| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
htmdump_init calls is_kvm_guest() to check for guest environment.
is_kvm_guest() is defined in kvm_guest.h header file. Without including
the header file, build hits error failing to find the function.
arch/powerpc/platforms/pseries/htmdump.c: In function 'htmdump_init':
arch/powerpc/platforms/pseries/htmdump.c:469:6: error: implicit declaration of function 'is_kvm_guest';
did you mean '__key_get'? [-Werror=implicit-function-declaration]
if (is_kvm_guest()) {
^~~~~~~~~~~~
__key_get
This is observed in configs where CONFIG_KVM_GUEST is disabled.
Include header file explicitly to avoid the build error
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505061324.elUl4njU-lkp@intel.com/
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250506135232.69014-1-atrajeev@linux.ibm.com
|
|
The commit 9576730d0e6e ("KVM: PPC: select IRQ_BYPASS_MANAGER") enabled
IRQ_BYPASS_MANAGER when CONFIG_KVM was set. Subsequently, commit
c57875f5f9be ("KVM: PPC: Book3S HV: Enable IRQ bypass") enabled IRQ
bypass and added the necessary callbacks to create/remove the mappings
between host real IRQ and the guest GSI.
The availability of IRQ bypass is determined by the arch-specific
function kvm_arch_has_irq_bypass(), which invokes
kvmppc_irq_bypass_add_producer_hv(). This function, in turn, calls
kvmppc_set_passthru_irq_hv() to create a mapping in the passthrough IRQ
map, associating a host IRQ to a guest GSI.
However, when a pSeries KVM guest (L2) is booted within an LPAR (L1)
with the kernel boot parameter `xive=off`, it defaults to using emulated
XICS controller. As an attempt to establish host IRQ to guest GSI
mappings via kvmppc_set_passthru_irq() on a PCI device hotplug
(passhthrough) operation fail, returning -ENOENT. This failure occurs
because only interrupts with EOI operations handled through OPAL calls
(verified via is_pnv_opal_msi()) are currently supported.
These mapping failures lead to below repeated warnings in the L1 host:
[ 509.220349] kvmppc_set_passthru_irq_hv: Could not assign IRQ map for (58,4970)
[ 509.220368] kvmppc_set_passthru_irq (irq 58, gsi 4970) fails: -2
[ 509.220376] vfio-pci 0015:01:00.0: irq bypass producer (token 0000000090bc635b) registration fails: -2
...
[ 509.291781] vfio-pci 0015:01:00.0: irq bypass producer (token 000000003822eed8) registration fails: -2
Fix this by restricting IRQ bypass enablement on pSeries systems by
making the IRQ bypass callbacks unavailable when running on pSeries
platform.
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250425185641.1611857-1-amachhiw@linux.ibm.com
|
|
8xx has three large page sizes: 8M, 512k and 16k.
A too big alignment can lead to wasting memory. On a board which has
only 32 MBytes of RAM, every single byte is worth it and a 512k
alignment is sometimes too much.
Allow mapping kernel memory with 16k pages and reduce the constraint
on kernel memory alignment. 512k and 16k pages are handled the same
way so reverse tests in order to make 8M pages the special case and
other ones (512k and 16k) the alternative.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/fa9927b70df13627cdf10b992ea71d6562c7760e.1746191262.git.christophe.leroy@csgroup.eu
|
|
free_page_and_swap_cache() takes a struct page pointer as input parameter,
but it will immediately convert it to folio and all operations following
within use folio instead of page. It makes more sense to pass in folio
directly.
Convert free_page_and_swap_cache() to free_folio_and_swap_cache() to
consume folio directly.
Link: https://lkml.kernel.org/r/20250416201720.41678-1-nifan.cxl@gmail.com
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Constructors for PUD/P4D-level pgtables were recently introduced. They
should be called for all pgtables; make sure they are called for special
kernel mappings created by create_pgd_mapping() too.
While at it also switch to using pagetable_alloc() like in
alloc_{pte,pmd}_late().
Link: https://lkml.kernel.org/r/20250408095222.860601-13-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Constructors for PUD/P4D-level pgtables were recently introduced. They
should be called for all pgtables; make sure they are called for special
kernel mappings created by __create_pgd_mapping() too.
Link: https://lkml.kernel.org/r/20250408095222.860601-12-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
pagetable_{pte,pmd}_ctor(mm, ptdesc) skip the ptlock initialisation if mm
is &init_mm. To avoid unnecessary overhead, it is therefore preferable to
pass the actual mm associated to the PTE/PMD.
Unfortunately, this proves challenging for alloc_{pte,pmd}_late() as the
associated mm is not available at the point where they are called - in
fact not even top-level functions like create_pgd_mapping() are passed the
mm. As a result they both call the ctor with NULL as mm; this is safe but
potentially wasteful.
This is not a new situation, but let's add a couple of comments to clarify
it.
Link: https://lkml.kernel.org/r/20250408095222.860601-11-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
TL;DR: always call the PTE/PMD ctor, passing the appropriate mm to skip
ptlock_init() if unneeded.
__create_pgd_mapping() is used for creating different kinds of mappings,
and may allocate page table pages if passed an allocator callback. There
are currently three such cases:
1. create_pgd_mapping(), which is used to create the EFI mapping
2. arch_add_memory()
3. map_entry_trampoline()
1. uses pgd_pgtable_alloc() as allocator callback, which calls the
PTE/PMD ctor, while 2. and 3. use __pgd_pgtable_alloc(), which does not.
The rationale is most likely that pgtables associated with init_mm do not
make use of split page table locks, and it is therefore unnecessary to
initialise them by calling the ctor. 2. operates on swapper_pg_dir so
the allocated pgtables are clearly associated with init_mm, this is
arguably the case for 3. too (the trampoline mapping is never modified so
ptlocks are anyway irrelevant). 1. corresponds to efi_mm so ptlocks need
to be initialised in that case.
We are now moving towards calling the ctor for all page tables, even those
associated with init_mm. pagetable_{pte,pmd}_ctor() have become aware of
the associated mm so that the ptlock initialisation can be skipped for
init_mm. This patch therefore amends the allocator callbacks so that the
PTE/PMD ctor are always called, with an appropriate mm pointer to avoid
unnecessary ptlock overhead.
Modifying the prototype of the allocator callbacks to take the mm and
propagating that pointer all the way down would be pretty invasive.
Instead:
* __pgd_pgtable_alloc() (cases 2. and 3. above) is replaced with
pgd_pgtable_alloc_init_mm(), resulting in the ctors being called with
&init_mm. This is the main functional change in this patch; the ptlock
still isn't initialised, but other ctor actions (e.g.
accounting-related) are now carried out for those allocated pgtables.
* pgd_pgtable_alloc() (case 1. above) is replaced with
pgd_pgtable_alloc_special_mm(), resulting in the ctors being called with
NULL as mm. No functional change here; NULL essentially means "not
init_mm", and the ptlock is still initialised.
__pgd_pgtable_alloc() is now the common implementation of those two
helpers. While at it we switch it to using pagetable_alloc() like
standard pgtable allocator functions and remove the comment regarding ctor
calls (ctors are now always expected to be called).
Link: https://lkml.kernel.org/r/20250408095222.860601-10-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 90292aca9854 ("arm64: mm: use appropriate ctors for page tables")
introduced pgtable ctor calls in pgd_pgtable_alloc(). To identify the
pgtable level and call the appropriate ctor, the *_SHIFT value associated
with the pgtable level is used. However, those values do not
unambiguously identify a level, because if a given level is folded, the
*_SHIFT value will be equal to that of the upper level (e.g. PMD_SHIFT ==
PUD_SHIFT if PMD is folded).
As things stand, there is probably not much damaged done by calling the
ctor for a different level, and ARCH_ENABLE_SPLIT_PMD_PTLOCK is only
selected if PMD isn't folded (so we don't needlessly initialise
pmd_ptlock). Still, this is pretty confusing, and it would get even more
confusing when adding ctor calls for the remaining levels.
Let's simplify all this by using an enum to identify the pgtable level
instead; this way folding becomes irrelevant. This is inspired by one of
the m68k pgtable allocators (arch/m68k/include/asm/motorola_pgalloc.h).
Link: https://lkml.kernel.org/r/20250408095222.860601-9-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The generic implementation of pte_{alloc_one,free}_kernel now calls the
[cd]tor, without initialising the ptlock needlessly as
pagetable_pte_ctor() skips it for init_mm.
Align sparc64 with the generic implementation by ensuring
pagetable_pte_[cd]tor() are called for kernel PTEs. As a result the
kernel and user alloc/free functions have the same implementation, and
since pgtable_t is defined as pte_t *, we can have both call a common
helper.
Link: https://lkml.kernel.org/r/20250408095222.860601-7-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The generic implementation of pte_{alloc_one,free}_kernel now calls the
[cd]tor, without initialising the ptlock needlessly as
pagetable_pte_ctor() skips it for init_mm.
On powerpc, all functions related to PTE allocation are implemented by
common helpers, which are passed a boolean to differentiate user from
kernel pgtables. This patch aligns the powerpc implementation with the
generic one by calling pagetable_pte_[cd]tor() unconditionally in those
helpers.
Link: https://lkml.kernel.org/r/20250408095222.860601-6-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The generic implementation of pte_{alloc_one,free}_kernel now calls the
[cd]tor. Align the m68k/ColdFire implementation of those functions by
calling the [cd]tor explicitly.
Link: https://lkml.kernel.org/r/20250408095222.860601-5-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since [1], constructors/destructors are expected to be called for all page
table pages, at all levels and for both user and kernel pgtables. There
is however one glaring exception: kernel PTEs are managed via separate
helpers (pte_alloc_kernel/pte_free_kernel), which do not call the [cd]tor,
at least not in the generic implementation.
The most obvious reason for this anomaly is that init_mm is special-cased
not to use split page table locks. As a result calling ptlock_init() for
PTEs associated with init_mm would be wasteful, potentially resulting in
dynamic memory allocation. However, pgtable [cd]tors perform other
actions - currently related to accounting/statistics, and potentially more
functionally significant in the future.
Now that pagetable_pte_ctor() is passed the associated mm, we can make it
skip the call to ptlock_init() for init_mm; this allows us to call the
ctor from pte_alloc_one_kernel() too. This is matched by a call to the
pgtable destructor in pte_free_kernel(); no special-casing is needed on
that path, as ptlock_free() is already called unconditionally.
(ptlock_free() is a no-op unless a ptlock was allocated for the given
PTP.)
This patch ensures that all architectures that rely on
<asm-generic/pgalloc.h> call the [cd]tor for kernel PTEs.
pte_free_kernel() cannot be overridden so changing the generic
implementation is sufficient. pte_alloc_one_kernel() can be overridden
using __HAVE_ARCH_PTE_ALLOC_ONE_KERNEL, and a few architectures implement
it by calling the page allocator directly. We amend those so that they
call the generic __pte_alloc_one_kernel() instead, if possible, ensuring
that the ctor is called.
A few architectures do not use <asm-generic/pgalloc.h>; those will be
taken care of separately.
[1] https://lore.kernel.org/linux-mm/20250103184415.2744423-1-kevin.brodsky@arm.com/
Link: https://lkml.kernel.org/r/20250408095222.860601-4-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Page table pages are normally freed using the appropriate helper for the
given page table level. On x86, pud_free_pmd_page() and
pmd_free_pte_page() are an exception to the rule: they call free_page()
directly.
Constructor/destructor calls are about to be introduced for kernel PTEs.
To avoid missing dtor calls in those helpers, free the PTE pages using
pte_free_kernel() instead of free_page().
While at it also use pmd_free() instead of calling pagetable_dtor()
explicitly at the PMD level.
Link: https://lkml.kernel.org/r/20250408095222.860601-3-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Always call constructor for kernel page tables", v2.
There has been much confusion around exactly when page table
constructors/destructors (pagetable_*_[cd]tor) are supposed to be called.
They were initially introduced for user PTEs only (to support split page
table locks), then at the PMD level for the same purpose. Accounting was
added later on, starting at the PTE level and then moving to higher levels
(PMD, PUD). Finally, with my earlier series "Account page tables at all
levels" [1], the ctor/dtor is run for all levels, all the way to PGD.
I thought this was the end of the story, and it hopefully is for user
pgtables, but I was wrong for what concerns kernel pgtables. The current
situation there makes very little sense:
* At the PTE level, the ctor/dtor is not called (at least in the generic
implementation). Specific helpers are used for kernel pgtables at this
level (pte_{alloc,free}_kernel()) and those have never called the
ctor/dtor, most likely because they were initially irrelevant in the
kernel case.
* At all other levels, the ctor/dtor is normally called. This is
potentially wasteful at the PMD level (more on that later).
This series aims to ensure that the ctor/dtor is always called for kernel
pgtables, as it already is for user pgtables. Besides consistency, the
main motivation is to guarantee that ctor/dtor hooks are systematically
called; this makes it possible to insert hooks to protect page tables [2],
for instance. There is however an extra challenge: split locks are not
used for kernel pgtables, and it would therefore be wasteful to initialise
them (ptlock_init()).
It is worth clarifying exactly when split locks are used. They clearly
are for user pgtables, but as illustrated in commit 61444cde9170 ("ARM:
8591/1: mm: use fully constructed struct pages for EFI pgd allocations"),
they also are for special page tables like efi_mm. The one case where
split locks are definitely unused is pgtables owned by init_mm; this is
consistent with the behaviour of apply_to_pte_range().
The approach chosen in this series is therefore to pass the mm associated
to the pgtables being constructed to pagetable_{pte,pmd}_ctor() (patch 1),
and skip ptlock_init() if mm == &init_mm (patch 3 and 7). This makes it
possible to call the PTE ctor/dtor from pte_{alloc,free}_kernel() without
unintended consequences (patch 3). As a result the accounting functions
are now called at all levels for kernel pgtables, and split locks are
never initialised.
In configurations where ptlocks are dynamically allocated (32-bit,
PREEMPT_RT, etc.) and ARCH_ENABLE_SPLIT_PMD_PTLOCK is selected, this
series results in the removal of a kmem_cache allocation for every kernel
PMD. Additionally, for certain architectures that do not use
<asm-generic/pgalloc.h> such as s390, the same optimisation occurs at the
PTE level.
===
Things get more complicated when it comes to special pgtable allocators
(patch 8-12). All architectures need such allocators to create initial
kernel pgtables; we are not concerned with those as the ctor cannot be
called so early in the boot sequence. However, those allocators may also
be used later in the boot sequence or during normal operations. There are
two main use-cases:
1. Mapping EFI memory: efi_mm (arm, arm64, riscv)
2. arch_add_memory(): init_mm
The ctor is already explicitly run (at the PTE/PMD level) in the first
case, as required for pgtables that are not associated with init_mm.
However the same allocators may also be used for the second use-case (or
others), and this is where it gets messy. Patch 1 calls the ctor with
NULL as mm in those situations, as the actual mm isn't available.
Practically this means that ptlocks will be unconditionally initialised.
This is fine on arm - create_mapping_late() is only used for the EFI
mapping. On arm64, __create_pgd_mapping() is also used by
arch_add_memory(); patch 8/9/11 ensure that ctors are called at all levels
with the appropriate mm. The situation is similar on riscv, but
propagating the mm down to the ctor would require significant refactoring.
Since they are already called unconditionally, this series leaves riscv
no worse off - patch 10 adds comments to clarify the situation.
From a cursory look at other architectures implementing arch_add_memory(),
s390 and x86 may also need a similar treatment to add constructor calls.
This is to be taken care of in a future version or as a follow-up.
===
The complications in those special pgtable allocators beg the question:
does it really make sense to treat efi_mm and init_mm differently in e.g.
apply_to_pte_range()? Maybe what we really need is a way to tell if an mm
corresponds to user memory or not, and never use split locks for non-user
mm's. Feedback and suggestions welcome!
This patch (of 12):
In preparation for calling constructors for all kernel page tables while
eliding unnecessary ptlock initialisation, let's pass down the associated
mm to the PTE/PMD level ctors. (These are the two levels where ptlocks
are used.)
In most cases the mm is already around at the point of calling the ctor so
we simply pass it down. This is however not the case for special page
table allocators:
* arch/arm/mm/mmu.c
* arch/arm64/mm/mmu.c
* arch/riscv/mm/init.c
In those cases, the page tables being allocated are either for standard
kernel memory (init_mm) or special page directories, which may not be
associated to any mm. For now let's pass NULL as mm; this will be refined
where possible in future patches.
No functional change in this patch.
Link: https://lore.kernel.org/linux-mm/20250103184415.2744423-1-kevin.brodsky@arm.com/ [1]
Link: https://lore.kernel.org/linux-hardening/20250203101839.1223008-1-kevin.brodsky@arm.com/ [2]
Link: https://lkml.kernel.org/r/20250408095222.860601-1-kevin.brodsky@arm.com
Link: https://lkml.kernel.org/r/20250408095222.860601-2-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: <x86@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Define ptdesc_t type which describes the basic page table descriptor
layout on arm64 platform. Subsequently all level specific pxxval_t
descriptors are derived from ptdesc_t thus establishing a common original
format, which can also be appropriate for page table entries, masks and
protection values etc which are used at all page table levels.
Link: https://lkml.kernel.org/r/20250407053113.746295-4-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Suggested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Last argument in effective_prot() is u64 assuming pxd_val() returned value
(all page table levels) is 64 bit. pxd_val() is very platform specific
and its type should not be assumed in generic MM.
Split effective_prot() into individual page table level specific callbacks
which accepts corresponding pxd_t argument instead and then the
subscribing platform (only x86) just derive pxd_val() from the entries as
required and proceed as earlier.
Link: https://lkml.kernel.org/r/20250407053113.746295-3-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/ptdump: Drop assumption that pxd_val() is u64", v2.
Last argument passed down in note_page() is u64 assuming pxd_val()
returned value (all page table levels) is 64 bit - which might not be the
case going ahead when D128 page tables is enabled on arm64 platform.
Besides pxd_val() is very platform specific and its type should not be
assumed in generic MM. A similar problem exists for effective_prot(),
although it is restricted to x86 platform.
This series splits note_page() and effective_prot() into individual page
table level specific callbacks which accepts corresponding pxd_t page
table entry as an argument instead and later on all subscribing platforms
could derive pxd_val() from the table entries as required and proceed as
before.
Define ptdesc_t type which describes the basic page table descriptor
layout on arm64 platform. Subsequently all level specific pxxval_t
descriptors are derived from ptdesc_t thus establishing a common original
format, which can also be appropriate for page table entries, masks and
protection values etc which are used at all page table levels.
This patch (of 3):
Last argument passed down in note_page() is u64 assuming pxd_val()
returned value (all page table levels) is 64 bit - which might not be the
case going ahead when D128 page tables is enabled on arm64 platform.
Besides pxd_val() is very platform specific and its type should not be
assumed in generic MM.
Split note_page() into individual page table level specific callbacks
which accepts corresponding pxd_t argument instead and then subscribing
platforms just derive pxd_val() from the entries as required and proceed
as earlier.
Also add a note_page_flush() callback for flushing the last page table
page that was being handled earlier via level = -1.
Link: https://lkml.kernel.org/r/20250407053113.746295-1-anshuman.khandual@arm.com
Link: https://lkml.kernel.org/r/20250407053113.746295-2-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
uprobe_write_opcode()
We already have the VMA, no need to look it up using
get_user_page_vma_remote(). We can now switch to get_user_pages_remote().
Link: https://lkml.kernel.org/r/20250321113713.204682-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Namhyung kim <namhyung@kernel.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: tongtiangen <tongtiangen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to syscall_set_arguments() that complements
syscall_get_arguments(), introduce syscall_set_nr() that complements
syscall_get_nr().
syscall_set_nr() is going to be needed along with syscall_set_arguments()
on all HAVE_ARCH_TRACEHOOK architectures to implement
PTRACE_SET_SYSCALL_INFO API.
Link: https://lkml.kernel.org/r/20250303112020.GD24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> # mips
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This function is going to be needed on all HAVE_ARCH_TRACEHOOK
architectures to implement PTRACE_SET_SYSCALL_INFO API.
This partially reverts commit 7962c2eddbfe ("arch: remove unused function
syscall_set_arguments()") by reusing some of old syscall_set_arguments()
implementations.
[nathan@kernel.org: fix compile time fortify checks]
Link: https://lkml.kernel.org/r/20250408213131.GA2872426@ax162
Link: https://lkml.kernel.org/r/20250303112009.GC24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> [mips]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "ptrace: introduce PTRACE_SET_SYSCALL_INFO API", v7.
PTRACE_SET_SYSCALL_INFO is a generic ptrace API that complements
PTRACE_GET_SYSCALL_INFO by letting the ptracer modify details of system
calls the tracee is blocked in.
This API allows ptracers to obtain and modify system call details in a
straightforward and architecture-agnostic way, providing a consistent way
of manipulating the system call number and arguments across architectures.
As in case of PTRACE_GET_SYSCALL_INFO, PTRACE_SET_SYSCALL_INFO also does
not aim to address numerous architecture-specific system call ABI
peculiarities, like differences in the number of system call arguments for
such system calls as pread64 and preadv.
The current implementation supports changing only those bits of system
call information that are used by strace system call tampering, namely,
syscall number, syscall arguments, and syscall return value.
Support of changing additional details returned by
PTRACE_GET_SYSCALL_INFO, such as instruction pointer and stack pointer,
could be added later if needed, by using struct ptrace_syscall_info.flags
to specify the additional details that should be set. Currently, "flags"
and "reserved" fields of struct ptrace_syscall_info must be initialized
with zeroes; "arch", "instruction_pointer", and "stack_pointer" fields are
currently ignored.
PTRACE_SET_SYSCALL_INFO currently supports only PTRACE_SYSCALL_INFO_ENTRY,
PTRACE_SYSCALL_INFO_EXIT, and PTRACE_SYSCALL_INFO_SECCOMP operations.
Other operations could be added later if needed.
Ideally, PTRACE_SET_SYSCALL_INFO should have been introduced along with
PTRACE_GET_SYSCALL_INFO, but it didn't happen. The last straw that
convinced me to implement PTRACE_SET_SYSCALL_INFO was apparent failure to
provide an API of changing the first system call argument on riscv
architecture [1].
ptrace(2) man page:
long ptrace(enum __ptrace_request request, pid_t pid, void *addr, void *data);
...
PTRACE_SET_SYSCALL_INFO
Modify information about the system call that caused the stop.
The "data" argument is a pointer to struct ptrace_syscall_info
that specifies the system call information to be set.
The "addr" argument should be set to sizeof(struct ptrace_syscall_info)).
This patch (of 6):
hexagon is the only architecture that provides HAVE_ARCH_TRACEHOOK but
doesn't define syscall_set_return_value(). Since this function is going
to be needed on all HAVE_ARCH_TRACEHOOK architectures to implement
PTRACE_SET_SYSCALL_INFO API, add it on hexagon, too.
Link: https://lore.kernel.org/all/59505464-c84a-403d-972f-d4b2055eeaac@gmail.com/ [1]
Link: https://lkml.kernel.org/r/20250303111953.GB24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Systems with hotplug may provide an advisement value on what the memblock
size should be. Probe this value when the rest of the configuration
values are considered.
The new heuristic is as follows
1) set_memory_block_size_order value if already set (cmdline param)
2) minimum block size if memory is less than large block limit
3) if no hotplug advice: Max block size if system is bare-metal,
otherwise use end of memory alignment.
4) if hotplug advice: lesser of advice and end of memory alignment.
Convert to cpu_feature_enabled() while at it.[1]
[1] https://lore.kernel.org/all/20241031103401.GBZyNdGQ-ZyXKyzC_z@fat_crate.local/
Link: https://lkml.kernel.org/r/20250127153405.3379117-3-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Suggested-by: Borislav Petkov <bp@alien8.de>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bruno Faccini <bfaccini@nvidia.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Robert Richter <rrichter@amd.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are now no callers of mk_huge_pmd() and mk_pmd(). Remove them.
Link: https://lkml.kernel.org/r/20250402181709.2386022-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move the pfn_pte() definitions from the 2level and 4level files to the
generic pgtable.h and delete the custom definition of mk_pte() so that we
use the central definition.
Link: https://lkml.kernel.org/r/20250402181709.2386022-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move the shadow stack check to pfn_pte() which lets us use the common
definition of mk_pte().
Link: https://lkml.kernel.org/r/20250402181709.2386022-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of defining pfn_pte() in terms of mk_pte(), make pfn_pte() the
base implementation. That lets us use the generic definition of mk_pte().
Link: https://lkml.kernel.org/r/20250402181709.2386022-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Most architectures simply call pfn_pte(). Centralise that as the normal
definition and remove the definition of mk_pte() from the architectures
which have either that exact definition or something similar.
Link: https://lkml.kernel.org/r/20250402181709.2386022-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Cc: Zi Yan <ziy@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Add folio_mk_pte()", v2.
Today if you have a folio and want to create a PTE that points to the
first page in it, you have to convert from a folio to a page. That's
zero-cost today but will be more expensive in the future.
I didn't want to add folio_mk_pte() to each architecture, and I didn't
want to lose any optimisations that architectures have from their own
implementation of mk_pte(). Fortunately, most architectures have by now
turned their mk_pte() into a fairly bland variant of pfn_pte(), but s390
has a special optimisation that needs to be moved into generic code in the
first patch.
At the end of this patch set, we have mk_pte() and folio_mk_pte() in mm.h
and each architecture only has to implement pfn_pte(). We've also
eliminated mk_huge_pte(), mk_huge_pmd() and mk_pmd().
This patch (of 11):
If the first access to a folio is a read that is then followed by a write,
we can save a page fault. s390 implemented this in their mk_pte() in
commit abf09bed3cce ("s390/mm: implement software dirty bits"), but other
architectures can also benefit from this.
Link: https://lkml.kernel.org/r/20250402181709.2386022-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20250402181709.2386022-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # for s390
Cc: Zi Yan <ziy@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 cBPF BHB mitigation from James Morse:
"This adds the BHB mitigation into the code JITted for cBPF programs as
these can be loaded by unprivileged users via features like seccomp.
The existing mechanisms to disable the BHB mitigation will also
prevent the mitigation being JITted. In addition, cBPF programs loaded
by processes with the SYS_ADMIN capability are not mitigated as these
could equally load an eBPF program that does the same thing.
For good measure, the list of 'k' values for CPU's local mitigations
is updated from the version on arm's website"
* tag 'arm64_cbpf_mitigation_2025_05_08' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: proton-pack: Add new CPUs 'k' values for branch mitigation
arm64: bpf: Only mitigate cBPF programs loaded by unprivileged users
arm64: bpf: Add BHB mitigation to the epilogue for cBPF programs
arm64: proton-pack: Expose whether the branchy loop k value
arm64: proton-pack: Expose whether the platform is mitigated by firmware
arm64: insn: Add support for encoding DSB
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 ITS mitigation from Dave Hansen:
"Mitigate Indirect Target Selection (ITS) issue.
I'd describe this one as a good old CPU bug where the behavior is
_obviously_ wrong, but since it just results in bad predictions it
wasn't wrong enough to notice. Well, the researchers noticed and also
realized that thus bug undermined a bunch of existing indirect branch
mitigations.
Thus the unusually wide impact on this one. Details:
ITS is a bug in some Intel CPUs that affects indirect branches
including RETs in the first half of a cacheline. Due to ITS such
branches may get wrongly predicted to a target of (direct or indirect)
branch that is located in the second half of a cacheline. Researchers
at VUSec found this behavior and reported to Intel.
Affected processors:
- Cascade Lake, Cooper Lake, Whiskey Lake V, Coffee Lake R, Comet
Lake, Ice Lake, Tiger Lake and Rocket Lake.
Scope of impact:
- Guest/host isolation:
When eIBRS is used for guest/host isolation, the indirect branches
in the VMM may still be predicted with targets corresponding to
direct branches in the guest.
- Intra-mode using cBPF:
cBPF can be used to poison the branch history to exploit ITS.
Realigning the indirect branches and RETs mitigates this attack
vector.
- User/kernel:
With eIBRS enabled user/kernel isolation is *not* impacted by ITS.
- Indirect Branch Prediction Barrier (IBPB):
Due to this bug indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB.
This will be fixed in the microcode.
Mitigation:
As indirect branches in the first half of cacheline are affected, the
mitigation is to replace those indirect branches with a call to thunk that
is aligned to the second half of the cacheline.
RETs that take prediction from RSB are not affected, but they may be
affected by RSB-underflow condition. So, RETs in the first half of
cacheline are also patched to a return thunk that executes the RET aligned
to second half of cacheline"
* tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest/x86/bugs: Add selftests for ITS
x86/its: FineIBT-paranoid vs ITS
x86/its: Use dynamic thunks for indirect branches
x86/ibt: Keep IBT disabled during alternative patching
mm/execmem: Unify early execmem_cache behaviour
x86/its: Align RETs in BHB clear sequence to avoid thunking
x86/its: Add support for RSB stuffing mitigation
x86/its: Add "vmexit" option to skip mitigation on some CPUs
x86/its: Enable Indirect Target Selection mitigation
x86/its: Add support for ITS-safe return thunk
x86/its: Add support for ITS-safe indirect thunk
x86/its: Enumerate Indirect Target Selection (ITS) bug
Documentation: x86/bugs/its: Add ITS documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 IBTI mitigation from Dave Hansen:
"Mitigate Intra-mode Branch History Injection via classic BFP programs
This adds the branch history clearing mitigation to cBPF programs for
x86. Intra-mode BHI attacks via cBPF a.k.a IBTI-History was reported
by researchers at VUSec.
For hardware that doesn't support BHI_DIS_S, the recommended
mitigation is to run the short software sequence followed by the IBHF
instruction after cBPF execution. On hardware that does support
BHI_DIS_S, enable BHI_DIS_S and execute the IBHF after cBPF execution.
The Indirect Branch History Fence (IBHF) is a new instruction that
prevents indirect branch target predictions after the barrier from
using branch history from before the barrier while BHI_DIS_S is
enabled. On older systems this will map to a NOP. It is recommended to
add this fence at the end of the cBPF program to support VM migration.
This instruction is required on newer parts with BHI_NO to fully
mitigate against these attacks.
The current code disables the mitigation for anything running with the
SYS_ADMIN capability bit set. The intention was not to waste time
mitigating a process that has access to anything it wants anyway"
* tag 'ibti-hisory-for-linus-2025-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bhi: Do not set BHI_DIS_S in 32-bit mode
x86/bpf: Add IBHF call at end of classic BPF
x86/bpf: Call branch history clearing sequence on exit
|
|
The v6.15 PR contained the transition to "qcom,calibration-variant" and
was not accepted due to the risk of breaking bisection support. Merge
the arm32-for-6.15 tag in order to bring these patches into v6.16.
|
|
Enable the Focaltech FT8719 touchscreen controller used in the Poco F1
(EBBG) panel variant.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-4-bfb53da52945@joelselvaraj.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the Novatek NT36672A touchscreen controller used in the Poco F1
(Tianma) panel variant.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-3-bfb53da52945@joelselvaraj.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable qupv3_id_1 and gpi_dma1 as they are required for configuring
touchscreen. Also add pinctrl configurations needed for touchscreen.
These are common for both the tianma and ebbg touchscreen variant.
In the subsequent patches, we will enable support for the Novatek NT36672a
touchscreen and FocalTech FT8719 touchscreen that are used in the Poco F1
Tianma and EBBG panel variant respectively. This is done in preparation
for that.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-2-bfb53da52945@joelselvaraj.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the PCIe SMMU node to enable address translations
for pcie.
Reviewed-by: Dmitry Baryshkov <lumag@kernel.org>
Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250508-qcs8300-pcie-smmu-v3-1-c6b4453b0b22@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Back when display support was added initially to CRD, and we used to have
two separate compatibles for eDP and DP, it was supposed to override the
DP compatible with the eDP one in the board specific devicetree. Since
then, the DP driver has been reworked to figure out the eDP/DP at runtime
while only DP compatible remained in the end.
Even though the override does nothing basically, drop it to avoid
further confusion. Drop it from all X Elite based platforms.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250509-x1e80100-dts-drop-useless-dp-compatible-override-v2-1-126db05cb70a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
After some digging in downstream sources, it was found that the vddio_disp
regulator's output voltage is 1.8V. This is further confirmed by the
troubleshooting guide. Specify its output voltage as such.
While at it, add a comment specifying the IC, which according to the
schematic is the TI TPS22902.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/6143603464a65aebbed281fe6c6164316dd07269.1746711762.git.stano.jakubek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
After some digging in downstream sources, it was found that the TPS65132
outputs are fixed to +5.4V and -5.4V respectively. This is further confirmed
on runtime through debugfs, the troubleshooting guide confirms this as well.
Specify these limits as such.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/b67ed6c7813fa52cf00b473dded9b5042102f593.1746711762.git.stano.jakubek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
While the currently supported hardware works fine with the default clock
frequencies of 100000 on both I2C2 and I2C3, downstream sources list the
frequencies as 100000 for I2C2 and 400000 for I2C3. Update them as such.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/5a8191e3758e0df78b4213102f25ceadc28cd427.1746711762.git.stano.jakubek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Makes the display work without clk_ignore_unused and pd_ignore_unused.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/cdb6915bf40c055c77a0beb2f49c20458adf7481.1746711762.git.stano.jakubek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix delayed timers
- Fix NULL pointer deref
- Fix wrong range check
* tag 'mips-fixes_6.15_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix MAX_REG_OFFSET
MIPS: CPS: Fix potential NULL pointer dereferences in cps_prepare_cpus()
MIPS: rename rollback_handler with skipover_handler
MIPS: Move r4k_wait() to .cpuidle.text section
MIPS: Fix idle VS timer enqueue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a boot regression on very old x86 CPUs without CPUID support"
* tag 'x86-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Consolidate the loader enablement checking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc timers fixes from Ingo Molnar:
- Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks
- Work around absolute relocations into vDSO code that GCC erroneously
emits in certain arm64 build environments
- Fix a false positive lockdep warning in the i8253 clocksource driver
* tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable()
arm64: vdso: Work around invalid absolute relocations from GCC
timekeeping: Prevent coarse clocks going backwards
|
|
As described, the analogix-dp controller on rk3588 only supports 2 clocks
and the edp0 node handles that correctly.
The edp1 node on the other hand seems to have a dangling 3rd clock called
spdif, that probably only exists in the vendor-tree.
As that is not handled at all, remove it for now so that we adhere to the
binding.
Fixes: a481bb0b1ad9 ("arm64: dts: rockchip: Add eDP1 dt node for rk3588")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250509152329.2004073-1-heiko@sntech.de
|
|
DRAM: DDR4
Storage: eMMC
PMIC: RK809
Audio: Headphone and speaker
Interface:
- USB3.0 HOST
- USB2.0 HOST
- PCIe x4 slot(pcie2x1 available)
- SD card slot
- GMAC
- debug UART0
NOTE: the USB3.0 and the PCIe reuse the comboPHY, so the USB3.0 work in
USB2 only mode.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Link: https://lore.kernel.org/r/20250509102308.761424-6-kever.yang@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
RK3562 is a SoC from Rockchip, which embedded with quad
ARM Cortex-A53.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Link: https://lore.kernel.org/r/20250509102308.761424-5-kever.yang@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The GHCB_MSR_VMPL_REQ_LEVEL macro lacked parentheses around the bitmask
expression, causing the shift operation to bind too early. As a result,
when requesting VMPL1 (e.g., GHCB_MSR_VMPL_REQ_LEVEL(1)), incorrect
values such as 0x000000016 were generated instead of the intended
0x100000016 (the requested VMPL level is specified in GHCBData[39:32]).
Fix the precedence issue by grouping the masked value before applying
the shift.
[ bp: Massage commit message. ]
Fixes: 34ff65901735 ("x86/sev: Use kernel provided SVSM Calling Areas")
Signed-off-by: Seongman Lee <augustus92@kaist.ac.kr>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250511092329.12680-1-cloudlee1719@gmail.com
|
