| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
do_machine_check() can be raised in almost any context including the most
fragile ones. Prevent kprobes and tracing.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200225220216.315548935@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
Pull EFI updates for v5.7 from Ard Biesheuvel:
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Chris Wilson reported splats from running the thermal throttling
workqueue callback on offlined CPUs. The problem is that that callback
should not even run on offlined CPUs but it happens nevertheless because
the offlining callback thermal_throttle_offline() does not symmetrically
undo the setup work done in its onlining counterpart. IOW,
1. The thermal interrupt vector should be masked out before ...
2. ... cancelling any pending work synchronously so that no new work is
enqueued anymore.
Do those things and fix the issue properly.
[ bp: Write commit message. ]
Fixes: f6656208f04e ("x86/mce/therm_throt: Optimize notifications of thermal throttle")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/158120068234.18291.7938335950259651295@skylake-alporthouse-com
|
|
Now that .eh_frame sections for the files in setup.elf and realmode.elf
are not generated anymore, the linker scripts don't need the special
output section name /DISCARD/ any more.
Remove the one in the main kernel linker script as well, since there are
no .eh_frame sections already, and fix up a comment referencing .eh_frame.
Update the comment in asm/dwarf2.h referring to .eh_frame so it continues
to make sense, as well as being more specific.
[ bp: Touch up commit message. ]
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200224232129.597160-3-nivedita@alum.mit.edu
|
|
Alex Shi reported the pkey macros above arch_set_user_pkey_access()
to be unused. They are unused, and even refer to a nonexistent
CONFIG option.
But, they might have served a good use, which was to ensure that
the code does not try to set values that would not fit in the
PKRU register. As it stands, a too-large 'pkey' value would
be likely to silently overflow the u32 new_pkru_bits.
Add a check to look for overflows. Also add a comment to remind
any future developer to closely examine the types used to store
pkey values if arch_max_pkey() ever changes.
This boots and passes the x86 pkey selftests.
Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200122165346.AD4DA150@viggo.jf.intel.com
|
|
The e820 table for the kexec kernel unconditionally marks setup_data as
reserved because the second kernel can reuse setup_data passed by the
1st kernel's boot loader, for example SETUP_PCI marked regions like PCI
BIOS, etc.
SETUP_EFI types, however, are used by kexec itself to enable EFI in the
2nd kernel. Thus, it is pointless to add this type of setup_data to the
kexec e820 table as reserved.
IOW, what happens is this:
- 1st physical boot: no SETUP_EFI.
- kexec loads a new kernel and prepares a SETUP_EFI setup_data blob, then
reboots the machine.
- 2nd kernel sees SETUP_EFI, reserves it both in the e820 and in the
kexec e820 table.
- If another kexec load is executed, it prepares a new SETUP_EFI blob and
then reboots the machine into the new kernel.
5. The 3rd kexec-ed kernel has two SETUP_EFI ranges reserved. And so on...
Thus skip SETUP_EFI while reserving setup_data in the e820_table_kexec
table because it is not needed.
[ bp: Heavily massage commit message, shorten line and improve comment. ]
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200212110424.GA2938@dhcp-128-65.nay.redhat.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Replace the EFI runtime services check with one that tells us whether
EFI GetVariable() is implemented by the firmware.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Instead of going through the EFI system table each time, just copy the
runtime services table pointer into struct efi directly. This is the
last use of the system table pointer in struct efi, allowing us to
drop it in a future patch, along with a fair amount of quirky handling
of the translated address.
Note that usually, the runtime services pointer changes value during
the call to SetVirtualAddressMap(), so grab the updated value as soon
as that call returns. (Mixed mode uses a 1:1 mapping, and kexec boot
enters with the updated address in the system table, so in those cases,
we don't need to do anything here)
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
There is some code that exposes physical addresses of certain parts of
the EFI firmware implementation via sysfs nodes. These nodes are only
used on x86, and are of dubious value to begin with, so let's move
their handling into the x86 arch code.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Since commit 33b85447fa61946b ("efi/x86: Drop two near identical versions
of efi_runtime_init()"), we no longer map the EFI runtime services table
before calling SetVirtualAddressMap(), which means we don't need the 1:1
mapped physical address of this table, and so there is no point in passing
the address via EFI setup data on kexec boot.
Note that the kexec tools will still look for this address in sysfs, so
we still need to provide it.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fixes from Thomas Gleixner:
"Two fixes for the AMD MCE driver:
- Populate the per CPU MCA bank descriptor pointer only after it has
been completely set up to prevent a use-after-free in case that one
of the subsequent initialization step fails
- Implement a proper release function for the sysfs entries of MCA
threshold controls instead of freeing the memory right in the CPU
teardown code, which leads to another use-after-free when the
associated sysfs file is opened and accessed"
* tag 'ras-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/amd: Fix kobject lifetime
x86/mce/amd: Publish the bank pointer only after setup has succeeded
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two fixes for x86:
- Remove the __force_oder definiton from the kaslr boot code as it is
already defined in the page table code which makes GCC 10 builds
fail because it changed the default to -fno-common.
- Address the AMD erratum 1054 concerning the IRPERF capability and
enable the Instructions Retired fixed counter on machines which are
not affected by the erratum"
* tag 'x86-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF
x86/boot/compressed: Don't declare __force_order in kaslr_64.c
|
|
Commit a24e785111a3 ("i386: paravirt boot sequence") added this flag for
use by paravirtualized environments such as Xen. However, Xen never made
use of this flag [1], and it was only ever used by lguest [2].
Commit ecda85e70277 ("x86/lguest: Remove lguest support") removed
lguest, so KEEP_SEGMENTS has lost its last user.
[1] https://lore.kernel.org/lkml/4D4B097C.5050405@goop.org
[2] https://www.mail-archive.com/lguest@lists.ozlabs.org/msg00469.html
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200202171353.3736319-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
A split-lock occurs when an atomic instruction operates on data that spans
two cache lines. In order to maintain atomicity the core takes a global bus
lock.
This is typically >1000 cycles slower than an atomic operation within a
cache line. It also disrupts performance on other cores (which must wait
for the bus lock to be released before their memory operations can
complete). For real-time systems this may mean missing deadlines. For other
systems it may just be very annoying.
Some CPUs have the capability to raise an #AC trap when a split lock is
attempted.
Provide a command line option to give the user choices on how to handle
this:
split_lock_detect=
off - not enabled (no traps for split locks)
warn - warn once when an application does a
split lock, but allow it to continue
running.
fatal - Send SIGBUS to applications that cause split lock
On systems that support split lock detection the default is "warn". Note
that if the kernel hits a split lock in any mode other than "off" it will
OOPs.
One implementation wrinkle is that the MSR to control the split lock
detection is per-core, not per thread. This might result in some short
lived races on HT systems in "warn" mode if Linux tries to enable on one
thread while disabling on the other. Race analysis by Sean Christopherson:
- Toggling of split-lock is only done in "warn" mode. Worst case
scenario of a race is that a misbehaving task will generate multiple
#AC exceptions on the same instruction. And this race will only occur
if both siblings are running tasks that generate split-lock #ACs, e.g.
a race where sibling threads are writing different values will only
occur if CPUx is disabling split-lock after an #AC and CPUy is
re-enabling split-lock after *its* previous task generated an #AC.
- Transitioning between off/warn/fatal modes at runtime isn't supported
and disabling is tracked per task, so hardware will always reach a steady
state that matches the configured mode. I.e. split-lock is guaranteed to
be enabled in hardware once all _TIF_SLD threads have been scheduled out.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20200126200535.GB30377@agluck-desk2.amr.corp.intel.com
|
|
Commit
aaf248848db50 ("perf/x86/msr: Add AMD IRPERF (Instructions Retired)
performance counter")
added support for access to the free-running counter via 'perf -e
msr/irperf/', but when exercised, it always returns a 0 count:
BEFORE:
$ perf stat -e instructions,msr/irperf/ true
Performance counter stats for 'true':
624,833 instructions
0 msr/irperf/
Simply set its enable bit - HWCR bit 30 - to make it start counting.
Enablement is restricted to all machines advertising IRPERF capability,
except those susceptible to an erratum that makes the IRPERF return
bad values.
That erratum occurs in Family 17h models 00-1fh [1], but not in F17h
models 20h and above [2].
AFTER (on a family 17h model 31h machine):
$ perf stat -e instructions,msr/irperf/ true
Performance counter stats for 'true':
621,690 instructions
622,490 msr/irperf/
[1] Revision Guide for AMD Family 17h Models 00h-0Fh Processors
[2] Revision Guide for AMD Family 17h Models 30h-3Fh Processors
The revision guides are available from the bugzilla Link below.
[ bp: Massage commit message. ]
Fixes: aaf248848db50 ("perf/x86/msr: Add AMD IRPERF (Instructions Retired) performance counter")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: http://lkml.kernel.org/r/20200214201805.13830-1-kim.phillips@amd.com
|
|
A user has reported that they are seeing spurious corrected errors on
their hardware.
Intel Errata HSD131, HSM142, HSW131, and BDM48 report that "spurious
corrected errors may be logged in the IA32_MC0_STATUS register with
the valid field (bit 63) set, the uncorrected error field (bit 61) not
set, a Model Specific Error Code (bits [31:16]) of 0x000F, and an MCA
Error Code (bits [15:0]) of 0x0005." The Errata PDFs are linked in the
bugzilla below.
Block these spurious errors from the console and logs.
[ bp: Move the intel_filter_mce() header declarations into the already
existing CONFIG_X86_MCE_INTEL ifdeffery. ]
Co-developed-by: Alexander Krupp <centos@akr.yagii.de>
Signed-off-by: Alexander Krupp <centos@akr.yagii.de>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206587
Link: https://lkml.kernel.org/r/20200219131611.36816-1-prarit@redhat.com
|
|
.. in order to fix a -Wmissing-prototypes warning.
No functional change.
Signed-off-by: Benjamin Thiel <b.thiel@posteo.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: kvm@vger.kernel.org
Link: https://lkml.kernel.org/r/20200123172945.7235-1-b.thiel@posteo.de
|
|
.. in order to fix a -Wmissing-prototype warning.
No functional change.
Signed-off-by: Benjamin Thiel <b.thiel@posteo.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200123133051.5974-1-b.thiel@posteo.de
|
|
Switch to the generic VDSO clock mode storage.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> (VDSO parts)
Acked-by: Juergen Gross <jgross@suse.com> (Xen parts)
Acked-by: Paolo Bonzini <pbonzini@redhat.com> (KVM parts)
Link: https://lkml.kernel.org/r/20200207124403.152039903@linutronix.de
|
|
All architectures which use the generic VDSO code have their own storage
for the VDSO clock mode. That's pointless and just requires duplicate code.
X86 abuses the function which retrieves the architecture specific clock
mode storage to mark the clocksource as used in the VDSO. That's silly
because this is invoked on every tick when the VDSO data is updated.
Move this functionality to the clocksource::enable() callback so it gets
invoked once when the clocksource is installed. This allows to make the
clock mode storage generic.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com> (Hyper-V parts)
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> (VDSO parts)
Acked-by: Juergen Gross <jgross@suse.com> (Xen parts)
Link: https://lkml.kernel.org/r/20200207124402.934519777@linutronix.de
|
|
Fix a couple of typos in code comments.
[ bp: While at it: s/IRQ's/IRQs/. ]
Signed-off-by: Martin Molnar <martin.molnar.programming@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/0819a044-c360-44a4-f0b6-3f5bafe2d35c@gmail.com
|
|
rather than relying upon the magic in raw_copy_from_user()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Accessing the MCA thresholding controls in sysfs concurrently with CPU
hotplug can lead to a couple of KASAN-reported issues:
BUG: KASAN: use-after-free in sysfs_file_ops+0x155/0x180
Read of size 8 at addr ffff888367578940 by task grep/4019
and
BUG: KASAN: use-after-free in show_error_count+0x15c/0x180
Read of size 2 at addr ffff888368a05514 by task grep/4454
for example. Both result from the fact that the threshold block
creation/teardown code frees the descriptor memory itself instead of
defining proper ->release function and leaving it to the driver core to
take care of that, after all sysfs accesses have completed.
Do that and get rid of the custom freeing code, fixing the above UAFs in
the process.
[ bp: write commit message. ]
Fixes: 95268664390b ("[PATCH] x86_64: mce_amd support for family 0x10 processors")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200214082801.13836-1-bp@alien8.de
|
|
threshold_create_bank() creates a bank descriptor per MCA error
thresholding counter which can be controlled over sysfs. It publishes
the pointer to that bank in a per-CPU variable and then goes on to
create additional thresholding blocks if the bank has such.
However, that creation of additional blocks in
allocate_threshold_blocks() can fail, leading to a use-after-free
through the per-CPU pointer.
Therefore, publish that pointer only after all blocks have been setup
successfully.
Fixes: 019f34fccfd5 ("x86, MCE, AMD: Move shared bank to node descriptor")
Reported-by: Saar Amar <Saar.Amar@microsoft.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200128140846.phctkvx5btiexvbx@kili.mountain
|
|
An XSAVES component's alignment/offset is meaningful only when the
feature is enabled. Return zero and WARN_ONCE on checking alignment of
disabled features.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20200109211452.27369-4-yu-cheng.yu@intel.com
|
|
In setup_xstate_comp(), each XSAVES component offset starts from the
end of its preceding component plus alignment. A disabled feature does
not take space and its offset should be set to the end of its preceding
one with no alignment. However, in this case, alignment is incorrectly
added to the offset, which can cause the next component to have a wrong
offset.
This problem has not been visible because currently there is no xfeature
requiring alignment.
Fix it by tracking the next starting offset only from enabled
xfeatures. To make it clear, also change the function name to
setup_xstate_comp_offsets().
[ bp: Fix a typo in the comment above it, while at it. ]
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20200109211452.27369-3-yu-cheng.yu@intel.com
|
|
The IMA arch code attempts to inspect the "SetupMode" EFI variable
by populating a variable called efi_SetupMode_name with the string
"SecureBoot" and passing that to the EFI GetVariable service, which
obviously does not yield the expected result.
Given that the string is only referenced a single time, let's get
rid of the intermediate variable, and pass the correct string as
an immediate argument. While at it, do the same for "SecureBoot".
Fixes: 399574c64eaf ("x86/ima: retry detecting secure boot mode")
Fixes: 980ef4d22a95 ("x86/ima: check EFI SetupMode too")
Cc: Matthew Garrett <mjg59@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org # v5.3
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The function setup_xstate_features() uses CPUID to find each xfeature's
standard-format offset and size. Since XSAVES always uses the compacted
format, supervisor xstates are *NEVER* in the standard-format and their
offsets are left as -1's. However, they are still being tracked as
last_good_offset.
Fix it by tracking only user xstate offsets.
[ bp: Use xfeature_is_supervisor() and save an indentation level. Drop
now unused xfeature_is_user(). ]
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20200109211452.27369-2-yu-cheng.yu@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when
the TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused
an infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects
PCI devices with non-maskable MSI interrupts. The problem is caused
by the non-atomic writes of the MSI address (destination APIC id)
and data (vector) fields which the device uses to construct the MSI
message. The non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after
writing address and before writing data, then the MSI block
constructs a inconsistent message which causes interrupts to be
lost and subsequent malfunction of the device.
The fix is to redirect the interrupt to the new vector on the
current CPU first and then switch it over to the new target CPU.
This allows to observe an eventually raised interrupt in the
transitional stage (old CPU, new vector) to be observed in the APIC
IRR and retriggered on the new target CPU and the new vector.
The potential spurious interrupts caused by this are harmless and
can in the worst case expose a buggy driver (all handlers have to
be able to deal with spurious interrupts as they can and do happen
for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall
page which prevents resume hibernation on HYPERV guests. This
change got lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent
potentially stale IOAPIC remote IRR bits which cause stale
interrupt lines after resume"
* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Mask IOAPIC entries when disabling the local APIC
x86/hyperv: Suspend/resume the hypercall page for hibernation
x86/apic/msi: Plug non-maskable MSI affinity race
x86/boot: Handle malformed SRAT tables during early ACPI parsing
x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs file system parameter updates from Al Viro:
"Saner fs_parser.c guts and data structures. The system-wide registry
of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
the horror switch() in fs_parse() that would have to grow another case
every time something got added to that system-wide registry.
New syntax types can be added by filesystems easily now, and their
namespace is that of functions - not of system-wide enum members. IOW,
they can be shared or kept private and if some turn out to be widely
useful, we can make them common library helpers, etc., without having
to do anything whatsoever to fs_parse() itself.
And we already get that kind of requests - the thing that finally
pushed me into doing that was "oh, and let's add one for timeouts -
things like 15s or 2h". If some filesystem really wants that, let them
do it. Without somebody having to play gatekeeper for the variants
blessed by direct support in fs_parse(), TYVM.
Quite a bit of boilerplate is gone. And IMO the data structures make a
lot more sense now. -200LoC, while we are at it"
* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
tmpfs: switch to use of invalfc()
cgroup1: switch to use of errorfc() et.al.
procfs: switch to use of invalfc()
hugetlbfs: switch to use of invalfc()
cramfs: switch to use of errofc() et.al.
gfs2: switch to use of errorfc() et.al.
fuse: switch to use errorfc() et.al.
ceph: use errorfc() and friends instead of spelling the prefix out
prefix-handling analogues of errorf() and friends
turn fs_param_is_... into functions
fs_parse: handle optional arguments sanely
fs_parse: fold fs_parameter_desc/fs_parameter_spec
fs_parser: remove fs_parameter_description name field
add prefix to fs_context->log
ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
new primitive: __fs_parse()
switch rbd and libceph to p_log-based primitives
struct p_log, variants of warnf() et.al. taking that one instead
teach logfc() to handle prefices, give it saner calling conventions
get rid of cg_invalf()
...
|
|
The former contains nothing but a pointer to an array of the latter...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Unused now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When a system suspends, the local APIC is disabled in the suspend sequence,
but the IOAPIC is left in the current state. This means unmasked interrupt
lines stay unmasked. This is usually the case for IOAPIC pin 9 to which the
ACPI interrupt is connected.
That means that in suspended state the IOAPIC can respond to an external
interrupt, e.g. the wakeup via keyboard/RTC/ACPI, but the interrupt message
cannot be handled by the disabled local APIC. As a consequence the Remote
IRR bit is set, but the local APIC does not send an EOI to acknowledge
it. This causes the affected interrupt line to become stale and the stale
Remote IRR bit will cause a hang when __synchronize_hardirq() is invoked
for that interrupt line.
To prevent this, mask all IOAPIC entries before disabling the local
APIC. The resume code already has the unmask operation inside.
[ tglx: Massaged changelog ]
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1579076539-7267-1-git-send-email-TonyWWang-oc@zhaoxin.com
|
|
Pull more KVM updates from Paolo Bonzini:
"s390:
- fix register corruption
- ENOTSUPP/EOPNOTSUPP mixed
- reset cleanups/fixes
- selftests
x86:
- Bug fixes and cleanups
- AMD support for APIC virtualization even in combination with
in-kernel PIT or IOAPIC.
MIPS:
- Compilation fix.
Generic:
- Fix refcount overflow for zero page"
* tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration
KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit
x86: vmxfeatures: rename features for consistency with KVM and manual
KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses
KVM: x86: Fix perfctr WRMSR for running counters
x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests
x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()
kvm: mmu: Separate generating and setting mmio ptes
kvm: mmu: Replace unsigned with unsigned int for PTE access
KVM: nVMX: Remove stale comment from nested_vmx_load_cr3()
KVM: MIPS: Fold comparecount_func() into comparecount_wakeup()
KVM: MIPS: Fix a build error due to referencing not-yet-defined function
x86/kvm: do not setup pv tlb flush when not paravirtualized
KVM: fix overflow of zero page refcount with ksm running
KVM: x86: Take a u64 when checking for a valid dr7 value
KVM: x86: use raw clock values consistently
KVM: x86: reorganize pvclock_gtod_data members
KVM: nVMX: delete meaningless nested_vmx_run() declaration
KVM: SVM: allow AVIC without split irqchip
kvm: ioapic: Lazy update IOAPIC EOI
...
|
|
kvm_setup_pv_tlb_flush will waste memory and print a misguiding message
when KVM paravirtualization is not available.
Intel SDM says that the when cpuid is used with EAX higher than the
maximum supported value for basic of extended function, the data for the
highest supported basic function will be returned.
So, in some systems, kvm_arch_para_features will return bogus data,
causing kvm_setup_pv_tlb_flush to detect support for pv tlb flush.
Testing for kvm_para_available will work as it checks for the hypervisor
signature.
Besides, when the "nopv" command line parameter is used, it should not
continue as well, as kvm_guest_init will no be called in that case.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.
Conversion rule is:
llseek => proc_lseek
unlocked_ioctl => proc_ioctl
xxx => proc_xxx
delete ".owner = THIS_MODULE" line
[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Evan tracked down a subtle race between the update of the MSI message and
the device raising an interrupt internally on PCI devices which do not
support MSI masking. The update of the MSI message is non-atomic and
consists of either 2 or 3 sequential 32bit wide writes to the PCI config
space.
- Write address low 32bits
- Write address high 32bits (If supported by device)
- Write data
When an interrupt is migrated then both address and data might change, so
the kernel attempts to mask the MSI interrupt first. But for MSI masking is
optional, so there exist devices which do not provide it. That means that
if the device raises an interrupt internally between the writes then a MSI
message is sent built from half updated state.
On x86 this can lead to spurious interrupts on the wrong interrupt
vector when the affinity setting changes both address and data. As a
consequence the device interrupt can be lost causing the device to
become stuck or malfunctioning.
Evan tried to handle that by disabling MSI accross an MSI message
update. That's not feasible because disabling MSI has issues on its own:
If MSI is disabled the PCI device is routing an interrupt to the legacy
INTx mechanism. The INTx delivery can be disabled, but the disablement is
not working on all devices.
Some devices lose interrupts when both MSI and INTx delivery are disabled.
Another way to solve this would be to enforce the allocation of the same
vector on all CPUs in the system for this kind of screwed devices. That
could be done, but it would bring back the vector space exhaustion problems
which got solved a few years ago.
Fortunately the high address (if supported by the device) is only relevant
when X2APIC is enabled which implies interrupt remapping. In the interrupt
remapping case the affinity setting is happening at the interrupt remapping
unit and the PCI MSI message is programmed only once when the PCI device is
initialized.
That makes it possible to solve it with a two step update:
1) Target the MSI msg to the new vector on the current target CPU
2) Target the MSI msg to the new vector on the new target CPU
In both cases writing the MSI message is only changing a single 32bit word
which prevents the issue of inconsistency.
After writing the final destination it is necessary to check whether the
device issued an interrupt while the intermediate state #1 (new vector,
current CPU) was in effect.
This is possible because the affinity change is always happening on the
current target CPU. The code runs with interrupts disabled, so the
interrupt can be detected by checking the IRR of the local APIC. If the
vector is pending in the IRR then the interrupt is retriggered on the new
target CPU by sending an IPI for the associated vector on the target CPU.
This can cause spurious interrupts on both the local and the new target
CPU.
1) If the new vector is not in use on the local CPU and the device
affected by the affinity change raised an interrupt during the
transitional state (step #1 above) then interrupt entry code will
ignore that spurious interrupt. The vector is marked so that the
'No irq handler for vector' warning is supressed once.
2) If the new vector is in use already on the local CPU then the IRR check
might see an pending interrupt from the device which is using this
vector. The IPI to the new target CPU will then invoke the handler of
the device, which got the affinity change, even if that device did not
issue an interrupt
3) If the new vector is in use already on the local CPU and the device
affected by the affinity change raised an interrupt during the
transitional state (step #1 above) then the handler of the device which
uses that vector on the local CPU will be invoked.
expose issues in device driver interrupt handlers which are not prepared to
handle a spurious interrupt correctly. This not a regression, it's just
exposing something which was already broken as spurious interrupts can
happen for a lot of reasons and all driver handlers need to be able to deal
with them.
Reported-by: Evan Green <evgreen@chromium.org>
Debugged-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Evan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87imkr4s7n.fsf@nanos.tec.linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- three fixes and a cleanup for the resctrl code
- a HyperV fix
- a fix to /proc/kcore contents in live debugging sessions
- a fix for the x86 decoder opcode map"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/decoder: Add TEST opcode to Group3-2
x86/resctrl: Clean up unused function parameter in mkdir path
x86/resctrl: Fix a deadlock due to inaccurate reference
x86/resctrl: Fix use-after-free due to inaccurate refcount of rdtgroup
x86/resctrl: Fix use-after-free when deleting resource groups
x86/hyper-v: Add "polling" bit to hv_synic_sint
x86/crash: Define arch_crash_save_vmcoreinfo() if CONFIG_CRASH_CORE=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx
Pull x86 MPX removal from Dave Hansen:
"MPX requires recompiling applications, which requires compiler
support. Unfortunately, GCC 9.1 is expected to be be released without
support for MPX. This means that there was only a relatively small
window where folks could have ever used MPX. It failed to gain wide
adoption in the industry, and Linux was the only mainstream OS to ever
support it widely.
Support for the feature may also disappear on future processors.
This set completes the process that we started during the 5.4 merge
window when the MPX prctl()s were removed. XSAVE support is left in
place, which allows MPX-using KVM guests to continue to function"
* tag 'mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx:
x86/mpx: remove MPX from arch/x86
mm: remove arch_bprm_mm_init() hook
x86/mpx: remove bounds exception code
x86/mpx: remove build infrastructure
x86/alternatives: add missing insn.h include
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
tty: n_hdlc: Use flexible-array member and struct_size() helper
tty: baudrate: SPARC supports few more baud rates
tty: baudrate: Synchronise baud_table[] and baud_bits[]
tty: serial: meson_uart: Add support for kernel debugger
serial: imx: fix a race condition in receive path
serial: 8250_bcm2835aux: Document struct bcm2835aux_data
serial: 8250_bcm2835aux: Use generic remapping code
serial: 8250_bcm2835aux: Allocate uart_8250_port on stack
serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Fix line mismatch on driver unbind
serial_core: Remove unused member in uart_port
vt: Correct comment documenting do_take_over_console()
vt: Delete comment referencing non-existent unbind_con_driver()
arch/xtensa/setup: Drop dummy_con initialization
arch/x86/setup: Drop dummy_con initialization
arch/unicore32/setup: Drop dummy_con initialization
arch/sparc/setup: Drop dummy_con initialization
arch/sh/setup: Drop dummy_con initialization
arch/s390/setup: Drop dummy_con initialization
...
|
|
Tony reported a boot regression caused by the recent workaround for systems
which have a disabled (clock gate off) PIT.
On his machine the kernel fails to initialize the PIT because
apic_needs_pit() does not take into account whether the local APIC
interrupt delivery mode will actually allow to setup and use the local
APIC timer. This should be easy to reproduce with acpi=off on the
command line which also disables HPET.
Due to the way the PIT/HPET and APIC setup ordering works (APIC setup can
require working PIT/HPET) the information is not available at the point
where apic_needs_pit() makes this decision.
To address this, split out the interrupt mode selection from
apic_intr_mode_init(), invoke the selection before making the decision
whether PIT is required or not, and add the missing checks into
apic_needs_pit().
Fixes: c8c4076723da ("x86/timer: Skip PIT initialization on modern chipsets")
Reported-by: Anthony Buckley <tony.buckley000@gmail.com>
Tested-by: Anthony Buckley <tony.buckley000@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Daniel Drake <drake@endlessm.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206125
Link: https://lore.kernel.org/r/87sgk6tmk2.fsf@nanos.tec.linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mtrr updates from Ingo Molnar:
"Two changes: restrict /proc/mtrr to CAP_SYS_ADMIN, plus a cleanup"
* 'x86-mtrr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Require CAP_SYS_ADMIN for all access
x86/mtrr: Get rid of mtrr_seq_show() forward declaration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FPU updates from Ingo Molnar:
"Three changes: fix a race that can result in FPU corruption, plus two
cleanups"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Deactivate FPU state after failure during state load
x86/fpu/xstate: Make xfeature_is_supervisor()/xfeature_is_user() return bool
x86/fpu/xstate: Fix small issues
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu-features updates from Ingo Molnar:
"The biggest change in this cycle was a large series from Sean
Christopherson to clean up the handling of VMX features. This both
fixes bugs/inconsistencies and makes the code more coherent and
future-proof.
There are also two cleanups and a minor TSX syslog messages
enhancement"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/cpu: Remove redundant cpu_detect_cache_sizes() call
x86/cpu: Print "VMX disabled" error message iff KVM is enabled
KVM: VMX: Allow KVM_INTEL when building for Centaur and/or Zhaoxin CPUs
perf/x86: Provide stubs of KVM helpers for non-Intel CPUs
KVM: VMX: Use VMX_FEATURE_* flags to define VMCS control bits
KVM: VMX: Check for full VMX support when verifying CPU compatibility
KVM: VMX: Use VMX feature flag to query BIOS enabling
KVM: VMX: Drop initialization of IA32_FEAT_CTL MSR
x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured
x86/cpu: Set synthetic VMX cpufeatures during init_ia32_feat_ctl()
x86/cpu: Print VMX flags in /proc/cpuinfo using VMX_FEATURES_*
x86/cpu: Detect VMX features on Intel, Centaur and Zhaoxin CPUs
x86/vmx: Introduce VMX_FEATURES_*
x86/cpu: Clear VMX feature flag if VMX is not fully enabled
x86/zhaoxin: Use common IA32_FEAT_CTL MSR initialization
x86/centaur: Use common IA32_FEAT_CTL MSR initialization
x86/mce: WARN once if IA32_FEAT_CTL MSR is left unlocked
x86/intel: Initialize IA32_FEAT_CTL MSR at boot
tools/x86: Sync msr-index.h from kernel sources
selftests, kvm: Replace manual MSR defs with common msr-index.h
...
|
|
invariance
On some platforms such as the Dell XPS 13 laptop the firmware disables turbo
when the machine is disconnected from AC, and viceversa it enables it again
when it's reconnected. In these cases a _PPC ACPI notification is issued.
The scheduler needs to know freq_max for frequency-invariant calculations.
To account for turbo availability to come and go, record freq_max at boot as
if turbo was available and store it in a helper variable. Use a setter
function to swap between freq_base and freq_max every time turbo goes off or on.
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200122151617.531-7-ggherdovich@suse.cz
|
|
The scheduler needs the ratio freq_curr/freq_max for frequency-invariant
accounting. On all ATOM CPUs prior to Goldmont, set freq_max to the 1-core
turbo ratio.
We intended to perform tests validating that this patch doesn't regress in
terms of energy efficiency, given that this is the primary concern on Atom
processors. Alas, we found out that turbostat doesn't support reading RAPL
interfaces on our test machine (Airmont), and we don't have external equipment
to measure power consumption; all we have is the performance results of the
benchmarks we ran.
Test machine:
Platform : Dell Wyse 3040 Thin Client[1]
CPU Model : Intel Atom x5-Z8350 (aka Cherry Trail, aka Airmont)
Fam/Mod/Ste : 6:76:4
Topology : 1 socket, 4 cores / 4 threads
Memory : 2G
Storage : onboard flash, XFS filesystem
[1] https://www.dell.com/en-us/work/shop/wyse-endpoints-and-software/wyse-3040-thin-client/spd/wyse-3040-thin-client
Base frequency and available turbo levels (MHz):
Min Operating Freq 266 |***
Low Freq Mode 800 |********
Base Freq 2400 |************************
4 Cores 2800 |****************************
3 Cores 2800 |****************************
2 Cores 3200 |********************************
1 Core 3200 |********************************
Tested kernels:
Baseline : v5.4-rc1, intel_pstate passive, schedutil
Comparison #1 : v5.4-rc1, intel_pstate active , powersave
Comparison #2 : v5.4-rc1, this patch, intel_pstate passive, schedutil
tbench, hackbench and kernbench performed the same under all three kernels;
dbench ran faster with intel_pstate/powersave and the git unit tests were a
lot faster with intel_pstate/powersave and invariant schedutil wrt the
baseline. Not that any of this is terrbily interesting anyway, one doesn't buy
an Atom system to go fast. Power consumption regressions aren't expected but
we lack the equipment to make that measurement. Turbostat seems to think that
reading RAPL on this machine isn't a good idea and we're trusting that
decision.
comparison ratio of performance with baseline; 1.00 means neutral,
lower is better:
I_PSTATE FREQ-INV
----------------------------------------
dbench 0.90 ~
kernbench 0.98 0.97
gitsource 0.63 0.43
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200122151617.531-6-ggherdovich@suse.cz
|
|
The scheduler needs the ratio freq_curr/freq_max for frequency-invariant
accounting. On GOLDMONT (aka Apollo Lake), GOLDMONT_D (aka Denverton) and
GOLDMONT_PLUS CPUs (aka Gemini Lake) set freq_max to the highest frequency
reported by the CPU.
The encoding of turbo ratios for GOLDMONT* is identical to the one for
SKYLAKE_X, but we treat the Atom case apart because we want to set freq_max to
a higher value, thus the ratio freq_curr/freq_max to be lower, leading to more
conservative frequency selections (favoring power efficiency).
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200122151617.531-5-ggherdovich@suse.cz
|
|
The scheduler needs the ratio freq_curr/freq_max for frequency-invariant
accounting. On Xeon Phi CPUs set freq_max to the second-highest frequency
reported by the CPU.
Xeon Phi CPUs such as Knights Landing and Knights Mill typically have either
one or two turbo frequencies; in the former case that's 100 MHz above the base
frequency, in the latter case the two levels are 100 MHz and 200 MHz above
base frequency.
We set freq_max to the second-highest frequency reported by the CPU. This
could be the base frequency (if only one turbo level is available) or the first
turbo level (if two levels are available). The rationale is to compromise
between power efficiency or performance -- going straight to max turbo would
favor efficiency and blindly using base freq would favor performance.
For reference, this is how MSR_TURBO_RATIO_LIMIT must be parsed on a Xeon Phi
to get the available frequencies (taken from a comment in turbostat's sources):
[0] -- Reserved
[7:1] -- Base value of number of active cores of bucket 1.
[15:8] -- Base value of freq ratio of bucket 1.
[20:16] -- +ve delta of number of active cores of bucket 2.
i.e. active cores of bucket 2 =
active cores of bucket 1 + delta
[23:21] -- Negative delta of freq ratio of bucket 2.
i.e. freq ratio of bucket 2 =
freq ratio of bucket 1 - delta
[28:24]-- +ve delta of number of active cores of bucket 3.
[31:29]-- -ve delta of freq ratio of bucket 3.
[36:32]-- +ve delta of number of active cores of bucket 4.
[39:37]-- -ve delta of freq ratio of bucket 4.
[44:40]-- +ve delta of number of active cores of bucket 5.
[47:45]-- -ve delta of freq ratio of bucket 5.
[52:48]-- +ve delta of number of active cores of bucket 6.
[55:53]-- -ve delta of freq ratio of bucket 6.
[60:56]-- +ve delta of number of active cores of bucket 7.
[63:61]-- -ve delta of freq ratio of bucket 7.
1. PERFORMANCE EVALUATION: TBENCH +5%
2. NEUTRAL BENCHMARKS (ALL OTHERS)
3. TEST SETUP
1. PERFORMANCE EVALUATION: TBENCH +5%
-------------------------------------
A performance evaluation was conducted on a Knights Mill machine (see "Test
Setup" below), were the frequency-invariance patch (on schedutil) is compared
to both non-invariant schedutil and active intel_pstate with powersave: all
three tested kernels behave the same performance-wise and with regard to power
consumption (performance per watt). The only notable difference is tbench:
comparison ratio of performance with baseline; 1.00 means neutral,
higher is better:
I_PSTATE FREQ-INV
----------------------------------------
tbench 1.04 1.05
performance-per-watt ratios with baseline; 1.00 means neutral, higher is better:
I_PSTATE FREQ-INV
----------------------------------------
tbench 1.03 1.04
which essentially means that frequency-invariant schedutil is 5% better than
baseline, the same as intel_pstate+powersave.
As the results above are averaged over the varying parameter, here the detailed
table.
Varying parameter : number of clients
Unit : MB/sec (higher is better)
5.2.0 vanilla (BASELINE) 5.2.0 intel_pstate 5.2.0 freq-inv
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hmean 1 49.06 +- 2.12% ( ) 51.66 +- 1.52% ( 5.30%) 52.87 +- 0.88% ( 7.76%)
Hmean 2 93.82 +- 0.45% ( ) 103.24 +- 0.70% ( 10.05%) 105.90 +- 0.70% ( 12.88%)
Hmean 4 192.46 +- 1.15% ( ) 215.95 +- 0.60% ( 12.21%) 215.78 +- 1.43% ( 12.12%)
Hmean 8 406.74 +- 2.58% ( ) 438.58 +- 0.36% ( 7.83%) 437.61 +- 0.97% ( 7.59%)
Hmean 16 857.70 +- 1.22% ( ) 890.26 +- 0.72% ( 3.80%) 889.11 +- 0.73% ( 3.66%)
Hmean 32 1760.10 +- 0.92% ( ) 1791.70 +- 0.44% ( 1.79%) 1787.95 +- 0.44% ( 1.58%)
Hmean 64 3183.50 +- 0.34% ( ) 3183.19 +- 0.36% ( -0.01%) 3187.53 +- 0.36% ( 0.13%)
Hmean 128 4830.96 +- 0.31% ( ) 4846.53 +- 0.30% ( 0.32%) 4855.86 +- 0.30% ( 0.52%)
Hmean 256 5467.98 +- 0.38% ( ) 5793.80 +- 0.28% ( 5.96%) 5821.94 +- 0.17% ( 6.47%)
Hmean 512 5398.10 +- 0.06% ( ) 5745.56 +- 0.08% ( 6.44%) 5503.68 +- 0.07% ( 1.96%)
Hmean 1024 5290.43 +- 0.63% ( ) 5221.07 +- 0.47% ( -1.31%) 5277.22 +- 0.80% ( -0.25%)
Hmean 1088 5139.71 +- 0.57% ( ) 5236.02 +- 0.71% ( 1.87%) 5190.57 +- 0.41% ( 0.99%)
2. NEUTRAL BENCHMARKS (ALL OTHERS)
----------------------------------
* pgbench (both read/write and read-only)
* NASA Parallel Benchmarks (NPB), MPI or OpenMP for message-passing
* hackbench
* netperf
* dbench
* kernbench
* gitsource (git unit test suite)
3. TEST SETUP
-------------
Test machine:
CPU Model : Intel Xeon Phi CPU 7255 @ 1.10GHz (a.k.a. Knights Mill)
Fam/Mod/Ste : 6:133:0
Topology : 1 socket, 68 cores / 272 threads
Memory : 96G
Storage : rotary, XFS filesystem
Max EFFICiency, BASE frequency and available turbo levels (MHz):
EFFIC 1000 |**********
BASE 1100 |***********
68C 1100 |***********
30C 1200 |************
Tested kernels:
Baseline : v5.2, intel_pstate passive, schedutil
Comparison #1 : v5.2, intel_pstate active , powersave
Comparison #2 : v5.2, this patch, intel_pstate passive, schedutil
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200122151617.531-4-ggherdovich@suse.cz
|
|
The scheduler needs the ratio freq_curr/freq_max for frequency-invariant
accounting. On SKYLAKE_X CPUs set freq_max to the highest frequency that can
be sustained by a group of at least 4 cores.
From the changelog of commit 31e07522be56 ("tools/power turbostat: fix
decoding for GLM, DNV, SKX turbo-ratio limits"):
> Newer processors do not hard-code the the number of cpus in each bin
> to {1, 2, 3, 4, 5, 6, 7, 8} Rather, they can specify any number
> of CPUS in each of the 8 bins:
>
> eg.
>
> ...
> 37 * 100.0 = 3600.0 MHz max turbo 4 active cores
> 38 * 100.0 = 3700.0 MHz max turbo 3 active cores
> 39 * 100.0 = 3800.0 MHz max turbo 2 active cores
> 39 * 100.0 = 3900.0 MHz max turbo 1 active cores
>
> could now look something like this:
>
> ...
> 37 * 100.0 = 3600.0 MHz max turbo 16 active cores
> 38 * 100.0 = 3700.0 MHz max turbo 8 active cores
> 39 * 100.0 = 3800.0 MHz max turbo 4 active cores
> 39 * 100.0 = 3900.0 MHz max turbo 2 active cores
This encoding of turbo levels applies to both SKYLAKE_X and GOLDMONT/GOLDMONT_D,
but we treat these two classes in separate commits because their freq_max
values need to be different. For SKX we prefer a lower freq_max in the ratio
freq_curr/freq_max, allowing load and utilization to overshoot and the
schedutil governor to be more performance-oriented. Models from the Atom
series (such as GOLDMONT*) are handled in a forthcoming commit as they have to
favor power-efficiency over performance.
Results from a performance evaluation follow.
1. TEST SETUP
2. NEUTRAL BENCHMARKS
3. NON-NEUTRAL BENCHMARKS
4. DETAILED TABLES
1. TEST SETUP
-------------
Test machine:
CPU Model : Intel Xeon Platinum 8260L CPU @ 2.40GHz (a.k.a. Cascade Lake)
Fam/Mod/Ste : 6:85:6
Topology : 2 sockets, 24 cores / 48 threads each socket
Memory : 192G
Storage : SSD, XFS filesystem
Max EFFICiency, BASE frequency and available turbo levels (MHz):
EFFIC 1000 |**********
BASE 2400 |************************
24C 3100 |*******************************
20C 3300 |*********************************
16C 3600 |************************************
12C 3600 |************************************
8C 3600 |************************************
4C 3700 |*************************************
2C 3900 |***************************************
Tested kernels:
Baseline : v5.2, intel_pstate passive, schedutil
Comparison #1 : v5.2, intel_pstate active , powersave+HWP
Comparison #2 : v5.2, this patch, intel_pstate passive, schedutil
2. NEUTRAL BENCHMARKS
---------------------
* pgbench read/write
* NASA Parallel Benchmarks (NPB), MPI or OpenMP for message-passing
* hackbench
* netperf
3. NON-NEUTRAL BENCHMARKS
-------------------------
comparison ratio with baseline; 1.00 means neutral, higher is better:
I_PSTATE FREQ-INV
----------------------------------------
pgbench read-only 1.10 ~
tbench 1.82 1.14
comparison ratio with baseline; 1.00 means neutral, lower is better:
I_PSTATE FREQ-INV
----------------------------------------
dbench ~ 0.97
kernbench 0.88 0.78
gitsource[*] ~ 0.46
[*] "gitsource" consists in running git's unit tests
tilde (~) means 1.00, ie result identical to baseline
Performance per watt:
performance-per-watt ratios with baseline; 1.00 means neutral, higher is better:
I_PSTATE FREQ-INV
----------------------------------------
dbench 0.92 0.91
tbench 1.26 1.04
kernbench 0.95 0.96
gitsource 1.03 1.30
Similarly to earlier Xeons, measurable performance gains over non-invariant
schedutil are observed on dbench, tbench, kernel compilation and running the
git unit tests suite. Looking at the detailed tables show that the patch
scores the largest difference when the machine is lightly loaded. Power
efficiency suffers lightly on kernbench and a bit more on dbench, but largely
improves on gitsource (which also runs considerably faster). For reference, we
also report results using active intel_pstate with powersave and HWP; the
largest gap between non-invariant schedutil and intel_pstate+powersave is
still tbench, which runs 82% better and with 26% improved efficiency on the
latter configuration -- this divide isn't closed yet by frequency-invariant
schedutil.
4. DETAILED TABLES
------------------
Benchmark : tbench4 (i.e. dbench4 over the network, actually loopback)
Varying parameter : number of clients
Unit : MB/sec (higher is better)
5.2.0 vanilla (BASELINE) 5.2.0 intel_pstate/HWP 5.2.0 freq-inv
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hmean 1 183.56 +- 0.21% ( ) 516.12 +- 0.57% ( 181.18%) 185.59 +- 0.59% ( 1.11%)
Hmean 2 365.75 +- 0.25% ( ) 1015.14 +- 0.33% ( 177.55%) 402.59 +- 4.48% ( 10.07%)
Hmean 4 720.99 +- 0.44% ( ) 1951.75 +- 0.28% ( 170.70%) 738.39 +- 1.72% ( 2.41%)
Hmean 8 1449.93 +- 0.34% ( ) 3830.56 +- 0.24% ( 164.19%) 1750.36 +- 4.65% ( 20.72%)
Hmean 16 2874.26 +- 0.57% ( ) 7381.62 +- 0.53% ( 156.82%) 4348.35 +- 2.22% ( 51.29%)
Hmean 32 6116.17 +- 5.10% ( ) 13013.05 +- 0.08% ( 112.76%) 8980.35 +- 0.66% ( 46.83%)
Hmean 64 14485.04 +- 3.46% ( ) 17835.12 +- 0.35% ( 23.13%) 16540.73 +- 0.51% ( 14.19%)
Hmean 128 30779.16 +- 3.20% ( ) 32796.94 +- 2.13% ( 6.56%) 31512.58 +- 0.20% ( 2.38%)
Hmean 256 34664.66 +- 0.81% ( ) 34604.67 +- 0.46% ( -0.17%) 34943.70 +- 0.25% ( 0.80%)
Hmean 384 33957.51 +- 0.11% ( ) 34091.50 +- 0.14% ( 0.39%) 33921.41 +- 0.09% ( -0.11%)
Benchmark : kernbench (kernel compilation)
Varying parameter : number of jobs
Unit : seconds (lower is better)
5.2.0 vanilla (BASELINE) 5.2.0 intel_pstate/HWP 5.2.0 freq-inv
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 2 332.94 +- 0.40% ( ) 260.16 +- 0.45% ( 21.86%) 233.56 +- 0.21% ( 29.85%)
Amean 4 173.04 +- 0.43% ( ) 138.76 +- 0.03% ( 19.81%) 123.59 +- 0.11% ( 28.58%)
Amean 8 89.65 +- 0.20% ( ) 73.54 +- 0.09% ( 17.97%) 65.69 +- 0.10% ( 26.72%)
Amean 16 48.08 +- 1.41% ( ) 41.64 +- 1.61% ( 13.40%) 36.00 +- 1.80% ( 25.11%)
Amean 32 28.78 +- 0.72% ( ) 26.61 +- 1.99% ( 7.55%) 23.19 +- 1.68% ( 19.43%)
Amean 64 20.46 +- 1.85% ( ) 19.76 +- 0.35% ( 3.42%) 17.38 +- 0.92% ( 15.06%)
Amean 128 18.69 +- 1.70% ( ) 17.59 +- 1.04% ( 5.90%) 15.73 +- 1.40% ( 15.85%)
Amean 192 18.82 +- 1.01% ( ) 17.76 +- 0.77% ( 5.67%) 15.57 +- 1.80% ( 17.28%)
Benchmark : gitsource (time to run the git unit test suite)
Varying parameter : none
Unit : seconds (lower is better)
5.2.0 vanilla (BASELINE) 5.2.0 intel_pstate/HWP 5.2.0 freq-inv
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 792.49 +- 0.20% ( ) 779.35 +- 0.24% ( 1.66%) 427.14 +- 0.16% ( 46.10%)
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200122151617.531-3-ggherdovich@suse.cz
|
