| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As pmu_msr_{read,write}() are now wrappers of pmu_msr_chk_emulated(),
remove them and use pmu_msr_chk_emulated() directly.
As pmu_msr_chk_emulated() could easily return false in the cases where
it would set *emul to false, remove the "emul" argument and use the
return value instead.
While at it, convert the data type of MSR index to u32 in functions
called in pmu_msr_chk_emulated().
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-12-xin@zytor.com
|
|
pmu_msr_{read,write}()
hpa found that pmu_msr_write() is actually a completely pointless
function:
https://lore.kernel.org/lkml/0ec48b84-d158-47c6-b14c-3563fd14bcc4@zytor.com/
all it does is shuffle some arguments, then calls pmu_msr_chk_emulated()
and if it returns true AND the emulated flag is clear then does
*exactly the same thing* that the calling code would have done if
pmu_msr_write() itself had returned true.
And pmu_msr_read() does the equivalent stupidity.
Remove the calls to native_{read,write}_msr{,_safe}() within
pmu_msr_{read,write}(). Instead reuse the existing calling code
that decides whether to call native_{read,write}_msr{,_safe}() based
on the return value from pmu_msr_{read,write}(). Consequently,
eliminate the need to pass an error pointer to pmu_msr_{read,write}().
While at it, refactor pmu_msr_write() to take the MSR value as a u64
argument, replacing the current dual u32 arguments, because the dual
u32 arguments were only used to call native_write_msr{,_safe}(), which
has now been removed.
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-11-xin@zytor.com
|
|
__rdmsr() is the lowest level MSR write API, with native_rdmsr()
and native_rdmsrq() serving as higher-level wrappers around it.
#define native_rdmsr(msr, val1, val2) \
do { \
u64 __val = __rdmsr((msr)); \
(void)((val1) = (u32)__val); \
(void)((val2) = (u32)(__val >> 32)); \
} while (0)
static __always_inline u64 native_rdmsrq(u32 msr)
{
return __rdmsr(msr);
}
However, __rdmsr() continues to be utilized in various locations.
MSR APIs are designed for different scenarios, such as native or
pvops, with or without trace, and safe or non-safe. Unfortunately,
the current MSR API names do not adequately reflect these factors,
making it challenging to select the most appropriate API for
various situations.
To pave the way for improving MSR API names, convert __rdmsr()
uses to native_rdmsrq() to ensure consistent usage. Later, these
APIs can be renamed to better reflect their implications, such as
native or pvops, with or without trace, and safe or non-safe.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-10-xin@zytor.com
|
|
__rdmsr() is the lowest-level primitive MSR read API, implemented in
assembly code and returning an MSR value in a u64 integer, on top of
which a convenience wrapper native_rdmsr() is defined to return an MSR
value in two u32 integers. For some reason, native_rdmsrq() is not
defined and __rdmsr() is directly used when it needs to return an MSR
value in a u64 integer.
Add the native_rdmsrq() helper, which is simply an alias of __rdmsr(),
to make native_rdmsr() and native_rdmsrq() a pair of MSR read APIs.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-9-xin@zytor.com
|
|
__wrmsr() is the lowest level MSR write API, with native_wrmsr()
and native_wrmsrq() serving as higher-level wrappers around it:
#define native_wrmsr(msr, low, high) \
__wrmsr(msr, low, high)
#define native_wrmsrl(msr, val) \
__wrmsr((msr), (u32)((u64)(val)), \
(u32)((u64)(val) >> 32))
However, __wrmsr() continues to be utilized in various locations.
MSR APIs are designed for different scenarios, such as native or
pvops, with or without trace, and safe or non-safe. Unfortunately,
the current MSR API names do not adequately reflect these factors,
making it challenging to select the most appropriate API for
various situations.
To pave the way for improving MSR API names, convert __wrmsr()
uses to native_wrmsr{,q}() to ensure consistent usage. Later,
these APIs can be renamed to better reflect their implications,
such as native or pvops, with or without trace, and safe or
non-safe.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-8-xin@zytor.com
|
|
The pv_ops PMC read API is defined as:
u64 (*read_pmc)(int counter);
But Xen PMC read functions return 'unsigned long long', make them
return u64 consistently.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-7-xin@zytor.com
|
|
Functions offer type safety and better readability compared to macros.
Additionally, always inline functions can match the performance of
macros. Converting the rdpmc() macro into an always inline function
is simple and straightforward, so just make the change.
Moreover, the read result is now the returned value, further enhancing
readability.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-6-xin@zytor.com
|
|
Now that rdpmc() is gone, rdpmcl() is the sole PMC read helper,
simply rename rdpmcl() to rdpmc().
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-5-xin@zytor.com
|
|
rdpmc() is not used anywhere anymore, remove it.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-4-xin@zytor.com
|
|
Relocate rdtsc{,_ordered}() from <asm/msr.h> to <asm/tsc.h>.
[ mingo: Do not remove the <asm/tsc.h> inclusion from <asm/msr.h>
just yet, to reduce -next breakages. We can do this later
on, separately, shortly before the next -rc1. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-3-xin@zytor.com
|
|
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
|
|
We are going to use them from multiple headers, and in any case,
such register access wrapper macros are better in <asm/asm.h>
anyway.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: linux-kernel@vger.kernel.org
|
|
DECLARE_ARGS() is way too generic of a name that says very little about
why these args are declared in that fashion - use the EAX_EDX_ prefix
to create a common prefix between the three helper methods:
EAX_EDX_DECLARE_ARGS()
EAX_EDX_VAL()
EAX_EDX_RET()
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: linux-kernel@vger.kernel.org
|
|
DECLARE_ARGS()/EAX_EDX_VAL()/EAX_EDX_RET() facility
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: linux-kernel@vger.kernel.org
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix the following build warning:
usr/include/asm/papr-platform-dump.h:12: found __[us]{8,16,32,64} type without #include <linux/types.h>
Fixes: 8aa9efc0be66 ("powerpc/pseries: Add papr-platform-dump character driver for dump retrieval")
Closes: https://lore.kernel.org/linux-next/20250429185735.034ba678@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
[Maddy: fixed the commit to combine tags together]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250429211419.1081354-1-haren@linux.ibm.com
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc5).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bluetooth is available on the other Panda board versions, too, so move
stuff to common and specify the needed clock properly.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20250427052735.88133-3-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The Pandaboard needs a 32k clock in the TWL6030 to be enabled
for Wifi to work.
With some luck, it is enabled by some U-Boot fork.
Do not rely on it and properly specify the requirement.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20250427052735.88133-2-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") added some additional CPUs to the
Spectre-BHB workaround, including some new arrays for designs that
require new 'k' values for the workaround to be effective.
Unfortunately, the new arrays omitted the sentinel entry and so
is_midr_in_range_list() will walk off the end when it doesn't find a
match. With UBSAN enabled, this leads to a crash during boot when
is_midr_in_range_list() is inlined (which was more common prior to
c8c2647e69be ("arm64: Make _midr_in_range_list() an exported
function")):
| Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP
| pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : spectre_bhb_loop_affected+0x28/0x30
| lr : is_spectre_bhb_affected+0x170/0x190
| [...]
| Call trace:
| spectre_bhb_loop_affected+0x28/0x30
| update_cpu_capabilities+0xc0/0x184
| init_cpu_features+0x188/0x1a4
| cpuinfo_store_boot_cpu+0x4c/0x60
| smp_prepare_boot_cpu+0x38/0x54
| start_kernel+0x8c/0x478
| __primary_switched+0xc8/0xd4
| Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: aarch64 BRK: Fatal exception
Add the missing sentinel entries.
Cc: Lee Jones <lee@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: <stable@vger.kernel.org>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250501104747.28431-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
17 years ago, Venki suggested [1] "A future improvement would be to
avoid the range_is_allowed duplication".
The only thing preventing a common implementation is that
phys_mem_access_prot_allowed() expects the range check to exit
immediately when PAT is disabled [2]. I.e. there is no cache conflict to
manage in that case. This cleanup was noticed on the path to
considering changing range_is_allowed() policy to blanket deny /dev/mem
for private (confidential computing) memory.
Note, however that phys_mem_access_prot_allowed() has long since stopped
being relevant for managing cache-type validation due to [3], and [4].
Commit 0124cecfc85a ("x86, PAT: disable /dev/mem mmap RAM with PAT") [1]
Commit 9e41bff2708e ("x86: fix /dev/mem mmap breakage when PAT is disabled") [2]
Commit 1886297ce0c8 ("x86/mm/pat: Fix BUG_ON() in mmap_mem() on QEMU/i386") [3]
Commit 0c3c8a18361a ("x86, PAT: Remove duplicate memtype reserve in devmem mmap") [4]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250430024622.1134277-2-dan.j.williams%40intel.com
|
|
The USB-C port on the NanoPC-T6 was not providing VBUS (vbus5v0_typec
regulator disabled, gpio-58 out lo) due to misconfiguration. The
original setup with regulator-always-on and regulator-boot-on forced
the port on, masking the issue, but removing these properties revealed
that the fusb302 driver was not enabling the regulator dynamically.
Changes:
- Removed regulator-always-on and regulator-boot-on from vbus5v0_typec
and vbus5v0_usb to allow driver control.
- Changed power-role from "source" to "dual" in the usb-c-connector to
support OTG functionality.
- Added pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2> to the FUSB302MPX
node to specify USB Power Delivery (PD) Revision 2.0, Version 1.2,
ensuring the driver correctly advertises PD capabilities and
negotiates power roles (source/sink).
- Added op-sink-microwatt and sink-pdos for proper sink mode
configuration (1W min, 15W max).
- Added typec-power-opmode = "1.5A" to enable 1.5A fallback for non-PD
USB-C devices, aligning with the 5V/2A hardware limit.
- Set try-power-role to "source" to prioritize VBUS enablement.
- Adjusted usb_host0_xhci dr_mode from "host" to "otg" and added
usb-role-switch for dual-role support.
Testing:
- Verified VBUS (5V) delivery to a sink device (USB thumb drive).
- Confirmed USB host mode with lsusb detecting connected devices.
- Validated USB device mode with adb devices when connected to a PC.
- Tested dual-role (OTG) functionality with try-power-role set to
"source" and "sink"; "source" prioritizes faster VBUS activation.
- Validated functionality with a mobile device, including USB Power
Delivery, file transfer, USB tethering, MIDI, and image transfer.
- Tested USB-C Ethernet adapter compatibility in host mode.
- Tested USB-C hub compatibility in host mode.
Signed-off-by: John Clark <inindev@gmail.com>
Link: https://lore.kernel.org/r/20250422210345.196050-1-inindev@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Not resetting smstateen is a potential security hole, because VU might
be able to access state that VS does not properly context-switch.
Fixes: 81f0f314fec9 ("RISCV: KVM: Add sstateen0 context save/restore")
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Link: https://lore.kernel.org/r/20250403112522.1566629-8-rkrcmar@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add initial devicetree support for Samsung Galaxy J6 (codename: j6lte),
an Exynos7870 device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250501-exynos7870-v7-5-bb579a27e5eb@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add initial devicetree support for Samsung Galaxy A2 Core
(codename: a2corelte), an Exynos7870 device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250501-exynos7870-v7-4-bb579a27e5eb@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add initial devicetree support for Samsung Galaxy J7 Prime
(codename: on7xelte), an Exynos7870 device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250501-exynos7870-v7-3-bb579a27e5eb@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Exynos7870 is an arm64 SoC manufactured by Samsung and announced in
2016. It is present in multiple mid-range Samsung phones and tablets.
Add basic devicetree support for the SoC, which includes CMUs, pin
controllers, I2C, UART, DW-MMC, and USB-DRD.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250501-exynos7870-v7-2-bb579a27e5eb@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Orange Pi 5 Max and Ultra has onboard AP6611s with Bluetooth 5.3
connected via UART7.
The chip reports as:
[ 3.747864] Bluetooth: hci0: BCM: chip id 3
[ 3.750021] Bluetooth: hci0: BCM: features 0x0f
[ 3.775923] Bluetooth: hci0: SYN43711A0
[ 3.775930] Bluetooth: hci0: BCM (001.001.030) build 0000
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250427182019.1862-1-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add device tree entries for NVMEM cells present on the PMIC
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Co-developed-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250423-spmi-nvmem-v3-3-2985aa722ddc@gmail.com
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
Now that gcc-8 and binutils-2.30 are the minimum versions, a lot of
the individual feature checks can go away for simplification.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit a3e8fe814ad1 ("x86/build: Raise the minimum GCC version to 8.1")
raised the minimum compiler version as enforced by Kbuild to gcc-8.1
and clang-15 for x86.
This is actually the same gcc version that has been discussed as the
minimum for all architectures several times in the past, with little
objection. A previous concern was the kernel for SLE15-SP7 needing to
be built with gcc-7. As this ended up still using linux-6.4 and there
is no plan for an SP8, this is no longer a problem.
Change it for all architectures and adjust the documentation accordingly.
A few version checks can be removed in the process. The binutils
version 2.30 is the lowest version used in combination with gcc-8 on
common distros, so use that as the corresponding minimum.
Link: https://lore.kernel.org/lkml/20240925150059.3955569-32-ardb+git@google.com/
Link: https://lore.kernel.org/lkml/871q7yxrgv.wl-tiwai@suse.de/
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix MAX_REG_OFFSET to point to the last register in 'pt_regs' and not to
the marker itself, which could allow regs_get_register() to return an
invalid offset.
Fixes: 40e084a506eb ("MIPS: Add uprobes support.")
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Historically fpsimd_to_sve() and sve_to_fpsimd() were (conditionally)
called by functions which were defined regardless of CONFIG_ARM64_SVE.
Hence it was necessary that both fpsimd_to_sve() and sve_to_fpsimd()
were always defined and not guarded by ifdeffery.
As a result of the removal of fpsimd_signal_preserve_current_state() in
commit:
929fa99b1215966f ("arm64/fpsimd: signal: Always save+flush state early")
... sve_to_fpsimd() has no callers when CONFIG_ARM64_SVE=n, resulting in
a build-time warnign that it is unused:
| arch/arm64/kernel/fpsimd.c:676:13: warning: unused function 'sve_to_fpsimd' [-Wunused-function]
| 676 | static void sve_to_fpsimd(struct task_struct *task)
| | ^~~~~~~~~~~~~
| 1 warning generated.
In contrast, fpsimd_to_sve() still has callers which are defined when
CONFIG_ARM64_SVE=n, and it would be awkward to hide this behind
ifdeffery and/or to use stub functions.
For now, suppress the warning by marking both fpsimd_to_sve() and
sve_to_fpsimd() as 'static inline', as we usually do for stub functions.
The compiler will no longer warn if either function is unused.
Aside from suppressing the warning, there should be no functional change
as a result of this patch.
Link: https://lore.kernel.org/linux-arm-kernel/20250429194600.GA26883@willie-the-truck/
Reported-by: Will Deacon <will@kernel.org>
Fixes: 929fa99b1215 ("arm64/fpsimd: signal: Always save+flush state early")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250430173240.4023627-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
strcpy() is deprecated due to issues with bounds checking and overflows.
Replace it with strscpy().
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250429230710.54014-1-rubenru09@aol.com
|
|
After
6f059e634dcd("x86/microcode: Clarify the late load logic"),
if the load is up-to-date, the AMD side returns UCODE_OK which leads to
load_late_locked() returning -EBADFD.
Handle UCODE_OK in the switch case to avoid this error.
[ bp: Massage commit message. ]
Fixes: 6f059e634dcd ("x86/microcode: Clarify the late load logic")
Signed-off-by: Annie Li <jiayanli@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250430053424.77438-1-jiayanli@google.com
|
|
When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on
VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE
value. Consulting only the host kernel's host vs. guest masks results in
running the guest with PEBS enabled even when the guest doesn't want to use
PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply
looking at exclude_host can't differentiate between events created by host
userspace, and events created by KVM on behalf of the guest.
Running the guest with PEBS unexpectedly enabled typically manifests as
crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't
written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when
trying to record PEBS events.
The issue is most easily reproduced by running `perf kvm top` from before
commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after
which, `perf kvm top` effectively stopped using PEBS). The userspace side
of perf creates a guest-only PEBS event, which intel_guest_get_msrs()
misconstrues a guest-*owned* PEBS event.
Arguably, this is a userspace bug, as enabling PEBS on guest-only events
simply cannot work, and userspace can kill VMs in many other ways (there
is no danger to the host). However, even if this is considered to be bad
userspace behavior, there's zero downside to perf/KVM restricting PEBS to
guest-owned events.
Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily
in two rare situations") fixed the case where host userspace is profiling
KVM *and* userspace, but missed the case where userspace is profiling only
KVM.
Fixes: c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Closes: https://lore.kernel.org/all/Z_VUswFkWiTYI0eD@do-x1carbon
Reported-by: Seth Forshee <sforshee@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250426001355.1026530-1-seanjc@google.com
|
|
Remove the optimized strcpy() library implementation. This doesn't make any
difference since gcc recognizes all strcpy() usages anyway and uses the
builtin variant. There is not a single branch to strcpy() within the
generated kernel image, which also seems to be the reason why most other
architectures don't have a strcpy() implementation anymore.
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert all strcpy() usages to strscpy(). strcpy() is deprecated since
it performs no bounds checking on the destination buffer.
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert all strcpy() usages to strscpy() where the conversion means
just replacing strcpy() with strscpy(). strcpy() is deprecated since
it performs no bounds checking on the destination buffer.
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add a new parameter xflags to the in-kernel API function
pkey_key2protkey(). Currently there is only one flag supported:
* PKEY_XFLAG_NOMEMALLOC:
If this flag is given in the xflags parameter, the pkey
implementation is not allowed to allocate memory but instead should
fall back to use preallocated memory or simple fail with -ENOMEM.
This flag is for protected key derive within a cipher or similar
which must not allocate memory which would cause io operations - see
also the CRYPTO_ALG_ALLOCATES_MEMORY flag in crypto.h.
The one and only user of this in-kernel API - the skcipher
implementations PAES in paes_s390.c set this flag upon request
to derive a protected key from the given raw key material.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-26-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Provide and pass the xflag parameter from pkey ioctls through
the pkey handler and further down to the implementations
(CCA, EP11, PCKMO and UV). So all the code is now prepared
and ready to support xflags ("execution flag").
The pkey layer supports the xflag PKEY_XFLAG_NOMEMALLOC: If this
flag is given in the xflags parameter, the pkey implementation is
not allowed to allocate memory but instead should fall back to use
preallocated memory or simple fail with -ENOMEM. This flag is for
protected key derive within a cipher or similar which must not
allocate memory which would cause io operations - see also the
CRYPTO_ALG_ALLOCATES_MEMORY flag in crypto.h.
Within the pkey handlers this flag is then to be translated to
appropriate zcrypt xflags before any zcrypt related functions
are called. So the PKEY_XFLAG_NOMEMALLOC translates to
ZCRYPT_XFLAG_NOMEMALLOC - If this flag is set, no memory
allocations which may trigger any IO operations are done.
The pkey in-kernel pkey API still does not provide this xflag
param. That's intended to come with a separate patch which
enables this functionality.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-25-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The uv_get_secret_metadata() in-kernel function was only
offered and used by the pkey uv handler. Remove it as there
is no customer any more.
Suggested-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-24-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Rename the internal UV function find_secret() to uv_find_secret()
and publish it as new UV API in-kernel function.
The pkey uv handler may be called in a do-not-allocate memory
situation where sleeping is allowed but allocating memory which
may cause IO operations is not. For example when an encrypted
swap file is used and the encryption is done via UV retrievable
secrets with protected keys.
The UV API function uv_get_secret_metadata() allocates memory
and then calls the find_secret() function. By exposing the
find_secret() function as a new UV API function uv_find_secret()
it is possible to retrieve UV secret meta data without any
memory allocations from the UV when the caller offers space
for one struct uv_secret_list.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-22-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In CPUMF attribute definitions for z15 all CPUMF attributes
have configuration values of the form 0x0[0-9a-f]{3} .
However 2 defines do not match this scheme, they have two leading
zeroes instead of one. Adjust this. No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Restructure SRSO to use select/update/apply functions to create
consistent vulnerability handling. Like with retbleed, the command line
options directly select mitigations which can later be modified.
While at it, remove a comment which doesn't apply anymore due to the
changed mitigation detection flow.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-17-david.kaplan@amd.com
|
|
Add cmu_cpucl1/2(CPU Cluster 1 and CPU Cluster 2) clocks
for switch, cluster domains respectively.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250428113517.426987-5-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The "snps,data-width" property[1] defines the AXI data width of the DMA
controller as:
width = 8 × (2^n) bits
(0 = 8 bits, 1 = 16 bits, 2 = 32 bits, ..., 6 = 512 bits)
where "n" is the value of "snps,data-width".
For the CV18xx DMA controller, the correct AXI data width is 32 bits,
corresponding to "snps,data-width = 2".
Test results on Milkv Duo S can be found here [2].
Link: https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/dma/snps%2Cdw-axi-dmac.yaml#L74 [1]
Link: https://gist.github.com/Sutter099/4fa99bb2d89e5af975983124704b3861 [2]
Fixes: 514951a81a5e ("riscv: dts: sophgo: cv18xx: add DMA controller")
Co-developed-by: Yu Yuan <yu.yuan@sjtu.edu.cn>
Signed-off-by: Yu Yuan <yu.yuan@sjtu.edu.cn>
Signed-off-by: Ze Huang <huangze@whut.edu.cn>
Link: https://lore.kernel.org/r/20250428-duo-dma-config-v1-1-eb6ad836ca42@whut.edu.cn
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
The sha512 state size in s390_sha_ctx is out by a factor of 8,
fix it so that it stays below HASH_MAX_DESCSIZE. Also fix the
state init function which was writing garbage to the state. Luckily
this is not actually used for anything other than export.
Reported-by: Harald Freudenberger <freude@linux.ibm.com>
Fixes: 572b5c4682c7 ("crypto: s390/sha512 - Use API partial block handling")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The Rockchip RK3576 features two SATA nodes. The first, sata0, is behind
combphy0, which muxes between pcie0 and sata0.
The second, sata1, is behind combphy1, which muxes between pcie1, sata1
and usb_drd1_dwc3.
I've only been able to test sata0 on my board, but it appears to work
just fine.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250424-rk3576-sata-v1-2-23ee89c939fe@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Someone made a typo when they added the RTC to the Sige5 DTS, which
resulted in it using interrupts from GPIO0 B0 instead of GPIO0 A0. The
pinctrl entry for it wasn't typoed though, curiously enough.
The Sige5 v1.1 schematic was used to verify that GPIO0 A0 is the correct
pin for the RTC wakeup interrupt, so let's change it to that.
Fixes: 40f742b07ab2 ("arm64: dts: rockchip: Add rk3576-armsom-sige5 board")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250429-sige5-rtc-oopsie-v1-1-8686767d0f1f@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
