| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq driver updates from Thomas Gleixner:
- Support for hard indices on RISC-V. The hart index identifies a hart
(core) within a specific interrupt domain in RISC-V's Priviledged
Architecture.
- Rework of the RISC-V MSI driver
This moves the driver over to the generic MSI library and solves the
affinity problem of unmaskable PCI/MSI controllers. Unmaskable
PCI/MSI controllers are prone to lose interrupts when the MSI message
is updated to change the affinity because the message write consists
of three 32-bit subsequent writes, which update address and data. As
these writes are non-atomic versus the device raising an interrupt,
the device can observe a half written update and issue an interrupt
on the wrong vector. This is mitiated by a carefully orchestrated
step by step update and the observation of an eventually pending
interrupt on the CPU which issues the update. The algorithm follows
the well established method of the X86 MSI driver.
- A new driver for the RISC-V Sophgo SG2042 MSI controller
- Overhaul of the Renesas RZQ2L driver
Simplification of the probe function by using devm_*() mechanisms,
which avoid the endless list of error prone gotos in the failure
paths.
- Expand the Renesas RZV2H driver to support RZ/G3E SoCs
- A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
ensure that the addressing is limited to the lower 32-bit of the
physical address space.
- Add support for the Allwinner AS23 NMI controller
- Expand the IMX irqsteer driver to handle up to 960 input interrupts
- The usual small updates, cleanups and device tree changes
* tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
irqchip/imx-irqsteer: Support up to 960 input interrupts
irqchip/sunxi-nmi: Support Allwinner A523 NMI controller
dt-bindings: irq: sun7i-nmi: Document the Allwinner A523 NMI controller
irqchip/davinci-cp-intc: Remove public header
irqchip/renesas-rzv2h: Add RZ/G3E support
irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP}
irqchip/renesas-rzv2h: Update TSSR_TIEN macro
irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable
irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()
irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted()
irqchip/renesas-rzv2h: Simplify rzv2h_icu_init()
irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv
irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type()
dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E SoC
riscv: sophgo: dts: Add msi controller for SG2042
irqchip: Add the Sophgo SG2042 MSI interrupt controller
dt-bindings: interrupt-controller: Add Sophgo SG2042 MSI
arm64: dts: rockchip: rk356x: Move PCIe MSI to use GIC ITS instead of MBI
...
|
|
The actual serial output function is a no-op for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20250314173226.3062535-3-dwmw2@infradead.org
|
|
[ mingo: Minor readability edits ]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20250314173226.3062535-2-dwmw2@infradead.org
|
|
The x86/cacheinfo code has been heavily refactored and fleshed out at
parent commits, where any necessary coding style fixes were also done
in place.
Apply Documentation/process/maintainer-tip.rst coding style fixes to the
rest of the code, and align its assignment expressions for readability.
Standardize on CPUID(n) when mentioning leaf queries.
Avoid breaking long lines when doing so helps readability.
At cacheinfo_amd_init_llc_id(), rename variable 'msb' to 'index_msb' as
this is how it's called at the rest of cacheinfo.c code.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-30-darwi@linutronix.de
|
|
Multiple code paths at cacheinfo.c and amd_nb.c check for AMD/Hygon CPUs
L3 cache presensce by directly checking leaf 0x80000006 EDX output.
Extract that logic into its own function. While at it, rework the
AMD/Hygon LLC topology ID caclculation comments for clarity.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-29-darwi@linutronix.de
|
|
The cache_type_map[] array is used to map Intel leaf 0x4 cache_type
values to their corresponding types at <linux/cacheinfo.h>.
Move that array's definition after the actual CPUID leaf 0x4 structures,
instead of having it in the middle of AMD leaf 0x4 emulation code.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-28-darwi@linutronix.de
|
|
The logic of not doing a cache flush if the CPU declares cache self
snooping support is repeated across the x86/cacheinfo code. Extract it
into its own function.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-27-darwi@linutronix.de
|
|
For Intel CPUID leaf 0x4 parsing, refactor the cache level topology ID
calculation code into its own method instead of repeating the same logic
twice for L2 and L3.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-26-darwi@linutronix.de
|
|
init_intel_cacheinfo() was overly complex. It parsed leaf 0x4 data,
leaf 0x2 data, and performed post-processing, all within one function.
Parent commit moved leaf 0x2 parsing and the post-processing logic into
their own functions.
Continue the refactoring by extracting leaf 0x4 parsing into its own
function. Initialize local L2/L3 topology ID variables to BAD_APICID by
default, thus ensuring they can be used unconditionally.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-25-darwi@linutronix.de
|
|
The logic of init_intel_cacheinfo() is quite convoluted: it mixes leaf
0x4 parsing, leaf 0x2 parsing, plus some post-processing, in a single
place.
Begin simplifying its logic by extracting the leaf 0x2 parsing code, and
the post-processing logic, into their own functions. While at it,
rework the SMT LLC topology ID comment for clarity.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-24-darwi@linutronix.de
|
|
CPUID leaf 0x2 output is a stream of one-byte descriptors, each implying
certain details about the CPU's cache and TLB entries.
At previous commits, the mapping tables for such descriptors were merged
into one consolidated table. The mapping was also transformed into a
hash lookup instead of a loop-based lookup for each descriptor.
Use the new consolidated table and its hash-based lookup through the
for_each_leaf_0x2_tlb_entry() accessor.
Remove the TLB-specific mapping, intel_tlb_table[], as it is now no
longer used. Remove the <cpuid/types.h> macro, for_each_leaf_0x2_desc(),
since the converted code was its last user.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-23-darwi@linutronix.de
|
|
CPUID leaf 0x2 output is a stream of one-byte descriptors, each implying
certain details about the CPU's cache and TLB entries.
At previous commits, the mapping tables for such descriptors were merged
into one consolidated table. The mapping was also transformed into a
hash lookup instead of a loop-based lookup for each descriptor.
Use the new consolidated table and its hash-based lookup through the
for_each_leaf_0x2_tlb_entry() accessor. Remove the old cache-specific
mapping, cache_table[], as it is no longer used.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-22-darwi@linutronix.de
|
|
CPUID leaf 0x2 describes TLBs and caches. So there are two tables with the
respective descriptor constants in intel.c and cacheinfo.c. The tables
occupy almost 600 byte and require a loop based lookup for each variant.
Combining them into one table occupies exactly 1k rodata and allows to get
rid of the loop based lookup by just using the descriptor byte provided by
CPUID leaf 0x2 as index into the table, which simplifies the code and
reduces text size.
The conversion of the intel.c and cacheinfo.c code is done separately.
[ darwi: Actually define struct leaf_0x2_table.
Tab-align all of cpuid_0x2_table[] mapping entries.
Define needed SZ_* macros at <linux/sizes.h> instead (merged commit.)
Use CACHE_L1_{INST,DATA} as names for L1 cache descriptor types.
Set descriptor 0x63 type as TLB_DATA_1G_2M_4M and explain why.
Use enums for cache and TLB descriptor types (parent commits.)
Start enum types at 1 since type 0 is reserved for unknown descriptors.
Ensure that cache and TLB enum type values do not intersect.
Add leaf 0x2 table accessor for_each_leaf_0x2_entry() + documentation. ]
Co-developed-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-21-darwi@linutronix.de
|
|
The leaf 0x2 one-byte TLB descriptor types:
TLB_INST_4K
TLB_INST_4M
TLB_INST_2M_4M
...
are just discriminators to be used within the intel_tlb_table[] mapping.
Their specific values are irrelevant.
Use enums for such types.
Make the enum packed and static assert that its values remain within a
single byte so that the intel_tlb_table[] size do not go out of hand.
Use a __CHECKER__ guard for the static_assert(sizeof(enum) == 1) line as
sparse ignores the __packed annotation on enums.
This is similar to:
fe3944fb245a ("fs: Move enum rw_hint into a new header file")
for the core SCSI code.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/Z9rsTirs9lLfEPD9@lx-t490
Link: https://lore.kernel.org/r/20250324133324.23458-20-darwi@linutronix.de
|
|
The leaf 0x2 one-byte cache descriptor types:
CACHE_L1_INST
CACHE_L1_DATA
CACHE_L2
CACHE_L3
are just discriminators to be used within the cache_table[] mapping.
Their specific values are irrelevant.
Use enums for such types.
Make the enum packed and static assert that its values remain within a
single byte so that the cache_table[] array size do not go out of hand.
Use a __CHECKER__ guard for the static_assert(sizeof(enum) == 1) line as
sparse ignores the __packed annotation on enums.
This is similar to:
fe3944fb245a ("fs: Move enum rw_hint into a new header file")
for the core SCSI code.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/Z9rsTirs9lLfEPD9@lx-t490
Link: https://lore.kernel.org/r/20250324133324.23458-19-darwi@linutronix.de
|
|
CPUID leaf 0x2 output is a stream of one-byte descriptors, each implying
certain details about the CPU's cache and TLB entries.
Two separate tables exist for interpreting these descriptors: one for
TLBs at intel.c and one for caches at cacheinfo.c. These mapping tables
will be merged in further commits, among other improvements to their
model.
In preparation for this, use more descriptive type names for the leaf
0x2 descriptors associated with cpu caches. Namely:
LVL_1_INST => CACHE_L1_INST
LVL_1_DATA => CACHE_L1_DATA
LVL_2 => CACHE_L2
LVL_3 => CACHE_L3
After the TLB and cache descriptors mapping tables are merged, this will
make it clear that such descriptors correspond to cpu caches.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-18-darwi@linutronix.de
|
|
Parent commits decoupled amd_northbridge from _cpuid4_info_regs, moved
AMD L3 northbridge cache_disable_0/1 sysfs code to its own file, and
splitted AMD vs. Intel leaf 0x4 handling into:
amd_fill_cpuid4_info()
intel_fill_cpuid4_info()
fill_cpuid4_info()
After doing all that, the "_cpuid4_info_regs" name becomes a mouthful.
It is also not totally accurate, as the structure holds cpuid4 derived
information like cache node ID and size -- not just regs.
Rename struct _cpuid4_info_regs to _cpuid4_info. That new name also
better matches the AMD/Intel leaf 0x4 functions mentioned above.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-17-darwi@linutronix.de
|
|
The CPUID leaf 0x4 parsing code at cpuid4_cache_lookup_regs() is ugly and
convoluted. It is tangled with multiple nested conditions to handle:
* AMD with TOPEXT, or Hygon CPUs via leaf 0x8000001d
* Legacy AMD fallback via leaf 0x4 emulation
* Intel CPUs via the actual CPUID leaf 0x4
Moreover, AMD L3 northbridge initialization is also awkwardly placed
alongside the CPUID calls of the first two scenarios above. Refactor all
of that as follows:
* Update AMD's leaf 0x4 emulation comment to represent current state
* Clearly label the AMD leaf 0x4 emulation function as a fallback
* Split AMD/Hygon and Intel code paths into separate functions
* Move AMD L3 northbridge initialization out of CPUID leaf 0x4 code,
and into populate_cache_leaves() where it belongs. There,
ci_info_init() can directly store the initialized object in the
private pointer of the <linux/cacheinfo.h> API.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-16-darwi@linutronix.de
|
|
Per Documentation/filesystems/sysfs.rst, a sysfs attribute's show()
method should only use sysfs_emit() or sysfs_emit_at() when returning
values to user space.
Use sysfs_emit() for the AMD L3 cache sysfs attributes cache_disable_0,
cache_disable_1, and subcaches.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-15-darwi@linutronix.de
|
|
Parent commit decoupled amd_northbridge out of _cpuid4_info_regs, where
it was merely "parked" there until ci_info_init() can store it in the
private pointer of the <linux/cacheinfo.h> API.
Given that decoupling, move the AMD-specific L3 cache_disable_0/1 sysfs
code from the generic (and already extremely convoluted) x86/cacheinfo
code into its own file.
Compile the file only if CONFIG_AMD_NB and CONFIG_SYSFS are both
enabled, which mirrors the existing logic.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-14-darwi@linutronix.de
|
|
'struct _cpuid4_info_regs' is meant to hold the CPUID leaf 0x4
output registers (EAX, EBX, and ECX), as well as derived information
such as the cache node ID and size.
It also contains a reference to amd_northbridge, which is there only to
be "parked" until ci_info_init() can store it in the priv pointer of the
<linux/cacheinfo.h> API. That priv pointer is then used by AMD-specific
L3 cache_disable_0/1 sysfs attributes.
Decouple amd_northbridge from _cpuid4_info_regs and pass it explicitly
through the functions at x86/cacheinfo. Doing so clarifies when
amd_northbridge is actually needed (AMD-only code) and when it is
not (Intel-specific code). It also prepares for moving the AMD-specific
L3 cache_disable_0/1 sysfs code into its own file in next commit.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-13-darwi@linutronix.de
|
|
While gathering CPU cache info, CPUID leaf 0x8000001d is invoked in two
separate if blocks: one for Hygon CPUs and one for AMDs with topology
extensions. After each invocation, amd_init_l3_cache() is called.
Merge the two if blocks into a single condition, thus removing the
duplicated code. Future commits will expand these if blocks, so
combining them now is both cleaner and more maintainable.
Note, while at it, remove a useless "better error?" comment that was
within the same function since the 2005 commit e2cac78935ff ("[PATCH]
x86_64: When running cpuid4 need to run on the correct CPU").
Note, as previously done at commit aec28d852ed2 ("x86/cpuid: Standardize
on u32 in <asm/cpuid/api.h>"), standardize on using 'u32' and 'u8' types.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-12-darwi@linutronix.de
|
|
The cacheinfo code frequently uses the output registers from CPUID leaf
0x4. Such registers are cached in 'struct _cpuid4_info_regs', augmented
with related information, and are then passed across functions.
The naming of these _cpuid4_info_regs instances is confusing at best.
Some instances are called "this_leaf", which is vague as "this" lacks
context and "leaf" is overly generic given that other CPUID leaves are
also processed within cacheinfo. Other _cpuid4_info_regs instances are
just called "base", adding further ambiguity.
Standardize on id4 for all instances.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-11-darwi@linutronix.de
|
|
The ci_info_init() function initializes 10 members of a 'struct cacheinfo'
instance using passed data from CPUID leaf 0x4.
Such assignment expressions are difficult to read in their current form.
Align them for clarity.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-10-darwi@linutronix.de
|
|
_cpuid4_info_regs instances are passed through a large number of
functions at cacheinfo.c. For clarity, constify the instance parameters
where _cpuid4_info_regs is only read from.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-9-darwi@linutronix.de
|
|
The cacheinfo structure defined at <include/linux/cacheinfo.h> is a
generic cache info object representation.
Calling its instances at x86 cacheinfo.c "leaf" confuses it with a CPUID
leaf -- especially that multiple CPUID calls are already sprinkled across
that file. Most of such instances also have a redundant "this_" prefix.
Rename all of the cacheinfo "this_leaf" instances to just "ci".
[ darwi: Move into separate commit and write commit log ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-8-darwi@linutronix.de
|
|
amd_cpuid4()'s first parameter, "leaf", is not a CPUID leaf as the name
implies. Rather, it's an index emulating CPUID(4)'s subleaf semantics;
i.e. an ID for the cache object currently enumerated. Rename that
parameter to "index".
Apply minor coding style fixes to the rest of the function as well.
[ darwi: Move into a separate commit and write commit log.
Use "index" instead of "subleaf" for amd_cpuid4() first param,
as that's the name typically used at the whole of cacheinfo.c. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-7-darwi@linutronix.de
|
|
Extract the cache descriptor lookup logic out of the leaf 0x2 parsing
code and into a dedicated function. This disentangles such lookup from
the deeply nested leaf 0x2 parsing loop.
Remove the cache table termination entry, as it is no longer needed
after the ARRAY_SIZE()-based lookup.
[ darwi: Move refactoring logic into this separate commit + commit log.
Remove the cache table termination entry. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-6-darwi@linutronix.de
|
|
Parent commit introduced CPUID leaf 0x2 parsing helpers at
<asm/cpuid/leaf_0x2_api.h>. The new API allows sharing leaf 0x2's output
validation and iteration logic across both intel.c and cacheinfo.c.
Convert cacheinfo.c to that new API.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-5-darwi@linutronix.de
|
|
Introduce CPUID leaf 0x2 parsing helpers at <asm/cpuid/leaf_0x2_api.h>.
This allows sharing the leaf 0x2's output validation and iteration logic
across both x86/cpu intel.c and cacheinfo.c.
Start by converting intel.c to the new API.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-4-darwi@linutronix.de
|
|
Leaf 0x2 output includes a "query count" byte where it was supposed to
specify the number of repeated CPUID leaf 0x2 subleaf 0 queries needed to
extract all of the CPU's cache and TLB descriptors.
Per current Intel manuals, all CPUs supporting this leaf "will always"
return an iteration count of 1.
Remove the leaf 0x2 query loop and just query the hardware once.
Note, as previously done at commit aec28d852ed2 ("x86/cpuid: Standardize
on u32 in <asm/cpuid/api.h>"), standardize on using 'u32' and 'u8' types.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-3-darwi@linutronix.de
|
|
Leaf 0x2 output includes a "query count" byte where it was supposed to
specify the number of repeated CPUID leaf 0x2 subleaf 0 queries needed to
extract all of the CPU's cache and TLB descriptors.
Per current Intel manuals, all CPUs supporting this leaf "will always"
return an iteration count of 1.
Remove the leaf 0x2 query loop and just query the hardware once.
Note, as previously done in:
aec28d852ed2 ("x86/cpuid: Standardize on u32 in <asm/cpuid/api.h>")
standardize on using 'u32' and 'u8' types.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324133324.23458-2-darwi@linutronix.de
|
|
When split_lock_mitigate is disabled, each CPU needs its own delayed_work
structure. They are used to reenable split lock detection after its
disabling. But delayed_work structure must be correctly initialized after
its allocation.
Current implementation uses deferred initialization that makes the
split lock handler code unclear. The code can be simplified a bit
if the initialization is moved to the appropriate initcall.
sld_setup() is called before setup_per_cpu_areas(), thus it can't be used
for this purpose, so introduce an independent initcall for
the initialization.
[ mingo: Simplified the 'work' assignment line a bit more. ]
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250325085807.171885-1-davydov-max@yandex-team.ru
|
|
fpu_init_fpstate_user() was removed in:
commit 582b01b6ab27 ("x86/fpu: Remove old KVM FPU interface").
Update that comment to accurately reflect the current state regarding its
callers.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250324131931.2097905-1-chao.gao@intel.com
|
|
For X86_FEATURE_SMAP alternatives which replace NOP with STAC or CLAC,
uaccess validation skips the NOP branch to avoid following impossible
code paths, e.g. where a STAC would be patched but a CLAC wouldn't.
However, it's not safe to assume an X86_FEATURE_SMAP alternative is
patching STAC/CLAC. There can be other alternatives, like
static_cpu_has(), where both branches need to be validated.
Fix that by repurposing ANNOTATE_IGNORE_ALTERNATIVE for skipping either
original instructions or new ones. This is a more generic approach
which enables the removal of the feature checking hacks and the
insn->ignore bit.
Fixes the following warnings:
arch/x86/mm/fault.o: warning: objtool: do_user_addr_fault+0x8ec: __stack_chk_fail() missing __noreturn in .c/.h or NORETURN() in noreturns.h
arch/x86/mm/fault.o: warning: objtool: do_user_addr_fault+0x8f1: unreachable instruction
[ mingo: Fix up conflicts with recent x86 changes. ]
Fixes: ea24213d8088 ("objtool: Add UACCESS validation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/de0621ca242130156a55d5d74fed86994dfa4c9c.1742852846.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503181736.zkZUBv4N-lkp@intel.com/
|
|
During the bring-up of an x86 board, the kernel was crashing before
reaching the platform's console driver because of a bug in the firmware,
leaving no trace of the boot progress.
The only available method to debug the kernel boot process was via the
platform's MMIO-based UART, as the board lacked an I/O port-based UART,
PCI UART, or functional video output.
Then it turned out that earlyprintk= does not have a knob to configure
the MMIO-mapped UART.
Extend the early printk facility to support platform MMIO-based UARTs
on x86 systems, enabling debugging during the system bring-up phase.
The command line syntax to enable platform MMIO-based UART is:
earlyprintk=mmio,membase[,{nocfg|baudrate}][,keep]
Note, the change does not integrate MMIO-based UART support to:
arch/x86/boot/early_serial_console.c
Also, update kernel parameters documentation with the new syntax and
add the missing 'nocfg' setting to the PCI serial cards description.
Signed-off-by: Denis Mukhin <dmukhin@ford.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250324-earlyprintk-v3-1-aee7421dc469@ford.com
|
|
misplaced assignment
Commit:
2e4be0d011f2 ("x86/show_trace_log_lvl: Ensure stack pointer is aligned, again")
was intended to ensure alignment of the stack pointer; but it also moved
the initialization of the "stack" variable down into the loop header.
This was likely intended as a no-op cleanup, since the commit
message does not mention it; however, this caused a behavioral change
because the value of "regs" is different between the two places.
Originally, get_stack_pointer() used the regs provided by the caller; after
that commit, get_stack_pointer() instead uses the regs at the top of the
stack frame the unwinder is looking at. Often, there are no such regs at
all, and "regs" is NULL, causing get_stack_pointer() to fall back to the
task's current stack pointer, which is not what we want here, but probably
happens to mostly work. Other times, the original regs will point to
another regs frame - in that case, the linear guess unwind logic in
show_trace_log_lvl() will start unwinding too far up the stack, causing the
first frame found by the proper unwinder to never be visited, resulting in
a stack trace consisting purely of guess lines.
Fix it by moving the "stack = " assignment back where it belongs.
Fixes: 2e4be0d011f2 ("x86/show_trace_log_lvl: Ensure stack pointer is aligned, again")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250325-2025-03-unwind-fixes-v1-2-acd774364768@google.com
|
|
PUSH_REGS with save_ret=1 is used by interrupt entry helper functions that
initially start with a UNWIND_HINT_FUNC ORC state.
However, save_ret=1 means that we clobber the helper function's return
address (and then later restore the return address further down on the
stack); after that point, the only thing on the stack we can unwind through
is the IRET frame, so use UNWIND_HINT_IRET_REGS until we have a full
pt_regs frame.
( An alternate approach would be to move the pt_regs->di overwrite down
such that it is the final step of pt_regs setup; but I don't want to
rearrange entry code just to make unwinding a tiny bit more elegant. )
Fixes: 9e809d15d6b6 ("x86/entry: Reduce the code footprint of the 'idtentry' macro")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250325-2025-03-unwind-fixes-v1-1-acd774364768@google.com
|
|
There are two issues that can appear when building with clang and
'-march=native'.
The first issue is a compiler crash in the ipv6 stack with clang-18,
such as when building allmodconfig. This was frequently reported on the
LLVM issue tracker:
# Link: https://github.com/llvm/llvm-project/issues?q=is%3Aissue%20ip6_rcv_core
Stack dump:
0. Program arguments: clang ... -march=native ... net/ipv6/ip6_input.c
1. <eof> parser at end of file
2. Code generation
3. Running pass 'Function Pass Manager' on module 'net/ipv6/ip6_input.c'.
4. Running pass 'X86 DAG->DAG Instruction Selection' on function '@ip6_rcv_core'
The second issue is certain -Wframe-larger-than warnings that appear
with clang versions prior to 19, which introduced an optimization that
produces much better code:
# Link: https://github.com/llvm/llvm-project/commit/90ba33099cbb17e7c159e9ebc5a512037db99d6d [2]
clang-18:
drivers/media/pci/saa7164/saa7164-core.c:605:20: error: stack frame size (2392) exceeds limit (2048) in 'saa7164_irq' [-Werror,-Wframe-larger-than]
605 | static irqreturn_t saa7164_irq(int irq, void *dev_id)
| ^
clang-19:
drivers/media/pci/saa7164/saa7164-core.c:605:20: error: stack frame size (216) exceeds limit (128) in 'saa7164_irq' [-Werror,-Wframe-larger-than]
605 | static irqreturn_t saa7164_irq(int irq, void *dev_id)
| ^
Restrict the testing of the availability of '-march=native' to all
supported GCC versions and clang-19 and newer to avoid these known
resolved issues.
Fixes: 0480bc7e65dc ("x86/kbuild/64: Add the CONFIG_X86_NATIVE_CPU option to locally optimize the kernel with '-march=native'")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tor Vic <torvic9@mailbox.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324-x86-march-native-clang-19-and-newer-v1-1-3a05ed32a89e@kernel.org
|
|
Stephen reported this build failure when cross-compiling:
cc1: error: bad value 'native' for '-march=' switch
Test for the availability of the -march=native flag.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # build test
Cc: Tor Vic <torvic9@mailbox.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250324172723.49fb0416@canb.auug.org.au
|
|
kernel with '-march=native'
Add a 'native' option that allows users to build an optimized kernel for
their local machine (i.e. the machine which is used to build the kernel)
by passing '-march=native' to CFLAGS.
The idea comes from Linus' reply to Arnd's initial proposal:
https://lore.kernel.org/all/CAHk-=wji1sV93yKbc==Z7OSSHBiDE=LAdG_d5Y-zPBrnSs0k2A@mail.gmail.com/
Here are some numbers comparing 'generic' to 'native' on a Skylake dual-core
laptop (generic --> native):
- vmlinux and compressed modules size:
125'907'744 bytes --> 125'595'280 bytes (-0.248 %)
18'810 kilobytes --> 18'770 kilobytes (-0.213 %)
- phoronix, average of 3 runs:
ffmpeg:
130.99 --> 131.15 (+0.122 %)
nginx:
10'650 --> 10'725 (+0.704 %)
hackbench (lower is better):
102.27 --> 99.50 (-2.709 %)
- xz compression of firefox tarball (lower is better):
319.57 seconds --> 317.34 seconds (-0.698 %)
- stress-ng, bogoops, average of 3 15-second runs:
fork:
111'744 --> 115'509 (+3.397 %)
bsearch:
7'211 --> 7'436 (+3.120 %)
memfd:
3'591 --> 3'604 (+0.362 %)
mmapfork:
630 --> 629 (-0.159 %)
schedmix:
42'715 --> 43'251 (+1.255 %)
epoll:
2'443'767 --> 2'454'413 (+0.436 %)
vm:
1'442'256 --> 1'486'615 (+3.076 %)
- schbench (two message threads), 30-second runs:
304 rps --> 305 rps (+0.329 %)
There is little difference both in terms of size and of performance, however
the native build comes out on top ever so slightly.
[ mingo: Renamed the option to CONFIG_X86_NATIVE_CPU, expanded the help text
and added Linus's Suggested-by tag. ]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tor Vic <torvic9@mailbox.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250321142859.13889-1-torvic9@mailbox.org
|
|
Support for STA2X11-based systems was removed in February in:
dcbb01fbb7ae ("x86/pci: Remove old STA2x11 support")
Intel MID for 32-bit platforms was removed from this list also in
February in:
ca5955dd5f08 ("x86/cpu: Document CONFIG_X86_INTEL_MID as 64-bit-only")
Intel MID for 64-bit platforms is a duplicate for "Merrifield/Moorefield
MID devices".
Fixes: 4047e8773fb6 ("x86/Kconfig: Update lists in X86_EXTENDED_PLATFORM")
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250322175052.43611-1-mat.jonczyk@o2.pl
|
|
Currently, it is not true that the kernel will panic with CONFIG_X86_X2APIC=n
on systems that require it; it will try to disable the APIC and run without
it to at least give the user a clear warning message. See the second
variant of check_x2apic() in arch/x86/kernel/apic/apic.c .
Also massage some other parts of the help text.
Fixes: 9232c49ff31c ("x86/Kconfig: Enable X86_X2APIC by default and improve help text")
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250322154541.40325-1-mat.jonczyk@o2.pl
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We've had this before: when we remove infrastructure to generate files,
the old stale build artifacts still remain in-tree. And when the
infrastructure to generate them is gone, so is the gitignore file for
those build artifacts.
End result: git will see the old generated files, and people will
mistakenly commit them. That's what happened with the 'genheaders' file
not that long ago (see commit 04a3389b3535 "Remove stale generated
'genheaders' file").
This time it's commit 9c54baab4401 ("x86/boot: Drop CRC-32 checksum and
the build tool that generates it") that removed the 'build' file from
the arch/x86/boot/tools/ subdirectory, and removed the .gitignore file
too (because the whole subdirectory is gone).
And as a result, if you don't do a 'git clean -dqfx' or similar to clean
up your tree, 'git status' will say
Untracked files:
(use "git add <file>..." to include in what will be committed)
arch/x86/boot/tools/
and some hapless sleep-deprived developer will inevitably decide that
that means that they need to 'git add' that directory. Which would
bring back some stale generated file that we most definitely do not want
in the tree.
So when removing directories that had special .gitignore patterns, make
sure to add a new gitignore entry in the parent directory for the no
longer existing subdirectory.
It will avoid mistakes.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Fixes: 9c54baab4401 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"Two small cleanups in the x86 platform support code"
* tag 'x86-platform-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/olpc: Remove unused variable 'len' in olpc_dt_compatible_match()
x86/platform/olpc-xo1-sci: Don't include <linux/pm_wakeup.h> directly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Ingo Molnar:
- Improve sme_enable() PIC build robustness (Kevin Loughlin)
- Simplify vc_handle_msr() a bit (Peng Hao)
[ Just reminding myself and everybody else about the endless stream of
x86 TLAs: "SEV" is AMD's Secure Encrypted Virtualization - Linus ]
* tag 'x86-sev-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Simplify the code by removing unnecessary 'else' statement
x86/sev: Add missing RIP_REL_REF() invocations during sme_enable()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Miscellaneous x86 cleanups by Arnd Bergmann, Charles Han, Mirsad
Todorovac, Randy Dunlap, Thorsten Blum and Zhang Kunbo"
* tag 'x86-cleanups-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/coco: Replace 'static const cc_mask' with the newly introduced cc_get_mask() function
x86/delay: Fix inconsistent whitespace
selftests/x86/syscall: Fix coccinelle WARNING recommending the use of ARRAY_SIZE()
x86/platform: Fix missing declaration of 'x86_apple_machine'
x86/irq: Fix missing declaration of 'io_apic_irqs'
x86/usercopy: Fix kernel-doc func param name in clean_cache_range()'s description
x86/apic: Use str_disabled_enabled() helper in print_ipi_mode()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/fpu updates from Ingo Molnar:
- Improve crypto performance by making kernel-mode FPU reliably usable
in softirqs ((Eric Biggers)
- Fully optimize out WARN_ON_FPU() (Eric Biggers)
- Initial steps to support Support Intel APX (Advanced Performance
Extensions) (Chang S. Bae)
- Fix KASAN for arch_dup_task_struct() (Benjamin Berg)
- Refine and simplify the FPU magic number check during signal return
(Chang S. Bae)
- Fix inconsistencies in guest FPU xfeatures (Chao Gao, Stanislav
Spassov)
- selftests/x86/xstate: Introduce common code for testing extended
states (Chang S. Bae)
- Misc fixes and cleanups (Borislav Petkov, Colin Ian King, Uros
Bizjak)
* tag 'x86-fpu-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Fix inconsistencies in guest FPU xfeatures
x86/fpu: Clarify the "xa" symbolic name used in the XSTATE* macros
x86/fpu: Use XSAVE{,OPT,C,S} and XRSTOR{,S} mnemonics in xstate.h
x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs
x86/fpu/xstate: Simplify print_xstate_features()
x86/fpu: Refine and simplify the magic number check during signal return
selftests/x86/xstate: Fix spelling mistake "hader" -> "header"
x86/fpu: Avoid copying dynamic FP state from init_task in arch_dup_task_struct()
vmlinux.lds.h: Remove entry to place init_task onto init_stack
selftests/x86/avx: Add AVX tests
selftests/x86/xstate: Clarify supported xstates
selftests/x86/xstate: Consolidate test invocations into a single entry
selftests/x86/xstate: Introduce signal ABI test
selftests/x86/xstate: Refactor ptrace ABI test
selftests/x86/xstate: Refactor context switching test
selftests/x86/xstate: Enumerate and name xstate components
selftests/x86/xstate: Refactor XSAVE helpers for general use
selftests/x86: Consolidate redundant signal helper functions
x86/fpu: Fix guest FPU state buffer allocation size
x86/fpu: Fully optimize out WARN_ON_FPU()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot code updates from Ingo Molnar:
- Memblock setup and other early boot code cleanups (Mike Rapoport)
- Export e820_table_kexec[] to sysfs (Dave Young)
- Baby steps of adding relocate_kernel() debugging support (David
Woodhouse)
- Replace open-coded parity calculation with parity8() (Kuan-Wei Chiu)
- Move the LA57 trampoline to separate source file (Ard Biesheuvel)
- Misc micro-optimizations (Uros Bizjak)
- Drop obsolete E820_TYPE_RESERVED_KERN and related code (Mike
Rapoport)
* tag 'x86-boot-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kexec: Add relocate_kernel() debugging support: Load a GDT
x86/boot: Move the LA57 trampoline to separate source file
x86/boot: Do not test if AC and ID eflags are changeable on x86_64
x86/bootflag: Replace open-coded parity calculation with parity8()
x86/bootflag: Micro-optimize sbf_write()
x86/boot: Add missing has_cpuflag() prototype
x86/kexec: Export e820_table_kexec[] to sysfs
x86/boot: Change some static bootflag functions to bool
x86/e820: Drop obsolete E820_TYPE_RESERVED_KERN and related code
x86/boot: Split parsing of boot_params into the parse_boot_params() helper function
x86/boot: Split kernel resources setup into the setup_kernel_resources() helper function
x86/boot: Move setting of memblock parameters to e820__memblock_setup()
|
