| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM boardfile deprecation from Arnd Bergmann:
"Over the past ten years, new machine support was based on device tree,
and an initial set of about 400 boards using ATAGS with boardfile for
booting were grandfathered in, with about half of them either removed
or converted to DT over time.
Based on the recent mailing list discussion I started, I have now
turned the findings into a set of patches that marks most board files
as 'depends on UNUSED_BOARD_FILES', leaving only 38 of the 196 boards.
For the boards that are marked as unused, there are two final chances
for potential users: The removal is scheduled to take place after the
longterm stable kernel at the end of 2022, so users can stay on that
version for another few years, and if anyone still has one of these
machines and is planning to keep updating kernels beyond that version,
they can speak up now to have their boards taken off the list again.
Waiting for the LTS release also makes sure that there will be at
least one longterm kernel that contains the recent multiplatform
conversion along while still supporting all legacy boards.
The short summary of the current status is:
- The s3c24xx, cns3xxx, iop32x and mv78xx0 platforms have no known
users and will be removed entirely.
- The mmp and davinci platforms have DT support for the important
machines and will become DT-only after this.
- s3c64xx, dove, orion5x, and pxa keep some board files to allow
those to be migrated over to DT more easily, but most board files
are getting removed now. DT support on these platforms is partially
working but requires changes to additional drivers for the other
boards.
- omap1, ep93xx, sa1100, footbridge and rpc have no DT support at the
moment but have some boards with known users. Removing the board
files that nobody uses should make it easier to try a DT conversion
if anyone cares.
There is no explicit timeline what happens with the boards that remain
after this removal, but I expect to revisit this in the future, and
with most boards gone, there will be a good time to do a treewide
review of platform drivers that never gained DT support and have no
remaining in-tree board files"
Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
* tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: cns3xxx: add CONFIG_UNUSED_BOARD_FILES dependency
ARM: iop32x: mark as unused
ARM: s3c: mark most board files as unused
ARM: omap1: add Kconfig dependencies for unused boards
ARM: sa1100: mark most boards as unused
ARM: footbridge: mark cats board for removal
ARM: mmp: mark all board files for removal
ARM: ep93xx: mark most board files as unused
ARM: davinci: mark all ATAGS board files as unused
ARM: orion: add ATAGS dependencies
ARM: pxa: add Kconfig dependencies for ATAGS based boards
ARM: add CONFIG_UNUSED_BOARD_FILES
ARM: add ATAGS dependencies to non-DT platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"This branch includes the usual updates to defconfig files, enabling
additional driver support for the supported platforms.
There is also a global refresh for all of them that reorders the lines
according to the 'savedefconfig' output, but without removing lines
that are no longer part of the refresh.
I went through the most common removed lines to also address them
while making sure to catch renamed options and add them back under the
new name.
The boardfile deprecation branch is based on top of this to avoid
conflicts against removing the unused boardfile configs from the
generic defconfig files"
* tag 'arm-defconfig-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: defconfig: Sync some configs with savedefconfig
arm64: refresh defconfig file
ARM: defconfig: kill remnants of CONFIG_LEDS
ARM: defconfig: remove broken CONFIG_THUMB disables
ARM: defconfig: address renamed CONFIG_DEBUG_INFO=y
ARM: defconfig: remove stale CONFIG_ZBOOT_ROM entries
ARM: defconfig: remove irda remnants
ARM: refresh defconfig files
arm64: defconfig: Demote Qualcomm USB PHYs to modules
arm64: defconfig: Enable Qualcomm SC8280XP providers
ARM: multi_v7_defconfig: Update configs for BCM63138
arm64: defconfig: enable Qualcomm Bandwidth Monitor
arm64: defconfig: Enable Allwinner built in CODECs
arm64: defconfig: Enable qcom interconnect drivers
arm64: defconfig: Enable qcom ss & hs usb phy
arm64: defconfig: enable Qualcomm LPG leds driver
arm64: defconfig: Enable gpio-fan support
arm64: defconfig: Enable DRM_V3D
ARM: configs: Enable DRM_V3D
arm64: defconfig: Enable R8A779G0 SoC
...
|
|
Pull ARM DT updates from Arnd Bergmann:
"As usual, the bulk of the changes for the SoC tree are devicetree file
updates, and most of these changes are for 64-bit embedded machines.
As before, there are a ton of style cleanups, and additional hardware
support for existing machines.
Looking only at the new SoC, the notable additions are:
- A whole family of Broadcom broadband SoCs, both 32-bit and 64-bit:
BCM63178, BCM63158, BCM4912, BCM6858, BCM6878, BCM6846, BCM63146,
BCM6856, BCM6855, BCM6756, BCM63148, and BCM6813. Each SoC comes
with a corresponding reference board.
- The new NXP i.MX93 SoC, the follow-up to the popular i.MX6 and
i.MX8 embedded SoCs, now using Cortex-A55 cores and the Ethos-U65
NPU.
- Qualcomm Snapdragon 8cx Gen3 (SC8280XP), the current high end of
Arm based Laptop SoCs, and its automotive cousin, the SA8540P. The
SC8280XP is used in the Lenovo Thinkpad X13s laptop that also gets
added here in addition to the reference boards.
- Allwinner H616, a newer version of the H6 SoC, targeted at
Set-top-box applications. It comes with dts files for the Orange Pi
zero2 single-board computer and the X96 Mate set-top-box
- Marvell Prestera 98DX2530 (AlleyCat5), a network switch chip in the
Armada SoC family based on the Cortex-A55 core.
New machines based on previously supported SoCs include:
- Several new machines on NXP i.MX platforms: multiple Toradex
Colibri boards using the "Iris" and "Ixora" carriers, DH
electronics i.MX8M Plus DHCOM and PDK2, TQ-Systems TQMa8MPQL, and
phytech phyBOARD-Polis-i.MX8MM.
- Google Chameleon v3 FPGA board based on Intel Arria10 and Stratix
10 Software Virtual platform, both in the SoCFPGA platform.
- Two new wireless devices based on Broadcom SoCs: The Asus GT-AX6000
Router and the Cisco Meraki MR26 access point
- Improved Chromebook support for both the Mediatek and Qualcomm SoC
families brought added machines: Acer Chromebook 514 (MT8192), Acer
Chromebook Spin 513 (MT8195) and a couple of SC7180 based machines
including the Lenovo IdeaPad Chromebook Duet 3.
- Xiaomi Mi Mix2s, LG G7 and LG V35 are mobile phones based on
Qualcomm SDM845, while Mi 5s Plus is based on MSM8996.
- Finally, there are a few development board on other chips: PCB8309
(Microchip lan966x), Radxa Rock Pi S (Rockchips RK3308) DH DRC
Compact (ST STM32MP1) and Inforce IFC6560 (Qualcomm SDM660)"
* tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (829 commits)
dt-bindings: soc: bcm: use absolute path to other schema
dt-bindings: soc: bcm: drop quotes when not needed
dt-bindings: soc: microchip: use absolute path to other schema
dt-bindings: soc: microchip: drop quotes when not needed
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
ARM: dts: lan966x: add support for pcb8309
dt-bindings: arm: at91: add lan966 pcb8309 board
ARM: dts: lan966x: Enable network driver on pcb8291
ARM: dts: lan966x: Disable can0 on pcb8291
ARM: dts: lan966x: Add gpio-restart
dt-bindings: arm: aspeed: add Aspeed Evaluation boards
arm64: dts: qcom: Add support for Xiaomi Mi Mix2s
dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings
dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices
dt-bindings: arm: qcom: add missing SM6350 board compatibles
dt-bindings: arm: qcom: add missing SM6125 board compatibles
dt-bindings: arm: qcom: add missing SDM845 board compatibles
dt-bindings: arm: qcom: add missing SDM636 board compatibles
dt-bindings: arm: qcom: add missing SDM630 board compatibles
dt-bindings: arm: qcom: add missing QCS404 board compatibles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC drivers from Arnd Bergmann:
"The SoC driver updates contain changes to improve support for
additional SoC variants, as well as cleanups an minor bugfixes
in a number of existing drivers.
Notable updates this time include:
- Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers
- Updates for interconnect drivers on Qualcomm Snapdragon
- A new driver support for NMI interrupts on Fujitsu A64fx
- A rework of Broadcom BCMBCA Kconfig dependencies
- Improved support for BCM2711 (Raspberry Pi 4) power management to
allow the use of the V3D GPU
- Cleanups to the NXP guts driver
- Arm SCMI firmware driver updates to add tracing support, and use
the firmware interfaces for system power control and for power
capping"
* tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits)
soc: a64fx-diag: disable modular build
dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
ARM: mach-qcom: Add support for MSM8909
dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
soc: qcom: spm: Add CPU data for MSM8909
dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
soc: qcom: rpmpd: Add compatible for MSM8909
dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
soc: qcom: smd-rpm: Add compatible for MSM8909
dt-bindings: soc: qcom: smd-rpm: Add MSM8909
soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
soc: fujitsu: Add A64FX diagnostic interrupt driver
soc: qcom: socinfo: Fix the id of SA8540P SoC
soc: qcom: Make QCOM_RPMPD depend on PM
tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"The updates for arch/arm/mach-* platform code this time are mainly
minor cleanups.
Most notably, the DaVinci DM644x/DM646x SoC support gets removed. This
was also scheduled for later removal early next year, but Linus
Walleij asked for having them removed earlier to avoid problems for
the GPIO subsystem"
* tag 'arm-soc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
ARM: at91: setup outer cache .write_sec() callback if needed
ARM: at91: add sam_linux_is_optee_available() function
ARM: Marvell: Update PCIe fixup
ARM: bcmbca: Include full family name in Kconfig
ARM: bcm: NSP: Removed forced thermal selection
ARM: debug: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
arm: bcmbca: Add BCMBCA sub platforms
arm: bcmbca: Move BCM63138 ARCH_BCM_63XX to ARCH_BCMBCA
MAINTAINERS: Move BCM63138 to bcmbca arch entry
ARM: shmobile: rcar-gen2: Increase refcount for new reference
ARM: davinci: Delete DM646x board files
ARM: davinci: Delete DM644x board files
firmware: xilinx: Add TF_A_PM_REGISTER_SGI SMC call
cpufreq: zynq: Fix refcount leak in zynq_get_revision
ARM: OMAP2+: Kconfig: Fix indentation
ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init
ARM: OMAP2+: pdata-quirks: Fix refcount leak bug
ARM: OMAP2+: display: Fix refcount leak bug
ARM: OMAP2+: Fix refcount leak in omapdss_init_of
ARM: imx25: support silicon revision 1.2
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for interrupt core and drivers:
Core:
- Fix a few inconsistencies between UP and SMP vs interrupt
affinities
- Small updates and cleanups all over the place
New drivers:
- LoongArch interrupt controller
- Renesas RZ/G2L interrupt controller
Updates:
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual"
* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Timers, timekeeping and related drivers update:
Core:
- Make wait_event_hrtimeout() aware of RT/DL tasks
New drivers:
- R-Car Gen4 timer
- Tegra186 timer
- Mediatek MT6795 CPUXGPT timer
Updates:
- Rework suspend/resume handling in timer drivers so it
takes inactive clocks into account.
- The usual device tree compatible add ons
- Small fixed and cleanups all over the place"
* tag 'timers-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
wait: Fix __wait_event_hrtimeout for RT/DL tasks
clocksource/drivers/sun5i: Remove unnecessary (void*) conversions
dt-bindings: timer: allwinner,sun4i-a10-timer: Add D1 compatible
dt-bindings: timer: ingenic,tcu: use absolute path to other schema
clocksource/drivers/sun4i: Remove unnecessary (void*) conversions
dt-bindings: timer: renesas,cmt: Fix R-Car Gen4 fall-out
clocksource/drivers/tegra186: Put Kconfig option 'tristate' to 'bool'
clocksource/drivers/timer-ti-dm: Make driver selection bool for TI K3
clocksource/drivers/timer-ti-dm: Add compatible for am6 SoCs
clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3
clocksource/drivers/timer-ti-dm: Move inline functions to driver for am6
clocksource/drivers/sh_cmt: Add R-Car Gen4 support
dt-bindings: timer: renesas,cmt: R-Car V3U is R-Car Gen4
dt-bindings: timer: renesas,cmt: Add r8a779f0 and generic Gen4 CMT support
clocksource/drivers/timer-microchip-pit64b: Fix compilation warnings
clocksource/drivers/timer-microchip-pit64b: Use mchp_pit64b_{suspend, resume}
clocksource/drivers/timer-microchip-pit64b: Remove suspend/resume ops for ce
thermal/drivers/rcar_gen3_thermal: Add r8a779f0 support
clocksource/drivers/timer-mediatek: Implement CPUXGPT timers
dt-bindings: timer: mediatek: Add CPUX System Timer and MT6795 compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Fix Intel Alder Lake PEBS memory access latency & data source
profiling info bugs.
- Use Intel large-PEBS hardware feature in more circumstances, to
reduce PMI overhead & reduce sampling data.
- Extend the lost-sample profiling output with the PERF_FORMAT_LOST ABI
variant, which tells tooling the exact number of samples lost.
- Add new IBS register bits definitions.
- AMD uncore events: Add PerfMonV2 DF (Data Fabric) enhancements.
* tag 'perf-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/ibs: Add new IBS register bits into header
perf/x86/intel: Fix PEBS data source encoding for ADL
perf/x86/intel: Fix PEBS memory access info encoding for ADL
perf/core: Add a new read format to get a number of lost samples
perf/x86/amd/uncore: Add PerfMonV2 RDPMC assignments
perf/x86/amd/uncore: Add PerfMonV2 DF event format
perf/x86/amd/uncore: Detect available DF counters
perf/x86/amd/uncore: Use attr_update for format attributes
perf/x86/amd/uncore: Use dynamic events array
x86/events/intel/ds: Enable large PEBS for PERF_SAMPLE_WEIGHT_TYPE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"This was a fairly quiet cycle for the locking subsystem:
- lockdep: Fix a handful of the more complex lockdep_init_map_*()
primitives that can lose the lock_type & cause false reports. No
such mishap was observed in the wild.
- jump_label improvements: simplify the cross-arch support of initial
NOP patching by making it arch-specific code (used on MIPS only),
and remove the s390 initial NOP patching that was superfluous"
* tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix lockdep_init_map_*() confusion
jump_label: make initial NOP patching the special case
jump_label: mips: move module NOP patching into arch code
jump_label: s390: avoid pointless initial NOP patching
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Highlights include a major rework of our kPTI page-table rewriting
code (which makes it both more maintainable and considerably faster in
the cases where it is required) as well as significant changes to our
early boot code to reduce the need for data cache maintenance and
greatly simplify the KASLR relocation dance.
Summary:
- Remove unused generic cpuidle support (replaced by PSCI version)
- Fix documentation describing the kernel virtual address space
- Handling of some new CPU errata in Arm implementations
- Rework of our exception table code in preparation for handling
machine checks (i.e. RAS errors) more gracefully
- Switch over to the generic implementation of ioremap()
- Fix lockdep tracking in NMI context
- Instrument our memory barrier macros for KCSAN
- Rework of the kPTI G->nG page-table repainting so that the MMU
remains enabled and the boot time is no longer slowed to a crawl
for systems which require the late remapping
- Enable support for direct swapping of 2MiB transparent huge-pages
on systems without MTE
- Fix handling of MTE tags with allocating new pages with HW KASAN
- Expose the SMIDR register to userspace via sysfs
- Continued rework of the stack unwinder, particularly improving the
behaviour under KASAN
- More repainting of our system register definitions to match the
architectural terminology
- Improvements to the layout of the vDSO objects
- Support for allocating additional bits of HWCAP2 and exposing
FEAT_EBF16 to userspace on CPUs that support it
- Considerable rework and optimisation of our early boot code to
reduce the need for cache maintenance and avoid jumping in and out
of the kernel when handling relocation under KASLR
- Support for disabling SVE and SME support on the kernel
command-line
- Support for the Hisilicon HNS3 PMU
- Miscellanous cleanups, trivial updates and minor fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (136 commits)
arm64: Delay initialisation of cpuinfo_arm64::reg_{zcr,smcr}
arm64: fix KASAN_INLINE
arm64/hwcap: Support FEAT_EBF16
arm64/cpufeature: Store elf_hwcaps as a bitmap rather than unsigned long
arm64/hwcap: Document allocation of upper bits of AT_HWCAP
arm64: enable THP_SWAP for arm64
arm64/mm: use GENMASK_ULL for TTBR_BADDR_MASK_52
arm64: errata: Remove AES hwcap for COMPAT tasks
arm64: numa: Don't check node against MAX_NUMNODES
drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX
perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node()
docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING
arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"
mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON
mm: kasan: Skip unpoisoning of user pages
mm: kasan: Ensure the tags are visible before the tag in page->flags
drivers/perf: hisi: add driver for HNS3 PMU
drivers/perf: hisi: Add description for HNS3 PMU driver
drivers/perf: riscv_pmu_sbi: perf format
perf/arm-cci: Use the bitmap API to allocate bitmaps
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Use RNG seed from bootinfo block on virt platform
- defconfig updates
- Minor fixes and improvements
* tag 'm68k-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v5.19-rc1
m68k: Add common forward declaration for show_registers()
m68k: mac: Remove forward declaration for mac_nmi_handler()
m68k: virt: Fix missing platform_device_unregister() on error in virt_platform_init()
m68k: virt: Use RNG seed from bootinfo block
m68k: bitops: Change __fls to return and accept unsigned long
m68k: Kconfig.machine: Add endif comment
m68k: Kconfig.debug: Replace single quotes
m68k: Kconfig.cpu: Fix indentation and add endif comments
m68k: q40: Align '*' in comments
m68k: sun3: Use __func__ to get function's name in an output message
m68k: mac: Fix typos in comments
m68k: virt: Kconfig minor fixes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 kdump updates from Borislav Petkov:
- Add the ability to pass early an RNG seed to the kernel from the boot
loader
- Add the ability to pass the IMA measurement of kernel and bootloader
to the kexec-ed kernel
* tag 'x86_kdump_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/setup: Use rng seeds from setup_data
x86/kexec: Carry forward IMA measurement log on kexec
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Borislav Petkov:
- Fix stack protector builds when cross compiling with Clang
- Other Kbuild improvements and fixes
* tag 'x86_build_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Omit use of bin2c
x86/purgatory: Hard-code obj-y in Makefile
x86/build: Remove unused OBJECT_FILES_NON_STANDARD_test_nx.o
x86/Kconfig: Fix CONFIG_CC_HAS_SANE_STACKPROTECTOR when cross compiling with clang
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Have invalid MSR accesses warnings appear only once after a
pr_warn_once() change broke that
- Simplify {JMP,CALL}_NOSPEC and let the objtool retpoline patching
infra take care of them instead of having unreadable alternative
macros there
* tag 'x86_core_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Fix ex_handler_msr() print condition
x86,nospec: Simplify {JMP,CALL}_NOSPEC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- Add a bunch of PCI IDs for new AMD CPUs and use them in k10temp
- Free the pmem platform device on the registration error path
* tag 'x86_misc_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hwmon: (k10temp): Add support for new family 17h and 19h models
x86/amd_nb: Add AMD PCI IDs for SMN communication
x86/pmem: Fix platform-device leak in error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Remove the vendor check when selecting MWAIT as the default idle
state
- Respect idle=nomwait when supplied on the kernel cmdline
- Two small cleanups
* tag 'x86_cpu_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Use MSR_IA32_MISC_ENABLE constants
x86: Fix comment for X86_FEATURE_ZEN
x86: Remove vendor checks from prefer_mwait_c1_over_halt
x86: Handle idle=nomwait cmdline properly for x86_idle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu update from Borislav Petkov:
- Add machinery to initialize AMX register state in order for
AMX-capable CPUs to be able to enter deeper low-power state
* tag 'x86_fpu_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Add a new flag to initialize the AMX state
x86/fpu: Add a helper to prepare AMX state for low-power CPU idle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Borislav Petkov:
- Rename a PKRU macro to make more sense when reading the code
- Update pkeys documentation
- Avoid reading contended mm's TLB generation var if not absolutely
necessary along with fixing a case where arch_tlbbatch_flush()
doesn't adhere to the generation scheme and thus violates the
conditions for the above avoidance.
* tag 'x86_mm_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/tlb: Ignore f->new_tlb_gen when zero
x86/pkeys: Clarify PKRU_AD_KEY macro
Documentation/protection-keys: Clean up documentation for User Space pkeys
x86/mm/tlb: Avoid reading mm_tlb_gen when possible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanup from Borislav Petkov:
- A single CONFIG_ symbol correction in a comment
* tag 'x86_cleanups_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Refer to the intended config STRICT_DEVMEM in a comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vmware cleanup from Borislav Petkov:
- A single statement simplification by using the BIT() macro
* tag 'x86_vmware_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmware: Use BIT() macro for shifting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS update from Borislav Petkov:
"A single RAS change:
- Probe whether hardware error injection (direct MSR writes) is
possible when injecting errors on AMD platforms. In some cases, the
platform could prohibit those"
* tag 'ras_core_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Check whether writes to MCA_STATUS are getting ignored
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Update the 'mitigations=' kernel param documentation
- Check the IBPB feature flag before enabling IBPB in firmware calls
because cloud vendors' fantasy when it comes to creating guest
configurations is unlimited
- Unexport sev_es_ghcb_hv_call() before 5.19 releases now that HyperV
doesn't need it anymore
- Remove dead CONFIG_* items
* tag 'x86_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
docs/kernel-parameters: Update descriptions for "mitigations=" param with retbleed
x86/bugs: Do not enable IBPB at firmware entry when IBPB is not available
Revert "x86/sev: Expose sev_es_ghcb_hv_call() for use by HyperV"
x86/configs: Update configs in x86_debug.config
|
|
Pull ARM fixes from Russell King:
"Last set of ARM fixes for 5.19:
- fix for MAX_DMA_ADDRESS overflow
- fix for find_*_bit performing an out of bounds memory access"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: findbit: fix overflowing offset
ARM: 9216/1: Fix MAX_DMA_ADDRESS overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"A build fix for 'make vdso_install' that avoids an issue trying to
install the compat VDSO"
* tag 'riscv-for-linus-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: compat: vdso: Fix vdso_install target
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- Fix cache size calculation, stack protection attributes, ptrace's
fpr_set and "ROM Size" in boardinfo
- Some cleanups and improvements of assembly
- Some cleanups of unused code and useless code
* tag 'loongarch-fixes-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Fix wrong "ROM Size" of boardinfo
LoongArch: Fix missing fcsr in ptrace's fpr_set
LoongArch: Fix shared cache size calculation
LoongArch: Disable executable stack by default
LoongArch: Remove unused variables
LoongArch: Remove clock setting during cpu hotplug stage
LoongArch: Remove useless header compiler.h
LoongArch: Remove several syntactic sugar macros for branches
LoongArch: Re-tab the assembly files
LoongArch: Simplify "BGT foo, zero" with BGTZ
LoongArch: Simplify "BLT foo, zero" with BLTZ
LoongArch: Simplify "BEQ/BNE foo, zero" with BEQZ/BNEZ
LoongArch: Use the "move" pseudo-instruction where applicable
LoongArch: Use the "jr" pseudo-instruction where applicable
LoongArch: Use ABI names of registers where appropriate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Re-enable the new amdgpu display engine for powerpc, as long as the
compiler is correctly configured.
- Disable stack variable initialisation in prom_init to fix GCC 12
allmodconfig.
Thanks to Dan Horák and Sudip Mukherjee.
* tag 'powerpc-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
drm/amdgpu: Re-enable DCN for 64-bit powerpc
powerpc/64s: Disable stack variable initialisation for prom_init
|
|
We can see the "ROM Size" is different in the following outputs:
[root@linux loongson]# cat /sys/firmware/loongson/boardinfo
BIOS Information
Vendor : Loongson
Version : vUDK2018-LoongArch-V2.0.pre-beta8
ROM Size : 63 KB
Release Date : 06/15/2022
Board Information
Manufacturer : Loongson
Board Name : Loongson-LS3A5000-7A1000-1w-A2101
Family : LOONGSON64
[root@linux loongson]# dmidecode | head -11
...
Handle 0x0000, DMI type 0, 26 bytes
BIOS Information
Vendor: Loongson
Version: vUDK2018-LoongArch-V2.0.pre-beta8
Release Date: 06/15/2022
ROM Size: 4 MB
According to "BIOS Information (Type 0) structure" in the SMBIOS
Reference Specification [1], it shows 64K * (n+1) is the size of
the physical device containing the BIOS if the size is less than
16M.
Additionally, we can see the related code in dmidecode [2]:
u64 s = { .l = (code1 + 1) << 6 };
So the output of dmidecode is correct, the output of boardinfo
is wrong, fix it.
By the way, at present no need to consider the size is 16M or
greater on LoongArch, because it is usually 4M or 8M which is
enough to use.
[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
[2] https://git.savannah.nongnu.org/cgit/dmidecode.git/tree/dmidecode.c#n347
Fixes: 628c3bb40e9a ("LoongArch: Add boot and setup routines")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In file ptrace.c, function fpr_set does not copy fcsr data from ubuf
to kbuf. That's the reason why fcsr cannot be modified by ptrace.
This patch fixs this problem and allows users using ptrace to modify
the fcsr.
Co-developed-by: Xu Li <lixu@loongson.cn>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Current calculation of shared cache size is from the node (die) scope,
but we hope 'lscpu' to show the shared cache size of the whole package
for multi-die chips (e.g., Loongson-3C5000L, which contains 4 dies in
one package). So fix it by multiplying nodes_per_package.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Disable executable stack for LoongArch by default, as all modern
architectures do.
Reported-by: Andreas Schwab <schwab@suse.de>
Suggested-by: WANG Xuerui <git@xen0n.name>
Link: https://sourceware.org/pipermail/binutils/2022-July/121992.html
Tested-by: WANG Xuerui <git@xen0n.name>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
There are some variables never used or referenced, this patch
removes these varaibles and make the code cleaner.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On physical machine we can save power by disabling clock of hot removed
cpu. However as different platforms require different methods to
configure clocks, the code is platform-specific, and probably belongs to
firmware/pmu or cpu regulator, rather than generic arch/loongarch code.
Also, there is no such register on QEMU virt machine since the
clock/frequency regulation is not emulated.
This patch removes the hard-coded clock register accesses in generic
LoongArch cpu hotplug flow.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The content of LoongArch's compiler.h is trivial, with some unused
anywhere, so inline the definitions and remove the header.
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
These syntactic sugars have been supported by upstream binutils from the
beginning, so no need to patch them locally.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Reflow the *.S files for better stylistic consistency, namely hard tabs
after mnemonic position, and vertical alignment of the first operand
with hard tabs. Tab width is obviously 8. Some pre-existing intra-block
vertical alignments are preserved.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Support for the syntactic sugar is present in upstream binutils port
from the beginning. Use it for shorter lines and better consistency.
Generated code should be identical.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Support for the syntactic sugar is present in upstream binutils port
from the beginning. Use it for shorter lines and better consistency.
Generated code should be identical.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
While B{EQ,NE}Z and B{EQ,NE} are different instructions, and the vastly
expanded range for branch destination does not really matter in the few
cases touched, use the B{EQ,NE}Z where possible for shorter lines and
better consistency (e.g. some places used "BEQ foo, zero", while some
used "BEQ zero, foo").
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some of the assembly code in the LoongArch port likely originated
from a time when the assembler did not support pseudo-instructions like
"move" or "jr", so the desugared form was used and readability suffers
(to a minor degree) as a result.
As the upstream toolchain supports these pseudo-instructions from the
beginning, migrate the existing few usages to them for better
readability.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some of the assembly code in the LoongArch port likely originated
from a time when the assembler did not support pseudo-instructions like
"move" or "jr", so the desugared form was used and readability suffers
(to a minor degree) as a result.
As the upstream toolchain supports these pseudo-instructions from the
beginning, migrate the existing few usages to them for better
readability.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some of the assembly in the LoongArch port seem to come from a
prehistoric time, when the assembler didn't even have support for the
ABI names we all come to know and love, thus used raw register numbers
which hampered readability.
The usages are found with a regex match inside arch/loongarch, then
manually adjusted for those non-definitions.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When offset is larger than the size of the bit array, we should not
attempt to access the array as we can perform an access beyond the
end of the array. Fix this by changing the pre-condition.
Using "cmp r2, r1; bhs ..." covers us for the size == 0 case, since
this will always take the branch when r1 is zero, irrespective of
the value of r2. This means we can fix this bug without adding any
additional code!
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Some cloud hypervisors do not provide IBPB on very recent CPU processors,
including AMD processors affected by Retbleed.
Using IBPB before firmware calls on such systems would cause a GPF at boot
like the one below. Do not enable such calls when IBPB support is not
present.
EFI Variables Facility v0.08 2004-May-17
general protection fault, maybe for address 0x1: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 24 Comm: kworker/u2:1 Not tainted 5.19.0-rc8+ #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Workqueue: efi_rts_wq efi_call_rts
RIP: 0010:efi_call_rts
Code: e8 37 33 58 ff 41 bf 48 00 00 00 49 89 c0 44 89 f9 48 83 c8 01 4c 89 c2 48 c1 ea 20 66 90 b9 49 00 00 00 b8 01 00 00 00 31 d2 <0f> 30 e8 7b 9f 5d ff e8 f6 f8 ff ff 4c 89 f1 4c 89 ea 4c 89 e6 48
RSP: 0018:ffffb373800d7e38 EFLAGS: 00010246
RAX: 0000000000000001 RBX: 0000000000000006 RCX: 0000000000000049
RDX: 0000000000000000 RSI: ffff94fbc19d8fe0 RDI: ffff94fbc1b2b300
RBP: ffffb373800d7e70 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000000b R11: 000000000000000b R12: ffffb3738001fd78
R13: ffff94fbc2fcfc00 R14: ffffb3738001fd80 R15: 0000000000000048
FS: 0000000000000000(0000) GS:ffff94fc3da00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff94fc30201000 CR3: 000000006f610000 CR4: 00000000000406f0
Call Trace:
<TASK>
? __wake_up
process_one_work
worker_thread
? rescuer_thread
kthread
? kthread_complete_and_exit
ret_from_fork
</TASK>
Modules linked in:
Fixes: 28a99e95f55c ("x86/amd: Use IBPB for firmware calls")
Reported-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220728122602.2500509-1-cascardo@canonical.com
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clockevent/source updates from Daniel Lezcano:
- Add the missing DT bindings for the MTU nomadik timer (Linus
Walleij)
- Fix grammar typo in the ARM global timer Kconfig option (Randy
Dunlap)
- Add the tegra186 timer and use it on the tegra234 board (Thierry
Reding)
- Add the 'CPUXGPT' CPU timer for Mediatek MT6795 and implement a
workaround to overcome an ATF bug where the timer is not correctly
initialized (AngeloGioacchino Del Regno)
- Rework the suspend/resume approach to enable the feature on the
timer even it is not an active clock and fix a compilation warning
(Claudiu Beznea)
- Add the Add R-Car Gen4 timer support along with the DT bindings
(Wolfram Sang)
- Add compatible for ti,am654-timer to support AM6 SoC (Tony Lindgren)
- Fix Kconfig option to put it back to 'bool' instead of 'tristate'
for the tegra186 (Daniel Lezcano)
- Sort 'family,type' DT bindings for the Renesas timers (Geert
Uytterhoeven)
- Add compatible 'allwinner,sun20i-d1-timer' for Allwinner D1 (Samuel
Holland)
- Remove unnecessary (void*) conversions for sun4i (XU pengfei)
- Remove unnecessary (void*) conversions for sun5i (Li zeming)
Link: https://lore.kernel.org/all/7472984e-f502-5f27-82bf-070127dd85a5@linaro.org
|
|
Commit 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis")
added a check to determine whether arm_dma_zone_size is exceeding the
amount of kernel virtual address space available between the upper 4GB
virtual address limit and PAGE_OFFSET in order to provide a suitable
definition of MAX_DMA_ADDRESS that should fit within the 32-bit virtual
address space. The quantity used for comparison was off by a missing
trailing 0, leading to MAX_DMA_ADDRESS to be overflowing a 32-bit
quantity.
This was caught thanks to CONFIG_DEBUG_VIRTUAL on the bcm2711 platform
where we define a dma_zone_size of 1GB and we have a PAGE_OFFSET value
of 0xc000_0000 (CONFIG_VMSPLIT_3G) leading to MAX_DMA_ADDRESS being
0x1_0000_0000 which overflows the unsigned long type used throughout
__pa() and then __virt_addr_valid(). Because the virtual address passed
to __virt_addr_valid() would now be 0, the function would loudly warn
and flood the kernel log, thus making the platform unable to boot
properly.
Fixes: 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"One last set of changes for the soc tree:
- fix clock frequency on lan966x
- fix incorrect GPIO numbers on some pxa machines
- update Baolin's email address"
* tag 'soc-fixes-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa2xx: Fix GPIO descriptor tables
mailmap: update Baolin Wang's email
ARM: dts: lan966x: fix sys_clk frequency
|
|
This reverts commit 007faec014cb5d26983c1f86fd08c6539b41392e.
Now that hyperv does its own protocol negotiation:
49d6a3c062a1 ("x86/Hyper-V: Add SEV negotiate protocol support in Isolation VM")
revert this exposure of the sev_es_ghcb_hv_call() helper.
Cc: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by：Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/20220614014553.1915929-1-ltykernel@gmail.com
|
|
Let's make timer-ti-dm selectable for ARCH_K3, and add a separate option
for OMAP_DM_SYSTIMER as there should be no need for it on ARCH_K3.
For older TI SoCs, we are already selecting OMAP_DM_TIMER in
arch/arm/mach-omap*/Kconfig. For mach-omap2, we need to now also select
OMAP_DM_SYSTIMER.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220408101715.43697-3-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v5.20 #4
It contains one new LAN966 based board, namely pcb8309, a cleanup
on Makefile to sort alphabetically LAN966 entries and 2 cleanups
on bindings.
* tag 'at91-dt-5.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: soc: microchip: use absolute path to other schema
dt-bindings: soc: microchip: drop quotes when not needed
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
ARM: dts: lan966x: add support for pcb8309
dt-bindings: arm: at91: add lan966 pcb8309 board
Link: https://lore.kernel.org/r/20220727075749.2445000-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
