summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2011-05-23Merge branch 'devel-stable' into for-linusRussell King210-7724/+3892
Conflicts: arch/arm/Kconfig arch/arm/mach-ns9xxx/include/mach/uncompress.h
2011-05-23Merge branches 'consolidate', 'ep93xx', 'fixes', 'misc', 'mmci', 'remove' ↵Russell King82-3591/+1237
and 'spear' into for-linus
2011-05-23Merge branches 'consolidate-clksrc', 'consolidate-flash', ↵Russell King156-10300/+379
'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
2011-05-23ARM: bcmring: convert to use sp804 clockeventsRussell King1-110/+8
bcmring has a set of four sp804 timers incorporated, yet it has its own copy of the sp804 code. Convert its clockevent implementation to the standard sp804 support code. Cc: Jiandong Zheng <jdzheng@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23ARM: bcmring: convert to sp804 clocksourceRussell King2-64/+45
bcmring has a set of four sp804 timers incorporated, yet it has its own copy of the sp804 code. Convert its clocksource implementation to the standard sp804 support code. Cc: Jiandong Zheng <jdzheng@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23ARM: 6912/1: bcmring: Add clkdev table in init_earlyJiandong Zheng3-2/+7
Move adding clkdev table to init_early to make sure the common sp804 clockevents can be initialized properly. Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clockevents: ARM sp804: obtain sp804 timer rate via clksRussell King3-8/+16
This allows platforms to specify the rate of the SP804 clockevent via the clk subsystem. While ARM boards clock these at 1MHz, BCMRing also has SP804 timers but are clocked at different rates. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clockevents: ARM sp804: allow clockevent name to be specifiedRussell King7-10/+13
This allows platforms to specify the clcokevent name upon registration. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: ARM sp804: obtain sp804 timer rate via clksRussell King6-3/+77
This allows platforms to specify the rate of the SP804 clocksource via the clk subsystem. While ARM boards clock these at 1MHz, BCMRing also has SP804 timers but are clocked at different rates. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: ARM sp804: allow clocksource name to be specifiedRussell King7-8/+8
This allows platforms to specify the clocksource name upon registration, which is necessary should they wish to register more than one sp804 clocksource. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: convert OMAP1 to 32-bit down counting clocksourceRussell King2-17/+7
Convert the OMAP1 32-bit down counting clocksource to the generic clocksource infrastructure. Tested-by: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: convert MXS timrotv2 to 32-bit down counting clocksourceRussell King2-13/+8
Convert the MXS timrotv2 32-bit down counting clocksource to the generic clocksource infrastructure. Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: convert SPEAr platforms 16-bit up counting clocksourceRussell King2-14/+3
Convert SPEAr platforms 16-bit up counting clocksource, which requires a 16-bit register access read rather than 32-bit. Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: convert Integrator/AP 16-bit down counting clocksourceRussell King2-18/+4
Convert the Integrator/AP 16-bit down-counting clocksource to the generic clocksource infrastructure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: convert W90x900 24-bit down counting clocksourceRussell King2-15/+3
Convert the W90x900 24-bit down-counting clocksource to the generic mmio clocksource infrastructure Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: convert ARM 32-bit down counting clocksourcesRussell King6-87/+16
Convert SP804, MXC, Nomadik and Orion 32-bit down-counting clocksources to generic mmio clocksource infrastructure. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Lennert Buytenhek <kernel@wantstofly.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23clocksource: convert ARM 32-bit up counting clocksourcesRussell King10-145/+34
Convert ixp4xx, lpc32xx, mxc, netx, pxa, sa1100, tcc8k, tegra and u300 to use the generic mmio clocksource recently introduced. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: "Hans J. Koch" <hjk@hansjkoch.de> Acked-by: Colin Cross <ccross@android.com> Cc: Erik Gilling <konkers@android.com> Cc: Olof Johansson <olof@lixom.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23ARM: update sa1100 to reflect PXA updatesRussell King1-5/+3
Update sa1100 clockevents code to reflect what its later derivative does with clockevents_calc_mult_shift(). Use OSSR_M* constants too. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23ARM: omap1: convert to using readl/writel instead of volatile structRussell King1-15/+16
Tested-by: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23ARM: omap1: delete useless interrupt handlerRussell King1-15/+0
The OMAP1 clocksource interrupt handler just increments a variable which otherwise isn't used, so this seems to be unnecessary. Tony Lindgren confirms, so lets remove it. Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23ARM: s5p: consolidate selection of timer registerRussell King1-41/+17
s5p duplicates the runtime selection of the timer register three times. Move this out into a separate function. FIXME: It is unclear whether this code needs to support true runtime selection of the timer register, or whether it can be selected once at init time. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23ARM: 6939/1: fix missing 'cpu_relax()' declarationMarc Zyngier1-0/+2
ARM build fails with the following symptom: CC arch/arm/kernel/asm-offsets.s In file included from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/timex.h:56, from include/linux/sched.h:57, from arch/arm/kernel/asm-offsets.c:13: include/linux/spinlock.h: In function 'spin_unlock_wait': include/linux/spinlock.h:360: error: implicit declaration of function 'cpu_relax' make[1]: *** [arch/arm/kernel/asm-offsets.s] Error 1 Fix it by including <asm/processor.h>. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23ARM: 6895/1: mach-ux500: fix SMP secondary startup regressionLinus Walleij1-0/+3
Commit e2a083dc0da9aa6437e14811198379b18cdfa7f8 "ARM: consolidate SMP cross call implementation" broke the ux500 compilation since the smp.h header declared a function called from headsmp.S. This fixes it up by declaring it locally instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23ARM: consolidate SMP cross call implementationRussell King19-162/+37
Rather than having each platform class provide a mach/smp.h header for smp_cross_call(), arrange for them to register the function with the core ARM SMP code instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23ARM: Fix generic irq chipRussell King2-0/+3
As a result of c42321c (genirq: Make generic irq chip depend on CONFIG_GENERIC_IRQ_CHIP), we now need those platforms using this in my tree to select this symbol. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nico@fluxnic.net> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds14-261/+1016
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (45 commits) crypto: caam - add support for sha512 variants of existing AEAD algorithms crypto: caam - remove unused authkeylen from caam_ctx crypto: caam - fix decryption shared vs. non-shared key setting crypto: caam - platform_bus_type migration crypto: aesni-intel - fix aesni build on i386 crypto: aesni-intel - Merge with fpu.ko crypto: mv_cesa - make count_sgs() null-pointer proof crypto: mv_cesa - copy remaining bytes to SRAM only when needed crypto: mv_cesa - move digest state initialisation to a better place crypto: mv_cesa - fill inner/outer IV fields only in HMAC case crypto: mv_cesa - refactor copy_src_to_buf() crypto: mv_cesa - no need to save digest state after the last chunk crypto: mv_cesa - print a warning when registration of AES algos fail crypto: mv_cesa - drop this call to mv_hash_final from mv_hash_finup crypto: mv_cesa - the descriptor pointer register needs to be set just once crypto: mv_cesa - use ablkcipher_request_cast instead of the manual container_of crypto: caam - fix printk recursion for long error texts crypto: caam - remove unused keylen from session context hwrng: amd - enable AMD hw rnd driver for Maple PPC boards hwrng: amd - manage resource allocation ...
2011-05-21powerpc: Fix 32-bit SMP buildJosh Boyer1-1/+1
Commit 69e3cea8d5fd526 ("powerpc/smp: Make start_secondary_resume available to all CPU variants") introduced start_secondary_resume to misc_32.S, however it uses a 64-bit instruction which is not valid on 32-bit platforms. Use 'stw' instead. Reported-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-21ARM: 6915/1: SAMSUNG: Depend on IRQ_GENERIC_CHIPMark Brown1-0/+1
The generic chip infrastructure has had a Kconfig symbol added so we need to select that for the kernel to link now we're using the generic IRQ chip infrastructure. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6902/1: perf: Remove erroneous check on active_eventsMark Rutland1-5/+0
When initialising a PMU, there is a check to protect against races with other CPUs filling all of the available event slots. Since armpmu_add checks that an event can be scheduled, we do not need to do this at initialisation time. Furthermore the current code is broken because it assumes that atomic_inc_not_zero will unconditionally increment active_counts and then tries to decrement it again on failure. This patch removes the broken, redundant code. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6899/1: fix the note about dcache lazy flushing for SMP systemssaeed bishara1-1/+2
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6933/1: SPEAR6xx: Rename spear600_defconfig as spear6xx_defconfigviresh kumar1-1/+1
Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6934/1: SPEAr6xx: Rework Kconfig for single image solutionviresh kumar2-24/+8
Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6932/1: SPEAr3xx: Replace defconfigs with single unified defconfigRyan Mallon3-105/+3
We only need one defconfig for SPEAr3xx now since we can build all three boards into one kernel. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6931/1: SPEAr3xx: Rework KConfig to allow all boards to be compiled inRyan Mallon4-61/+20
Now that all three SPEAr3xx platforms can be built into one kernel, rework KConfig to allow this. Move everything into one KConfig file while we are here. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6929/1: SPEAr3xx: Append spear3** with global device structuresviresh kumar6-13/+13
Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6930/1: SPEAr3xx: Rework pmx_dev code to remove conflictsRyan Mallon8-325/+328
Prefix the pmx_devs to remove naming conflicts between the three SPEAr3xx platforms. Also make pmx_driver static to each platform and rework the init code to pass the devices rather than export the pmx_driver structure. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6935/1: SPEAR3xx: Rename register/irq defines to remove naming conflictsRyan Mallon9-312/+314
Prefix register and irq defintions to remove naming conflicts between the three SPEAr3xx platforms. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6928/1: SPEAr3xx: Make local shirq structures staticRyan Mallon3-16/+16
Several structures in arch/arm/mach-spear3xx are not marked static like they should be. Fix this. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6927/1: SPEAr Clock: Update for single image solutionviresh kumar1-27/+43
This patch creates different clk_lookup arrays for individual machines. These lookup arrays will be registered only if that specific machine is current machine. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6926/1: SPEAr clock: Define common clk_init routine in plat/clock.cviresh kumar8-8/+14
Define common clk_init routine in plat/clock.c for calling recalc_root_clocks. This routine will be used for any common code across all machine families. Whereas family specific spear*xx_clk_init routines will be used for family specific code. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6910/1: MTD: physmap: let set_vpp() pass a platform_device instead of a ↵Marc Zyngier10-10/+10
map_info The set_vpp() method provided by physmap passes a map_info back to the platform code, which has little relevance as far as the platform is concerned (this parameter is completely unused). Instead, pass the platform_device, which can be used in the pismo driver to retrieve some important information in a nicer way, instead of the hack that was in place. The empty set_vpp function in board-at572d940hf_ek.c is left untouched, as the board/SoC is scheduled for removal. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6905/1: Integrator/CP: Use physmap driver instead of integrator-flashMarc Zyngier1-7/+6
Tested with an ARM-1136 core tile. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6908/1: Integrator/AP: Use physmap driver instead of integrator-flashMarc Zyngier1-7/+6
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6909/1: VExpress: Use physmap driver instead of integrator-flashMarc Zyngier1-18/+4
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6907/1: Versatile: Use physmap driver instead of integrator-flashMarc Zyngier2-28/+5
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21ARM: 6903/1: Realview: Use physmap driver instead of integrator-flashMarc Zyngier3-29/+6
Tested on a PB11-MPCore. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds15-19/+822
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits) macvlan: fix panic if lowerdev in a bond tg3: Add braces around 5906 workaround. tg3: Fix NETIF_F_LOOPBACK error macvlan: remove one synchronize_rcu() call networking: NET_CLS_ROUTE4 depends on INET irda: Fix error propagation in ircomm_lmp_connect_response() irda: Kill set but unused variable 'bytes' in irlan_check_command_param() irda: Kill set but unused variable 'clen' in ircomm_connect_indication() rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport() be2net: Kill set but unused variable 'req' in lancer_fw_download() irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication() atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined. rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer(). rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler() rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection() rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window() pkt_sched: Kill set but unused variable 'protocol' in tc_classify() isdn: capi: Use pr_debug() instead of ifdefs. tg3: Update version to 3.119 tg3: Apply rx_discards fix to 5719/5720 ... Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c as per Davem.
2011-05-21Merge branch 'release' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] define "_sdata" symbol pstore: Fix Kconfig dependencies for apei->pstore pstore: fix potential logic issue in pstore read interface pstore: fix pstore filesystem mount/remount issue pstore: fix one type of return value in pstore [IA64] fix build warning in arch/ia64/oprofile/backtrace.c
2011-05-21Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds6-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: extable, core_kernel_data(): Make sure all archs define _sdata core_kernel_data(): Fix architectures that do not define _sdata
2011-05-21Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/miscLinus Torvalds1-9/+5
* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (41 commits) signal: trivial, fix the "timespec declared inside parameter list" warning job control: reorganize wait_task_stopped() ptrace: fix signal->wait_chldexit usage in task_clear_group_stop_trapping() signal: sys_sigprocmask() needs retarget_shared_pending() signal: cleanup sys_sigprocmask() signal: rename signandsets() to sigandnsets() signal: do_sigtimedwait() needs retarget_shared_pending() signal: introduce do_sigtimedwait() to factor out compat/native code signal: sys_rt_sigtimedwait: simplify the timeout logic signal: cleanup sys_rt_sigprocmask() x86: signal: sys_rt_sigreturn() should use set_current_blocked() x86: signal: handle_signal() should use set_current_blocked() signal: sigprocmask() should do retarget_shared_pending() signal: sigprocmask: narrow the scope of ->siglock signal: retarget_shared_pending: optimize while_each_thread() loop signal: retarget_shared_pending: consider shared/unblocked signals only signal: introduce retarget_shared_pending() ptrace: ptrace_check_attach() should not do s/STOPPED/TRACED/ signal: Turn SIGNAL_STOP_DEQUEUED into GROUP_STOP_DEQUEUED signal: do_signal_stop: Remove the unneeded task_clear_group_stop_pending() ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-28 15:00:28 +0300