summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2012-04-23Merge 3.4-rc4 into tty-nextGreg Kroah-Hartman6-9/+9
This resolves the merge problem with: drivers/tty/serial/pch_uart.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-22sparc32,leon: add notify_cpu_starting()Yong Zhang1-0/+3
Otherwise cpu_active_mask will not set, which lead to other issue. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Konrad Eisele <konrad@gaisler.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21Merge tag 'fixes-for-linus' of ↵Linus Torvalds24-147/+67
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: SoC fixes" from Olof Johansson: * at91, ux500, imx, omap and bcmring: - at91 fixes for =m driver build issues, irqdomain fixes and config dependency fixes - ux500 kconfig dependency fixes and a smp wakeup bugfix - imx idle bugfix and build fix due to irq domain changes - omap uart pinmux fixes, softreset regression revert and misc fixes - bcmring build error regression fix * ux500 and imx had some small defconfig updates in this branch * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: bcmring: fix UART declarations ARM: imx: Fix imx5 idle logic bug ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple() ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE ARM: OMAP1: DMTIMER: fix broken timer clock source selection ARM: OMAP: serial: Fix the ocp smart idlemode handling bug ARM: OMAP2+: UART: Fix incorrect population of default uart pads ARM: OMAP: sram: fix BUG in dpll code for !PM case dmaengine: Kconfig: fix Atmel at_hdmac entry USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt USB: ohci-at91: change annotations for probe/remove functions leds-atmel-pwm.c: Make pwmled_probe() __devinit ARM: at91: fix at91sam9261ek Ethernet dm9000 irq ARM: at91: fix rm9200ek flash size ARM: at91: remove empty at91_init_serial function ARM: at91: fix typo in at91_pmc_base assembly declaration ARM: at91: Export at91_matrix_base ARM: at91: Export at91_pmc_base ARM: at91: Export at91_ramc_base ARM: at91: Export at91_st_base ...
2012-04-21Merge tag 'mfd-for-linus-3.4' of ↵Linus Torvalds5-25/+49
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD fixes from Samuel Ortiz: "We have 3 build fixes, a OMAP USB host PHY reset fix and the twl6040 conversion to an i2c driver. The latter may not sound like a fix but the twl6040 MFD driver won't probe without it, triggering an OMAP4 audio regression." * tag 'mfd-for-linus-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fix modular builds of rc5t583 regulator support mfd: Fix asic3_gpio_to_irq ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue mfd: Convert twl6040 to i2c driver, and separate it from twl core mfd : Fix dbx500 compilation error
2012-04-21kill mm argument of vm_munmap()Al Viro3-3/+3
it's always current->mm Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-21perfmon: kill some helpers and argumentsAl Viro1-9/+4
pfm_vm_munmap() is simply vm_munmap() and pfm_remove_smpl_mapping() always get current as the first argument. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-21VM: add "vm_mmap()" helper functionLinus Torvalds3-15/+5
This continues the theme started with vm_brk() and vm_munmap(): vm_mmap() does the same thing as do_mmap(), but additionally does the required VM locking. This uninlines (and rewrites it to be clearer) do_mmap(), which sadly duplicates it in mm/mmap.c and mm/nommu.c. But that way we don't have to export our internal do_mmap_pgoff() function. Some day we hopefully don't have to export do_mmap() either, if all modular users can become the simpler vm_mmap() instead. We're actually very close to that already, with the notable exception of the (broken) use in i810, and a couple of stragglers in binfmt_elf. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-21VM: add "vm_munmap()" helper functionLinus Torvalds3-17/+5
Like the vm_brk() function, this is the same as "do_munmap()", except it does the VM locking for the caller. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-21VM: add "vm_brk()" helper functionLinus Torvalds1-15/+5
It does the same thing as "do_brk()", except it handles the VM locking too. It turns out that all external callers want that anyway, so we can make do_brk() static to just mm/mmap.c while at it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-20Merge branch 'for-linus' of ↵Linus Torvalds6-18/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68k arch fixes from Greg Ungerer: "This contains four fixes for 3.4. Two fix and clean up compilation for the nommu 68x328 CPU targets. The other two fix the platform definition and multi-function pin setup of the second eth interface on the ColdFire 5275 SoC." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: make sure 2nd FEC eth interface pins are enabled on 5275 ColdFire m68knommu: fix id number for second eth device on 5275 ColdFire m68knommu: move and fix the 68VZ328 platform bootlogo.h m68knommu: remove the unused bootlogo.h processing for 68EZ328 and 68VZ328
2012-04-19Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-10/+13
Pull KVM updates from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: lock slots_lock around device assignment KVM: VMX: Fix kvm_set_shared_msr() called in preemptible context KVM: unmap pages from the iommu when slots are removed KVM: PMU emulation: GLOBAL_CTRL MSR should be enabled on reset
2012-04-19Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson7-5/+10
Here is another fixes series for AT91 designed for 3.4-rc. We experienced some issues while compiling some drivers as modules: Joachim has corrected several of them. We may reduce this number of exported values by reworking some drivers, in the future. Some drivers are also modified here, I would like to keep them in the series as the modifications are really related with our recent move to irqdomains or simply related with compiler annotations. I keep dmaengine Kconfig modification in this "fixes" series. The DMA driver will not be available for 9x5 SoC family otherwise. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: dmaengine: Kconfig: fix Atmel at_hdmac entry USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt USB: ohci-at91: change annotations for probe/remove functions leds-atmel-pwm.c: Make pwmled_probe() __devinit ARM: at91: fix at91sam9261ek Ethernet dm9000 irq ARM: at91: fix rm9200ek flash size ARM: at91: remove empty at91_init_serial function ARM: at91: fix typo in at91_pmc_base assembly declaration ARM: at91: Export at91_matrix_base ARM: at91: Export at91_pmc_base ARM: at91: Export at91_ramc_base ARM: at91: Export at91_st_base
2012-04-19Merge branch 'fixes-for-arm-soc-20120416' of ↵Olof Johansson3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes * 'fixes-for-arm-soc-20120416' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: update defconfig ARM: ux500: Fix unmet direct dependency ARM: ux500: wake secondary cpu via resched
2012-04-19Merge tag 'v3.4-rc3-imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Olof Johansson3-3/+6
into fixes ARM i.MX misc fixes for -rc * tag 'v3.4-rc3-imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: imx: Fix imx5 idle logic bug ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple() ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE
2012-04-19Merge tag 'omap-fixes-for-v3.4-rc3' of ↵Olof Johansson10-131/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fix regression for bad uart muxing and oops when PM is not set. Revert one softreset regression and few other minor fixes. * tag 'omap-fixes-for-v3.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP1: DMTIMER: fix broken timer clock source selection ARM: OMAP: serial: Fix the ocp smart idlemode handling bug ARM: OMAP2+: UART: Fix incorrect population of default uart pads ARM: OMAP: sram: fix BUG in dpll code for !PM case ARM: OMAP2/3: VENC hwmods: Remove OCPIF_SWSUP_IDLE flag from VENC slave interface ARM: OMAP2+: hwmod: Revert "ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status" ARM: OMAP2+: hwmod: add softreset delay field and OMAP4 data ARM: OMAP1: mux: add missing include
2012-04-19ARM: bcmring: fix UART declarationsPaul Gortmaker1-2/+2
This error appeared in the bcmring_defconfig build: CC arch/arm/mach-bcmring/core.o arch/arm/mach-bcmring/core.c:55: error: macro "AMBA_APB_DEVICE" requires 6 arguments, but only 5 given arch/arm/mach-bcmring/core.c:55: warning: type defaults to 'int' in declaration of 'AMBA_APB_DEVICE' arch/arm/mach-bcmring/core.c:56: error: macro "AMBA_APB_DEVICE" requires 6 arguments, but only 5 given arch/arm/mach-bcmring/core.c:56: warning: type defaults to 'int' in declaration of 'AMBA_APB_DEVICE' arch/arm/mach-bcmring/core.c:134: error: 'uartA_device' undeclared here (not in a function) arch/arm/mach-bcmring/core.c:135: error: 'uartB_device' undeclared here (not in a function) make[2]: *** [arch/arm/mach-bcmring/core.o] Error 1 It appeared as of commit 8ede1ae65e61282cddba39bde4142be3885a6f5a "ARM: amba: bcmring: use common amba device initializers" Note that in include/linux/amba/bus.h we have: #define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) ... There is an a --> A case error in the busid and a missing zero placeholder for the id field. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> [olof: reworded patch subject] Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-19KVM: VMX: Fix kvm_set_shared_msr() called in preemptible contextAvi Kivity1-1/+4
kvm_set_shared_msr() may not be called in preemptible context, but vmx_set_msr() does so: BUG: using smp_processor_id() in preemptible [00000000] code: qemu-kvm/22713 caller is kvm_set_shared_msr+0x32/0xa0 [kvm] Pid: 22713, comm: qemu-kvm Not tainted 3.4.0-rc3+ #39 Call Trace: [<ffffffff8131fa82>] debug_smp_processor_id+0xe2/0x100 [<ffffffffa0328ae2>] kvm_set_shared_msr+0x32/0xa0 [kvm] [<ffffffffa03a103b>] vmx_set_msr+0x28b/0x2d0 [kvm_intel] ... Making kvm_set_shared_msr() work in preemptible is cleaner, but it's used in the fast path. Making two variants is overkill, so this patch just disables preemption around the call. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-19Merge branch 'for-linus' of ↵Linus Torvalds11-65/+108
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "A couple of bug fixes, one of them is a TLB flush fix. Included as well is one small coding style patch and a patch to update the default configuration." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] Fix compile error in swab.h [S390] Fix stfle() lowcore protection problem [S390] cpum_cf: get rid of compile warnings [S390] irq: simple coding style change [S390] update default configuration [S390] fix tlb flushing for page table pages [S390] kernel: Use local_irq_save() for memcpy_real() [S390] s390/char/vmur.c: fix memory leak [S390] drivers/s390/block/dasd_eckd.c: add missing dasd_sfree_request
2012-04-19Merge 3.4-rc3 into tty-nextGreg Kroah-Hartman75-823/+601
This allows us to pick up some changes needed for other serial patches. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-19tegra, serial8250: add ->handle_break() uart_port opDan Williams4-0/+9
The "KT" serial port has another use case for a "received break" quirk, so before adding another special case to the 8250 core take this opportunity to push such quirks out of the core and into a uart_port op. Stephen says: "If the callback function is to no longer live in 8250.c itself, arch/arm/mach-tegra/devices.c isn't logically a good place to put it, and that file will be going away once we get rid of all the board files and move solely to device tree." ...so since 8250_pci.c houses all the quirks for pci serial devices this quirk is similarly housed in of_serial.c. Once the open firmware conversion completes the infrastructure details (include/linux/of_serial.h, and the export) can all be removed to make this self contained to of_serial.c. Cc: Nhan H Mai <nhan.h.mai@intel.com> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> [stephen: kill CONFIG_SERIAL_TEGRA in favor just using CONFIG_ARCH_TEGRA] Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sudhakar Mamillapalli <sudhakar@fb.com> Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-19OMAP2+: UART: Remove cpu checks for populating errata flagsGovindraj.R2-9/+0
Currently the errata is populated based on cpu checks this can be removed and replaced with module version check of uart ip block. MVR reg is provided within the uart reg map use the same to populate the errata and thus now errata population and handling can be managed within the driver itself. Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Reviewed-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18ARM: imx: Fix imx5 idle logic bugRobert Lee1-1/+1
The imx5_idle() check of the tzic_eanble_wake() return value uses incorrect (inverted) logic causing all attempt to idle to fail. Signed-off-by: Robert Lee <rob.lee@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-18ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple()Fabio Estevam1-2/+4
commit 6b783f7c (irq_domain: Remove irq_domain_add_simple() replaced irq_domain_add_simple with irq_domain_add_legacy() Implement this conversion so that imx27-dt can be built again. Reported-by: Chris Ball <cjb@laptop.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-18ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGEFabio Estevam1-0/+1
Add support for CONFIG_REGULATOR_FIXED_VOLTAGE. Without this option the mx27_3ds cannot have the external Ethernet functional due to the need of smsc regulators. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-18ARM: OMAP1: DMTIMER: fix broken timer clock source selectionPaul Walmsley1-2/+2
DMTIMER source selection on OMAP1 is broken. omap1_dm_timer_set_src() tries to use __raw_{read,write}l() to read from and write to physical addresses, but those functions take virtual addresses. sparse caught this: arch/arm/mach-omap1/timer.c:50:13: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap1/timer.c:50:13: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap1/timer.c:50:13: got unsigned int arch/arm/mach-omap1/timer.c:52:9: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap1/timer.c:52:9: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap1/timer.c:52:9: got unsigned int Fix by using omap_{read,writel}(), just like the other users of the MOD_CONF_CTRL_1 register in the OMAP1 codebase. Of course, in the long term, removing omap_{read,write}l() is the appropriate thing to do; but this will take some work to do this cleanly. Looks like this was caused by 97933d6 (ARM: OMAP1: dmtimer: conversion to platform devices) that dangerously moved code and changed it in the same patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Cc: stable@vger.kernel.org [tony@atomide.com: updated comments to include the breaking commit] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-17ARM: OMAP: serial: Fix the ocp smart idlemode handling bugSantosh Shilimkar1-1/+7
The current serial UART code, while fidling with ocp idlemode bits, forget about the smart idle wakeup bit even if it is supported by UART IP block. This will lead to missing the module wakeup on OMAP's where the smart idle wakeup is supported. This was the root cause of the console sluggishness issue, I have been observing on OMAP4 devices and also can be potential reason for some other UART wakeup issues. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Govindraj.R <govindraj.raja@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-17ARM: OMAP2+: UART: Fix incorrect population of default uart padsGovindraj.R1-116/+0
Commit (7496ba3 ARM: OMAP2+: UART: Add default mux for all uarts) wrongly added muxing of default pads for all uarts. This causes breakage on multiple boards using uart pins for alternate functions. For example, on zoom3 random oopses can be seen with nfsroot as the smsc911x ethernet FIFO timings on GPMC bus are controlled by gpmc_wait2 and gpmc_wait3 pins. This means we can't mux these pads to uart4 functionality as commit 7496ba3 was doing. Not all boards tend to use all uarts and most of unused uart pins are muxed for other purpose. This commit breaks the modules which where trying to use unused uart pins on their boards. So remove the default pad muxing. Note that this is not a complete fix, as we now rely on bootloader set muxing for the uart wake-up events. Further patching is needed to enable wake-up events for uarts that are already muxed to uart mode. Cc: Felipe Balbi <balbi@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: Russ Dill <russ.dill@gmail.com> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> [tony@atomide.com: updated comments to describe oops on zoom3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-17ARM: OMAP: sram: fix BUG in dpll code for !PM caseGrazvydas Ignotas1-6/+6
_omap3_sram_configure_core_dpll is called when SDRC is reprogrammed, which is done regardless of CONFIG_PM setting, so we always need it's setup code too. Without this, we hit a BUG() on OMAP3 when kernel is built without CONFIG_PM: Reprogramming SDRC clock to 332000000 Hz ------------[ cut here ]------------ kernel BUG at arch/arm/plat-omap/sram.c:342! Internal error: Oops - BUG: 0 [#1] ARM ... [<c001c694>] (omap3_configure_core_dpll+0x68/0x6c) from [<c001b2dc>] (omap3_core_dpll_m2_set_rate+0x1) [<c001b2dc>] (omap3_core_dpll_m2_set_rate+0x138/0x1b0) from [<c001a478>] (omap2_clk_set_rate+0x14/0x2) [<c001a478>] (omap2_clk_set_rate+0x14/0x20) from [<c001c9dc>] (clk_set_rate+0x54/0x74) [<c001c9dc>] (clk_set_rate+0x54/0x74) from [<c022b9c8>] (omap_sdrc_init+0x70/0x90) [<c022b9c8>] (omap_sdrc_init+0x70/0x90) from [<c022f178>] (omap3pandora_init+0x11c/0x164) [<c022f178>] (omap3pandora_init+0x11c/0x164) from [<c022849c>] (customize_machine+0x20/0x28) [<c022849c>] (customize_machine+0x20/0x28) from [<c0225810>] (do_one_initcall+0xa0/0x16c) [<c0225810>] (do_one_initcall+0xa0/0x16c) from [<c02259e0>] (kernel_init+0x104/0x1ac) [<c02259e0>] (kernel_init+0x104/0x1ac) from [<c0009cec>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-17m68knommu: make sure 2nd FEC eth interface pins are enabled on 5275 ColdFireGreg Ungerer2-3/+0
The CONFIG_FEC2 define was removed from the kernel many versions ago. But it is still being used to set the multi-function pins when compiling for a ColdFire 527[45] SoC that has 2 ethernet interfaces. Remove the last remaining uses of this define, and so fix the setting of the pins for the 2nd ethernet interface. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-17m68knommu: fix id number for second eth device on 5275 ColdFireGreg Ungerer1-1/+1
The second ColdFire FEC ethernet device should have an id number of 1, not 0. Otherwise it clashes with the first FEC ethernet device. On booting a kernel on a 5275 based board you will get messages out of the kernel like this: <4>------------[ cut here ]------------ <4>WARNING: at fs/sysfs/dir.c:508 0x0a8b50() <4>sysfs: cannot create duplicate filename 'fec.0' And likely you won't be able to completely boot up after this at all. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-17Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-17/+36
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Handle failures of parsing immediate operands in the instruction decoder perf archive: Correct cutting of symbolic link perf tools: Ignore auto-generated bison/flex files perf tools: Fix parsers' rules to dependencies perf tools: fix NO_GTK2 Makefile config error perf session: Skip event correctly for unknown id/machine
2012-04-17ia64: fix futex_atomic_cmpxchg_inatomic()Luck, Tony1-4/+5
Michel Lespinasse cleaned up the futex calling conventions in commit 37a9d912b24f ("futex: Sanitize cmpxchg_futex_value_locked API"). But the ia64 implementation was subtly broken. Gcc does not know that register "r8" will be updated by the fault handler if the cmpxchg instruction takes an exception. So it feels safe in letting the initialization of r8 slide to after the cmpxchg. Result: we always return 0 whether the user address faulted or not. Fix by moving the initialization of r8 into the __asm__ code so gcc won't move it. Reported-by: <emeric.maschino@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42757 Tested-by: <emeric.maschino@gmail.com> Acked-by: Michel Lespinasse <walken@google.com> Cc: stable@vger.kernel.org # v2.6.39+ Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-16mfd: Convert twl6040 to i2c driver, and separate it from twl corePeter Ujfalusi5-25/+49
Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16ARM: at91: fix at91sam9261ek Ethernet dm9000 irqJean-Christophe PLAGNIOL-VILLARD1-2/+3
You need to setup the dm9000 irq via gpio_to_irq() since d0fbda9add (ARM: at91/gpio: drop PIN_BASE). Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> [3.2+]
2012-04-16ARM: at91: fix rm9200ek flash sizeJean-Christophe PLAGNIOL-VILLARD1-1/+1
The flash size is 8MiB. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: remove empty at91_init_serial functionJoachim Eastwood1-1/+0
The real function is long gone and the empty one will generate warnings when configured without Atmel serial: arch/arm/mach-at91/at91rm9200_devices.c:1176: warning: 'struct at91_uart_config' declared inside parameter list arch/arm/mach-at91/at91rm9200_devices.c:1176: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: fix typo in at91_pmc_base assembly declarationNicolas Ferre1-1/+1
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: Export at91_matrix_baseJoachim Eastwood1-0/+1
at91_matrix_* macro's are used by at91_udc usb gadget driver, which can be built as module, therefore we need to export the variable containing matrix base address. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: Export at91_pmc_baseJoachim Eastwood1-0/+1
After commit b55149529d26 (ARM: at91/PMC: make register base soc independent) building atmel_usba_udc as a module fails with following message ERROR: "at91_pmc_base" [drivers/usb/gadget/atmel_usba_udc.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Export symbol to allow driver to be built as a module again. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: Export at91_ramc_baseJoachim Eastwood1-0/+1
After commit f363c40 (ARM: at91: make sdram/ddr register base soc independent) building at91_cf as a module fails with: ERROR: "at91_ramc_base" [drivers/pcmcia/at91_cf.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Export at91_ramc_base symbol to allow drivers using at91_ramc_* functions to be built as modules again. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> [nicolas.ferre@atmel.com: modify slightly commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: Export at91_st_baseJoachim Eastwood1-0/+2
After commit 5e9cf5e (ARM: at91: make ST (System Timer) soc independent) building at91rm9200_wdt as a module fails with following message ERROR: "at91_st_base" [drivers/watchdog/at91rm9200_wdt.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Export symbol to allow wdt driver to be built as a module again. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> [nicolas.ferre@atmel.com: use EXPORT_SYMBOL_GPL()] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: ux500: update defconfigLinus Walleij1-5/+4
Some new drivers and changed Kconfig dependencies for the v3.4 kernel affecting the U8500 defconfig: - The SOC config options are now brought in by default - No need to explicitly select misc devices anymore - I2C is selected by default - We now have support for charging from the AB8500 so compile in this - The regulator framework needs to be explictly selected Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-16ARM: ux500: Fix unmet direct dependencyLee Jones1-0/+1
A recent change to a Kconfig configuration saw MACH_U8500 remove TPS6105X selection. In doing so Kconfig stopped selecting REGULATORS, which is still required. This patch sees UX500_SOC_DB8500 explicitly select it instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-16x86: Handle failures of parsing immediate operands in the instruction decoderMasami Hiramatsu1-17/+36
This can happen if the instruction is much longer than the maximum length, or if insn->opnd_bytes is manually changed. This patch also fixes warnings from -Wswitch-default flag. Reported-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: yrl.pp-manager.tt@hitachi.com Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120413032427.32577.42602.stgit@localhost.localdomain Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-16m68knommu: move and fix the 68VZ328 platform bootlogo.hGreg Ungerer1-1/+1
The 68EZ328/bootlogo.h is not actually used in the 68EZ328 platform code at all. It is used by the 68VZ328 platform code though, so move it to be with the rest of the 68VZ328 platform code. Commit c0e0c89c089f4bd66dbbd1a44da90abe74fe3f02 ("fix broken boot logo inclusion") modified the bootlogo code to not be included in asm code. Modify 68VZ328/bootlogo.h so that the bootlogo bit map is named correctly for direct use in the C code. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-16m68knommu: remove the unused bootlogo.h processing for 68EZ328 and 68VZ328Greg Ungerer2-13/+2
The 68EZ328 and 68VZ328 platforms currently try to process their bootlogo.h to make it clean to include in asm files. This is no longer used, the bootlogo.h file is now included only in C code, so remove all the processing code in the 68EZ328 and 68VZ328 Makefiles. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-16Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds10-11/+44
Pull ARM fixes from Russell King: "Nothing too disasterous, the biggest thing being the removal of the regulator support for vcore in the AMBA driver; only one SoC was using this and it got broken during the last merge window, which then started causing problems for other people. Mutual agreement was reached for it to be removed." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7386/1: jump_label: fixup for rename to static_key ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE ARM: 7382/1: mm: truncate memory banks to fit in 4GB space for classic MMU ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus ARM: 7383/1: nommu: populate vectors page from paging_init ARM: 7381/1: nommu: fix typo in mm/Kconfig ARM: 7380/1: DT: do not add a zero-sized memory property ARM: 7379/1: DT: fix atags_to_fdt() second call site ARM: 7366/3: amba: Remove AMBA level regulator support ARM: 7377/1: vic: re-read status register before dispatching each IRQ handler ARM: 7368/1: fault.c: correct how the tsk->[maj|min]_flt gets incremented
2012-04-16x86-32: fix up strncpy_from_user() sign errorLinus Torvalds1-2/+2
The 'max' range needs to be unsigned, since the size of the user address space is bigger than 2GB. We know that 'count' is positive in 'long' (that is checked in the caller), so we will truncate 'max' down to something that fits in a signed long, but before we actually do that, that comparison needs to be done in unsigned. Bug introduced in commit 92ae03f2ef99 ("x86: merge 32/64-bit versions of 'strncpy_from_user()' and speed it up"). On x86-64 you can't trigger this, since the user address space is much smaller than 63 bits, and on x86-32 it works in practice, since you would seldom hit the strncpy limits anyway. I had actually tested the corner-cases, I had only tested them on x86-64. Besides, I had only worried about the case of a pointer *close* to the end of the address space, rather than really far away from it ;) This also changes the "we hit the user-specified maximum" to return 'res', for the trivial reason that gcc seems to generate better code that way. 'res' and 'count' are the same in that case, so it really doesn't matter which one we return. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-16ARM: 7386/1: jump_label: fixup for rename to static_keyRabin Vincent1-1/+1
c5905afb0 ("static keys: Introduce 'struct static_key'...") renamed struct jump_label_key to struct static_key. Fixup ARM for this to eliminate these build warnings: include/linux/jump_label.h:113:2: warning: passing argument 1 of 'arch_static_branch' from incompatible pointer type include/asm/jump_label.h:17:82: note: expected 'struct jump_label_key *' but argument is of type 'struct static_key *' Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-16ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEEJonathan Austin1-0/+12
Currently when ThumbEE is not enabled (!CONFIG_ARM_THUMBEE) the ThumbEE register states are not saved/restored at context switch. The default state of the ThumbEE Ctrl register (TEECR) allows userspace accesses to the ThumbEE Base Handler register (TEEHBR). This can cause unexpected behaviour when people use ThumbEE on !CONFIG_ARM_THUMBEE kernels, as well as allowing covert communication - eg between userspace tasks running inside chroot jails. This patch sets up TEECR in order to prevent user-space access to TEEHBR when !CONFIG_ARM_THUMBEE. In this case, tasks are sent SIGILL if they try to access TEEHBR. Cc: stable@vger.kernel.org Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 23:58:32 +0300