| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Fix confusing output from /sys/kernel/debug/ras/daemon_active
- Add another MCE severity error case to the Intel error severity table
to promote UC and AR errors to panic severity and remove the
corresponding code condition doing that.
- Make sure the thresholding and deferred error interrupts on AMD SMCA
systems clear the all registers reporting an error so that there are
no multiple errors logged for the same event
* tag 'ras_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
RAS: Fix return value from show_trace()
x86/mce: Use severity table to handle uncorrected errors in kernel
x86/MCE/AMD: Clear DFR errors found in THR handler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 splitlock updates from Dave Hansen:
"Add a sysctl to control the split lock misery mode.
This enables users to reduce the penalty inflicted on split lock
users. There are some proprietary, binary-only games which became
entirely unplayable with the old penalty.
Anyone opting into the new mode is, of course, more exposed to the DoS
nasitness inherent with split locks, but they can play their games
again"
* tag 'x86_splitlock_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Add sysctl to control the misery mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Dave Hansen:
"These declare the resource control (rectrl) MSRs a bit more normally
and clean up an unnecessary structure member:
- Remove unnecessary arch_has_empty_bitmaps structure memory
- Move rescrtl MSR defines into msr-index.h, like normal MSRs"
* tag 'x86_cache_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Move MSR defines into msr-index.h
x86/resctrl: Remove arch_has_empty_bitmaps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 sgx updates from Dave Hansen:
"The biggest deal in this series is support for a new hardware feature
that allows enclaves to detect and mitigate single-stepping attacks.
There's also a minor performance tweak and a little piece of the
kmap_atomic() -> kmap_local() transition.
Summary:
- Introduce a new SGX feature (Asynchrounous Exit Notification) for
bare-metal enclaves and KVM guests to mitigate single-step attacks
- Increase batching to speed up enclave release
- Replace kmap/kunmap_atomic() calls"
* tag 'x86_sgx_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Replace kmap/kunmap_atomic() calls
KVM/VMX: Allow exposing EDECCSSA user leaf function to KVM guest
x86/sgx: Allow enclaves to use Asynchrounous Exit Notification
x86/sgx: Reduce delay and interference of enclave release
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Drop unregister syscore from hyperv_cleanup to avoid hang (Gaurav
Kohli)
- Clean up panic path for Hyper-V framebuffer (Guilherme G. Piccoli)
- Allow IRQ remapping to work without x2apic (Nuno Das Neves)
- Fix comments (Olaf Hering)
- Expand hv_vp_assist_page definition (Saurabh Sengar)
- Improvement to page reporting (Shradha Gupta)
- Make sure TSC clocksource works when Linux runs as the root partition
(Stanislav Kinsburskiy)
* tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
iommu/hyper-v: Allow hyperv irq remapping without x2apic
clocksource: hyper-v: Add TSC page support for root partition
clocksource: hyper-v: Use TSC PFN getter to map vvar page
clocksource: hyper-v: Introduce TSC PFN getter
clocksource: hyper-v: Introduce a pointer to TSC page
x86/hyperv: Expand definition of struct hv_vp_assist_page
PCI: hv: update comment in x86 specific hv_arch_irq_unmask
hv: fix comment typo in vmbus_channel/low_latency
drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers
video: hyperv_fb: Avoid taking busy spinlock on panic path
hv_balloon: Add support for configurable order free page reporting
mm/page_reporting: Add checks for page_reporting_order param
|
|
The "force" argument to write_spec_ctrl_current() is currently ambiguous
as it does not guarantee the MSR write. This is due to the optimization
that writes to the MSR happen only when the new value differs from the
cached value.
This is fine in most cases, but breaks for S3 resume when the cached MSR
value gets out of sync with the hardware MSR value due to S3 resetting
it.
When x86_spec_ctrl_current is same as x86_spec_ctrl_base, the MSR write
is skipped. Which results in SPEC_CTRL mitigations not getting restored.
Move the MSR write from write_spec_ctrl_current() to a new function that
unconditionally writes to the MSR. Update the callers accordingly and
rename functions.
[ bp: Rework a bit. ]
Fixes: caa0ff24d5d0 ("x86/bugs: Keep a per-CPU IA32_SPEC_CTRL value")
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/806d39b0bfec2fe8f50dc5446dff20f5bb24a959.1669821572.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kmap_local_page() is the preferred way to create temporary mappings when it
is feasible, because the mappings are thread-local and CPU-local.
kmap_local_page() uses per-task maps rather than per-CPU maps. This in
effect removes the need to disable preemption on the local CPU while the
mapping is active, and thus vastly reduces overall system latency. It is
also valid to take pagefaults within the mapped region.
The use of kmap_atomic() in the SGX code was not an explicit design choice
to disable page faults or preemption, and there is no compelling design
reason to using kmap_atomic() vs. kmap_local_page().
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/linux-sgx/Y0biN3%2FJsZMa0yUr@kernel.org/
Link: https://lore.kernel.org/r/20221115161627.4169428-1-kristen@linux.intel.com
|
|
If x2apic is not available, hyperv-iommu skips remapping
irqs. This breaks root partition which always needs irqs
remapped.
Fix this by allowing irq remapping regardless of x2apic,
and change hyperv_enable_irq_remapping() to return
IRQ_REMAP_XAPIC_MODE in case x2apic is missing.
Tested with root and non-root hyperv partitions.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1668715899-8971-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
msr-index.h should contain all MSRs for easier grepping for MSR numbers
when dealing with unchecked MSR access warnings, for example.
Move the resctrl ones. Prefix IA32_PQR_ASSOC with "MSR_" while at it.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221106212923.20699-1-bp@alien8.de
|
|
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Support for the TSX control MSR is enumerated in MSR_IA32_ARCH_CAPABILITIES.
This is different from how other CPU features are enumerated i.e. via
CPUID. Currently, a call to tsx_ctrl_is_supported() is required for
enumerating the feature. In the absence of a feature bit for TSX control,
any code that relies on checking feature bits directly will not work.
In preparation for adding a feature bit check in MSR save/restore
during suspend/resume, set a new feature bit X86_FEATURE_TSX_CTRL when
MSR_IA32_TSX_CTRL is present. Also make tsx_ctrl_is_supported() use the
new feature bit to avoid any overhead of reading the MSR.
[ bp: Remove tsx_ctrl_is_supported(), add room for two more feature
bits in word 11 which are coming up in the next merge window. ]
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/de619764e1d98afbb7a5fa58424f1278ede37b45.1668539735.git.pawan.kumar.gupta@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Do not hold fpregs lock when inheriting FPU permissions because the
fpregs lock disables preemption on RT but fpu_inherit_perms() does
spin_lock_irq(), which, on RT, uses rtmutexes and they need to be
preemptible.
- Check the page offset and the length of the data supplied by
userspace for overflow when specifying a set of pages to add to an
SGX enclave
* tag 'x86_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Drop fpregs lock before inheriting FPU permissions
x86/sgx: Add overflow check in sgx_validate_offset_length()
|
|
This has nothing to do with random.c and everything to do with stack
protectors. Yes, it uses randomness. But many things use randomness.
random.h and random.c are concerned with the generation of randomness,
not with each and every use. So move this function into the more
specific stackprotector.h file where it belongs.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
DE_CFG contains the LFENCE serializing bit, restore it on resume too.
This is relevant to older families due to the way how they do S3.
Unify and correct naming while at it.
Fixes: e4d0e84e4907 ("x86/cpu/AMD: Make LFENCE a serializing instruction")
Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Reported-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit b041b525dab9 ("x86/split_lock: Make life miserable for split lockers")
changed the way the split lock detector works when in "warn" mode;
basically, it not only shows the warn message, but also intentionally
introduces a slowdown through sleeping plus serialization mechanism
on such task. Based on discussions in [0], seems the warning alone
wasn't enough motivation for userspace developers to fix their
applications.
This slowdown is enough to totally break some proprietary (aka.
unfixable) userspace[1].
Happens that originally the proposal in [0] was to add a new mode
which would warns + slowdown the "split locking" task, keeping the
old warn mode untouched. In the end, that idea was discarded and
the regular/default "warn" mode now slows down the applications. This
is quite aggressive with regards proprietary/legacy programs that
basically are unable to properly run in kernel with this change.
While it is understandable that a malicious application could DoS
by split locking, it seems unacceptable to regress old/proprietary
userspace programs through a default configuration that previously
worked. An example of such breakage was reported in [1].
Add a sysctl to allow controlling the "misery mode" behavior, as per
Thomas suggestion on [2]. This way, users running legacy and/or
proprietary software are allowed to still execute them with a decent
performance while still observing the warning messages on kernel log.
[0] https://lore.kernel.org/lkml/20220217012721.9694-1-tony.luck@intel.com/
[1] https://github.com/doitsujin/dxvk/issues/2938
[2] https://lore.kernel.org/lkml/87pmf4bter.ffs@tglx/
[ dhansen: minor changelog tweaks, including clarifying the actual
problem ]
Fixes: b041b525dab9 ("x86/split_lock: Make life miserable for split lockers")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Andre Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/all/20221024200254.635256-1-gpiccoli%40igalia.com
|
|
x86_virt_spec_ctrl only deals with the paravirtualized
MSR_IA32_VIRT_SPEC_CTRL now and does not handle MSR_IA32_SPEC_CTRL
anymore; remove the corresponding, unused argument.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Restoration of the host IA32_SPEC_CTRL value is probably too late
with respect to the return thunk training sequence.
With respect to the user/kernel boundary, AMD says, "If software chooses
to toggle STIBP (e.g., set STIBP on kernel entry, and clear it on kernel
exit), software should set STIBP to 1 before executing the return thunk
training sequence." I assume the same requirements apply to the guest/host
boundary. The return thunk training sequence is in vmenter.S, quite close
to the VM-exit. On hosts without V_SPEC_CTRL, however, the host's
IA32_SPEC_CTRL value is not restored until much later.
To avoid this, move the restoration of host SPEC_CTRL to assembly and,
for consistency, move the restoration of the guest SPEC_CTRL as well.
This is not particularly difficult, apart from some care to cover both
32- and 64-bit, and to share code between SEV-ES and normal vmentry.
Cc: stable@vger.kernel.org
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
sgx_validate_offset_length() function verifies "offset" and "length"
arguments provided by userspace, but was missing an overflow check on
their addition. Add it.
Fixes: c6d26d370767 ("x86/sgx: Add SGX_IOC_ENCLAVE_ADD_PAGES")
Signed-off-by: Borys Popławski <borysp@invisiblethingslab.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: stable@vger.kernel.org # v5.11+
Link: https://lore.kernel.org/r/0d91ac79-6d84-abed-5821-4dbe59fa1a38@invisiblethingslab.com
|
|
The new Asynchronous Exit (AEX) notification mechanism (AEX-notify)
allows one enclave to receive a notification in the ERESUME after the
enclave exit due to an AEX. EDECCSSA is a new SGX user leaf function
(ENCLU[EDECCSSA]) to facilitate the AEX notification handling. The new
EDECCSSA is enumerated via CPUID(EAX=0x12,ECX=0x0):EAX[11].
Besides Allowing reporting the new AEX-notify attribute to KVM guests,
also allow reporting the new EDECCSSA user leaf function to KVM guests
so the guest can fully utilize the AEX-notify mechanism.
Similar to existing X86_FEATURE_SGX1 and X86_FEATURE_SGX2, introduce a
new scattered X86_FEATURE_SGX_EDECCSSA bit for the new EDECCSSA, and
report it in KVM's supported CPUIDs.
Note, no additional KVM enabling is required to allow the guest to use
EDECCSSA. It's impossible to trap ENCLU (without completely preventing
the guest from using SGX). Advertise EDECCSSA as supported purely so
that userspace doesn't need to special case EDECCSSA, i.e. doesn't need
to manually check host CPUID.
The inability to trap ENCLU also means that KVM can't prevent the guest
from using EDECCSSA, but that virtualization hole is benign as far as
KVM is concerned. EDECCSSA is simply a fancy way to modify internal
enclave state.
More background about how do AEX-notify and EDECCSSA work:
SGX maintains a Current State Save Area Frame (CSSA) for each enclave
thread. When AEX happens, the enclave thread context is saved to the
CSSA and the CSSA is increased by 1. For a normal ERESUME which doesn't
deliver AEX notification, it restores the saved thread context from the
previously saved SSA and decreases the CSSA. If AEX-notify is enabled
for one enclave, the ERESUME acts differently. Instead of restoring the
saved thread context and decreasing the CSSA, it acts like EENTER which
doesn't decrease the CSSA but establishes a clean slate thread context
using the CSSA for the enclave to handle the notification. After some
handling, the enclave must discard the "new-established" SSA and switch
back to the previously saved SSA (upon AEX). Otherwise, the enclave
will run out of SSA space upon further AEXs and eventually fail to run.
To solve this problem, the new EDECCSSA essentially decreases the CSSA.
It can be used by the enclave notification handler to switch back to the
previous saved SSA when needed, i.e. after it handles the notification.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/all/20221101022422.858944-1-kai.huang%40intel.com
|
|
Short Version:
Allow enclaves to use the new Asynchronous EXit (AEX)
notification mechanism. This mechanism lets enclaves run a
handler after an AEX event. These handlers can run mitigations
for things like SGX-Step[1].
AEX Notify will be made available both on upcoming processors and
on some older processors through microcode updates.
Long Version:
== SGX Attribute Background ==
The SGX architecture includes a list of SGX "attributes". These
attributes ensure consistency and transparency around specific
enclave features.
As a simple example, the "DEBUG" attribute allows an enclave to
be debugged, but also destroys virtually all of SGX security.
Using attributes, enclaves can know that they are being debugged.
Attributes also affect enclave attestation so an enclave can, for
instance, be denied access to secrets while it is being debugged.
The kernel keeps a list of known attributes and will only
initialize enclaves that use a known set of attributes. This
kernel policy eliminates the chance that a new SGX attribute
could cause undesired effects.
For example, imagine a new attribute was added called
"PROVISIONKEY2" that provided similar functionality to
"PROVISIIONKEY". A kernel policy that allowed indiscriminate use
of unknown attributes and thus PROVISIONKEY2 would undermine the
existing kernel policy which limits use of PROVISIONKEY enclaves.
== AEX Notify Background ==
"Intel Architecture Instruction Set Extensions and Future
Features - Version 45" is out[2]. There is a new chapter:
Asynchronous Enclave Exit Notify and the EDECCSSA User Leaf Function.
Enclaves exit can be either synchronous and consensual (EEXIT for
instance) or asynchronous (on an interrupt or fault). The
asynchronous ones can evidently be exploited to single step
enclaves[1], on top of which other naughty things can be built.
AEX Notify will be made available both on upcoming processors and
on some older processors through microcode updates.
== The Problem ==
These attacks are currently entirely opaque to the enclave since
the hardware does the save/restore under the covers. The
Asynchronous Enclave Exit Notify (AEX Notify) mechanism provides
enclaves an ability to detect and mitigate potential exposure to
these kinds of attacks.
== The Solution ==
Define the new attribute value for AEX Notification. Ensure the
attribute is cleared from the list reserved attributes. Instead
of adding to the open-coded lists of individual attributes,
add named lists of privileged (disallowed by default) and
unprivileged (allowed by default) attributes. Add the AEX notify
attribute as an unprivileged attribute, which will keep the kernel
from rejecting enclaves with it set.
1. https://github.com/jovanbulck/sgx-step
2. https://cdrdv2.intel.com/v1/dl/getContent/671368?explicitVersion=true
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20220720191347.1343986-1-dave.hansen%40linux.intel.com
|
|
commit 8795359e35bc ("x86/sgx: Silence softlockup detection when
releasing large enclaves") introduced a cond_resched() during enclave
release where the EREMOVE instruction is applied to every 4k enclave
page. Giving other tasks an opportunity to run while tearing down a
large enclave placates the soft lockup detector but Iqbal found
that the fix causes a 25% performance degradation of a workload
run using Gramine.
Gramine maintains a 1:1 mapping between processes and SGX enclaves.
That means if a workload in an enclave creates a subprocess then
Gramine creates a duplicate enclave for that subprocess to run in.
The consequence is that the release of the enclave used to run
the subprocess can impact the performance of the workload that is
run in the original enclave, especially in large enclaves when
SGX2 is not in use.
The workload run by Iqbal behaves as follows:
Create enclave (enclave "A")
/* Initialize workload in enclave "A" */
Create enclave (enclave "B")
/* Run subprocess in enclave "B" and send result to enclave "A" */
Release enclave (enclave "B")
/* Run workload in enclave "A" */
Release enclave (enclave "A")
The performance impact of releasing enclave "B" in the above scenario
is amplified when there is a lot of SGX memory and the enclave size
matches the SGX memory. When there is 128GB SGX memory and an enclave
size of 128GB, from the time enclave "B" starts the 128GB SGX memory
is oversubscribed with a combined demand for 256GB from the two
enclaves.
Before commit 8795359e35bc ("x86/sgx: Silence softlockup detection when
releasing large enclaves") enclave release was done in a tight loop
without giving other tasks a chance to run. Even though the system
experienced soft lockups the workload (run in enclave "A") obtained
good performance numbers because when the workload started running
there was no interference.
Commit 8795359e35bc ("x86/sgx: Silence softlockup detection when
releasing large enclaves") gave other tasks opportunity to run while an
enclave is released. The impact of this in this scenario is that while
enclave "B" is released and needing to access each page that belongs
to it in order to run the SGX EREMOVE instruction on it, enclave "A"
is attempting to run the workload needing to access the enclave
pages that belong to it. This causes a lot of swapping due to the
demand for the oversubscribed SGX memory. Longer latencies are
experienced by the workload in enclave "A" while enclave "B" is
released.
Improve the performance of enclave release while still avoiding the
soft lockup detector with two enhancements:
- Only call cond_resched() after XA_CHECK_SCHED iterations.
- Use the xarray advanced API to keep the xarray locked for
XA_CHECK_SCHED iterations instead of locking and unlocking
at every iteration.
This batching solution is copied from sgx_encl_may_map() that
also iterates through all enclave pages using this technique.
With this enhancement the workload experiences a 5%
performance degradation when compared to a kernel without
commit 8795359e35bc ("x86/sgx: Silence softlockup detection when
releasing large enclaves"), an improvement to the reported 25%
degradation, while still placating the soft lockup detector.
Scenarios with poor performance are still possible even with these
enhancements. For example, short workloads creating sub processes
while running in large enclaves. Further performance improvements
are pursued in user space through avoiding to create duplicate enclaves
for certain sub processes, and using SGX2 that will do lazy allocation
of pages as needed so enclaves created for sub processes start quickly
and release quickly.
Fixes: 8795359e35bc ("x86/sgx: Silence softlockup detection when releasing large enclaves")
Reported-by: Md Iqbal Hossain <md.iqbal.hossain@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Md Iqbal Hossain <md.iqbal.hossain@intel.com>
Link: https://lore.kernel.org/all/00efa80dd9e35dc85753e1c5edb0344ac07bb1f0.1667236485.git.reinette.chatre%40intel.com
|
|
mce_severity_intel() has a special case to promote UC and AR errors
in kernel context to PANIC severity.
The "AR" case is already handled with separate entries in the severity
table for all instruction fetch errors, and those data fetch errors that
are not in a recoverable area of the kernel (i.e. have an extable fixup
entry).
Add an entry to the severity table for UC errors in kernel context that
reports severity = PANIC. Delete the special case code from
mce_severity_intel().
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220922195136.54575-2-tony.luck@intel.com
|
|
AMD's MCA Thresholding feature counts errors of all severity levels, not
just correctable errors. If a deferred error causes the threshold limit
to be reached (it was the error that caused the overflow), then both a
deferred error interrupt and a thresholding interrupt will be triggered.
The order of the interrupts is not guaranteed. If the threshold
interrupt handler is executed first, then it will clear MCA_STATUS for
the error. It will not check or clear MCA_DESTAT which also holds a copy
of the deferred error. When the deferred error interrupt handler runs it
will not find an error in MCA_STATUS, but it will find the error in
MCA_DESTAT. This will cause two errors to be logged.
Check for deferred errors when handling a threshold interrupt. If a bank
contains a deferred error, then clear the bank's MCA_DESTAT register.
Define a new helper function to do the deferred error check and clearing
of MCA_DESTAT.
[ bp: Simplify, convert comment to passive voice. ]
Fixes: 37d43acfd79f ("x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220621155943.33623-1-yazen.ghannam@amd.com
|
|
The field arch_has_empty_bitmaps is not required anymore. The field
min_cbm_bits is enough to validate the CBM (capacity bit mask) if the
architecture can support the zero CBM or not.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/166430979654.372014.615622285687642644.stgit@bmoger-ubuntu
|
|
AMD systems support zero CBM (capacity bit mask) for cache allocation.
That is reflected in rdt_init_res_defs_amd() by:
r->cache.arch_has_empty_bitmaps = true;
However given the unified code in cbm_validate(), checking for:
val == 0 && !arch_has_empty_bitmaps
is not enough because of another check in cbm_validate():
if ((zero_bit - first_bit) < r->cache.min_cbm_bits)
The default value of r->cache.min_cbm_bits = 1.
Leading to:
$ cd /sys/fs/resctrl
$ mkdir foo
$ cd foo
$ echo L3:0=0 > schemata
-bash: echo: write error: Invalid argument
$ cat /sys/fs/resctrl/info/last_cmd_status
Need at least 1 bits in the mask
Initialize the min_cbm_bits to 0 for AMD. Also, remove the default
setting of min_cbm_bits and initialize it separately.
After the fix:
$ cd /sys/fs/resctrl
$ mkdir foo
$ cd foo
$ echo L3:0=0 > schemata
$ cat /sys/fs/resctrl/info/last_cmd_status
ok
Fixes: 316e7f901f5a ("x86/resctrl: Add struct rdt_cache::arch_has_{sparse, empty}_bitmaps")
Co-developed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/lkml/20220517001234.3137157-1-eranian@google.com
|
|
Currently, the patch application logic checks whether the revision
needs to be applied on each logical CPU (SMT thread). Therefore, on SMT
designs where the microcode engine is shared between the two threads,
the application happens only on one of them as that is enough to update
the shared microcode engine.
However, there are microcode patches which do per-thread modification,
see Link tag below.
Therefore, drop the revision check and try applying on each thread. This
is what the BIOS does too so this method is very much tested.
Btw, change only the early paths. On the late loading paths, there's no
point in doing per-thread modification because if is it some case like
in the bugzilla below - removing a CPUID flag - the kernel cannot go and
un-use features it has detected are there early. For that, one should
use early loading anyway.
[ bp: Fixes does not contain the oldest commit which did check for
equality but that is good enough. ]
Fixes: 8801b3fcb574 ("x86/microcode/AMD: Rework container parsing")
Reported-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216211
|
|
Today, core ID is assumed to be unique within each package.
But an AlderLake-N platform adds a Module level between core and package,
Linux excludes the unknown modules bits from the core ID, resulting in
duplicate core ID's.
To keep core ID unique within a package, Linux must include all APIC-ID
bits for known or unknown levels above the core and below the package
in the core ID.
It is important to understand that core ID's have always come directly
from the APIC-ID encoding, which comes from the BIOS. Thus there is no
guarantee that they start at 0, or that they are contiguous.
As such, naively using them for array indexes can be problematic.
[ dhansen: un-known -> unknown ]
Fixes: 7745f03eb395 ("x86/topology: Add CPUID.1F multi-die/package support")
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221014090147.1836-5-rui.zhang@intel.com
|
|
CPUID.1F/B does not enumerate Package level explicitly, instead, all the
APIC-ID bits above the enumerated levels are assumed to be package ID
bits.
Current code gets package ID by shifting out all the APIC-ID bits that
Linux supports, rather than shifting out all the APIC-ID bits that
CPUID.1F enumerates. This introduces problems when CPUID.1F enumerates a
level that Linux does not support.
For example, on a single package AlderLake-N, there are 2 Ecore Modules
with 4 atom cores in each module. Linux does not support the Module
level and interprets the Module ID bits as package ID and erroneously
reports a multi module system as a multi-package system.
Fix this by using APIC-ID bits above all the CPUID.1F enumerated levels
as package ID.
[ dhansen: spelling fix ]
Fixes: 7745f03eb395 ("x86/topology: Add CPUID.1F multi-die/package support")
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221014090147.1836-4-rui.zhang@intel.com
|
|
The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"PMU driver updates:
- Add AMD Last Branch Record Extension Version 2 (LbrExtV2) feature
support for Zen 4 processors.
- Extend the perf ABI to provide branch speculation information, if
available, and use this on CPUs that have it (eg. LbrExtV2).
- Improve Intel PEBS TSC timestamp handling & integration.
- Add Intel Raptor Lake S CPU support.
- Add 'perf mem' and 'perf c2c' memory profiling support on AMD CPUs
by utilizing IBS tagged load/store samples.
- Clean up & optimize various x86 PMU details.
HW breakpoints:
- Big rework to optimize the code for systems with hundreds of CPUs
and thousands of breakpoints:
- Replace the nr_bp_mutex global mutex with the bp_cpuinfo_sem
per-CPU rwsem that is read-locked during most of the key
operations.
- Improve the O(#cpus * #tasks) logic in toggle_bp_slot() and
fetch_bp_busy_slots().
- Apply micro-optimizations & cleanups.
- Misc cleanups & enhancements"
* tag 'perf-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutex
perf: Fix pmu_filter_match()
perf: Fix lockdep_assert_event_ctx()
perf/x86/amd/lbr: Adjust LBR regardless of filtering
perf/x86/utils: Fix uninitialized var in get_branch_type()
perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header file
perf/x86/amd: Support PERF_SAMPLE_PHY_ADDR
perf/x86/amd: Support PERF_SAMPLE_ADDR
perf/x86/amd: Support PERF_SAMPLE_{WEIGHT|WEIGHT_STRUCT}
perf/x86/amd: Support PERF_SAMPLE_DATA_SRC
perf/x86/amd: Add IBS OP_DATA2 DataSrc bit definitions
perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO}
perf/x86/uncore: Add new Raptor Lake S support
perf/x86/cstate: Add new Raptor Lake S support
perf/x86/msr: Add new Raptor Lake S support
perf/x86: Add new Raptor Lake S support
bpf: Check flags for branch stack in bpf_read_branch_records helper
perf, hw_breakpoint: Fix use-after-free if perf_event_open() fails
perf: Use sample_flags for raw_data
perf: Use sample_flags for addr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull file_inode() updates from Al Vrio:
"whack-a-mole: cropped up open-coded file_inode() uses..."
* tag 'pull-file_inode' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
orangefs: use ->f_mapping
_nfs42_proc_copy(): use ->f_mapping instead of file_inode()->i_mapping
dma_buf: no need to bother with file_inode()->i_mapping
nfs_finish_open(): don't open-code file_inode()
bprm_fill_uid(): don't open-code file_inode()
sgx: use ->f_mapping...
exfat_iterate(): don't open-code file_inode(file)
ibmvmc: don't open-code file_inode()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The usual round of smaller fixes and cleanups all over the tree
* tag 'x86_cleanups_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Include the header of init_ia32_feat_ctl()'s prototype
x86/uaccess: Improve __try_cmpxchg64_user_asm() for x86_32
x86: Fix various duplicate-word comment typos
x86/boot: Remove superfluous type casting from arch/x86/boot/bitops.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Borislav Petkov:
- More work by James Morse to disentangle the resctrl filesystem
generic code from the architectural one with the endgoal of plugging
ARM's MPAM implementation into it too so that the user interface
remains the same
- Properly restore the MSR_MISC_FEATURE_CONTROL value instead of
blindly overwriting it to 0
* tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes
x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's boot_cpu_data
x86/resctrl: Rename and change the units of resctrl_cqm_threshold
x86/resctrl: Move get_corrected_mbm_count() into resctrl_arch_rmid_read()
x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()
x86/resctrl: Pass the required parameters into resctrl_arch_rmid_read()
x86/resctrl: Abstract __rmid_read()
x86/resctrl: Allow per-rmid arch private storage to be reset
x86/resctrl: Add per-rmid arch private storage for overflow and chunks
x86/resctrl: Calculate bandwidth from the previous __mon_event_count() chunks
x86/resctrl: Allow update_mba_bw() to update controls directly
x86/resctrl: Remove architecture copy of mbps_val
x86/resctrl: Switch over to the resctrl mbps_val list
x86/resctrl: Create mba_sc configuration in the rdt_domain
x86/resctrl: Abstract and use supports_mba_mbps()
x86/resctrl: Remove set_mba_sc()s control array re-initialisation
x86/resctrl: Add domain offline callback for resctrl work
x86/resctrl: Group struct rdt_hw_domain cleanup
x86/resctrl: Add domain online callback for resctrl work
x86/resctrl: Merge mon_capable and mon_enabled
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x75 microcode loader updates from Borislav Petkov:
- Get rid of a single ksize() usage
- By popular demand, print the previous microcode revision an update
was done over
- Remove more code related to the now gone MICROCODE_OLD_INTERFACE
- Document the problems stemming from microcode late loading
* tag 'x86_microcode_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Track patch allocation size explicitly
x86/microcode: Print previous version of microcode after reload
x86/microcode: Remove ->request_microcode_user()
x86/microcode: Document the whole late loading problem
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Fix the APEI MCE callback handler to consult the hardware about the
granularity of the memory error instead of hard-coding it
- Offline memory pages on Intel machines after 2 errors reported per
page
* tag 'ras_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Retrieve poison range from hardware
RAS/CEC: Reduce offline page threshold for Intel systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX update from Borislav Petkov:
- Improve the documentation of a couple of SGX functions handling
backing storage
* tag 'x86_sgx_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Improve comments for sgx_encl_lookup/alloc_backing()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform update from Borislav Petkov:
"A single x86/platform improvement when the kernel is running as an
ACRN guest:
- Get TSC and CPU frequency from CPUID leaf 0x40000010 when the
kernel is running as a guest on the ACRN hypervisor"
* tag 'x86_platform_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acrn: Set up timekeeping
|
|
Instrumenting some files with KMSAN will result in kernel being unable to
link, boot or crashing at runtime for various reasons (e.g. infinite
recursion caused by instrumentation hooks calling instrumented code
again).
Completely omit KMSAN instrumentation in the following places:
- arch/x86/boot and arch/x86/realmode/rm, as KMSAN doesn't work for i386;
- arch/x86/entry/vdso, which isn't linked with KMSAN runtime;
- three files in arch/x86/kernel - boot problems;
- arch/x86/mm/cpu_entry_area.c - recursion.
Link: https://lkml.kernel.org/r/20220915150417.722975-33-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Merge upstream to get RAPTORLAKE_S
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
Include the header containing the prototype of init_ia32_feat_ctl(),
solving the following warning:
$ make W=1 arch/x86/kernel/cpu/feat_ctl.o
arch/x86/kernel/cpu/feat_ctl.c:112:6: warning: no previous prototype for ‘init_ia32_feat_ctl’ [-Wmissing-prototypes]
112 | void init_ia32_feat_ctl(struct cpuinfo_x86 *c)
This warning appeared after commit
5d5103595e9e5 ("x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup")
had moved the function init_ia32_feat_ctl()'s prototype from
arch/x86/kernel/cpu/cpu.h to arch/x86/include/asm/cpu.h.
Note that, before the commit mentioned above, the header include "cpu.h"
(arch/x86/kernel/cpu/cpu.h) was added by commit
0e79ad863df43 ("x86/cpu: Fix a -Wmissing-prototypes warning for init_ia32_feat_ctl()")
solely to fix init_ia32_feat_ctl()'s missing prototype. So, the header
include "cpu.h" is no longer necessary.
[ bp: Massage commit message. ]
Fixes: 5d5103595e9e5 ("x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup")
Signed-off-by: Luciano Leão <lucianorsleao@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nícolas F. R. A. Prado <n@nfraprado.net>
Link: https://lore.kernel.org/r/20220922200053.1357470-1-lucianorsleao@gmail.com
|
|
resctrl_arch_rmid_read() returns a value in chunks, as read from the
hardware. This needs scaling to bytes by mon_scale, as provided by
the architecture code.
Now that resctrl_arch_rmid_read() performs the overflow and corrections
itself, it may as well return a value in bytes directly. This allows
the accesses to the architecture specific 'hw' structure to be removed.
Move the mon_scale conversion into resctrl_arch_rmid_read().
mbm_bw_count() is updated to calculate bandwidth from bytes.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-22-james.morse@arm.com
|
|
resctrl_rmid_realloc_threshold can be set by user-space. The maximum
value is specified by the architecture.
Currently max_threshold_occ_write() reads the maximum value from
boot_cpu_data.x86_cache_size, which is not portable to another
architecture.
Add resctrl_rmid_realloc_limit to describe the maximum size in bytes
that user-space can set the threshold to.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-21-james.morse@arm.com
|
|
resctrl_cqm_threshold is stored in a hardware specific chunk size,
but exposed to user-space as bytes.
This means the filesystem parts of resctrl need to know how the hardware
counts, to convert the user provided byte value to chunks. The interface
between the architecture's resctrl code and the filesystem ought to
treat everything as bytes.
Change the unit of resctrl_cqm_threshold to bytes. resctrl_arch_rmid_read()
still returns its value in chunks, so this needs converting to bytes.
As all the users have been touched, rename the variable to
resctrl_rmid_realloc_threshold, which describes what the value is for.
Neither r->num_rmid nor hw_res->mon_scale are guaranteed to be a power
of 2, so the existing code introduces a rounding error from resctrl's
theoretical fraction of the cache usage. This behaviour is kept as it
ensures the user visible value matches the value read from hardware
when the rmid will be reallocated.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-20-james.morse@arm.com
|
|
resctrl_arch_rmid_read() is intended as the function that an
architecture agnostic resctrl filesystem driver can use to
read a value in bytes from a counter. Currently the function returns
the MBM values in chunks directly from hardware. When reading a bandwidth
counter, get_corrected_mbm_count() must be used to correct the
value read.
get_corrected_mbm_count() is architecture specific, this work should be
done in resctrl_arch_rmid_read().
Move the function calls. This allows the resctrl filesystems's chunks
value to be removed in favour of the architecture private version.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-19-james.morse@arm.com
|
|
resctrl_arch_rmid_read() is intended as the function that an
architecture agnostic resctrl filesystem driver can use to
read a value in bytes from a counter. Currently the function returns
the MBM values in chunks directly from hardware. When reading a bandwidth
counter, mbm_overflow_count() must be used to correct for any possible
overflow.
mbm_overflow_count() is architecture specific, its behaviour should
be part of resctrl_arch_rmid_read().
Move the mbm_overflow_count() calls into resctrl_arch_rmid_read().
This allows the resctrl filesystems's prev_msr to be removed in
favour of the architecture private version.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-18-james.morse@arm.com
|
|
resctrl_arch_rmid_read() is intended as the function that an
architecture agnostic resctrl filesystem driver can use to
read a value in bytes from a hardware register. Currently the function
returns the MBM values in chunks directly from hardware.
To convert this to bytes, some correction and overflow calculations
are needed. These depend on the resource and domain structures.
Overflow detection requires the old chunks value. None of this
is available to resctrl_arch_rmid_read(). MPAM requires the
resource and domain structures to find the MMIO device that holds
the registers.
Pass the resource and domain to resctrl_arch_rmid_read(). This makes
rmid_dirty() too big. Instead merge it with its only caller, and the
name is kept as a local variable.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-17-james.morse@arm.com
|
|
__rmid_read() selects the specified eventid and returns the counter
value from the MSR. The error handling is architecture specific, and
handled by the callers, rdtgroup_mondata_show() and __mon_event_count().
Error handling should be handled by architecture specific code, as
a different architecture may have different requirements. MPAM's
counters can report that they are 'not ready', requiring a second
read after a short delay. This should be hidden from resctrl.
Make __rmid_read() the architecture specific function for reading
a counter. Rename it resctrl_arch_rmid_read() and move the error
handling into it.
A read from a counter that hardware supports but resctrl does not
now returns -EINVAL instead of -EIO from the default case in
__mon_event_count(). It isn't possible for user-space to see this
change as resctrl doesn't expose counters it doesn't support.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-16-james.morse@arm.com
|
