summaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2020-10-24Merge tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-blockLinus Torvalds3-3/+7
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph - rdma error handling fixes (Chao Leng) - fc error handling and reconnect fixes (James Smart) - fix the qid displace when tracing ioctl command (Keith Busch) - don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni) - fix MTDT for passthru (Logan Gunthorpe) - blacklist Write Same on more devices (Kai-Heng Feng) - fix an uninitialized work struct (zhenwei pi)" - lightnvm out-of-bounds fix (Colin) - SG allocation leak fix (Doug) - rnbd fixes (Gioh, Guoqing, Jack) - zone error translation fixes (Keith) - kerneldoc markup fix (Mauro) - zram lockdep fix (Peter) - Kill unused io_context members (Yufen) - NUMA memory allocation cleanup (Xianting) - NBD config wakeup fix (Xiubo) * tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits) block: blk-mq: fix a kernel-doc markup nvme-fc: shorten reconnect delay if possible for FC nvme-fc: wait for queues to freeze before calling update_hr_hw_queues nvme-fc: fix error loop in create_hw_io_queues nvme-fc: fix io timeout to abort I/O null_blk: use zone status for max active/open nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru nvmet: cleanup nvmet_passthru_map_sg() nvmet: limit passthru MTDS by BIO_MAX_PAGES nvmet: fix uninitialized work for zero kato nvme-pci: disable Write Zeroes on Sandisk Skyhawk nvme: use queuedata for nvme_req_qid nvme-rdma: fix crash due to incorrect cqe nvme-rdma: fix crash when connect rejected block: remove unused members for io_context blk-mq: remove the calling of local_memory_node() zram: Fix __zram_bvec_{read,write}() locking order skd_main: remove unused including <linux/version.h> sgl_alloc_order: fix memory leak lightnvm: fix out-of-bounds write to array devices->info[] ...
2020-10-23block: blk-mq: fix a kernel-doc markupMauro Carvalho Chehab1-1/+1
Fix a typo: blk_mq_run_hw_queue -> blk_mq_run_hw_queues Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-20blk-mq: remove the calling of local_memory_node()Xianting Tian2-2/+2
We don't need to check whether the node is memoryless numa node before calling allocator interface. SLUB(and SLAB,SLOB) relies on the page allocator to pick a node. Page allocator should deal with memoryless nodes just fine. It has zonelists constructed for each possible nodes. And it will automatically fall back into a node which is closest to the requested node. As long as __GFP_THISNODE is not enforced of course. The code comments of kmem_cache_alloc_node() of SLAB also showed this: * Fallback to other node is possible if __GFP_THISNODE is not set. blk-mq code doesn't set __GFP_THISNODE, so we can remove the calling of local_memory_node(). Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-15docs: bio: fix a kerneldoc markupMauro Carvalho Chehab1-1/+1
Fix this warning: ./block/bio.c:1098: WARNING: Inline emphasis start-string without end-string. The thing is that *iter is not a valid markup. That seems to be a typo: *iter -> @iter Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-15block: bio: fix a warning at the kernel-doc markupsMauro Carvalho Chehab1-1/+1
Using "@bio's parent" causes the following waring: ./block/bio.c:10: WARNING: Inline emphasis start-string without end-string. The main problem here is that this would be converted into: **bio**'s parent By kernel-doc, which is not a valid notation. It would be possible to use, instead, this kernel-doc markup: ``bio's`` parent Yet, here, is probably simpler to just use an altenative language: the parent of @bio Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-15Merge tag 'for-5.10/dm-changes' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Improve DM core's bio splitting to use blk_max_size_offset(). Also fix bio splitting for bios that were deferred to the worker thread due to a DM device being suspended. - Remove DM core's special handling of NVMe devices now that block core has internalized efficiencies drivers previously needed to be concerned about (via now removed direct_make_request). - Fix request-based DM to not bounce through indirect dm_submit_bio; instead have block core make direct call to blk_mq_submit_bio(). - Various DM core cleanups to simplify and improve code. - Update DM cryot to not use drivers that set CRYPTO_ALG_ALLOCATES_MEMORY. - Fix DM raid's raid1 and raid10 discard limits for the purposes of linux-stable. But then remove DM raid's discard limits settings now that MD raid can efficiently handle large discards. - A couple small cleanups across various targets. * tag 'for-5.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix request-based DM to not bounce through indirect dm_submit_bio dm: remove special-casing of bio-based immutable singleton target on NVMe dm: export dm_copy_name_and_uuid dm: fix comment in __dm_suspend() dm: fold dm_process_bio() into dm_submit_bio() dm: fix missing imposition of queue_limits from dm_wq_work() thread dm snap persistent: simplify area_io() dm thin metadata: Remove unused local variable when create thin and snap dm raid: remove unnecessary discard limits for raid10 dm raid: fix discard limits for raid1 and raid10 dm crypt: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY dm: use dm_table_get_device_name() where appropriate in targets dm table: make 'struct dm_table' definition accessible to all of DM core dm: eliminate need for start_io_acct() forward declaration dm: simplify __process_abnormal_io() dm: push use of on-stack flush_bio down to __send_empty_flush() dm: optimize max_io_len() by inlining max_io_len_target_boundary() dm: push md->immutable_target optimization down to __process_bio() dm: change max_io_len() to use blk_max_size_offset() dm table: stack 'chunk_sectors' limit to account for target-specific splitting
2020-10-14block: add zone specific block statusesKeith Busch1-0/+4
A zoned device with limited resources to open or activate zones may return an error when the host exceeds those limits. The same command may be successful if retried later, but the host needs to wait for specific zone states before it should expect a retry to succeed. Have the block layer provide an appropriate status for these conditions so applications can distinuguish this error for special handling. Cc: linux-api@vger.kernel.org Cc: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-13Merge tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+3
Pull block driver updates from Jens Axboe: "Here are the driver updates for 5.10. A few SCSI updates in here too, in coordination with Martin as they depend on core block changes for the shared tag bitmap. This contains: - NVMe pull requests via Christoph: - fix keep alive timer modification (Amit Engel) - order the PCI ID list more sensibly (Andy Shevchenko) - cleanup the open by controller helper (Chaitanya Kulkarni) - use an xarray for the CSE log lookup (Chaitanya Kulkarni) - support ZNS in nvmet passthrough mode (Chaitanya Kulkarni) - fix nvme_ns_report_zones (Christoph Hellwig) - add a sanity check to nvmet-fc (James Smart) - fix interrupt allocation when too many polled queues are specified (Jeffle Xu) - small nvmet-tcp optimization (Mark Wunderlich) - fix a controller refcount leak on init failure (Chaitanya Kulkarni) - misc cleanups (Chaitanya Kulkarni) - major refactoring of the scanning code (Christoph Hellwig) - MD updates via Song: - Bug fixes in bitmap code, from Zhao Heming - Fix a work queue check, from Guoqing Jiang - Fix raid5 oops with reshape, from Song Liu - Clean up unused code, from Jason Yan - Discard improvements, from Xiao Ni - raid5/6 page offset support, from Yufen Yu - Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap, Hannes) - null_blk open/active zone limit support (Niklas) - Set of bcache updates (Coly, Dongsheng, Qinglang)" * tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits) md/raid5: fix oops during stripe resizing md/bitmap: fix memory leak of temporary bitmap md: fix the checking of wrong work queue md/bitmap: md_bitmap_get_counter returns wrong blocks md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks md/raid0: remove unused function is_io_in_chunk_boundary() nvme-core: remove extra condition for vwc nvme-core: remove extra variable nvme: remove nvme_identify_ns_list nvme: refactor nvme_validate_ns nvme: move nvme_validate_ns nvme: query namespace identifiers before adding the namespace nvme: revalidate zone bitmaps in nvme_update_ns_info nvme: remove nvme_update_formats nvme: update the known admin effects nvme: set the queue limits in nvme_update_ns_info nvme: remove the 0 lba_shift check in nvme_update_ns_info nvme: clean up the check for too large logic block sizes nvme: freeze the queue over ->lba_shift updates nvme: factor out a nvme_configure_metadata helper ...
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds35-1405/+2360
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-10-13Merge branch 'work.iov_iter' of ↵Linus Torvalds1-10/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull compat iovec cleanups from Al Viro: "Christoph's series around import_iovec() and compat variant thereof" * 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: security/keys: remove compat_keyctl_instantiate_key_iov mm: remove compat_process_vm_{readv,writev} fs: remove compat_sys_vmsplice fs: remove the compat readv/writev syscalls fs: remove various compat readv/writev helpers iov_iter: transparently handle compat iovecs in import_iovec iov_iter: refactor rw_copy_check_uvector and import_iovec iov_iter: move rw_copy_check_uvector() into lib/iov_iter.c compat.h: fix a spelling error in <linux/compat.h>
2020-10-09blk-mq: move cancel of hctx->run_work to the front of blk_exit_queueYang Yang2-3/+8
blk_exit_queue will free elevator_data, while blk_mq_run_work_fn will access it. Move cancel of hctx->run_work to the front of blk_exit_queue to avoid use-after-free. Fixes: 1b97871b501f ("blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release") Signed-off-by: Yang Yang <yang.yang@vivo.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09blk-mq: get rid of the dead flush handle code pathYufen Yu1-6/+0
After commit 923218f6166a ("blk-mq: don't allocate driver tag upfront for flush rq"), blk_mq_submit_bio() will call blk_insert_flush() directly to handle flush request rather than blk_mq_sched_insert_request() in the case of elevator. Then, all flush request either have set RQF_FLUSH_SEQ flag when call blk_mq_sched_insert_request(), or have inserted into hctx->dispatch. So, remove the dead code path. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09block: get rid of unnecessary local variableYufen Yu1-3/+1
Since whole elevator register is protectd by sysfs_lock, we don't need extras 'has_elevator'. Just use q->elevator directly. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09block: fix comment and add lockdep assertYufen Yu1-10/+4
After commit b89f625e28d4 ("block: don't release queue's sysfs lock during switching elevator"), whole elevator register and unregister function are covered by sysfs_lock. So, remove wrong comment and add lockdep assert. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09blk-mq: use helper function to test hw stoppedYufen Yu1-1/+1
We have introduced helper function blk_mq_hctx_stopped() to test BLK_MQ_S_STOPPED. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09block: use helper function to test queue registerYufen Yu2-2/+2
We have defined common interface blk_queue_registered() to test QUEUE_FLAG_REGISTERED. Just use it. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09block: remove redundant mq checkYufen Yu1-2/+2
elv_support_iosched() will check queue_is_mq() for us. So, remove the redundant check to clean code. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09block: invoke blk_mq_exit_sched no matter whether have .exit_schedYufen Yu2-3/+1
We will register debugfs for scheduler no matter whether it have defined callback funciton .exit_sched. So, blk_mq_exit_sched() is always needed to unregister debugfs. Also, q->elevator should be set as NULL after exiting scheduler. For now, since all register scheduler have defined .exit_sched, it will not cause any actual problem. But It will be more reasonable to do this change. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09Merge tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-blockLinus Torvalds2-4/+4
Pull block fixes from Jens Axboe: "A few fixes that should go into this release: - NVMe controller error path reference fix (Chaitanya) - Fix regression with IBM partitions on non-dasd devices (Christoph) - Fix a missing clear in the compat CDROM packet structure (Peilin)" * tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-block: partitions/ibm: fix non-DASD devices nvme-core: put ctrl ref when module ref get fail block/scsi-ioctl: Fix kernel-infoleak in scsi_put_cdrom_generic_arg()
2020-10-08block: ratelimit handle_bad_sector() messageTetsuo Handa1-5/+4
syzbot is reporting unkillable task [1], for the caller is failing to handle a corrupted filesystem image which attempts to access beyond the end of the device. While we need to fix the caller, flooding the console with handle_bad_sector() message is unlikely useful. [1] https://syzkaller.appspot.com/bug?id=f1f49fb971d7a3e01bd8ab8cff2ff4572ccf3092 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-08blk-throttle: Re-use the throtl_set_slice_end()Baolin Wang1-1/+1
Re-use throtl_set_slice_end() to remove duplicate code. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-08blk-throttle: Open code __throtl_de/enqueue_tg()Baolin Wang1-17/+9
The __throtl_de/enqueue_tg() functions are only be called by throtl_de/enqueue_tg(), thus we can just open code them to make code more readable. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-08blk-throttle: Move service tree validation out of the throtl_rb_first()Baolin Wang1-4/+5
The throtl_schedule_next_dispatch() will validate if the service queue is empty before calling update_min_dispatch_time(), and the update_min_dispatch_time() will call throtl_rb_first(), which will validate service queue again. Thus we can move the service queue validation out of the throtl_rb_first() to remove the redundant validation in the fast path. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-08blk-throttle: Move the list operation after list validationBaolin Wang1-2/+4
We should move the list operation after validation. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-08blk-throttle: Fix IO hang for a corner caseBaolin Wang1-4/+4
It can not scale up in throtl_adjusted_limit() if we set bps or iops is 1, which will cause IO hang when enable low limit. Thus we should treat 1 as a illegal value to avoid this issue. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-08blk-throttle: Avoid tracking latency if low limit is invalidBaolin Wang1-1/+3
The IO latency tracking is only for LOW limit, so we should add a validation to avoid redundant latency tracking if the LOW limit is not valid. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-08blk-throttle: Avoid getting the current time if tg->last_finish_time is 0Baolin Wang1-2/+6
We only update the tg->last_finish_time when the low limitaion is enabled, so we can move the tg->last_finish_time validation a little forward to avoid getting the unnecessary current time stamp if the the low limitation is not enabled. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-08blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()Baolin Wang1-3/+3
The throtl_downgrade_state() is always used to change to LIMIT_LOW limitation, thus remove the latter meaningless parameter which indicates the limitation index. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-08block: Remove redundant 'return' statementBaolin Wang2-2/+2
Remove redundant 'return' statement for 'void' functions. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-08dm: fix request-based DM to not bounce through indirect dm_submit_bioMike Snitzer1-1/+0
It is unnecessary to force request-based DM to call into bio-based dm_submit_bio (via indirect disk->fops->submit_bio) only to have it then call blk_mq_submit_bio(). Fix this by establishing a request-based DM block_device_operations (dm_rq_blk_dops, which doesn't have .submit_bio) and update dm_setup_md_queue() to set md->disk->fops to it for DM_TYPE_REQUEST_BASED. Remove DM_TYPE_REQUEST_BASED conditional in dm_submit_bio and unexport blk_mq_submit_bio. Fixes: c62b37d96b6eb ("block: move ->make_request_fn to struct block_device_operations") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-10-07partitions/ibm: fix non-DASD devicesChristoph Hellwig1-4/+3
Don't error out if the dasd_biodasdinfo symbol is not available. Cc: stable@vger.kernel.org Fixes: 26d7e28e3820 ("s390/dasd: remove ioctl_by_bdev calls") Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-06block: Consider only dispatched requests for inflight statisticGabriel Krisman Bertazi1-1/+1
According to Documentation/block/stat.rst, inflight should not include I/O requests that are in the queue but not yet dispatched to the device, but blk-mq identifies as inflight any request that has a tag allocated, which, for queues without elevator, happens at request allocation time and before it is queued in the ctx (default case in blk_mq_submit_bio). In addition, current behavior is different for queues with elevator from queues without it, since for the former the driver tag is allocated at dispatch time. A more precise approach would be to only consider requests with state MQ_RQ_IN_FLIGHT. This effectively reverts commit 6131837b1de6 ("blk-mq: count allocated but not started requests in iostats inflight") to consolidate blk-mq behavior with itself (elevator case) and with original documentation, but it differs from the behavior used by the legacy path. This version differs from v1 by using blk_mq_rq_state to access the state attribute. Avoid using blk_mq_request_started, which was suggested, since we don't want to include MQ_RQ_COMPLETE. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Cc: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-06block: move blk_mq_sched_try_merge to blk-merge.cChristoph Hellwig3-63/+50
Move blk_mq_sched_try_merge to blk-merge.c, which allows to mark a lot of the merge infrastructure static there. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-06block: remove the unused blk_integrity_merge_bio exportChristoph Hellwig2-1/+7
Also move the definition from the public blkdev.h to the private block/blk.h header. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-06block: remove the unused blk_integrity_merge_rq exportChristoph Hellwig2-1/+8
Also move the definition from the public blkdev.h to the private block/blk.h header. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-05block: warn if !__GFP_DIRECT_RECLAIM in bio_crypt_set_ctx()Eric Biggers1-1/+9
bio_crypt_set_ctx() assumes its gfp_mask argument always includes __GFP_DIRECT_RECLAIM, so that the mempool_alloc() will always succeed. For now this assumption is still fine, since no callers violate it. Making bio_crypt_set_ctx() able to fail would add unneeded complexity. However, if a caller didn't use __GFP_DIRECT_RECLAIM, it would be very hard to notice the bug. Make it easier by adding a WARN_ON_ONCE(). Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Satya Tangirala <satyat@google.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Satya Tangirala <satyat@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-05block: make blk_crypto_rq_bio_prep() able to failEric Biggers4-20/+34
blk_crypto_rq_bio_prep() assumes its gfp_mask argument always includes __GFP_DIRECT_RECLAIM, so that the mempool_alloc() will always succeed. However, blk_crypto_rq_bio_prep() might be called with GFP_ATOMIC via setup_clone() in drivers/md/dm-rq.c. This case isn't currently reachable with a bio that actually has an encryption context. However, it's fragile to rely on this. Just make blk_crypto_rq_bio_prep() able to fail. Suggested-by: Satya Tangirala <satyat@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Satya Tangirala <satyat@google.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-05block: make bio_crypt_clone() able to failEric Biggers3-22/+22
bio_crypt_clone() assumes its gfp_mask argument always includes __GFP_DIRECT_RECLAIM, so that the mempool_alloc() will always succeed. However, bio_crypt_clone() might be called with GFP_ATOMIC via setup_clone() in drivers/md/dm-rq.c, or with GFP_NOWAIT via kcryptd_io_read() in drivers/md/dm-crypt.c. Neither case is currently reachable with a bio that actually has an encryption context. However, it's fragile to rely on this. Just make bio_crypt_clone() able to fail, analogous to bio_integrity_clone(). Reported-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Satya Tangirala <satyat@google.com> Cc: Satya Tangirala <satyat@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-05block: add a bdget_part helperChristoph Hellwig2-2/+2
All remaining callers of bdget() outside of fs/block_dev.c want to get a reference to the struct block_device for a given struct hd_struct. Add a helper just for that and then mark bdget static. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-03iov_iter: transparently handle compat iovecs in import_iovecChristoph Hellwig1-10/+2
Use in compat_syscall to import either native or the compat iovecs, and remove the now superflous compat_import_iovec. This removes the need for special compat logic in most callers, and the remaining ones can still be simplified by using __import_iovec with a bool compat parameter. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-10-03block: scsi_ioctl: Avoid the use of one-element arraysGustavo A. R. Silva1-3/+3
One-element arrays are being deprecated[1]. Replace the one-element array with a simple object of type compat_caddr_t: 'compat_caddr_t unused'[2], once it seems this field is actually never used. Also, update struct cdrom_generic_command in UAPI by adding an anonimous union to avoid using the one-element array _reserved_. [1] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays [2] https://github.com/KSPP/linux/issues/86 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/lkml/5f76f5d0.qJ4t%2FHWuRzSW7bTa%25lkp@intel.com/ Build-tested-by: kernel test robot <lkp@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-03Merge tag 'block-5.9-2020-10-02' of git://git.kernel.dk/linux-blockLinus Torvalds1-9/+9
Pull block fix from Jens Axboe: "Single fix for a ->commit_rqs failure case" * tag 'block-5.9-2020-10-02' of git://git.kernel.dk/linux-block: blk-mq: call commit_rqs while list empty but error happen
2020-10-02block/scsi-ioctl: Fix kernel-infoleak in scsi_put_cdrom_generic_arg()Peilin Ye1-0/+1
scsi_put_cdrom_generic_arg() is copying uninitialized stack memory to userspace, since the compiler may leave a 3-byte hole in the middle of `cgc32`. Fix it by adding a padding field to `struct compat_cdrom_generic_command`. Cc: stable@vger.kernel.org Fixes: f3ee6e63a9df ("compat_ioctl: move CDROM_SEND_PACKET handling into scsi") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Reported-by: syzbot+85433a479a646a064ab3@syzkaller.appspotmail.com Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-29Merge remote-tracking branch 'jens/for-5.10/block' into dm-5.10Mike Snitzer28-1250/+2194
DM depends on these block 5.10 commits: 22ada802ede8 block: use lcm_not_zero() when stacking chunk_sectors 07d098e6bbad block: allow 'chunk_sectors' to be non-power-of-2 021a24460dc2 block: add QUEUE_FLAG_NOWAIT 6abc49468eea dm: add support for REQ_NOWAIT and enable it for linear target Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29block-mq: fix comments in blk_mq_queue_tag_busy_iteryangerkun1-3/+1
'f5bbbbe4d635 ("blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter")' introduce a bug what we may sleep between rcu lock. Then '530ca2c9bd69 ("blk-mq: Allow blocking queue tag iter callbacks")' fix it by get request_queue's ref. And 'a9a808084d6a ("block: Remove the synchronize_rcu() call from __blk_mq_update_nr_hw_queues()")' remove the synchronize_rcu in __blk_mq_update_nr_hw_queues. We need update the confused comments in blk_mq_queue_tag_busy_iter. Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-29blk-mq: call commit_rqs while list empty but error happenyangerkun1-9/+9
Blk-mq should call commit_rqs once 'bd.last != true' and no more request will come(so virtscsi can kick the virtqueue, e.g.). We already do that in 'blk_mq_dispatch_rq_list/blk_mq_try_issue_list_directly' while list not empty and 'queued > 0'. However, we can seen the same scene once the last request in list call queue_rq and return error like BLK_STS_IOERR which will not requeue the request, and lead that list empty but need call commit_rqs too(Or the request for virtscsi will stay timeout until other request kick virtqueue). We found this problem by do fsstress test with offline/online virtscsi device repeat quickly. Fixes: d666ba98f849 ("blk-mq: add mq_ops->commit_rqs()") Reported-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-28blk-mq: add cond_resched() in __blk_mq_alloc_rq_maps()Xianting Tian1-1/+3
We found blk_mq_alloc_rq_maps() takes more time in kernel space when testing nvme device hot-plugging. The test and anlysis as below. Debug code, 1, blk_mq_alloc_rq_maps(): u64 start, end; depth = set->queue_depth; start = ktime_get_ns(); pr_err("[%d:%s switch:%ld,%ld] queue depth %d, nr_hw_queues %d\n", current->pid, current->comm, current->nvcsw, current->nivcsw, set->queue_depth, set->nr_hw_queues); do { err = __blk_mq_alloc_rq_maps(set); if (!err) break; set->queue_depth >>= 1; if (set->queue_depth < set->reserved_tags + BLK_MQ_TAG_MIN) { err = -ENOMEM; break; } } while (set->queue_depth); end = ktime_get_ns(); pr_err("[%d:%s switch:%ld,%ld] all hw queues init cost time %lld ns\n", current->pid, current->comm, current->nvcsw, current->nivcsw, end - start); 2, __blk_mq_alloc_rq_maps(): u64 start, end; for (i = 0; i < set->nr_hw_queues; i++) { start = ktime_get_ns(); if (!__blk_mq_alloc_rq_map(set, i)) goto out_unwind; end = ktime_get_ns(); pr_err("hw queue %d init cost time %lld ns\n", i, end - start); } Test nvme hot-plugging with above debug code, we found it totally cost more than 3ms in kernel space without being scheduled out when alloc rqs for all 16 hw queues with depth 1023, each hw queue cost about 140-250us. The cost time will be increased with hw queue number and queue depth increasing. And in an extreme case, if __blk_mq_alloc_rq_maps() returns -ENOMEM, it will try "queue_depth >>= 1", more time will be consumed. [ 428.428771] nvme nvme0: pci function 10000:01:00.0 [ 428.428798] nvme 10000:01:00.0: enabling device (0000 -> 0002) [ 428.428806] pcieport 10000:00:00.0: can't derive routing for PCI INT A [ 428.428809] nvme 10000:01:00.0: PCI INT A: no GSI [ 432.593374] [4688:kworker/u33:8 switch:663,2] queue depth 30, nr_hw_queues 1 [ 432.593404] hw queue 0 init cost time 22883 ns [ 432.593408] [4688:kworker/u33:8 switch:663,2] all hw queues init cost time 35960 ns [ 432.595953] nvme nvme0: 16/0/0 default/read/poll queues [ 432.595958] [4688:kworker/u33:8 switch:700,2] queue depth 1023, nr_hw_queues 16 [ 432.596203] hw queue 0 init cost time 242630 ns [ 432.596441] hw queue 1 init cost time 235913 ns [ 432.596659] hw queue 2 init cost time 216461 ns [ 432.596877] hw queue 3 init cost time 215851 ns [ 432.597107] hw queue 4 init cost time 228406 ns [ 432.597336] hw queue 5 init cost time 227298 ns [ 432.597564] hw queue 6 init cost time 224633 ns [ 432.597785] hw queue 7 init cost time 219954 ns [ 432.597937] hw queue 8 init cost time 150930 ns [ 432.598082] hw queue 9 init cost time 143496 ns [ 432.598231] hw queue 10 init cost time 147261 ns [ 432.598397] hw queue 11 init cost time 164522 ns [ 432.598542] hw queue 12 init cost time 143401 ns [ 432.598692] hw queue 13 init cost time 148934 ns [ 432.598841] hw queue 14 init cost time 147194 ns [ 432.598991] hw queue 15 init cost time 148942 ns [ 432.598993] [4688:kworker/u33:8 switch:700,2] all hw queues init cost time 3035099 ns [ 432.602611] nvme0n1: p1 So use this patch to trigger schedule between each hw queue init, to avoid other threads getting stuck. It is not in atomic context when executing __blk_mq_alloc_rq_maps(), so it is safe to call cond_resched(). Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-26Merge tag 'scsi-fixes' of ↵Linus Torvalds1-0/+46
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes: one in drivers (lpfc) and two for zoned block devices. The latter also impinges on the block layer but only to introduce a new block API for setting the zone model rather than fiddling with the queue directly in the zoned block driver" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: sd_zbc: Fix ZBC disk initialization scsi: sd: sd_zbc: Fix handling of host-aware ZBC disks scsi: lpfc: Fix initial FLOGI failure due to BBSCN not supported
2020-09-25iocost: consider iocgs with active delays for debt forgivenessTejun Heo1-4/+7
An iocg may have 0 debt but non-zero delay. The current debt forgiveness logic doesn't act on such iocgs. This can lead to unexpected behaviors - an iocg with a little bit of debt will have its delay canceled through debt forgiveness but one w/o any debt but active delay will have to wait out until its delay decays out. This patch updates the debt handling logic so that it treats delays the same as debts. If either debt or delay is active, debt forgiveness logic kicks in and acts on both the same way. Also, avoid turning the debt and delay directly to zero as that can confuse state transitions. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25iocost: add iocg_forgive_debt tracepointTejun Heo1-0/+12
Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-08 20:50:22 +0300