summaryrefslogtreecommitdiff
path: root/crypto/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2024-06-07crypto: sm2 - Remove sm2 algorithmHerbert Xu1-8/+0
The SM2 algorithm has a single user in the kernel. However, it's never been integrated properly with that user: asymmetric_keys. The crux of the issue is that the way it computes its digest with sm3 does not fit into the architecture of asymmetric_keys. As no solution has been proposed, remove this algorithm. It can be resubmitted when it is integrated properly into the asymmetric_keys subsystem. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-15Merge tag 'net-next-6.10' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Complete rework of garbage collection of AF_UNIX sockets. AF_UNIX is prone to forming reference count cycles due to fd passing functionality. New method based on Tarjan's Strongly Connected Components algorithm should be both faster and remove a lot of workarounds we accumulated over the years. - Add TCP fraglist GRO support, allowing chaining multiple TCP packets and forwarding them together. Useful for small switches / routers which lack basic checksum offload in some scenarios (e.g. PPPoE). - Support using SMP threads for handling packet backlog i.e. packet processing from software interfaces and old drivers which don't use NAPI. This helps move the processing out of the softirq jumble. - Continue work of converting from rtnl lock to RCU protection. Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link information available via rtnetlink. - Small optimizations from Eric to UDP wake up handling, memory accounting, RPS/RFS implementation, TCP packet sizing etc. - Allow direct page recycling in the bulk API used by XDP, for +2% PPS. - Support peek with an offset on TCP sockets. - Add MPTCP APIs for querying last time packets were received/sent/acked and whether MPTCP "upgrade" succeeded on a TCP socket. - Add intra-node communication shortcut to improve SMC performance. - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver. - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver. - Add reset reasons for tracing what caused a TCP reset to be sent. - Introduce direction attribute for xfrm (IPSec) states. State can be used either for input or output packet processing. Things we sprinkled into general kernel code: - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS(). This required touch-ups and renaming of a few existing users. - Add Endian-dependent __counted_by_{le,be} annotations. - Make building selftests "quieter" by printing summaries like "CC object.o" rather than full commands with all the arguments. Netfilter: - Use GFP_KERNEL to clone elements, to deal better with OOM situations and avoid failures in the .commit step. BPF: - Add eBPF JIT for ARCv2 CPUs. - Support attaching kprobe BPF programs through kprobe_multi link in a session mode, meaning, a BPF program is attached to both function entry and return, the entry program can decide if the return program gets executed and the entry program can share u64 cookie value with return program. "Session mode" is a common use-case for tetragon and bpftrace. - Add the ability to specify and retrieve BPF cookie for raw tracepoint programs in order to ease migration from classic to raw tracepoints. - Add an internal-only BPF per-CPU instruction for resolving per-CPU memory addresses and implement support in x86, ARM64 and RISC-V JITs. This allows inlining functions which need to access per-CPU state. - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various atomics in bpf_arena which can be JITed as a single x86 instruction. Support BPF arena on ARM64. - Add a new bpf_wq API for deferring events and refactor process-context bpf_timer code to keep common code where possible. - Harden the BPF verifier's and/or/xor value tracking. - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs. - Support bpf_tail_call_static() helper for BPF programs with GCC 13. - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF program to have code sections where preemption is disabled. Driver API: - Skip software TC processing completely if all installed rules are marked as HW-only, instead of checking the HW-only flag rule by rule. - Add support for configuring PoE (Power over Ethernet), similar to the already existing support for PoDL (Power over Data Line) config. - Initial bits of a queue control API, for now allowing a single queue to be reset without disturbing packet flow to other queues. - Common (ethtool) statistics for hardware timestamping. Tests and tooling: - Remove the need to create a config file to run the net forwarding tests so that a naive "make run_tests" can exercise them. - Define a method of writing tests which require an external endpoint to communicate with (to send/receive data towards the test machine). Add a few such tests. - Create a shared code library for writing Python tests. Expose the YAML Netlink library from tools/ to the tests for easy Netlink access. - Move netfilter tests under net/, extend them, separate performance tests from correctness tests, and iron out issues found by running them "on every commit". - Refactor BPF selftests to use common network helpers. - Further work filling in YAML definitions of Netlink messages for: nftables, team driver, bonding interfaces, vlan interfaces, VF info, TC u32 mark, TC police action. - Teach Python YAML Netlink to decode attribute policies. - Extend the definition of the "indexed array" construct in the specs to cover arrays of scalars rather than just nests. - Add hyperlinks between definitions in generated Netlink docs. Drivers: - Make sure unsupported flower control flags are rejected by drivers, and make more drivers report errors directly to the application rather than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen). - Ethernet high-speed NICs: - Broadcom (bnxt): - support multiple RSS contexts and steering traffic to them - support XDP metadata - make page pool allocations more NUMA aware - Intel (100G, ice, idpf): - extract datapath code common among Intel drivers into a library - use fewer resources in switchdev by sharing queues with the PF - add PFCP filter support - add Ethernet filter support - use a spinlock instead of HW lock in PTP clock ops - support 5 layer Tx scheduler topology - nVidia/Mellanox: - 800G link modes and 100G SerDes speeds - per-queue IRQ coalescing configuration - Marvell Octeon: - support offloading TC packet mark action - Ethernet NICs consumer, embedded and virtual: - stop lying about skb->truesize in USB Ethernet drivers, it messes up TCP memory calculations - Google cloud vNIC: - support changing ring size via ethtool - support ring reset using the queue control API - VirtIO net: - expose flow hash from RSS to XDP - per-queue statistics - add selftests - Synopsys (stmmac): - support controllers which require an RX clock signal from the MII bus to perform their hardware initialization - TI: - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices - icssg_prueth: add SW TX / RX Coalescing based on hrtimers - cpsw: minimal XDP support - Renesas (ravb): - support describing the MDIO bus - Realtek (r8169): - add support for RTL8168M - Microchip Sparx5: - matchall and flower actions mirred and redirect - Ethernet switches: - nVidia/Mellanox: - improve events processing performance - Marvell: - add support for MV88E6250 family internal PHYs - Microchip: - add DCB and DSCP mapping support for KSZ switches - vsc73xx: convert to PHYLINK - Realtek: - rtl8226b/rtl8221b: add C45 instances and SerDes switching - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup - Ethernet PHYs: - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY. - micrel: lan8814: add support for PPS out and external timestamp trigger - WiFi: - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers. Modern devices can only be configured using nl80211. - mac80211/cfg80211 - handle color change per link for WiFi 7 Multi-Link Operation - Intel (iwlwifi): - don't support puncturing in 5 GHz - support monitor mode on passive channels - BZ-W device support - P2P with HE/EHT support - re-add support for firmware API 90 - provide channel survey information for Automatic Channel Selection - MediaTek (mt76): - mt7921 LED control - mt7925 EHT radiotap support - mt7920e PCI support - Qualcomm (ath11k): - P2P support for QCA6390, WCN6855 and QCA2066 - support hibernation - ieee80211-freq-limit Device Tree property support - Qualcomm (ath12k): - refactoring in preparation of multi-link support - suspend and hibernation support - ACPI support - debugfs support, including dfs_simulate_radar support - RealTek: - rtw88: RTL8723CS SDIO device support - rtw89: RTL8922AE Wi-Fi 7 PCI device support - rtw89: complete features of new WiFi 7 chip 8922AE including BT-coexistence and Wake-on-WLAN - rtw89: use BIOS ACPI settings to set TX power and channels - rtl8xxxu: enable Management Frame Protection (MFP) support - Bluetooth: - support for Intel BlazarI and Filmore Peak2 (BE201) - support for MediaTek MT7921S SDIO - initial support for Intel PCIe BT driver - remove HCI_AMP support" * tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits) selftests: netfilter: fix packetdrill conntrack testcase net: gro: fix napi_gro_cb zeroed alignment Bluetooth: btintel_pcie: Refactor and code cleanup Bluetooth: btintel_pcie: Fix warning reported by sparse Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1 Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config Bluetooth: btintel_pcie: Fix compiler warnings Bluetooth: btintel_pcie: Add *setup* function to download firmware Bluetooth: btintel_pcie: Add support for PCIe transport Bluetooth: btintel: Export few static functions Bluetooth: HCI: Remove HCI_AMP support Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() Bluetooth: qca: Fix error code in qca_read_fw_build_info() Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning Bluetooth: btintel: Add support for Filmore Peak2 (BE201) Bluetooth: btintel: Add support for BlazarI LE Create Connection command timeout increased to 20 secs dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth Bluetooth: compute LE flow credits based on recvbuf space Bluetooth: hci_sync: Use cmd->num_cis instead of magic number ...
2024-04-25bpf: crypto: add skcipher to bpf cryptoVadim Fedorenko1-0/+3
Implement skcipher crypto in BPF crypto framework. Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Link: https://lore.kernel.org/r/20240422225024.2847039-3-vadfed@meta.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-04-02crypto: remove CONFIG_CRYPTO_STATSEric Biggers1-2/+0
Remove support for the "Crypto usage statistics" feature (CONFIG_CRYPTO_STATS). This feature does not appear to have ever been used, and it is harmful because it significantly reduces performance and is a large maintenance burden. Covering each of these points in detail: 1. Feature is not being used Since these generic crypto statistics are only readable using netlink, it's fairly straightforward to look for programs that use them. I'm unable to find any evidence that any such programs exist. For example, Debian Code Search returns no hits except the kernel header and kernel code itself and translations of the kernel header: https://codesearch.debian.net/search?q=CRYPTOCFGA_STAT&literal=1&perpkg=1 The patch series that added this feature in 2018 (https://lore.kernel.org/linux-crypto/1537351855-16618-1-git-send-email-clabbe@baylibre.com/) said "The goal is to have an ifconfig for crypto device." This doesn't appear to have happened. It's not clear that there is real demand for crypto statistics. Just because the kernel provides other types of statistics such as I/O and networking statistics and some people find those useful does not mean that crypto statistics are useful too. Further evidence that programs are not using CONFIG_CRYPTO_STATS is that it was able to be disabled in RHEL and Fedora as a bug fix (https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-9/-/merge_requests/2947). Even further evidence comes from the fact that there are and have been bugs in how the stats work, but they were never reported. For example, before Linux v6.7 hash stats were double-counted in most cases. There has also never been any documentation for this feature, so it might be hard to use even if someone wanted to. 2. CONFIG_CRYPTO_STATS significantly reduces performance Enabling CONFIG_CRYPTO_STATS significantly reduces the performance of the crypto API, even if no program ever retrieves the statistics. This primarily affects systems with a large number of CPUs. For example, https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039576 reported that Lustre client encryption performance improved from 21.7GB/s to 48.2GB/s by disabling CONFIG_CRYPTO_STATS. It can be argued that this means that CONFIG_CRYPTO_STATS should be optimized with per-cpu counters similar to many of the networking counters. But no one has done this in 5+ years. This is consistent with the fact that the feature appears to be unused, so there seems to be little interest in improving it as opposed to just disabling it. It can be argued that because CONFIG_CRYPTO_STATS is off by default, performance doesn't matter. But Linux distros tend to error on the side of enabling options. The option is enabled in Ubuntu and Arch Linux, and until recently was enabled in RHEL and Fedora (see above). So, even just having the option available is harmful to users. 3. CONFIG_CRYPTO_STATS is a large maintenance burden There are over 1000 lines of code associated with CONFIG_CRYPTO_STATS, spread among 32 files. It significantly complicates much of the implementation of the crypto API. After the initial submission, many fixes and refactorings have consumed effort of multiple people to keep this feature "working". We should be spending this effort elsewhere. Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-12-08crypto: cfb,ofb - Remove cfb and ofbHerbert Xu1-2/+0
Remove the unused algorithms CFB/OFB. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20crypto: skcipher - Add lskcipherHerbert Xu1-1/+5
Add a new API type lskcipher designed for taking straight kernel pointers instead of SG lists. Its relationship to skcipher will be analogous to that between shash and ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: sig - Add interface for sign/verifyHerbert Xu1-0/+1
Split out the sign/verify functionality from the existing akcipher interface. Most algorithms in akcipher either support encryption and decryption, or signing and verify. Only one supports both. As a signature algorithm may not support encryption at all, these two should be spearated. For now sig is simply a wrapper around akcipher as all algorithms remain unchanged. This is a first step and allows users to start allocating sig instead of akcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23crypto: geniv - Split geniv out of AEAD Kconfig optionHerbert Xu1-1/+1
Give geniv its own Kconfig option so that its dependencies are distinct from that of the AEAD API code. This also allows it to be disabled if no IV generators (seqiv/echainiv) are enabled. Remove the obsolete select on RNG2 by SKCIPHER2 as skcipher IV generators disappeared long ago. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-05-12crypto: jitter - add interface for gathering of raw entropyStephan Müller1-0/+1
The test interface allows a privileged process to capture the raw unconditioned noise that is collected by the Jitter RNG for statistical analysis. Such testing allows the analysis how much entropy the Jitter RNG noise source provides on a given platform. The obtained data is the time stamp sampled by the Jitter RNG. Considering that the Jitter RNG inserts the delta of this time stamp compared to the immediately preceding time stamp, the obtained data needs to be post-processed accordingly to obtain the data the Jitter RNG inserts into its entropy pool. The raw entropy collection is provided to obtain the raw unmodified time stamps that are about to be added to the Jitter RNG entropy pool and are credited with entropy. Thus, this patch adds an interface which renders the Jitter RNG insecure. This patch is NOT INTENDED FOR PRODUCTION SYSTEMS, but solely for development/test systems to verify the available entropy rate. Access to the data is given through the jent_raw_hires debugfs file. The data buffer should be multiples of sizeof(u32) to fill the entire buffer. Using the option jitterentropy_testing.boot_raw_hires_test=1 the raw noise of the first 1000 entropy events since boot can be sampled. This test interface allows generating the data required for analysis whether the Jitter RNG is in compliance with SP800-90B sections 3.1.3 and 3.1.4. If the test interface is not compiled, its code is a noop which has no impact on the performance. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-11crypto: move gf128mul library into lib/cryptoArd Biesheuvel1-1/+0
The gf128mul library does not depend on the crypto API at all, so it can be moved into lib/crypto. This will allow us to use it in other library code in a subsequent patch without having to depend on CONFIG_CRYPTO. While at it, change the Kconfig symbol name to align with other crypto library implementations. However, the source file name is retained, as it is reflected in the module .ko filename, and changing this might break things for users. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-24crypto: aria - prepare generic module for optimized implementationsTaehee Yoo1-1/+1
It renames aria to aria_generic and exports some functions such as aria_set_key(), aria_encrypt(), and aria_decrypt() to be able to be used by aria-avx implementation. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-11crypto: blake2b: effectively disable frame size warningLinus Torvalds1-0/+1
It turns out that gcc-12.1 has some nasty problems with register allocation on a 32-bit x86 build for the 64-bit values used in the generic blake2b implementation, where the pattern of 64-bit rotates and xor operations ends up making gcc generate horrible code. As a result it ends up with a ridiculously large stack frame for all the spills it generates, resulting in the following build problem: crypto/blake2b_generic.c: In function ‘blake2b_compress_one_generic’: crypto/blake2b_generic.c:109:1: error: the frame size of 2640 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] on the same test-case, clang ends up generating a stack frame that is just 296 bytes (and older gcc versions generate a slightly bigger one at 428 bytes - still nowhere near that almost 3kB monster stack frame of gcc-12.1). The issue is fixed both in mainline and the GCC 12 release branch [1], but current release compilers end up failing the i386 allmodconfig build due to this issue. Disable the warning for now by simply raising the frame size for this one file, just to keep this issue from having people turn off WERROR. Link: https://lore.kernel.org/all/CAHk-=wjxqgeG2op+=W9sqgsWqCYnavC+SRfVyopu9-31S6xw+Q@mail.gmail.com/ Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105930 [1] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-15crypto: aria - Implement ARIA symmetric cipher algorithmTaehee Yoo1-0/+1
ARIA(RFC 5794) is a symmetric block cipher algorithm. This algorithm is being used widely in South Korea as a standard cipher algorithm. This code is written based on the ARIA implementation of OpenSSL. The OpenSSL code is based on the distributed source code[1] by KISA. ARIA has three key sizes and corresponding rounds. ARIA128: 12 rounds. ARIA192: 14 rounds. ARIA245: 16 rounds. [1] https://seed.kisa.or.kr/kisa/Board/19/detailView.do (Korean) Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10crypto: blake2s - remove shash moduleJason A. Donenfeld1-1/+0
BLAKE2s has no currently known use as an shash. Just remove all of this unnecessary plumbing. Removing this shash was something we talked about back when we were making BLAKE2s a built-in, but I simply never got around to doing it. So this completes that project. Importantly, this fixs a bug in which the lib code depends on crypto_simd_disabled_for_test, causing linker errors. Also add more alignment tests to the selftests and compare SIMD and non-SIMD compression functions, to make up for what we lose from testmgr.c. Reported-by: gaochao <gaochao49@huawei.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: stable@vger.kernel.org Fixes: 6048fdcc5f26 ("lib/crypto: blake2s: include as built-in") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10crypto: memneq - move into lib/Jason A. Donenfeld1-1/+1
This is used by code that doesn't need CONFIG_CRYPTO, so move this into lib/ with a Kconfig option so that it can be selected by whatever needs it. This fixes a linker error Zheng pointed out when CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m: lib/crypto/curve25519-selftest.o: In function `curve25519_selftest': curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq' Reported-by: Zheng Bin <zhengbin13@huawei.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: stable@vger.kernel.org Fixes: aa127963f1ca ("crypto: lib/curve25519 - re-add selftests") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10crypto: hctr2 - Add HCTR2 supportNathan Huckleberry1-0/+1
Add support for HCTR2 as a template. HCTR2 is a length-preserving encryption mode that is efficient on processors with instructions to accelerate AES and carryless multiplication, e.g. x86 processors with AES-NI and CLMUL, and ARM processors with the ARMv8 Crypto Extensions. As a length-preserving encryption mode, HCTR2 is suitable for applications such as storage encryption where ciphertext expansion is not possible, and thus authenticated encryption cannot be used. Currently, such applications usually use XTS, or in some cases Adiantum. XTS has the disadvantage that it is a narrow-block mode: a bitflip will only change 16 bytes in the resulting ciphertext or plaintext. This reveals more information to an attacker than necessary. HCTR2 is a wide-block mode, so it provides a stronger security property: a bitflip will change the entire message. HCTR2 is somewhat similar to Adiantum, which is also a wide-block mode. However, HCTR2 is designed to take advantage of existing crypto instructions, while Adiantum targets devices without such hardware support. Adiantum is also designed with longer messages in mind, while HCTR2 is designed to be efficient even on short messages. HCTR2 requires POLYVAL and XCTR as components. More information on HCTR2 can be found here: "Length-preserving encryption with HCTR2": https://eprint.iacr.org/2021/1441.pdf Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10crypto: polyval - Add POLYVAL supportNathan Huckleberry1-0/+1
Add support for POLYVAL, an ε-Δ-universal hash function similar to GHASH. This patch only uses POLYVAL as a component to implement HCTR2 mode. It should be noted that POLYVAL was originally specified for use in AES-GCM-SIV (RFC 8452), but the kernel does not currently support this mode. POLYVAL is implemented as an shash algorithm. The implementation is modified from ghash-generic.c. For more information on POLYVAL see: Length-preserving encryption with HCTR2: https://eprint.iacr.org/2021/1441.pdf AES-GCM-SIV: Nonce Misuse-Resistant Authenticated Encryption: https://datatracker.ietf.org/doc/html/rfc8452 Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10crypto: xctr - Add XCTR supportNathan Huckleberry1-0/+1
Add a generic implementation of XCTR mode as a template. XCTR is a blockcipher mode similar to CTR mode. XCTR uses XORs and little-endian addition rather than big-endian arithmetic which has two advantages: It is slightly faster on little-endian CPUs and it is less likely to be implemented incorrect since integer overflows are not possible on practical input sizes. XCTR is used as a component to implement HCTR2. More information on XCTR mode can be found in the HCTR2 paper: https://eprint.iacr.org/2021/1441.pdf Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-08crypto: sm3,sm4 - move into crypto directoryJason A. Donenfeld1-2/+4
The lib/crypto libraries live in lib because they are used by various drivers of the kernel. In contrast, the various helper functions in crypto are there because they're used exclusively by the crypto API. The SM3 and SM4 helper functions were erroniously moved into lib/crypto/ instead of crypto/, even though there are no in-kernel users outside of the crypto API of those functions. This commit moves them into crypto/. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-07crypto: add rocksoft 64b crc guard tag frameworkKeith Busch1-0/+1
Hardware specific features may be able to calculate a crc64, so provide a framework for drivers to register their implementation. If nothing is registered, fallback to the generic table lookup implementation. The implementation is modeled after the crct10dif equivalent. Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20220303201312.3255347-7-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-26crypto: kdf - add SP800-108 counter key derivation functionStephan Müller1-0/+5
SP800-108 defines three KDFs - this patch provides the counter KDF implementation. The KDF is implemented as a service function where the caller has to maintain the hash / HMAC state. Apart from this hash/HMAC state, no additional state is required to be maintained by either the caller or the KDF implementation. The key for the KDF is set with the crypto_kdf108_setkey function which is intended to be invoked before the caller requests a key derivation operation via crypto_kdf108_ctr_generate. SP800-108 allows the use of either a HMAC or a hash as crypto primitive for the KDF. When a HMAC primtive is intended to be used, crypto_kdf108_setkey must be used to set the HMAC key. Otherwise, for a hash crypto primitve crypto_kdf108_ctr_generate can be used immediately after allocating the hash handle. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-09-22isystem: delete global -isystem compile optionAlexey Dobriyan1-0/+2
Further isolate kernel from userspace, prevent accidental inclusion of undesireable headers, mainly float.h and stdatomic.h. nds32 keeps -isystem globally due to intrinsics used in entrenched header. -isystem is selectively reenabled for some files, again, for intrinsics. Compile tested on: hexagon-defconfig hexagon-allmodconfig alpha-allmodconfig alpha-allnoconfig alpha-defconfig arm64-allmodconfig arm64-allnoconfig arm64-defconfig arm-am200epdkit arm-aspeed_g4 arm-aspeed_g5 arm-assabet arm-at91_dt arm-axm55xx arm-badge4 arm-bcm2835 arm-cerfcube arm-clps711x arm-cm_x300 arm-cns3420vb arm-colibri_pxa270 arm-colibri_pxa300 arm-collie arm-corgi arm-davinci_all arm-dove arm-ep93xx arm-eseries_pxa arm-exynos arm-ezx arm-footbridge arm-gemini arm-h3600 arm-h5000 arm-hackkit arm-hisi arm-imote2 arm-imx_v4_v5 arm-imx_v6_v7 arm-integrator arm-iop32x arm-ixp4xx arm-jornada720 arm-keystone arm-lart arm-lpc18xx arm-lpc32xx arm-lpd270 arm-lubbock arm-magician arm-mainstone arm-milbeaut_m10v arm-mini2440 arm-mmp2 arm-moxart arm-mps2 arm-multi_v4t arm-multi_v5 arm-multi_v7 arm-mv78xx0 arm-mvebu_v5 arm-mvebu_v7 arm-mxs arm-neponset arm-netwinder arm-nhk8815 arm-omap1 arm-omap2plus arm-orion5x arm-oxnas_v6 arm-palmz72 arm-pcm027 arm-pleb arm-pxa arm-pxa168 arm-pxa255-idp arm-pxa3xx arm-pxa910 arm-qcom arm-realview arm-rpc arm-s3c2410 arm-s3c6400 arm-s5pv210 arm-sama5 arm-shannon arm-shmobile arm-simpad arm-socfpga arm-spear13xx arm-spear3xx arm-spear6xx arm-spitz arm-stm32 arm-sunxi arm-tct_hammer arm-tegra arm-trizeps4 arm-u8500 arm-versatile arm-vexpress arm-vf610m4 arm-viper arm-vt8500_v6_v7 arm-xcep arm-zeus csky-allmodconfig csky-allnoconfig csky-defconfig h8300-edosk2674 h8300-h8300h-sim h8300-h8s-sim i386-allmodconfig i386-allnoconfig i386-defconfig ia64-allmodconfig ia64-allnoconfig ia64-bigsur ia64-generic ia64-gensparse ia64-tiger ia64-zx1 m68k-amcore m68k-amiga m68k-apollo m68k-atari m68k-bvme6000 m68k-hp300 m68k-m5208evb m68k-m5249evb m68k-m5272c3 m68k-m5275evb m68k-m5307c3 m68k-m5407c3 m68k-m5475evb m68k-mac m68k-multi m68k-mvme147 m68k-mvme16x m68k-q40 m68k-stmark2 m68k-sun3 m68k-sun3x microblaze-allmodconfig microblaze-allnoconfig microblaze-mmu mips-ar7 mips-ath25 mips-ath79 mips-bcm47xx mips-bcm63xx mips-bigsur mips-bmips_be mips-bmips_stb mips-capcella mips-cavium_octeon mips-ci20 mips-cobalt mips-cu1000-neo mips-cu1830-neo mips-db1xxx mips-decstation mips-decstation_64 mips-decstation_r4k mips-e55 mips-fuloong2e mips-gcw0 mips-generic mips-gpr mips-ip22 mips-ip27 mips-ip28 mips-ip32 mips-jazz mips-jmr3927 mips-lemote2f mips-loongson1b mips-loongson1c mips-loongson2k mips-loongson3 mips-malta mips-maltaaprp mips-malta_kvm mips-malta_qemu_32r6 mips-maltasmvp mips-maltasmvp_eva mips-maltaup mips-maltaup_xpa mips-mpc30x mips-mtx1 mips-nlm_xlp mips-nlm_xlr mips-omega2p mips-pic32mzda mips-pistachio mips-qi_lb60 mips-rb532 mips-rbtx49xx mips-rm200 mips-rs90 mips-rt305x mips-sb1250_swarm mips-tb0219 mips-tb0226 mips-tb0287 mips-vocore2 mips-workpad mips-xway nds32-allmodconfig nds32-allnoconfig nds32-defconfig nios2-10m50 nios2-3c120 nios2-allmodconfig nios2-allnoconfig openrisc-allmodconfig openrisc-allnoconfig openrisc-or1klitex openrisc-or1ksim openrisc-simple_smp parisc-allnoconfig parisc-generic-32bit parisc-generic-64bit powerpc-acadia powerpc-adder875 powerpc-akebono powerpc-amigaone powerpc-arches powerpc-asp8347 powerpc-bamboo powerpc-bluestone powerpc-canyonlands powerpc-cell powerpc-chrp32 powerpc-cm5200 powerpc-currituck powerpc-ebony powerpc-eiger powerpc-ep8248e powerpc-ep88xc powerpc-fsp2 powerpc-g5 powerpc-gamecube powerpc-ge_imp3a powerpc-holly powerpc-icon powerpc-iss476-smp powerpc-katmai powerpc-kilauea powerpc-klondike powerpc-kmeter1 powerpc-ksi8560 powerpc-linkstation powerpc-lite5200b powerpc-makalu powerpc-maple powerpc-mgcoge powerpc-microwatt powerpc-motionpro powerpc-mpc512x powerpc-mpc5200 powerpc-mpc7448_hpc2 powerpc-mpc8272_ads powerpc-mpc8313_rdb powerpc-mpc8315_rdb powerpc-mpc832x_mds powerpc-mpc832x_rdb powerpc-mpc834x_itx powerpc-mpc834x_itxgp powerpc-mpc834x_mds powerpc-mpc836x_mds powerpc-mpc836x_rdk powerpc-mpc837x_mds powerpc-mpc837x_rdb powerpc-mpc83xx powerpc-mpc8540_ads powerpc-mpc8560_ads powerpc-mpc85xx_cds powerpc-mpc866_ads powerpc-mpc885_ads powerpc-mvme5100 powerpc-obs600 powerpc-pasemi powerpc-pcm030 powerpc-pmac32 powerpc-powernv powerpc-ppa8548 powerpc-ppc40x powerpc-ppc44x powerpc-ppc64 powerpc-ppc64e powerpc-ppc6xx powerpc-pq2fads powerpc-ps3 powerpc-pseries powerpc-rainier powerpc-redwood powerpc-sam440ep powerpc-sbc8548 powerpc-sequoia powerpc-skiroot powerpc-socrates powerpc-storcenter powerpc-stx_gp3 powerpc-taishan powerpc-tqm5200 powerpc-tqm8540 powerpc-tqm8541 powerpc-tqm8548 powerpc-tqm8555 powerpc-tqm8560 powerpc-tqm8xx powerpc-walnut powerpc-warp powerpc-wii powerpc-xes_mpc85xx riscv-allmodconfig riscv-allnoconfig riscv-nommu_k210 riscv-nommu_k210_sdcard riscv-nommu_virt riscv-rv32 s390-allmodconfig s390-allnoconfig s390-debug s390-zfcpdump sh-ap325rxa sh-apsh4a3a sh-apsh4ad0a sh-dreamcast sh-ecovec24 sh-ecovec24-romimage sh-edosk7705 sh-edosk7760 sh-espt sh-hp6xx sh-j2 sh-kfr2r09 sh-kfr2r09-romimage sh-landisk sh-lboxre2 sh-magicpanelr2 sh-microdev sh-migor sh-polaris sh-r7780mp sh-r7785rp sh-rsk7201 sh-rsk7203 sh-rsk7264 sh-rsk7269 sh-rts7751r2d1 sh-rts7751r2dplus sh-sdk7780 sh-sdk7786 sh-se7206 sh-se7343 sh-se7619 sh-se7705 sh-se7712 sh-se7721 sh-se7722 sh-se7724 sh-se7750 sh-se7751 sh-se7780 sh-secureedge5410 sh-sh03 sh-sh2007 sh-sh7710voipgw sh-sh7724_generic sh-sh7757lcr sh-sh7763rdp sh-sh7770_generic sh-sh7785lcr sh-sh7785lcr_32bit sh-shmin sh-shx3 sh-titan sh-ul2 sh-urquell sparc-allmodconfig sparc-allnoconfig sparc-sparc32 sparc-sparc64 um-i386-allmodconfig um-i386-allnoconfig um-i386-defconfig um-x86_64-allmodconfig um-x86_64-allnoconfig x86_64-allmodconfig x86_64-allnoconfig x86_64-defconfig xtensa-allmodconfig xtensa-allnoconfig xtensa-audio_kc705 xtensa-cadence_csp xtensa-common xtensa-generic_kc705 xtensa-iss xtensa-nommu_kc705 xtensa-smp_lx200 xtensa-virt xtensa-xip_kc705 Tested-by: Nathan Chancellor <nathan@kernel.org> # build (hexagon) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-08-27crypto: rmd320 - remove rmd320 in MakefileLukas Bulwahn1-1/+0
Commit 93f64202926f ("crypto: rmd320 - remove RIPE-MD 320 hash algorithm") removes the Kconfig and code, but misses to adjust the Makefile. Hence, ./scripts/checkkconfigsymbols.py warns: CRYPTO_RMD320 Referencing files: crypto/Makefile Remove the missing piece of this code removal. Fixes: 93f64202926f ("crypto: rmd320 - remove RIPE-MD 320 hash algorithm") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26crypto: ecdsa - Add support for ECDSA signature verificationStefan Berger1-0/+6
Add support for parsing the parameters of a NIST P256 or NIST P192 key. Enable signature verification using these keys. The new module is enabled with CONFIG_ECDSA: Elliptic Curve Digital Signature Algorithm (NIST P192, P256 etc.) is A NIST cryptographic standard algorithm. Only signature verification is implemented. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29crypto: salsa20 - remove Salsa20 stream cipher algorithmArd Biesheuvel1-1/+0
Salsa20 is not used anywhere in the kernel, is not suitable for disk encryption, and widely considered to have been superseded by ChaCha20. So let's remove it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29crypto: tgr192 - remove Tiger 128/160/192 hash algorithmsArd Biesheuvel1-1/+0
Tiger is never referenced anywhere in the kernel, and unlikely to be depended upon by userspace via AF_ALG. So let's remove it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29crypto: rmd256 - remove RIPE-MD 256 hash algorithmArd Biesheuvel1-1/+0
RIPE-MD 256 is never referenced anywhere in the kernel, and unlikely to be depended upon by userspace via AF_ALG. So let's remove it Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29crypto: rmd128 - remove RIPE-MD 128 hash algorithmArd Biesheuvel1-1/+0
RIPE-MD 128 is never referenced anywhere in the kernel, and unlikely to be depended upon by userspace via AF_ALG. So let's remove it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: sm2 - introduce OSCCA SM2 asymmetric cipher algorithmTianjia Zhang1-0/+8
This new module implement the SM2 public key algorithm. It was published by State Encryption Management Bureau, China. List of specifications for SM2 elliptic curve public key cryptography: * GM/T 0003.1-2012 * GM/T 0003.2-2012 * GM/T 0003.3-2012 * GM/T 0003.4-2012 * GM/T 0003.5-2012 IETF: https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02 oscca: http://www.oscca.gov.cn/sca/xxgk/2010-12/17/content_1002386.shtml scctc: http://www.gmbz.org.cn/main/bzlb.html Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: ablkcipher - remove deprecated and unused ablkcipher supportArd Biesheuvel1-3/+1
Now that all users of the deprecated ablkcipher interface have been moved to the skcipher interface, ablkcipher is no longer used and can be removed. Reviewed-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: curve25519 - implement generic KPP driverArd Biesheuvel1-0/+1
Expose the generic Curve25519 library via the crypto API KPP interface. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: blake2s - implement generic shash driverArd Biesheuvel1-0/+1
Wire up our newly added Blake2s implementation via the shash API. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: aead - Split out geniv into its own moduleHerbert Xu1-0/+1
If aead is built as a module along with cryptomgr, it creates a dependency loop due to the dependency chain aead => crypto_null => cryptomgr => aead. This is due to the presence of the AEAD geniv code. This code is not really part of the AEAD API but simply support code for IV generators such as seqiv. This patch moves the geniv code into its own module thus breaking the dependency loop. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: skcipher - rename the crypto_blkcipher module and kconfig optionEric Biggers1-3/+3
Now that the blkcipher algorithm type has been removed in favor of skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher, and rename the config options accordingly: CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2 Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: skcipher - remove the "blkcipher" algorithm typeEric Biggers1-1/+0
Now that all "blkcipher" algorithms have been converted to "skcipher", remove the blkcipher algorithm type. The skcipher (symmetric key cipher) algorithm type was introduced a few years ago to replace both blkcipher and ablkcipher (synchronous and asynchronous block cipher). The advantages of skcipher include: - A much less confusing name, since none of these algorithm types have ever actually been for raw block ciphers, but rather for all length-preserving encryption modes including block cipher modes of operation, stream ciphers, and other length-preserving modes. - It unified blkcipher and ablkcipher into a single algorithm type which supports both synchronous and asynchronous implementations. Note, blkcipher already operated only on scatterlists, so the fact that skcipher does too isn't a regression in functionality. - Better type safety by using struct skcipher_alg, struct crypto_skcipher, etc. instead of crypto_alg, crypto_tfm, etc. - It sometimes simplifies the implementations of algorithms. Also, the blkcipher API was no longer being tested. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: blake2b - add blake2b generic implementationDavid Sterba1-0/+1
The patch brings support of several BLAKE2 variants (2b with various digest lengths). The keyed digest is supported, using tfm->setkey call. The in-tree user will be btrfs (for checksumming), we're going to use the BLAKE2b-256 variant. The code is reference implementation taken from the official sources and modified in terms of kernel coding style (whitespace, comments, uintXX_t -> uXX types, removed unused prototypes and #ifdefs, removed testing code, changed secure_zero_memory -> memzero_explicit, used own helpers for unaligned reads/writes and rotations). Further changes removed sanity checks of key length or output size, these values are verified in the crypto API callbacks or hardcoded in shash_alg and not exposed to users. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-04crypto: aegis128-neon - use Clang compatible cflags for ARMArd Biesheuvel1-1/+1
The next version of Clang will start policing compiler command line options, and will reject combinations of -march and -mfpu that it thinks are incompatible. This results in errors like clang-10: warning: ignoring extension 'crypto' because the 'armv7-a' architecture does not support it [-Winvalid-command-line-argument] /tmp/aegis128-neon-inner-5ee428.s: Assembler messages: /tmp/aegis128-neon-inner-5ee428.s:73: Error: selected processor does not support `aese.8 q2,q14' in ARM mode when buiding the SIMD aegis128 code for 32-bit ARM, given that the 'armv7-a' -march argument is considered to be compatible with the ARM crypto extensions. Instead, we should use armv8-a, which does allow the crypto extensions to be enabled. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-21Merge tag 'for-5.4/dm-changes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - crypto and DM crypt advances that allow the crypto API to reclaim implementation details that do not belong in DM crypt. The wrapper template for ESSIV generation that was factored out will also be used by fscrypt in the future. - Add root hash pkcs#7 signature verification to the DM verity target. - Add a new "clone" DM target that allows for efficient remote replication of a device. - Enhance DM bufio's cache to be tailored to each client based on use. Clients that make heavy use of the cache get more of it, and those that use less have reduced cache usage. - Add a new DM_GET_TARGET_VERSION ioctl to allow userspace to query the version number of a DM target (even if the associated module isn't yet loaded). - Fix invalid memory access in DM zoned target. - Fix the max_discard_sectors limit advertised by the DM raid target; it was mistakenly storing the limit in bytes rather than sectors. - Small optimizations and cleanups in DM writecache target. - Various fixes and cleanups in DM core, DM raid1 and space map portion of DM persistent data library. * tag 'for-5.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits) dm: introduce DM_GET_TARGET_VERSION dm bufio: introduce a global cache replacement dm bufio: remove old-style buffer cleanup dm bufio: introduce a global queue dm bufio: refactor adjust_total_allocated dm bufio: call adjust_total_allocated from __link_buffer and __unlink_buffer dm: add clone target dm raid: fix updating of max_discard_sectors limit dm writecache: skip writecache_wait for pmem mode dm stats: use struct_size() helper dm crypt: omit parsing of the encapsulated cipher dm crypt: switch to ESSIV crypto API template crypto: essiv - create wrapper template for ESSIV generation dm space map common: remove check for impossible sm_find_free() return value dm raid1: use struct_size() with kzalloc() dm writecache: optimize performance by sorting the blocks for writeback_all dm writecache: add unlikely for getting two block with same LBA dm writecache: remove unused member pointer in writeback_struct dm zoned: fix invalid memory access dm verity: add root hash pkcs#7 signature verification ...
2019-09-03crypto: essiv - create wrapper template for ESSIV generationArd Biesheuvel1-0/+1
Implement a template that wraps a (skcipher,shash) or (aead,shash) tuple so that we can consolidate the ESSIV handling in fscrypt and dm-crypt and move it into the crypto API. This will result in better test coverage, and will allow future changes to make the bare cipher interface internal to the crypto subsystem, in order to increase robustness of the API against misuse. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-15crypto: arm64/aegis128 - implement plain NEON versionArd Biesheuvel1-1/+8
Provide a version of the core AES transform to the aegis128 SIMD code that does not rely on the special AES instructions, but uses plain NEON instructions instead. This allows the SIMD version of the aegis128 driver to be used on arm64 systems that do not implement those instructions (which are not mandatory in the architecture), such as the Raspberry Pi 3. Since GCC makes a mess of this when using the tbl/tbx intrinsics to perform the sbox substitution, preload the Sbox into v16..v31 in this case and use inline asm to emit the tbl/tbx instructions. Clang does not support this approach, nor does it require it, since it does a much better job at code generation, so there we use the intrinsics as usual. Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-15crypto: aegis128 - provide a SIMD implementation based on NEON intrinsicsArd Biesheuvel1-0/+12
Provide an accelerated implementation of aegis128 by wiring up the SIMD hooks in the generic driver to an implementation based on NEON intrinsics, which can be compiled to both ARM and arm64 code. This results in a performance of 2.2 cycles per byte on Cortex-A53, which is a performance increase of ~11x compared to the generic code. Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-15crypto: aegis128 - add support for SIMD accelerationArd Biesheuvel1-0/+1
Add some plumbing to allow the AEGIS128 code to be built with SIMD routines for acceleration. Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-02crypto: jitterentropy - build without sanitizerArnd Bergmann1-0/+2
Recent clang-9 snapshots double the kernel stack usage when building this file with -O0 -fsanitize=kernel-hwaddress, compared to clang-8 and older snapshots, this changed between commits svn364966 and svn366056: crypto/jitterentropy.c:516:5: error: stack frame size of 2640 bytes in function 'jent_entropy_init' [-Werror,-Wframe-larger-than=] int jent_entropy_init(void) ^ crypto/jitterentropy.c:185:14: error: stack frame size of 2224 bytes in function 'jent_lfsr_time' [-Werror,-Wframe-larger-than=] static __u64 jent_lfsr_time(struct rand_data *ec, __u64 time, __u64 loop_cnt) ^ I prepared a reduced test case in case any clang developers want to take a closer look, but from looking at the earlier output it seems that even with clang-8, something was very wrong here. Turn off any KASAN and UBSAN sanitizing for this file, as that likely clashes with -O0 anyway. Turning off just KASAN avoids the warning already, but I suspect both of these have undesired side-effects for jitterentropy. Link: https://godbolt.org/z/fDcwZ5 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-02Revert "crypto: aegis128 - add support for SIMD acceleration"Herbert Xu1-12/+0
This reverts commit ecc8bc81f2fb3976737ef312f824ba6053aa3590 ("crypto: aegis128 - provide a SIMD implementation based on NEON intrinsics") and commit 7cdc0ddbf74a19cecb2f0e9efa2cae9d3c665189 ("crypto: aegis128 - add support for SIMD acceleration"). They cause compile errors on platforms other than ARM because the mechanism to selectively compile the SIMD code is broken. Repoted-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: aegis128 - provide a SIMD implementation based on NEON intrinsicsArd Biesheuvel1-0/+11
Provide an accelerated implementation of aegis128 by wiring up the SIMD hooks in the generic driver to an implementation based on NEON intrinsics, which can be compiled to both ARM and arm64 code. This results in a performance of 2.2 cycles per byte on Cortex-A53, which is a performance increase of ~11x compared to the generic code. Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: aegis128 - add support for SIMD accelerationArd Biesheuvel1-0/+1
Add some plumbing to allow the AEGIS128 code to be built with SIMD routines for acceleration. Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: aegis128l/aegis256 - remove x86 and generic implementationsArd Biesheuvel1-2/+0
Three variants of AEGIS were proposed for the CAESAR competition, and only one was selected for the final portfolio: AEGIS128. The other variants, AEGIS128L and AEGIS256, are not likely to ever turn up in networking protocols or other places where interoperability between Linux and other systems is a concern, nor are they likely to be subjected to further cryptanalysis. However, uninformed users may think that AEGIS128L (which is faster) is equally fit for use. So let's remove them now, before anyone starts using them and we are forced to support them forever. Note that there are no known flaws in the algorithms or in any of these implementations, but they have simply outlived their usefulness. Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26crypto: morus - remove generic and x86 implementationsArd Biesheuvel1-2/+0
MORUS was not selected as a winner in the CAESAR competition, which is not surprising since it is considered to be cryptographically broken [0]. (Note that this is not an implementation defect, but a flaw in the underlying algorithm). Since it is unlikely to be in use currently, let's remove it before we're stuck with it. [0] https://eprint.iacr.org/2019/172.pdf Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-06crypto: xxhash - Implement xxhash supportNikolay Borisov1-0/+1
xxhash is currently implemented as a self-contained module in /lib. This patch enables that module to be used as part of the generic kernel crypto framework. It adds a simple wrapper to the 64bit version. I've also added test vectors (with help from Nick Terrell). The upstream xxhash code is tested by running hashing operation on random 222 byte data with seed values of 0 and a prime number. The upstream test suite can be found at https://github.com/Cyan4973/xxHash/blob/cf46e0c/xxhsum.c#L664 Essentially hashing is run on data of length 0,1,14,222 with the aforementioned seed values 0 and prime 2654435761. The particular random 222 byte string was provided to me by Nick Terrell by reading /dev/random and the checksums were calculated by the upstream xxsum utility with the following bash script: dd if=/dev/random of=TEST_VECTOR bs=1 count=222 for a in 0 1; do for l in 0 1 14 222; do for s in 0 2654435761; do echo algo $a length $l seed $s; head -c $l TEST_VECTOR | ~/projects/kernel/xxHash/xxhsum -H$a -s$s done done done This produces output as follows: algo 0 length 0 seed 0 02cc5d05 stdin algo 0 length 0 seed 2654435761 02cc5d05 stdin algo 0 length 1 seed 0 25201171 stdin algo 0 length 1 seed 2654435761 25201171 stdin algo 0 length 14 seed 0 c1d95975 stdin algo 0 length 14 seed 2654435761 c1d95975 stdin algo 0 length 222 seed 0 b38662a6 stdin algo 0 length 222 seed 2654435761 b38662a6 stdin algo 1 length 0 seed 0 ef46db3751d8e999 stdin algo 1 length 0 seed 2654435761 ac75fda2929b17ef stdin algo 1 length 1 seed 0 27c3f04c2881203a stdin algo 1 length 1 seed 2654435761 4a15ed26415dfe4d stdin algo 1 length 14 seed 0 3d33dc700231dfad stdin algo 1 length 14 seed 2654435761 ea5f7ddef9a64f80 stdin algo 1 length 222 seed 0 5f3d3c08ec2bef34 stdin algo 1 length 222 seed 2654435761 6a9df59664c7ed62 stdin algo 1 is xx64 variant, algo 0 is the 32 bit variant which is currently not hooked up. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-30crypto: cryptd - move kcrypto_wq into cryptdEric Biggers1-2/+0
kcrypto_wq is only used by cryptd, so move it into cryptd.c and change the workqueue name from "crypto" to "cryptd". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 22:10:19 +0300