summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2022-11-21Merge tag 'renesas-riscv-defconfig-for-v6.2-tag1' of ↵Arnd Bergmann1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig Renesas RISC-V defconfig updates for v6.2 - Enable support for the Renesas RZ/Five SoC and the RZ/Five SMARC EVK board in the risc-v defconfig. * tag 'renesas-riscv-defconfig-for-v6.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: riscv: configs: defconfig: Enable Renesas RZ/Five SoC Link: https://lore.kernel.org/r/cover.1668788928.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21Merge tag 'renesas-arm-defconfig-for-v6.2-tag1' of ↵Arnd Bergmann1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig Renesas ARM defconfig updates for v6.2 - Enable support for Renesas R-Car S4-8 Spider Ethernet devices in the arm64 defconfig. * tag 'renesas-arm-defconfig-for-v6.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: defconfig: Enable Renesas R-Car S4-8 Spider Ethernet devices Link: https://lore.kernel.org/r/cover.1668788920.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21ARM: multi_v7_defconfig: enable Type-C UCSI and STM32G0 as modulesFabrice Gasnier1-0/+2
Enable the USB Type-C UCSI, and the STM32G0 UCSI drivers as modules, since used on STM32MP13 board. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Link: https://lore.kernel.org/r/20221117103931.26174-1-alexandre.torgue@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21arm64: dts: renesas: Rename DTB overlay source files from .dts to .dtsoAndrew Davis2-0/+0
DTB Overlays (.dtbo) can now be built from source files with the extension (.dtso). This makes it clear what is the content of the files and differentiates them from base DTB source files. Convert the DTB overlay source files in the arm64/renesas directory. Signed-off-by: Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20221024173434.32518-6-afd@ti.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-11-21dma-mapping: reject __GFP_COMP in dma_alloc_attrsChristoph Hellwig1-17/+0
DMA allocations can never be turned back into a page pointer, so requesting compound pages doesn't make sense and it can't even be supported at all by various backends. Reject __GFP_COMP with a warning in dma_alloc_attrs, and stop clearing the flag in the arm dma ops and dma-iommu. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
2022-11-21ARM: ixp4xx: Remove unused static mapLinus Walleij1-21/+4
The IXP4xx is just using the device tree now, only keep the static UART map if and only if we are debugging. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-20Merge tag 'x86_urgent_for_v6.1_rc6' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Do not hold fpregs lock when inheriting FPU permissions because the fpregs lock disables preemption on RT but fpu_inherit_perms() does spin_lock_irq(), which, on RT, uses rtmutexes and they need to be preemptible. - Check the page offset and the length of the data supplied by userspace for overflow when specifying a set of pages to add to an SGX enclave * tag 'x86_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Drop fpregs lock before inheriting FPU permissions x86/sgx: Add overflow check in sgx_validate_offset_length()
2022-11-20Merge tag 'perf_urgent_for_v6.1_rc6' of ↵Linus Torvalds3-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Fix an intel PT erratum where CPUs do not support single range output for more than 4K - Fix a NULL ptr dereference which can happen after an NMI interferes with the event enabling dance in amd_pmu_enable_all() - Free the events array too when freeing uncore contexts on CPU online, thereby fixing a memory leak - Improve the pending SIGTRAP check * tag 'perf_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/pt: Fix sampling using single range output perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling perf/x86/amd/uncore: Fix memory leak for events array perf: Improve missing SIGTRAP checking
2022-11-20Merge tag 'locking_urgent_for_v6.1_rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Borislav Petkov: - Fix a build error with clang 11 * tag 'locking_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking: Fix qspinlock/x86 inline asm error
2022-11-20Merge tag 'powerpc-6.1-5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: - Fix writable sections being moved into the rodata region. Thanks to Nicholas Piggin and Christophe Leroy. * tag 'powerpc-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Fix writable sections being moved into the rodata region
2022-11-20ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodesJonathan Neuschäfer5-10/+10
The unit addresses do not correspond to the nodes' reg properties, because they don't have any. Fixes: e42b650f828d ("ARM: dts: nuvoton: Add new device nodes to NPCM750 EVB") Fixes: ee33e2fb3d70 ("ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree") Fixes: 59f5abe09f0a ("ARM: dts: nuvoton: Add Quanta GSJ BMC") Fixes: 14579c76f5ca ("ARM: dts: nuvoton: Add Fii Kudo system") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20221031221553.163273-1-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: nuvoton,wpcm450-supermicro-x9sci-ln4f: Add GPIO line namesJonathan Neuschäfer1-0/+18
To make gpioinfo output more useful and enable gpiofind usage, add line names for GPIOs where the function is known. This patch follows the naming convention defined for OpenBMC, as much as possible: https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20221101102916.440526-1-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: mtjade: Add SMPro nodesQuan Nguyen1-0/+8
Add SMPro nodes to Mt. Jade BMC. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Link: https://lore.kernel.org/r/20221118065109.2339066-1-quan@os.amperecomputing.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodesQuan Nguyen2-0/+8
Add BMC SSIF node to support IPMI in-band communication. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Link: https://lore.kernel.org/r/20221024081115.3320584-1-quan@os.amperecomputing.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: Add Delta AHE-50DC BMCZev Weiss2-0/+419
This is a 1U Open19 power shelf with six PSUs and 50 12VDC outputs via LM25066 efuses. It's managed by a pair of AST1250 BMCs in a redundant active/active configuration using a PCA9541 on each I2C bus to arbitrate access between the two. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20221108001551.18175-3-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: rainier: Fix pca9551 nodesSantosh Puranik1-104/+104
The pca9551 compatible LED drivers are under the pca9546 mux on Rainier pass > 1. On pass 1, they are directly connected to the aspeed i2c. Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20221102223554.1738642-1-joel@jms.id.au
2022-11-20ARM: dts: aspeed: p10bmc: Add occ-hwmon nodesEddie James3-0/+70
Add the occ-hwmon nodes in order to specify that the occ-hwmon driver should not poll the OCC during initialization. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20221101213212.643472-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed-g6: Add aliases for mdio nodesPotin Lai1-0/+4
Add aliases for mdio nodes so that we can use name to lookup the bus address of Aspeed SOC. For example: root@bletchley:~# cat /sys/firmware/devicetree/base/aliases/mdio0 /ahb/mdio@1e650000 root@bletchley:~# cat /sys/firmware/devicetree/base/aliases/mdio1 /ahb/mdio@1e650008 root@bletchley:~# cat /sys/firmware/devicetree/base/aliases/mdio2 /ahb/mdio@1e650010 root@bletchley:~# cat /sys/firmware/devicetree/base/aliases/mdio3 /ahb/mdio@1e650018 Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://lore.kernel.org/r/20221025055046.1704920-1-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: Remove MihawkJoel Stanley2-1382/+0
The platform has been removed from OpenBMC as it is unmaintained. Link: https://lore.kernel.org/r/20221020224420.635938-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: rainier,everest: Move reserved memory regionsAdriana Kobylak2-16/+17
Move the reserved regions to account for a decrease in DRAM when ECC is enabled. ECC takes 1/9th of memory. Running on HW with ECC off, u-boot prints: DRAM: already initialized, 1008 MiB (capacity:1024 MiB, VGA:16 MiB, ECC:off) And with ECC on, u-boot prints: DRAM: already initialized, 896 MiB (capacity:1024 MiB, VGA:16 MiB, ECC:on, ECC size:896 MiB) This implies that MCR54 is configured for ECC to be bounded at the bottom of a 16MiB VGA memory region: 1024MiB - 16MiB (VGA) = 1008MiB 1008MiB / 9 (for ECC) = 112MiB 1008MiB - 112MiB = 896MiB (available DRAM) The flash_memory region currently starts at offset 896MiB: 0xb8000000 (flash_memory offset) - 0x80000000 (base memory address) = 0x38000000 = 896MiB This is the end of the available DRAM with ECC enabled and therefore it needs to be moved. Since the flash_memory is 64MiB in size and needs to be 64MiB aligned, it can just be moved up by 64MiB and would sit right at the end of the available DRAM buffer. The ramoops region currently follows the flash_memory, but it can be moved to sit above flash_memory which would minimize the address-space fragmentation. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20220916195535.1020185-1-anoo@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: Add IBM Bonnell system BMC devicetreeEddie James2-0/+912
Add a devicetree for the new Bonnell system. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Jim Wright <wrightj@linux.ibm.com> Link: https://lore.kernel.org/r/20220818202422.741275-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: bletchley: Enable emmc and ehci1Potin Lai1-0/+12
Enable both emmc-controller and emmc nodes for storage soultion on bletchley, and enable ehci1 node as second storage plan. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220929013130.1916525-3-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: bletchley: Update and fix gpio-line-namesPotin Lai1-2/+2
Update new GPIOM7 line name, and fixed typo of GPION6 line name New GPIO: - GPIOM7: USB_DEBUG_PWR_BTN_N Fixed GPIO: - GPION6: LED_POSTCODE_5 --> LED_POSTCODE_6 Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220929013130.1916525-2-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: bletchley: Update fusb302 nodesPotin Lai1-48/+102
1. Add interrupt pin of fusb302 on each sled. 2. Add vbus-supply property in each fusb302 node. 3. Fix BMC power-role at source and data-role at host. 4. Disable PD to avoid "HARD Reset" due to incompatible PD ver. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220613095150.21917-5-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: bletchley: Bind presence-sledX pins via gpio-keysPotin Lai1-0/+35
Bind presence-sledX pins via gpio-keys driver to monitor and export GPIO pin values on DBUS using phosphor-gpio-presence service. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220613095150.21917-4-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: bletchley: Disable GPIOV2 pull-downPotin Lai1-0/+10
The external pull-up cannot drive GPIOV2, so disable GPIOV2 internal pull-down resistor by the request form HW team. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220613095150.21917-3-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-20ARM: dts: aspeed: bletchley: Change LED sys_log_id to active lowPotin Lai1-1/+1
change LED sys_log_id to active low base on DVT schematic. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220613095150.21917-2-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-19x86/kaslr: Fix process_mem_region()'s return valueJiapeng Chong1-1/+1
Fix the following coccicheck warning: ./arch/x86/boot/compressed/kaslr.c:670:8-9: WARNING: return of 0/1 in function 'process_mem_region' with return type bool. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220421202556.129799-1-jiapeng.chong@linux.alibaba.com
2022-11-19arm64: dts: freescale: Rename DTB overlay source files from .dts to .dtsoAndrew Davis14-0/+0
DTB Overlays (.dtbo) can now be built from source files with the extension (.dtso). This makes it clear what is the content of the files and differentiates them from base DTB source files. Convert the DTB overlay source files in the arm64/freescale directory. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency propertiesFabio Estevam1-2/+2
make dtbs_check gives the following errors: ref-clock-frequency: size (9) error for type uint32 tcxo-clock-frequency: size (9) error for type uint32 Fix it by passing the frequencies inside < > as documented in Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Fixes: 0d446a505592 ("ARM: dts: add Protonic PRTI6Q board") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19arm64: dts: imx8mm-evk: add vcc supply for pca6416Adrian Alonso1-0/+1
pca6146 requires vcc-supply to work on i.MX8MM-EVK board. Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19arm64: dts: imx8m[m,q]-evk: change to use off-on-delay-us in regulatorHaibo Chen2-0/+2
Some SD Card controller and power circuitry has increased capacitance, so the usual toggling of regulator to power the card off and on is insufficient. According to SD spec, for sd card power reset operation, the sd card supply voltage needs to be lower than 0.5v and keep over 1ms, otherwise, next time power back the sd card supply voltage to 3.3v, sd card can't support SD3.0 mode again. This patch add the off-on-delay-us, make sure the sd power reset behavior is align with the specification. Without this patch, when do quick system suspend/resume test, some sd card can't work at SD3.0 mode after system resume back. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19arm64: dts: imx8mn-evk: enable uart1Peng Fan1-0/+18
Enable uart1 for BT usage Configure the clock to source from IMX8MN_SYS_PLL1_80M, because the uart could only support max 1.5M buadrate if using OSC_24M as clock source. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19arm64: dts: imx8mn-evk: add i2c gpio recovery settingsPeng Fan1-2/+22
Add I2C gpio recovery iomuxc settings Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19arm64: dts: imx8mn-evk: set off-on-delay-us in regulatorPeng Fan1-0/+1
Some SD Card controller and power circuitry has increased capacitance, so the usual toggling of regulator to power the card off and on is insufficient. According to SD spec, for sd card power reset operation, the sd card supply voltage needs to be lower than 0.5v and keep over 1ms, otherwise, next time power back the sd card supply voltage to 3.3v, sd card can't support SD3.0 mode again. This patch add the off-on-delay-us, make sure the sd power reset behavior is align with the specification. Without this patch, when do quick system suspend/resume test, some sd card can't work at SD3.0 mode after system resume back. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19arm64: dts: imx8mn-evk: update vdd_soc dvs voltagePeng Fan1-2/+1
Per schematic, BUCK1 is for VDD_SOC&DRAM&PU_0V9. The nxp,dvs-run-voltage and nxp,dvs-standby-voltage need set for BUCK1, not BUCK2. BUCK2 is for A53, which is handled by DVFS, so no need dvs property. nxp,dvs-run-voltage is not needed, since bootloader must configure voltage to make system boot well. Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19arm64: dts: imx8mp-evk: enable I2C2 nodePeng Fan1-0/+14
Enable I2C node for i.MX8MP-EVK Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19arm64: dts: imx8mp-evk: enable fspi nor on imx8mp evkHan Xu1-0/+25
enable fspi nor on imx8mp evk dts Reviewed-by: Frank Li <frank.li@nxp.com> Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19arm64: dts: imx8mp-evk: enable uart1/3 portsPeng Fan1-0/+36
Enable uart1/3 ports for evk board. Configure the clock to source from IMX8MP_SYS_PLL1_80M, because the uart could only support max 1.5M buadrate if using OSC_24M as clock source. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19ARM64: dts: imx8mp-evk: add pwm supportClark Wang1-0/+36
Enable pwm1/2/4 support. Enable pwm1 on pin GPIO1_IO01 for DSI_BL_PWM pwm2 on pin GPIO1_IO11 for LVDS_BL_PWM pwm4 on pin SAI5_RXFS for J21-32 Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19arm64: dts: imx8mp-evk: correct pcie pad settingsPeng Fan1-3/+3
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: d50650500064 ("arm64: dts: imx8mp-evk: Add PCIe support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19arm64: dts: imx8mp: add mlmix power domainPeng Fan1-0/+8
Add mlmix power domain Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19ARM: mxs: fix memory leak in mxs_machine_init()Zheng Yongjun1-1/+3
If of_property_read_string() failed, 'soc_dev_attr' should be freed before return. Otherwise there is a memory leak. Fixes: 2046338dcbc6 ("ARM: mxs: Use soc bus infrastructure") Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19ARM: dts: colibri-imx6ull: Enable dual-role switchingPhilippe Schenker1-0/+29
The Colibri standard provides a GPIO called USBC_DET to switch from USB Host to USB Device and back. Make use of this GPIO by adding it with usb-connector framework. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19arm64: dts: imx8mq: fix dtschema warning for imx7-csiMartin Kepplinger1-2/+2
According to dtschema for the csi bridge, compatible is an enum and only one must be used. Fixing this removes the following warning: compatible: 'oneOf' conditional failed, one must be fixed Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-19perf/x86: Make struct p4_event_bind::cntr signed arrayAlexey Dobriyan1-1/+1
struct p4_event_bind::cntr[][] should be signed because of the following code: int i, j; for (i = 0; i < P4_CNTR_LIMIT; i++) { ---> j = bind->cntr[thread][i]; if (j != -1 && !test_bit(j, used_mask)) return j; } Making this member unsigned will make "j" 255 and fail "j != -1" comparison. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-19Merge tag 'arm64-fixes' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix a build error with CONFIG_CFI_CLANG + CONFIG_FTRACE when CONFIG_FUNCTION_GRAPH_TRACER is not enabled. - Fix a BUG_ON triggered by the page table checker due to incorrect file_map_count for non-leaf pmd/pud (the arm64 pmd_user_accessible_page() not checking whether it's a leaf entry). * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/mm: fix incorrect file_map_count for non-leaf pmd/pud arm64: ftrace: Define ftrace_stub_graph only with FUNCTION_GRAPH_TRACER
2022-11-19ia64: remove unused __SLOW_DOWN_IO and SLOW_DOWN_IO definitionsBjorn Helgaas1-4/+0
Remove unused __SLOW_DOWN_IO and SLOW_DOWN_IO definitions. Link: https://lkml.kernel.org/r/20221014001911.3342485-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-19ia64/kprobes: remove orphan declarations from arch/ia64/include/asm/kprobes.hGaosheng Cui1-2/+0
flush_register_stack() and invalidate_stacked_regs() have been removed since commit 0aeaf6b3a345 ("ia64/kprobes: Remove jprobe implementation"), so remove them. Link: https://lkml.kernel.org/r/20220914124707.1483471-1-cuigaosheng1@huawei.com Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-19ia64: replace IS_ERR() with IS_ERR_VALUE()ye xingchen1-3/+3
Avoid typecasts that are needed for IS_ERR() and use IS_ERR_VALUE() instead. Link: https://lkml.kernel.org/r/20221020113004.400031-1-ye.xingchen@zte.com.cn Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Sergei Trofimovich <slyich@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 17:49:18 +0300