summaryrefslogtreecommitdiff
path: root/arch/x86/kernel
AgeCommit message (Collapse)AuthorFilesLines
2017-06-11Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+1
Pull KVM fixes from Paolo Bonzini: "Bug fixes (ARM, s390, x86)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: async_pf: avoid async pf injection when in guest mode KVM: cpuid: Fix read/write out-of-bounds vulnerability in cpuid emulation arm: KVM: Allow unaligned accesses at HYP arm64: KVM: Allow unaligned accesses at EL2 arm64: KVM: Preserve RES1 bits in SCTLR_EL2 KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages KVM: nVMX: Fix exception injection kvm: async_pf: fix rcu_irq_enter() with irqs enabled KVM: arm/arm64: vgic-v3: Fix nr_pre_bits bitfield extraction KVM: s390: fix ais handling vs cpu model KVM: arm/arm64: Fix isues with GICv2 on GICv3 migration
2017-06-08x86/microcode/intel: Clear patch pointer before jettisoning the initrdDominik Brodowski1-0/+3
During early boot, load_ucode_intel_ap() uses __load_ucode_intel() to obtain a pointer to the relevant microcode patch (embedded in the initrd), and stores this value in 'intel_ucode_patch' to speed up the microcode patch application for subsequent CPUs. On resuming from suspend-to-RAM, however, load_ucode_ap() calls load_ucode_intel_ap() for each non-boot-CPU. By then the initramfs is long gone so the pointer stored in 'intel_ucode_patch' no longer points to a valid microcode patch. Clear that pointer so that we effectively fall back to the CPU hotplug notifier callbacks to update the microcode. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> [ Edit and massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # 4.10.. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170607095819.9754-1-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-06kvm: async_pf: fix rcu_irq_enter() with irqs enabledPaolo Bonzini1-1/+1
native_safe_halt enables interrupts, and you just shouldn't call rcu_irq_enter() with interrupts enabled. Reorder the call with the following local_irq_disable() to respect the invariant. Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-06-05x86/cpu/cyrix: Add alternative Device ID of Geode GX1 SoCChristian Sünkenberg1-0/+1
A SoC variant of Geode GX1, notably NSC branded SC1100, seems to report an inverted Device ID in its DIR0 configuration register, specifically 0xb instead of the expected 0x4. Catch this presumably quirky version so it's properly recognized as GX1 and has its cache switched to write-back mode, which provides a significant performance boost in most workloads. SC1100's datasheet "Geode™ SC1100 Information Appliance On a Chip", states in section 1.1.7.1 "Device ID" that device identification values are specified in SC1100's device errata. These, however, seem to not have been publicly released. Wading through a number of boot logs and /proc/cpuinfo dumps found on pastebin and blogs, this patch should mostly be relevant for a number of now admittedly aging Soekris NET4801 and PC Engines WRAP devices, the latter being the platform this issue was discovered on. Performance impact was verified using "openssl speed", with write-back caching scaling throughput between -3% and +41%. Signed-off-by: Christian Sünkenberg <christian.suenkenberg@student.kit.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1496596719.26725.14.camel@student.kit.edu Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-29x86/debug/32: Convert a smp_processor_id() call to raw to avoid ↵Borislav Petkov1-1/+1
DEBUG_PREEMPT warning ... to raw_smp_processor_id() to not trip the BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 check. The reasoning behind it is that __warn() already uses the raw_ variants but the show_regs() path on 32-bit doesn't. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170528092212.fiod7kygpjm23m3o@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-29x86/microcode/AMD: Change load_microcode_amd()'s param to bool to fix ↵Borislav Petkov1-8/+8
preemptibility bug With CONFIG_DEBUG_PREEMPT enabled, I get: BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 caller is debug_smp_processor_id CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc2+ #2 Call Trace: dump_stack check_preemption_disabled debug_smp_processor_id save_microcode_in_initrd_amd ? microcode_init save_microcode_in_initrd ... because, well, it says it above, we're using smp_processor_id() in preemptible code. But passing the CPU number is not really needed. It is only used to determine whether we're on the BSP, and, if so, to save the microcode patch for early loading. [ We don't absolutely need to do it on the BSP but we do that customarily there. ] Instead, convert that function parameter to a boolean which denotes whether the patch should be saved or not, thereby avoiding the use of smp_processor_id() in preemptible code. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170528200414.31305-1-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds3-13/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A series of fixes for X86: - The final fix for the end-of-stack issue in the unwinder - Handle non PAT systems gracefully - Prevent access to uninitiliazed memory - Move early delay calaibration after basic init - Fix Kconfig help text - Fix a cross compile issue - Unbreak older make versions" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/timers: Move simple_udelay_calibration past init_hypervisor_platform x86/alternatives: Prevent uninitialized stack byte read in apply_alternatives() x86/PAT: Fix Xorg regression on CPUs that don't support PAT x86/watchdog: Fix Kconfig help text file path reference to lockup watchdog documentation x86/build: Permit building with old make versions x86/unwind: Add end-of-stack check for ftrace handlers Revert "x86/entry: Fix the end of the stack for newly forked tasks" x86/boot: Use CROSS_COMPILE prefix for readelf
2017-05-27Merge branch 'ras-urgent-for-linus' of ↵Linus Torvalds1-7/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fixes from Thomas Gleixner: "Two fixlets for RAS: - Export memory_error() so the NFIT module can utilize it - Handle memory errors in NFIT correctly" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: acpi, nfit: Fix the memory error check in nfit_handle_mce() x86/MCE: Export memory_error()
2017-05-27x86/ftrace: Make sure that ftrace trampolines are not RWXThomas Gleixner1-6/+14
ftrace use module_alloc() to allocate trampoline pages. The mapping of module_alloc() is RWX, which makes sense as the memory is written to right after allocation. But nothing makes these pages RO after writing to them. Add proper set_memory_rw/ro() calls to protect the trampolines after modification. Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705251056410.1862@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-05-27kprobes/x86: Fix to set RWX bits correctly before releasing trampolineMasami Hiramatsu1-0/+9
Fix kprobes to set(recover) RWX bits correctly on trampoline buffer before releasing it. Releasing readonly page to module_memfree() crash the kernel. Without this fix, if kprobes user register a bunch of kprobes in function body (since kprobes on function entry usually use ftrace) and unregister it, kernel hits a BUG and crash. Link: http://lkml.kernel.org/r/149570868652.3518.14120169373590420503.stgit@devbox Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Fixes: d0381c81c2f7 ("kprobes/x86: Set kprobes pages read-only") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-05-26x86/timers: Move simple_udelay_calibration past init_hypervisor_platformJan Kiszka1-2/+2
This ensures that adjustments to x86_platform done by the hypervisor setup is already respected by this simple calibration. The current user of this, introduced by 1b5aeebf3a92 ("x86/earlyprintk: Add support for earlyprintk via USB3 debug port"), comes much later into play. Fixes: dd759d93f4dd ("x86/timers: Add simple udelay calibration") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: http://lkml.kernel.org/r/5e89fe60-aab3-2c1c-aba8-32f8ad376189@siemens.com
2017-05-24x86/alternatives: Prevent uninitialized stack byte read in apply_alternatives()Mateusz Jurczyk1-2/+7
In the current form of the code, if a->replacementlen is 0, the reference to *insnbuf for comparison touches potentially garbage memory. While it doesn't affect the execution flow due to the subsequent a->replacementlen comparison, it is (rightly) detected as use of uninitialized memory by a runtime instrumentation currently under my development, and could be detected as such by other tools in the future, too (e.g. KMSAN). Fix the "false-positive" by reordering the conditions to first check the replacement instruction length before referencing specific opcode bytes. Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Link: http://lkml.kernel.org/r/20170524135500.27223-1-mjurczyk@google.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-24x86/unwind: Add end-of-stack check for ftrace handlersJosh Poimboeuf1-9/+40
Dave Jones and Steven Rostedt reported unwinder warnings like the following: WARNING: kernel stack frame pointer at ffff8800bda0ff30 in sshd:1090 has bad value 000055b32abf1fa8 In both cases, the unwinder was attempting to unwind from an ftrace handler into entry code. The callchain was something like: syscall entry code C function ftrace handler save_stack_trace() The problem is that the unwinder's end-of-stack logic gets confused by the way ftrace lays out the stack frame (with fentry enabled). I was able to recreate this warning with: echo call_usermodehelper_exec_async:stacktrace > /sys/kernel/debug/tracing/set_ftrace_filter (exit login session) I considered fixing this by changing the ftrace code to rewrite the stack to make the unwinder happy. But that seemed too intrusive after I implemented it. Instead, just add another check to the unwinder's end-of-stack logic to detect this special case. Side note: We could probably get rid of these end-of-stack checks by encoding the frame pointer for syscall entry just like we do for interrupt entry. That would be simpler, but it would also be a lot more intrusive since it would slightly affect the performance of every syscall. Reported-by: Dave Jones <davej@codemonkey.org.uk> Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: live-patching@vger.kernel.org Fixes: c32c47c68a0a ("x86/unwind: Warn on bad frame pointer") Link: http://lkml.kernel.org/r/671ba22fbc0156b8f7e0cfa5ab2a795e08bc37e1.1495553739.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-21x86/MCE: Export memory_error()Borislav Petkov1-7/+6
Export the function which checks whether an MCE is a memory error to other users so that we can reuse the logic. Drop the boot_cpu_data use, while at it, as mce.cpuvendor already has the CPU vendor in there. Integrate a piece from a patch from Vishal Verma <vishal.l.verma@intel.com> to export it for modules (nfit). The main reason we're exporting it is that the nfit handler nfit_handle_mce() needs to detect a memory error properly before doing its recovery actions. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20170519093915.15413-2-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-15KVM: x86: Fix load damaged SSEx MXCSR registerWanpeng Li1-0/+1
Reported by syzkaller: BUG: unable to handle kernel paging request at ffffffffc07f6a2e IP: report_bug+0x94/0x120 PGD 348e12067 P4D 348e12067 PUD 348e14067 PMD 3cbd84067 PTE 80000003f7e87161 Oops: 0003 [#1] SMP CPU: 2 PID: 7091 Comm: kvm_load_guest_ Tainted: G OE 4.11.0+ #8 task: ffff92fdfb525400 task.stack: ffffbda6c3d04000 RIP: 0010:report_bug+0x94/0x120 RSP: 0018:ffffbda6c3d07b20 EFLAGS: 00010202 do_trap+0x156/0x170 do_error_trap+0xa3/0x170 ? kvm_load_guest_fpu.part.175+0x12a/0x170 [kvm] ? mark_held_locks+0x79/0xa0 ? retint_kernel+0x10/0x10 ? trace_hardirqs_off_thunk+0x1a/0x1c do_invalid_op+0x20/0x30 invalid_op+0x1e/0x30 RIP: 0010:kvm_load_guest_fpu.part.175+0x12a/0x170 [kvm] ? kvm_load_guest_fpu.part.175+0x1c/0x170 [kvm] kvm_arch_vcpu_ioctl_run+0xed6/0x1b70 [kvm] kvm_vcpu_ioctl+0x384/0x780 [kvm] ? kvm_vcpu_ioctl+0x384/0x780 [kvm] ? sched_clock+0x13/0x20 ? __do_page_fault+0x2a0/0x550 do_vfs_ioctl+0xa4/0x700 ? up_read+0x1f/0x40 ? __do_page_fault+0x2a0/0x550 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc2 SDM mentioned that "The MXCSR has several reserved bits, and attempting to write a 1 to any of these bits will cause a general-protection exception(#GP) to be generated". The syzkaller forks' testcase overrides xsave area w/ random values and steps on the reserved bits of MXCSR register. The damaged MXCSR register values of guest will be restored to SSEx MXCSR register before vmentry. This patch fixes it by catching userspace override MXCSR register reserved bits w/ random values and bails out immediately. Reported-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-05-13Tigran has movedAndrew Morton3-3/+3
Cc: Tigran Aivazian <aivazian.tigran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds4-8/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - two boot crash fixes - unwinder fixes - kexec related kernel direct mappings enhancements/fixes - more Clang support quirks - minor cleanups - Documentation fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Fix a typo in Documentation x86/build: Don't add -maccumulate-outgoing-args w/o compiler support x86/boot/32: Fix UP boot on Quark and possibly other platforms x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init() x86/kexec/64: Use gbpages for identity mappings if available x86/mm: Add support for gbpages to kernel_ident_mapping_init() x86/boot: Declare error() as noreturn x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility x86/mm: Fix boot crash caused by incorrect loop count calculation in sync_global_pgds() x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic() x86/microcode/AMD: Remove redundant NULL check on mc
2017-05-12Merge tag 'for-linus-4.12b-rc0c-tag' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains two fixes for booting under Xen introduced during this merge window and two fixes for older problems, where one is just much more probable due to another merge window change" * tag 'for-linus-4.12b-rc0c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: adjust early dom0 p2m handling to xen hypervisor behavior x86/amd: don't set X86_BUG_SYSRET_SS_ATTRS when running under Xen xen/x86: Do not call xen_init_time_ops() until shared_info is initialized x86/xen: fix xsave capability setting
2017-05-11x86/amd: don't set X86_BUG_SYSRET_SS_ATTRS when running under XenJuergen Gross1-2/+3
When running as Xen pv guest X86_BUG_SYSRET_SS_ATTRS must not be set on AMD cpus. This bug/feature bit is kind of special as it will be used very early when switching threads. Setting the bit and clearing it a little bit later leaves a critical window where things can go wrong. This time window has enlarged a little bit by using setup_clear_cpu_cap() instead of the hypervisor's set_cpu_features callback. It seems this larger window now makes it rather easy to hit the problem. The proper solution is to never set the bit in case of Xen. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-11Merge tag 'rtc-4.12' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC subsystem update: - Add OF device ID table for i2c drivers New RTC driver: - Motorola CPCAP PMIC RTC RTC driver updates: - cmos: fix IRQ selection - ds1307: Add ST m41t0 support - ds1374: fix watchdog configuration - sh: Add rza series support" * tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits) rtc: gemini: add return value validation rtc: snvs: fix an incorrect check of return value rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks rtc: sh: mark PM functions as unused rtc: hid-sensor-time: remove some dead code rtc: m41t80: Add proper compatible for rv4162 rtc: ds1307: Add m41t0 to OF device ID table rtc: ds1307: support m41t0 variant rtc: cpcap: fix improper use of IRQ_NONE for request_threaded_irq rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs x86: i8259: export legacy_pic symbol dt-bindings: rtc: document the rtc-sh bindings rtc: sh: add support for rza series rtc: cpcap: kfreeing devm allocated memory rtc: wm8350: Remove unused to_wm8350_from_rtc_dev rtc: cpcap: new rtc driver dt-bindings: Add vendor prefix for Motorola rtc: omap: mark PM methods as __maybe_unused rtc: omap: remove incorrect __exit markups ...
2017-05-10Merge tag 'iommu-updates-v4.12' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - code optimizations for the Intel VT-d driver - ability to switch off a previously enabled Intel IOMMU - support for 'struct iommu_device' for OMAP, Rockchip and Mediatek IOMMUs - header optimizations for IOMMU core code headers and a few fixes that became necessary in other parts of the kernel because of that - ACPI/IORT updates and fixes - Exynos IOMMU optimizations - updates for the IOMMU dma-api code to bring it closer to use per-cpu iova caches - new command-line option to set default domain type allocated by the iommu core code - another command line option to allow the Intel IOMMU switched off in a tboot environment - ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an IDENTITY domain in conjunction with DMA ops, Support for SMR masking, Support for 16-bit ASIDs (was previously broken) - various other small fixes and improvements * tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits) soc/qbman: Move dma-mapping.h include to qman_priv.h soc/qbman: Fix implicit header dependency now causing build fails iommu: Remove trace-events include from iommu.h iommu: Remove pci.h include from trace/events/iommu.h arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops() ACPI/IORT: Fix CONFIG_IOMMU_API dependency iommu/vt-d: Don't print the failure message when booting non-kdump kernel iommu: Move report_iommu_fault() to iommu.c iommu: Include device.h in iommu.h x86, iommu/vt-d: Add an option to disable Intel IOMMU force on iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed iommu/arm-smmu: Correct sid to mask iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid() iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code omap3isp: Remove iommu_group related code iommu/omap: Add iommu-group support iommu/omap: Make use of 'struct iommu_device' iommu/omap: Store iommu_dev pointer in arch_data iommu/omap: Move data structures to omap-iommu.h iommu/omap: Drop legacy-style device support ...
2017-05-09x86/boot/32: Fix UP boot on Quark and possibly other platformsAndy Lutomirski2-5/+20
This partially reverts commit: 23b2a4ddebdd17f ("x86/boot/32: Defer resyncing initial_page_table until per-cpu is set up") That commit had one definite bug and one potential bug. The definite bug is that setup_per_cpu_areas() uses a differnet generic implementation on UP kernels, so initial_page_table never got resynced. This was fine for access to percpu data (it's in the identity map on UP), but it breaks other users of initial_page_table. The potential bug is that helpers like efi_init() would be called before the tables were synced. Avoid both problems by just syncing the page tables in setup_arch() *and* setup_per_cpu_areas(). Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds9-6/+9
Merge more updates from Andrew Morton: - the rest of MM - various misc things - procfs updates - lib/ updates - checkpatch updates - kdump/kexec updates - add kvmalloc helpers, use them - time helper updates for Y2038 issues. We're almost ready to remove current_fs_time() but that awaits a btrfs merge. - add tracepoints to DAX * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits) drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4 selftests/vm: add a test for virtual address range mapping dax: add tracepoint to dax_insert_mapping() dax: add tracepoint to dax_writeback_one() dax: add tracepoints to dax_writeback_mapping_range() dax: add tracepoints to dax_load_hole() dax: add tracepoints to dax_pfn_mkwrite() dax: add tracepoints to dax_iomap_pte_fault() mtd: nand: nandsim: convert to memalloc_noreclaim_*() treewide: convert PF_MEMALLOC manipulations to new helpers mm: introduce memalloc_noreclaim_{save,restore} mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required mm/huge_memory.c: use zap_deposited_table() more time: delete CURRENT_TIME_SEC and CURRENT_TIME gfs2: replace CURRENT_TIME with current_time apparmorfs: replace CURRENT_TIME with current_time() lustre: replace CURRENT_TIME macro fs: ubifs: replace CURRENT_TIME_SEC with current_time fs: ufs: use ktime_get_real_ts64() for birthtime ...
2017-05-09treewide: decouple cacheflush.h and set_memory.hLaura Abbott2-0/+2
Now that all call sites, completely decouple cacheflush.h and set_memory.h [sfr@canb.auug.org.au: kprobes/x86: merge fix for set_memory.h decoupling] Link: http://lkml.kernel.org/r/20170418180903.10300fd3@canb.auug.org.au Link: http://lkml.kernel.org/r/1488920133-27229-17-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-09x86: use set_memory.h headerLaura Abbott6-5/+6
set_memory_* functions have moved to set_memory.h. Switch to this explicitly. Link: http://lkml.kernel.org/r/1488920133-27229-6-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-09mm, vmalloc: use __GFP_HIGHMEM implicitlyMichal Hocko1-1/+1
__vmalloc* allows users to provide gfp flags for the underlying allocation. This API is quite popular $ git grep "=[[:space:]]__vmalloc\|return[[:space:]]*__vmalloc" | wc -l 77 The only problem is that many people are not aware that they really want to give __GFP_HIGHMEM along with other flags because there is really no reason to consume precious lowmemory on CONFIG_HIGHMEM systems for pages which are mapped to the kernel vmalloc space. About half of users don't use this flag, though. This signals that we make the API unnecessarily too complex. This patch simply uses __GFP_HIGHMEM implicitly when allocating pages to be mapped to the vmalloc space. Current users which add __GFP_HIGHMEM are simplified and drop the flag. Link: http://lkml.kernel.org/r/20170307141020.29107-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Cristopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-2/+2
Pull KVM updates from Paolo Bonzini: "ARM: - HYP mode stub supports kexec/kdump on 32-bit - improved PMU support - virtual interrupt controller performance improvements - support for userspace virtual interrupt controller (slower, but necessary for KVM on the weird Broadcom SoCs used by the Raspberry Pi 3) MIPS: - basic support for hardware virtualization (ImgTec P5600/P6600/I6400 and Cavium Octeon III) PPC: - in-kernel acceleration for VFIO s390: - support for guests without storage keys - adapter interruption suppression x86: - usual range of nVMX improvements, notably nested EPT support for accessed and dirty bits - emulation of CPL3 CPUID faulting generic: - first part of VCPU thread request API - kvm_stat improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits) kvm: nVMX: Don't validate disabled secondary controls KVM: put back #ifndef CONFIG_S390 around kvm_vcpu_kick Revert "KVM: Support vCPU-based gfn->hva cache" tools/kvm: fix top level makefile KVM: x86: don't hold kvm->lock in KVM_SET_GSI_ROUTING KVM: Documentation: remove VM mmap documentation kvm: nVMX: Remove superfluous VMX instruction fault checks KVM: x86: fix emulation of RSM and IRET instructions KVM: mark requests that need synchronization KVM: return if kvm_vcpu_wake_up() did wake up the VCPU KVM: add explicit barrier to kvm_vcpu_kick KVM: perform a wake_up in kvm_make_all_cpus_request KVM: mark requests that do not need a wakeup KVM: remove #ifndef CONFIG_S390 around kvm_vcpu_wake_up KVM: x86: always use kvm_make_request instead of set_bit KVM: add kvm_{test,clear}_request to replace {test,clear}_bit s390: kvm: Cpu model support for msa6, msa7 and msa8 KVM: x86: remove irq disablement around KVM_SET_CLOCK/KVM_GET_CLOCK kvm: better MWAIT emulation for guests KVM: x86: virtualize cpuid faulting ...
2017-05-08x86/kexec/64: Use gbpages for identity mappings if availableXunlei Pang1-0/+4
Kexec sets up all identity mappings before booting into the new kernel, and this will cause extra memory consumption for paging structures which is quite considerable on modern machines with huge memory sizes. E.g. on a 32TB machine that is kdumping, it could waste around 128MB (around 4MB/TB) from the reserved memory after kexec sets all the identity mappings using the current 2MB page. Add to that the memory needed for the loaded kdump kernel, initramfs, etc., and it causes a kexec syscall -NOMEM failure. As a result, we had to enlarge reserved memory via "crashkernel=X" to work around this problem. This causes some trouble for distributions that use policies to evaluate the proper "crashkernel=X" value for users. So enable gbpages for kexec mappings. Signed-off-by: Xunlei Pang <xlpang@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: akpm@linux-foundation.org Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/1493862171-8799-2-git-send-email-xlpang@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-08x86/mm: Add support for gbpages to kernel_ident_mapping_init()Xunlei Pang1-1/+1
Kernel identity mappings on x86-64 kernels are created in two ways: by the early x86 boot code, or by kernel_ident_mapping_init(). Native kernels (which is the dominant usecase) use the former, but the kexec and the hibernation code uses kernel_ident_mapping_init(). There's a subtle difference between these two ways of how identity mappings are created, the current kernel_ident_mapping_init() code creates identity mappings always using 2MB page(PMD level) - while the native kernel boot path also utilizes gbpages where available. This difference is suboptimal both for performance and for memory usage: kernel_ident_mapping_init() needs to allocate pages for the page tables when creating the new identity mappings. This patch adds 1GB page(PUD level) support to kernel_ident_mapping_init() to address these concerns. The primary advantage would be better TLB coverage/performance, because we'd utilize 1GB TLBs instead of 2MB ones. It is also useful for machines with large number of memory to save paging structure allocations(around 4MB/TB using 2MB page) when setting identity mappings for all the memory, after using 1GB page it will consume only 8KB/TB. ( Note that this change alone does not activate gbpages in kexec, we are doing that in a separate patch. ) Signed-off-by: Xunlei Pang <xlpang@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: akpm@linux-foundation.org Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/1493862171-8799-1-git-send-email-xlpang@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-05Merge branch 'linus' into x86/urgent, to pick up dependent commitsIngo Molnar70-1642/+2590
We are going to fix a bug introduced by a more recent commit, so refresh the tree. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-05Merge tag 'char-misc-4.12-rc1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of new char/misc driver drivers and features for 4.12-rc1. There's lots of new drivers added this time around, new firmware drivers from Google, more auxdisplay drivers, extcon drivers, fpga drivers, and a bunch of other driver updates. Nothing major, except if you happen to have the hardware for these drivers, and then you will be happy :) All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits) firmware: google memconsole: Fix return value check in platform_memconsole_init() firmware: Google VPD: Fix return value check in vpd_platform_init() goldfish_pipe: fix build warning about using too much stack. goldfish_pipe: An implementation of more parallel pipe fpga fr br: update supported version numbers fpga: region: release FPGA region reference in error path fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe() mei: drop the TODO from samples firmware: Google VPD sysfs driver firmware: Google VPD: import lib_vpd source files misc: lkdtm: Add volatile to intentional NULL pointer reference eeprom: idt_89hpesx: Add OF device ID table misc: ds1682: Add OF device ID table misc: tsl2550: Add OF device ID table w1: Remove unneeded use of assert() and remove w1_log.h w1: Use kernel common min() implementation uio_mf624: Align memory regions to page size and set correct offsets uio_mf624: Refactor memory info initialization uio: Allow handling of non page-aligned memory regions hangcheck-timer: Fix typo in comment ...
2017-05-04Merge tag 'for-linus-4.12b-rc0b-tag' of ↵Linus Torvalds4-31/+26
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Xen fixes and featrues for 4.12. The main changes are: - enable building the kernel with Xen support but without enabling paravirtualized mode (Vitaly Kuznetsov) - add a new 9pfs xen frontend driver (Stefano Stabellini) - simplify Xen's cpuid handling by making use of cpu capabilities (Juergen Gross) - add/modify some headers for new Xen paravirtualized devices (Oleksandr Andrushchenko) - EFI reset_system support under Xen (Julien Grall) - and the usual cleanups and corrections" * tag 'for-linus-4.12b-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (57 commits) xen: Move xen_have_vector_callback definition to enlighten.c xen: Implement EFI reset_system callback arm/xen: Consolidate calls to shutdown hypercall in a single helper xen: Export xen_reboot xen/x86: Call xen_smp_intr_init_pv() on BSP xen: Revert commits da72ff5bfcb0 and 72a9b186292d xen/pvh: Do not fill kernel's e820 map in init_pvh_bootparams() xen/scsifront: use offset_in_page() macro xen/arm,arm64: rename __generic_dma_ops to xen_get_dma_ops xen/arm,arm64: fix xen_dma_ops after 815dd18 "Consolidate get_dma_ops..." xen/9pfs: select CONFIG_XEN_XENBUS_FRONTEND x86/cpu: remove hypervisor specific set_cpu_features vmware: set cpu capabilities during platform initialization x86/xen: use capabilities instead of fake cpuid values for xsave x86/xen: use capabilities instead of fake cpuid values for x2apic x86/xen: use capabilities instead of fake cpuid values for mwait x86/xen: use capabilities instead of fake cpuid values for acpi x86/xen: use capabilities instead of fake cpuid values for acc x86/xen: use capabilities instead of fake cpuid values for mtrr x86/xen: use capabilities instead of fake cpuid values for aperf ...
2017-05-04Merge branches 'arm/exynos', 'arm/omap', 'arm/rockchip', 'arm/mediatek', ↵Joerg Roedel12-27/+31
'arm/smmu', 'arm/core', 'x86/vt-d', 'x86/amd' and 'core' into next
2017-05-04Merge tag 'trace-v4.12' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "New features for this release: - Pretty much a full rewrite of the processing of function plugins. i.e. echo do_IRQ:stacktrace > set_ftrace_filter - The rewrite was needed to add plugins to be unique to tracing instances. i.e. mkdir instance/foo; cd instances/foo; echo do_IRQ:stacktrace > set_ftrace_filter The old way was written very hacky. This removes a lot of those hacks. - New "function-fork" tracing option. When set, pids in the set_ftrace_pid will have their children added when the processes with their pids listed in the set_ftrace_pid file forks. - Exposure of "maxactive" for kretprobe in kprobe_events - Allow for builtin init functions to be traced by the function tracer (via the kernel command line). Module init function tracing will come in the next release. - Added more selftests, and have selftests also test in an instance" * tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (60 commits) ring-buffer: Return reader page back into existing ring buffer selftests: ftrace: Allow some event trigger tests to run in an instance selftests: ftrace: Have some basic tests run in a tracing instance too selftests: ftrace: Have event tests also run in an tracing instance selftests: ftrace: Make func_event_triggers and func_traceonoff_triggers tests do instances selftests: ftrace: Allow some tests to be run in a tracing instance tracing/ftrace: Allow for instances to trigger their own stacktrace probes tracing/ftrace: Allow for the traceonoff probe be unique to instances tracing/ftrace: Enable snapshot function trigger to work with instances tracing/ftrace: Allow instances to have their own function probes tracing/ftrace: Add a better way to pass data via the probe functions ftrace: Dynamically create the probe ftrace_ops for the trace_array tracing: Pass the trace_array into ftrace_probe_ops functions tracing: Have the trace_array hold the list of registered func probes ftrace: If the hash for a probe fails to update then free what was initialized ftrace: Have the function probes call their own function ftrace: Have each function probe use its own ftrace_ops ftrace: Have unregister_ftrace_function_probe_func() return a value ftrace: Add helper function ftrace_hash_move_and_update_ops() ftrace: Remove data field from ftrace_func_probe structure ...
2017-05-03Merge tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-0/+1
Pull drm u pdates from Dave Airlie: "This is the main drm pull request for v4.12. Apart from two fixes pulls, everything should have been in drm-next for at least 2 weeks. The biggest thing in here is AMD released the public headers for their upcoming VEGA GPUs. These as always are quite a sizeable chunk of header files. They've also added initial non-display support for those GPUs, though they aren't available in production yet. Otherwise it's pretty much normal. New bridge drivers: - megachips-stdpxxxx-ge-b850v3-fw LVDS->DP++ - generic LVDS bridge support. Core: - Displayport link train failure reporting to userspace - debugfs interface cleaned up - subsystem TODO in kerneldoc now - Extended fbdev support (flipping and vblank wait) - drm_platform removed - EDP CRC support in helper - HF-VSDB SCDC support in EDID parser - Lots of code cleanups and header extraction - Thunderbolt external GPU awareness - Atomic helper improvements - Documentation improvements panel: - Sitronix and Samsung new panel support amdgpu: - Preliminary vega10 support - Multi-level page table support - GPU sensor support for userspace - PRT support for sparse buffers - SR-IOV improvements - Non-contig VRAM CPU mapping i915: - Atomic modesetting enabled by default on Gen5+ - LSPCON improvements - Atomic state handling for cdclk - GPU reset improvements - In-kernel unit tests - Geminilake improvements and color manager support - Designware i2c fixes - vblank evasion improvements - Hotplug safe connector iterators - GVT scheduler QoS support - GVT Kabylake support nouveau: - Acceleration support for Pascal (GP10x). - Rearchitecture of code handling proprietary signed firmware - Fix GTX 970 with odd MMU configuration - GP10B support - GP107 acceleration support vmwgfx: - Atomic modesetting support for vmwgfx omapdrm: - Support for render nodes - Refactor omapdss code - Fix some probe ordering issues - Fix too dark RGB565 rendering sunxi: - prelim rework for multiple pipes. mali-dp: - Color management support - Plane scaling - Power management improvements imx-drm: - Prefetch Resolve Engine/Gasket on i.MX6QP - Deferred plane disabling - Separate alpha support mediatek: - Mediatek SoC MT2701 support rcar-du: - Gen3 HDMI support msm: - 4k support for newer chips - OPP bindings for gpu - prep work for per-process pagetables vc4: - HDMI audio support - fixes qxl: - minor fixes. dw-hdmi: - PHY improvements - CSC fixes - Amlogic GX SoC support" * tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux: (1778 commits) drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr() drm/nouveau/kms: Increase max retries in scanout position queries. drm/nouveau/bios/bitP: check that table is long enough for optional pointers drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine drm: mali-dp: use div_u64 for expensive 64-bit divisions drm/i915: Confirm the request is still active before adding it to the await drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio drm/i915/selftests: Allocate inode/file dynamically drm/i915: Fix system hang with EI UP masked on Haswell drm/i915: checking for NULL instead of IS_ERR() in mock selftests drm/i915: Perform link quality check unconditionally during long pulse drm/i915: Fix use after free in lpe_audio_platdev_destroy() drm/i915: Use the right mapping_gfp_mask for final shmem allocation drm/i915: Make legacy cursor updates more unsynced drm/i915: Apply a cond_resched() to the saturated signaler drm/i915: Park the signaler before sleeping drm: mali-dp: Check the mclk rate and allow up/down scaling drm: mali-dp: Enable image enhancement when scaling drm: mali-dp: Add plane upscaling support ...
2017-05-03Merge branch 'for-linus' of ↵Linus Torvalds2-1/+97
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatch updates from Jiri Kosina: - a per-task consistency model is being added for architectures that support reliable stack dumping (extending this, currently rather trivial set, is currently in the works). This extends the nature of the types of patches that can be applied by live patching infrastructure. The code stems from the design proposal made [1] back in November 2014. It's a hybrid of SUSE's kGraft and RH's kpatch, combining advantages of both: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Most of the heavy lifting done by Josh Poimboeuf with help from Miroslav Benes and Petr Mladek [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz - module load time patch optimization from Zhou Chengming - a few assorted small fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: add missing printk newlines livepatch: Cancel transition a safe way for immediate patches livepatch: Reduce the time of finding module symbols livepatch: make klp_mutex proper part of API livepatch: allow removal of a disabled patch livepatch: add /proc/<pid>/patch_state livepatch: change to a per-task consistency model livepatch: store function sizes livepatch: use kstrtobool() in enabled_store() livepatch: move patching functions into patch.c livepatch: remove unnecessary object loaded check livepatch: separate enabled and patched states livepatch/s390: add TIF_PATCH_PENDING thread flag livepatch/s390: reorganize TIF thread flag bits livepatch/powerpc: add TIF_PATCH_PENDING thread flag livepatch/x86: add TIF_PATCH_PENDING thread flag livepatch: create temporary klp_update_patch_state() stub x86/entry: define _TIF_ALLWORK_MASK flags explicitly stacktrace/x86: add function for detecting reliable stack traces
2017-05-02x86/cpu: remove hypervisor specific set_cpu_featuresJuergen Gross2-9/+0
There is no user of x86_hyper->set_cpu_features() any more. Remove it. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02vmware: set cpu capabilities during platform initializationJuergen Gross1-19/+20
There is no need to set the same capabilities for each cpu individually. This can be done for all cpus in platform initialization. Cc: Alok Kataria <akataria@vmware.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Alok Kataria <akataria@vmware.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02x86/xen: add CONFIG_XEN_PV to KconfigVitaly Kuznetsov2-2/+4
All code to support Xen PV will get under this new option. For the beginning, check for it in the common code. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02x86/xen: separate PV and HVM hypervisorsVitaly Kuznetsov1-1/+2
As a preparation to splitting the code we need to untangle it: x86_hyper_xen -> x86_hyper_xen_hvm and x86_hyper_xen_pv xen_platform() -> xen_platform_hvm() and xen_platform_pv() xen_cpu_up_prepare() -> xen_cpu_up_prepare_pv() and xen_cpu_up_prepare_hvm() xen_cpu_dead() -> xen_cpu_dead_pv() and xen_cpu_dead_pv_hvm() Add two parameters to xen_cpuhp_setup() to pass proper cpu_up_prepare and cpu_dead hooks. xen_set_cpu_features() is now PV-only so the redundant xen_pv_domain() check can be dropped. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds16-70/+188
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: "The main x86 MM changes in this cycle were: - continued native kernel PCID support preparation patches to the TLB flushing code (Andy Lutomirski) - various fixes related to 32-bit compat syscall returning address over 4Gb in applications, launched from 64-bit binaries - motivated by C/R frameworks such as Virtuozzo. (Dmitry Safonov) - continued Intel 5-level paging enablement: in particular the conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov) - x86/mpx ABI corner case fixes/enhancements (Joerg Roedel) - ... plus misc updates, fixes and cleanups" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits) mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash x86/mm: Fix flush_tlb_page() on Xen x86/mm: Make flush_tlb_mm_range() more predictable x86/mm: Remove flush_tlb() and flush_tlb_current_task() x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly() x86/mm/64: Fix crash in remove_pagetable() Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation" x86/boot/e820: Remove a redundant self assignment x86/mm: Fix dump pagetables for 4 levels of page tables x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()" x86/espfix: Add support for 5-level paging x86/kasan: Extend KASAN to support 5-level paging x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y x86/paravirt: Add 5-level support to the paravirt code x86/mm: Define virtual memory map for 5-level paging x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert x86/boot: Detect 5-level paging support x86/mm/numa: Remove numa_nodemask_from_meminfo() ...
2017-05-02Merge branch 'x86-irq-for-linus' of ↵Linus Torvalds1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 irq update from Ingo Molnar: "A single commit that micro-optimizes an IRQ vectors code path in the CPU offlining code" * 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Optimize free vector check in the CPU offline path
2017-05-02Merge branch 'x86-debug-for-linus' of ↵Linus Torvalds2-0/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 debug updates from Ingo Molnar: "The biggest update is the addition of USB3 debug port based early-console. Greg was fine with the USB changes and with the routing of these patches: https://www.spinics.net/lists/linux-usb/msg155093.html" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: usb/doc: Add document for USB3 debug port usage usb/serial: Add DBC debug device support to usb_debug x86/earlyprintk: Add support for earlyprintk via USB3 debug port usb/early: Add driver for xhci debug capability x86/timers: Add simple udelay calibration
2017-05-02Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds2-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "A handful of small cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Remove a redundant #ifdef directive x86/smp: Remove the redundant #ifdef CONFIG_SMP directive x86/smp: Reduce code duplication x86/pci-calgary: Use setup_timer() instead of open coding it.
2017-05-02Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds10-142/+425
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "The main changes in this cycle were: - unwinder fixes and enhancements - improve ftrace interaction with the unwinder - optimize the code footprint of WARN() and related debugging constructs - ... plus misc updates, cleanups and fixes" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/unwind: Dump all stacks in unwind_dump() x86/unwind: Silence more entry-code related warnings x86/ftrace: Fix ebp in ftrace_regs_caller that screws up unwinder x86/unwind: Remove unused 'sp' parameter in unwind_dump() x86/unwind: Prepend hex mask value with '0x' in unwind_dump() x86/unwind: Properly zero-pad 32-bit values in unwind_dump() x86/unwind: Ensure stack pointer is aligned debug: Avoid setting BUGFLAG_WARNING twice x86/unwind: Silence entry-related warnings x86/unwind: Read stack return address in update_stack_state() x86/unwind: Move common code into update_stack_state() debug: Fix __bug_table[] in arch linker scripts debug: Add _ONCE() logic to report_bug() x86/debug: Define BUG() again for !CONFIG_BUG x86/debug: Implement __WARN() using UD0 x86/ftrace: Use Makefile logic instead of #ifdef for compiling ftrace_*.o x86/ftrace: Add -mfentry support to x86_32 with DYNAMIC_FTRACE set x86/ftrace: Clean up ftrace_regs_caller x86/ftrace: Add stack frame pointer to ftrace_caller x86/ftrace: Move the ftrace specific code out of entry_32.S ...
2017-05-02Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Ingo Molnar: "Two small cleanups" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Fix a comment in init_apic_mappings() x86/apic: Remove the SET_APIC_ID(x) macro
2017-05-02Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds6-192/+481
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Ingo Molnar: "The biggest changes are an extension of the Intel RDT code to extend it with Intel Memory Bandwidth Allocation CPU support: MBA allows bandwidth allocation between cores, while CBM (already upstream) allows CPU cache partitioning. There's also misc smaller fixes and updates" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/intel_rdt: Return error for incorrect resource names in schemata x86/intel_rdt: Trim whitespace while parsing schemata input x86/intel_rdt: Fix padding when resource is enabled via mount x86/intel_rdt: Get rid of anon union x86/cpu: Keep model defines sorted by model number x86/intel_rdt/mba: Add schemata file support for MBA x86/intel_rdt: Make schemata file parsers resource specific x86/intel_rdt/mba: Add info directory files for Memory Bandwidth Allocation x86/intel_rdt: Make information files resource specific x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA) x86/intel_rdt/mba: Memory bandwith allocation feature detect x86/intel_rdt: Add resource specific msr update function x86/intel_rdt: Move CBM specific data into a struct x86/intel_rdt: Cleanup namespace to support multiple resource types Documentation, x86: Intel Memory bandwidth allocation x86/intel_rdt: Organize code properly x86/intel_rdt: Init padding only if a device exists x86/intel_rdt: Add cpus_list rdtgroup file x86/intel_rdt: Cleanup kernel-doc x86/intel_rdt: Update schemata read to show data in tabular format ...
2017-05-02Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds23-639/+623
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: "The biggest changes in this cycle were: - reworking of the e820 code: separate in-kernel and boot-ABI data structures and apply a whole range of cleanups to the kernel side. No change in functionality. - enable KASLR by default: it's used by all major distros and it's out of the experimental stage as well. - ... misc fixes and cleanups" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits) x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails x86/reboot: Turn off KVM when halting a CPU x86/boot: Fix BSS corruption/overwrite bug in early x86 kernel startup x86: Enable KASLR by default boot/param: Move next_arg() function to lib/cmdline.c for later reuse x86/boot: Fix Sparse warning by including required header file x86/boot/64: Rename start_cpu() x86/xen: Update e820 table handling to the new core x86 E820 code x86/boot: Fix pr_debug() API braindamage xen, x86/headers: Add <linux/device.h> dependency to <asm/xen/page.h> x86/boot/e820: Simplify e820__update_table() x86/boot/e820: Separate the E820 ABI structures from the in-kernel structures x86/boot/e820: Fix and clean up e820_type switch() statements x86/boot/e820: Rename the remaining E820 APIs to the e820__*() prefix x86/boot/e820: Remove unnecessary #include's x86/boot/e820: Rename e820_mark_nosave_regions() to e820__register_nosave_regions() x86/boot/e820: Rename e820_reserve_resources*() to e820__reserve_resources*() x86/boot/e820: Use bool in query APIs x86/boot/e820: Document e820__reserve_setup_data() x86/boot/e820: Clean up __e820__update_table() et al ...
2017-05-02Merge branch 'ras-core-for-linus' of ↵Linus Torvalds6-427/+549
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Ingo Molnar: "The main changes in this cycle were: - add the 'Corrected Errors Collector' kernel feature which collect and monitor correctable errors statistics and will preemptively (soft-)offline physical pages that have a suspiciously high error count. - handle MCE errors during kexec() more gracefully - factor out and deprecate the /dev/mcelog driver - ... plus misc fixes and cleanpus" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Check MCi_STATUS[MISCV] for usable addr on Intel only ACPI/APEI: Use setup_deferrable_timer() x86/mce: Update notifier priority check x86/mce: Enable PPIN for Knights Landing/Mill x86/mce: Do not register notifiers with invalid prio x86/mce: Factor out and deprecate the /dev/mcelog driver RAS: Add a Corrected Errors Collector x86/mce: Rename mce_log to mce_log_buffer x86/mce: Rename mce_log()'s argument x86/mce: Init some CPU features early x86/mce: Handle broadcasted MCE gracefully with kexec
2017-05-02Merge branch 'perf-core-for-linus' of ↵Linus Torvalds4-81/+87
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main changes in this cycle were: Kernel side changes: - Kprobes and uprobes changes: - Make their trampolines read-only while they are used - Make UPROBES_EVENTS default-y which is the distro practice - Apply misc fixes and robustization to probe point insertion. - add support for AMD IOMMU events - extend hw events on Intel Goldmont CPUs - ... plus misc fixes and updates. Tooling side changes: - support s390 jump instructions in perf annotate (Christian Borntraeger) - vendor hardware events updates (Andi Kleen) - add argument support for SDT events in powerpc (Ravi Bangoria) - beautify the statx syscall arguments in 'perf trace' (Arnaldo Carvalho de Melo) - handle inline functions in callchains (Jin Yao) - enable sorting by srcline as key (Milian Wolff) - add 'brstackinsn' field in 'perf script' to reuse the x86 instruction decoder used in the Intel PT code to study hot paths to samples (Andi Kleen) - add PERF_RECORD_NAMESPACES so that the kernel can record information required to associate samples to namespaces, helping in container problem characterization. (Hari Bathini) - allow sorting by symbol_size in 'perf report' and 'perf top' (Charles Baylis) - in perf stat, make system wide (-a) the default option if no target was specified and one of following conditions is met: - no workload specified (current behaviour) - a workload is specified but all requested events are system wide ones, like uncore ones. (Jiri Olsa) - ... plus lots of other updates, enhancements, cleanups and fixes" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (235 commits) perf tools: Fix the code to strip command name tools arch x86: Sync cpufeatures.h tools arch: Sync arch/x86/lib/memcpy_64.S with the kernel tools: Update asm-generic/mman-common.h copy from the kernel perf tools: Use just forward declarations for struct thread where possible perf tools: Add the right header to obtain PERF_ALIGN() perf tools: Remove poll.h and wait.h from util.h perf tools: Remove string.h, unistd.h and sys/stat.h from util.h perf tools: Remove stale prototypes from builtin.h perf tools: Remove string.h from util.h perf tools: Remove sys/ioctl.h from util.h perf tools: Remove a few more needless includes from util.h perf tools: Include sys/param.h where needed perf callchain: Move callchain specific routines from util.[ch] perf tools: Add compress.h for the *_decompress_to_file() headers perf mem: Fix display of data source snoop indication perf debug: Move dump_stack() and sighandler_dump_stack() to debug.h perf kvm: Make function only used by 'perf kvm' static perf tools: Move timestamp routines from util.h to time-utils.h perf tools: Move units conversion/formatting routines to separate object ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 15:22:57 +0300