| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new power capping facility allowing aggregate power
constraints to be applied to sets of devices in a distributed manner,
add a new CPU ID to the RAPL power capping driver and improve it, drop
a cpufreq driver belonging to a platform that is not supported any
more, drop two redundant cpufreq driver flags, update cpufreq drivers
(intel_pstate, brcmstb-avs, qcom-hw), update the operating performance
points (OPP) framework (code cleanups, new helpers, devfreq-related
modifications), clean up devfreq, extend the PM clock layer, update
the cpupower utility and make assorted janitorial changes.
Specifics:
- Add new power capping facility called DTPM (Dynamic Thermal Power
Management), based on the existing power capping framework, to
allow aggregate power constraints to be applied to sets of devices
in a distributed manner, along with a CPU backend driver based on
the Energy Model (Daniel Lezcano, Dan Carpenter, Colin Ian King).
- Add AlderLake Mobile support to the Intel RAPL power capping driver
and make it use the topology interface when laying out the system
topology (Zhang Rui, Yunfeng Ye).
- Drop the cpufreq tango driver belonging to a platform that is not
supported any more (Arnd Bergmann).
- Drop the redundant CPUFREQ_STICKY and CPUFREQ_PM_NO_WARN cpufreq
driver flags (Viresh Kumar).
- Update cpufreq drivers:
* Fix max CPU frequency discovery in the intel_pstate driver and
make janitorial changes in it (Chen Yu, Rafael Wysocki, Nigel
Christian).
* Fix resource leaks in the brcmstb-avs-cpufreq driver (Christophe
JAILLET).
* Make the tegra20 driver use the resource-managed API (Dmitry
Osipenko).
* Enable boost support in the qcom-hw driver (Shawn Guo).
- Update the operating performance points (OPP) framework:
* Clean up the OPP core (Dmitry Osipenko, Viresh Kumar).
* Extend the OPP API by adding new helpers to it (Dmitry Osipenko,
Viresh Kumar).
* Allow required OPPs to be used for devfreq devices and update
the devfreq governor code accordingly (Saravana Kannan).
* Prepare the framework for introducing new dev_pm_opp_set_opp()
helper (Viresh Kumar).
* Drop dev_pm_opp_set_bw() and update related drivers (Viresh
Kumar).
* Allow lazy linking of required-OPPs (Viresh Kumar).
- Simplify and clean up devfreq somewhat (Lukasz Luba, Yang Li,
Pierre Kuo).
- Update the generic power domains (genpd) framework:
* Use device's next wakeup to determine domain idle state (Lina
Iyer).
* Improve initialization and debug (Dmitry Osipenko).
* Simplify computations (Abaci Team).
- Make janitorial changes in the core code handling system sleep and
PM-runtime (Bhaskar Chowdhury, Bjorn Helgaas, Rikard Falkeborn,
Zqiang).
- Update the MAINTAINERS entry for the exynos cpuidle driver and drop
DEBUG definition from intel_idle (Krzysztof Kozlowski, Tom Rix).
- Extend the PM clock layer to cover clocks that must sleep (Nicolas
Pitre).
- Update the cpupower utility:
* Update cpupower command, add support for AMD family 0x19 and
clean up the code to remove many of the family checks to make
future family updates easier (Nathan Fontenot, Robert Richter).
* Add Makefile dependencies for install targets to allow building
cpupower in parallel rather than serially (Ivan Babrou).
- Make janitorial changes in power management Kconfig (Lukasz Luba)"
* tag 'pm-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits)
MAINTAINERS: cpuidle: exynos: include header in file pattern
powercap: intel_rapl: Use topology interface in rapl_init_domains()
powercap: intel_rapl: Use topology interface in rapl_add_package()
PM: sleep: Constify static struct attribute_group
PM: Kconfig: remove unneeded "default n" options
PM: EM: update Kconfig description and drop "default n" option
cpufreq: Remove unused flag CPUFREQ_PM_NO_WARN
cpufreq: Remove CPUFREQ_STICKY flag
PM / devfreq: Add required OPPs support to passive governor
PM / devfreq: Cache OPP table reference in devfreq
OPP: Add function to look up required OPP's for a given OPP
PM / devfreq: rk3399_dmc: Remove unneeded semicolon
opp: Replace ENOTSUPP with EOPNOTSUPP
opp: Fix "foo * bar" should be "foo *bar"
opp: Don't ignore clk_get() errors other than -ENOENT
opp: Update bandwidth requirements based on scaling up/down
opp: Allow lazy-linking of required-opps
opp: Remove dev_pm_opp_set_bw()
devfreq: tegra30: Migrate to dev_pm_opp_set_opp()
drm: msm: Migrate to dev_pm_opp_set_opp()
...
|
|
This reverts commit e590474768f1cc04852190b61dec692411b22e2a.
While things are _almost_ there and working for almost all systems,
there are still reported regressions happening, so let's revert this
default for 5.12. We can bring it back in linux-next after 5.12-rc1 is
out to get more testing and hopefully solve the remaining different
subsystem and driver issues that people are running into.
Cc: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210219074549.1506936-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix build warnings in the arch_numa common code:
../include/linux/kern_levels.h:5:18: warning: format '%Lx' expects argument of type 'long long unsigned int', but argument 3 has type 'phys_addr_t' {aka 'unsigned int'} [-Wformat=]
../drivers/base/arch_numa.c:360:56: note: format string is defined here
360 | pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
../drivers/base/arch_numa.c:435:39: note: format string is defined here
435 | pr_info("Faking a node at [mem %#018Lx-%#018Lx]\n", start, end - 1);
Fixes: ae3c107cd8be ("numa: Move numa implementation to common code")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.12
Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
|
|
* pm-sleep:
PM: sleep: Constify static struct attribute_group
PM: sleep: Use dev_printk() when possible
PM: sleep: No need to check PF_WQ_WORKER in thaw_kernel_threads()
* pm-core:
PM: runtime: Fix typos and grammar
PM: runtime: Fix resposible -> responsible in runtime.c
* pm-domains:
PM: domains: Simplify the calculation of variables
PM: domains: Add "performance" column to debug summary
PM: domains: Make of_genpd_add_subdomain() return -EPROBE_DEFER
PM: domains: Make set_performance_state() callback optional
PM: domains: use device's next wakeup to determine domain idle state
PM: domains: inform PM domain of a device's next wakeup
* pm-clk:
PM: clk: make PM clock layer compatible with clocks that must sleep
|
|
Lift the dma_default_coherent variable from the mips architecture code
to the driver core. This allows an architecture to sdefault all device
to be DMA coherent at run time, even if the kernel is build with support
for DMA noncoherent device. By allowing device_initialize to set the
->dma_coherent field to this default the amount of arch hooks required
for this behavior can be greatly reduced.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
of_device_node_put() is just a wrapper for of_node_put(). The platform
driver core is already polluted with of_node pointers and the only 'get'
already uses of_node_get() (though typically the get would happen in
of_device_alloc()).
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210211232745.1498137-3-robh@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire second update for 5.12-rc1
Some late changes for sdw:
- fix for crash on intel driver
- support for _no_pm IO calls in sdw regmap
* tag 'soundwire-2_5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
|
|
When the auxiliary device code is built into the kernel, it can be executed
before the auxiliary bus is registered. This causes bus->p to be not
allocated and triggers a NULL pointer dereference when the auxiliary bus
device gets added with bus_add_device(). Call the auxiliary_bus_init()
under driver_init() so the bus is initialized before devices.
Below is the kernel splat for the bug:
[ 1.948215] BUG: kernel NULL pointer dereference, address: 0000000000000060
[ 1.950670] #PF: supervisor read access in kernel mode
[ 1.950670] #PF: error_code(0x0000) - not-present page
[ 1.950670] PGD 0
[ 1.950670] Oops: 0000 1 SMP NOPTI
[ 1.950670] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-intel-nextsvmtest+ #2205
[ 1.950670] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1.950670] RIP: 0010:bus_add_device+0x64/0x140
[ 1.950670] Code: 00 49 8b 75 20 48 89 df e8 59 a1 ff ff 41 89 c4 85 c0 75 7b 48 8b 53 50 48 85 d2 75 03 48 8b 13 49 8b 85 a0 00 00 00 48 89 de <48> 8
78 60 48 83 c7 18 e8 ef d9 a9 ff 41 89 c4 85 c0 75 45 48 8b
[ 1.950670] RSP: 0000:ff46032ac001baf8 EFLAGS: 00010246
[ 1.950670] RAX: 0000000000000000 RBX: ff4597f7414aa680 RCX: 0000000000000000
[ 1.950670] RDX: ff4597f74142bbc0 RSI: ff4597f7414aa680 RDI: ff4597f7414aa680
[ 1.950670] RBP: ff46032ac001bb10 R08: 0000000000000044 R09: 0000000000000228
[ 1.950670] R10: ff4597f741141b30 R11: ff4597f740182a90 R12: 0000000000000000
[ 1.950670] R13: ffffffffa5e936c0 R14: 0000000000000000 R15: 0000000000000000
[ 1.950670] FS: 0000000000000000(0000) GS:ff4597f7bba00000(0000) knlGS:0000000000000000
[ 1.950670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.950670] CR2: 0000000000000060 CR3: 000000002140c001 CR4: 0000000000f71ef0
[ 1.950670] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1.950670] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 1.950670] PKRU: 55555554
[ 1.950670] Call Trace:
[ 1.950670] device_add+0x3ee/0x850
[ 1.950670] __auxiliary_device_add+0x47/0x60
[ 1.950670] idxd_pci_probe+0xf77/0x1180
[ 1.950670] local_pci_probe+0x4a/0x90
[ 1.950670] pci_device_probe+0xff/0x1b0
[ 1.950670] really_probe+0x1cf/0x440
[ 1.950670] ? rdinit_setup+0x31/0x31
[ 1.950670] driver_probe_device+0xe8/0x150
[ 1.950670] device_driver_attach+0x58/0x60
[ 1.950670] __driver_attach+0x8f/0x150
[ 1.950670] ? device_driver_attach+0x60/0x60
[ 1.950670] ? device_driver_attach+0x60/0x60
[ 1.950670] bus_for_each_dev+0x79/0xc0
[ 1.950670] ? kmem_cache_alloc_trace+0x323/0x430
[ 1.950670] driver_attach+0x1e/0x20
[ 1.950670] bus_add_driver+0x154/0x1f0
[ 1.950670] driver_register+0x70/0xc0
[ 1.950670] __pci_register_driver+0x54/0x60
[ 1.950670] idxd_init_module+0xe2/0xfc
[ 1.950670] ? idma64_platform_driver_init+0x19/0x19
[ 1.950670] do_one_initcall+0x4a/0x1e0
[ 1.950670] kernel_init_freeable+0x1fc/0x25c
[ 1.950670] ? rest_init+0xba/0xba
[ 1.950670] kernel_init+0xe/0x116
[ 1.950670] ret_from_fork+0x1f/0x30
[ 1.950670] Modules linked in:
[ 1.950670] CR2: 0000000000000060
[ 1.950670] --[ end trace cd7d1b226d3ca901 ]--
Fixes: 7de3697e9cbd ("Add auxiliary bus support")
Reported-by: Jacob Pan <jacob.jun.pan@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210210201611.1611074-1-dave.jiang@intel.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
"GPL v2" is the same as "GPL". It exists for historic reasons.
See Documentation/process/license-rules.rst
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210122070634.12825-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use no_pm versions for write and read.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210122070634.12825-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
sdw_update_slave_status will be invoked when a codec is attached,
and the codec driver will initialize the codec with regmap functions
while the codec device is pm_runtime suspended.
regmap routines currently rely on regular SoundWire IO functions,
which will call pm_runtime_get_sync()/put_autosuspend.
This causes a deadlock where the resume routine waits for an
initialization complete signal that while the initialization complete
can only be reached when the resume completes.
The only solution if we allow regmap functions to be used in resume
operations as well as during codec initialization is to use _no_pm
routines. The duty of making sure the bus is operational needs to be
handled above the regmap level.
Fixes: 7c22ce6e21840 ('regmap: Add SoundWire bus support')
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210122070634.12825-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This allows fw_devlink to recognize power domain drivers that don't use
the device-driver model to initialize the device. fw_devlink will use
this information to make sure consumers of such power domain aren't
indefinitely blocked from probing, waiting for the power domain device
to appear and bind to a driver.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210205222644.2357303-8-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Device links only work between devices that use the driver core to match
and bind a driver to a device. So, add an API for frameworks to let the
driver core know that a fwnode has been initialized by a driver without
using the driver core.
Then use this information to make sure that fw_devlink doesn't make the
consumers wait indefinitely on suppliers that'll never bind to a driver.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210205222644.2357303-6-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This param allows forcing all dependencies to be treated as mandatory.
This will be useful for boards in which all optional dependencies like
IOMMUs and DMAs need to be treated as mandatory dependencies.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210205222644.2357303-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During the initial parsing of firmware by fw_devlink, fw_devlink might
infer that some supplier firmware nodes would get populated as devices.
But the inference is not always correct. This patch tries to logically
detect and fix such mistakes as boot progresses or more devices probe.
fw_devlink makes a fundamental assumption that once a device binds to a
driver, it will populate (i.e: add as struct devices) all the child
firmware nodes that could be populated as devices (if they aren't
populated already).
So, whenever a device probes, we check all its child firmware nodes. If
a child firmware node has a corresponding device populated, we don't
modify the child node or its descendants. However, if a child firmware
node has not been populated as a device, we delete all the fwnode links
where the child node or its descendants are suppliers. This ensures that
no other device is blocked on a firmware node that will never be
populated as a device. We also mark such fwnodes as NOT_DEVICE, so that
no new fwnode links are created with these nodes as suppliers.
Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210205222644.2357303-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver core ignores the return value of a bus' remove callback. However
a driver returning an error code is a hint that there is a problem,
probably a driver author who expects that returning e.g. -EBUSY has any
effect.
The right thing to do would be to make struct platform_driver::remove()
return void. With the immense number of platform drivers this is however a
big quest and I hope to prevent at least a few new drivers that return an
error code here.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210207211537.19992-1-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
At the moment the function device_del() is calling
device_remove_properties() unconditionally. That will result into the
reference count of the software node attached to the device being
decremented, and in most cases it will hit 0 at that point. So in
practice device_del() will unregister the software node attached to
the device, even if that was not the intention of the caller. Right
now software nodes can not be reused or shared because of that.
So device_del() can not unregister the software nodes unconditionally
like that. Unfortunately some of the users of device_add_properties()
are now relying on this behaviour. Because of that, and also in
general, we do need a function that can offer similar behaviour where
the lifetime of the software node is bound to the lifetime of the
device. But it just has to be a separate function so the behaviour is
optional. We can not remove the device_remove_properties() call from
device_del() before we have that new function, and before we have
replaced device_add_properties() calls with it in all the places that
require that behaviour.
This adds function device_create_managed_software_node() that can be
used for exactly that purpose. Software nodes created with it are
declared "managed", and separate handling for those nodes is added to
the software node code. The reference count of the "managed" nodes is
decremented when the device they are attached to is removed. This will
not affect the other nodes that are not declared "managed".
The function device_create_managed_software_node() has also one
additional feature that device_add_properties() does not have. It
allows the software nodes created with it to be part of a node
hierarchy by taking also an optional parent node as parameter.
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210204141711.53775-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following coccicheck warnings:
./drivers/base/power/domain.c:938:31-33: WARNING !A || A && B is
equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Suggested-by: Jiapeng Zhong <oswb@linux.alibaba.com>
Signed-off-by: Abaci Team <abaci-bugfix@linux.alibaba.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Linux 5.11-rc6
* tag 'v5.11-rc6': (1466 commits)
Linux 5.11-rc6
leds: rt8515: Add Richtek RT8515 LED driver
dt-bindings: leds: Add DT binding for Richtek RT8515
leds: trigger: fix potential deadlock with libata
leds: leds-ariel: convert comma to semicolon
leds: leds-lm3533: convert comma to semicolon
dt-bindings: Cleanup standard unit properties
soc: litex: Properly depend on HAS_IOMEM
tty: avoid using vfs_iocb_iter_write() for redirected console writes
null_blk: cleanup zoned mode initialization
cifs: fix dfs domain referrals
drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors
drm/nouveau/kms/nv50-: Report max cursor size to userspace
drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes
drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices
drm/nouveau/dispnv50: Restore pushing of all data.
io_uring: reinforce cancel on flush during exit
cifs: returning mount parm processing errors correctly
rxrpc: Fix memory leak in rxrpc_lookup_local
mlxsw: spectrum_span: Do not overwrite policer configuration
...
|
|
The clock API splits its interface into sleepable ant atomic contexts:
- clk_prepare/clk_unprepare for stuff that might sleep
- clk_enable_clk_disable for anything that may be done in atomic context
The code handling runtime PM for clocks only calls clk_disable() on
suspend requests, and clk_enable on resume requests. This means that
runtime PM with clock providers that only have the prepare/unprepare
methods implemented is basically useless.
Many clock implementations can't accommodate atomic contexts. This is
often the case when communication with the clock happens through another
subsystem like I2C or SCMI.
Let's make the clock PM code useful with such clocks by safely invoking
clk_prepare/clk_unprepare upon resume/suspend requests. Of course, when
such clocks are registered with the PM layer then pm_runtime_irq_safe()
can't be used, and neither pm_runtime_suspend() nor pm_runtime_resume()
may be invoked in atomic context.
For clocks that do implement the enable and disable methods then
everything just works as before.
A note on sparse:
According to https://lwn.net/Articles/109066/ there are things
that sparse can't cope with. In particular, pm_clk_op_lock() and
pm_clk_op_unlock() may or may not lock/unlock psd->lock depending on
some runtime condition. To work around that we tell it the lock is
always untaken for the purpose of static analisys.
Thanks to Naresh Kamboju for reporting issues with the initial patch.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use dev_printk() when possible to make messages more consistent with other
device-related messages.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The structleak plugin causes the stack frame size to grow immensely:
drivers/base/test/property-entry-test.c: In function 'pe_test_reference':
drivers/base/test/property-entry-test.c:481:1: error: the frame size of 2640 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
481 | }
| ^
drivers/base/test/property-entry-test.c: In function 'pe_test_uints':
drivers/base/test/property-entry-test.c:99:1: error: the frame size of 2592 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
Turn it off in this file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210125124533.101339-3-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
s/resposible/responsible/
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/20210120143312.3229181-1-unixbhaskar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
driver_create_groups doesn't seem to have ever existed. Change its
mention in a printk to 'driver_add_groups'.
Signed-off-by: Joe Pater <02joepater06@gmail.com>
Link: https://lore.kernel.org/r/20210110145442.15301-1-02joepater06@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This implements the remaining .graph_*() callbacks in the fwnode
operations structure for the software nodes. That makes the
fwnode_graph_*() functions available in the drivers also when software
nodes are used.
The implementation tries to mimic the "OF graph" as much as possible, but
there is no support for the "reg" device property. The ports will need to
have the index in their name which starts with "port@" (for example
"port@0", "port@1", ...) and endpoints will use the index of the software
node that is given to them during creation. The port nodes can also be
grouped under a specially named "ports" subnode, just like in DT, if
necessary.
The remote-endpoints are reference properties under the endpoint nodes
that are named "remote-endpoint".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Co-developed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
To maintain consistency with software_node_unregister_nodes(), reverse
the order in which the software_node_unregister_node_group() function
unregisters nodes.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Registering software_nodes with the .parent member set to point to a
currently unregistered software_node has the potential for problems,
so enforce parent -> child ordering in arrays passed in to
software_node_register_nodes().
Software nodes that are children of another software node should be
unregistered before their parent. To allow easy unregistering of an array
of software_nodes ordered parent to child, reverse the order in which
software_node_unregister_nodes() unregisters software_nodes.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
fwnode->secondary
This function is used to find fwnode endpoints against a device. In
some instances those endpoints are software nodes which are children of
fwnode->secondary. Add support to fwnode_graph_get_endpoint_by_id() to
find those endpoints by recursively calling itself passing the ptr to
fwnode->secondary in the event no endpoint is found for the primary.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Some types of fwnode_handle do not implement the device_is_available()
check, such as those created by software_nodes. There isn't really a
meaningful way to check for the availability of a device that doesn't
actually exist, so if the check isn't implemented just assume that the
"device" is present.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The software_node_get_next_child() function currently does not hold
references to the child software_node that it finds or put the ref that
is held against the old child - fix that.
Fixes: 59abd83672f7 ("drivers: base: Introducing software nodes to the firmware node framework")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The driver core ignores the return value of the remove callback, so
don't give isa drivers the chance to provide a value.
Adapt all isa_drivers with a remove callbacks accordingly; they all
return 0 unconditionally anyhow.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/
Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We need the fixes in here and this resolves a merge issue with
drivers/usb/gadget/udc/bdc/Kconfig.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.11-rc5 that resolve some
reported problems:
- revert of a -rc1 patch that was causing problems with some machines
- device link device name collision problem fix (busses only have to
name devices unique to their bus, not unique to all busses)
- kernfs splice bugfixes to resolve firmware loading problems for
Qualcomm systems.
- other tiny driver core fixes for minor issues reported.
All of these have been in linux-next with no reported problems"
* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix device link device name collision
driver core: Extend device_is_dependent()
kernfs: wire up ->splice_read and ->splice_write
kernfs: implement ->write_iter
kernfs: implement ->read_iter
Revert "driver core: Reorder devices on successful probe"
Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
drivers core: Free dma_range_map when driver probe failed
|
|
The various vfs_*() helpers are called by filesystems or by the vfs
itself to perform core operations such as create, link, mkdir, mknod, rename,
rmdir, tmpfile and unlink. Enable them to handle idmapped mounts. If the
inode is accessed through an idmapped mount map it into the
mount's user namespace and pass it down. Afterwards the checks and
operations are identical to non-idmapped mounts. If the initial user
namespace is passed nothing changes so non-idmapped mounts will see
identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-15-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Add "performance" column to debug summary which shows performance state
of all power domains and theirs devices.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
[tested on NVIDIA Tegra20/30/124 SoCs]
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Driver of a power domain provider may not be ready at the time of
of_genpd_add_subdomain() invocation. Make this function to return
-EPROBE_DEFER instead of -ENOENT in order to remove a need from
power domain drivers to handle the error code specially.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
[tested on NVIDIA Tegra20/30/124 SoCs]
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make set_performance_state() callback optional in order to remove the
need from power domain drivers to implement a dummy callback. If callback
isn't implemented by a GENPD driver, then the performance state is passed
to the parent domain.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
[tested on NVIDIA Tegra20/30/124 SoCs]
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, a PM domain's idle state is determined based on whether the
QoS requirements are met. However, even entering an idle state may waste
power if the minimum residency requirements aren't fulfilled.
CPU PM domains use the next timer wakeup for the CPUs in the domain to
determine the sleep duration of the domain. This is compared with the
idle state residencies to determine the optimal idle state. For other PM
domains, determining the sleep length is not that straight forward. But
if the device's next_event is available, we can use that to determine
the sleep duration of the PM domain.
Let's update the domain governor logic to check for idle state residency
based on the next wakeup of devices as well as QoS constraints. But
since, not all domains may contain devices capable of specifying the
next wakeup, let's enable this additional check only if specified by the
domain's flags when initializing the domain.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some devices may have a predictable interrupt pattern while executing
usecases. An example would be the VSYNC interrupt associated with
display devices. A 60 Hz display could cause a interrupt every 16 ms. If
the device were in a PM domain, the domain would need to be powered up
for device to resume and handle the interrupt.
Entering a domain idle state saves power, only if the residency of the
idle state is met. Without knowing the idle duration of the domain, the
governor would just choose the deepest idle state that matches the QoS
requirements. The domain might be powered off just as the device is
expecting to wake up. If devices could inform PM frameworks of their
next event, the parent PM domain's idle duration can be determined.
So let's add the dev_pm_genpd_set_next_wakeup() API for the device to
inform PM domains of the impending wakeup. This information will be the
domain governor to determine the best idle state given the wakeup.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
s/resposible/responsible/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The device link device's name was of the form:
<supplier-dev-name>--<consumer-dev-name>
This can cause name collision as reported here [1] as device names are
not globally unique. Since device names have to be unique within the
bus/class, add the bus/class name as a prefix to the device names used to
construct the device link device name.
So the devuce link device's name will be of the form:
<supplier-bus-name>:<supplier-dev-name>--<consumer-bus-name>:<consumer-dev-name>
[1] - https://lore.kernel.org/lkml/20201229033440.32142-1-michael@walle.cc/
Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs")
Cc: stable@vger.kernel.org
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210110175408.1465657-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the device passed as the target (second argument) to
device_is_dependent() is not completely registered (that is, it has
been initialized, but not added yet), but the parent pointer of it
is set, it may be missing from the list of the parent's children
and device_for_each_child() called by device_is_dependent() cannot
be relied on to catch that dependency.
For this reason, modify device_is_dependent() to check the ancestors
of the target device by following its parent pointer in addition to
the device_for_each_child() walk.
Fixes: 9ed9895370ae ("driver core: Functional dependencies tracking support")
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/17705994.d592GUb2YH@kreacher
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following coccicheck warnings:
./drivers/base/regmap/regcache.c:71:3-18: WARNING: Assignment of
0/1 to bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Link: https://lore.kernel.org/r/1611215961-33725-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This helper will register a software node and then assign
it to device at the same time. The function will also make
sure that the device can't have more than one software node.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210115094914.88401-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ARM64 numa implementation is generic enough that RISC-V can reuse that
implementation with very minor cosmetic changes. This will help both
ARM64 and RISC-V in terms of maintanace and feature improvement
Move the numa implementation code to common directory so that both ISAs
can reuse this. This doesn't introduce any function changes for ARM64.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix the MIPS CPU interrupt controller hierarchy
- Simplify the PRUSS Kconfig entry
- Eliminate trivial build warnings on the MIPS Loongson liointc
- Fix error path in devm_platform_get_irqs_affinity()
- Turn the BCM2836 IPI irq_eoi callback into irq_ack
- Fix initialisation of on-stack msi_alloc_info
- Cleanup spurious comma in irq-sl28cpld
Link: https://lore.kernel.org/r/20210110110001.2328708-1-maz@kernel.org
|
|
This reverts commit 5b6164d3465fcc13b5679c860c452963443172a7.
Stephan reports problems with this commit, so revert it for now.
Fixes: 5b6164d3465f ("driver core: Reorder devices on successful probe")
Link: https://lore.kernel.org/r/X/ycQpu7NIGI969v@gerhold.net
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Rafael. J. Wysocki <rafael@kernel.org>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
