summaryrefslogtreecommitdiff
path: root/block/blk.h
AgeCommit message (Collapse)AuthorFilesLines
2021-08-31Merge tag 'io_uring-bio-cache.5-2021-08-30' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+7
Pull support for struct bio recycling from Jens Axboe: "This adds bio recycling support for polled IO, allowing quick reuse of a bio for high IOPS scenarios via a percpu bio_set list. It's good for almost a 10% improvement in performance, bumping our per-core IO limit from ~3.2M IOPS to ~3.5M IOPS" * tag 'io_uring-bio-cache.5-2021-08-30' of git://git.kernel.dk/linux-block: bio: improve kerneldoc documentation for bio_alloc_kiocb() block: provide bio_clear_hipri() helper block: use the percpu bio cache in __blkdev_direct_IO io_uring: enable use of bio alloc cache block: clear BIO_PERCPU_CACHE flag if polling isn't supported bio: add allocation cache abstraction fs: add kiocb alloc cache flag bio: optimize initialization of a bio
2021-08-31Merge tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-blockLinus Torvalds1-9/+11
Pull block updates from Jens Axboe: "Nothing major in here - lots of good cleanups and tech debt handling, which is also evident in the diffstats. In particular: - Add disk sequence numbers (Matteo) - Discard merge fix (Ming) - Relax disk zoned reporting restrictions (Niklas) - Bio error handling zoned leak fix (Pavel) - Start of proper add_disk() error handling (Luis, Christoph) - blk crypto fix (Eric) - Non-standard GPT location support (Dmitry) - IO priority improvements and cleanups (Damien)o - blk-throtl improvements (Chunguang) - diskstats_show() stack reduction (Abd-Alrhman) - Loop scheduler selection (Bart) - Switch block layer to use kmap_local_page() (Christoph) - Remove obsolete disk_name helper (Christoph) - block_device refcounting improvements (Christoph) - Ensure gendisk always has a request queue reference (Christoph) - Misc fixes/cleanups (Shaokun, Oliver, Guoqing)" * tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits) sg: pass the device name to blk_trace_setup block, bfq: cleanup the repeated declaration blk-crypto: fix check for too-large dun_bytes blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN blk-zoned: allow zone management send operations without CAP_SYS_ADMIN block: mark blkdev_fsync static block: refine the disk_live check in del_gendisk mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA mmc: block: Support alternative_gpt_sector() operation partitions/efi: Support non-standard GPT location block: Add alternative_gpt_sector() operation bio: fix page leak bio_add_hw_page failure block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT block: remove a pointless call to MINOR() in device_add_disk null_blk: add error handling support for add_disk() virtio_blk: add error handling support for add_disk() block: add error handling for device_add_disk / add_disk block: return errors from disk_alloc_events block: return errors from blk_integrity_add block: call blk_register_queue earlier in device_add_disk ...
2021-08-23block: provide bio_clear_hipri() helperJens Axboe1-0/+7
Any case that turns off REQ_HIPRI must also clear BIO_PERCPU_CACHE, as non-polled IO may complete through hard/soft IRQ and hence isn't safe for our polled bio alloc cache. Provide a helper that does just that, and use it in the merging code as well if we split a bio and turn off polling. Fixes: be863b9e4348 ("block: clear BIO_PERCPU_CACHE flag if polling isn't supported") Reported-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23block: return errors from disk_alloc_eventsLuis Chamberlain1-1/+1
Prepare for proper error handling in add_disk. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: split from a larger patch] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210818144542.19305-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23block: return errors from blk_integrity_addLuis Chamberlain1-2/+3
Prepare for proper error handling in add_disk. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: split from a larger patch] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210818144542.19305-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-18blk-mq: fix is_flush_rqMing Lei1-5/+1
is_flush_rq() is called from bt_iter()/bt_tags_iter(), and runs the following check: hctx->fq->flush_rq == req but the passed hctx from bt_iter()/bt_tags_iter() may be NULL because: 1) memory re-order in blk_mq_rq_ctx_init(): rq->mq_hctx = data->hctx; ... refcount_set(&rq->ref, 1); OR 2) tag re-use and ->rqs[] isn't updated with new request. Fix the issue by re-writing is_flush_rq() as: return rq->end_io == flush_end_io; which turns out simpler to follow and immune to data race since we have ordered WRITE rq->end_io and refcount_set(&rq->ref, 1). Fixes: 2e315dc07df0 ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter") Cc: "Blank-Burian, Markus, Dr." <blankburian@uni-muenster.de> Cc: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210818010925.607383-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-15blk-throtl: optimize IOPS throttle for large IO scenariosChunguang Xu1-0/+2
After patch 54efd50 (block: make generic_make_request handle arbitrarily sized bios), the IO through io-throttle may be larger, and these IOs may be further split into more small IOs. However, IOPS throttle does not seem to be aware of this change, which makes the calculation of IOPS of large IOs incomplete, resulting in disk-side IOPS that does not meet expectations. Maybe we should fix this problem. We can reproduce it by set max_sectors_kb of disk to 128, set blkio.write_iops_throttle to 100, run a dd instance inside blkio and use iostat to watch IOPS: dd if=/dev/zero of=/dev/sdb bs=1M count=1000 oflag=direct As a result, without this change the average IOPS is 1995, with this change the IOPS is 98. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/65869aaad05475797d63b4c3fed4f529febe3c26.1627876014.git.brookxu@tencent.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-12block: pass a gendisk to bdev_resize_partitionChristoph Hellwig1-2/+2
bdev_resize_partition can only operate on the whole device. Make that clear by passing a gendisk instead of a block_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210810154512.1809898-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-12block: pass a gendisk to bdev_del_partitionChristoph Hellwig1-1/+1
bdev_del_partition can only operate on the whole device. Make that clear by passing a gendisk instead of a block_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210810154512.1809898-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-12block: pass a gendisk to bdev_add_partitionChristoph Hellwig1-2/+2
bdev_add_partition can only operate on the whole device. Make that clear by passing a gendisk instead of a block_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210810154512.1809898-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02block: remove disk_name()Christoph Hellwig1-1/+0
Remove the disk_name function now that all users are gone. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20210727062518.122108-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-25blk: Fix lock inversion between ioc lock and bfqd lockJan Kara1-1/+1
Lockdep complains about lock inversion between ioc->lock and bfqd->lock: bfqd -> ioc: put_io_context+0x33/0x90 -> ioc->lock grabbed blk_mq_free_request+0x51/0x140 blk_put_request+0xe/0x10 blk_attempt_req_merge+0x1d/0x30 elv_attempt_insert_merge+0x56/0xa0 blk_mq_sched_try_insert_merge+0x4b/0x60 bfq_insert_requests+0x9e/0x18c0 -> bfqd->lock grabbed blk_mq_sched_insert_requests+0xd6/0x2b0 blk_mq_flush_plug_list+0x154/0x280 blk_finish_plug+0x40/0x60 ext4_writepages+0x696/0x1320 do_writepages+0x1c/0x80 __filemap_fdatawrite_range+0xd7/0x120 sync_file_range+0xac/0xf0 ioc->bfqd: bfq_exit_icq+0xa3/0xe0 -> bfqd->lock grabbed put_io_context_active+0x78/0xb0 -> ioc->lock grabbed exit_io_context+0x48/0x50 do_exit+0x7e9/0xdd0 do_group_exit+0x54/0xc0 To avoid this inversion we change blk_mq_sched_try_insert_merge() to not free the merged request but rather leave that upto the caller similarly to blk_mq_sched_try_merge(). And in bfq_insert_requests() we make sure to free all the merged requests after dropping bfqd->lock. Fixes: aee69d78dec0 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler") Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210623093634.27879-3-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24block: add the events* attributes to disk_attrsChristoph Hellwig1-0/+3
Add the events attributes to the disk_attrs array, which ensures they are added by the driver core when the device is created rather than adding them after the device has been added, which is racy versus uevents and requires more boilerplate code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210624073843.251178-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24block: move the disk events code to a separate fileChristoph Hellwig1-0/+5
Move the code for handling disk events from genhd.c into a new file as it isn't very related to the rest of the file while at the same time requiring lots of forward declarations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210624073843.251178-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-11blk-mq: improve the blk_mq_init_allocated_queue interfaceChristoph Hellwig1-1/+0
Don't return the passed in request_queue but a normal error code, and drop the elevator_init argument in favor of just calling elevator_init_mq directly from dm-rq. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Link: https://lore.kernel.org/r/20210602065345.355274-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-01block: unexport blk_alloc_queueChristoph Hellwig1-0/+2
blk_alloc_queue is just an internal helper now, unexport it and remove it from the public header. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210521055116.1053587-27-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-01block: refactor device number setup in __device_add_diskChristoph Hellwig1-2/+2
Untangle the mess around blk_alloc_devt by moving the check for the used allocation scheme into the callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210521055116.1053587-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-08block: refactor blk_drop_partitionsChristoph Hellwig1-1/+0
Move the busy check and disk-wide sync into the only caller, so that the remainder can be shared with del_gendisk. Also pass the gendisk instead of the bdev as that is all that is needed. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210406062303.811835-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06block: refactor the bounce buffering codeChristoph Hellwig1-4/+12
Get rid of all the PFN arithmetics and just use an enum for the two remaining options, and use PageHighMem for the actual bounce decision. Add a fast path to entirely avoid the call for the common case of a queue not using the legacy bouncing code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210331073001.46776-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06block: remove BLK_BOUNCE_ISA supportChristoph Hellwig1-5/+0
Remove the BLK_BOUNCE_ISA support now that all users are gone. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210331073001.46776-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10block: introduce blk_queue_clear_zone_settings()Damien Le Moal1-0/+2
Introduce the internal function blk_queue_clear_zone_settings() to cleanup all limits and resources related to zoned block devices. This new function is called from blk_queue_set_zoned() when a disk zoned model is set to BLK_ZONED_NONE. This particular case can happens when a partition is created on a host-aware scsi disk. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-08block: use bi_max_vecs to find the bvec poolChristoph Hellwig1-3/+3
Instead of encoding of the bvec pool using magic bio flags, just use a helper to find the pool based on the max_vecs value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-08block: reuse BIO_INLINE_VECS for integrity bvecsChristoph Hellwig1-0/+1
bvec_alloc always uses biovec_slabs, and thus always needs to use the same number of inline vecs. Share a single definition for the data and integrity bvecs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25block: move three bvec helpers declaration into private helperMing Lei1-0/+4
bvec_alloc(), bvec_free() and bvec_nr_vecs() are only used inside block layer core functions, no need to declare them in public header. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25block: use an xarray for disk->part_tblChristoph Hellwig1-1/+0
Now that no fast path lookups in the partition table are left, there is no point in micro-optimizing the data structure for it. Just use a bog standard xarray. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25blk-mq: use ->bi_bdev for I/O accountingChristoph Hellwig1-2/+0
Remove the reverse map from a sector to a partition for I/O accounting by simply using ->bi_bdev. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25block: store a block_device pointer in struct bioChristoph Hellwig1-2/+0
Replace the gendisk pointer in struct bio with a pointer to the newly improved struct block device. From that the gendisk can be trivially accessed with an extra indirection, but it also allows to directly look up all information related to partition remapping. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-17Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds1-12/+0
Pull block driver updates from Jens Axboe: "Nothing major in here: - NVMe pull request from Christoph: - nvmet passthrough improvements (Chaitanya Kulkarni) - fcloop error injection support (James Smart) - read-only support for zoned namespaces without Zone Append (Javier González) - improve some error message (Minwoo Im) - reject I/O to offline fabrics namespaces (Victor Gladkov) - PCI queue allocation cleanups (Niklas Schnelle) - remove an unused allocation in nvmet (Amit Engel) - a Kconfig spelling fix (Colin Ian King) - nvme_req_qid simplication (Baolin Wang) - MD pull request from Song: - Fix race condition in md_ioctl() (Dae R. Jeong) - Initialize read_slot properly for raid10 (Kevin Vigor) - Code cleanup (Pankaj Gupta) - md-cluster resync/reshape fix (Zhao Heming) - Move null_blk into its own directory (Damien Le Moal) - null_blk zone and discard improvements (Damien Le Moal) - bcache race fix (Dongsheng Yang) - Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang, Lutz Pogrell, Md Haris Iqbal) - lightnvm NULL pointer deref fix (tangzhenhao) - sr in_interrupt() removal (Sebastian Andrzej Siewior) - FC endpoint security support for s390/dasd (Jan Höppner, Sebastian Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included as it made it easier for them to funnel the feature through the block driver tree. - Follow up fixes (Colin Ian King)" * tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits) block: drop dead assignments in loop_init() sr: Remove in_interrupt() usage in sr_init_command(). sr: Switch the sector size back to 2048 if sr_read_sector() changed it. cdrom: Reset sector_size back it is not 2048. drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c null_blk: Move driver into its own directory null_blk: Allow controlling max_hw_sectors limit null_blk: discard zones on reset null_blk: cleanup discard handling null_blk: Improve implicit zone close null_blk: improve zone locking block: Align max_hw_sectors to logical blocksize null_blk: Fail zone append to conventional zones null_blk: Fix zone size initialization bcache: fix race between setting bdev state to none and new write request direct to backing block/rnbd: fix a null pointer dereference on dev->blk_symlink_name block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name block/rnbd: call kobject_put in the failure path Documentation/ABI/rnbd-srv: add document for force_close block/rnbd-srv: close a mapped device from server side. ...
2020-12-08Revert "block: Fix a lockdep complaint triggered by request queue flushing"Ming Lei1-1/+0
This reverts commit b3c6a59975415bde29cfd76ff1ab008edbf614a9. Now we can avoid nvme-loop lockdep warning of 'lockdep possible recursive locking' by nvme-loop's lock class, no need to apply dynamically allocated lock class key, so revert commit b3c6a5997541("block: Fix a lockdep complaint triggered by request queue flushing"). This way fixes horrible SCSI probe delay issue on megaraid_sas, and it is reported the whole probe may take more than half an hour. Tested-by: Kashyap Desai <kashyap.desai@broadcom.com> Reported-by: Qian Cai <cai@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: John Garry <john.garry@huawei.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02block: merge struct block_device and struct hd_structChristoph Hellwig1-1/+1
Instead of having two structures that represent each block device with different life time rules, merge them into a single one. This also greatly simplifies the reference counting rules, as we can use the inode reference count as the main reference count for the new struct block_device, with the device model reference front ending it for device model interaction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02block: pass a block_device to blk_alloc_devtChristoph Hellwig1-1/+1
Pass the block_device actually needed instead of the hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02block: switch partition lookup to use struct block_deviceChristoph Hellwig1-2/+2
Use struct block_device to lookup partitions on a disk. This removes all usage of struct hd_struct from the I/O path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02block: allocate struct hd_struct as part of struct bdev_inodeChristoph Hellwig1-21/+0
Allocate hd_struct together with struct block_device to pre-load the lifetime rule changes in preparation of merging the two structures. Note that part0 was previously embedded into struct gendisk, but is a separate allocation now, and already points to the block_device instead of the hd_struct. The lifetime of struct gendisk is still controlled by the struct device embedded in the part0 hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02block: move the partition_meta_info to struct block_deviceChristoph Hellwig1-1/+0
Move the partition_meta_info to struct block_device in preparation for killing struct hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02block: move disk stat accounting to struct block_deviceChristoph Hellwig1-1/+0
Move the dkstats and stamp field to struct block_device in preparation of killing struct hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02block: remove the nr_sects field in struct hd_structChristoph Hellwig1-53/+0
Now that the hd_struct always has a block device attached to it, there is no need for having two size field that just get out of sync. Additionally the field in hd_struct did not use proper serialization, possibly allowing for torn writes. By only using the block_device field this problem also gets fixed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02block: simplify bdev/disk lookup in blkdev_getChristoph Hellwig1-1/+1
To simplify block device lookup and a few other upcoming areas, make sure that we always have a struct block_device available for each disk and each partition, and only find existing block devices in bdget. The only downside of this is that each device and partition uses a little more memory. The upside will be that a lot of code can be simplified. With that all we need to look up the block device is to lookup the inode and do a few sanity checks on the gendisk, instead of the separate lookup for the gendisk. For blk-cgroup which wants to access a gendisk without opening it, a new blkdev_{get,put}_no_open low-level interface is added to replace the previous get_gendisk use. Note that the change to look up block device directly instead of the two step lookup using struct gendisk causes a subtile change in behavior: accessing a non-existing partition on an existing block device can now cause a call to request_module. That call is harmless, and in practice no recent system will access these nodes as they aren't created by udev and static /dev/ setups are unusual. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: move blk_rq_bio_prep() to linux/blk-mq.hChaitanya Kulkarni1-12/+0
This is a preparation patch to have minimal block layer request bio append functionality in the context of the NVMeOF Passthru driver which falls in the fast path and doesn't need calls from blk_rq_append_bio(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-06block: move blk_mq_sched_try_merge to blk-merge.cChristoph Hellwig1-19/+0
Move blk_mq_sched_try_merge to blk-merge.c, which allows to mark a lot of the merge infrastructure static there. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-06block: remove the unused blk_integrity_merge_bio exportChristoph Hellwig1-0/+7
Also move the definition from the public blkdev.h to the private block/blk.h header. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-06block: remove the unused blk_integrity_merge_rq exportChristoph Hellwig1-0/+8
Also move the definition from the public blkdev.h to the private block/blk.h header. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-02block: remove the disk argument to delete_partitionChristoph Hellwig1-1/+1
We can trivially derive the gendisk from the hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-02block: Add a new helper to attempt to merge a bioBaolin Wang1-6/+15
There are lots of duplicated code when trying to merge a bio from plug list and sw queue, we can introduce a new helper to attempt to merge a bio, which can simplify the blk_bio_list_merge() and blk_attempt_plug_merge(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-02block: Move blk_mq_bio_list_merge() into blk-merge.cBaolin Wang1-0/+2
Move the blk_mq_bio_list_merge() into blk-merge.c and rename it as a generic name. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-17block: improve discard bio alignment in __blkdev_issue_discard()Coly Li1-0/+14
This patch improves discard bio split for address and size alignment in __blkdev_issue_discard(). The aligned discard bio may help underlying device controller to perform better discard and internal garbage collection, and avoid unnecessary internal fragment. Current discard bio split algorithm in __blkdev_issue_discard() may have non-discarded fregment on device even the discard bio LBA and size are both aligned to device's discard granularity size. Here is the example steps on how to reproduce the above problem. - On a VMWare ESXi 6.5 update3 installation, create a 51GB virtual disk with thin mode and give it to a Linux virtual machine. - Inside the Linux virtual machine, if the 50GB virtual disk shows up as /dev/sdb, fill data into the first 50GB by, # dd if=/dev/zero of=/dev/sdb bs=4096 count=13107200 - Discard the 50GB range from offset 0 on /dev/sdb, # blkdiscard /dev/sdb -o 0 -l 53687091200 - Observe the underlying mapping status of the device # sg_get_lba_status /dev/sdb -m 1048 --lba=0 descriptor LBA: 0x0000000000000000 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000000000800 blocks: 16773120 deallocated descriptor LBA: 0x0000000000fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000001000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000017ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000001800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000001fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000002000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000027ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000002800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000002fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000003000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000037ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000003800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000003fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000004000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000047ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000004800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000004fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000005000000 blocks: 8386560 deallocated descriptor LBA: 0x00000000057ff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000005800000 blocks: 8386560 deallocated descriptor LBA: 0x0000000005fff800 blocks: 2048 mapped (or unknown) descriptor LBA: 0x0000000006000000 blocks: 6291456 deallocated descriptor LBA: 0x0000000006600000 blocks: 0 deallocated Although the discard bio starts at LBA 0 and has 50<<30 bytes size which are perfect aligned to the discard granularity, from the above list these are many 1MB (2048 sectors) internal fragments exist unexpectedly. The problem is in __blkdev_issue_discard(), an improper algorithm causes an improper bio size which is not aligned. 25 int __blkdev_issue_discard(struct block_device *bdev, sector_t sector, 26 sector_t nr_sects, gfp_t gfp_mask, int flags, 27 struct bio **biop) 28 { 29 struct request_queue *q = bdev_get_queue(bdev); [snipped] 56 57 while (nr_sects) { 58 sector_t req_sects = min_t(sector_t, nr_sects, 59 bio_allowed_max_sectors(q)); 60 61 WARN_ON_ONCE((req_sects << 9) > UINT_MAX); 62 63 bio = blk_next_bio(bio, 0, gfp_mask); 64 bio->bi_iter.bi_sector = sector; 65 bio_set_dev(bio, bdev); 66 bio_set_op_attrs(bio, op, 0); 67 68 bio->bi_iter.bi_size = req_sects << 9; 69 sector += req_sects; 70 nr_sects -= req_sects; [snipped] 79 } 80 81 *biop = bio; 82 return 0; 83 } 84 EXPORT_SYMBOL(__blkdev_issue_discard); At line 58-59, to discard a 50GB range, req_sects is set as return value of bio_allowed_max_sectors(q), which is 8388607 sectors. In the above case, the discard granularity is 2048 sectors, although the start LBA and discard length are aligned to discard granularity, req_sects never has chance to be aligned to discard granularity. This is why there are some still-mapped 2048 sectors fragment in every 4 or 8 GB range. If req_sects at line 58 is set to a value aligned to discard_granularity and close to UNIT_MAX, then all consequent split bios inside device driver are (almostly) aligned to discard_granularity of the device queue. The 2048 sectors still-mapped fragment will disappear. This patch introduces bio_aligned_discard_max_sectors() to return the the value which is aligned to q->limits.discard_granularity and closest to UINT_MAX. Then this patch replaces bio_allowed_max_sectors() with this new routine to decide a more proper split bio length. But we still need to handle the situation when discard start LBA is not aligned to q->limits.discard_granularity, otherwise even the length is aligned, current code may still leave 2048 fragment around every 4GB range. Therefore, to calculate req_sects, firstly the start LBA of discard range is checked (including partition offset), if it is not aligned to discard granularity, the first split location should make sure following bio has bi_sector aligned to discard granularity. Then there won't be still-mapped fragment in the middle of the discard range. The above is how this patch improves discard bio alignment in __blkdev_issue_discard(). Now with this patch, after discard with same command line mentiond previously, sg_get_lba_status returns, descriptor LBA: 0x0000000000000000 blocks: 106954752 deallocated descriptor LBA: 0x0000000006600000 blocks: 0 deallocated We an see there is no 2048 sectors segment anymore, everything is clean. Reported-and-tested-by: Acshai Manoj <acshai.manoj@microfocus.com> Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Xiao Ni <xni@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Enzo Matsumiya <ematsumiya@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-09blk-mq: centralise related handling into blk_mq_get_driver_tagMing Lei1-5/+0
Move .nr_active update and request assignment into blk_mq_get_driver_tag(), all are good to do during getting driver tag. Meantime blk-flush related code is simplified and flush request needn't to update the request table manually any more. Signed-off-by: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-02Revert "blk-mq: put driver tag when this request is completed"Jens Axboe1-0/+5
This reverts commits the following commits: 37f4a24c2469a10a4c16c641671bd766e276cf9f 723bf178f158abd1ce6069cb049581b3cb003aab 36a3df5a4574d5ddf59804fcd0c4e9654c514d9a The last one is the culprit, but we have to go a bit deeper to get this to revert cleanly. There's been a report that this breaks some MMC setups [1], and also causes an issue with swap [2]. Until this can be figured out, revert the offending commits. [1] https://lore.kernel.org/linux-block/57fb09b1-54ba-f3aa-f82c-d709b0e6b281@samsung.com/ [2] https://lore.kernel.org/linux-block/20200702043721.GA1087@lca.pw/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: move ->make_request_fn to struct block_device_operationsChristoph Hellwig1-2/+0
The make_request_fn is a little weird in that it sits directly in struct request_queue instead of an operation vector. Replace it with a block_device_operations method called submit_bio (which describes much better what it does). Also remove the request_queue argument to it, as the queue can be derived pretty trivially from the bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: remove the request_queue argument from blk_queue_splitChristoph Hellwig1-2/+1
The queue can be trivially derived from the bio, so pass one less argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30blk-mq: centralise related handling into blk_mq_get_driver_tagMing Lei1-5/+0
Move .nr_active update and request assignment into blk_mq_get_driver_tag(), all are good to do during getting driver tag. Meantime blk-flush related code is simplified and flush request needn't to update the request table manually any more. Signed-off-by: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>