorrect PGFREE and PGALLOC for high-order page mm/selftest: uffd: explain the write missing fault check mm/hugetlb: use hugetlb_pte_stable in migration race check mm/hugetlb: fix race condition of uffd missing/minor handling zram: always expose rw_page LoongArch: update local TLB if PTE entry exists mm: use update_mmu_tlb() on the second thread kasan: fix array-bounds warnings in tests hmm-tests: add test for migrate_device_range() nouveau/dmem: evict device private memory during release nouveau/dmem: refactor nouveau_dmem_fault_copy_one() mm/migrate_device.c: add migrate_device_range() mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page() mm/memremap.c: take a pgmap reference on page allocation mm: free device private pages have zero refcount mm/memory.c: fix race when faulting a device private page mm/damon: use damon_sz_region() in appropriate place mm/damon: move sz_damon_region to damon_sz_region lib/test_meminit: add checks for the allocation functions ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-13 12:19:56 +0300