| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates frim Marc Zyngier:
- More APCI fixes and improvements for the LoongArch architecture,
adding support for the HTVEC irqchip, suspend-resume, and some
PCI INTx workarounds
- Initial DT support for LoongArch. I'm not even kidding.
- Support for the MTK CIRQv2, a minor deviation from the original version
- Error handling fixes for wpcm450, GIC...
- BE detection for a FSL controller
- Declare the Sifive PLIC as wake-up agnostic
- Simplify fishing out the device data for the ST irqchip
- Mark some data structures as __initconst in the apple-aic driver
- Switch over from strtobool to kstrtobool
- COMPILE_TEST fixes
|
|
On LoongArch based systems, the PCI devices (e.g. SATA controllers and
PCI-to-PCI bridge controllers) in Loongson chipsets output high-level
interrupt signal to the interrupt controller they are connected (see
Loongson 7A1000 Bridge User Manual v2.00, sec 5.3, "For the bridge chip,
AC97 DMA interrupts are edge triggered, gpio interrupts can be configured
to be level triggered or edge triggered as needed, and the rest of the
interrupts are level triggered and active high."), while the IRQs are
active low from the perspective of PCI (see Conventional PCI spec r3.0,
sec 2.2.6, "Interrupts on PCI are optional and defined as level sensitive,
asserted low."), which means that the interrupt output of PCI devices plugged
into PCI-to-PCI bridges of Loongson chipset will be also converted to high-level.
So high level triggered type is required to be passed to acpi_register_gsi()
when creating mappings for PCI devices.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221022075955.11726-2-lvjianmin@loongson.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"The most important fixes here are a set of fixes for the ACPI
backlight detection refactor which landed in 6.1.
These fix regressions reported on some laptop models by making
acpi_video_backlight_use_native() always return true for now, which in
essence undoes some of the changes.
I plan to take another shot at having only 1 /sys/class/backlight
class device per panel with 6.2, with modified detection heuristics to
avoid the (known) regressions.
Highlights:
- ACPI: video: Fix regressions from 6.1 backlight refactor by making
acpi_video_backlight_use_native() always return true for now
- Misc other bugfixes and HW id additions"
* tag 'platform-drivers-x86-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: p2sb: Don't fail if unknown CPU is found
platform/x86/intel/hid: Add some ACPI device IDs
platform/x86/intel/pmt: Sapphire Rapids PMT errata fix
platform/x86: hp_wmi: Fix rfkill causing soft blocked wifi
platform/x86: touchscreen_dmi: Add info for the RCA Cambio W101 v2 2-in-1
platform/x86: ideapad-laptop: Disable touchpad_switch
ACPI: video: Add backlight=native DMI quirk for Dell G15 5515
ACPI: video: Make acpi_video_backlight_use_native() always return true
ACPI: video: Improve Chromebook checks
|
|
The Dell G15 5515 has the WMI interface (and WMI call returns) expected
by the nvidia-wmi-ec-backlight interface. But the backlight class device
registered by the nvidia-wmi-ec-backlight driver does not actually work.
The amdgpu_bl0 native GPU backlight class device does actually work,
add a backlight=native DMI quirk for this.
Reported-by: Iris <pawel.js@protonmail.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
- Add a comment that this needs to be revisited when dynamic-mux
support gets added (suggested by: Daniel Dadap)
|
|
Testing has shown that there are quite a few laptop models which rely
on native backlight control and which do not support ACPI video bus
backlight control, causing __acpi_video_get_backlight_type() to return
vendor. Known Windows laptop models affected by this are:
Acer Aspire 1640
HP Compaq nc6120
IBM ThinkPad X40
System76 Starling Star1
and the following MacBook models are affected too:
Apple MacBook 2.1
Apple MacBook 4.1
Apple MacBook Pro 7.1
the list of affected Windows laptop models is likely just the top of
the iceberg. So for now lets undo the change to not register native
backlight class devices when __acpi_video_get_backlight_type() != native.
Since as part of the backlight-detect refactor the detection code now
relies on the GPU drivers calling acpi_video_backlight_use_native() to
learn that native backlight support is available we cannot just remove
the acpi_video_backlight_use_native() calls from the GPU drivers.
Instead modify acpi_video_backlight_use_native() to always return true
for now. This is meant as a temporary work-around, which will be removed
again when the heuristics from __acpi_video_get_backlight_type() have
been improved so that they will return native on affected models.
Reported-by: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: John Warriner <taijitu@cox.net>
Reported-by: Scott Ostrander <sos12_3@hotmail.com>
Reported-by: Matthias Rampke <matthias.rampke@googlemail.com>
Reported-by: Milan Hodoscek <hmilan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
2 improvements for the Chromebook handling in
acpi_video_get_backlight_type():
1. Also check for the "GOOG000C" ACPI HID used on some models
2. Move the Chromebook check to above the ACPI-video check normally
Chromebooks don't have ACPI video backlight support, but when
flashed with upstream coreboot builds they may have ACPI video
backlight support, but native should still be used/preferred then.
Suggested-by: Mr. Chromebox <mrchromebox@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"Several fixes for CXL region creation crashes, leaks and failures.
This is mainly fallout from the original implementation of dynamic CXL
region creation (instantiate new physical memory pools) that arrived
in v6.0-rc1.
Given the theme of "failures in the presence of pass-through decoders"
this also includes new regression test infrastructure for that case.
Summary:
- Fix region creation crash with pass-through decoders
- Fix region creation crash when no decoder allocation fails
- Fix region creation crash when scanning regions to enforce the
increasing physical address order constraint that CXL mandates
- Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
1:1 memory-device-to-region associations.
- Fix a memory leak for cxl_region objects when regions with active
targets are deleted
- Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
emulated proximity domains.
- Fix region creation failure for switch attached devices downstream
of a single-port host-bridge
- Fix false positive memory leak of cxl_region objects by recycling
recently used region ids rather than freeing them
- Add regression test infrastructure for a pass-through decoder
configuration
- Fix some mailbox payload handling corner cases"
* tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Recycle region ids
cxl/region: Fix 'distance' calculation with passthrough ports
tools/testing/cxl: Add a single-port host-bridge regression config
tools/testing/cxl: Fix some error exits
cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
cxl/region: Fix cxl_region leak, cleanup targets at region delete
cxl/region: Fix region HPA ordering validation
cxl/pmem: Use size_add() against integer overflow
cxl/region: Fix decoder allocation crash
ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set
cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA.
cxl/region: Fix null pointer dereference due to pass through decoder commit
cxl/mbox: Add a check on input payload size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Add StorageD3Enable quirk for Dell Inspiron 16 5625 (Mario
Limonciello)"
* tag 'acpi-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: Add another system to quirk list for forcing StorageD3Enable
|
|
* acpi-x86:
ACPI: x86: Add another system to quirk list for forcing StorageD3Enable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and device properties fixes from Rafael Wysocki:
"These fix device properties documentation and the ACPI PCC code, add a
new IRQ override quirk for resource handling and add one more item to
the list of device IDs to be ignored when returned by _DEP.
Specifics:
- Fix the documentation of the *_match_string() family of functions
to properly cover the return value (Andy Shevchenko)
- Fix a possible integer overflow during multiplication in the ACPI
PCC code (Manank Patel)
- Make the ACPI device resources code skip IRQ override on Asus
Vivobook S5602ZA (Tamim Khan)
- Add LATT2021 to the list of device IDs that are ignored when
returned by _DEP, because there are no drivers for them in the
kernel and no plans to add such drivers (Hans de Goede)"
* tag 'acpi-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Add LATT2021 to acpi_ignore_dep_ids[]
ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA
ACPI: PCC: Fix unintentional integer overflow
device property: Fix documentation for *_match_string() APIs
|
|
commit 018d6711c26e4 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.
Julius Brockmann reports that Inspiron 16 5625 suffers that same symptoms.
Add this other system to the list as well.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216440
Reported-and-tested-by: Julius Brockmann <mail@juliusbrockmann.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge an IRQ override quirk, an ACPI PCC code fix and a device
properties documentation update for 6.1-rc3:
- Make the ACPI device resources code skip IRQ override on Asus
Vivobook S5602ZA (Tamim Khan).
- Fix a possible integer overflow during multiplication in the ACPI
PCC code (Manank Patel).
- Fix the documentation of the *_match_string() family of functions to
properly cover the return value (Andy Shevchenko).
* acpi-resource:
ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA
* acpi-pcc:
ACPI: PCC: Fix unintentional integer overflow
* devprop:
device property: Fix documentation for *_match_string() APIs
|
|
Some x86/ACPI laptops with MIPI cameras have a LATT2021 ACPI device
in the _DEP dependency list of the ACPI devices for the camera-sensors
(which have flags.honor_deps set).
The _DDN for the LATT2021 device is "Lattice FW Update Client Driver",
suggesting that this is used for firmware updates of something. There
is no Linux driver for this and if Linux gets support for updates it
will likely be in userspace through fwupd.
For now add the LATT2021 HID to acpi_ignore_dep_ids[] so that
acpi_dev_ready_for_enumeration() will return true once the other _DEP
dependencies are met.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Like the Asus Vivobook K3402ZA/K3502ZA/S5402ZA Asus Vivobook S5602ZA
has an ACPI DSDT table the describes IRQ 1 as ActiveLow while the kernel
overrides it to Edge_High. This prevents the keyboard on this laptop
from working. To fix this add this laptop to the skip_override_table so
that the kernel does not override IRQ 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216579
Tested-by: Dzmitry <wrkedm@gmail.com>
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix an unintentional u32 overflow by changing PCC_CMD_WAIT_RETRIES_NUM
to 500ULL.
Fixes: 91cefefb6991 ("ACPI: PCC: replace wait_for_completion()")
Signed-off-by: Manank Patel <pmanank200502@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"The only thing which stands out is a fix for a backlight regression on
Chromebooks (under drivers/acpi, with ack from Rafael).
Other then that nothing special to report just various small fixes and
hardware-id additions"
* tag 'platform-drivers-x86-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
ACPI: video: Fix missing native backlight on Chromebooks
platform/x86/intel: pmc/core: Add Raptor Lake support to pmc core driver
leds: simatic-ipc-leds-gpio: fix incorrect LED to GPIO mapping
platform/x86/amd: pmc: Read SMU version during suspend on Cezanne systems
platform/x86: thinkpad_acpi: Fix reporting a non present second fan on some models
platform/x86: asus-wmi: Add support for ROG X16 tablet mode
|
|
Chromebooks don't have backlight in ACPI table, they suppose to use
native backlight in this case. Check presence of the CrOS embedded
controller ACPI device and prefer the native backlight if EC found.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: 2600bfa3df99 ("ACPI: video: Add acpi_video_backlight_use_native() helper")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20221024141210.67784-1-dmitry.osipenko@collabora.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix issues introduced during this merge window (ACPI/PCI, device
enumeration and documentation) and some other ones found recently.
Specifics:
- Add missing device reference counting to acpi_get_pci_dev() after
changing it recently (Rafael Wysocki)
- Fix resource list walk in acpi_dma_get_range() (Robin Murphy)
- Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
override warning message (Jiri Slaby)
- Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra)
- Fix multiple error records handling in one of the ACPI extlog
driver code paths (Tony Luck)
- Prune DSDT override documentation from index after dropping it
(Bagas Sanjaya)"
* tag 'acpi-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Fix DMA range assignment
ACPI: PCI: Fix device reference counting in acpi_get_pci_dev()
ACPI: resource: note more about IRQ override
ACPI: resource: do IRQ override on LENOVO IdeaPad
ACPI: extlog: Handle multiple records
ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()
Documentation: ACPI: Prune DSDT override documentation from index
|
|
The ACPI CEDT.CFMWS indicates a range of possible address where new CXL
regions can appear. Each range is associated with a QTG id (QoS
Throttling Group id). For each range + QTG pair that is not covered by a proximity
domain in the SRAT, Linux creates a new NUMA node. However, the commit
that added the new ranges missed updating the node_possible mask which
causes memory_group_register() to fail. Add the new nodes to the
nodes_possible mask.
Cc: <stable@vger.kernel.org>
Fixes: fd49f99c1809 ("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT")
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166631003537.1167078.9373680312035292395.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
'acpi-docs'
Merge assorted ACPI fixes for 6.1-rc2:
- Fix resource list walk in acpi_dma_get_range() (Robin Murphy).
- Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
override warning message (Jiri Slaby).
- Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra).
- Fix multiple error records handling in one of the ACPI extlog driver
code paths (Tony Luck).
- Prune DSDT override documentation from index after dropping it (Bagas
Sanjaya).
* acpi-scan:
ACPI: scan: Fix DMA range assignment
* acpi-resource:
ACPI: resource: note more about IRQ override
ACPI: resource: do IRQ override on LENOVO IdeaPad
* acpi-apei:
ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()
* acpi-extlog:
ACPI: extlog: Handle multiple records
* acpi-docs:
Documentation: ACPI: Prune DSDT override documentation from index
|
|
Add gfp parameter to iommu_alloc_resv_region() for the callers to specify
the memory allocation behavior. Thus iommu_alloc_resv_region() could also
be available in critical contexts.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220927053109.4053662-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Assigning the device's dma_range_map from the iterator variable after
the loop means it always points to the empty terminator at the end of
the map, which is not what we want. Similarly, freeing the iterator on
error when it points to somwhere in the middle of the allocated array
won't work either. Fix this.
Fixes: bf2ee8d0c385 ("ACPI: scan: Support multiple DMA windows with different offsets")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jianmin Lv <lvjianmin@loongson.cn>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 63f534b8bad9 ("ACPI: PCI: Rework acpi_get_pci_dev()") failed
to reference count the device returned by acpi_get_pci_dev() as
expected by its callers which in some cases may cause device objects
to be dropped prematurely.
Add the missing get_device() to acpi_get_pci_dev().
Fixes: 63f534b8bad9 ("ACPI: PCI: Rework acpi_get_pci_dev()")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use an exclamation mark to note which of the properties was overridden.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
LENOVO IdeaPad Flex 5 is ryzen-5 based and the commit below removed IRQ
overriding for those. This broke touchscreen and trackpad:
i2c_designware AMDI0010:00: controller timed out
i2c_designware AMDI0010:03: controller timed out
i2c_hid_acpi i2c-MSFT0001:00: failed to reset device: -61
i2c_designware AMDI0010:03: controller timed out
...
i2c_hid_acpi i2c-MSFT0001:00: can't add hid device: -61
i2c_hid_acpi: probe of i2c-MSFT0001:00 failed with error -61
White-list this specific model in the override_table.
For this to work, the ZEN test needs to be put below the table walk.
Fixes: 37c81d9f1d1b (ACPI: resource: skip IRQ override on AMD Zen platforms)
Link: https://bugzilla.suse.com/show_bug.cgi?id=1203794
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If there is no user space consumer of extlog_mem trace records, then
Linux properly handles multiple error records in an ELOG block
extlog_print()
print_extlog_rcd()
__print_extlog_rcd()
cper_estatus_print()
apei_estatus_for_each_section()
But the other code path hard codes looking for a single record to
output a trace record.
Fix by using the same apei_estatus_for_each_section() iterator
to step over all records.
Fixes: 2dfb7d51a61d ("trace, RAS: Add eMCA trace event interface")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Change num_ghes from int to unsigned int, preventing an overflow
and causing subsequent vmalloc() to fail.
The overflow happens in ghes_estatus_pool_init() when calculating
len during execution of the statement below as both multiplication
operands here are signed int:
len += (num_ghes * GHES_ESOURCE_PREALLOC_MAX_SIZE);
The following call trace is observed because of this bug:
[ 9.317108] swapper/0: vmalloc error: size 18446744071562596352, exceeds total pages, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0-1
[ 9.317131] Call Trace:
[ 9.317134] <TASK>
[ 9.317137] dump_stack_lvl+0x49/0x5f
[ 9.317145] dump_stack+0x10/0x12
[ 9.317146] warn_alloc.cold+0x7b/0xdf
[ 9.317150] ? __device_attach+0x16a/0x1b0
[ 9.317155] __vmalloc_node_range+0x702/0x740
[ 9.317160] ? device_add+0x17f/0x920
[ 9.317164] ? dev_set_name+0x53/0x70
[ 9.317166] ? platform_device_add+0xf9/0x240
[ 9.317168] __vmalloc_node+0x49/0x50
[ 9.317170] ? ghes_estatus_pool_init+0x43/0xa0
[ 9.317176] vmalloc+0x21/0x30
[ 9.317177] ghes_estatus_pool_init+0x43/0xa0
[ 9.317179] acpi_hest_init+0x129/0x19c
[ 9.317185] acpi_init+0x434/0x4a4
[ 9.317188] ? acpi_sleep_proc_init+0x2a/0x2a
[ 9.317190] do_one_initcall+0x48/0x200
[ 9.317195] kernel_init_freeable+0x221/0x284
[ 9.317200] ? rest_init+0xe0/0xe0
[ 9.317204] kernel_init+0x1a/0x130
[ 9.317205] ret_from_fork+0x22/0x30
[ 9.317208] </TASK>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix two issues, in APEI and in the int3472 driver, clean up the
ACPI thermal driver, add ACPI support for non-GPE system wakeup events
and make the system reboot code use the S5 (system off) state by
default.
Specifics:
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more
consistent and drop redundant code from it (Rafael Wysocki)"
* tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
platform/x86: int3472: Don't leak reference on error
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- remove the bus_set_iommu() interface which became unnecesary because
of IOMMU per-device probing
- make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- support for AMD IOMMUv2 page-tables for the DMA-API layer.
The v2 page-tables are compatible with the x86 CPU page-tables. Using
them for DMA-API prepares support for hardware-assisted IOMMU
virtualization
- support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- some smaller fixes and cleanups
* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
iommu/vt-d: Avoid unnecessary global DMA cache invalidation
iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
iommu/vt-d: Remove pasid_set_eafe()
iommu/vt-d: Decouple PASID & PRI enabling from SVA
iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
iommu: dart: Support t6000 variant
iommu/io-pgtable-dart: Add DART PTE support for t6000
iommu/io-pgtable: Add DART subpage protection support
iommu/io-pgtable: Move Apple DART support to its own file
iommu/mediatek: Add support for MT6795 Helio X10 M4Us
iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
dt-bindings: mediatek: Add bindings for MT6795 M4U
iommu/iova: Fix module config properly
iommu/amd: Fix sparse warning
iommu/amd: Remove outdated comment
iommu/amd: Free domain ID after domain_flush_pages
iommu/amd: Free domain id in error path
iommu/virtio: Fix compile error with viommu_capable()
...
|
|
Merge additional APEI changes, ACPI updates related to device wakeup and
system restart and ACPI thermal driver cleanups for 6.1-rc1:
- Fix a memory leak in APEI by avoiding to add do not add task_work to
kernel threads running when an asynchronous error is detected (Shuai
Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more consistent
and drop redundant code from it (Rafael Wysocki).
* acpi-apei:
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
* acpi-wakeup:
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
* acpi-reboot:
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
* acpi-thermal:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
Freezer:
- Rewrite the core freezer to behave better wrt thawing and be
simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
fixing/adjusting all the fallout.
Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() &
replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications"
* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
sched: Fix more TASK_state comparisons
sched: Fix TASK_state comparisons
sched/fair: Move call to list_last_entry() in detach_tasks
sched/fair: Cleanup loop_max and loop_break
sched/fair: Make sure to try to detach at least one movable task
sched: Show PF_flag holes
freezer,sched: Rewrite core freezer logic
sched: Widen TAKS_state literals
sched/wait: Add wait_event_state()
sched/completion: Add wait_for_completion_state()
sched: Add TASK_ANY for wait_task_inactive()
sched: Change wait_task_inactive()s match_state
freezer,umh: Clean up freezer/initrd interaction
freezer: Have {,un}lock_system_sleep() save/restore flags
sched: Rename task_running() to task_on_cpu()
sched/fair: Cleanup for SIS_PROP
sched/fair: Default to false in test_idle_cores()
sched/fair: Remove useless check in select_idle_core()
sched/fair: Avoid double search on same cpu
sched/fair: Remove redundant check in select_idle_smt()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF
support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we
only register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
* tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits)
platform/x86: use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd: pmc: Dump idle mask during "check" stage instead
platform/x86/intel/wmi: thunderbolt: Use dev_groups callback
platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks
platform/surface: Split memcpy() of struct ssam_event flexible array
platform/x86: compal-laptop: Get rid of a few forward declarations
platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf()
platform/x86: dell-smbios-base: Use sysfs_emit()
platform/x86/amd/pmf: Remove unused power_delta instances
platform/x86/amd/pmf: install notify handler after acpi init
Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF
platform/x86/amd/pmf: Add sysfs to toggle CnQF
platform/x86/amd/pmf: Add support for CnQF
platform/x86/amd: pmc: Fix build without debugfs
platform/x86: hp-wmi: Support touchpad on/off
platform/x86: int3472/discrete: Drop a forward declaration
platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static
platform/x86: wmi: Drop forward declaration of static functions
platform/x86: toshiba_acpi: Remove duplicate include
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
...
|
|
Drop some redundant initialization of local variables, a redundant
return statement and a redundant "else" from the ACPI thermal driver.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Some expressions in the ACPI thermal driver contain redundant
parentheses. Drop them.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The usage of white space in the ACPI thermal driver is not very
consistent, so improve that a bit.
While at it, add missing braces to if()/else in a few places.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
If an error is detected as a result of user-space process accessing a
corrupt memory location, the CPU may take an abort. Then the platform
firmware reports kernel via NMI like notifications, e.g. NOTIFY_SEA,
NOTIFY_SOFTWARE_DELEGATED, etc.
For NMI like notifications, commit 7f17b4a121d0 ("ACPI: APEI: Kick the
memory_failure() queue for synchronous errors") keep track of whether
memory_failure() work was queued, and make task_work pending to flush out
the queue so that the work is processed before return to user-space.
The code use init_mm to check whether the error occurs in user space:
if (current->mm != &init_mm)
The condition is always true, becase _nobody_ ever has "init_mm" as a real
VM any more.
In addition to abort, errors can also be signaled as asynchronous
exceptions, such as interrupt and SError. In such case, the interrupted
current process could be any kind of thread. When a kernel thread is
interrupted, the work ghes_kick_task_work deferred to task_work will never
be processed because entry_handler returns to call ret_to_kernel() instead
of ret_to_user(). Consequently, the estatus_node alloced from
ghes_estatus_pool in ghes_in_nmi_queue_one_entry() will not be freed.
After around 200 allocations in our platform, the ghes_estatus_pool will
run of memory and ghes_in_nmi_queue_one_entry() returns ENOMEM. As a
result, the event failed to be processed.
sdei: event 805 on CPU 113 failed with error: -2
Finally, a lot of unhandled events may cause platform firmware to exceed
some threshold and reboot.
The condition should generally just do
if (current->mm)
as described in active_mm.rst documentation.
Then if an asynchronous error is detected when a kernel thread is running,
(e.g. when detected by a background scrubber), do not add task_work to it
as the original patch intends to do.
Fixes: 7f17b4a121d0 ("ACPI: APEI: Kick the memory_failure() queue for synchronous errors")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit d60cd06331a3 ("PM: ACPI: reboot: Use S5 for reboot") caused Dell
PowerEdge r440 hangs at reboot.
The issue is fixed by commit 2ca1c94ce0b6 ("tg3: Disable tg3 device on
system reboot to avoid triggering AER"), so use the new sysoff API to
reinstate S5 for reboot on ACPI-based systems.
Using S5 for reboot is default behavior under Windows: "A full shutdown
(S5) occurs when a system restart is requested" [1].
Link: https://docs.microsoft.com/en-us/windows/win32/power/system-power-state # [1]
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This change adds support for ACPI devices that use ExclusiveAndWake or
SharedAndWake in their _CRS GpioInt definition (instead of using _PRW),
and also provide power resources. Previously the ACPI subsystem had no
idea if the device had a wake capable interrupt armed. This resulted
in the ACPI device PM system placing the device into D3Cold, and thus
cutting power to the device. With this change we will now query the
_S0W method to figure out the appropriate wake capable D-state.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPI IRQ/Interrupt resources contain a bit that describes if the
interrupt should wake the system. This change exposes that bit via
a new IORESOURCE_IRQ_WAKECAPABLE flag. Drivers should check this flag
before arming an IRQ to wake the system.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"ACPI and PNP updates for 6.1-rc1.
These rearrange the ACPI device object initialization code (to get rid
of a redundant parent pointer from struct acpi_device among other
things), unify the _UID handling, drop support for some _OSI strings
that should not be necessary any more, add new IDs to support more
hardware and some more quirks, fix a few issues and clean up code all
over.
Specifics:
- Reimplement acpi_get_pci_dev() using the list of physical devices
associated with the given ACPI device object (Rafael Wysocki)
- Rename ACPI device object reference counting functions (Rafael
Wysocki)
- Rearrange ACPI device object initialization code (Rafael Wysocki)
- Drop parent field from struct acpi_device (Rafael Wysocki)
- Extend the the int3472-tps68470 driver to support multiple
consumers of a single TPS68470 along with the requisite
framework-level support (Daniel Scally)
- Filter out non-memory resources in is_memory(), add a helper
function to find all memory type resources of an ACPI device object
and use that function in 3 places (Heikki Krogerus)
- Add IRQ override quirks for Asus Vivobook K3402ZA/K3502ZA and ASUS
model S5402ZA (Tamim Khan, Kellen Renshaw)
- Fix acpi_dev_state_d0() kerneldoc (Sakari Ailus)
- Fix up suspend-to-idle support on ASUS Rembrandt laptops (Mario
Limonciello)
- Clean up ACPI platform devices support code (Andy Shevchenko, John
Garry)
- Clean up ACPI bus management code (Andy Shevchenko, ye xingchen)
- Add support for multiple DMA windows with different offsets to the
ACPI device enumeration code and use it on LoongArch (Jianmin Lv)
- Clean up the ACPI LPSS (Intel SoC) driver (Andy Shevchenko)
- Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable (Mario
Limonciello)
- Drop unused dev_fmt() and redundant 'HMAT' prefix from the HMAT
parsing code (Liu Shixin)
- Make ACPI FPDT parsing code avoid calling acpi_os_map_memory() on
invalid physical addresses (Hans de Goede)
- Silence missing-declarations warning related to Apple device
properties management (Lukas Wunner)
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton)
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan)
- Fix Tx acknowledge in the PCC address space handler (Huisong Li)
- Use wait_for_completion_timeout() for PCC mailbox operations
(Huisong Li)
- Release resources on PCC address space setup failure path (Rafael
Mendonca)
- Remove unneeded result variables from APEI code (ye xingchen)
- Print total number of records found during BERT log parsing (Dmitry
Monakhov)
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello)
- Drop unneeded result variable from ec_write() (ye xingchen)
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver
(Hanjun Guo)
- Reorder symbols to get rid of a few forward declarations in the
ACPI fan driver (Uwe Kleine-König)
- Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid
Norlander)
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam)
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki)
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang)
- Do not initialize ret in main() in the pfrut utility (Shi junming)
- Drop useless ACPI DSDT override documentation (Rafael Wysocki)
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare)
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into
an integer value (Andy Shevchenko)
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko)
- Drop unused pnpid32_to_pnpid() declaration from PNP code (Gaosheng
Cui)"
* tag 'acpi-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (79 commits)
ACPI: LPSS: Deduplicate skipping device in acpi_lpss_create_device()
ACPI: LPSS: Replace loop with first entry retrieval
ACPI: x86: s2idle: Add another ID to s2idle_dmi_table
ACPI: x86: s2idle: Fix a NULL pointer dereference
MAINTAINERS: Drop records pointing to 01.org/linux-acpi
ACPI: Kconfig: Drop link to https://01.org/linux-acpi
ACPI: docs: Drop useless DSDT override documentation
ACPI: DPTF: Drop stale link from Kconfig help
ACPI: x86: s2idle: Add a quirk for ASUSTeK COMPUTER INC. ROG Flow X13
ACPI: x86: s2idle: Add a quirk for Lenovo Slim 7 Pro 14ARH7
ACPI: x86: s2idle: Add a quirk for ASUS ROG Zephyrus G14
ACPI: x86: s2idle: Add a quirk for ASUS TUF Gaming A17 FA707RE
ACPI: x86: s2idle: Add module parameter to prefer Microsoft GUID
ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt
ACPI: x86: s2idle: Move _HID handling for AMD systems into structures
platform/x86: int3472: Add board data for Surface Go2 IR camera
platform/x86: int3472: Support multiple gpio lookups in board data
platform/x86: int3472: Support multiple clock consumers
ACPI: bus: Add iterator for dependent devices
ACPI: scan: Add acpi_dev_get_next_consumer_dev()
...
|
|
Merge ACPI _UID handling unification changes for 6.1-rc1:
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into an
integer value (Andy Shevchenko).
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko).
* acpi-uid:
efi/dev-path-parser: Refactor _UID handling to use acpi_dev_uid_to_integer()
spi: pxa2xx: Refactor _UID handling to use acpi_dev_uid_to_integer()
perf: qcom_l2_pmu: Refactor _UID handling to use acpi_dev_uid_to_integer()
i2c: mlxbf: Refactor _UID handling to use acpi_dev_uid_to_integer()
i2c: amd-mp2-plat: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: x86: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: LPSS: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: utils: Add acpi_dev_uid_to_integer() helper to get _UID as integer
|
|
Merge miscellaneous ACPI material, ACPI tools changes and ACPI
documentation updates for 6.1-rc1:
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki).
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang).
- Do not initialize ret in main() in the pfrut utility (Shi junming).
- Drop useless ACPI DSDT override documentation (Rafael Wysocki).
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare).
* acpi-misc:
MAINTAINERS: Drop records pointing to 01.org/linux-acpi
ACPI: Kconfig: Drop link to https://01.org/linux-acpi
ACPI: DPTF: Drop stale link from Kconfig help
ACPI: move from strlcpy() with unused retval to strscpy()
* acpi-tools:
ACPI: tools: pfrut: Do not initialize ret in main()
* acpi-docs:
ACPI: docs: Drop useless DSDT override documentation
ACPI: docs: enumeration: Fix a few typos and wording mistakes
|
|
Merge EC, AC, fan and backlight driver changes and ACPI AMBA support
update for 6.1-rc1:
- Drop unneeded result variable from ec_write() (ye xingchen).
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver (Hanjun
Guo).
- Reorder symbols to get rid of a few forward declarations in the ACPI
fan driver (Uwe Kleine-König).
- Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid
Norlander).
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam).
* acpi-ec:
ACPI: EC: Drop unneeded result variable from ec_write()
* acpi-ac:
ACPI: AC: Remove the leftover struct acpi_ac_bl
* acpi-fan:
ACPI: fan: Reorder symbols to get rid of a few forward declarations
* acpi-video:
ACPI: video: Add Toshiba Satellite/Portege Z830 quirk
* acpi-amba:
ACPI: AMBA: Add ARM DMA-330 controller to the supported list
|
|
Merge new material related to CPPC, PCC, APEI and OSI strings handling
for 6.1-rc1:
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton).
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan).
- Fix Tx acknowledge in the PCC address space handler (Huisong Li).
- Use wait_for_completion_timeout() for PCC mailbox operations (Huisong
Li).
- Release resources on PCC address space setup failure path (Rafael
Mendonca).
- Remove unneeded result variables from APEI code (ye xingchen).
- Print total number of records found during BERT log parsing (Dmitry
Monakhov).
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello).
* acpi-cppc:
ACPI: CPPC: Disable FIE if registers in PCC regions
ACPI: CPPC: Add ACPI disabled check to acpi_cpc_valid()
* acpi-pcc:
ACPI: PCC: Fix Tx acknowledge in the PCC address space handler
ACPI: PCC: replace wait_for_completion()
ACPI: PCC: Release resources on address space setup failure path
* acpi-apei:
ACPI: APEI: Remove unneeded result variables
ACPI: APEI: Add BERT error log footer
* acpi-osi:
ACPI: OSI: Update Documentation on custom _OSI strings
ACPI: OSI: Remove Linux-HPI-Hybrid-Graphics _OSI string
ACPI: OSI: Remove Linux-Lenovo-NV-HDMI-Audio _OSI string
ACPI: OSI: Remove Linux-Dell-Video _OSI string
|
|
Merge changes related to ACPI data-only tables handling and ACPI device
properties management, x86-specific ACPI code changes and ACPI SoC driver
changes for 6.1-rc1:
- Clean up the ACPI LPSS (Intel SoC) driver (Andy Shevchenko).
- Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable (Mario
Limonciello).
- Drop unused dev_fmt() and redundant 'HMAT' prefix from the HMAT
parsing code (Liu Shixin).
- Make ACPI FPDT parsing code avoid calling acpi_os_map_memory() on
invalid physical addresses (Hans de Goede).
- Silence missing-declarations warning related to Apple device
properties management (Lukas Wunner).
* acpi-properties:
ACPI: property: Silence missing-declarations warning in apple.c
* acpi-tables:
ACPI: HMAT: Drop unused dev_fmt() and redundant 'HMAT' prefix
ACPI: tables: FPDT: Don't call acpi_os_map_memory() on invalid phys address
* acpi-x86:
ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable
* acpi-soc:
ACPI: LPSS: Deduplicate skipping device in acpi_lpss_create_device()
ACPI: LPSS: Replace loop with first entry retrieval
|
|
Add a new label to deduplicate skipping device code in the
acpi_lpss_create_device(). No functional change intended.
While at it, convert the last conditional to use the classical
pattern, i.e.
if (err)
...handle err...
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After the commit 6505e452371d ("ACPI: LPSS: Use the helper
acpi_dev_get_memory_resources()") the list is empty or
contains only resource of IORESOURCE_MEM type. Hence, no
need to check for the type, and since we break after the
first found, no need to iterate over full list. That said,
replace loop with first entry retrieval.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge changes related to ACPI device enumeration and ACPI support for
platform devices for 6.1-rc1:
- Clean up ACPI platform devices support code (Andy Shevchenko, John
Garry).
- Clean up ACPI bus management code (Andy Shevchenko, ye xingchen).
- Add support for multiple DMA windows with different offsets to the
ACPI device enumeration code and use it on LoongArch (Jianmin Lv).
* acpi-scan:
LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA
ACPI: scan: Support multiple DMA windows with different offsets
* acpi-bus:
ACPI: bus: Refactor ACPI matching functions for better readability
ACPI: bus: Drop kernel doc annotation from acpi_bus_notify()
ACPI: bus: Remove the unneeded result variable
* acpi-platform:
ACPI: platform: Use PLATFORM_DEVID_NONE in acpi_create_platform_device()
ACPI: platform: Sort forbidden_id_list[] in ascending order
ACPI: platform: Use sizeof(*pointer) instead of sizeof(type)
ACPI: platform: Remove redundant print on -ENOMEM
ACPI: platform: Get rid of redundant 'else'
|
|
Merge ACPI resource management and ACPI power management chages for
6.1-rc1:
- Filter out non-memory resources in is_memory(), add a helper
function to find all memory type resources of an ACPI device object
and use that function in 3 places (Heikki Krogerus).
- Add IRQ override quirks for Asus Vivobook K3402ZA/K3502ZA and ASUS
model S5402ZA (Tamim Khan, Kellen Renshaw).
- Fix acpi_dev_state_d0() kerneldoc (Sakari Ailus).
- Fix up suspend-to-idle support on ASUS Rembrandt laptops (Mario
Limonciello).
* acpi-resource:
ACPI: resource: Add ASUS model S5402ZA to quirks
usb: typec: intel_pmc_mux: Use the helper acpi_dev_get_memory_resources()
ACPI: resource: Skip IRQ override on Asus Vivobook K3402ZA/K3502ZA
ACPI: LPSS: Use the helper acpi_dev_get_memory_resources()
ACPI: APD: Use the helper acpi_dev_get_memory_resources()
ACPI: resource: Add helper function acpi_dev_get_memory_resources()
ACPI: resource: Filter out the non memory resources in is_memory()
* acpi-pm:
ACPI: x86: s2idle: Add another ID to s2idle_dmi_table
ACPI: x86: s2idle: Fix a NULL pointer dereference
ACPI: x86: s2idle: Add a quirk for ASUSTeK COMPUTER INC. ROG Flow X13
ACPI: x86: s2idle: Add a quirk for Lenovo Slim 7 Pro 14ARH7
ACPI: x86: s2idle: Add a quirk for ASUS ROG Zephyrus G14
ACPI: x86: s2idle: Add a quirk for ASUS TUF Gaming A17 FA707RE
ACPI: x86: s2idle: Add module parameter to prefer Microsoft GUID
ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt
ACPI: x86: s2idle: Move _HID handling for AMD systems into structures
ACPI: PM: Fix acpi_dev_state_d0() kerneldoc
|
|
Merge changes regarding the management of ACPI device objects for
6.1-rc1:
- Rename ACPI device object reference counting functions (Rafael
Wysocki).
- Rearrange ACPI device object initialization code (Rafael Wysocki).
- Drop parent field from struct acpi_device (Rafael Wysocki).
- Extend the the int3472-tps68470 driver to support multiple consumers
of a single TPS68470 along with the requisite framework-level
support (Daniel Scally).
* acpi-dev:
platform/x86: int3472: Add board data for Surface Go2 IR camera
platform/x86: int3472: Support multiple gpio lookups in board data
platform/x86: int3472: Support multiple clock consumers
ACPI: bus: Add iterator for dependent devices
ACPI: scan: Add acpi_dev_get_next_consumer_dev()
ACPI: property: Use acpi_dev_parent()
ACPI: Drop redundant acpi_dev_parent() header
ACPI: PM: Fix NULL argument handling in acpi_device_get/set_power()
ACPI: Drop parent field from struct acpi_device
ACPI: scan: Eliminate __acpi_device_add()
ACPI: scan: Rearrange initialization of ACPI device objects
ACPI: scan: Rename acpi_bus_get_parent() and rearrange it
ACPI: Rename acpi_bus_get/put_acpi_device()
|
