summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)AuthorFilesLines
2006-11-18Revert "ACPI: created a dedicated workqueue for notify() execution"Linus Torvalds1-13/+21
This reverts commit 37605a6900f6b4d886d995751fcfeef88c4e462c. Again. This same bug has now been introduced twice: it was done earlier by commit b8d35192c55fb055792ff0641408eaaec7c88988, only to be reverted last time in commit 72945b2b90a5554975b8f72673ab7139d232a121. We must NOT try to queue up notify handlers to another thread than the normal ACPI execution thread, because the notifications on some systems seem to just keep on accumulating until we run out of memory and/or threads. Keeping events within the one deferred execution thread automatically throttles the events properly. At least the Compaq N620c will lock up completely on the first thermal event without this patch reverted. Cc: David Brownell <david-b@pacbell.net> Cc: Len Brown <len.brown@intel.com> Cc: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20[PATCH] acpi memory hotplug: remove strange add_memory fail messageYasunori Goto1-0/+12
I wrote a patch to avoid redundant memory hot-add call at boot time. This was cause of strange fail message of memory hotplug like "ACPI: add_memory failed". Memory is recognized by early boot code with EFI/E820. But, if DSDT describes memory devices for them, then hot-add code is called for already recognized memory, and it shows fail messages with -EEXIST. So, sys admin will misunderstand this message as something wrong by it. This patch avoids them by preventing redundant hot-add call until completion of driver initialization. [akpm@osdl.org: cleanups] Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20[PATCH] Change log level of a message of acpi_memhotplug to KERN_DEBUGYasunori Goto1-1/+1
I suppose this message seems quite useless except debugging. It just shows "Hotplug Mem Device". System admin can't know anything by this message. So, I would like to change it to KERN_DEBUG. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20[PATCH] fix "ACPI: Processor native C-states using MWAIT"Darrick J. Wong1-1/+1
This patch breaks C-state discovery on my IBM IntelliStation Z30 because the return value of acpi_processor_get_power_info_fadt is not assigned to "result" in the case that acpi_processor_get_power_info_cst returns -ENODEV. Thus, if ACPI provides C-state data via the FADT and not _CST (as is the case on this machine), we incorrectly exit the function with -ENODEV after reading the FADT. The attached patch sets the value of result so that we don't exit early. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Acked-by: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17[PATCH] acpi_processor_latency_notifier(): UP warning fixAndrew Morton1-0/+6
drivers/acpi/processor_idle.c:1112: warning: 'smp_callback' defined but not used Cc: Len Brown <lenb@kernel.org> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-14Pull trivial into test branchLen Brown7-11/+14
2006-10-14Pull bugzilla-5534 into test branchLen Brown2-34/+14
2006-10-14Pull ec into test branchLen Brown1-803/+293
2006-10-14Pull mwait into test branchLen Brown1-38/+63
2006-10-14Pull battery into test branchLen Brown2-7/+27
2006-10-14Pull ibm into test branchLen Brown1-2/+0
2006-10-14Pull asus into test branchLen Brown1-30/+37
2006-10-14ACPI: check battery status on resume for un/plug events during sleepJiri Kosina1-0/+14
Add ->resume method to the ACPI battery handler to check if the battery state has changed during sleep. If yes, update the ACPI internal data structures for benefit of /proc/acpi/battery/. Signed-off-by: Jiri Kosina <jikos@jikos.cz> Cc: Stefan Seyfried <seife@suse.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPICA: Fix incorrect handling of PCI Express Root Bridge _HIDEiichiro Oiwa1-7/+6
I could not get correct PCI Express bus number from the structure of acpi_object_extra. I always get zero as bus number regardless of bus location. I found that there is incorrect comparison with _HID (PNP0A08) in acpi/events/evrgnini.c and PCI Express _BBN method always fail. Therefore, we always get zero as PCI Express bus number. http://bugzilla.kernel.org/show_bug.cgi?id=7145 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: asus_acpi: don't printk on writing garbage to proc filesAlexey Dobriyan1-9/+1
This reporting is useless (we errno anyway). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: asus_acpi: fix proc files parsingDarren Jenkins1-23/+23
ICC complains about a "Pointless comparsion of unsigned interger with zero" @ line 760 & 808 of asus_acpi.c parse_arg() mentioned below returns -E but it's copied into unsigned variable... Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: fix printk format warningsRandy Dunlap2-2/+2
Fix printk format warnings in drivers/acpi: drivers/acpi/tables/tbget.c:326: warning: format '%X' expects type 'unsigned int', but argument 5 has type 'long unsigned int' drivers/acpi/tables/tbrsdt.c:189: warning: format '%X' expects type 'unsigned int', but argument 5 has type 'long unsigned int' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: fix section for CPU init functionsPierre Ossman2-2/+2
The ACPI processor init functions should be marked as __cpuinit as they use structures marked with __cpuinitdata. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: update comments in motherboard.cLen Brown1-0/+6
Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: acpi_pci_link_set() can allocate with either GFP_ATOMIC or GFP_KERNELJiri Kosina1-1/+1
acpi_pci_link_set() allocates both with interrupts on and with interrupts off (resume-time), so check interrupts and decide on GFP_ATOMIC or GFP_KERNEL at run-time. Signed-off-by: Jiri Kosina <jikos@jikos.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: fix potential OOPS in power driver with CONFIG_ACPI_DEBUGDmitry Torokhov1-6/+3
device was set to null and used before set in a debug printk Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: created a dedicated workqueue for notify() executionAlexey Y. Starikovskiy1-21/+13
http://bugzilla.kernel.org/show_bug.cgi?id=5534#c160 Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: Remove deferred execution from global lock acquire wakeup pathAlexey Y. Starikovskiy1-13/+1
On acquiring the ACPI global lock, if there were sleepers on the lock, we used to use acpi_os_execute() to defer a thread which would signal sleepers. Now just signal the semaphore directly. http://bugzilla.kernel.org/show_bug.cgi?id=5534#c159 Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: EC: export ec_transaction() for msi-laptop driverLennart Poettering1-0/+2
Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: EC: Simplify acpi_hw_low_level*() with inb()/outb().Denis M. Sadykov1-79/+45
Simplify acpi_hw_low_level_xxx() functions to inb() and outb(). Signed-off-by: Alexey Y. Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: EC: Unify poll and interrupt gpe handlersDenis M. Sadykov1-95/+12
Signed-off-by: Alexey Y. Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: EC: Unify poll and interrupt mode transaction functionsDenis M. Sadykov1-81/+29
Signed-off-by: Alexey Y. Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: EC: Remove unused variables and duplicated codeDenis M. Sadykov1-458/+253
Signed-off-by: Alexey Y. Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: EC: Remove unnecessary delay added by previous transation patch.Denis M. Sadykov1-53/+50
Remove unnecessary delay (50 ms) while reading data from EC in interrupt mode. Signed-off-by: Alexey Y. Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: consolidate functions in acpi ec driverLennart Poettering1-230/+95
Unify the following functions: acpi_ec_poll_read() acpi_ec_poll_write() acpi_ec_poll_query() acpi_ec_intr_read() acpi_ec_intr_write() acpi_ec_intr_query() into: acpi_ec_poll_transaction() acpi_ec_intr_transaction() These new functions take as arguments an ACPI EC command, a few bytes to write to the EC data register and a buffer for a few bytes to read from the EC data register. The old _read(), _write(), _query() are just special cases of these functions. Then unified the code in acpi_ec_poll_transaction() and acpi_ec_intr_transaction() a little more. Both functions are now just wrappers around the new acpi_ec_transaction_unlocked() function. The latter contains the EC access logic, the two original function now just do their special way of locking and call the the new function for the actual work. This saves a lot of very similar code. The primary reason for doing this, however, is that my driver for MSI 270 laptops needs to issue some non-standard EC commands in a safe way. Due to this I added a new exported function similar to ec_write()/ec_write() which is called ec_transaction() and is essentially just a wrapper around acpi_ec_{poll,intr}_transaction(). Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: Processor native C-states using MWAITVenkatesh Pallipadi1-38/+63
Intel processors starting with the Core Duo support support processor native C-state using the MWAIT instruction. Refer: Intel Architecture Software Developer's Manual http://www.intel.com/design/Pentium4/manuals/253668.htm Platform firmware exports the support for Native C-state to OS using ACPI _PDC and _CST methods. Refer: Intel Processor Vendor-Specific ACPI: Interface Specification http://www.intel.com/technology/iapc/acpi/downloads/302223.htm With Processor Native C-state, we use 'MWAIT' instruction on the processor to enter different C-states (C1, C2, C3). We won't use the special IO ports to enter C-state and no SMM mode etc required to enter C-state. Overall this will mean better C-state support. One major advantage of using MWAIT for all C-states is, with this and "treat interrupt as break event" feature of MWAIT, we can now get accurate timing for the time spent in C1, C2, .. states. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: sbs: fix module_param() initializersLebedev, Vladimir P1-5/+5
Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: sbs: check for NULL device pointerLebedev, Vladimir P1-2/+8
Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: ibm_acpi: Remove experimental status for brightness and volume.Stefan Schmidt1-2/+0
The brightness and volume features from ibm-acpi are stable. The experimental flag is no longer needed. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Borislav Deianov <borislav@users.sourceforge.net> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: asus_acpi: W3000 supportMarek W1-1/+16
Add support for W3000 (W3V) and indirectly fixes an issue with kmilo under KDE (it was triggering excessive LCD read error messages by querying asus_acpi module) allowing people (I am probably the only one who tested this) with W3000 to run kmilo. Cc: Karol Kozimor <sziwan@hell.org.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-11ACPI: Allow setting SCI_EN bit in PM1_CONTROL registerLinus Torvalds1-2/+0
This is needed by at least the Mac Mini's, which (incorrectly) come back from suspend with SCI_EN clear. Thanks to Frédéric Riss for hunting this down. Acked-by: Frédéric Riss <frederic.riss@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] acpi NULL noise removalAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells1-1/+1
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-04fix drivers/acpi/Kconfig typosMatt LaPlante1-3/+3
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-01[PATCH] maximum latency tracking infrastructureArjan van de Ven1-4/+34
Add infrastructure to track "maximum allowable latency" for power saving policies. The reason for adding this infrastructure is that power management in the idle loop needs to make a tradeoff between latency and power savings (deeper power save modes have a longer latency to running code again). The code that today makes this tradeoff just does a rather simple algorithm; however this is not good enough: There are devices and use cases where a lower latency is required than that the higher power saving states provide. An example would be audio playback, but another example is the ipw2100 wireless driver that right now has a very direct and ugly acpi hook to disable some higher power states randomly when it gets certain types of error. The proposed solution is to have an interface where drivers can * announce the maximum latency (in microseconds) that they can deal with * modify this latency * give up their constraint and a function where the code that decides on power saving strategy can query the current global desired maximum. This patch has a user of each side: on the consumer side, ACPI is patched to use this, on the producer side the ipw2100 driver is patched. A generic maximum latency is also registered of 2 timer ticks (more and you lose accurate time tracking after all). While the existing users of the patch are x86 specific, the infrastructure is not. I'd like to ask the arch maintainers of other architectures if the infrastructure is generic enough for their use (assuming the architecture has such a tradeoff as concept at all), and the sound/multimedia driver owners to look at the driver facing API to see if this is something they can use. [akpm@osdl.org: cleanups] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jesse.barnes@intel.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01[PATCH] hot-add-mem x86_64: memory_add_physaddr_to_nid node fixupKeith Mannthey1-0/+4
In cases where the acpi memory-add event does not containe the pxm (node) infomation allow the driver to look up node info based on the address. The acpi_get_node call returns -1 if it can't decode the pxm info, this causes add_memory to panic. acpi_get_node would have to decode the resource from the handle (a lenghty proposition). This seems to be the cleanist point to interject the hook. [kamezawa.hiroyu@jp.fujitsu.com: build fixes] [y-goto@jp.fujitsu.com: build fixes] Signed-off-by: Keith Mannthey <kmannth@us.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] Really ignore kmem_cache_destroy return valueAlexey Dobriyan1-1/+1
* Rougly half of callers already do it by not checking return value * Code in drivers/acpi/osl.c does the following to be sure: (void)kmem_cache_destroy(cache); * Those who check it printk something, however, slab_error already printed the name of failed cache. * XFS BUGs on failed kmem_cache_destroy which is not the decision low-level filesystem driver should make. Converted to ignore. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27i2c: Constify i2c_algorithm declarations, part 2Jean Delvare1-1/+1
i2c: Constify i2c_algorithm declarations, part 2 Make struct i2c_algorithm declarations const in all i2c bus drivers where it is possible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-21Merge trivial low-risk suspend hotkey bugzilla-5918 into releaseLen Brown10-175/+159
2006-08-17ACPI: avoid irqrouter_resume might_sleep oops on resume from S4Len Brown2-1/+11
__might_sleep+0x8e/0x93 acpi_os_wait_semaphore+0x50/0xa3 acpi_ut_acquire_mutex+0x28/0x6a acpi_ns_get_node+0x46/0x88 acpi_ns_evaluate+0x2d/0xfc acpi_rs_set_srs_method_data+0xc5/0xe1 acpi_set_current_resources+0x31/0x3f acpi_pci_link_set+0xfc/0x1a5 irqrouter_resume+0x48/0x5f and __might_sleep+0x8e/0x93 kmem_cache_alloc+0x2a/0x8f acpi_evaluate_integer+0x32/0x96 acpi_bus_get_status+0x30/0x84 acpi_pci_link_set+0x12a/0x1a5 irqrouter_resume+0x48/0x5f http://bugzilla.kernel.org/show_bug.cgi?id=6810 Signed-off-by: Len Brown <len.brown@intel.com>
2006-08-17ACPI: hotkey.c fixes, fix for potential crash of hotkey.cHandle X1-162/+119
While going through the code, I found out some memory leaks and potential crashes in drivers/acpi/hotkey.c Please find the patch to fix them. This patch does the following, 1. Fixes memory leaks in error paths of hotkey_write_config 2. Fixes freeing unallocated pointers in the error paths of hotkey_write_config 3. Uses a loop instead of linear searching for parsing the userspace input in get_params 4. Uses array of char * instead of passing 4 pointer parameters explicitly into the init_{poll_}hotkey_* static functions Signed-off-by: Andrew Morton <akpm@osdl.org> Acked-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-08-16ACPI: memory hotplug: remove useless message at boot timeYasunori Goto1-6/+2
This is to remove noisy useless message at boot. The message is a ton of "ACPI Exception (acpi_memory-0492): AE_ERROR, handle is no memory device" In my emulation, number of memory devices are not so many (only 6), but, this messages are displayed 114 times. It is showed by acpi_memory_register_notify_handler() which is called by acpi_walk_namespace(). acpi_walk_namespace() parses all of ACPI's namespace and execute acpi_memory_register_notify_handler(). So, it is called for all of the device which is defined in namespace. If the parsing device is not memory, acpi_memhotplug ignores it due to "no match" and will parse next device. This is normal route, not an exception. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-08-16ACPI: verbose on kset/kobject_register errorsRandy Dunlap1-2/+10
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-08-16ACPI: add message if firmware_register() init failsRandy Dunlap1-1/+5
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-08-16ACPI: skip smart battery init when acpi=offLen Brown1-0/+3
Signed-off-by: Len Brown <len.brown@intel.com>