summaryrefslogtreecommitdiff
path: root/block/blk-wbt.c
AgeCommit message (Collapse)AuthorFilesLines
2021-08-23block: add an explicit ->disk backpointer to the request_queueChristoph Hellwig1-5/+5
Replace the magic lookup through the kobject tree with an explicit backpointer, given that the device model links are set up and torn down at times when I/O is still possible, leading to potential NULL or invalid pointer dereferences. Fixes: edb0872f44ec ("block: move the bdi from the request_queue to the gendisk") Reported-by: syzbot <syzbot+aa0801b6b32dca9dda82@syzkaller.appspotmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Sven Schnelle <svens@linux.ibm.com> Link: https://lore.kernel.org/r/20210816134624.GA24234@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-09block: move the bdi from the request_queue to the gendiskChristoph Hellwig1-5/+5
The backing device information only makes sense for file system I/O, and thus belongs into the gendisk and not the lower level request_queue structure. Move it there. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210809141744.1203023-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22blk-wbt: make sure throttle is enabled properlyZhang Yi1-1/+5
After commit a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt"), if throttle was disabled by wbt_disable_default(), we could not enable again, fix this by set enable_state back to WBT_STATE_ON_DEFAULT. Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210619093700.920393-3-yi.zhang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22blk-wbt: introduce a new disable state to prevent false positive by ↵Zhang Yi1-2/+3
rwb_enabled() Now that we disable wbt by simply zero out rwb->wb_normal in wbt_disable_default() when switch elevator to bfq, but it's not safe because it will become false positive if we change queue depth. If it become false positive between wbt_wait() and wbt_track() when submit write request, it will lead to drop rqw->inflight to -1 in wbt_done(), which will end up trigger IO hung. Fix this issue by introduce a new state which mean the wbt was disabled. Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210619093700.920393-2-yi.zhang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-18blk-wbt: remove outdated commentlijiazi1-1/+0
Now wbt_wait() returns void, so remove now outdated comment. Signed-off-by: lijiazi <lijiazi@xiaomi.com> Link: https://lore.kernel.org/r/1623986240-13878-1-git-send-email-lijiazi@xiaomi.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26blk: wbt: remove unused parameter from wbt_should_throttleLei Chen1-2/+2
The first parameter rwb is not used for this function. So just remove it. Signed-off-by: Lei Chen <lennychen@tencent.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: wbt: Remove unnecessary invoking of wbt_update_limits in wbt_initLei Chen1-1/+0
It's unnecessary to call wbt_update_limits explicitly within wbt_init, because it will be called in the following function wbt_queue_depth_changed. Signed-off-by: Lei Chen <lennychen@tencent.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-05-30blk-wbt: rename __wbt_update_limits to wbt_update_limitsGuoqing Jiang1-4/+4
Now let's rename __wbt_update_limits to wbt_update_limits after the previous one is deleted. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-30blk-wbt: remove wbt_update_limitsGuoqing Jiang1-8/+0
No one call this function after commit 2af2783f2ea4f ("rq-qos: get rid of redundant wbt_update_limits()"), so remove it. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-17blk-wbt: Use tracepoint_string() for wbt_step tracepoint string literalsTommi Rantala1-2/+2
Use tracepoint_string() for string literals that are used in the wbt_step tracepoint, so that userspace tools can display the string content. Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-06blk-wbt: fix performance regression in wbt scale_up/scale_downHarshad Shirwadkar1-2/+4
scale_up wakes up waiters after scaling up. But after scaling max, it should not wake up more waiters as waiters will not have anything to do. This patch fixes this by making scale_up (and also scale_down) return when threshold is reached. This bug causes increased fdatasync latency when fdatasync and dd conv=sync are performed in parallel on 4.19 compared to 4.14. This bug was introduced during refactoring of blk-wbt code. Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") Cc: stable@vger.kernel.org Cc: Josef Bacik <jbacik@fb.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-29block/rq_qos: implement rq_qos_ops->queue_depth_changed()Tejun Heo1-10/+8
wbt already gets queue depth changed notification through wbt_set_queue_depth(). Generalize it into rq_qos_ops->queue_depth_changed() so that other rq_qos policies can easily hook into the events too. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27block: add helper for checking if queue is registeredMing Lei1-1/+1
There are 4 users which check if queue is registered, so add one helper to check it. Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01block: add SPDX tags to block layer files missing licensing informationChristoph Hellwig1-0/+1
Various block layer files do not have any licensing information at all. Add SPDX tags for the default kernel GPLv2 license to those. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-24blk-wbt: Declare local functions staticBart Van Assche1-2/+2
This patch avoids that sparse reports the following warnings: CHECK block/blk-wbt.c block/blk-wbt.c:600:6: warning: symbol 'wbt_issue' was not declared. Should it be static? block/blk-wbt.c:620:6: warning: symbol 'wbt_requeue' was not declared. Should it be static? CC block/blk-wbt.o block/blk-wbt.c:600:6: warning: no previous prototype for wbt_issue [-Wmissing-prototypes] void wbt_issue(struct rq_qos *rqos, struct request *rq) ^~~~~~~~~ block/blk-wbt.c:620:6: warning: no previous prototype for wbt_requeue [-Wmissing-prototypes] void wbt_requeue(struct rq_qos *rqos, struct request *rq) ^~~~~~~~~~~ Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-17blk-wbt: export internal state via debugfsMing Lei1-0/+91
This information is helpful to either investigate issues, or understand wbt's internal behaviour. Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-12block: deactivate blk_stat timer in wbt_disable_default()Ming Lei1-1/+3
rwb_enabled() can't be changed when there is any inflight IO. wbt_disable_default() may set rwb->wb_normal as zero, however the blk_stat timer may still be pending, and the timer function will update wrb->wb_normal again. This patch introduces blk_stat_deactivate() and applies it in wbt_disable_default(), then the following IO hang triggered when running parted & switching io scheduler can be fixed: [ 369.937806] INFO: task parted:3645 blocked for more than 120 seconds. [ 369.938941] Not tainted 4.20.0-rc6-00284-g906c801e5248 #498 [ 369.939797] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 369.940768] parted D 0 3645 3239 0x00000000 [ 369.941500] Call Trace: [ 369.941874] ? __schedule+0x6d9/0x74c [ 369.942392] ? wbt_done+0x5e/0x5e [ 369.942864] ? wbt_cleanup_cb+0x16/0x16 [ 369.943404] ? wbt_done+0x5e/0x5e [ 369.943874] schedule+0x67/0x78 [ 369.944298] io_schedule+0x12/0x33 [ 369.944771] rq_qos_wait+0xb5/0x119 [ 369.945193] ? karma_partition+0x1c2/0x1c2 [ 369.945691] ? wbt_cleanup_cb+0x16/0x16 [ 369.946151] wbt_wait+0x85/0xb6 [ 369.946540] __rq_qos_throttle+0x23/0x2f [ 369.947014] blk_mq_make_request+0xe6/0x40a [ 369.947518] generic_make_request+0x192/0x2fe [ 369.948042] ? submit_bio+0x103/0x11f [ 369.948486] ? __radix_tree_lookup+0x35/0xb5 [ 369.949011] submit_bio+0x103/0x11f [ 369.949436] ? blkg_lookup_slowpath+0x25/0x44 [ 369.949962] submit_bio_wait+0x53/0x7f [ 369.950469] blkdev_issue_flush+0x8a/0xae [ 369.951032] blkdev_fsync+0x2f/0x3a [ 369.951502] do_fsync+0x2e/0x47 [ 369.951887] __x64_sys_fsync+0x10/0x13 [ 369.952374] do_syscall_64+0x89/0x149 [ 369.952819] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 369.953492] RIP: 0033:0x7f95a1e729d4 [ 369.953996] Code: Bad RIP value. [ 369.954456] RSP: 002b:00007ffdb570dd48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a [ 369.955506] RAX: ffffffffffffffda RBX: 000055c2139c6be0 RCX: 00007f95a1e729d4 [ 369.956389] RDX: 0000000000000001 RSI: 0000000000001261 RDI: 0000000000000004 [ 369.957325] RBP: 0000000000000002 R08: 0000000000000000 R09: 000055c2139c6ce0 [ 369.958199] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c2139c0380 [ 369.959143] R13: 0000000000000004 R14: 0000000000000100 R15: 0000000000000008 Cc: stable@vger.kernel.org Cc: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-08block: convert wbt_wait() to use rq_qos_wait()Josef Bacik1-54/+11
Now that we have rq_qos_wait() in place, convert wbt_wait() over to using it with it's specific callbacks. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-16block: add queue_is_mq() helperJens Axboe1-1/+1
Various spots check for q->mq_ops being non-NULL, but provide a helper to do this instead. Where the ->mq_ops != NULL check is redundant, remove it. Since mq == rq-based now that legacy is gone, get rid of the queue_is_rq_based() and just use queue_is_mq() everywhere. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: add wbt_disable_default export for BFQJens Axboe1-0/+1
This isn't unused, if BFQ is modular we get into trouble. Fixes: b6676f653f13 ("block: remove a few unused exports") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: remove a few unused exportsChristoph Hellwig1-2/+0
Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: remove the unused lock argument to rq_qos_throttleChristoph Hellwig1-12/+4
Unused now that the legacy request path is gone. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07blk-wbt: kill check for legacy queue typeJens Axboe1-2/+1
Everything is blk-mq at this point, so it doesn't make any sense to have this option available as it does nothing. Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-11blk-wbt: wake up all when we scale up, not downJosef Bacik1-1/+1
Tetsuo brought to my attention that I screwed up the scale_up/scale_down helpers when I factored out the rq-qos code. We need to wake up all the waiters when we add slots for requests to make, not when we shrink the slots. Otherwise we'll end up things waiting forever. This was a mistake and simply puts everything back the way it was. cc: stable@vger.kernel.org Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") eported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-27blk-wbt: remove dead codeJens Axboe1-5/+0
We already note and mark discard and swap IO from bio_to_wbt_flags(). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-27blk-wbt: improve waking of tasksJens Axboe1-7/+56
We have two potential issues: 1) After commit 2887e41b910b, we only wake one process at the time when we finish an IO. We really want to wake up as many tasks as can queue IO. Before this commit, we woke up everyone, which could cause a thundering herd issue. 2) A task can potentially consume two wakeups, causing us to (in practice) miss a wakeup. Fix both by providing our own wakeup function, which stops __wake_up_common() from waking up more tasks if we fail to get a queueing token. With the strict ordering we have on the wait list, this wakes the right tasks and the right amount of tasks. Based on a patch from Jianchao Wang <jianchao.w.wang@oracle.com>. Tested-by: Agarwal, Anchal <anchalag@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-27blk-wbt: abstract out end IO completion handlerJens Axboe1-7/+14
Prep patch for calling the handler from a different context, no functional changes in this patch. Tested-by: Agarwal, Anchal <anchalag@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-23blk-wbt: don't maintain inflight counts if disabledJens Axboe1-0/+3
A previous commit removed the ability to have per-rq flags. We used those flags to maintain inflight counts. Since we don't have those anymore, we have to always maintain inflight counts, even if wbt is disabled. This is clearly suboptimal. Add a queue quiesce around changing the wbt latency settings from sysfs to work around this. With that, we can reliably put the enabled check in our bio_to_wbt_flags(), since we know the WBT_TRACKED flag will be consistent for the lifetime of the request. Fixes: c1c80384c8f ("block: remove external dependency on wbt_flags") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-23blk-wbt: fix has-sleeper queueing checkJens Axboe1-3/+5
We need to do this inside the loop as well, or we can allow new IO to supersede previous IO. Tested-by: Anchal Agarwal <anchalag@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-23blk-wbt: use wq_has_sleeper() for wq active checkJens Axboe1-4/+4
We need the memory barrier before checking the list head, use the appropriate helper for this. The matching queue side memory barrier is provided by set_current_state(). Tested-by: Anchal Agarwal <anchalag@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-23blk-wbt: move disable check into get_limit()Jens Axboe1-15/+7
Check it in one place, instead of in multiple places. Tested-by: Anchal Agarwal <anchalag@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-14blk-wbt: fix IO hang in wbt_wait()Ming Lei1-5/+1
On wbt invariant is that if one IO is tracked via WBT_TRACKED, rqw->inflight should be updated for tracking this IO. But commit c1c80384c8f ("block: remove external dependency on wbt_flags") forgets to remove the early handling of !rwb_enabled(rwb) inside wbt_wait(), then the inflight counter may not be increased in wbt_wait(), but decreased in wbt_done() for this kind of IO, so this counter may become negative, then wbt_wait() may wait forever. This patch fixes the report in the following link: https://marc.info/?l=linux-block&m=153221542021033&w=2 Fixes: c1c80384c8f ("block: remove external dependency on wbt_flags") Cc: Josef Bacik <jbacik@fb.com> Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-07blk-wbt: Avoid lock contention and thundering herd issue in wbt_waitAnchal Agarwal1-31/+24
I am currently running a large bare metal instance (i3.metal) on EC2 with 72 cores, 512GB of RAM and NVME drives, with a 4.18 kernel. I have a workload that simulates a database workload and I am running into lockup issues when writeback throttling is enabled,with the hung task detector also kicking in. Crash dumps show that most CPUs (up to 50 of them) are all trying to get the wbt wait queue lock while trying to add themselves to it in __wbt_wait (see stack traces below). [ 0.948118] CPU: 45 PID: 0 Comm: swapper/45 Not tainted 4.14.51-62.38.amzn1.x86_64 #1 [ 0.948119] Hardware name: Amazon EC2 i3.metal/Not Specified, BIOS 1.0 10/16/2017 [ 0.948120] task: ffff883f7878c000 task.stack: ffffc9000c69c000 [ 0.948124] RIP: 0010:native_queued_spin_lock_slowpath+0xf8/0x1a0 [ 0.948125] RSP: 0018:ffff883f7fcc3dc8 EFLAGS: 00000046 [ 0.948126] RAX: 0000000000000000 RBX: ffff887f7709ca68 RCX: ffff883f7fce2a00 [ 0.948128] RDX: 000000000000001c RSI: 0000000000740001 RDI: ffff887f7709ca68 [ 0.948129] RBP: 0000000000000002 R08: 0000000000b80000 R09: 0000000000000000 [ 0.948130] R10: ffff883f7fcc3d78 R11: 000000000de27121 R12: 0000000000000002 [ 0.948131] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 [ 0.948132] FS: 0000000000000000(0000) GS:ffff883f7fcc0000(0000) knlGS:0000000000000000 [ 0.948134] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.948135] CR2: 000000c424c77000 CR3: 0000000002010005 CR4: 00000000003606e0 [ 0.948136] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 0.948137] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 0.948138] Call Trace: [ 0.948139] <IRQ> [ 0.948142] do_raw_spin_lock+0xad/0xc0 [ 0.948145] _raw_spin_lock_irqsave+0x44/0x4b [ 0.948149] ? __wake_up_common_lock+0x53/0x90 [ 0.948150] __wake_up_common_lock+0x53/0x90 [ 0.948155] wbt_done+0x7b/0xa0 [ 0.948158] blk_mq_free_request+0xb7/0x110 [ 0.948161] __blk_mq_complete_request+0xcb/0x140 [ 0.948166] nvme_process_cq+0xce/0x1a0 [nvme] [ 0.948169] nvme_irq+0x23/0x50 [nvme] [ 0.948173] __handle_irq_event_percpu+0x46/0x300 [ 0.948176] handle_irq_event_percpu+0x20/0x50 [ 0.948179] handle_irq_event+0x34/0x60 [ 0.948181] handle_edge_irq+0x77/0x190 [ 0.948185] handle_irq+0xaf/0x120 [ 0.948188] do_IRQ+0x53/0x110 [ 0.948191] common_interrupt+0x87/0x87 [ 0.948192] </IRQ> .... [ 0.311136] CPU: 4 PID: 9737 Comm: run_linux_amd64 Not tainted 4.14.51-62.38.amzn1.x86_64 #1 [ 0.311137] Hardware name: Amazon EC2 i3.metal/Not Specified, BIOS 1.0 10/16/2017 [ 0.311138] task: ffff883f6e6a8000 task.stack: ffffc9000f1ec000 [ 0.311141] RIP: 0010:native_queued_spin_lock_slowpath+0xf5/0x1a0 [ 0.311142] RSP: 0018:ffffc9000f1efa28 EFLAGS: 00000046 [ 0.311144] RAX: 0000000000000000 RBX: ffff887f7709ca68 RCX: ffff883f7f722a00 [ 0.311145] RDX: 0000000000000035 RSI: 0000000000d80001 RDI: ffff887f7709ca68 [ 0.311146] RBP: 0000000000000202 R08: 0000000000140000 R09: 0000000000000000 [ 0.311147] R10: ffffc9000f1ef9d8 R11: 000000001a249fa0 R12: ffff887f7709ca68 [ 0.311148] R13: ffffc9000f1efad0 R14: 0000000000000000 R15: ffff887f7709ca00 [ 0.311149] FS: 000000c423f30090(0000) GS:ffff883f7f700000(0000) knlGS:0000000000000000 [ 0.311150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.311151] CR2: 00007feefcea4000 CR3: 0000007f7016e001 CR4: 00000000003606e0 [ 0.311152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 0.311153] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 0.311154] Call Trace: [ 0.311157] do_raw_spin_lock+0xad/0xc0 [ 0.311160] _raw_spin_lock_irqsave+0x44/0x4b [ 0.311162] ? prepare_to_wait_exclusive+0x28/0xb0 [ 0.311164] prepare_to_wait_exclusive+0x28/0xb0 [ 0.311167] wbt_wait+0x127/0x330 [ 0.311169] ? finish_wait+0x80/0x80 [ 0.311172] ? generic_make_request+0xda/0x3b0 [ 0.311174] blk_mq_make_request+0xd6/0x7b0 [ 0.311176] ? blk_queue_enter+0x24/0x260 [ 0.311178] ? generic_make_request+0xda/0x3b0 [ 0.311181] generic_make_request+0x10c/0x3b0 [ 0.311183] ? submit_bio+0x5c/0x110 [ 0.311185] submit_bio+0x5c/0x110 [ 0.311197] ? __ext4_journal_stop+0x36/0xa0 [ext4] [ 0.311210] ext4_io_submit+0x48/0x60 [ext4] [ 0.311222] ext4_writepages+0x810/0x11f0 [ext4] [ 0.311229] ? do_writepages+0x3c/0xd0 [ 0.311239] ? ext4_mark_inode_dirty+0x260/0x260 [ext4] [ 0.311240] do_writepages+0x3c/0xd0 [ 0.311243] ? _raw_spin_unlock+0x24/0x30 [ 0.311245] ? wbc_attach_and_unlock_inode+0x165/0x280 [ 0.311248] ? __filemap_fdatawrite_range+0xa3/0xe0 [ 0.311250] __filemap_fdatawrite_range+0xa3/0xe0 [ 0.311253] file_write_and_wait_range+0x34/0x90 [ 0.311264] ext4_sync_file+0x151/0x500 [ext4] [ 0.311267] do_fsync+0x38/0x60 [ 0.311270] SyS_fsync+0xc/0x10 [ 0.311272] do_syscall_64+0x6f/0x170 [ 0.311274] entry_SYSCALL_64_after_hwframe+0x42/0xb7 In the original patch, wbt_done is waking up all the exclusive processes in the wait queue, which can cause a thundering herd if there is a large number of writer threads in the queue. The original intention of the code seems to be to wake up one thread only however, it uses wake_up_all() in __wbt_done(), and then uses the following check in __wbt_wait to have only one thread actually get out of the wait loop: if (waitqueue_active(&rqw->wait) && rqw->wait.head.next != &wait->entry) return false; The problem with this is that the wait entry in wbt_wait is define with DEFINE_WAIT, which uses the autoremove wakeup function. That means that the above check is invalid - the wait entry will have been removed from the queue already by the time we hit the check in the loop. Secondly, auto-removing the wait entries also means that the wait queue essentially gets reordered "randomly" (e.g. threads re-add themselves in the order they got to run after being woken up). Additionally, new requests entering wbt_wait might overtake requests that were queued earlier, because the wait queue will be (temporarily) empty after the wake_up_all, so the waitqueue_active check will not stop them. This can cause certain threads to starve under high load. The fix is to leave the woken up requests in the queue and remove them in finish_wait() once the current thread breaks out of the wait loop in __wbt_wait. This will ensure new requests always end up at the back of the queue, and they won't overtake requests that are already in the wait queue. With that change, the loop in wbt_wait is also in line with many other wait loops in the kernel. Waking up just one thread drastically reduces lock contention, as does moving the wait queue add/remove out of the loop. A significant drop in lockdep's lock contention numbers is seen when running the test application on the patched kernel. Signed-off-by: Anchal Agarwal <anchalag@amazon.com> Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09block: remove external dependency on wbt_flagsJosef Bacik1-13/+39
We don't really need to save this stuff in the core block code, we can just pass the bio back into the helpers later on to derive the same flags and update the rq->wbt_flags appropriately. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09blk-rq-qos: refactor out common elements of blk-wbtJosef Bacik1-182/+144
blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09block: get rid of struct blk_issue_statOmar Sandoval1-7/+5
struct blk_issue_stat squashes three things into one u64: - The time the driver started working on a request - The original size of the request (for the io.low controller) - Flags for writeback throttling It turns out that on x86_64, we have a 4 byte hole in struct request which we can fill with the non-timestamp fields from blk_issue_stat, simplifying things quite a bit. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09block: pass struct request instead of struct blk_issue_stat to wbtOmar Sandoval1-27/+26
issue_stat is going to go away, so first make writeback throttling take the containing request, update the internal wbt helpers accordingly, and change rwb->sync_cookie to be the request pointer instead of the issue_stat pointer. No functional change. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09block: move some wbt helpers to blk-wbt.cOmar Sandoval1-0/+20
A few helpers are only used from blk-wbt.c, so move them there, and put wbt_track() behind the CONFIG_BLK_WBT typedef. This is in preparation for changing how the wbt flags are tracked. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09blk-wbt: throttle discards like background writesJens Axboe1-17/+26
Throttle discards like we would any background write. Discards should be background activity, so if they are impacting foreground IO, then we will throttle them down. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09blk-wbt: pass in enum wbt_flags to get_rq_wait()Jens Axboe1-10/+15
This is in preparation for having more write queues, in which case we would have needed to pass in more information than just a simple 'is_kswapd' boolean. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09blk-wbt: account any writing command as a writeJens Axboe1-1/+1
We currently special case WRITE and FLUSH, but we should really just include any command with the write bit set. This ensures that we account DISCARD. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07blk-wbt: account flush requests correctlyJens Axboe1-1/+9
Mikulas reported a workload that saw bad performance, and figured out what it was due to various other types of requests being accounted as reads. Flush requests, for instance. Due to the high latency of those, we heavily throttle the writes to keep the latencies in balance. But they really should be accounted as writes. Fix this by checking the exact type of the request. If it's a read, account as a read, if it's a write or a flush, account as a write. Any other request we disregard. Previously everything would have been mistakenly accounted as reads. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-24blk-wbt: fix comments typoweiping zhang1-1/+1
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-24blk-wbt: move wbt_clear_stat to common place in wbt_doneweiping zhang1-2/+1
wbt_done call wbt_clear_stat no matter current stat was tracked or not, move it to common place. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-24blk-wbt: remove duplicated setting in wbt_initweiping zhang1-2/+0
rwb->wc and rwb->queue_depth were overwritten by wbt_set_write_cache and wbt_set_queue_depth, remove the default setting. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-15Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland1-1/+1
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-09block,bfq: Disable writeback throttlingLuca Miccio1-1/+1
Similarly to CFQ, BFQ has its write-throttling heuristics, and it is better not to combine them with further write-throttling heuristics of a different nature. So this commit disables write-back throttling for a device if BFQ is used as I/O scheduler for that device. Signed-off-by: Luca Miccio <lucmiccio@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-20sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list namingIngo Molnar1-1/+1
So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 18:53:01 +0300