summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-07-25ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configuredTony Lindgren1-0/+40
[ Upstream commit 093a474ce10d8ea3db3ef2922aca5a38f34bab1b ] If the PM related modules are not loaded and PM firmware not configured, the system suspend fails to resume. Let's fix this by adding initial platform_suspend_ops to block suspend and warn about missing modules. When pm33xx and wkup_m3_ipc have been loaded and m3 coprocessor booted with it's firmware, pm33xx sets up working platform_suspend_ops. Note that we need to configure at least PM_SUSPEND_STANDBY to have suspend_set_ops(). Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: qcom: sc7180: Add wakeup delay for adau codecSrinivasa Rao Mandadapu1-0/+1
[ Upstream commit ba5f9b5d7ff3452e69275080c3d59265bc1db8ea ] Add wakeup delay for fixing PoP noise during capture begin. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/20210513122429.25295-1-srivasam@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix stpmic node for stm32mp1 boardsAlexandre Torgue4-18/+6
[ Upstream commit 4bf4abe19089245b7b12f35e5cafb5477b3e2c48 ] On some STM32 MP15 boards, stpmic node is not correct which generates warnings running "make dtbs_check W=1" command. Issues are: -"regulator-active-discharge" is not a boolean but an uint32. -"regulator-over-current-protection" is not a valid entry for vref_ddr. -LDO4 has a fixed voltage (3v3) so min/max entries are not allowed. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoMMarek Vasut2-2/+2
[ Upstream commit 9b8a9b389d8464e1ca5a4e92c6a4422844ad4ef3 ] Fix the following dtbs_check warning: spi-flash@0: $nodename:0: 'spi-flash@0' does not match '^flash(@.*)?$' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoMMarek Vasut1-1/+1
[ Upstream commit b586250df24226f8a257e11e1f5953054c54fd35 ] Fix the following dtbs_check warning: eth@1,0: $nodename:0: 'eth@1,0' does not match '^ethernet(@.*)?$' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoMMarek Vasut1-1/+0
[ Upstream commit 5247a50c8b53ca214a488da648e1bb35c35c2597 ] Fix the following dtbs_check warning: touchscreen@38: 'linux,wakeup' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supplyGrzegorz Szymaszek1-1/+1
[ Upstream commit f493162319788802b6a49634f7268e691b4c10ec ] The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC supply set to v3v3 (buck4), the same as the VMMC supply. That was incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3) instead. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7Alexandre Torgue1-1/+1
[ Upstream commit 11aaf2a0f8f070e87833775965950157bf57e49a ] It prevents the following warning: pin-controller@50002000: 'ltdc' does not match any of the regexes: '-[0-9]*$', '^gpio@[0-9a-f]*$', 'pinctrl-[0-9]+' Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15Alexandre Torgue1-6/+6
[ Upstream commit fb1406335c067be074eab38206cf9abfdce2fb0b ] It fixes the following warning seen running "make dtbs_check W=1" Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty reg/ranges property Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warningsAlexandre Torgue1-2/+2
[ Upstream commit ad0ed10ba5792064fc3accbf8f0341152a57eecb ] Replace upper case by lower case in i2c nodes name. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: fix supply properties in io-domains nodesJohan Jonker2-3/+3
[ Upstream commit f07edc41220b14ce057a4e6d7161b30688ddb8a2 ] A test with rockchip-io-domain.yaml gives notifications for supply properties in io-domains nodes. Fix them all into ".*-supply$" format. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210606181632.13371-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: juno: Update SCPI nodes as per the YAML schemaSudeep Holla1-3/+3
[ Upstream commit 70010556b158a0fefe43415fb0c58347dcce7da0 ] The SCPI YAML schema expects standard node names for clocks and power domain controllers. Fix those as per the schema for Juno platforms. Link: https://lore.kernel.org/r/20210608145133.2088631-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: bcm283x: Fix up GPIO LED node namesStefan Wahren15-21/+21
[ Upstream commit 5f30dacf37bc93308e91e4d0fc94681ca73f0f91 ] Fix the node names for the GPIO LEDs to conform to the standard node name led-.. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-6-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: bcm283x: Fix up MMC node namesStefan Wahren2-2/+2
[ Upstream commit f230c32349eb0a43a012a81c08a7f13859b86cbb ] Fix the node names for the MMC/SD card controller to conform to the standard node name mmc@.. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-2-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: aspeed: Everest: Fix cable card PCA chipsSantosh Puranik1-85/+83
[ Upstream commit 010da3daf9278ed03d38b7dcb0422f1a7df1bdd3 ] Correct two PCA chips which were placed on the wrong I2C bus and address. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warningsAlexandre Torgue3-20/+0
[ Upstream commit 2388f14d8747f8304e26ee870790e188c9431efd ] Prevent warning seen with "make dtbs_check W=1" command: Warning (avoid_unnecessary_addr_size): /soc/timers@40001c00: unnecessary address-cells/size-cells without "ranges" or child "reg" property Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix RCC node name on stm32f429 MCUAlexandre Torgue1-1/+1
[ Upstream commit e4b948415a89a219d13e454011cdcf9e63ecc529 ] This prevent warning observed with "make dtbs_check W=1" Warning (simple_bus_reg): /soc/rcc@40023810: simple-bus unit address format error, expected "40023800" Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix gpio-keys node on STM32 MCU boardsAlexandre Torgue5-21/+11
[ Upstream commit bf24b91f4baf7e421c770a1d9c7d381b10206ac9 ] Fix following warning observed with "make dtbs_check W=1" command. It concerns f429 eval and disco boards, f769 disco board. Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name, but no reg or ranges property Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix stm32mp157c-odyssey card detect pinGrzegorz Szymaszek1-1/+1
[ Upstream commit 0171b07373cc8c2815ca5fa79a7308fdefa54ca4 ] The microSD card detect pin is physically connected to the MPU pin PI3. The Device Tree configuration of the card detect pin was wrong—it was set to pin PB7 instead. If such configuration was used, the kernel would hang on “Waiting for root device” when booting from a microSD card. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2Marek Vasut1-2/+2
[ Upstream commit 4b5fadef3fc2ab8863ffdf31eed6a745b1bf6e61 ] Fix make dtbs_check warning: arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml:0:0: /soc/i2c@40015000/polytouch@38: failed to match any schema with compatible: ['edt,edt-ft5x06'] Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2Marek Vasut1-2/+0
[ Upstream commit 28b9a4679d8074512f12967497c161b992eb3b75 ] Fix make dtbs_check warning: arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys-polled: '#address-cells' is a dependency of '#size-cells' arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys: '#address-cells' is a dependency of '#size-cells' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: qcom: sc7180: Move rmtfs memory regionSujit Kautkar1-1/+1
[ Upstream commit d4282fb4f8f9683711ae6c076da16aa8e675fdbd ] Move rmtfs memory region so that it does not overlap with system RAM (kernel data) when KAsan is enabled. This puts rmtfs right after mba_mem which is not supposed to increase beyond 0x94600000 Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Sujit Kautkar <sujitka@chromium.org> Link: https://lore.kernel.org/r/20210514113430.1.Ic2d032cd80424af229bb95e2c67dd4de1a70cb0c@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: qcom: sm8250: fix display nodesJonathan Marek1-2/+2
[ Upstream commit dc5d91250ae6b810bc8d599d8d6590a06a4ce84a ] Use sm8250 compatibles instead of sdm845 compatibles Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210329120051.3401567-5-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: qcom: sm8350: fix the node unit addressesVinod Koul1-3/+3
[ Upstream commit 1dee9e3b0997fef7170f7ea2d8eab47d0cd334d8 ] Some node unit addresses were put wrongly in the dts, resulting in below warning when run with W=1 arch/arm64/boot/dts/qcom/sm8350.dtsi:693.34-702.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c222000: simple-bus unit address format error, expected "c263000" arch/arm64/boot/dts/qcom/sm8350.dtsi:704.34-713.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c223000: simple-bus unit address format error, expected "c265000" arch/arm64/boot/dts/qcom/sm8350.dtsi:1180.32-1185.5: Warning (simple_bus_reg): /soc@0/interconnect@90e0000: simple-bus unit address format error, expected "90c0000" Fix by correcting to the correct address as given in reg node Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210513060733.382420-1-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variantDmitry Osipenko1-1/+1
[ Upstream commit c4dd6066bc304649e3159f1c7a08ece25d537e00 ] The 3v3 regulator GPIO is GP6 and not GP7, which is the DDR regulator. Both regulators are always-on, nevertheless the DT model needs to be corrected, fix it. Reported-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-treesDmitry Osipenko8-8/+8
[ Upstream commit 5f45da704de425d74abd75feaa928fc8a3df03ba ] All Tegra boards which use WM8903 audio codec are specifying a wrong polarity for the headphones detection GPIO. The kernel driver hardcodes the polarity to active-low, which is the correct polarity, so we can fix the device-trees safely. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC ↵Grygorii Strashko3-3/+3
direction [ Upstream commit 69db725cdb2b803af67897a08ea54467d11f6020 ] The MCU RGMII MCU_RGMII1_TXC pin is defined as input by mistake, although this does not make any difference functionality wise it's better to update to avoid confusion. Hence fix MCU RGMII MCU_RGMII1_TXC pin pinmux definitions to be an output in K3 am654x/j721e/j7200 board files. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20210526132041.6104-1-grygorii.strashko@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: tegra: Add PMU node for Tegra194Jon Hunter1-0/+14
[ Upstream commit 9e79e58f330ea4860f2ced65a8a35dfb05fc03c1 ] Populate the device-tree node for the PMU device on Tegra194. This also fixes the following warning that is observed on booting Tegra194. ERR KERN kvm: pmu event creation failed -2 Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: OMAP2+: Replace underscores in sub-mailbox node namesSuman Anna8-20/+20
[ Upstream commit 9e7f5ee1137397def6580461e27e5efcb68183ee ] A number of sub-mailbox node names in various OMAP2+ dts files are currently using underscores. This is not adhering to the node name convention, fix all of these to use hiphens. These nodes are already using the prefix mbox, so they will be in compliance with the sub-mailbox node name convention being added in the OMAP Mailbox YAML binding as well. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: am335x: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko5-6/+6
[ Upstream commit d7d30b8fcd111e9feb171023c0e0c8d855582dcb ] The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko2-2/+5
[ Upstream commit 2566d5b8c1670f7d7a44cc1426d254147ec5c421 ] The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko2-5/+4
[ Upstream commit b644c5e01c870056e13a096e14b9a92075c8f682 ] The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: renesas: beacon: Fix USB ref clock referencesAdam Ford1-2/+2
[ Upstream commit ebc666f39ff67a01e748c34d670ddf05a9e45220 ] The RZ/G2 boards expect there to be an external clock reference for USB2 EHCI controllers. For the Beacon boards, this reference clock is controlled by a programmable versaclock. Because the RZ/G2 family has a special clock driver when using an external clock, the third clock reference in the EHCI node needs to point to this special clock, called usb2_clksel. Since the usb2_clksel does not keep the usb_extal clock enabled, the 4th clock entry for the EHCI nodes needs to reference it to keep the clock running and make USB functional. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20210513114617.30191-2-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: renesas: beacon: Fix USB extal referenceAdam Ford1-2/+4
[ Upstream commit 56bc54496f5d6bc638127bfc9df3742cbf0039e7 ] The USB extal clock reference isn't associated to a crystal, it's associated to a programmable clock, so remove the extal reference, add the usb2_clksel. Since usb_extal is referenced by the versaclock, reference it here so the usb2_clksel can get the proper clock speed of 50MHz. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20210513114617.30191-1-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: ux500: Fix orientation of Janice accelerometerLinus Walleij1-4/+3
[ Upstream commit e409c1e1d5cb164361229e3a3f084e4a32544fb6 ] This fixes up the axis on the Janice accelerometer to give the right orientation according to tests. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE valueOleksij Rempel1-0/+2
[ Upstream commit 723de6a4126b2474a8106e943749e1554012dad6 ] Without SoC specific PHY fixups the network interface on this board will fail to work. Provide missing DT properties to make it work again. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: ux500: Fix some compatible stringsLinus Walleij3-4/+6
[ Upstream commit 59ba546d1662c4beb738725965041f350afe24b4 ] The Golden and Skomer phones have BCM4334 WLAN+BT chips, so make the compatible strings reflect the new available bindings for these. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: ux500: Fix orientation of accelerometerLinus Walleij1-0/+3
[ Upstream commit 4beba4011995a2c44ee27e1d358dc32e6b9211b3 ] This adds a mounting matrix to the accelerometer on the TVK1281618 R3. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: ux500: Rename gpio-controller nodeSebastian Reichel5-5/+5
[ Upstream commit 4917b702818872fdf2a9973705af3aa7d3d1f19e ] Rename the AB8500 gpio controller node from ab8500-gpio to ab8500-gpiocontroller, since -gpio is a common suffix for gpio consumers. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: ux500: Fix interrupt cellsSebastian Reichel2-24/+24
[ Upstream commit e4ff0112a03c2e353c8457cd33c88feb89dfec41 ] Fix interrupt cells in DT AB8500/AB8505 source files. The compiled DTB files will stay the same. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: rockchip: fix regulator-gpio states arrayJohan Jonker5-9/+9
[ Upstream commit b82f8e2992534aab0fa762a37376be30df263701 ] A test with the command below gives this error: /arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml: sdmmcio-regulator: states:0: [1800000, 1, 3300000, 0] is too long dtbs_check expects regulator-gpio states in a format of 2 per item, so fix them all. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/ regulator/gpio-regulator.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210510215840.16270-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_infoJonathan Neuschäfer1-2/+2
[ Upstream commit 89b759469d525f4d5f9c29cd3b1f490311c67f85 ] The name of the struct, as defined in arch/arm/mach-imx/pm-imx5.c, is imx5_cpu_suspend_info. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: imx6: phyFLEX: Fix UART hardware flow controlPrimoz Fiser1-2/+3
[ Upstream commit 14cdc1f243d79e0b46be150502b7dba9c5a6bdfd ] Serial interface uart3 on phyFLEX board is capable of 5-wire connection including signals RTS and CTS for hardware flow control. Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add missing property "uart-has-rtscts" to allow serial interface to be configured and used with the hardware flow control. Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: BCM5301X: Fix pinmux subnodes namesRafał Miłecki2-4/+4
[ Upstream commit bb95d7d440fefd104c593d9cb20da6d34a474e97 ] This matches pinmux-node.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: Hurricane 2: Fix NAND nodes namesRafał Miłecki1-1/+1
[ Upstream commit a4528d9029e2eda16e4fc9b9da1de1fbec10ab26 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: BCM63xx: Fix NAND nodes namesRafał Miłecki2-3/+3
[ Upstream commit 75e2f012f6e34b93124d1d86eaa8f27df48e9ea0 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: NSP: dts: fix NAND nodes namesRafał Miłecki9-17/+17
[ Upstream commit 0484594be733d5cdf976f55a2d4e8d887f351b69 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: Cygnus: dts: fix NAND nodes namesRafał Miłecki4-7/+7
[ Upstream commit e256b48a3b07ee1ae4bfa60abbf509ba8e386862 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: brcmstb: dts: fix NAND nodes namesRafał Miłecki2-3/+3
[ Upstream commit 9a800ce1aada6e0f56b78e4713f4858c8990c1f7 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: BCM5301X: Fix NAND nodes namesRafał Miłecki6-10/+10
[ Upstream commit b660269cba748dfd07eb5551a88ff34d5ea0b86e ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-21 15:43:59 +0300