Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit 8b356e536e69f3a4d6778ae9f0858a1beadabb1f ]
commit 72f2ecb7ece7 ("ACPI: bus: Set CPPC _OSC bits for all and
when CPPC_LIB is supported") added support for claiming to
support CPPC in _OSC on non-Intel platforms.
This unfortunately caused a regression on a vartiety of AMD
platforms in the field because a number of AMD platforms don't set
the `_OSC` bit 5 or 6 to indicate CPPC or CPPC v2 support.
As these AMD platforms already claim CPPC support via a dedicated
MSR from `X86_FEATURE_CPPC`, use this enable this feature rather
than requiring the `_OSC` on platforms with a dedicated MSR.
If there is additional breakage on the shared memory designs also
missing this _OSC, additional follow up changes may be needed.
Fixes: 72f2ecb7ece7 ("Set CPPC _OSC bits for all and when CPPC_LIB is supported")
Reported-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7feec7430edddb87c24b0a86b08a03d0b496a755 ]
Previously the kernel used to ignore whether the firmware masked CPPC
or CPPCv2 and would just pretend that it worked.
When support for the USB4 bit in _OSC was introduced from commit
9e1f561afb ("ACPI: Execute platform _OSC also with query bit clear")
the kernel began to look at the return when the query bit was clear.
This caused regressions that were misdiagnosed and attempted to be solved
as part of commit 2ca8e6285250 ("Revert "ACPI: Pass the same capabilities
to the _OSC regardless of the query flag""). This caused a different
regression where non-Intel systems weren't able to negotiate _OSC
properly.
This was reverted in commit 2ca8e6285250 ("Revert "ACPI: Pass the same
capabilities to the _OSC regardless of the query flag"") and attempted to
be fixed by commit c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not
supported by firmware") but the regression still returned.
These systems with the regression only load support for CPPC from an SSDT
dynamically when _OSC reports CPPC v2. Avoid the problem by not letting
CPPC satisfy the requirement in `acpi_cppc_processor_probe`.
Reported-by: CUI Hao <cuihao.leo@gmail.com>
Reported-by: maxim.novozhilov@gmail.com
Reported-by: lethe.tree@protonmail.com
Reported-by: garystephenwright@gmail.com
Reported-by: galaxyking0419@gmail.com
Fixes: c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not supported by firmware")
Fixes: 2ca8e6285250 ("Revert "ACPI Pass the same capabilities to the _OSC regardless of the query flag"")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213023
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2075387
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: CUI Hao <cuihao.leo@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 72f2ecb7ece7c1d89758d4929d98e95d95fe7199 ]
The _OSC method allows the OS and firmware to communicate about
supported features/capabitlities. It also allows the OS to take
control of some features.
In ACPI 6.4, s6.2.11.2 Platform-Wide OSPM Capabilities, the CPPC
(resp. v2) bit should be set by the OS if it 'supports controlling
processor performance via the interfaces described in the _CPC
object'.
The OS supports CPPC and parses the _CPC object only if
CONFIG_ACPI_CPPC_LIB is set. Replace the x86 specific
boot_cpu_has(X86_FEATURE_HWP) dynamic check with an arch
generic CONFIG_ACPI_CPPC_LIB build-time check.
Note:
CONFIG_X86_INTEL_PSTATE selects CONFIG_ACPI_CPPC_LIB.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0651ab90e4ade17f1d4f4367b70f6120480410f3 ]
ACPI 6.2 Section 6.2.11.2 'Platform-Wide OSPM Capabilities':
Starting with ACPI Specification 6.2, all _CPC registers can be in
PCC, System Memory, System IO, or Functional Fixed Hardware address
spaces. OSPM support for this more flexible register space scheme is
indicated by the “Flexible Address Space for CPPC Registers” _OSC bit
Otherwise (cf ACPI 6.1, s8.4.7.1.1.X), _CPC registers must be in:
- PCC or Functional Fixed Hardware address space if defined
- SystemMemory address space (NULL register) if not defined
Add the corresponding _OSC bit and check it when parsing _CPC objects.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3a0cf7ab8df3878a7e2f3d29275b785cf4e7afb6 upstream.
Some systems have an ACPI video bus but not ACPI video devices with
backlight capability. On these devices brightness key-presses are
(logically) not reported through the ACPI video bus.
Change how acpi_video_handles_brightness_key_presses() determines if
brightness key-presses are handled by the ACPI video driver to avoid
vendor specific drivers/platform/x86 drivers filtering out their
brightness key-presses even though they are the only ones reporting
these presses.
Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3bd561e1572ee02a50cd1a5be339abf1a5b78d56 upstream.
struct acpi_device_properties describes one source of properties present
on either struct acpi_device or struct acpi_data_node. When properties are
parsed, both are populated but when released, only those properties that
are associated with the device node are freed.
Fix this by also releasing memory of the data node properties.
Fixes: 5f5e4890d57a ("ACPI / property: Allow multiple property compatible _DSD entries")
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 988d7a14408db4183202f16bb02b8149b9da3727 ]
When building with W=1, we get the following warning:
drivers/acpi/arm64/agdi.c:88:13: warning: no previous prototype for ‘acpi_agdi_init’ [-Wmissing-prototypes]
void __init acpi_agdi_init(void)
Include AGDI driver's header file to pull in the prototype definition
for acpi_agdi_init() to get rid of the compiler warning
Fixes: a2a591fb76e6 ("ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6380b7b2b29da9d9c5ab2d4a265901cd93ba3696 ]
The transition_delay_us (struct cpufreq_policy) is currently defined
as:
Preferred average time interval between consecutive invocations of
the driver to set the frequency for this policy. To be set by the
scaling driver (0, which is the default, means no preference).
The transition_latency represents the amount of time necessary for a
CPU to change its frequency.
A PCCT table advertises mutliple values:
- pcc_nominal: Expected latency to process a command, in microseconds
- pcc_mpar: The maximum number of periodic requests that the subspace
channel can support, reported in commands per minute. 0 indicates no
limitation.
- pcc_mrtt: The minimum amount of time that OSPM must wait after the
completion of a command before issuing the next command,
in microseconds.
cppc_get_transition_latency() allows to get the max of them.
commit d4f3388afd48 ("cpufreq / CPPC: Set platform specific
transition_delay_us") allows to select transition_delay_us based on
the platform, and fallbacks to cppc_get_transition_latency()
otherwise.
If _CPC objects are not using PCC channels (no PPCT table), the
transition_delay_us is set to CPUFREQ_ETERNAL, leading to really long
periods between frequency updates (~4s).
If the desired_reg, where performance requests are written, is in
SystemMemory or SystemIo ACPI address space, there is no delay
in requests. So return 0 instead of CPUFREQ_ETERNAL, leading to
transition_delay_us being set to LATENCY_MULTIPLIER us (1000 us).
This patch also adds two macros to check the address spaces.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d52848620de00cde4a3a5df908e231b8c8868250 ]
ASUS B1400CEAE fails to resume from suspend to idle by default. This was
bisected back to commit df4f9bc4fb9c ("nvme-pci: add support for ACPI
StorageD3Enable property") but this is a red herring to the problem.
Before this commit the system wasn't getting into deepest sleep state.
Presumably this commit is allowing entry into deepest sleep state as
advertised by firmware, but there are some other problems related to
the wakeup.
As it is confirmed the system works properly with S3, set the default for
this system to S3.
Reported-by: Jian-Hong Pan <jhp@endlessos.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215742
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1bbc21785b7336619fb6a67f1fff5afdaf229acc upstream.
Currently the sysfs interface maps the BERT error region as "memory"
(through acpi_os_map_memory()) in order to copy the error records into
memory buffers through memory operations (eg memory_read_from_buffer()).
The OS system cannot detect whether the BERT error region is part of
system RAM or it is "device memory" (eg BMC memory) and therefore it
cannot detect which memory attributes the bus to memory support (and
corresponding kernel mapping, unless firmware provides the required
information).
The acpi_os_map_memory() arch backend implementation determines the
mapping attributes. On arm64, if the BERT error region is not present in
the EFI memory map, the error region is mapped as device-nGnRnE; this
triggers alignment faults since memcpy unaligned accesses are not
allowed in device-nGnRnE regions.
The ACPI sysfs code cannot therefore map by default the BERT error
region with memory semantics but should use a safer default.
Change the sysfs code to map the BERT error region as MMIO (through
acpi_os_map_iomem()) and use the memcpy_fromio() interface to read the
error region into the kernel buffer.
Link: https://lore.kernel.org/linux-arm-kernel/31ffe8fc-f5ee-2858-26c5-0fd8bdd68702@arm.com
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0g+OVbhuUUDrLUCfX_mVqY_e8ubgLTU98=jfjTeb4t+Pw@mail.gmail.com
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Veronika Kabatova <vkabatov@redhat.com>
Tested-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit bfe55a1f7fd6bfede16078bf04c6250fbca11588.
This was presumably misdiagnosed as an inability to use C3 at
all when I suspect the real problem is just misconfiguration of
C3 vs. ARB_DIS.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Tested-by: Woody Suwalski <wsuwalski@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The "safe state" index is used by acpi_idle_enter_bm() to avoid
entering a C-state that may require bus mastering to be disabled
on entry in the cases when this is not going to happen. For this
reason, it should not be set to point to C3 type of C-states, because
they may require bus mastering to be disabled on entry in principle.
This was broken by commit d6b88ce2eb9d ("ACPI: processor idle: Allow
playing dead in C3 state") which inadvertently allowed the "safe
state" index to point to C3 type of C-states.
This results in a machine that won't boot past the point when it first
enters C3. Restore the correct behaviour (either demote to C1/C2, or
use C3 but also set ARB_DIS=1).
I hit this on a Fujitsu Siemens Lifebook S6010 (P3) machine.
Fixes: d6b88ce2eb9d ("ACPI: processor idle: Allow playing dead in C3 state")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Woody Suwalski <wsuwalski@gmail.com>
[ rjw: Subject and changelog adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* acpi-bus:
ACPI: bus: Eliminate acpi_bus_get_device()
|
|
Replace the last instance of acpi_bus_get_device(), added recently
by commit 87e59b36e5e2 ("spi: Support selection of the index of the
ACPI Spi Resource before alloc"), with acpi_fetch_acpi_dev() and
finally drop acpi_bus_get_device() that has no more users.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
|
|
Revert commit 87ebbb8c612b ("ACPI: processor: idle: Only flush cache
on entering C3") that broke the assumptions of the acpi_idle_play_dead()
callers.
Namely, the CPU cache must always be flushed in acpi_idle_play_dead(),
regardless of the target C-state that is going to be requested, because
this is likely to be part of a CPU offline procedure or preparation for
entering a system-wide sleep state and the lack of synchronization
between the CPU cache and RAM may lead to problems going forward, for
example when the CPU is brought back online.
In particular, it breaks resume from suspend-to-RAM on Lenovo ThinkPad
C13 which fails occasionally until the problematic commit is reverted.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These are fixes and cleanup on top of the previously merged ACPI
material.
Specifics:
- Avoid out-of-bounds access when parsing _CPC data (Rafael Wysocki)
- Change default error code and clean up debug messages in ACPI CPPC
probe (Rafael Wysocki)
- Replace usage of found with dedicated list iterator variable in the
ACPI IPMI driver (Jakob Koschel)
- Clean up variable name confusion in APEI (Jakob Koschel)
- Make LAPIC_ADDR_OVR address readable in a message parsed during
MADT parsing (Vasant Hegde)"
* tag 'acpi-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Change default error code and clean up debug messages in probe
ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
ACPI: tables: Make LAPIC_ADDR_OVR address readable in message
ACPI: IPMI: replace usage of found with dedicated list iterator variable
ACPI, APEI: Use the correct variable for sizeof()
|
|
Merge IMPI driver changes, ACPI tables parsing code changes and
additional APEI changes for v5.18-rc1:
- Replace usage of found with dedicated list iterator variable
in the ACPI IPMI driver (Jakob Koschel).
- Make LAPIC_ADDR_OVR address readable in a message parsed during
MADT parsing (Vasant Hegde).
- Clean up variable name confusion in APEI (Jakob Koschel).
* acpi-ipmi:
ACPI: IPMI: replace usage of found with dedicated list iterator variable
* acpi-tables:
ACPI: tables: Make LAPIC_ADDR_OVR address readable in message
* acpi-apei:
ACPI, APEI: Use the correct variable for sizeof()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The update for this cycle includes the deprecation of block-aperture
mode and a new perf events interface for the papr_scm nvdimm driver.
The perf events approach was acked by PeterZ.
- Add perf support for nvdimm events, initially only for 'papr_scm'
devices.
- Deprecate the 'block aperture' support in libnvdimm, it only ever
existed in the specification, not in shipping product"
* tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/blk: Fix title level
MAINTAINERS: remove section LIBNVDIMM BLK: MMIO-APERTURE DRIVER
powerpc/papr_scm: Fix build failure when
drivers/nvdimm: Fix build failure when CONFIG_PERF_EVENTS is not set
nvdimm/region: Delete nd_blk_region infrastructure
ACPI: NFIT: Remove block aperture support
nvdimm/namespace: Delete nd_namespace_blk
nvdimm/namespace: Delete blk namespace consideration in shared paths
nvdimm/blk: Delete the block-aperture window driver
nvdimm/region: Fix default alignment for small regions
docs: ABI: sysfs-bus-nvdimm: Document sysfs event format entries for nvdimm pmu
powerpc/papr_scm: Add perf interface support
drivers/nvdimm: Add perf interface to expose nvdimm performance stats
drivers/nvdimm: Add nvdimm pmu structure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- tracepoints when Linux acts as an I2C client
- added support for AMD PSP
- whole subsystem now uses generic_handle_irq_safe()
- piix4 driver gained MMIO access enabling so far missed controllers
with AMD chipsets
- a bulk of device driver updates, refactorization, and fixes.
* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (61 commits)
i2c: mux: demux-pinctrl: do not deactivate a master that is not active
i2c: meson: Fix wrong speed use from probe
i2c: add tracepoints for I2C slave events
i2c: designware: Remove code duplication
i2c: cros-ec-tunnel: Fix syntax errors in comments
MAINTAINERS: adjust XLP9XX I2C DRIVER after removing the devicetree binding
i2c: designware: Mark dw_i2c_plat_{suspend,resume}() as __maybe_unused
i2c: mediatek: Add i2c compatible for Mediatek MT8168
dt-bindings: i2c: update bindings for MT8168 SoC
i2c: mt65xx: Simplify with clk-bulk
i2c: i801: Drop two outdated comments
i2c: xiic: Make bus names unique
i2c: i801: Add support for the Process Call command
i2c: i801: Drop useless masking in i801_access
i2c: tegra: Add SMBus block read function
i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers
i2c: designware: Lock the adapter while setting the suspended flag
i2c: mediatek: remove redundant null check
i2c: mediatek: modify bus speed calculation formula
i2c: designware: Fix improper usage of readl
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"New drivers:
- AMD Host System Management Port (HSMP)
- Intel Software Defined Silicon
Removed drivers (functionality folded into other drivers):
- intel_cht_int33fe_microb
- surface3_button
amd-pmc:
- s2idle bug-fixes
- Support for AMD Spill to DRAM STB feature
hp-wmi:
- Fix SW_TABLET_MODE detection method (and other fixes)
- Support omen thermal profile policy v1
serial-multi-instantiate:
- Add SPI device support
- Add support for CS35L41 amplifiers used in new laptops
think-lmi:
- syfs-class-firmware-attributes Certificate authentication support
thinkpad_acpi:
- Fixes + quirks
- Add platform_profile support on AMD based ThinkPads
x86-android-tablets:
- Improve Asus ME176C / TF103C support
- Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets
Lots of various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (60 commits)
platform/x86: think-lmi: Certificate authentication support
Documentation: syfs-class-firmware-attributes: Lenovo Certificate support
platform/x86: amd-pmc: Only report STB errors when STB enabled
platform/x86: amd-pmc: Drop CPU QoS workaround
platform/x86: amd-pmc: Output error codes in messages
platform/x86: amd-pmc: Move to later in the suspend process
ACPI / x86: Add support for LPS0 callback handler
platform/x86: thinkpad_acpi: consistently check fan_get_status return.
platform/x86: hp-wmi: support omen thermal profile policy v1
platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated
platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls
platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method
platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)
platform/x86: amd-pmc: Validate entry into the deepest state on resume
platform/x86: thinkpad_acpi: Don't use test_bit on an integer
platform/x86: thinkpad_acpi: Fix compiler warning about uninitialized err variable
platform/x86: thinkpad_acpi: clean up dytc profile convert
platform/x86: x86-android-tablets: Depend on EFI and SPI
platform/x86: amd-pmc: uninitialized variable in amd_pmc_s2d_init()
platform/x86: intel-uncore-freq: fix uncore_freq_common_init() error codes
...
|
|
Change the default error code returned by acpi_cppc_processor_probe()
from -EFAULT (which is completely inadequate) to -ENODATA and change
the debug messages printed by it to contain more information and be
more consistent.
While at it, format some white space to follow the coding style.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
|
|
If the NumEntries field in the _CPC return package is less than 2, do
not attempt to access the "Revision" element of that package, because
it may not be present then.
Fixes: 337aadff8e45 ("ACPI: Introduce CPU performance controls using CPPC")
BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
|
|
Without fix:
[ 0.005429] ACPI: LAPIC_ADDR_OVR (address[(____ptrval____)])
With fix:
[ 0.005429] ACPI: LAPIC_ADDR_OVR (address[0x800fee00000])
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been a fairly calm development cycle. There are a few last-minute
ALSA core fixes, most notably for covering PCM ioctl races, but the
most of rest are device-specific changes.
Below are some highlights:
ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required
for Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280,
Renesas RZ/V2L, Texas Instruments TAS585M
HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices"
* tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (486 commits)
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec
ALSA: pcm: Add stream lock during PCM reset ioctl operations
ALSA: pcm: Fix races among concurrent prealloc proc writes
ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls
ALSA: pcm: Fix races among concurrent read/write and buffer changes
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls
ASoC: atmel: mchp-pdmc: print the correct property name
MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl
ASoC: SOF: Add a new dai_get_clk topology IPC op
ASoC: SOF: topology: Add ops for setting up and tearing down pipelines
ASoC: SOF: expose sof_route_setup()
ASoC: SOF: Add dai_link_fixup PCM op for IPC3
ASoC: SOF: Add trigger PCM op for IPC3
ASoC: SOF: Define hw_params PCM op for IPC3
ASoC: SOF: Introduce IPC3 PCM hw_free op
ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function
ASoC: SOF: Introduce IPC-specific PCM ops
ASoC: SOF: Add bytes_ext control IPC ops for IPC3
ASoC: SOF: Add bytes_get/put control IPC ops for IPC3
...
|
|
While the original code is valid, it is not the obvious choice for the
sizeof() call and in preparation to limit the scope of the list iterator
variable the sizeof should be changed to the size of the variable
being allocated.
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over the code and a new piece
of documentation for Intel uncore frequency scaling.
Functionality-wise, the intel_idle driver will support Sapphire Rapids
Xeons natively now (with some extra facilities for controlling
C-states more precisely on those systems), virtual guests will take
the ACPI S4 hardware signature into account by default, the
intel_pstate driver will take the defualt EPP value from the firmware,
cpupower utility will support the AMD P-state driver added in the
previous cycle, and there is a new tracer utility for that driver.
Specifics:
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural support
for LPI to avoid using it on x86 by mistake (Mario Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver to
work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix up
white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by default
(David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui)"
* tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
cpufreq: powernow-k8: Re-order the init checks
cpuidle: intel_idle: Drop redundant backslash at line end
cpuidle: intel_idle: Update intel_idle() kerneldoc comment
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
cpufreq: intel_pstate: Use firmware default EPP
cpufreq: unify show() and store() naming and use __ATTR_XX
PM: core: keep irq flags in device_pm_check_callbacks()
cpuidle: haltpoll: Call cpuidle_poll_state_init() later
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
PM: sleep: Add device name to suspend_report_result()
turbostat: fix PC6 displaying on some systems
intel_idle: add core C6 optimization for SPR
intel_idle: add 'preferred_cstates' module argument
intel_idle: add SPR support
PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()
ACPI: processor idle: Check for architectural support for LPI
cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
...
|
|
Merge changes related to system sleep, PM domains changes and power
management documentation changes for 5.18-rc1:
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by
default (David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
* pm-sleep:
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
PM: sleep: Add device name to suspend_report_result()
PM: suspend: fix return value of __setup handler
PM: hibernate: fix __setup handler error handling
PM: hibernate: Clean up non-kernel-doc comments
PM: sleep: wakeup: Fix typos in comments
PM: hibernate: fix load_image_and_restore() error path
* pm-domains:
PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove()
PM: domains: use dev_err_probe() to simplify error handling
PM: domains: Prevent power off for parent unless child is in deepest state
* pm-docs:
Documentation: admin-guide: pm: Document uncore frequency scaling
|
|
Merge ACPI SoC drivers changes, ACPI backlight driver changes and APEI
changes for 5.18-rc1:
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
* acpi-soc:
ACPI: LPSS: Provide an SSP type to the driver
ACPI: LPSS: Constify properties member in struct lpss_device_desc
ACPI: platform: Constify properties parameter in acpi_create_platform_device()
* acpi-video:
ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU
* acpi-apei:
ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device
ACPI/APEI: Limit printable size of BERT table data
ACPI: APEI: fix return value of __setup handlers
ACPI: APEI: rename ghes_init() with an "acpi_" prefix
ACPI: APEI: explicit init of HEST and GHES in apci_init()
|
|
Merge ACPI EC driver changes, CPPC-related changes, ACPI fan driver
changes and ACPI battery driver changes for 5.18-rc1:
- Make wakeup events checks in the ACPI EC driver more
straightforward and clean up acpi_ec_submit_event() (Rafael
Wysocki).
- Make it possible to obtain the CPU capacity with the help of CPPC
information (Ionela Voinescu).
- Improve fine grained fan control in the ACPI fan driver and
document it (Srinivas Pandruvada).
- Add device HID and quirk for Microsoft Surface Go 3 to the ACPI
battery driver (Maximilian Luz).
* acpi-ec:
ACPI: EC: Rearrange code in acpi_ec_submit_event()
ACPI: EC: Reduce indentation level in acpi_ec_submit_event()
ACPI: EC: Do not return result from advance_transaction()
* acpi-cppc:
arm64, topology: enable use of init_cpu_capacity_cppc()
arch_topology: obtain cpu capacity using information from CPPC
x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc()
* acpi-fan:
Documentation/admin-guide/acpi: Add documentation for fine grain control
ACPI: fan: Add additional attributes for fine grain control
ACPI: fan: Properly handle fine grain control
ACPI: fan: Optimize struct acpi_fan_fif
ACPI: fan: Separate file for attributes creation
ACPI: fan: Fix error reporting to user space
* acpi-battery:
ACPI: battery: Add device HID and quirk for Microsoft Surface Go 3
|
|
Merge ACPI power management changes, ACPI device properties handling
changes, x86-specific ACPI changes and miscellaneous ACPI changes for
5.18-rc1:
- Add power management debug messages related to suspend-to-idle in
two places (Rafael Wysocki).
- Fix __acpi_node_get_property_reference() return value and clean up
that function (Andy Shevchenko, Sakari Ailus).
- Fix return value of the __setup handler in the ACPI PM timer clock
source driver (Randy Dunlap).
- Clean up double words in two comments (Tom Rix).
- Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
Nextbook Ares 8 (Hans de Goede).
- Clean up frequency invariance handling on x86 in the ACPI CPPC
library (Huang Rui).
- Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
Cilissen).
* acpi-pm:
ACPI: EC / PM: Print additional debug message in acpi_ec_dispatch_gpe()
ACPI: PM: Print additional debug message in acpi_s2idle_wake()
* acpi-properties:
ACPI: property: Get rid of redundant 'else'
ACPI: properties: Consistently return -ENOENT if there are no more references
* acpi-misc:
clocksource: acpi_pm: fix return value of __setup handler
ACPI: clean up double words in two comments
* acpi-x86:
ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board
x86/ACPI: CPPC: Move init_freq_invariance_cppc() into x86 CPPC
x86: Expose init_freq_invariance() to topology header
x86/ACPI: CPPC: Move AMD maximum frequency ratio setting function into x86 CPPC
x86/ACPI: CPPC: Rename cppc_msr.c to cppc.c
ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L
ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8
|
|
Merge ACPICA changes, ACPI OS-layer changes, ACPI bus-type and _OSC
support changes and ACPI tables parsing changes for 5.18-rc1:
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
* acpica:
ACPICA: Avoid walking the ACPI Namespace if it is not there
ACPICA: Use uintptr_t and offsetof() in Linux kernel builds
* acpi-osl:
ACPI: OSL: Fix and clean up acpi_os_read/write_port()
* acpi-bus:
ACPI: bus: Avoid using CPPC if not supported by firmware
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
ACPI: bus: Introduce acpi_bus_for_each_dev()
* acpi-tables:
ACPI: tables: Add AGDI to the list of known table signatures
ACPI: tables: Add CEDT signature to the list of known tables
|
|
|
|
Currenty the latest thing run during a suspend to idle attempt is
the LPS0 `prepare_late` callback and the earliest thing is the
`resume_early` callback.
There is a desire for the `amd-pmc` driver to suspend later in the
suspend process (ideally the very last thing), so create a callback
that it or any other driver can hook into to do this.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220317141445.6498-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
If the platform firmware indicates that it does not support CPPC by
clearing the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits in the
platform _OSC capabilities mask, avoid attempting to evaluate _CPC
which may fail in that case.
Because the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits are only
added to the supported platform capabilities mask on x86, when
X86_FEATURE_HWP is supported, allow _CPC to be evaluated regardless
in the other cases.
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0i=ecAksq0TV+iLVObm-=fUfdqPABzzkgm9K6KxO1ZCcg@mail.gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
flag"
Revert commit 159d8c274fd9 ("ACPI: Pass the same capabilities to the
_OSC regardless of the query flag") which caused legitimate usage
scenarios (when the platform firmware does not want the OS to control
certain platform features controlled by the system bus scope _OSC) to
break and was misguided by some misleading language in the _OSC
definition in the ACPI specification (in particular, Section 6.2.11.1.3
"Sequence of _OSC Calls" that contradicts other perts of the _OSC
definition).
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0iStA0JmO0H3z+VgQsVuQONVjKPpw0F5HKfiq=Gb6B5yw@mail.gmail.com
Reported-by: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a working
native and video interface. However the default detection mechanism first
registers the video interface before unregistering it again and switching
to the native interface during boot. This results in a dangling SBIOS
request for backlight change for some reason, causing the backlight to
switch to ~2% once per boot on the first power cord connect or disconnect
event. Setting the native interface explicitly circumvents this buggy
behaviour by avoiding the unregistering process.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ACPI specification says that OSPM should refuse to restore from
hibernate if the hardware signature changes, and should boot from
scratch. However, real BIOSes often vary the hardware signature in cases
where we *do* want to resume from hibernate, so Linux doesn't follow the
spec by default.
However, in a virtual environment there's no reason for the VMM to vary
the hardware signature *unless* it wants to trigger a clean reboot as
defined by the ACPI spec. So enable the check by default if a hypervisor
is detected.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Revert commit e38f9ff63e6d ("ACPI: scan: Do not add device IDs from _CID
if _HID is not valid"), because it has introduced regressions on
multiple systems, even though it only has effect on clearly invalid
firmware.
Reported-by: Pierre-Louis Bossart <notifications@github.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Now that the nd_namespace_blk infrastructure is removed, delete all the
region machinery to coordinate provisioning aliased capacity between
PMEM and BLK.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/164688418803.2879318.1302315202397235855.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Delete the code to parse interleave-descriptor-tables and coordinate I/O
through a BLK aperture.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/164688418240.2879318.400185926874596938.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
init_freq_invariance_cppc() was called in acpi_cppc_processor_probe(),
after CPU performance information and controls were populated from the
per-cpu _CPC objects.
But these _CPC objects provide information that helps with both CPU
(u-arch) and frequency invariance. Therefore, change the function name
to a more generic one, while adding the arch_ prefix, as this function
is expected to be defined differently by different architectures.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices
Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to
issue diagnostic dump and reset via an SDEI event or an interrupt.
This patch implements SDEI path.
[0] https://developer.arm.com/documentation/den0093/latest/
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add AGDI to the list of known ACPI table signatures to allow the
kernel to recognize it when upgrading tables via initrd.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Platforms with large BERT table data can trigger soft lockup errors
while attempting to print the entire BERT table data to the console at
boot:
watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1]
Observed on Ampere Altra systems with a single BERT record of ~250KB.
The original bert driver appears to have assumed relatively small table
data. Since it is impractical to reassemble large table data from
interwoven console messages, and the table data is available in
/sys/firmware/acpi/tables/data/BERT
limit the size for tables printed to the console to 1024 (for no reason
other than it seemed like a good place to kick off the discussion, would
appreciate feedback from existing users in terms of what size would
maintain their current usage model).
Alternatively, we could make printing a CONFIG option, use the
bert_disable boot arg (or something similar), or use a debug log level.
However, all those solutions require extra steps or change the existing
behavior for small table data. Limiting the size preserves existing
behavior on existing platforms with small table data, and eliminates the
soft lockups for platforms with large table data, while still making it
available.
Signed-off-by: Darren Hart <darren@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
__setup() handlers should return 1 to indicate that the boot option
has been handled. Returning 0 causes a boot option to be listed in
the Unknown kernel command line parameters and also added to init's
arg list (if no '=' sign) or environment list (if of the form 'a=b').
Unknown kernel command line parameters "erst_disable
bert_disable hest_disable BOOT_IMAGE=/boot/bzImage-517rc6", will be
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
erst_disable
bert_disable
hest_disable
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc6
Fixes: a3e2acc5e37b ("ACPI / APEI: Add Boot Error Record Table (BERT) support")
Fixes: a08f82d08053 ("ACPI, APEI, Error Record Serialization Table (ERST) support")
Fixes: 9dc966641677 ("ACPI, APEI, HEST table parsing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Yoga Tablet 1050F/L is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts (the Android x86
kernel fork ignores I2C devices described in the DSDT).
Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the
acpi_quirk_skip_dmi_ids table to woraround this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Nextbook Ares 8 is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts (the Android x86
kernel fork ignores I2C devices described in the DSDT).
Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the
acpi_quirk_skip_dmi_ids table to woraround this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc
Prevent acpi_ns_walk_namespace() from crashing when called with
start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been
instantiated yet and acpi_gbl_root_node is NULL.
For instance, this can happen if the kernel is run with "acpi=off"
in the command line.
Link: https://github.com/acpica/acpica/commit/b1c3656ef4950098e530be68d4b589584f06cddc
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0hJWW_vZ3wwajE7xT38aWjY7cZyvqMJpXHzUL98-SiCVQ@mail.gmail.com/
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ghes_init() sticks out in acpi_init() because it is the only functions
without an "acpi_" prefix.
Rename ghes_init with an "acpi_" prefix, then all looks fine.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|