summaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)AuthorFilesLines
2018-01-14x86/jailhouse: Set up timekeepingJan Kiszka1-0/+17
Get the precalibrated frequencies for the TSC and the APIC timer from the Jailhouse platform info and set the kernel values accordingly. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: jailhouse-dev@googlegroups.com Link: https://lkml.kernel.org/r/b2557426332fc337a74d3141cb920f7dce9ad601.1511770314.git.jan.kiszka@siemens.com
2018-01-14x86/jailhouse: Enable PMTIMERJan Kiszka2-0/+5
Jailhouse exposes the PMTIMER as only reference clock to all cells. Pick up its address from the setup data. Allow to enable the Linux support of it by relaxing its strict dependency on ACPI. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: jailhouse-dev@googlegroups.com Link: https://lkml.kernel.org/r/6d5c3fadd801eb3fba9510e2d3db14a9c404a1a0.1511770314.git.jan.kiszka@siemens.com
2018-01-14x86/jailhouse: Enable APIC and SMP supportJan Kiszka2-1/+45
Register the APIC which Jailhouse always exposes at 0xfee00000 if in xAPIC mode or via MSRs as x2APIC. The latter is only available if it was already activated because there is no support for switching its mode during runtime. Jailhouse requires the APIC to be operated in phys-flat mode. Ensure that this mode is selected by Linux. The available CPUs are taken from the setup data structure that the loader filled and registered with the kernel. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: jailhouse-dev@googlegroups.com Link: https://lkml.kernel.org/r/8b2255da0a9856c530293a67aa9d6addfe102a2b.1511770314.git.jan.kiszka@siemens.com
2018-01-14x86/jailhouse: Add infrastructure for running in non-root cellJan Kiszka7-0/+136
The Jailhouse hypervisor is able to statically partition a multicore system into multiple so-called cells. Linux is used as boot loader and continues to run in the root cell after Jailhouse is enabled. Linux can also run in non-root cells. Jailhouse does not emulate usual x86 devices. It also provides no complex ACPI but basic platform information that the boot loader forwards via setup data. This adds the infrastructure to detect when running in a non-root cell so that the platform can be configured as required in succeeding steps. Support is limited to x86-64 so far, primarily because no boot loader stub exists for i386 and, thus, we wouldn't be able to test the 32-bit path. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: jailhouse-dev@googlegroups.com Link: https://lkml.kernel.org/r/7f823d077b38b1a70c526b40b403f85688c137d3.1511770314.git.jan.kiszka@siemens.com
2018-01-14x86: Introduce and use MP IRQ trigger and polarity definesJan Kiszka4-25/+37
MP_IRQDIR_* constants pointed in the right direction but remained unused so far: It's cleaner to use symbolic values for the IRQ flags in the MP config table. That also saves some comments. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: jailhouse-dev@googlegroups.com Link: https://lkml.kernel.org/r/60809926663a1d38e2a5db47d020d6e2e7a70019.1511770314.git.jan.kiszka@siemens.com
2018-01-14x86/platform: Control warm reset setup via legacy feature flagJan Kiszka4-2/+5
Allow to turn off the setup of BIOS-managed warm reset via a new flag in x86_legacy_features. Besides the UV1, the upcoming jailhose guest support needs this switched off. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: jailhouse-dev@googlegroups.com Link: https://lkml.kernel.org/r/44376558129d70a2c1527959811371ef4b82e829.1511770314.git.jan.kiszka@siemens.com
2018-01-14x86/apic: Install an empty physflat_init_apic_ldrJan Kiszka1-2/+10
As the comment already stated, there is no need for setting up LDR (and DFR) in physflat mode as it remains unused (see SDM, 10.6.2.1). flat_init_apic_ldr only served as a placeholder for a nop operation so far, causing no harm. That will change when running over the Jailhouse hypervisor. Here we must not touch LDR in a way that destroys the mapping originally set up by the Linux root cell. Jailhouse enforces this setting in order to efficiently validate any IPI requests sent by a cell. Avoid a needless clash caused by flat_init_apic_ldr by installing a true nop handler. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: jailhouse-dev@googlegroups.com Link: https://lkml.kernel.org/r/f9867d294cdae4d45ed89d3a2e6adb524f4f6794.1511770314.git.jan.kiszka@siemens.com
2018-01-14x86/tsc: Introduce early tsc clocksourcePeter Zijlstra1-10/+33
Without TSC_KNOWN_FREQ the TSC clocksource is registered so late that the kernel first switches to the HPET. Using HPET on large CPU count machines is undesirable. Therefore register a tsc-early clocksource using the preliminary tsc_khz from quick calibration. Then when the final TSC calibration is done, it can switch to the tuned frequency. The only notably problem is that the real tsc clocksource must be marked with CLOCK_SOURCE_VALID_FOR_HRES, otherwise it will not be selected when unregistering tsc-early. tsc-early cannot be left registered, because then the clocksource code would fall back to it when we tsc clocksource is marked unstable later. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: len.brown@intel.com Cc: rui.zhang@intel.com Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20171222092243.431585460@infradead.org
2018-01-14x86/time: Unconditionally register legacy timer interruptPeter Zijlstra1-3/+6
Even without a PIC/PIT the legacy timer interrupt is required for HPET in legacy replacement mode. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: len.brown@intel.com Cc: rui.zhang@intel.com Link: https://lkml.kernel.org/r/20171222092243.382623763@infradead.org
2018-01-14x86/tsc: Allow TSC calibration without PITPeter Zijlstra2-0/+23
Zhang Rui reported that a Surface Pro 4 will fail to boot with lapic=notscdeadline. Part of the problem is that that machine doesn't have a PIT. If, for some reason, the TSC init has to fall back to TSC calibration, it relies on the PIT to be present. Allow TSC calibration to reliably fall back to HPET. The below results in an accurate TSC measurement when forced on a IVB: tsc: Unable to calibrate against PIT tsc: No reference (HPET/PMTIMER) available tsc: Unable to calibrate against PIT tsc: using HPET reference calibration tsc: Detected 2792.451 MHz processor Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: len.brown@intel.com Cc: rui.zhang@intel.com Link: https://lkml.kernel.org/r/20171222092243.333145937@infradead.org
2018-01-14x86/idt: Mark IDT tables __initconstAndi Kleen1-6/+6
const variables must use __initconst, not __initdata. Fix this up for the IDT tables, which got it consistently wrong. Fixes: 16bc18d895ce ("x86/idt: Move 32-bit idt_descr to C code") Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20171222001821.2157-7-andi@firstfloor.org
2018-01-14x86/extable: Mark exception handler functions visibleAndi Kleen1-17/+17
Mark the C exception handler functions that are directly called through exception tables visible. LTO needs to know they are accessed from assembler. [ tglx: Mopped up the wrecked argument alignment. Sigh.... ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20171222001821.2157-6-andi@firstfloor.org
2018-01-14x86/timer: Don't inline __const_udelayAndi Kleen1-1/+1
__const_udelay is marked inline, and LTO will happily inline it everywhere Dropping the inline saves ~44k text in a LTO build. 13999560 1740864 1499136 17239560 1070e08 vmlinux-with-udelay-inline 13954764 1736768 1499136 17190668 1064f0c vmlinux-wo-udelay-inline Inlining it has no advantage in general, so its the right thing to do. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20171222001821.2157-2-andi@firstfloor.org
2018-01-14Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds33-84/+657
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti updates from Thomas Gleixner: "This contains: - a PTI bugfix to avoid setting reserved CR3 bits when PCID is disabled. This seems to cause issues on a virtual machine at least and is incorrect according to the AMD manual. - a PTI bugfix which disables the perf BTS facility if PTI is enabled. The BTS AUX buffer is not globally visible and causes the CPU to fault when the mapping disappears on switching CR3 to user space. A full fix which restores BTS on PTI is non trivial and will be worked on. - PTI bugfixes for EFI and trusted boot which make sure that the user space visible page table entries have the NX bit cleared - removal of dead code in the PTI pagetable setup functions - add PTI documentation - add a selftest for vsyscall to verify that the kernel actually implements what it advertises. - a sysfs interface to expose vulnerability and mitigation information so there is a coherent way for users to retrieve the status. - the initial spectre_v2 mitigations, aka retpoline: + The necessary ASM thunk and compiler support + The ASM variants of retpoline and the conversion of affected ASM code + Make LFENCE serializing on AMD so it can be used as speculation trap + The RSB fill after vmexit - initial objtool support for retpoline As I said in the status mail this is the most of the set of patches which should go into 4.15 except two straight forward patches still on hold: - the retpoline add on of LFENCE which waits for ACKs - the RSB fill after context switch Both should be ready to go early next week and with that we'll have covered the major holes of spectre_v2 and go back to normality" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) x86,perf: Disable intel_bts when PTI security/Kconfig: Correct the Documentation reference for PTI x86/pti: Fix !PCID and sanitize defines selftests/x86: Add test_vsyscall x86/retpoline: Fill return stack buffer on vmexit x86/retpoline/irq32: Convert assembler indirect jumps x86/retpoline/checksum32: Convert assembler indirect jumps x86/retpoline/xen: Convert Xen hypercall indirect jumps x86/retpoline/hyperv: Convert assembler indirect jumps x86/retpoline/ftrace: Convert ftrace assembler indirect jumps x86/retpoline/entry: Convert entry assembler indirect jumps x86/retpoline/crypto: Convert crypto assembler indirect jumps x86/spectre: Add boot time option to select Spectre v2 mitigation x86/retpoline: Add initial retpoline support objtool: Allow alternatives to be ignored objtool: Detect jumps to retpoline thunks x86/pti: Make unpoison of pgd for trusted boot work for real x86/alternatives: Fix optimize_nops() checking sysfs/cpu: Fix typos in vulnerability documentation x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC ...
2018-01-14Revert "x86/apic: Remove init_bsp_APIC()"Ville Syrjälä3-0/+53
This reverts commit b371ae0d4a194b178817b0edfb6a7395c7aec37a. It causes boot hangs on old P3/P4 systems when the local APIC is enforced in UP mode. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: yinghai@kernel.org Cc: bhe@redhat.com Link: https://lkml.kernel.org/r/20171128145350.21560-1-ville.syrjala@linux.intel.com
2018-01-14x86/mm/pkeys: Fix fill_sig_info_pkeyEric W. Biederman1-3/+4
SEGV_PKUERR is a signal specific si_code which happens to have the same numeric value as several others: BUS_MCEERR_AR, ILL_ILLTRP, FPE_FLTOVF, TRAP_HWBKPT, CLD_TRAPPED, POLL_ERR, SEGV_THREAD_ID, as such it is not safe to just test the si_code the signal number must also be tested to prevent a false positive in fill_sig_info_pkey. This error was by inspection, and BUS_MCEERR_AR appears to be a real candidate for confusion. So pass in si_signo and check for SIG_SEGV to verify that it is actually a SEGV_PKUERR Fixes: 019132ff3daf ("x86/mm/pkeys: Fill in pkey field in siginfo") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180112203135.4669-2-ebiederm@xmission.com
2018-01-14x86/tsc: Print tsc_khz, when it differs from cpu_khzLen Brown1-0/+6
If CPU and TSC frequency are the same the printout of the CPU frequency is valid for the TSC as well: tsc: Detected 2900.000 MHz processor If the TSC frequency is different there is no information in dmesg. Add a conditional printout: tsc: Detected 2904.000 MHz TSC Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Link: https://lkml.kernel.org/r/537b342debcd8e8aebc8d631015dcdf9f9ba8a26.1513920414.git.len.brown@intel.com
2018-01-14x86/tsc: Fix erroneous TSC rate on Skylake XeonLen Brown1-1/+0
The INTEL_FAM6_SKYLAKE_X hardcoded crystal_khz value of 25MHZ is problematic: - SKX workstations (with same model # as server variants) use a 24 MHz crystal. This results in a -4.0% time drift rate on SKX workstations. - SKX servers subject the crystal to an EMI reduction circuit that reduces its actual frequency by (approximately) -0.25%. This results in -1 second per 10 minute time drift as compared to network time. This issue can also trigger a timer and power problem, on configurations that use the LAPIC timer (versus the TSC deadline timer). Clock ticks scheduled with the LAPIC timer arrive a few usec before the time they are expected (according to the slow TSC). This causes Linux to poll-idle, when it should be in an idle power saving state. The idle and clock code do not graciously recover from this error, sometimes resulting in significant polling and measurable power impact. Stop using native_calibrate_tsc() for INTEL_FAM6_SKYLAKE_X. native_calibrate_tsc() will return 0, boot will run with tsc_khz = cpu_khz, and the TSC refined calibration will update tsc_khz to correct for the difference. [ tglx: Sanitized change log ] Fixes: 6baf3d61821f ("x86/tsc: Add additional Intel CPU models to the crystal quirk list") Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/ff6dcea166e8ff8f2f6a03c17beab2cb436aa779.1513920414.git.len.brown@intel.com
2018-01-14x86/tsc: Future-proof native_calibrate_tsc()Len Brown1-0/+2
If the crystal frequency cannot be determined via CPUID(15).crystal_khz or the built-in table then native_calibrate_tsc() will still set the X86_FEATURE_TSC_KNOWN_FREQ flag which prevents the refined TSC calibration. As a consequence such systems use cpu_khz for the TSC frequency which is incorrect when cpu_khz != tsc_khz resulting in time drift. Return early when the crystal frequency cannot be retrieved without setting the X86_FEATURE_TSC_KNOWN_FREQ flag. This ensures that the refined TSC calibration is invoked. [ tglx: Steam-blastered changelog. Sigh ] Fixes: 4ca4df0b7eb0 ("x86/tsc: Mark TSC frequency determined by CPUID as known") Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: Bin Gao <bin.gao@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/0fe2503aa7d7fc69137141fc705541a78101d2b9.1513920414.git.len.brown@intel.com
2018-01-14x86,perf: Disable intel_bts when PTIPeter Zijlstra1-0/+18
The intel_bts driver does not use the 'normal' BTS buffer which is exposed through the cpu_entry_area but instead uses the memory allocated for the perf AUX buffer. This obviously comes apart when using PTI because then the kernel mapping; which includes that AUX buffer memory; disappears. Fixing this requires to expose a mapping which is visible in all context and that's not trivial. As a quick fix disable this driver when PTI is enabled to prevent malfunction. Fixes: 385ce0ea4c07 ("x86/mm/pti: Add Kconfig") Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Robert Święcki <robert@swiecki.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: greg@kroah.com Cc: hughd@google.com Cc: luto@amacapital.net Cc: Vince Weaver <vince@deater.net> Cc: torvalds@linux-foundation.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180114102713.GB6166@worktop.programming.kicks-ass.net
2018-01-14x86/pti: Fix !PCID and sanitize definesThomas Gleixner3-21/+23
The switch to the user space page tables in the low level ASM code sets unconditionally bit 12 and bit 11 of CR3. Bit 12 is switching the base address of the page directory to the user part, bit 11 is switching the PCID to the PCID associated with the user page tables. This fails on a machine which lacks PCID support because bit 11 is set in CR3. Bit 11 is reserved when PCID is inactive. While the Intel SDM claims that the reserved bits are ignored when PCID is disabled, the AMD APM states that they should be cleared. This went unnoticed as the AMD APM was not checked when the code was developed and reviewed and test systems with Intel CPUs never failed to boot. The report is against a Centos 6 host where the guest fails to boot, so it's not yet clear whether this is a virt issue or can happen on real hardware too, but thats irrelevant as the AMD APM clearly ask for clearing the reserved bits. Make sure that on non PCID machines bit 11 is not set by the page table switching code. Andy suggested to rename the related bits and masks so they are clearly describing what they should be used for, which is done as well for clarity. That split could have been done with alternatives but the macro hell is horrible and ugly. This can be done on top if someone cares to remove the extra orq. For now it's a straight forward fix. Fixes: 6fd166aae78c ("x86/mm: Use/Fix PCID to optimize user/kernel switches") Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable <stable@vger.kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Willy Tarreau <w@1wt.eu> Cc: David Woodhouse <dwmw@amazon.co.uk> Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801140009150.2371@nanos
2018-01-14Merge tag 'pci-v4.15-fixes-2' of ↵Linus Torvalds3-11/+24
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Fix AMD boot regression due to 64-bit window conflicting with system memory (Christian König)" * tag 'pci-v4.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: Move and shrink AMD 64-bit window to avoid conflict x86/PCI: Add "pci=big_root_window" option for AMD 64-bit windows
2018-01-13error-injection: Separate error-injection from kprobeMasami Hiramatsu5-15/+34
Since error-injection framework is not limited to be used by kprobes, nor bpf. Other kernel subsystems can use it freely for checking safeness of error-injection, e.g. livepatch, ftrace etc. So this separate error-injection framework from kprobes. Some differences has been made: - "kprobe" word is removed from any APIs/structures. - BPF_ALLOW_ERROR_INJECTION() is renamed to ALLOW_ERROR_INJECTION() since it is not limited for BPF too. - CONFIG_FUNCTION_ERROR_INJECTION is the config item of this feature. It is automatically enabled if the arch supports error injection feature for kprobe or ftrace etc. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-13tracing/kprobe: bpf: Check error injectable event is on function entryMasami Hiramatsu3-17/+15
Check whether error injectable event is on function entry or not. Currently it checks the event is ftrace-based kprobes or not, but that is wrong. It should check if the event is on the entry of target function. Since error injection will override a function to just return with modified return value, that operation must be done before the target function starts making stackframe. As a side effect, bpf error injection is no need to depend on function-tracer. It can work with sw-breakpoint based kprobe events too. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-12signal: Remove _sys_private and _overrun_incr from struct compat_siginfoEric W. Biederman2-3/+1
We have never passed either field to or from userspace so just remove them. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-12x86/mm/pkeys: Fix fill_sig_info_pkeyEric W. Biederman1-3/+4
SEGV_PKUERR is a signal specific si_code which happens to have the same numeric value as several others: BUS_MCEERR_AR, ILL_ILLTRP, FPE_FLTOVF, TRAP_HWBKPT, CLD_TRAPPED, POLL_ERR, SEGV_THREAD_ID, as such it is not safe to just test the si_code the signal number must also be tested to prevent a false positive in fill_sig_info_pkey. I found this error by inspection, and BUS_MCEERR_AR appears to be a real candidate for confusion. So pass in si_signo and fix it. Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Fixes: 019132ff3daf ("x86/mm/pkeys: Fill in pkey field in siginfo") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two pending (non-PTI) x86 fixes: - an Intel-MID crash fix - and an Intel microcode loader blacklist quirk to avoid a problematic revision" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/intel-mid: Revert "Make 'bt_sfi_data' const" x86/microcode/intel: Extend BDW late-loading with a revision check
2018-01-12Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "No functional effects intended: removes leftovers from recent lockdep and refcounts work" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/refcounts: Remove stale comment from the ARCH_HAS_REFCOUNT Kconfig entry locking/lockdep: Remove cross-release leftovers locking/Documentation: Remove stale crossrelease_fullstack parameter
2018-01-12Merge tag 'for-linus-4.15-rc8-tag' of ↵Linus Torvalds2-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains two build fixes for clang and two fixes for rather unlikely situations in the Xen gntdev driver" * tag 'for-linus-4.15-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/gntdev: Fix partial gntdev_mmap() cleanup xen/gntdev: Fix off-by-one error when unmapping with holes x86: xen: remove the use of VLAIS x86/xen/time: fix section mismatch for xen_init_time_ops()
2018-01-12perf/x86/rapl: Fix Haswell and Broadwell server RAPL eventKan Liang1-2/+2
Perf-fuzzer triggers non-existent MSR access in RAPL driver on Haswell-EX. Haswell/Broadwell server and client have differnt RAPL events. Since 'commit 7f2236d0bf9a ("perf/x86/rapl: Use Intel family macros for RAPL")', it accidentally assign RAPL client events to server. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linux-kernel@vger.kernel.org Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-12crypto: x86/salsa20 - cleanup and convert to skcipher APIEric Biggers3-359/+44
Convert salsa20-asm from the deprecated "blkcipher" API to the "skcipher" API, in the process fixing it up to use the generic helpers. This allows removing the salsa20_keysetup() and salsa20_ivsetup() assembly functions, which aren't performance critical; the C versions do just fine. This also fixes the same bug that salsa20-generic had, where the state array was being maintained directly in the transform context rather than on the stack or in the request context. Thus, if multiple threads used the same Salsa20 transform concurrently they produced the wrong results. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-12crypto: hash - annotate algorithms taking optional keyEric Biggers2-0/+2
We need to consistently enforce that keyed hashes cannot be used without setting the key. To do this we need a reliable way to determine whether a given hash algorithm is keyed or not. AF_ALG currently does this by checking for the presence of a ->setkey() method. However, this is actually slightly broken because the CRC-32 algorithms implement ->setkey() but can also be used without a key. (The CRC-32 "key" is not actually a cryptographic key but rather represents the initial state. If not overridden, then a default initial state is used.) Prepare to fix this by introducing a flag CRYPTO_ALG_OPTIONAL_KEY which indicates that the algorithm has a ->setkey() method, but it is not required to be called. Then set it on all the CRC-32 algorithms. The same also applies to the Adler-32 implementation in Lustre. Also, the cryptd and mcryptd templates have to pass through the flag from their underlying algorithm. Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-12crypto: poly1305 - remove ->setkey() methodEric Biggers1-1/+0
Since Poly1305 requires a nonce per invocation, the Linux kernel implementations of Poly1305 don't use the crypto API's keying mechanism and instead expect the key and nonce as the first 32 bytes of the data. But ->setkey() is still defined as a stub returning an error code. This prevents Poly1305 from being used through AF_ALG and will also break it completely once we start enforcing that all crypto API users (not just AF_ALG) call ->setkey() if present. Fix it by removing crypto_poly1305_setkey(), leaving ->setkey as NULL. Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-12x86/retpoline: Fill return stack buffer on vmexitDavid Woodhouse3-1/+85
In accordance with the Intel and AMD documentation, we need to overwrite all entries in the RSB on exiting a guest, to prevent malicious branch target predictions from affecting the host kernel. This is needed both for retpoline and for IBRS. [ak: numbers again for the RSB stuffing labels] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515755487-8524-1-git-send-email-dwmw@amazon.co.uk
2018-01-12x86/PCI: Deprecate pci_get_bus_and_slot()Sinan Kaya1-1/+2
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers. Getting ready to remove pci_get_bus_and_slot() function in favor of pci_get_domain_bus_and_slot(). Use domain number of 0 as the domain number is not available in struct irq_routing_table. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-12x86/retpoline/irq32: Convert assembler indirect jumpsAndi Kleen1-4/+5
Convert all indirect jumps in 32bit irq inline asm code to use non speculative sequences. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-12-git-send-email-dwmw@amazon.co.uk
2018-01-12x86/retpoline/checksum32: Convert assembler indirect jumpsDavid Woodhouse1-3/+4
Convert all indirect jumps in 32bit checksum assembler code to use non-speculative sequences when CONFIG_RETPOLINE is enabled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-11-git-send-email-dwmw@amazon.co.uk
2018-01-12x86/retpoline/xen: Convert Xen hypercall indirect jumpsDavid Woodhouse1-2/+3
Convert indirect call in Xen hypercall to use non-speculative sequence, when CONFIG_RETPOLINE is enabled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-10-git-send-email-dwmw@amazon.co.uk
2018-01-12x86/retpoline/hyperv: Convert assembler indirect jumpsDavid Woodhouse1-8/+10
Convert all indirect jumps in hyperv inline asm code to use non-speculative sequences when CONFIG_RETPOLINE is enabled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-9-git-send-email-dwmw@amazon.co.uk
2018-01-12x86/retpoline/ftrace: Convert ftrace assembler indirect jumpsDavid Woodhouse2-6/+8
Convert all indirect jumps in ftrace assembler code to use non-speculative sequences when CONFIG_RETPOLINE is enabled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-8-git-send-email-dwmw@amazon.co.uk
2018-01-12x86/retpoline/entry: Convert entry assembler indirect jumpsDavid Woodhouse2-5/+12
Convert indirect jumps in core 32/64bit entry assembler code to use non-speculative sequences when CONFIG_RETPOLINE is enabled. Don't use CALL_NOSPEC in entry_SYSCALL_64_fastpath because the return address after the 'call' instruction must be *precisely* at the .Lentry_SYSCALL_64_after_fastpath label for stub_ptregs_64 to work, and the use of alternatives will mess that up unless we play horrid games to prepend with NOPs and make the variants the same length. It's not worth it; in the case where we ALTERNATIVE out the retpoline, the first instruction at __x86.indirect_thunk.rax is going to be a bare jmp *%rax anyway. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-7-git-send-email-dwmw@amazon.co.uk
2018-01-12x86/retpoline/crypto: Convert crypto assembler indirect jumpsDavid Woodhouse4-5/+9
Convert all indirect jumps in crypto assembler code to use non-speculative sequences when CONFIG_RETPOLINE is enabled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-6-git-send-email-dwmw@amazon.co.uk
2018-01-12x86/spectre: Add boot time option to select Spectre v2 mitigationDavid Woodhouse3-5/+167
Add a spectre_v2= option to select the mitigation used for the indirect branch speculation vulnerability. Currently, the only option available is retpoline, in its various forms. This will be expanded to cover the new IBRS/IBPB microcode features. The RETPOLINE_AMD feature relies on a serializing LFENCE for speculation control. For AMD hardware, only set RETPOLINE_AMD if LFENCE is a serializing instruction, which is indicated by the LFENCE_RDTSC feature. [ tglx: Folded back the LFENCE/AMD fixes and reworked it so IBRS integration becomes simple ] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-5-git-send-email-dwmw@amazon.co.uk
2018-01-12x86/retpoline: Add initial retpoline supportDavid Woodhouse8-0/+231
Enable the use of -mindirect-branch=thunk-extern in newer GCC, and provide the corresponding thunks. Provide assembler macros for invoking the thunks in the same way that GCC does, from native and inline assembler. This adds X86_FEATURE_RETPOLINE and sets it by default on all CPUs. In some circumstances, IBRS microcode features may be used instead, and the retpoline can be disabled. On AMD CPUs if lfence is serialising, the retpoline can be dramatically simplified to a simple "lfence; jmp *\reg". A future patch, after it has been verified that lfence really is serialising in all circumstances, can enable this by setting the X86_FEATURE_RETPOLINE_AMD feature bit in addition to X86_FEATURE_RETPOLINE. Do not align the retpoline in the altinstr section, because there is no guarantee that it stays aligned when it's copied over the oldinstr during alternative patching. [ Andi Kleen: Rename the macros, add CONFIG_RETPOLINE option, export thunks] [ tglx: Put actual function CALL/JMP in front of the macros, convert to symbolic labels ] [ dwmw2: Convert back to numeric labels, merge objtool fixes ] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-4-git-send-email-dwmw@amazon.co.uk
2018-01-12x86/pti: Make unpoison of pgd for trusted boot work for realDave Hansen1-1/+11
The inital fix for trusted boot and PTI potentially misses the pgd clearing if pud_alloc() sets a PGD. It probably works in *practice* because for two adjacent calls to map_tboot_page() that share a PGD entry, the first will clear NX, *then* allocate and set the PGD (without NX clear). The second call will *not* allocate but will clear the NX bit. Defer the NX clearing to a point after it is known that all top-level allocations have occurred. Add a comment to clarify why. [ tglx: Massaged changelog ] Fixes: 262b6b30087 ("x86/tboot: Unbreak tboot with PTI enabled") Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: "Tim Chen" <tim.c.chen@linux.intel.com> Cc: gnomes@lxorguk.ukuu.org.uk Cc: peterz@infradead.org Cc: ning.sun@intel.com Cc: tboot-devel@lists.sourceforge.net Cc: andi@firstfloor.org Cc: luto@kernel.org Cc: law@redhat.com Cc: pbonzini@redhat.com Cc: torvalds@linux-foundation.org Cc: gregkh@linux-foundation.org Cc: dwmw@amazon.co.uk Cc: nickc@redhat.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180110224939.2695CD47@viggo.jf.intel.com
2018-01-11x86/PCI: Move and shrink AMD 64-bit window to avoid conflict=?UTF-8?q?Christian=20K=C3=B6nig?=1-10/+12
Avoid problems with BIOS implementations which don't report all used resources to the OS by only allocating a 256GB window directly below the hardware limit (from the BKDG, sec 2.4.6). Fixes a silent reboot loop reported by Aaro Koskinen <aaro.koskinen@iki.fi> on an AMD-based MSI MS-7699/760GA-P43(FX) system. This was apparently caused by RAM or other unreported hardware that conflicted with the new window. Link: https://support.amd.com/TechDocs/49125_15h_Models_30h-3Fh_BKDG.pdf Link: https://lkml.kernel.org/r/20180105220412.fzpwqe4zljdawr36@darkstar.musicnaut.iki.fi Fixes: fa564ad96366 ("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Christian König <christian.koenig@amd.com> [bhelgaas: changelog, comment, Fixes:] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-01-11x86/PCI: Add "pci=big_root_window" option for AMD 64-bit windows=?UTF-8?q?Christian=20K=C3=B6nig?=3-1/+12
Only try to enable a 64-bit window on AMD CPUs when "pci=big_root_window" is specified. This taints the kernel because the new 64-bit window uses address space we don't know anything about, and it may contain unreported devices or memory that would conflict with the window. The pci_amd_enable_64bit_bar() quirk that enables the window is specific to AMD CPUs. The generic solution would be to have the firmware enable the window and describe it in the host bridge's _CRS method, or at least describe it in the _PRS method so the OS would have the option of enabling it. Signed-off-by: Christian König <christian.koenig@amd.com> [bhelgaas: changelog, extend doc, mention taint in dmesg] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-01-11Merge branch 'kvm-insert-lfence' into kvm-masterPaolo Bonzini1-2/+10
Topic branch for CVE-2017-5753, avoiding conflicts in the next merge window.
2018-01-11KVM: x86: Add memory barrier on vmcs field lookupAndrew Honig1-2/+10
This adds a memory barrier when performing a lookup into the vmcs_field_to_offset_table. This is related to CVE-2017-5753. Signed-off-by: Andrew Honig <ahonig@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-11KVM: x86: emulate #UD while in guest modePaolo Bonzini2-12/+2
This reverts commits ae1f57670703656cc9f293722c3b8b6782f8ab3f and ac9b305caa0df6f5b75d294e4b86c1027648991e. If the hardware doesn't support MOVBE, but L0 sets CPUID.01H:ECX.MOVBE in L1's emulated CPUID information, then L1 is likely to pass that CPUID bit through to L2. L2 will expect MOVBE to work, but if L1 doesn't intercept #UD, then any MOVBE instruction executed in L2 will raise #UD, and the exception will be delivered in L2. Commit ac9b305caa0df6f5b75d294e4b86c1027648991e is a better and more complete version of ae1f57670703 ("KVM: nVMX: Do not emulate #UD while in guest mode"); however, neither considers the above case. Suggested-by: Jim Mattson <jmattson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 15:44:46 +0300