summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski49-75/+161
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-11Merge tag 'powerpc-5.10-6' of ↵Linus Torvalds2-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One commit to implement copy_from_kernel_nofault_allowed(), otherwise copy_from_kernel_nofault() can trigger warnings when accessing bad addresses in some configurations. Thanks to Christophe Leroy and Qian Cai" * tag 'powerpc-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()
2020-12-10Merge tag 'arm-soc-fixes-v5.10-4b' of ↵Linus Torvalds14-22/+18
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "There are a few more PHY mode changes for allwinner SoC based boards with a Realtek PHY after the driver changed its behavior, I assume there will be more of these in the future. Also on for Allwinner, the Banana Pi M2 board had a regression that led to some devices not working because of a slightly incorrect voltage being applied. By popular demand, I picked up a change from Krzysztof Kozlowski to actually list the SoC tree in the MAINTAINERS file. We don't want to get Cc'd on normal patches that are picked up by platform maintainers, but the lack of an entry has led to confusion in the past. All the other changes are fairly benign, fixing boot-time or compile-time warning messages in various places: - A dtc warning on the OLPC XO-1.75 - A boot-time warning on i.MX6 wandboard - A harmless compile-time warning - A regression causing one of the i.MX6 SoCs to be identified as another - Missing SoC identification of Allwinner V3 and S3" * tag 'arm-soc-fixes-v5.10-4b' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: firmware: xilinx: Mark pm_api_features_map with static keyword ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbs MAINTAINERS: add a limited ARM and ARM64 SoC entry MAINTAINERS: correct SoC Git address (formerly: arm-soc) ARM: keystone: remove SECTION_SIZE_BITS/MAX_PHYSMEM_BITS arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp ARM: imx: Use correct SRC base address ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY ARM: dts: sun8i: v3s: fix GIC node memory range ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: s3: pinecube: align compatible property to other S3 boards ARM: sunxi: Add machine match for the Allwinner V3 SoC arm64: dts: allwinner: h6: orangepi-one-plus: Fix ethernet
2020-12-10ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbsZhen Lei1-2/+1
The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node have "spi-slave" property must with "#address-cells = <0>" and "#size-cells = <0>". But currently both "#address-cells" and "#size-cells" properties are deleted, the corresponding default values are 2 and 1. As a result, the check fails and below warnings is displayed. arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \ Failed prerequisite 'spi_bus_bridge' Because the value of "#size-cells" is already defined as zero in the node "ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to explicitly add "#address-cells = <0>" and keep "#size-cells" no change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20201207084752.1665-2-thunder.leizhen@huawei.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'sunxi-fixes-for-5.10-3' of ↵Arnd Bergmann2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A few more RGMII-ID fixes * tag 'sunxi-fixes-for-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id Link: https://lore.kernel.org/r/2a351c9c-470f-4c5e-ba37-80065ae0586d.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull sparc64 csum fix from Al Viro: "Fix for a brown paperbag regression in sparc64" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [regression fix] really dumb fuckup in sparc64 __csum_partial_copy() changes
2020-12-09[regression fix] really dumb fuckup in sparc64 __csum_partial_copy() changesAl Viro1-1/+1
~0U is -1, not 1 Reported-by: Anatoly Pugachev <matorola@gmail.com> Tested-by: Anatoly Pugachev <matorola@gmail.com> Fixes: fdf8bee96f9a "sparc64: propagate the calling convention changes down to __csum_partial_copy_...()" X-brown-paperbag: yes Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-12-08powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()Christophe Leroy2-1/+10
Since commit c33165253492 ("powerpc: use non-set_fs based maccess routines"), userspace access is not granted anymore when using copy_from_kernel_nofault() However, kthread_probe_data() uses copy_from_kernel_nofault() to check validity of pointers. When the pointer is NULL, it points to userspace, leading to a KUAP fault and triggering the following big hammer warning many times when you request a sysrq "show task": [ 1117.202054] ------------[ cut here ]------------ [ 1117.202102] Bug: fault blocked by AP register ! [ 1117.202261] WARNING: CPU: 0 PID: 377 at arch/powerpc/include/asm/nohash/32/kup-8xx.h:66 do_page_fault+0x4a8/0x5ec [ 1117.202310] Modules linked in: [ 1117.202428] CPU: 0 PID: 377 Comm: sh Tainted: G W 5.10.0-rc5-01340-g83f53be2de31-dirty #4175 [ 1117.202499] NIP: c0012048 LR: c0012048 CTR: 00000000 [ 1117.202573] REGS: cacdbb88 TRAP: 0700 Tainted: G W (5.10.0-rc5-01340-g83f53be2de31-dirty) [ 1117.202625] MSR: 00021032 <ME,IR,DR,RI> CR: 24082222 XER: 20000000 [ 1117.202899] [ 1117.202899] GPR00: c0012048 cacdbc40 c2929290 00000023 c092e554 00000001 c09865e8 c092e640 [ 1117.202899] GPR08: 00001032 00000000 00000000 00014efc 28082224 100d166a 100a0920 00000000 [ 1117.202899] GPR16: 100cac0c 100b0000 1080c3fc 1080d685 100d0000 100d0000 00000000 100a0900 [ 1117.202899] GPR24: 100d0000 c07892ec 00000000 c0921510 c21f4440 0000005c c0000000 cacdbc80 [ 1117.204362] NIP [c0012048] do_page_fault+0x4a8/0x5ec [ 1117.204461] LR [c0012048] do_page_fault+0x4a8/0x5ec [ 1117.204509] Call Trace: [ 1117.204609] [cacdbc40] [c0012048] do_page_fault+0x4a8/0x5ec (unreliable) [ 1117.204771] [cacdbc70] [c00112f0] handle_page_fault+0x8/0x34 [ 1117.204911] --- interrupt: 301 at copy_from_kernel_nofault+0x70/0x1c0 [ 1117.204979] NIP: c010dbec LR: c010dbac CTR: 00000001 [ 1117.205053] REGS: cacdbc80 TRAP: 0301 Tainted: G W (5.10.0-rc5-01340-g83f53be2de31-dirty) [ 1117.205104] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28082224 XER: 00000000 [ 1117.205416] DAR: 0000005c DSISR: c0000000 [ 1117.205416] GPR00: c0045948 cacdbd38 c2929290 00000001 00000017 00000017 00000027 0000000f [ 1117.205416] GPR08: c09926ec 00000000 00000000 3ffff000 24082224 [ 1117.206106] NIP [c010dbec] copy_from_kernel_nofault+0x70/0x1c0 [ 1117.206202] LR [c010dbac] copy_from_kernel_nofault+0x30/0x1c0 [ 1117.206258] --- interrupt: 301 [ 1117.206372] [cacdbd38] [c004bbb0] kthread_probe_data+0x44/0x70 (unreliable) [ 1117.206561] [cacdbd58] [c0045948] print_worker_info+0xe0/0x194 [ 1117.206717] [cacdbdb8] [c00548ac] sched_show_task+0x134/0x168 [ 1117.206851] [cacdbdd8] [c005a268] show_state_filter+0x70/0x100 [ 1117.206989] [cacdbe08] [c039baa0] sysrq_handle_showstate+0x14/0x24 [ 1117.207122] [cacdbe18] [c039bf18] __handle_sysrq+0xac/0x1d0 [ 1117.207257] [cacdbe48] [c039c0c0] write_sysrq_trigger+0x4c/0x74 [ 1117.207407] [cacdbe68] [c01fba48] proc_reg_write+0xb4/0x114 [ 1117.207550] [cacdbe88] [c0179968] vfs_write+0x12c/0x478 [ 1117.207686] [cacdbf08] [c0179e60] ksys_write+0x78/0x128 [ 1117.207826] [cacdbf38] [c00110d0] ret_from_syscall+0x0/0x34 [ 1117.207938] --- interrupt: c01 at 0xfd4e784 [ 1117.208008] NIP: 0fd4e784 LR: 0fe0f244 CTR: 10048d38 [ 1117.208083] REGS: cacdbf48 TRAP: 0c01 Tainted: G W (5.10.0-rc5-01340-g83f53be2de31-dirty) [ 1117.208134] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 44002222 XER: 00000000 [ 1117.208470] [ 1117.208470] GPR00: 00000004 7fc34090 77bfb4e0 00000001 1080fa40 00000002 7400000f fefefeff [ 1117.208470] GPR08: 7f7f7f7f 10048d38 1080c414 7fc343c0 00000000 [ 1117.209104] NIP [0fd4e784] 0xfd4e784 [ 1117.209180] LR [0fe0f244] 0xfe0f244 [ 1117.209236] --- interrupt: c01 [ 1117.209274] Instruction dump: [ 1117.209353] 714a4000 418200f0 73ca0001 40820084 73ca0032 408200f8 73c90040 4082ff60 [ 1117.209727] 0fe00000 3c60c082 386399f4 48013b65 <0fe00000> 80010034 3860000b 7c0803a6 [ 1117.210102] ---[ end trace 1927c0323393af3e ]--- To avoid that, copy_from_kernel_nofault_allowed() is used to check whether the address is a valid kernel address. But the default version of it returns true for any address. Provide a powerpc version of copy_from_kernel_nofault_allowed() that returns false when the address is below TASK_USER_MAX, so that copy_from_kernel_nofault() will return -ERANGE. Fixes: c33165253492 ("powerpc: use non-set_fs based maccess routines") Reported-by: Qian Cai <qcai@redhat.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/18bcb456d32a3e74f5ae241fd6f1580c092d07f5.1607360230.git.christophe.leroy@csgroup.eu
2020-12-07ARM: keystone: remove SECTION_SIZE_BITS/MAX_PHYSMEM_BITSArnd Bergmann1-3/+0
These definitions are evidently left over from the days when sparsemem settings were platform specific. This was no longer the case when the platform got merged. There was no warning in the past, but now the asm/sparsemem.h header ends up being included indirectly, causing this warning: In file included from /git/arm-soc/arch/arm/mach-keystone/keystone.c:24: arch/arm/mach-keystone/memory.h:10:9: warning: 'SECTION_SIZE_BITS' macro redefined [-Wmacro-redefined] #define SECTION_SIZE_BITS 34 ^ arch/arm/include/asm/sparsemem.h:23:9: note: previous definition is here #define SECTION_SIZE_BITS 28 ^ Clearly the definitions never had any effect here, so remove them. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201203231847.1484900-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07Merge tag 'imx-fixes-5.10-5' of ↵Arnd Bergmann3-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, round 5: - Fix a regression on SoC revision detection with ANATOP, that is introduced by commit 4a4fb66119eb ("ARM: imx: Add missing of_node_put()"). - Drop PAD_GPIO_6 from imx6qdl-wandboard ENET pin group, as the pin is used by camera sensor now. - Fix I2C3_SCL pinmux on imx6qdl-kontron-samx6i board, so that SoM EEPROM can be accessed. * tag 'imx-fixes-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp ARM: imx: Use correct SRC base address Link: https://lore.kernel.org/r/20201201091820.GW4072@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07Merge tag 'sunxi-fixes-for-5.10-2' of ↵Arnd Bergmann7-12/+13
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A few more RGMII-ID fixes, and a bunch of other more random fixes * tag 'sunxi-fixes-for-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY ARM: dts: sun8i: v3s: fix GIC node memory range ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: s3: pinecube: align compatible property to other S3 boards ARM: sunxi: Add machine match for the Allwinner V3 SoC arm64: dts: allwinner: h6: orangepi-one-plus: Fix ethernet Link: https://lore.kernel.org/r/1280f1de-1b6d-4cc2-8448-e5a9096a41e8.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-06Merge tag 'usb-5.10-rc7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.10-rc7 that resolve a number of reported issues, and add some new device ids. Nothing major here, but these solve some problems that people were having with the 5.10-rc tree: - reverts for USB storage dma settings that broke working devices - thunderbolt use-after-free fix - cdns3 driver fixes - gadget driver userspace copy fix - new device ids All of these except for the reverts have been in linux-next with no reported issues. The reverts are "clean" and were tested by Hans, as well as passing the 0-day tests" * tag 'usb-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_fs: Use local copy of descriptors for userspace copy usb: ohci-omap: Fix descriptor conversion Revert "usb-storage: fix sdev->host->dma_dev" Revert "uas: fix sdev->host->dma_dev" Revert "uas: bump hw_max_sectors to 2048 blocks for SS or faster drives" USB: serial: kl5kusb105: fix memleak on open USB: serial: ch341: sort device-id entries USB: serial: ch341: add new Product ID for CH341A USB: serial: option: fix Quectel BG96 matching usb: cdns3: core: fix goto label for error path usb: cdns3: gadget: clear trb->length as zero after preparing every trb usb: cdns3: Fix hardware based role switch USB: serial: option: add support for Thales Cinterion EXS82 USB: serial: option: add Fibocom NL668 variants thunderbolt: Fix use-after-free in remove_unplugged_switch()
2020-12-06Merge tag 'x86-urgent-2020-12-06' of ↵Linus Torvalds8-15/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Make the AMD L3 QoS code and data priorization enable/disable mechanism work correctly. The control bit was only set/cleared on one of the CPUs in a L3 domain, but it has to be modified on all CPUs in the domain. The initial documentation was not clear about this, but the updated one from Oct 2020 spells it out. - Fix an off by one in the UV platform detection code which causes the UV hubs to be identified wrongly. The chip revisions start at 1 not at 0. - Fix a long standing bug in the evaluation of prefixes in the uprobes code which fails to handle repeated prefixes properly. The aggregate size of the prefixes can be larger than the bytes array but the code blindly iterated over the aggregate size beyond the array boundary. Add a macro to handle this case properly and use it at the affected places" * tag 'x86-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev-es: Use new for_each_insn_prefix() macro to loop over prefixes bytes x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes x86/platform/uv: Fix UV4 hub revision adjustment x86/resctrl: Fix AMD L3 QOS CDP enable/disable
2020-12-06Merge tag 'perf-urgent-2020-12-06' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Two fixes for performance monitoring on X86: - Add recursion protection to another callchain invoked from x86_pmu_stop() which can recurse back into x86_pmu_stop(). The first attempt to fix this missed this extra code path. - Use the already filtered status variable to check for PEBS counter overflow bits and not the unfiltered full status read from IA32_PERF_GLOBAL_STATUS which can have unrelated bits check which would be evaluated incorrectly" * tag 'perf-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Check PEBS status correctly perf/x86/intel: Fix a warning on x86_pmu_stop() with large PEBS
2020-12-06Merge tag 'irq-urgent-2020-12-06' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of updates for the interrupt subsystem: - Make multiqueue devices which use the managed interrupt affinity infrastructure work on PowerPC/Pseries. PowerPC does not use the generic infrastructure for setting up PCI/MSI interrupts and the multiqueue changes failed to update the legacy PCI/MSI infrastructure. Make this work by passing the affinity setup information down to the mapping and allocation functions. - Move Jason Cooper from MAINTAINERS to CREDITS as his mail is bouncing and he's not reachable. We hope all is well with him and say thanks for his work over the years" * tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: powerpc/pseries: Pass MSI affinity to irq_create_mapping() genirq/irqdomain: Add an irq_create_mapping_affinity() function MAINTAINERS: Move Jason Cooper to CREDITS
2020-12-06Merge tag 'kbuild-fixes-v5.10-2' of ↵Linus Torvalds11-14/+19
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Move -Wcast-align to W=3, which tends to be false-positive and there is no tree-wide solution. - Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a preprocessor option and makes sense for .S files as well. - Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings. - Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings. - Fix undesirable line breaks in *.mod files. * tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: avoid split lines in .mod files kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1 kbuild: Hoist '--orphan-handling' into Kconfig Kbuild: do not emit debug info for assembly with LLVM_IAS=1 kbuild: use -fmacro-prefix-map for .S sources Makefile.extrawarn: move -Wcast-align to W=3
2020-12-06mm/zsmalloc.c: drop ZSMALLOC_PGTABLE_MAPPINGMinchan Kim1-1/+0
While I was doing zram testing, I found sometimes decompression failed since the compression buffer was corrupted. With investigation, I found below commit calls cond_resched unconditionally so it could make a problem in atomic context if the task is reschedule. BUG: sleeping function called from invalid context at mm/vmalloc.c:108 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog 3 locks held by memhog/946: #0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160 #1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160 #2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0 CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 Call Trace: unmap_kernel_range_noflush+0x2eb/0x350 unmap_kernel_range+0x14/0x30 zs_unmap_object+0xd5/0xe0 zram_bvec_rw.isra.0+0x38c/0x8e0 zram_rw_page+0x90/0x101 bdev_write_page+0x92/0xe0 __swap_writepage+0x94/0x4a0 pageout+0xe3/0x3a0 shrink_page_list+0xb94/0xd60 shrink_inactive_list+0x158/0x460 We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which contains the offending calling code) from zsmalloc. Even though this option showed some amount improvement(e.g., 30%) in some arm32 platforms, it has been headache to maintain since it have abused APIs[1](e.g., unmap_kernel_range in atomic context). Since we are approaching to deprecate 32bit machines and already made the config option available for only builtin build since v5.8, lastly it has been not default option in zsmalloc, it's time to drop the option for better maintenance. [1] http://lore.kernel.org/linux-mm/20201105170249.387069-1-minchan@kernel.org Fixes: e47110e90584 ("mm/vunmap: add cond_resched() in vunmap_pmd_range") Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Harish Sriram <harish@linux.ibm.com> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201117202916.GA3856507@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-06x86/sev-es: Use new for_each_insn_prefix() macro to loop over prefixes bytesMasami Hiramatsu1-3/+2
Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be: insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Use the new for_each_insn_prefix() macro which does it correctly. Debugged by Kees Cook <keescook@chromium.org>. [ bp: Massage commit message. ] Fixes: 25189d08e516 ("x86/sev-es: Add support for handling IOIO exceptions") Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/160697106089.3146288.2052422845039649176.stgit@devnote2
2020-12-06x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytesMasami Hiramatsu1-5/+5
Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Use the new for_each_insn_prefix() macro which does it correctly. Debugged by Kees Cook <keescook@chromium.org>. [ bp: Massage commit message. ] Fixes: 32d0b95300db ("x86/insn-eval: Add utility functions to get segment selector") Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160697104969.3146288.16329307586428270032.stgit@devnote2
2020-12-06x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytesMasami Hiramatsu2-4/+21
Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Introduce a for_each_insn_prefix() macro for this purpose. Debugged by Kees Cook <keescook@chromium.org>. [ bp: Massage commit message, sync with the respective header in tools/ and drop "we". ] Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints") Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2
2020-12-05Merge tag 'powerpc-5.10-5' of ↵Linus Torvalds9-17/+65
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.10: - Three commits fixing possible missed TLB invalidations for multi-threaded processes when CPUs are hotplugged in and out. - A fix for a host crash triggerable by host userspace (qemu) in KVM on Power9. - A fix for a host crash in machine check handling when running HPT guests on a HPT host. - One commit fixing potential missed TLB invalidations when using the hash MMU on Power9 or later. - A regression fix for machines with CPUs on node 0 but no memory. Thanks to Aneesh Kumar K.V, Cédric Le Goater, Greg Kurz, Milan Mohanty, Milton Miller, Nicholas Piggin, Paul Mackerras, and Srikar Dronamraju" * tag 'powerpc-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s/powernv: Fix memory corruption when saving SLB entries on MCE KVM: PPC: Book3S HV: XIVE: Fix vCPU id sanity check powerpc/numa: Fix a regression on memoryless node 0 powerpc/64s: Trim offlined CPUs from mm_cpumasks kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling powerpc/64s/pseries: Fix hash tlbiel_all_isa300 for guest kernels powerpc/64s: Fix hash ISA v3.0 TLBIEL instruction generation
2020-12-04Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski4-0/+12
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-12-03 The main changes are: 1) Support BTF in kernel modules, from Andrii. 2) Introduce preferred busy-polling, from Björn. 3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh. 4) Memcg-based memory accounting for bpf objects, from Roman. 5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits) selftests/bpf: Fix invalid use of strncat in test_sockmap libbpf: Use memcpy instead of strncpy to please GCC selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module selftests/bpf: Add tp_btf CO-RE reloc test for modules libbpf: Support attachment of BPF tracing programs to kernel modules libbpf: Factor out low-level BPF program loading helper bpf: Allow to specify kernel module BTFs when attaching BPF programs bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF selftests/bpf: Add support for marking sub-tests as skipped selftests/bpf: Add bpf_testmod kernel module for testing libbpf: Add kernel module BTF support for CO-RE relocations libbpf: Refactor CO-RE relocs to not assume a single BTF object libbpf: Add internal helper to load BTF data by FD bpf: Keep module's btf_data_size intact after load bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address() selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP bpf: Adds support for setting window clamp samples/bpf: Fix spelling mistake "recieving" -> "receiving" bpf: Fix cold build of test_progs-no_alu32 ... ==================== Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04usb: ohci-omap: Fix descriptor conversionLinus Walleij1-1/+1
There were a bunch of issues with the patch converting the OMAP1 OSK board to use descriptors for controlling the USB host: - The chip label was incorrect - The GPIO offset was off-by-one - The code should use sleeping accessors This patch tries to fix all issues at the same time. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Fixes: 15d157e87443 ("usb: ohci-omap: Convert to use GPIO descriptors") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201130083033.29435-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski42-283/+329
Conflicts: drivers/net/ethernet/ibm/ibmvnic.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03Merge tag 's390-5.10-6' of ↵Linus Torvalds3-21/+13
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: "One commit is fixing lockdep irq state tracing which broke with -rc6. The other one fixes logical vs physical CPU address mixup in our PCI code. Summary: - fix lockdep irq state tracing - fix logical vs physical CPU address confusion in PCI code" * tag 's390-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix irq state tracing s390/pci: fix CPU address in MSI for directed IRQ
2020-12-03x86/platform/uv: Fix UV4 hub revision adjustmentMike Travis1-1/+1
Currently, UV4 is incorrectly identified as UV4A and UV4A as UV5. Hub chip starts with revision 1, fix it. [ bp: Massage commit message. ] Fixes: 647128f1536e ("x86/platform/uv: Update UV MMRs for UV5") Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Acked-by: Dimitri Sivanich <dimitri.sivanich@hpe.com> Link: https://lkml.kernel.org/r/20201203152252.371199-1-mike.travis@hpe.com
2020-12-03perf/x86/intel: Check PEBS status correctlyStephane Eranian1-1/+1
The kernel cannot disambiguate when 2+ PEBS counters overflow at the same time. This is what the comment for this code suggests. However, I see the comparison is done with the unfiltered p->status which is a copy of IA32_PERF_GLOBAL_STATUS at the time of the sample. This register contains more than the PEBS counter overflow bits. It also includes many other bits which could also be set. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201126110922.317681-2-namhyung@kernel.org
2020-12-03perf/x86/intel: Fix a warning on x86_pmu_stop() with large PEBSNamhyung Kim1-1/+1
The commit 3966c3feca3f ("x86/perf/amd: Remove need to check "running" bit in NMI handler") introduced this. It seems x86_pmu_stop can be called recursively (like when it losts some samples) like below: x86_pmu_stop intel_pmu_disable_event (x86_pmu_disable) intel_pmu_pebs_disable intel_pmu_drain_pebs_nhm (x86_pmu_drain_pebs_buffer) x86_pmu_stop While commit 35d1ce6bec13 ("perf/x86/intel/ds: Fix x86_pmu_stop warning for large PEBS") fixed it for the normal cases, there's another path to call x86_pmu_stop() recursively when a PEBS error was detected (like two or more counters overflowed at the same time). Like in the Kan's previous fix, we can skip the interrupt accounting for large PEBS, so check the iregs which is set for PMI only. Fixes: 3966c3feca3f ("x86/perf/amd: Remove need to check "running" bit in NMI handler") Reported-by: John Sperbeck <jsperbeck@google.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201126110922.317681-1-namhyung@kernel.org
2020-12-02Merge tag 'arm64-fixes' of ↵Linus Torvalds12-181/+243
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "I'm sad to say that we've got an unusually large arm64 fixes pull for rc7 which addresses numerous significant instrumentation issues with our entry code. Without these patches, lockdep is hopelessly unreliable in some configurations [1,2] and syzkaller is therefore not a lot of use because it's so noisy. Although much of this has always been broken, it appears to have been exposed more readily by other changes such as 044d0d6de9f5 ("lockdep: Only trace IRQ edges") and general lockdep improvements around IRQ tracing and NMIs. Fixing this properly required moving much of the instrumentation hooks from our entry assembly into C, which Mark has been working on for the last few weeks. We're not quite ready to move to the recently added generic functions yet, but the code here has been deliberately written to mimic that closely so we can look at cleaning things up once we have a bit more breathing room. Having said all that, the second version of these patches was posted last week and I pushed it into our CI (kernelci and cki) along with a commit which forced on PROVE_LOCKING, NOHZ_FULL and CONTEXT_TRACKING_FORCE. The result? We found a real bug in the md/raid10 code [3]. Oh, and there's also a really silly typo patch that's unrelated. Summary: - Fix numerous issues with instrumentation and exception entry - Fix hideous typo in unused register field definition" [1] https://lore.kernel.org/r/CACT4Y+aAzoJ48Mh1wNYD17pJqyEcDnrxGfApir=-j171TnQXhw@mail.gmail.com [2] https://lore.kernel.org/r/20201119193819.GA2601289@elver.google.com [3] https://lore.kernel.org/r/94c76d5e-466a-bc5f-e6c2-a11b65c39f83@redhat.com * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mte: Fix typo in macro definition arm64: entry: fix EL1 debug transitions arm64: entry: fix NMI {user, kernel}->kernel transitions arm64: entry: fix non-NMI kernel<->kernel transitions arm64: ptrace: prepare for EL1 irq/rcu tracking arm64: entry: fix non-NMI user<->kernel transitions arm64: entry: move el1 irq/nmi logic to C arm64: entry: prepare ret_to_user for function call arm64: entry: move enter_from_user_mode to entry-common.c arm64: entry: mark entry code as noinstr arm64: mark idle code as noinstr arm64: syscall: exit userspace before unmasking exceptions
2020-12-02s390: fix irq state tracingHeiko Carstens2-18/+2
With commit 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs tracing") common code calls arch_cpu_idle() with a lockdep state that tells irqs are on. This doesn't work very well for s390: psw_idle() will enable interrupts to wait for an interrupt. As soon as an interrupt occurs the interrupt handler will verify if the old context was psw_idle(). If that is the case the interrupt enablement bits in the old program status word will be cleared. A subsequent test in both the external as well as the io interrupt handler checks if in the old context interrupts were enabled. Due to the above patching of the old program status word it is assumed the old context had interrupts disabled, and therefore a call to TRACE_IRQS_OFF (aka trace_hardirqs_off_caller) is skipped. Which in turn makes lockdep incorrectly "think" that interrupts are enabled within the interrupt handler. Fix this by unconditionally calling TRACE_IRQS_OFF when entering interrupt handlers. Also call unconditionally TRACE_IRQS_ON when leaving interrupts handlers. This leaves the special psw_idle() case, which now returns with interrupts disabled, but has an "irqs on" lockdep state. So callers of psw_idle() must adjust the state on their own, if required. This is currently only __udelay_disabled(). Fixes: 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs tracing") Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/pci: fix CPU address in MSI for directed IRQAlexander Gordeev1-3/+11
The directed MSIs are delivered to CPUs whose address is written to the MSI message address. The current code assumes that a CPU logical number (as it is seen by the kernel) is also the CPU address. The above assumption is not correct, as the CPU address is rather the value returned by STAP instruction. That value does not necessarily match the kernel logical CPU number. Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02powerpc/64s/powernv: Fix memory corruption when saving SLB entries on MCENicholas Piggin1-2/+7
This can be hit by an HPT guest running on an HPT host and bring down the host, so it's quite important to fix. Fixes: 7290f3b3d3e6 ("powerpc/64s/powernv: machine check dump SLB contents") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201128070728.825934-2-npiggin@gmail.com
2020-12-01x86/resctrl: Fix AMD L3 QOS CDP enable/disableBabu Moger3-2/+14
When the AMD QoS feature CDP (code and data prioritization) is enabled or disabled, the CDP bit in MSR 0000_0C81 is written on one of the CPUs in an L3 domain (core complex). That is not correct - the CDP bit needs to be updated on all the logical CPUs in the domain. This was not spelled out clearly in the spec earlier. The specification has been updated and the updated document, "AMD64 Technology Platform Quality of Service Extensions Publication # 56375 Revision: 1.02 Issue Date: October 2020" is available now. Refer the section: Code and Data Prioritization. Fix the issue by adding a new flag arch_has_per_cpu_cfg in rdt_cache data structure. The documentation can be obtained at: https://developer.amd.com/wp-content/resources/56375.pdf Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 [ bp: Massage commit message. ] Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature") Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/160675180380.15628.3309402017215002347.stgit@bmoger-ubuntu
2020-12-01kbuild: Hoist '--orphan-handling' into KconfigNathan Chancellor11-14/+19
Currently, '--orphan-handling=warn' is spread out across four different architectures in their respective Makefiles, which makes it a little unruly to deal with in case it needs to be disabled for a specific linker version (in this case, ld.lld 10.0.1). To make it easier to control this, hoist this warning into Kconfig and the main Makefile so that disabling it is simpler, as the warning will only be enabled in a couple places (main Makefile and a couple of compressed boot folders that blow away LDFLAGS_vmlinx) and making it conditional is easier due to Kconfig syntax. One small additional benefit of this is saving a call to ld-option on incremental builds because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN. To keep the list of supported architectures the same, introduce CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to gain this automatically after all of the sections are specified and size asserted. A special thanks to Kees Cook for the help text on this config. Link: https://github.com/ClangBuiltLinux/linux/issues/1187 Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-01KVM: PPC: Book3S HV: XIVE: Fix vCPU id sanity checkGreg Kurz1-5/+2
Commit 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") updated kvmppc_xive_vcpu_id_valid() in a way that allows userspace to trigger an assertion in skiboot and crash the host: [ 696.186248988,3] XIVE[ IC 08 ] eq_blk != vp_blk (0 vs. 1) for target 0x4300008c/0 [ 696.186314757,0] Assert fail: hw/xive.c:2370:0 [ 696.186342458,0] Aborting! xive-kvCPU 0043 Backtrace: S: 0000000031e2b8f0 R: 0000000030013840 .backtrace+0x48 S: 0000000031e2b990 R: 000000003001b2d0 ._abort+0x4c S: 0000000031e2ba10 R: 000000003001b34c .assert_fail+0x34 S: 0000000031e2ba90 R: 0000000030058984 .xive_eq_for_target.part.20+0xb0 S: 0000000031e2bb40 R: 0000000030059fdc .xive_setup_silent_gather+0x2c S: 0000000031e2bc20 R: 000000003005a334 .opal_xive_set_vp_info+0x124 S: 0000000031e2bd20 R: 00000000300051a4 opal_entry+0x134 --- OPAL call token: 0x8a caller R1: 0xc000001f28563850 --- XIVE maintains the interrupt context state of non-dispatched vCPUs in an internal VP structure. We allocate a bunch of those on startup to accommodate all possible vCPUs. Each VP has an id, that we derive from the vCPU id for efficiency: static inline u32 kvmppc_xive_vp(struct kvmppc_xive *xive, u32 server) { return xive->vp_base + kvmppc_pack_vcpu_id(xive->kvm, server); } The KVM XIVE device used to allocate KVM_MAX_VCPUS VPs. This was limitting the number of concurrent VMs because the VP space is limited on the HW. Since most of the time, VMs run with a lot less vCPUs, commit 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") gave the possibility for userspace to tune the size of the VP block through the KVM_DEV_XIVE_NR_SERVERS attribute. The check in kvmppc_pack_vcpu_id() was changed from cpu < KVM_MAX_VCPUS * xive->kvm->arch.emul_smt_mode to cpu < xive->nr_servers * xive->kvm->arch.emul_smt_mode The previous check was based on the fact that the VP block had KVM_MAX_VCPUS entries and that kvmppc_pack_vcpu_id() guarantees that packed vCPU ids are below KVM_MAX_VCPUS. We've changed the size of the VP block, but kvmppc_pack_vcpu_id() has nothing to do with it and it certainly doesn't ensure that the packed vCPU ids are below xive->nr_servers. kvmppc_xive_vcpu_id_valid() might thus return true when the VM was configured with a non-standard VSMT mode, even if the packed vCPU id is higher than what we expect. We end up using an unallocated VP id, which confuses OPAL. The assert in OPAL is probably abusive and should be converted to a regular error that the kernel can handle, but we shouldn't really use broken VP ids in the first place. Fix kvmppc_xive_vcpu_id_valid() so that it checks the packed vCPU id is below xive->nr_servers, which is explicitly what we want. Fixes: 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/160673876747.695514.1809676603724514920.stgit@bahia.lan
2020-12-01arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-idHeinrich Schuchardt1-1/+1
Since commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") network is broken on the NanoPi Neo Plus2. This patch changes the phy-mode to use internal delays both for RX and TX as has been done for other boards affected by the same commit. Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201129194512.1475586-1-xypron.glpk@gmx.de
2020-12-01arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-idHeinrich Schuchardt1-1/+1
Since commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") iSCSI booting fails on the Pine A64 LTS. This patch changes the phy-mode to use internal delays both for RX and TX as has been done for other boards affected by the same commit. Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201129162627.1244808-1-xypron.glpk@gmx.de
2020-12-01ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pinBernd Bauer1-1/+1
Use the correct pin for the i2c scl signal else we can't access the SoM eeprom. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Signed-off-by: Bernd Bauer <bernd.bauer@anton-paar.com> [m.felsch@pengutronix.de: Adapt commit message] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-12-01ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrpFabio Estevam1-1/+0
Since commit 8ad2d1dcce54 ("ARM: dts: imx6qdl-wandboard: Add OV5645 camera support") the PAD_GPIO_6 is used for providing the camera sensor clock. Remove it from the enetgrp to fix the following IOMXU conflict: [ 9.972414] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_GPIO_6 already requested by 2188000.ethernet; cannot claim for 1-003c [ 9.983857] imx6q-pinctrl 20e0000.pinctrl: pin-140 (1-003c) status -22 [ 9.990514] imx6q-pinctrl 20e0000.pinctrl: could not request pin 140 (MX6Q_PAD_GPIO_6) from group ov5645grp on device 20e0000.pinctrl Fixes: 8ad2d1dcce54 ("ARM: dts: imx6qdl-wandboard: Add OV5645 camera support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-12-01ARM: imx: Use correct SRC base addressRobert Karszniewicz1-1/+1
Commit 4a4fb66119eb ("ARM: imx: Add missing of_node_put()") accidentally forgot to rename a variable, which caused the wrong address to be used and, in our case, the ULL getting falsely identified as ULZ. Fixes: 4a4fb66119eb ("ARM: imx: Add missing of_node_put()") Signed-off-by: Robert Karszniewicz <r.karszniewicz@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-12-01net: Add SO_BUSY_POLL_BUDGET socket optionBjörn Töpel4-0/+4
This option lets a user set a per socket NAPI budget for busy-polling. If the options is not set, it will use the default of 8. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20201130185205.196029-3-bjorn.topel@gmail.com
2020-12-01net: Introduce preferred busy-pollingBjörn Töpel4-0/+8
The existing busy-polling mode, enabled by the SO_BUSY_POLL socket option or system-wide using the /proc/sys/net/core/busy_read knob, is an opportunistic. That means that if the NAPI context is not scheduled, it will poll it. If, after busy-polling, the budget is exceeded the busy-polling logic will schedule the NAPI onto the regular softirq handling. One implication of the behavior above is that a busy/heavy loaded NAPI context will never enter/allow for busy-polling. Some applications prefer that most NAPI processing would be done by busy-polling. This series adds a new socket option, SO_PREFER_BUSY_POLL, that works in concert with the napi_defer_hard_irqs and gro_flush_timeout knobs. The napi_defer_hard_irqs and gro_flush_timeout knobs were introduced in commit 6f8b12d661d0 ("net: napi: add hard irqs deferral feature"), and allows for a user to defer interrupts to be enabled and instead schedule the NAPI context from a watchdog timer. When a user enables the SO_PREFER_BUSY_POLL, again with the other knobs enabled, and the NAPI context is being processed by a softirq, the softirq NAPI processing will exit early to allow the busy-polling to be performed. If the application stops performing busy-polling via a system call, the watchdog timer defined by gro_flush_timeout will timeout, and regular softirq handling will resume. In summary; Heavy traffic applications that prefer busy-polling over softirq processing should use this option. Example usage: $ echo 2 | sudo tee /sys/class/net/ens785f1/napi_defer_hard_irqs $ echo 200000 | sudo tee /sys/class/net/ens785f1/gro_flush_timeout Note that the timeout should be larger than the userspace processing window, otherwise the watchdog will timeout and fall back to regular softirq processing. Enable the SO_BUSY_POLL/SO_PREFER_BUSY_POLL options on your socket. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20201130185205.196029-2-bjorn.topel@gmail.com
2020-11-30arm64: mte: Fix typo in macro definitionVincenzo Frascino1-1/+1
UL in the definition of SYS_TFSR_EL1_TF1 was misspelled causing compilation issues when trying to implement in kernel MTE async mode. Fix the macro correcting the typo. Note: MTE async mode will be introduced with a future series. Fixes: c058b1c4a5ea ("arm64: mte: system register definitions") Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20201130170709.22309-1-vincenzo.frascino@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: fix EL1 debug transitionsMark Rutland2-25/+26
In debug_exception_enter() and debug_exception_exit() we trace hardirqs on/off while RCU isn't guaranteed to be watching, and we don't save and restore the hardirq state, and so may return with this having changed. Handle this appropriately with new entry/exit helpers which do the bare minimum to ensure this is appropriately maintained, without marking debug exceptions as NMIs. These are placed in entry-common.c with the other entry/exit helpers. In future we'll want to reconsider whether some debug exceptions should be NMIs, but this will require a significant refactoring, and for now this should prevent issues with lockdep and RCU. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marins <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-12-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: fix NMI {user, kernel}->kernel transitionsMark Rutland4-10/+48
Exceptions which can be taken at (almost) any time are consdiered to be NMIs. On arm64 that includes: * SDEI events * GICv3 Pseudo-NMIs * Kernel stack overflows * Unexpected/unhandled exceptions ... but currently debug exceptions (BRKs, breakpoints, watchpoints, single-step) are not considered NMIs. As these can be taken at any time, kernel features (lockdep, RCU, ftrace) may not be in a consistent kernel state. For example, we may take an NMI from the idle code or partway through an entry/exit path. While nmi_enter() and nmi_exit() handle most of this state, notably they don't save/restore the lockdep state across an NMI being taken and handled. When interrupts are enabled and an NMI is taken, lockdep may see interrupts become disabled within the NMI code, but not see interrupts become enabled when returning from the NMI, leaving lockdep believing interrupts are disabled when they are actually disabled. The x86 code handles this in idtentry_{enter,exit}_nmi(), which will shortly be moved to the generic entry code. As we can't use either yet, we copy the x86 approach in arm64-specific helpers. All the NMI entrypoints are marked as noinstr to prevent any instrumentation handling code being invoked before the state has been corrected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-11-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: fix non-NMI kernel<->kernel transitionsMark Rutland2-3/+67
There are periods in kernel mode when RCU is not watching and/or the scheduler tick is disabled, but we can still take exceptions such as interrupts. The arm64 exception handlers do not account for this, and it's possible that RCU is not watching while an exception handler runs. The x86/generic entry code handles this by ensuring that all (non-NMI) kernel exception handlers call irqentry_enter() and irqentry_exit(), which handle RCU, lockdep, and IRQ flag tracing. We can't yet move to the generic entry code, and already hadnle the user<->kernel transitions elsewhere, so we add new kernel<->kernel transition helpers alog the lines of the generic entry code. Since we now track interrupts becoming masked when an exception is taken, local_daif_inherit() is modified to track interrupts becoming re-enabled when the original context is inherited. To balance the entry/exit paths, each handler masks all DAIF exceptions before exit_to_kernel_mode(). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-10-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: ptrace: prepare for EL1 irq/rcu trackingMark Rutland1-0/+4
Exceptions from EL1 may be taken when RCU isn't watching (e.g. in idle sequences), or when the lockdep hardirqs transiently out-of-sync with the hardware state (e.g. in the middle of local_irq_enable()). To correctly handle these cases, we'll need to save/restore this state across some exceptions taken from EL1. A series of subsequent patches will update EL1 exception handlers to handle this. In preparation for this, and to avoid dependencies between those patches, this patch adds two new fields to struct pt_regs so that exception handlers can track this state. Note that this is placed in pt_regs as some entry/exit sequences such as el1_irq are invoked from assembly, which makes it very difficult to add a separate structure as with the irqentry_state used by x86. We can separate this once more of the exception logic is moved to C. While the fields only need to be bool, they are both made u64 to keep pt_regs 16-byte aligned. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-9-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: fix non-NMI user<->kernel transitionsMark Rutland5-48/+51
When built with PROVE_LOCKING, NO_HZ_FULL, and CONTEXT_TRACKING_FORCE will WARN() at boot time that interrupts are enabled when we call context_tracking_user_enter(), despite the DAIF flags indicating that IRQs are masked. The problem is that we're not tracking IRQ flag changes accurately, and so lockdep believes interrupts are enabled when they are not (and vice-versa). We can shuffle things so to make this more accurate. For kernel->user transitions there are a number of constraints we need to consider: 1) When we call __context_tracking_user_enter() HW IRQs must be disabled and lockdep must be up-to-date with this. 2) Userspace should be treated as having IRQs enabled from the PoV of both lockdep and tracing. 3) As context_tracking_user_enter() stops RCU from watching, we cannot use RCU after calling it. 4) IRQ flag tracing and lockdep have state that must be manipulated before RCU is disabled. ... with similar constraints applying for user->kernel transitions, with the ordering reversed. The generic entry code has enter_from_user_mode() and exit_to_user_mode() helpers to handle this. We can't use those directly, so we add arm64 copies for now (without the instrumentation markers which aren't used on arm64). These replace the existing user_exit() and user_exit_irqoff() calls spread throughout handlers, and the exception unmasking is left as-is. Note that: * The accounting for debug exceptions from userspace now happens in el0_dbg() and ret_to_user(), so this is removed from debug_exception_enter() and debug_exception_exit(). As user_exit_irqoff() wakes RCU, the userspace-specific check is removed. * The accounting for syscalls now happens in el0_svc(), el0_svc_compat(), and ret_to_user(), so this is removed from el0_svc_common(). This does not adversely affect the workaround for erratum 1463225, as this does not depend on any of the state tracking. * In ret_to_user() we mask interrupts with local_daif_mask(), and so we need to inform lockdep and tracing. Here a trace_hardirqs_off() is sufficient and safe as we have not yet exited kernel context and RCU is usable. * As PROVE_LOCKING selects TRACE_IRQFLAGS, the ifdeferry in entry.S only needs to check for the latter. * EL0 SError handling will be dealt with in a subsequent patch, as this needs to be treated as an NMI. Prior to this patch, booting an appropriately-configured kernel would result in spats as below: | DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled()) | WARNING: CPU: 2 PID: 1 at kernel/locking/lockdep.c:5280 check_flags.part.54+0x1dc/0x1f0 | Modules linked in: | CPU: 2 PID: 1 Comm: init Not tainted 5.10.0-rc3 #3 | Hardware name: linux,dummy-virt (DT) | pstate: 804003c5 (Nzcv DAIF +PAN -UAO -TCO BTYPE=--) | pc : check_flags.part.54+0x1dc/0x1f0 | lr : check_flags.part.54+0x1dc/0x1f0 | sp : ffff80001003bd80 | x29: ffff80001003bd80 x28: ffff66ce801e0000 | x27: 00000000ffffffff x26: 00000000000003c0 | x25: 0000000000000000 x24: ffffc31842527258 | x23: ffffc31842491368 x22: ffffc3184282d000 | x21: 0000000000000000 x20: 0000000000000001 | x19: ffffc318432ce000 x18: 0080000000000000 | x17: 0000000000000000 x16: ffffc31840f18a78 | x15: 0000000000000001 x14: ffffc3184285c810 | x13: 0000000000000001 x12: 0000000000000000 | x11: ffffc318415857a0 x10: ffffc318406614c0 | x9 : ffffc318415857a0 x8 : ffffc31841f1d000 | x7 : 647261685f706564 x6 : ffffc3183ff7c66c | x5 : ffff66ce801e0000 x4 : 0000000000000000 | x3 : ffffc3183fe00000 x2 : ffffc31841500000 | x1 : e956dc24146b3500 x0 : 0000000000000000 | Call trace: | check_flags.part.54+0x1dc/0x1f0 | lock_is_held_type+0x10c/0x188 | rcu_read_lock_sched_held+0x70/0x98 | __context_tracking_enter+0x310/0x350 | context_tracking_enter.part.3+0x5c/0xc8 | context_tracking_user_enter+0x6c/0x80 | finish_ret_to_user+0x2c/0x13cr Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-8-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: move el1 irq/nmi logic to CMark Rutland4-45/+22
In preparation for reworking the EL1 irq/nmi entry code, move the existing logic to C. We no longer need the asm_nmi_enter() and asm_nmi_exit() wrappers, so these are removed. The new C functions are marked noinstr, which prevents compiler instrumentation and runtime probing. In subsequent patches we'll want the new C helpers to be called in all cases, so we don't bother wrapping the calls with ifdeferry. Even when the new C functions are stubs the trivial calls are unlikely to have a measurable impact on the IRQ or NMI paths anyway. Prototypes are added to <asm/exception.h> as otherwise (in some configurations) GCC will complain about the lack of a forward declaration. We already do this for existing function, e.g. enter_from_user_mode(). The new helpers are marked as noinstr (which prevents all instrumentation, tracing, and kprobes). Otherwise, there should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-7-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-30arm64: entry: prepare ret_to_user for function callMark Rutland1-4/+5
In a subsequent patch ret_to_user will need to make a C function call (in some configurations) which may clobber x0-x18 at the start of the finish_ret_to_user block, before enable_step_tsk consumes the flags loaded into x1. In preparation for this, let's load the flags into x19, which is preserved across C function calls. This avoids a redundant reload of the flags and ensures we operate on a consistent shapshot regardless. There should be no functional change as a result of this patch. At this point of the entry/exit paths we only need to preserve x28 (tsk) and the sp, and x19 is free for this use. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130115950.22492-6-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-18 05:27:30 +0300