summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2022-08-28Merge tag 'x86-urgent-2022-08-28' of ↵Linus Torvalds12-72/+150
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: - Fix PAT on Xen, which caused i915 driver failures - Fix compat INT 80 entry crash on Xen PV guests - Fix 'MMIO Stale Data' mitigation status reporting on older Intel CPUs - Fix RSB stuffing regressions - Fix ORC unwinding on ftrace trampolines - Add Intel Raptor Lake CPU model number - Fix (work around) a SEV-SNP bootloader bug providing bogus values in boot_params->cc_blob_address, by ignoring the value on !SEV-SNP bootups. - Fix SEV-SNP early boot failure - Fix the objtool list of noreturn functions and annotate snp_abort(), which bug confused objtool on gcc-12. - Fix the documentation for retbleed * tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/ABI: Mention retbleed vulnerability info file for sysfs x86/sev: Mark snp_abort() noreturn x86/sev: Don't use cc_platform_has() for early SEV-SNP calls x86/boot: Don't propagate uninitialized boot_params->cc_blob_address x86/cpu: Add new Raptor Lake CPU model number x86/unwind/orc: Unwind ftrace trampolines with correct ORC entry x86/nospec: Fix i386 RSB stuffing x86/nospec: Unwreck the RSB stuffing x86/bugs: Add "unknown" reporting for MMIO Stale Data x86/entry: Fix entry_INT80_compat for Xen PV guests x86/PAT: Have pat_enabled() properly reflect state when running on Xen
2022-08-28Merge tag 'perf-urgent-2022-08-28' of ↵Linus Torvalds4-7/+36
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf fixes from Ingo Molnar: "Misc fixes: an Arch-LBR fix, a PEBS enumeration fix, an Intel DS fix, PEBS constraints fix on Alder Lake CPUs and an Intel uncore PMU fix" * tag 'perf-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Fix broken read_counter() for SNB IMC PMU perf/x86/intel: Fix pebs event constraints for ADL perf/x86/intel/ds: Fix precise store latency handling perf/x86/core: Set pebs_capable and PMU_FL_PEBS_ALL for the Baseline perf/x86/lbr: Enable the branch type for the Arch LBR by default
2022-08-28Merge tag 's390-6.0-2' of ↵Linus Torvalds2-7/+19
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix double free of guarded storage and runtime instrumentation control blocks on fork() failure - Fix triggering write fault when VMA does not allow VM_WRITE * tag 's390-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: do not trigger write fault when vma does not allow VM_WRITE s390: fix double free of GS and RI CBs on fork() failure
2022-08-28Merge tag 'for-linus-6.0-rc3-tag' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - two minor cleanups - a fix of the xen/privcmd driver avoiding a possible NULL dereference in an error case * tag 'for-linus-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/privcmd: fix error exit of privcmd_ioctl_dm_op() xen: move from strlcpy with unused retval to strscpy xen: x86: remove setting the obsolete config XEN_MAX_DOMAIN_MEMORY
2022-08-27provide arch_test_bit_acquire for architectures that define test_bitMikulas Patocka6-33/+25
Some architectures define their own arch_test_bit and they also need arch_test_bit_acquire, otherwise they won't compile. We also clean up the code by using the generic test_bit if that is equivalent to the arch-specific version. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: 8238b4579866 ("wait_on_bit: add an acquire memory barrier") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-27perf/x86/intel/uncore: Fix broken read_counter() for SNB IMC PMUStephane Eranian1-1/+17
Existing code was generating bogus counts for the SNB IMC bandwidth counters: $ perf stat -a -I 1000 -e uncore_imc/data_reads/,uncore_imc/data_writes/ 1.000327813 1,024.03 MiB uncore_imc/data_reads/ 1.000327813 20.73 MiB uncore_imc/data_writes/ 2.000580153 261,120.00 MiB uncore_imc/data_reads/ 2.000580153 23.28 MiB uncore_imc/data_writes/ The problem was introduced by commit: 07ce734dd8ad ("perf/x86/intel/uncore: Clean up client IMC") Where the read_counter callback was replace to point to the generic uncore_mmio_read_counter() function. The SNB IMC counters are freerunnig 32-bit counters laid out contiguously in MMIO. But uncore_mmio_read_counter() is using a readq() call to read from MMIO therefore reading 64-bit from MMIO. Although this is okay for the uncore_perf_event_update() function because it is shifting the value based on the actual counter width to compute a delta, it is not okay for the uncore_pmu_event_start() which is simply reading the counter and therefore priming the event->prev_count with a bogus value which is responsible for causing bogus deltas in the perf stat command above. The fix is to reintroduce the custom callback for read_counter for the SNB IMC PMU and use readl() instead of readq(). With the change the output of perf stat is back to normal: $ perf stat -a -I 1000 -e uncore_imc/data_reads/,uncore_imc/data_writes/ 1.000120987 296.94 MiB uncore_imc/data_reads/ 1.000120987 138.42 MiB uncore_imc/data_writes/ 2.000403144 175.91 MiB uncore_imc/data_reads/ 2.000403144 68.50 MiB uncore_imc/data_writes/ Fixes: 07ce734dd8ad ("perf/x86/intel/uncore: Clean up client IMC") Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20220803160031.1379788-1-eranian@google.com
2022-08-26Merge tag 'arm64-fixes' of ↵Linus Torvalds16-53/+117
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A bumper crop of arm64 fixes for -rc3. The largest change is fixing our parsing of the 'rodata=full' command line option, which kstrtobool() started treating as 'rodata=false'. The fix actually makes the parsing of that option much less fragile and updates the documentation at the same time. We still have a boot issue pending when KASLR is disabled at compile time, but there's a fresh fix on the list which I'll send next week if it holds up to testing. Summary: - Fix workaround for Cortex-A76 erratum #1286807 - Add workaround for AMU erratum #2457168 on Cortex-A510 - Drop reference to removed CONFIG_ARCH_RANDOM #define - Fix parsing of the "rodata=full" cmdline option - Fix a bunch of issues in the SME register state switching and sigframe code - Fix incorrect extraction of the CTR_EL0.CWG register field - Fix ACPI cache topology probing when the PPTT is not present - Trivial comment and whitespace fixes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/sme: Don't flush SVE register state when handling SME traps arm64/sme: Don't flush SVE register state when allocating SME storage arm64/signal: Flush FPSIMD register state when disabling streaming mode arm64/signal: Raise limit on stack frames arm64/cache: Fix cache_type_cwg() for register generation arm64/sysreg: Guard SYS_FIELD_ macros for asm arm64/sysreg: Directly include bitfield.h arm64: cacheinfo: Fix incorrect assignment of signed error value to unsigned fw_level arm64: errata: add detection for AMEVCNTR01 incrementing incorrectly arm64: fix rodata=full arm64: Fix comment typo docs/arm64: elf_hwcaps: unify newlines in HWCAP lists arm64: adjust KASLR relocation after ARCH_RANDOM removal arm64: Fix match_list for erratum 1286807 on Arm Cortex-A76
2022-08-26Merge tag 'riscv-for-linus-6.0-rc3' of ↵Linus Torvalds7-10/+19
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A handful of fixes for the Microchip device trees - A pair of fixes to eliminate build warnings * tag 'riscv-for-linus-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: dts: microchip: mpfs: remove pci axi address translation property riscv: dts: microchip: mpfs: remove bogus card-detect-delay riscv: dts: microchip: mpfs: remove ti,fifo-depth property riscv: dts: microchip: mpfs: fix incorrect pcie child node name riscv: traps: add missing prototype riscv: signal: fix missing prototype warning riscv: dts: microchip: correct L2 cache interrupts
2022-08-26Merge tag 'loongarch-fixes-6.0-1' of ↵Linus Torvalds13-98/+164
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix a bunch of build errors/warnings, a poweroff error and an unbalanced locking in do_page_fault()" * tag 'loongarch-fixes-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: mm: Avoid unnecessary page fault retires on shared memory types LoongArch: Add subword xchg/cmpxchg emulation LoongArch: Cleanup headers to avoid circular dependency LoongArch: Cleanup reset routines with new API LoongArch: Fix build warnings in VDSO LoongArch: Select PCI_QUIRKS to avoid build error
2022-08-26wait_on_bit: add an acquire memory barrierMikulas Patocka1-0/+21
There are several places in the kernel where wait_on_bit is not followed by a memory barrier (for example, in drivers/md/dm-bufio.c:new_read). On architectures with weak memory ordering, it may happen that memory accesses that follow wait_on_bit are reordered before wait_on_bit and they may return invalid data. Fix this class of bugs by introducing a new function "test_bit_acquire" that works like test_bit, but has acquire memory ordering semantics. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-26Merge branch 'riscv-variable_fixes_without_kvm' of ↵Palmer Dabbelt4-1/+17
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux.git into fixes This contains a pair of fixes for build-time warnings. * 'riscv-variable_fixes_without_kvm' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux.git: riscv: traps: add missing prototype riscv: signal: fix missing prototype warning
2022-08-26Merge tag 'dt-fixes-for-palmer-6.0-rc3' of ↵Palmer Dabbelt3-9/+2
git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git into fixes Microchip RISC-V devicetree fixes for 6.0-rc3 Two sets of fixes this time around: - A fix for the interrupt ordering of the l2-cache controller. If the driver is enabled, it would spam the console /constantly/, rendering the system useless. - General cleanup for some bogus properties in the dt, part of my quest for zero dtbs_check warnings. On that note, the interrupt ordering adds a dtbs_check warning - but I considered that fixing the potentially useless system was more of a priority. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'dt-fixes-for-palmer-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git: riscv: dts: microchip: mpfs: remove pci axi address translation property riscv: dts: microchip: mpfs: remove bogus card-detect-delay riscv: dts: microchip: mpfs: remove ti,fifo-depth property riscv: dts: microchip: mpfs: fix incorrect pcie child node name riscv: dts: microchip: correct L2 cache interrupts
2022-08-25x86/sev: Mark snp_abort() noreturnBorislav Petkov2-2/+2
Mark both the function prototype and definition as noreturn in order to prevent the compiler from doing transformations which confuse objtool like so: vmlinux.o: warning: objtool: sme_enable+0x71: unreachable instruction This triggers with gcc-12. Add it and sev_es_terminate() to the objtool noreturn tracking array too. Sort it while at it. Suggested-by: Michael Matz <matz@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220824152420.20547-1-bp@alien8.de
2022-08-25s390/mm: do not trigger write fault when vma does not allow VM_WRITEGerald Schaefer1-1/+3
For non-protection pXd_none() page faults in do_dat_exception(), we call do_exception() with access == (VM_READ | VM_WRITE | VM_EXEC). In do_exception(), vma->vm_flags is checked against that before calling handle_mm_fault(). Since commit 92f842eac7ee3 ("[S390] store indication fault optimization"), we call handle_mm_fault() with FAULT_FLAG_WRITE, when recognizing that it was a write access. However, the vma flags check is still only checking against (VM_READ | VM_WRITE | VM_EXEC), and therefore also calling handle_mm_fault() with FAULT_FLAG_WRITE in cases where the vma does not allow VM_WRITE. Fix this by changing access check in do_exception() to VM_WRITE only, when recognizing write access. Link: https://lkml.kernel.org/r/20220811103435.188481-3-david@redhat.com Fixes: 92f842eac7ee3 ("[S390] store indication fault optimization") Cc: <stable@vger.kernel.org> Reported-by: David Hildenbrand <david@redhat.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-08-25s390: fix double free of GS and RI CBs on fork() failureBrian Foster1-6/+16
The pointers for guarded storage and runtime instrumentation control blocks are stored in the thread_struct of the associated task. These pointers are initially copied on fork() via arch_dup_task_struct() and then cleared via copy_thread() before fork() returns. If fork() happens to fail after the initial task dup and before copy_thread(), the newly allocated task and associated thread_struct memory are freed via free_task() -> arch_release_task_struct(). This results in a double free of the guarded storage and runtime info structs because the fields in the failed task still refer to memory associated with the source task. This problem can manifest as a BUG_ON() in set_freepointer() (with CONFIG_SLAB_FREELIST_HARDENED enabled) or KASAN splat (if enabled) when running trinity syscall fuzz tests on s390x. To avoid this problem, clear the associated pointer fields in arch_dup_task_struct() immediately after the new task is copied. Note that the RI flag is still cleared in copy_thread() because it resides in thread stack memory and that is where stack info is copied. Signed-off-by: Brian Foster <bfoster@redhat.com> Fixes: 8d9047f8b967c ("s390/runtime instrumentation: simplify task exit handling") Fixes: 7b83c6297d2fc ("s390/guarded storage: simplify task exit handling") Cc: <stable@vger.kernel.org> # 4.15 Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20220816155407.537372-1-bfoster@redhat.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-08-25xen: x86: remove setting the obsolete config XEN_MAX_DOMAIN_MEMORYLukas Bulwahn1-1/+0
Commit c70727a5bc18 ("xen: allow more than 512 GB of RAM for 64 bit pv-domains") from July 2015 replaces the config XEN_MAX_DOMAIN_MEMORY with a new config XEN_512GB, but misses to adjust arch/x86/configs/xen.config. As XEN_512GB defaults to yes, there is no need to explicitly set any config in xen.config. Just remove setting the obsolete config XEN_MAX_DOMAIN_MEMORY. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220817044333.22310-1-lukas.bulwahn@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-25LoongArch: mm: Avoid unnecessary page fault retires on shared memory typesHuacai Chen1-0/+4
Commit d92725256b4f22d0 ("mm: avoid unnecessary page fault retires on shared memory types") modifies do_page_fault() to handle the VM_FAULT_ COMPLETED case, but forget to change for LoongArch, so fix it as other architectures does. Fixes: d92725256b4f22d0 ("mm: avoid unnecessary page fault retires on shared memory types") Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-25LoongArch: Add subword xchg/cmpxchg emulationHuacai Chen2-1/+105
LoongArch only support 32-bit/64-bit xchg/cmpxchg in native. But percpu operation, qspinlock and some drivers need 8-bit/16-bit xchg/cmpxchg. We add subword xchg/cmpxchg emulation in this patch because the emulation has better performance than the generic implementation (on NUMA system), and it can fix some build errors meanwhile [1]. LoongArch's guarantee for forward progress (avoid many ll/sc happening at the same time and no one succeeds): We have the "exclusive access (with timeout) of ll" feature to avoid simultaneous ll (which also blocks other memory load/store on the same address), and the "random delay of sc" feature to avoid simultaneous sc. It is a mandatory requirement for multi-core LoongArch processors to implement such features, only except those single-core and dual-core processors (they also don't support multi-chip interconnection). Feature bits are introduced in CPUCFG3, bit 3 and bit 4 [2]. [1] https://lore.kernel.org/loongarch/CAAhV-H6vvkuOzy8OemWdYK3taj5Jn3bFX0ZTwE=twM8ywpBUYA@mail.gmail.com/T/#t [2] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#_cpucfg Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Rui Wang <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-25LoongArch: Cleanup headers to avoid circular dependencyHuacai Chen5-33/+22
When enable GENERIC_IOREMAP, there will be circular dependency to cause build errors. The root cause is that pgtable.h shouldn't include io.h but pgtable.h need some macros defined in io.h. So cleanup those macros and remove the unnecessary inclusions, as other architectures do. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-25LoongArch: Cleanup reset routines with new APIHuacai Chen2-58/+21
Cleanup reset routines by using new do_kernel_power_off() instead of old pm_power_off(), and then simplify the whole file (reset.c) organization by inlining some functions. This cleanup also fix a poweroff error if EFI runtime is disabled. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-25LoongArch: Fix build warnings in VDSOHuacai Chen2-6/+11
Fix build warnings in VDSO as below: arch/loongarch/vdso/vgettimeofday.c:9:5: warning: no previous prototype for '__vdso_clock_gettime' [-Wmissing-prototypes] 9 | int __vdso_clock_gettime(clockid_t clock, | ^~~~~~~~~~~~~~~~~~~~ arch/loongarch/vdso/vgettimeofday.c:15:5: warning: no previous prototype for '__vdso_gettimeofday' [-Wmissing-prototypes] 15 | int __vdso_gettimeofday(struct __kernel_old_timeval *tv, | ^~~~~~~~~~~~~~~~~~~ arch/loongarch/vdso/vgettimeofday.c:21:5: warning: no previous prototype for '__vdso_clock_getres' [-Wmissing-prototypes] 21 | int __vdso_clock_getres(clockid_t clock_id, | ^~~~~~~~~~~~~~~~~~~ arch/loongarch/vdso/vgetcpu.c:27:5: warning: no previous prototype for '__vdso_getcpu' [-Wmissing-prototypes] 27 | int __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-25LoongArch: Select PCI_QUIRKS to avoid build errorHuacai Chen1-0/+1
PCI_LOONGSON is a mandatory for LoongArch and it is selected in Kconfig unconditionally, but its dependency PCI_QUIRKS is missing and may cause a build error when "make randconfig": arch/loongarch/pci/acpi.c: In function 'pci_acpi_setup_ecam_mapping': >> arch/loongarch/pci/acpi.c:103:29: error: 'loongson_pci_ecam_ops' undeclared (first use in this function) 103 | ecam_ops = &loongson_pci_ecam_ops; | ^~~~~~~~~~~~~~~~~~~~~ arch/loongarch/pci/acpi.c:103:29: note: each undeclared identifier is reported only once for each function it appears in Kconfig warnings: (for reference only) WARNING: unmet direct dependencies detected for PCI_LOONGSON Depends on [n]: PCI [=y] && (MACH_LOONGSON64 [=y] || COMPILE_TEST [=y]) && (OF [=y] || ACPI [=y]) && PCI_QUIRKS [=n] Selected by [y]: - LOONGARCH [=y] Fix it by selecting PCI_QUIRKS unconditionally, too. Reported-by: kernel test robot <lkp@intel.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-24x86/sev: Don't use cc_platform_has() for early SEV-SNP callsTom Lendacky1-2/+14
When running identity-mapped and depending on the kernel configuration, it is possible that the compiler uses jump tables when generating code for cc_platform_has(). This causes a boot failure because the jump table uses un-mapped kernel virtual addresses, not identity-mapped addresses. This has been seen with CONFIG_RETPOLINE=n. Similar to sme_encrypt_kernel(), use an open-coded direct check for the status of SNP rather than trying to eliminate the jump table. This preserves any code optimization in cc_platform_has() that can be useful post boot. It also limits the changes to SEV-specific files so that future compiler features won't necessarily require possible build changes just because they are not compatible with running identity-mapped. [ bp: Massage commit message. ] Fixes: 5e5ccff60a29 ("x86/sev: Add helper for validating pages in early enc attribute changes") Reported-by: Sean Christopherson <seanjc@google.com> Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # 5.19.x Link: https://lore.kernel.org/all/YqfabnTRxFSM+LoX@google.com/
2022-08-24x86/boot: Don't propagate uninitialized boot_params->cc_blob_addressMichael Roth2-1/+19
In some cases, bootloaders will leave boot_params->cc_blob_address uninitialized rather than zeroing it out. This field is only meant to be set by the boot/compressed kernel in order to pass information to the uncompressed kernel when SEV-SNP support is enabled. Therefore, there are no cases where the bootloader-provided values should be treated as anything other than garbage. Otherwise, the uncompressed kernel may attempt to access this bogus address, leading to a crash during early boot. Normally, sanitize_boot_params() would be used to clear out such fields but that happens too late: sev_enable() may have already initialized it to a valid value that should not be zeroed out. Instead, have sev_enable() zero it out unconditionally beforehand. Also ensure this happens for !CONFIG_AMD_MEM_ENCRYPT as well by also including this handling in the sev_enable() stub function. [ bp: Massage commit message and comments. ] Fixes: b190a043c49a ("x86/sev: Add SEV-SNP feature detection/setup") Reported-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com> Reported-by: watnuss@gmx.de Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=216387 Link: https://lore.kernel.org/r/20220823160734.89036-1-michael.roth@amd.com
2022-08-24riscv: dts: microchip: mpfs: remove pci axi address translation propertyConor Dooley1-1/+0
An AXI master address translation table property was inadvertently added to the device tree & this was not caught by dtbs_check at the time. Remove the property - it should not be in mpfs.dtsi anyway as it would be more suitable in -fabric.dtsi nor does it actually apply to the version of the reference design we are using for upstream. Link: https://www.microsemi.com/document-portal/doc_download/1245812-polarfire-fpga-and-polarfire-soc-fpga-pci-express-user-guide # Section 1.3.3 Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree") Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-24riscv: dts: microchip: mpfs: remove bogus card-detect-delayConor Dooley2-2/+0
Recent versions of dt-schema warn about a previously undetected undocumented property: arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: mmc@20008000: Unevaluated properties are not allowed ('card-detect-delay' was unexpected) From schema: Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml There are no GPIOs connected to MSSIO6B4 pin K3 so adding the common cd-debounce-delay-ms property makes no sense. The Cadence IP has a register that sets the card detect delay as "DP * tclk". On MPFS, this clock frequency is not configurable (it must be 200 MHz) & the FPGA comes out of reset with this register already set. Fixes: bc47b2217f24 ("riscv: dts: microchip: add the sundance polarberry") Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-24riscv: dts: microchip: mpfs: remove ti,fifo-depth propertyConor Dooley2-4/+0
Recent versions of dt-schema warn about a previously undetected undocument property on the icicle & polarberry devicetrees: arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: ethernet@20112000: ethernet-phy@8: Unevaluated properties are not allowed ('ti,fifo-depth' was unexpected) From schema: Documentation/devicetree/bindings/net/cdns,macb.yaml I know what you're thinking, the binding doesn't look to be the problem and I agree. I am not sure why a TI vendor property was ever actually added since it has no meaning... just get rid of it. Fixes: bc47b2217f24 ("riscv: dts: microchip: add the sundance polarberry") Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-24riscv: dts: microchip: mpfs: fix incorrect pcie child node nameConor Dooley1-1/+1
Recent versions of dt-schema complain about the PCIe controller's child node name: arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: pcie@2000000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'legacy-interrupt-controller', 'microchip,axi-m-atr0' were unexpected) From schema: Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml Make the dts match the correct property name in the dts. Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree") Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-23Merge tag 'parisc-for-6.0-2' of ↵Linus Torvalds4-25/+49
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Some interesting background to the current patchset: It turned out that the fldw instruction (which loads a 32-bit word from memory into one half of a FP register) failed on unaligned addresses and even trashed some other random FP register instead. It's a trivial one-liner fix in the exception handler but this failure dates back to the very beginnings of the parisc-port. It's strange that it was never noticed before. Another patch fixes an annoyance noticed by Randy Dunlap. Running "make ARCH=parisc64 randconfig" always returned a 32-bit config, although one would expect a 64-bit config. Masahiro Yamada suggested to mimik sparc Kconfig code, which fixed the issue nicely. This allowed to drop some compiler build checks too. Third, it's possible to build an optimized 32-bit kernel for PA8X00 (64-bit) CPUs, which then wouldn't start on 32-bit-only (PA1.x) machines. I've added a bootup check which prevents that and which prints a message to the console. This can be tested with qemu, which currently only supports 32-bit emulation. The other patches are usual clean-up stuff like added return value checks and typo fixes in comments. Summary: - Fix emulation of fldw instruction on unaligned addresses - Fix "make ARCH=parisc64 randconfig" to return a 64-bit config - Prevent boot if trying to boot a 32-bit kernel compiled for PA8X00 CPUs on 32-bit only machines - ccio-dma: Handle kmalloc failure in ccio_init_resources()" * tag 'parisc-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources() parisc: led: Move from strlcpy with unused retval to strscpy parisc: ccio-dma: Fix typo in comment Revert "parisc: Show error if wrong 32/64-bit compiler is being used" parisc: Make CONFIG_64BIT available for ARCH=parisc64 only parisc: Fix exception handler for fldw and fstw instructions
2022-08-23x86/cpu: Add new Raptor Lake CPU model numberTony Luck1-0/+2
Note1: Model 0xB7 already claimed the "no suffix" #define for a regular client part, so add (yet another) suffix "S" to distinguish this new part from the earlier one. Note2: the RAPTORLAKE* and ALDERLAKE* processors are very similar from a software enabling point of view. There are no known features that have model-specific enabling and also differ between the two. In other words, every single place that list *one* or more RAPTORLAKE* or ALDERLAKE* processors should list all of them. Note3: This is being merged before there is an in-tree user. Merging this provides an "anchor" so that the different folks can update their subsystems (like perf) in parallel to use this define and test it. [ dhansen: add a note about why this has no in-tree users yet ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20220823174819.223941-1-tony.luck@intel.com
2022-08-23arm64/sme: Don't flush SVE register state when handling SME trapsMark Brown1-11/+0
Currently as part of handling a SME access trap we flush the SVE register state. This is not needed and would corrupt register state if the task has access to the SVE registers already. For non-streaming mode accesses the required flushing will be done in the SVE access trap. For streaming mode SVE register accesses the architecture guarantees that the register state will be flushed when streaming mode is entered or exited so there is no need for us to do so. Simply remove the register initialisation. Fixes: 8bd7f91c03d8 ("arm64/sme: Implement traps and syscall handling for SME") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220817182324.638214-5-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64/sme: Don't flush SVE register state when allocating SME storageMark Brown4-10/+12
Currently when taking a SME access trap we allocate storage for the SVE register state in order to be able to handle storage of streaming mode SVE. Due to the original usage in a purely SVE context the SVE register state allocation this also flushes the register state for SVE if storage was already allocated but in the SME context this is not desirable. For a SME access trap to be taken the task must not be in streaming mode so either there already is SVE register state present for regular SVE mode which would be corrupted or the task does not have TIF_SVE and the flush is redundant. Fix this by adding a flag to sve_alloc() indicating if we are in a SVE context and need to flush the state. Freshly allocated storage is always zeroed either way. Fixes: 8bd7f91c03d8 ("arm64/sme: Implement traps and syscall handling for SME") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220817182324.638214-4-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64/signal: Flush FPSIMD register state when disabling streaming modeMark Brown1-0/+10
When handling a signal delivered to a context with streaming mode enabled we will disable streaming mode for the signal handler, when doing so we should also flush the saved FPSIMD register state like exiting streaming mode in the hardware would do so that if that state is reloaded we get the same behaviour. Without this we will reload whatever the last FPSIMD state that was saved for the task was. Fixes: 40a8e87bb328 ("arm64/sme: Disable ZA and streaming mode when handling signals") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220817182324.638214-3-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64/signal: Raise limit on stack framesMark Brown1-1/+1
The signal code has a limit of 64K on the size of a stack frame that it will generate, if this limit is exceeded then a process will be killed if it receives a signal. Unfortunately with the advent of SME this limit is too small - the maximum possible size of the ZA register alone is 64K. This is not an issue for practical systems at present but is easily seen using virtual platforms. Raise the limit to 256K, this is substantially more than could be used by any current architecture extension. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220817182324.638214-2-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64/cache: Fix cache_type_cwg() for register generationMark Brown1-1/+1
Ard noticed that since we converted CTR_EL0 to automatic generation we have been seeing errors on some systems handling the value of cache_type_cwg() such as CPU features: No Cache Writeback Granule information, assuming 128 This is because the manual definition of CTR_EL0_CWG_MASK was done without a shift while our convention is to define the mask after shifting. This means that the user in cache_type_cwg() was broken as it was written for the manually written shift then mask. Fix this by converting to use SYS_FIELD_GET(). The only other field where the _MASK for this register is used is IminLine which is at offset 0 so unaffected. Fixes: 9a3634d02301 ("arm64/sysreg: Convert CTR_EL0 to automatic generation") Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220818213613.733091-4-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64/sysreg: Guard SYS_FIELD_ macros for asmMark Brown1-2/+2
The SYS_FIELD_ macros are not safe for assembly contexts, move them inside the guarded section. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220818213613.733091-3-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64/sysreg: Directly include bitfield.hMark Brown1-0/+1
The SYS_FIELD_ macros in sysreg.h use definitions from bitfield.h but there is no direct inclusion of it, add one to ensure that sysreg.h is directly usable. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220818213613.733091-2-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64: cacheinfo: Fix incorrect assignment of signed error value to unsigned ↵Sudeep Holla1-1/+5
fw_level Though acpi_find_last_cache_level() always returned signed value and the document states it will return any errors caused by lack of a PPTT table, it never returned negative values before. Commit 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage") however changed it by returning -ENOENT if no PPTT was found. The value returned from acpi_find_last_cache_level() is then assigned to unsigned fw_level. It will result in the number of cache leaves calculated incorrectly as a huge value which will then cause the following warning from __alloc_pages as the order would be great than MAX_ORDER because of incorrect and huge cache leaves value. | WARNING: CPU: 0 PID: 1 at mm/page_alloc.c:5407 __alloc_pages+0x74/0x314 | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-10393-g7c2a8d3ac4c0 #73 | pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __alloc_pages+0x74/0x314 | lr : alloc_pages+0xe8/0x318 | Call trace: | __alloc_pages+0x74/0x314 | alloc_pages+0xe8/0x318 | kmalloc_order_trace+0x68/0x1dc | __kmalloc+0x240/0x338 | detect_cache_attributes+0xe0/0x56c | update_siblings_masks+0x38/0x284 | store_cpu_topology+0x78/0x84 | smp_prepare_cpus+0x48/0x134 | kernel_init_freeable+0xc4/0x14c | kernel_init+0x2c/0x1b4 | ret_from_fork+0x10/0x20 Fix the same by changing fw_level to be signed integer and return the error from init_cache_level() early in case of error. Reported-and-Tested-by: Bruno Goncalves <bgoncalv@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20220808084640.3165368-1-sudeep.holla@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64: errata: add detection for AMEVCNTR01 incrementing incorrectlyIonela Voinescu5-3/+62
The AMU counter AMEVCNTR01 (constant counter) should increment at the same rate as the system counter. On affected Cortex-A510 cores, AMEVCNTR01 increments incorrectly giving a significantly higher output value. This results in inaccurate task scheduler utilization tracking and incorrect feedback on CPU frequency. Work around this problem by returning 0 when reading the affected counter in key locations that results in disabling all users of this counter from using it either for frequency invariance or as FFH reference counter. This effect is the same to firmware disabling affected counters. Details on how the two features are affected by this erratum: - AMU counters will not be used for frequency invariance for affected CPUs and CPUs in the same cpufreq policy. AMUs can still be used for frequency invariance for unaffected CPUs in the system. Although unlikely, if no alternative method can be found to support frequency invariance for affected CPUs (cpufreq based or solution based on platform counters) frequency invariance will be disabled. Please check the chapter on frequency invariance at Documentation/scheduler/sched-capacity.rst for details of its effect. - Given that FFH can be used to fetch either the core or constant counter values, restrictions are lifted regarding any of these counters returning a valid (!0) value. Therefore FFH is considered supported if there is a least one CPU that support AMUs, independent of any counters being disabled or affected by this erratum. Clarifying comments are now added to the cpc_ffh_supported(), cpu_read_constcnt() and cpu_read_corecnt() functions. The above is achieved through adding a new erratum: ARM64_ERRATUM_2457168. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: James Morse <james.morse@arm.com> Link: https://lore.kernel.org/r/20220819103050.24211-1-ionela.voinescu@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64: fix rodata=fullMark Rutland2-18/+17
On arm64, "rodata=full" has been suppored (but not documented) since commit: c55191e96caa9d78 ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well") As it's necessary to determine the rodata configuration early during boot, arm64 has an early_param() handler for this, whereas init/main.c has a __setup() handler which is run later. Unfortunately, this split meant that since commit: f9a40b0890658330 ("init/main.c: return 1 from handled __setup() functions") ... passing "rodata=full" would result in a spurious warning from the __setup() handler (though RO permissions would be configured appropriately). Further, "rodata=full" has been broken since commit: 0d6ea3ac94ca77c5 ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()") ... which caused strtobool() to parse "full" as false (in addition to many other values not documented for the "rodata=" kernel parameter. This patch fixes this breakage by: * Moving the core parameter parser to an __early_param(), such that it is available early. * Adding an (optional) arch hook which arm64 can use to parse "full". * Updating the documentation to mention that "full" is valid for arm64. * Having the core parameter parser handle "on" and "off" explicitly, such that any undocumented values (e.g. typos such as "ful") are reported as errors rather than being silently accepted. Note that __setup() and early_param() have opposite conventions for their return values, where __setup() uses 1 to indicate a parameter was handled and early_param() uses 0 to indicate a parameter was handled. Fixes: f9a40b089065 ("init/main.c: return 1 from handled __setup() functions") Fixes: 0d6ea3ac94ca ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jagdish Gediya <jvgediya@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Will Deacon <will@kernel.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220817154022.3974645-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-08-23arm64: Fix comment typoKuan-Ying Lee1-1/+1
Replace wrong 'FIQ EL1h' comment with 'FIQ EL1t'. Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Link: https://lore.kernel.org/r/20220721030531.21234-1-Kuan-Ying.Lee@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2022-08-22parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machinesHelge Deller1-1/+42
If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x machine is detected. Signed-off-by: Helge Deller <deller@gmx.de>
2022-08-22Revert "parisc: Show error if wrong 32/64-bit compiler is being used"Helge Deller1-8/+0
This reverts commit b160628e9ebcdc85d0db9d7f423c26b3c7c179d0. There is no need any longer to have this sanity check, because the previous commit ("parisc: Make CONFIG_64BIT available for ARCH=parisc64 only") prevents that CONFIG_64BIT is set if ARCH==parisc. Signed-off-by: Helge Deller <deller@gmx.de>
2022-08-22parisc: Make CONFIG_64BIT available for ARCH=parisc64 onlyHelge Deller1-15/+6
With this patch the ARCH= parameter decides if the CONFIG_64BIT option will be set or not. This means, the ARCH= parameter will give: ARCH=parisc -> 32-bit kernel ARCH=parisc64 -> 64-bit kernel This simplifies the usage of the other config options like randconfig, allmodconfig and allyesconfig a lot and produces the output which is expected for parisc64 (64-bit) vs. parisc (32-bit). Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> # 5.15+
2022-08-22Merge tag 'irq-urgent-2022-08-21' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "Misc irqchip fixes: LoongArch driver fixes and a Hyper-V IOMMU fix" * tag 'irq-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/loongson-liointc: Fix an error handling path in liointc_init() irqchip/loongarch: Fix irq_domain_alloc_fwnode() abuse irqchip/loongson-pch-pic: Move find_pch_pic() into CONFIG_ACPI irqchip/loongson-eiointc: Fix a build warning irqchip/loongson-eiointc: Fix irq affinity setting iommu/hyper-v: Use helper instead of directly accessing affinity
2022-08-22Merge tag 'perf-urgent-2022-08-21' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 kprobes fix from Ingo Molnar: "Fix a kprobes bug in JNG/JNLE emulation when a kprobe is installed at such instructions, possibly resulting in incorrect execution (the wrong branch taken)" * tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix JNG/JNLE emulation
2022-08-21asm goto: eradicate CC_HAS_ASM_GOTONick Desaulniers6-40/+5
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0. The minimum supported versions of these tools for the build according to Documentation/process/changes.rst are 5.1 and 11.0.0 respectively. Remove the feature detection script, Kconfig option, and clean up some fallback code that is no longer supported. The removed script was also testing for a GCC specific bug that was fixed in the 4.7 release. Also remove workarounds for bpftrace using clang older than 9.0.0, since other BPF backend fixes are required at this point. Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/ Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637 Acked-by: Borislav Petkov <bp@suse.de> Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-21x86/unwind/orc: Unwind ftrace trampolines with correct ORC entryChen Zhongjin1-5/+10
When meeting ftrace trampolines in ORC unwinding, unwinder uses address of ftrace_{regs_}call address to find the ORC entry, which gets next frame at sp+176. If there is an IRQ hitting at sub $0xa8,%rsp, the next frame should be sp+8 instead of 176. It makes unwinder skip correct frame and throw warnings such as "wrong direction" or "can't access registers", etc, depending on the content of the incorrect frame address. By adding the base address ftrace_{regs_}caller with the offset *ip - ops->trampoline*, we can get the correct address to find the ORC entry. Also change "caller" to "tramp_addr" to make variable name conform to its content. [ mingo: Clarified the changelog a bit. ] Fixes: 6be7fa3c74d1 ("ftrace, orc, x86: Handle ftrace dynamically allocated trampolines") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220819084334.244016-1-chenzhongjin@huawei.com
2022-08-21parisc: Fix exception handler for fldw and fstw instructionsHelge Deller1-1/+1
The exception handler is broken for unaligned memory acceses with fldw and fstw instructions, because it trashes or uses randomly some other floating point register than the one specified in the instruction word on loads and stores. The instruction "fldw 0(addr),%fr22L" (and the other fldw/fstw instructions) encode the target register (%fr22) in the rightmost 5 bits of the instruction word. The 7th rightmost bit of the instruction word defines if the left or right half of %fr22 should be used. While processing unaligned address accesses, the FR3() define is used to extract the offset into the local floating-point register set. But the calculation in FR3() was buggy, so that for example instead of %fr22, register %fr12 [((22 * 2) & 0x1f) = 12] was used. This bug has been since forever in the parisc kernel and I wonder why it wasn't detected earlier. Interestingly I noticed this bug just because the libime debian package failed to build on *native* hardware, while it successfully built in qemu. This patch corrects the bitshift and masking calculation in FR3(). Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org>
2022-08-20Merge tag 's390-6.0-1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Fix a KVM crash on z12 and older machines caused by a wrong assumption that Query AP Configuration Information is always available. - Lower severity of excessive Hypervisor filesystem error messages when booting under KVM. * tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ap: fix crash on older machines based on QCI info missing s390/hypfs: avoid error message under KVM
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-11 21:53:58 +0300